Remove RCng files that were brought in from NetBSD, but we ended up not

using them (or did and no longer do).

27 files changed, 0 insertions, 1188 deletions

diff --git a/etc/rc.d/altqd b/etc/rc.d/altqd
deleted file mode 100644
index c7e626e..0000000
--- a/etc/rc.d/altqd
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: altqd,v 1.2 2002/03/22 04:33:58 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: altqd
-# REQUIRE: network mountcritlocal dhclient
-# BEFORE:  NETWORKING
-# KEYWORD: shutdown
-
-. /etc/rc.subr
-
-name="altqd"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/altq.conf"
-extra_commands="reload"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/dhcpd b/etc/rc.d/dhcpd
deleted file mode 100755
index 55b1f4a..0000000
--- a/etc/rc.d/dhcpd
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: dhcpd,v 1.5 2002/03/22 04:33:58 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: dhcpd
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="dhcpd"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/${name}.conf /var/db/${name}.leases"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/dhcrelay b/etc/rc.d/dhcrelay
deleted file mode 100755
index d78afa6..0000000
--- a/etc/rc.d/dhcrelay
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: dhcrelay,v 1.5 2002/03/22 04:33:58 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: dhcrelay
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="dhcrelay"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/downinterfaces b/etc/rc.d/downinterfaces
deleted file mode 100644
index 6a5c943..0000000
--- a/etc/rc.d/downinterfaces
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: downinterfaces,v 1.2 2001/09/04 20:40:40 martin Exp $
-#
-
-# PROVIDE: downinterfaces
-# KEYWORD: shutdown
-
-if [ "x$1" != "xstop" ]; then exit 0; fi
-
-. /etc/rc.conf
-
-tmp=`ifconfig -lu`
-iflist=""
-for int in $tmp; do
-	case $int in
-	pppoe*)	iflist="$iflist $int"
-		;;
-	esac
-done
-iflist="$iflist $force_down_interfaces"
-if [ "$iflist" = "" ] || [ "$iflist" = " " ]; then exit 0; fi
-
-echo "Shutting down interfaces:$iflist"
-for int in $iflist; do
-	ifconfig $int down
-done
diff --git a/etc/rc.d/gated b/etc/rc.d/gated
deleted file mode 100755
index 7a11e8c..0000000
--- a/etc/rc.d/gated
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: gated,v 1.3 2000/05/13 08:45:06 lukem Exp $
-#
-
-# PROVIDE: gated
-# REQUIRE: DAEMON
-
-. /etc/rc.subr
-
-name="gated"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/${name}.conf"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/ifwatchd b/etc/rc.d/ifwatchd
deleted file mode 100644
index ec23ce2..0000000
--- a/etc/rc.d/ifwatchd
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD$
-#
-
-# PROVIDE: ifwatchd
-# REQUIRE: mountcritremote network
-
-. /etc/rc.subr
-
-name="ifwatchd"
-rcvar=$name
-command="/usr/sbin/${name}"
-
-load_rc_config $name
-run_rc_command "$1"
-
diff --git a/etc/rc.d/kdc b/etc/rc.d/kdc
deleted file mode 100755
index 43a5005..0000000
--- a/etc/rc.d/kdc
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: kdc,v 1.5 2002/03/22 04:33:58 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: kdc
-# REQUIRE: NETWORKING
-# BEFORE:  SERVERS
-
-. /etc/rc.subr
-
-name="kdc"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/krb5.conf"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/lkm1 b/etc/rc.d/lkm1
deleted file mode 100755
index e252909..0000000
--- a/etc/rc.d/lkm1
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: lkm1,v 1.6 2000/10/09 06:11:38 nisimura Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: beforenetlkm
-# REQUIRE: root bootconf
-
-. /etc/rc.subr
-
-name="lkm1"
-rcvar="lkm"
-start_cmd="lkm1_start"
-stop_cmd="lkm1_stop"
-
-lkm1_start()
-{
-#		load kernel modules specified in /etc/lkm.conf if the /usr
-#		filesystem is already present with "/" or can be mounted now
-#
-	if [ -f /etc/rc.lkm ]; then
-		mount /usr >/dev/null 2>&1
-		if [ -x /usr/bin/ld ]; then
-			lkmstage=BEFORENET
-			set start ; . /etc/rc.lkm
-		fi
-	fi
-}
-
-lkm1_stop()
-{
-	if [ -f /etc/rc.lkm ] && [ -x /usr/bin/ld ]; then
-		lkmstage=BEFORENET
-		set stop ; . /etc/rc.lkm
-	fi
-}
-
-load_rc_config lkm
-run_rc_command "$1"
diff --git a/etc/rc.d/lkm2 b/etc/rc.d/lkm2
deleted file mode 100755
index 23608df..0000000
--- a/etc/rc.d/lkm2
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: lkm2,v 1.4 2000/09/19 13:04:38 lukem Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: beforemountlkm
-# REQUIRE: syslogd
-
-. /etc/rc.subr
-
-name="lkm2"
-rcvar="lkm"
-start_cmd="lkm2_start"
-stop_cmd="lkm2_stop"
-
-#		load kernel modules specified in /etc/lkm.conf
-#
-lkm2_start()
-{
-	if [ -r /etc/rc.lkm ]; then
-		lkmstage=BEFOREMOUNT
-		set start ; . /etc/rc.lkm
-	else
-		warn "/etc/rc.lkm not found; LKMs not loaded."
