1. Display message both before everything and after install, then sleep 10

   to make sure user reads it, about rebuilding kdelibs, and generally, all
   of KDE that is installed after the installation.
2. Bump PORTREVISION because of the critical nature of this problem.

PR:		41206

12 files changed, 116 insertions, 48 deletions

diff --git a/x11-toolkits/qt30/Makefile b/x11-toolkits/qt30/Makefile
index 82afe81..2aee19e 100644
--- a/x11-toolkits/qt30/Makefile
+++ b/x11-toolkits/qt30/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME?=	qt
 PORTVERSION?=	3.0.5
+PORTREVISION?=  1
 CATEGORIES?=	x11-toolkits
 MASTER_SITES=	ftp://ftp.trolltech.com/qt/source/ \
 		ftp://ftp.chg.ru/pub/X11/qt/source/
@@ -33,7 +34,6 @@ USE_GMAKE=	yes
 USE_REINPLACE=	yes
 REINPLACE_ARGS=	-i ""
 USE_X_PREFIX=	yes
-USE_NEWGCC=	yes
 HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	-prefix ${QT_PREFIX} \
 		-shared -qt-gif -system-zlib \
@@ -54,7 +54,7 @@ PLIST_SUB+=	OPENGL=""
 PKGNAMESUFFIX=	-opengl
 BROKEN=	"Using WITH_OPENGL causes DRI to fail in mysterious ways"
 .else
-PKGMESSAGE=${NONEXISTENT}
+PKGMESSAGE=	pkg-message-upgrade
 PLIST_SUB+=	OPENGL="@comment "
 CONFIGURE_ARGS+=-disable-opengl
 .endif
@@ -73,14 +73,10 @@ CFLAGS+=	-O0
 BROKEN=		"The QT 3.x port does not support any XFree86 < 4.x"
 .endif
 
-.if defined(WITH_OPENGL)
-# Display WITH_OPENGL advisory.
+SLEEP=/bin/sleep
 pre-everything:
-	@${ECHO_MSG} '===> **************************************************'
-	@${ECHO_MSG} '===> NOTE: Use of WITH_OPENGL is not recommended with'
-	@${ECHO_MSG} '===> versions of XFree86 < 4.2.0.'
-	@${ECHO_MSG} '===> **************************************************'
-.endif
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 
 pre-fetch:
 .if exists(${X11BASE}/include/qt2/qapp.h)
@@ -110,8 +106,9 @@ pre-install:
 
 .if exists(${PKGMESSAGE})
 # Display another GL advisory. This one goes in the package, too.
-post-install:
-	@cat ${PKGMESSAGE}
+post-install::
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 .endif
 
 .include <bsd.port.post.mk>
diff --git a/x11-toolkits/qt30/pkg-message b/x11-toolkits/qt30/pkg-message
index b89693f..3d0ea55 100644
--- a/x11-toolkits/qt30/pkg-message
+++ b/x11-toolkits/qt30/pkg-message
@@ -1,4 +1,15 @@
 ===> *****************************************************************
-===> This version of QT has been built with OpenGL graphics support.
+===> WARNING!!!
+===> This version of QT will be/has been built with OpenGL graphics 
+===> support.
 ===> It may not function correctly with versions of XFree86 < 4.2.0.
 ===> *****************************************************************
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt30/pkg-message-upgrade b/x11-toolkits/qt30/pkg-message-upgrade
new file mode 100644
index 0000000..88d9ca6
--- /dev/null
+++ b/x11-toolkits/qt30/pkg-message-upgrade
@@ -0,0 +1,9 @@
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt31/Makefile b/x11-toolkits/qt31/Makefile
index 82afe81..2aee19e 100644
--- a/x11-toolkits/qt31/Makefile
+++ b/x11-toolkits/qt31/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME?=	qt
 PORTVERSION?=	3.0.5
+PORTREVISION?=  1
 CATEGORIES?=	x11-toolkits
 MASTER_SITES=	ftp://ftp.trolltech.com/qt/source/ \
 		ftp://ftp.chg.ru/pub/X11/qt/source/
@@ -33,7 +34,6 @@ USE_GMAKE=	yes
 USE_REINPLACE=	yes
 REINPLACE_ARGS=	-i ""
 USE_X_PREFIX=	yes
-USE_NEWGCC=	yes
 HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	-prefix ${QT_PREFIX} \
 		-shared -qt-gif -system-zlib \
@@ -54,7 +54,7 @@ PLIST_SUB+=	OPENGL=""
 PKGNAMESUFFIX=	-opengl
 BROKEN=	"Using WITH_OPENGL causes DRI to fail in mysterious ways"
 .else
-PKGMESSAGE=${NONEXISTENT}
+PKGMESSAGE=	pkg-message-upgrade
 PLIST_SUB+=	OPENGL="@comment "
 CONFIGURE_ARGS+=-disable-opengl
 .endif
@@ -73,14 +73,10 @@ CFLAGS+=	-O0
 BROKEN=		"The QT 3.x port does not support any XFree86 < 4.x"
 .endif
 