-	fi
-}
-
-lkm2_stop()
-{
-	if [ -r /etc/rc.lkm ]; then
-		lkmstage=BEFOREMOUNT
-		set stop ; . /etc/rc.lkm
-	fi
-}
-
-load_rc_config lkm
-run_rc_command "$1"
diff --git a/etc/rc.d/lkm3 b/etc/rc.d/lkm3
deleted file mode 100755
index a9d6efd..0000000
--- a/etc/rc.d/lkm3
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: lkm3,v 1.6 2002/03/22 04:33:58 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: aftermountlkm
-# REQUIRE: mountall
-# BEFORE:  DAEMON
-
-. /etc/rc.subr
-
-name="lkm3"
-rcvar="lkm"
-start_cmd="do_lkm3 start"
-stop_cmd="do_lkm3 stop"
-
-do_lkm3()
-{
-	#	(un)load kernel modules specified in /etc/lkm.conf
-	#
-	if [ -f /etc/rc.lkm ]; then
-		lkmstage=AFTERMOUNT
-		set $1 ; . /etc/rc.lkm
-	fi
-}
-
-load_rc_config lkm
-run_rc_command "$1"
diff --git a/etc/rc.d/mixerctl b/etc/rc.d/mixerctl
deleted file mode 100755
index 16fcbb9..0000000
--- a/etc/rc.d/mixerctl
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: mixerctl,v 1.2 2002/06/02 19:04:10 jmcneill Exp $
-#
-
-# PROVIDE: mixerctl
-# REQUIRE: mountcritremote
-
-. /etc/rc.subr
-
-name="mixerctl"
-start_cmd="mixerctl_start"
-stop_cmd=":"
-
-mixerctl_start()
-{
-	if [ -r /etc/mixerctl.conf ]; then
-		echo "Setting mixerctl variables..."
-		while read setting; do
-			mixerctl -n -w $setting
-		done < /etc/mixerctl.conf
-	fi
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/mopd b/etc/rc.d/mopd
deleted file mode 100755
index f6a6710..0000000
--- a/etc/rc.d/mopd
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: mopd,v 1.5 2002/03/22 04:33:59 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: mopd
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="mopd"
-rcvar=$name
-command="/usr/sbin/${name}"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/mountall b/etc/rc.d/mountall
deleted file mode 100755
index 6ce01f7..0000000
--- a/etc/rc.d/mountall
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: mountall,v 1.3 2000/05/13 08:45:07 lukem Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: mountall
-# REQUIRE: beforemountlkm
-
-. /etc/rc.subr
-
-name="mountall"
-start_cmd="echo 'Mounting all filesystems...'; mount -a"
-stop_cmd="echo 'Unmounting all filesystems...'; umount -a"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/ndbootd b/etc/rc.d/ndbootd
deleted file mode 100755
index e24f8fc..0000000
--- a/etc/rc.d/ndbootd
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD$
-#
-
-# PROVIDE: ndbootd
-# REQUIRE: DAEMON
-
-. /etc/rc.subr
-
-name="ndbootd"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/ethers"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/network b/etc/rc.d/network
deleted file mode 100755
index ce3336b..0000000
--- a/etc/rc.d/network
+++ /dev/null
@@ -1,387 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: network,v 1.29 2001/01/11 17:56:16 itojun Exp $
-# $FreeBSD$
-
-# PROVIDE: network
-# REQUIRE: ipfilter ipsec mountcritlocal root tty sysctl
-
-. /etc/rc.subr
-
-name="network"
-start_cmd="network_start"
-stop_cmd="network_stop"
-
-network_start()
-{
-	# set hostname, turn on network
-	#
-	echo "Starting network."
-
-	# If $hostname is set, use it for my Internet name,
-	# otherwise use /etc/myname
-	#
-	if [ -z "$hostname" ] && [ -f /etc/myname ]; then
-		hostname=`cat /etc/myname`
-	fi
-	if [ -n "$hostname" ]; then
-		echo "Hostname: $hostname"
-		/bin/hostname $hostname
-	else
-		# Don't warn about it if we're going to run
-		# DHCP later, as we will probably get the
-		# hostname at that time.
-		#
-		if ! checkyesno dhclient && [ -z "`/bin/hostname`" ]; then
-			warn "\$hostname not set."
-		fi
-	fi
-
-	# Check $domainname first, then /etc/defaultdomain,
-	# for NIS/YP domain name
-	#
-	if [ -z "$domainname" ] && [ -f /etc/defaultdomain ]; then
-		domainname=`cat /etc/defaultdomain`
-	fi
-	if [ -n "$domainname" ]; then
-		echo "NIS domainname: $domainname"
-		domainname $domainname
-	fi
-
-	# Flush all routes just to make sure it is clean
-	if checkyesno flushroutes; then
-		route -n flush
-	fi
-
-	# Set the address for the first loopback interface, so that the
-	# auto-route from a newly configured interface's address to lo0
-	# works correctly.
-	#
-	# NOTE: obscure networking problems may occur if lo0 isn't configured...
-	#
-	ifconfig lo0 inet 127.0.0.1
-
-	# According to RFC1122, 127.0.0.0/8 should not leave the node.
-	#
-	route add -inet 127.0.0.0 -netmask 0xff000000 127.0.0.1 -reject
-
-	# IPv6 routing setups, and host/router mode selection.
-	#
-	if ifconfig lo0 inet6 >/dev/null 2>&1; then
-		# We have IPv6 support in kernel.
-
-		# disallow link-local unicast dest without outgoing scope
-		# identifiers.
-		#
-		route add -inet6 fe80:: -prefixlen 10 ::1 -reject
-
-		# disallow site-local unicast dest without outgoing scope
-		# identifiers.
-		# If you configure site-locals without scope id (it is
-		# permissible config for routers that are not on scope
-		# boundary), you may want to comment the following one out.
-		#
-		if ! checkyesno ip6sitelocal; then
-			route add -inet6 fec0:: -prefixlen 10 ::1 -reject
-		fi
-
-		# disallow "internal" addresses to appear on the wire.
-		#
-		route add -inet6 ::ffff:0.0.0.0 -prefixlen 96 ::1 -reject
-
-		# disallow packets to malicious IPv4 compatible prefix
-		#
-		route add -inet6 ::224.0.0.0 -prefixlen 100 ::1 -reject
-		route add -inet6 ::127.0.0.0 -prefixlen 104 ::1 -reject
-		route add -inet6 ::0.0.0.0 -prefixlen 104 ::1 -reject
-		route add -inet6 ::255.0.0.0 -prefixlen 104 ::1 -reject
-
-		# disallow packets to malicious 6to4 prefix
-		#
-		route add -inet6 2002:e000:: -prefixlen 20 ::1 -reject
-		route add -inet6 2002:7f00:: -prefixlen 24 ::1 -reject
-		route add -inet6 2002:0000:: -prefixlen 24 ::1 -reject
-		route add -inet6 2002:ff00:: -prefixlen 24 ::1 -reject
-
-		# Completely disallow packets to IPv4 compatible prefix.