-.if defined(WITH_OPENGL)
-# Display WITH_OPENGL advisory.
+SLEEP=/bin/sleep
 pre-everything:
-	@${ECHO_MSG} '===> **************************************************'
-	@${ECHO_MSG} '===> NOTE: Use of WITH_OPENGL is not recommended with'
-	@${ECHO_MSG} '===> versions of XFree86 < 4.2.0.'
-	@${ECHO_MSG} '===> **************************************************'
-.endif
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 
 pre-fetch:
 .if exists(${X11BASE}/include/qt2/qapp.h)
@@ -110,8 +106,9 @@ pre-install:
 
 .if exists(${PKGMESSAGE})
 # Display another GL advisory. This one goes in the package, too.
-post-install:
-	@cat ${PKGMESSAGE}
+post-install::
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 .endif
 
 .include <bsd.port.post.mk>
diff --git a/x11-toolkits/qt31/pkg-message b/x11-toolkits/qt31/pkg-message
index b89693f..3d0ea55 100644
--- a/x11-toolkits/qt31/pkg-message
+++ b/x11-toolkits/qt31/pkg-message
@@ -1,4 +1,15 @@
 ===> *****************************************************************
-===> This version of QT has been built with OpenGL graphics support.
+===> WARNING!!!
+===> This version of QT will be/has been built with OpenGL graphics 
+===> support.
 ===> It may not function correctly with versions of XFree86 < 4.2.0.
 ===> *****************************************************************
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt31/pkg-message-upgrade b/x11-toolkits/qt31/pkg-message-upgrade
new file mode 100644
index 0000000..88d9ca6
--- /dev/null
+++ b/x11-toolkits/qt31/pkg-message-upgrade
@@ -0,0 +1,9 @@
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt32/Makefile b/x11-toolkits/qt32/Makefile
index 82afe81..2aee19e 100644
--- a/x11-toolkits/qt32/Makefile
+++ b/x11-toolkits/qt32/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME?=	qt
 PORTVERSION?=	3.0.5
+PORTREVISION?=  1
 CATEGORIES?=	x11-toolkits
 MASTER_SITES=	ftp://ftp.trolltech.com/qt/source/ \
 		ftp://ftp.chg.ru/pub/X11/qt/source/
@@ -33,7 +34,6 @@ USE_GMAKE=	yes
 USE_REINPLACE=	yes
 REINPLACE_ARGS=	-i ""
 USE_X_PREFIX=	yes
-USE_NEWGCC=	yes
 HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	-prefix ${QT_PREFIX} \
 		-shared -qt-gif -system-zlib \
@@ -54,7 +54,7 @@ PLIST_SUB+=	OPENGL=""
 PKGNAMESUFFIX=	-opengl
 BROKEN=	"Using WITH_OPENGL causes DRI to fail in mysterious ways"
 .else
-PKGMESSAGE=${NONEXISTENT}
+PKGMESSAGE=	pkg-message-upgrade
 PLIST_SUB+=	OPENGL="@comment "
 CONFIGURE_ARGS+=-disable-opengl
 .endif
@@ -73,14 +73,10 @@ CFLAGS+=	-O0
 BROKEN=		"The QT 3.x port does not support any XFree86 < 4.x"
 .endif
 
-.if defined(WITH_OPENGL)
-# Display WITH_OPENGL advisory.
+SLEEP=/bin/sleep
 pre-everything:
-	@${ECHO_MSG} '===> **************************************************'
-	@${ECHO_MSG} '===> NOTE: Use of WITH_OPENGL is not recommended with'
-	@${ECHO_MSG} '===> versions of XFree86 < 4.2.0.'
-	@${ECHO_MSG} '===> **************************************************'
-.endif
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 
 pre-fetch:
 .if exists(${X11BASE}/include/qt2/qapp.h)
@@ -110,8 +106,9 @@ pre-install:
 
 .if exists(${PKGMESSAGE})
 # Display another GL advisory. This one goes in the package, too.
-post-install:
-	@cat ${PKGMESSAGE}
+post-install::
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 .endif
 
 .include <bsd.port.post.mk>
diff --git a/x11-toolkits/qt32/pkg-message b/x11-toolkits/qt32/pkg-message
index b89693f..3d0ea55 100644
--- a/x11-toolkits/qt32/pkg-message
+++ b/x11-toolkits/qt32/pkg-message
@@ -1,4 +1,15 @@
 ===> *****************************************************************
-===> This version of QT has been built with OpenGL graphics support.
+===> WARNING!!!
+===> This version of QT will be/has been built with OpenGL graphics 
+===> support.
 ===> It may not function correctly with versions of XFree86 < 4.2.0.
 ===> *****************************************************************
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt32/pkg-message-upgrade b/x11-toolkits/qt32/pkg-message-upgrade
new file mode 100644
index 0000000..88d9ca6
--- /dev/null
+++ b/x11-toolkits/qt32/pkg-message-upgrade
@@ -0,0 +1,9 @@
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt33/Makefile b/x11-toolkits/qt33/Makefile
index 82afe81..2aee19e 100644
--- a/x11-toolkits/qt33/Makefile
+++ b/x11-toolkits/qt33/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME?=	qt
 PORTVERSION?=	3.0.5
+PORTREVISION?=  1
 CATEGORIES?=	x11-toolkits
 MASTER_SITES=	ftp://ftp.trolltech.com/qt/source/ \
 		ftp://ftp.chg.ru/pub/X11/qt/source/
@@ -33,7 +34,6 @@ USE_GMAKE=	yes
 USE_REINPLACE=	yes
 REINPLACE_ARGS=	-i ""
 USE_X_PREFIX=	yes
-USE_NEWGCC=	yes
 HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	-prefix ${QT_PREFIX} \
 		-shared -qt-gif -system-zlib \
@@ -54,7 +54,7 @@ PLIST_SUB+=	OPENGL=""
 PKGNAMESUFFIX=	-opengl
 BROKEN=	"Using WITH_OPENGL causes DRI to fail in mysterious ways"
 .else
-PKGMESSAGE=${NONEXISTENT}
+PKGMESSAGE=	pkg-message-upgrade
 PLIST_SUB+=	OPENGL="@comment "
 CONFIGURE_ARGS+=-disable-opengl
 .endif
@@ -73,14 +73,10 @@ CFLAGS+=	-O0
 BROKEN=		"The QT 3.x port does not support any XFree86 < 4.x"
 .endif
 
-.if defined(WITH_OPENGL)
-# Display WITH_OPENGL advisory.
+SLEEP=/bin/sleep
 pre-everything:
-	@${ECHO_MSG} '===> **************************************************'
-	@${ECHO_MSG} '===> NOTE: Use of WITH_OPENGL is not recommended with'
-	@${ECHO_MSG} '===> versions of XFree86 < 4.2.0.'
-	@${ECHO_MSG} '===> **************************************************'
-.endif
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 
 pre-fetch:
 .if exists(${X11BASE}/include/qt2/qapp.h)
@@ -110,8 +106,9 @@ pre-install:
 
 .if exists(${PKGMESSAGE})
 # Display another GL advisory. This one goes in the package, too.
-post-install:
-	@cat ${PKGMESSAGE}
+post-install::
+	@${CAT} ${PKGMESSAGE}
+	@${SLEEP} 10
 .endif
 
 .include <bsd.port.post.mk>
diff --git a/x11-toolkits/qt33/pkg-message b/x11-toolkits/qt33/pkg-message
index b89693f..3d0ea55 100644
--- a/x11-toolkits/qt33/pkg-message
+++ b/x11-toolkits/qt33/pkg-message
@@ -1,4 +1,15 @@
 ===> *****************************************************************
-===> This version of QT has been built with OpenGL graphics support.
+===> WARNING!!!
+===> This version of QT will be/has been built with OpenGL graphics 
+===> support.
 ===> It may not function correctly with versions of XFree86 < 4.2.0.
 ===> *****************************************************************
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+
diff --git a/x11-toolkits/qt33/pkg-message-upgrade b/x11-toolkits/qt33/pkg-message-upgrade
new file mode 100644
index 0000000..88d9ca6
--- /dev/null
+++ b/x11-toolkits/qt33/pkg-message-upgrade
@@ -0,0 +1,9 @@
+
+===> *****************************************************************
+===> WARNING!!!
+===> If you are upgrading from Qt version 3.0 - 3.0.4, you MUST
+===> rebuild and reinstall kdelibs after installing the new Qt version, 
+===> at the least, and all of KDE (starting with kdelibs, then kdebase) 
+===> to be sure of correct function.
+===> *****************************************************************
+