-		# This may conflict with RFC1933 under following circumstances:
-		# (1) An IPv6-only KAME node tries to originate packets to IPv4
-		#     compatible destination.  The KAME node has no IPv4
-		#     compatible support.  Under RFC1933, it should transmit
-		#     native IPv6 packets toward IPv4 compatible destination,
-		#     hoping it would reach a router that forwards the packet
-		#     toward auto-tunnel interface.
-		# (2) An IPv6-only node originates a packet to IPv4 compatible
-		#     destination.  A KAME node is acting as an IPv6 router, and
-		#     asked to forward it.
-		# Due to rare use of IPv4 compatible address, and security
-		# issues with it, we disable it by default.
-		#
-		route add -inet6 ::0.0.0.0 -prefixlen 96 ::1 -reject
-
-		sysctl net.inet6.ip6.forwarding=0 >/dev/null
-		sysctl net.inet6.ip6.accept_rtadv=0 >/dev/null
-
-		# backward compatibility
-		#
-		if [ -z "$ip6mode" ] && [ -n "$ip6forwarding" ]; then
-			warn 'Please migrate to newer rc.conf' \
-			    '(use ip6mode, not ip6forwarding)'
-			if checkyesno ip6forwarding; then
-				ip6mode=router
-			elif checkyesno rtsol; then
-				ip6mode=autohost
-			else
-				ip6mode=host
-			fi
-		fi
-
-		case $ip6mode in
-		router)
-			echo 'IPv6 mode: router'
-			sysctl net.inet6.ip6.forwarding=1 >/dev/null
-			;;
-
-		autohost)
-			echo 'IPv6 mode: autoconfigured host'
-			sysctl net.inet6.ip6.accept_rtadv=1 >/dev/null
-			;;
-
-		host)
-			echo 'IPv6 mode: host'
-			;;
-
-		*)	echo 'WARNING: invalid value in ip6mode'
-			;;
-
-		esac
-	fi
-
-	# Configure all of the network interfaces listed in $net_interfaces;
-	# if $auto_ifconfig is YES, grab all interfaces from ifconfig.
-	# In the following, "xxN" stands in for interface names, like "le0".
-	# For any interfaces that has an $ifconfig_xxN variable associated,
-	# we do "ifconfig xxN $ifconfig_xxN".
-	# If there is no such variable, we take the contents of the file
-	# /etc/ifconfig.xxN, and run "ifconfig xxN" repeatedly, using each
-	# line of the file as the arguments for a separate "ifconfig"
-	# invocation.
-	#
-	# In order to configure an interface reasonably, you at the very least
-	# need to specify "[addr_family] [hostname]" (e.g "inet my.domain.org"),
-	# and probably a netmask (as in "netmask 0xffffffe0"). You will
-	# frequently need to specify a media type, as in "media UTP", for
-	# interface cards with multiple media connections that do not
-	# autoconfigure. See the ifconfig manual page for details.
-	#
-	# Note that /etc/ifconfig.xxN takes multiple lines.  The following
-	# configuration is possible:
-	#	inet 10.1.1.1 netmask 0xffffff00
-	#	inet 10.1.1.2 netmask 0xffffff00 alias
-	#	inet6 fec0::1 prefixlen 64 alias
-	#
-	# You can put shell script fragment into /etc/ifconfig.xxN by
-	# starting a line with "!".  Refer to ifconfig.if(5) for details.
-	#
-	if [ "$net_interfaces" != NO ]; then
-		if checkyesno auto_ifconfig; then
-			tmp=`ifconfig -l`
-			for cloner in `ifconfig -C 2>/dev/null`; do
-				for int in /etc/ifconfig.${cloner}[0-9]*; do
-					[ ! -f $int ] && break
-					tmp="$tmp ${int##*.}"
-				done
-			done
-		else
-			tmp="$net_interfaces"
-		fi
-		echo -n 'Configuring network interfaces:'
-		for int in $tmp; do
-			eval args=\$ifconfig_$int
-			if [ -n "$args" ]; then
-				echo -n " $int"
-				ifconfig $int $args
-			elif [ -f /etc/ifconfig.$int ]; then
-				echo -n " $int"
-				while read args; do
-					[ -z "$args" ] && continue
-					case "$args" in
-					"#"*)
-						;;
-					"!"*)
-						eval ${args#*!}
-						;;
-					*)
-						ifconfig $int $args
-						;;
-					esac
-				done < /etc/ifconfig.$int
-			else
-				if ! checkyesno auto_ifconfig; then
-					echo
-					warn \
-			"/etc/ifconfig.$int missing and ifconfig_$int not set;"
-					warn "interface $int not configured."
-				fi
-				continue
-			fi
-			configured_interfaces="$configured_interfaces $int"
-		done
-		echo "."
-	fi
-
-	# Check $defaultroute, then /etc/mygate, for the name of my gateway
-	# host. That name must be in /etc/hosts.
-	#
-	if [ -z "$defaultroute" ] && [ -f /etc/mygate ]; then
-		defaultroute=`cat /etc/mygate`
-	fi
-	if [ -n "$defaultroute" ]; then
-		route add default $defaultroute
-	fi
-
-	# Check if each configured interface xxN has an $ifaliases_xxN variable
-	# associated, then configure additional IP addresses for that interface.
-	# The variable contains a list of "address netmask" pairs, with
-	# "netmask" set to "-" if the interface default netmask is to be used.
-	#
-	# Note that $ifaliases_xxN works only with certain configurations and
-	# considered not recommended.  Use /etc/ifconfig.xxN if possible.
-	#
-	#
-	if [ -n "$configured_interfaces" ]; then
-		echo "Adding interface aliases:"
-		done_aliases_message=yes
-	fi
-	for int in $configured_interfaces; do
-		eval args=\$ifaliases_$int
-		if [ -n "$args" ]; then
-			set -- $args
-			while [ $# -ge 2 ]; do
-				addr=$1 ; net=$2 ; shift 2
-				if [ "$net" = "-" ]; then
-					# for compatibility only, obsolete
-					ifconfig $int inet alias $addr
-				else
-					ifconfig $int inet alias $addr \
-					    netmask $net
-				fi
-				# Use loopback, not the wire
-				route add $addr 127.0.0.1
-			done
-		fi
-	done
-
-	# /etc/ifaliases, if it exists, contains the names of additional IP
-	# addresses for each interface. It is formatted as a series of lines
-	# that contain
-	#	address interface netmask
-	#
-	# Note that /etc/ifaliases works only with certain cases only and its
-	# use is not recommended.  Use /etc/ifconfig.xxN instead.
-	#
-	#
-	if [ -f /etc/ifaliases ]; then
-		if [ "$done_aliases_message" != yes ]; then
-			echo "Adding interface aliases:"
-		fi
-		while read addr int net; do
-			if [ -z "$net" ]; then
-				# for compatibility only, obsolete
-				ifconfig $int inet alias $addr
-			else
-				ifconfig $int inet alias $addr netmask $net
-			fi
-			# use loopback, not the wire
-			route add $addr 127.0.0.1
-		done < /etc/ifaliases
-	fi
-
-	# IPv6 interface autoconfiguration.
-	#
-	if ifconfig lo0 inet6 >/dev/null 2>&1; then
-		# wait till DAD is completed. always invoke it in case
-		# if are configured manually by ifconfig
-		#
-		dadcount=`sysctl -n net.inet6.ip6.dad_count 2>/dev/null`
-		sleep $dadcount
-		sleep 1
-
-		if checkyesno rtsol; then
-			if [ "$ip6mode" = "autohost" ]; then
-				echo 'Sending router solicitation...'
-				rtsol $rtsol_flags
-			else
-				echo
-				warn \
-			    "ip6mode must be set to 'autohost' to use rtsol."
-			fi
-
-			# wait till DAD is completed, for global addresses
-			# configured by router advert message.
-			#
-			sleep $dadcount
-			sleep 1
-		fi
-	fi
-
-	# XXX this must die
-	if [ -s /etc/netstart.local ]; then
-		sh /etc/netstart.local start
-	fi
-}
-
-network_stop()
-{
-	echo "Stopping network."
-
-	# XXX this must die
-	if [ -s /etc/netstart.local ]; then
-		sh /etc/netstart.local stop
-	fi
-
-	echo "Deleting aliases."
-	if [ -f /etc/ifaliases ]; then
-		while read addr int net; do
-			ifconfig $int inet delete $addr
-		done < /etc/ifaliases
-	fi
-
-	for int in `ifconfig -lu`; do
-		eval args=\$ifaliases_$int
-		if [ -n "$args" ]; then
-			set -- $args
-			while [ $# -ge 2 ]; do
-				addr=$1 ; net=$2 ; shift 2
-				ifconfig $int inet delete $addr
-			done
-		fi
-	done
-
-	# down interfaces
-	#
-	echo -n 'Downing network interfaces:'
-	if [ "$net_interfaces" != NO ]; then
-		if checkyesno auto_ifconfig; then
-			tmp=`ifconfig -l`
-		else
-			tmp="$net_interfaces"
-		fi
-		for int in $tmp; do
-			eval args=\$ifconfig_$int
-			if [ -n "$args" ] || [ -f /etc/ifconfig.$int ]; then
-				echo -n " $int"
-				ifconfig $int down
-			fi
-		done
-		echo "."
-	fi
-
-	# flush routes
-	#
-	route -n flush
-
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/poffd b/etc/rc.d/poffd
deleted file mode 100644
index 5b5668a..0000000
--- a/etc/rc.d/poffd
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: poffd,v 1.1 2001/01/14 15:37:22 minoura Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: poffd
-# REQUIRE: DAEMON
-
-. /etc/rc.subr
-
-name="poffd"
-rcvar=$name
-command="/usr/sbin/${name}"
-start_precmd="test -c /dev/pow0"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/postfix b/etc/rc.d/postfix
deleted file mode 100755
index 807072b..0000000
--- a/etc/rc.d/postfix
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: postfix,v 1.6 2002/02/12 02:19:27 lukem Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: mail
-# REQUIRE: LOGIN
-#	we make mail start late, so that things like .forward's are not
-#	processed until the system is fully operational
-
-. /etc/rc.subr
-
-name="postfix"
-rcvar=$name
-required_files="/etc/${name}/main.cf"
-start_precmd="postfix_precmd"
-start_cmd="${name} start"
-stop_cmd="${name} stop"
-reload_cmd="${name} reload"
-extra_commands="reload"
-spooletcdir="/var/spool/${name}/etc"
-required_dirs=$spooletcdir
-
-postfix_precmd()
-{
-	# As this is called after the is_running and required_dir checks
-	# are made in run_rc_command(), we can safely assume ${spooletcdir}
-	# exists and postfix isn't running at this point (unless forcestart
-	# is used).
-	#
-
-	for f in localtime resolv.conf services; do
-		if [ -f /etc/$f ]; then
-			cmp -s /etc/$f ${spooletcdir}/$f || \
-			    cp -p /etc/$f ${spooletcdir}/$f
-		fi
-	done
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/racoon b/etc/rc.d/racoon
deleted file mode 100755
index aaa264a..0000000
--- a/etc/rc.d/racoon
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: racoon,v 1.3 2002/03/22 04:33:59 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: ike
-# REQUIRE: isdnd kdc ppp
-# BEFORE:  SERVERS
-
-. /etc/rc.subr
-
-name="racoon"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/racoon/racoon.conf"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/raidframe b/etc/rc.d/raidframe
deleted file mode 100755
index 53156dc..0000000
--- a/etc/rc.d/raidframe
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: raidframe,v 1.6 2002/01/27 14:16:33 lukem Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: disks
-
-. /etc/rc.subr
-
-name="raidframe"
-start_cmd="raidframe_start"
-stop_cmd=":"
-
-raidframe_start()
-{
-	# Configure non-auto-configured raid devices.
-	# Ensure order by globbing raid[0-9].conf before raid[0-9][0-9].conf.
-	#
-	for cfg in /etc/raid[0-9].conf /etc/raid[0-9][0-9].conf ; do
-		[ ! -f $cfg ] && continue
-		dev=${cfg##*/}
-		dev=${dev%%.conf}
-		raidctl -c $cfg $dev
-	done
-
-	# Initiate parity/mirror reconstruction as needed, in the background.
-	#
-	(
-		for dev in `sysctl -n hw.disknames`; do
-			case $dev in
-			raid[0-9]*)
-				raidctl -P $dev
-				;;
-			esac
-		done
-	) &
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/rbootd b/etc/rc.d/rbootd
deleted file mode 100755
index 423c5c0..0000000
--- a/etc/rc.d/rbootd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: rbootd,v 1.6 2002/03/22 04:34:00 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: rbootd
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="rbootd"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/etc/${name}.conf"
-extra_commands="reload"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/rtsold b/etc/rc.d/rtsold
deleted file mode 100755
index 8645816..0000000
--- a/etc/rc.d/rtsold
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: rtsold,v 1.5 2002/03/22 04:34:00 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: rtsold
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="rtsold"
-rcvar=$name
-command="/usr/sbin/${name}"
-start_precmd="rtsold_precmd"
-
-rtsold_precmd()
-{
-	if [ "$ip6mode" != "autohost" ]; then
-		warn "\$ip6mode must be set to 'autohost' to use ${name}."
-		return 1
-	fi
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/screenblank b/etc/rc.d/screenblank
deleted file mode 100755
index de2af4f..0000000
--- a/etc/rc.d/screenblank
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: screenblank,v 1.5 2002/03/22 04:34:00 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: screenblank
-# REQUIRE: DAEMON
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="screenblank"
-rcvar=$name
-command="/usr/sbin/${name}"
-pidfile="/var/run/${name}.pid"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/swap2 b/etc/rc.d/swap2
deleted file mode 100755
index 5f3bd6f..0000000
--- a/etc/rc.d/swap2
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: swap2,v 1.6 2002/03/22 04:34:00 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: nonlocalswap
-# REQUIRE: mountcritremote
-# BEFORE:  DAEMON
-
-. /etc/rc.subr
-
-name="swap2"
-start_cmd="swap2_start"
-
-swap2_start()
-{
-	#	"Critical" file systems are now mounted.  Go ahead and swap
-	#	to files now, since they will be residing in the critical file
-	#	systems (or, at least, they should be...).
-	#	Check for no swap, and warn about it unless that is desired.
-	#
-	swapctl -A -t noblk;
-	if ! checkyesno no_swap; then
-		if swapctl -s | grep "no swap devices configured" > /dev/null;
-		then
-			warn "No swap space configured!"
-		fi
-	fi
-}
-
-#		Remove all non-block-type swap devices
-#
-stop_cmd="swapctl -U -t noblk"
-
-load_rc_config swap
-run_rc_command "$1"
diff --git a/etc/rc.d/sysdb b/etc/rc.d/sysdb
deleted file mode 100755
index 7d07235..0000000
--- a/etc/rc.d/sysdb
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: sysdb,v 1.9 2002/03/22 04:34:00 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: sysdb
-# REQUIRE: mountcritremote
-# BEFORE:  DAEMON
-
-. /etc/rc.subr
-
-name="sysdb"
-start_cmd="sysdb_start"
-stop_cmd=":"
-
-sysdb_start()
-{
-	#	Build ps databases. If this kernel supports
-	#	machdep.booted_kernel, use that to build the KVM db so dmesg
-	#	will run work when we boot /netbsd.new, etc.
-	#
-	echo "Building databases..."
-	booted_kernel=`sysctl -n machdep.booted_kernel 2>/dev/null`
-	kvm_mkdb "${booted_kernel:-/netbsd}"
-	dev_mkdb
-
-	#	Re-create /var/run/utmp, which is deleted by mountcritlocal
-	#	but can't be recreated by it because install and chown may
-	#	not be available then (possibly no /usr).
-	#
-	install -c -m 664 -g utmp /dev/null /var/run/utmp
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/wscons b/etc/rc.d/wscons
deleted file mode 100755
index 36fd1b1..0000000
--- a/etc/rc.d/wscons
+++ /dev/null
@@ -1,170 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: wscons,v 1.9 2002/04/26 00:06:54 lukem Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: wscons
-# REQUIRE: mountcritremote
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="wscons"
-rcvar=$name
-start_cmd="wscons_start"
-stop_cmd=":"
-
-wscons_start()
-{
-	wscfg=/usr/sbin/wsconscfg
-	wsfld=/usr/sbin/wsfontload
-	wsctl=/sbin/wsconsctl
-	config=/etc/wscons.conf
-	usage="Usage: wsconfig [-n] [-f configfile] [-font fontpgm] [-screen screenpgm]"
-	DOIT=
-
-	while [ $# -gt 0 ]; do
-		case $1 in
-			-n)
-				DOIT=echo
-				;;
-			-f)
-				config=$2
-				shift
-				;;
-			-font)
-				wsfld=$2
-				shift
-				;;
-			-screen)
-				wscfg=$2
-				shift
-				;;
-			*)
-				echo $usage
-				exit 1
-				;;
-		esac
-		shift
-	done
-
-
-	# args mean:
-	#	screen idx scr emul
-	#	font   name width height enc file
-	( while read type arg1 arg2 arg3 arg4 arg5; do
-		case "$type" in
-			\#*|"")
-				continue
-				;;
-
-			font)
-				name=$arg1
-				width=$arg2
-				height=$arg3
-				enc=$arg4
-				file=$arg5
-				cmd=$wsfld
-
-				case $width in
-					-)
-						;;
-					*)
-						cmd="$cmd -w $width"
-						;;
-				esac
-				case $height in
-					-)
-						;;
-					*)
-						cmd="$cmd -h $height"
-						;;
-				esac
-				case $enc in
-					-)
-						;;
-					*)
-						cmd="$cmd -e $enc"
-						;;
-				esac
-				cmd="$cmd -N $name $file"
-				eval $DOIT $cmd
-				;;
-
-			screen)
-				idx=$arg1
-				scr=$arg2
-				emul=$arg3
-				cmd=$wscfg
-
-				case $scr in
-					-)
-						;;
-					*)
-						cmd="$cmd -t $scr"
-						;;
-				esac
-				case $emul in
-					-)
-						;;
-					*)
-						cmd="$cmd -e $emul"
-						;;
-				esac
-				cmd="$cmd $idx"
-				eval $DOIT $cmd
-				;;
-
-			keyboard)
-				kbd=$arg1
-				cmd=$wscfg
-				case $kbd in
-					-|auto)
-						cmd="$cmd -k"
-						;;
-					*)
-						cmd="$cmd -k $kbd"
-						;;
-				esac
-				eval $DOIT $cmd
-				;;
-
-			encoding)
-				map=$arg1
-				cmd="$wsctl -w \"encoding=$map\""
-				eval $DOIT $cmd
-				;;
-
-			mapfile)
-				mapfile=$arg1
-				( while read entry; do
-					case "$entry" in
-						\#*|"")
-						continue
-						;;
-					*)
-						cmd="$wsctl -w \"map+=$entry\""
-						cmd="$cmd >/dev/null"
-						eval $DOIT $cmd
-						;;
-					esac
-				done ) < $mapfile
-				;;
-
-			mux)
-				cmd="$wscfg -m $arg1"
-				eval $DOIT $cmd
-				;;
-
-			setvar)
-				cmd="$wsctl -w $arg1"
-				eval $DOIT $cmd
-				;;
-
-		esac
-	done ) < $config
-}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/xdm b/etc/rc.d/xdm
deleted file mode 100755
index a5c6b76..0000000
--- a/etc/rc.d/xdm
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: xdm,v 1.5 2000/07/17 15:24:48 lukem Exp $
-#
-
-# PROVIDE: xdm
-# REQUIRE: DAEMON LOGIN wscons
-# KEYWORD: shutdown
-
-. /etc/rc.subr
-
-name="xdm"
-rcvar=$name
-command="/usr/X11R6/bin/${name}"
-pidfile="/var/run/${name}.pid"
-required_files="/usr/X11R6/lib/X11/xdm/xdm-config"
-extra_commands="reload"
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/etc/rc.d/xfs b/etc/rc.d/xfs
deleted file mode 100755
index a0692fa..0000000
--- a/etc/rc.d/xfs
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: xfs,v 1.6 2002/03/22 04:34:01 thorpej Exp $
-# $FreeBSD$
-#
-
-# PROVIDE: xfs
-# REQUIRE: mountall cleartmp
-# BEFORE:  LOGIN
-
-. /etc/rc.subr
-
-name="xfs"
-rcvar=$name
-command="/usr/X11R6/bin/${name}"
-command_args="& sleep 2"
-required_files="/usr/X11R6/lib/X11/fs/config"
-extra_commands="reload"
-
-load_rc_config $name
-run_rc_command "$1"