o) Fix a bug concerning the creation of /var/db/bacula and chmod

   in pkg-install in pre-install phase (wrong order).
o) Add/delete lines for file, storage and director ports in /etc/services
o) Add bacula patches concerning EOM handling, choosing the next volume, and
   calculating weekofmonth

5 files changed, 387 insertions, 10 deletions

diff --git a/sysutils/bacula/Makefile b/sysutils/bacula/Makefile
index 8c0265b..97e5e44 100644
--- a/sysutils/bacula/Makefile
+++ b/sysutils/bacula/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	bacula
 PORTVERSION=	1.32f
-#PORTREVISION=	1
+PORTREVISION=	1
 CATEGORIES=	sysutils
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE}
 MASTER_SITE_SUBDIR=	bacula
@@ -81,17 +81,18 @@ pre-everything::
 post-patch:
 	@${REINPLACE_CMD} -e 's|-pthread|${PTHREAD_CFLAGS}|g' ${WRKSRC}/configure
 
-pre-install:
-.if !defined(WITH_CLIENT_ONLY)
-	@ ${SETENV} PKG_PREFIX=${PREFIX} \
-		${SH} ${PKGINSTALL} ${PORTNAME} PRE-INSTALL
-.endif
-
 post-install:
 .if defined(WITH_CLIENT_ONLY)
+	# Extend only /etc/services
+	@ ${SETENV} PKG_PREFIX=${PREFIX} \
+		${SH} ${PKGINSTALL} ${PORTNAME}
 	# don't know how to make it better
 	${RM} -f ${PREFIX}/etc/rc.d/bacula.sh.sample
 .else
+	# Extend /etc/services and install UID/GID
+	@ ${SETENV} PKG_PREFIX=${PREFIX} \
+		${SH} ${PKGINSTALL} ${PORTNAME} POST-INSTALL
+	# Install config files and preserve existing ones
 	${INSTALL_SCRIPT} ${FILESDIR}/chio-bacula ${PREFIX}/sbin
 	if [ -f ${PREFIX}/etc/bacula-barcodes ]; then \
 		${INSTALL_DATA} ${FILESDIR}/bacula-barcodes ${PREFIX}/etc/bacula-barcodes.new ; \
diff --git a/sysutils/bacula/files/patch-eom-nextvol b/sysutils/bacula/files/patch-eom-nextvol
new file mode 100644
index 0000000..85b6c00
--- /dev/null
+++ b/sysutils/bacula/files/patch-eom-nextvol
@@ -0,0 +1,278 @@
+
+This patch fixes two bugs.
+1. Reported by Phil: where when the end of a Volume was reached, 
+   Bacula went into a loop requesting the next Volume then gave up.
+2. Reported by Lars: the order of the next Volume selected by Bacula
+   was not as expected.
+       
+Apply the patch with:
+
+  cd <bacula-source>
+  patch -p0 <1.32f-2-eom-nextvol.patch
+  make
+  ...
+
+Index: ReleaseNotes
+===================================================================
+RCS file: /cvsroot/bacula/bacula/ReleaseNotes,v
+retrieving revision 1.52.2.9.2.7
+retrieving revision 1.52.2.9.2.8
+diff -u -b -r1.52.2.9.2.7 -r1.52.2.9.2.8
+--- ReleaseNotes	31 Dec 2003 09:10:55 -0000	1.52.2.9.2.7
++++ ReleaseNotes	5 Jan 2004 16:49:44 -0000	1.52.2.9.2.8
+@@ -1,7 +1,14 @@
+ 
+-          Release Notes for Bacula 1.32f
++          Release Notes for Bacula 1.32g
+ 
+   Bacula code: Total files = 262 Total lines = 80,318 (*.h *.c *.in)
++
++Changes since 1.32f
++- Fix bug reported by Phil (could not duplicate here) where at the end
++  of a Volume, Bacula wanted a new Volume and got into a loop requesting
++  it, then gave up.
++- Modify selection of next Volume to select most currently appended Volume,
++  or if none oldest recycled Volume (problem reported by Lars).
+ 
+ Changes since 1.32e:
+ - Note, this change affects only the Win32 FD.
+Index: src/cats/sql_find.c
+===================================================================
+RCS file: /cvsroot/bacula/bacula/src/cats/sql_find.c,v
+retrieving revision 1.23.2.7.2.1
+retrieving revision 1.23.2.7.2.2
+diff -u -b -r1.23.2.7.2.1 -r1.23.2.7.2.2
+--- src/cats/sql_find.c	7 Dec 2003 15:01:42 -0000	1.23.2.7.2.1
++++ src/cats/sql_find.c	5 Jan 2004 16:49:45 -0000	1.23.2.7.2.2
+@@ -7,7 +7,7 @@
+  * 
+  *    Kern Sibbald, December 2000
+  *
+- *    Version $Id: sql_find.c,v 1.23.2.7.2.1 2003/12/07 15:01:42 kerns Exp $
++ *    Version $Id: sql_find.c,v 1.23.2.7.2.2 2004/01/05 16:49:45 kerns Exp $
+  */
+ 
+ /*
+@@ -218,6 +218,7 @@
+ {
+    SQL_ROW row;
+    int numrows;
++   char *order;
+ 
+    db_lock(mdb);
+    if (item == -1) {	   /* find oldest volume */
+@@ -232,12 +233,19 @@
+      item = 1;
+    } else {
+       /* Find next available volume */
++      if (strcmp(mr->VolStatus, "Recycled") == 0 ||
++          strcmp(mr->VolStatus, "Purged") == 0) {
++         order = "ORDER BY LastWritten ASC,MediaId";  /* take oldest */
++      } else {
++         order = "ORDER BY LastWritten DESC,MediaId";   /* take most recently written */
++      }  
+       Mmsg(&mdb->cmd, "SELECT MediaId,VolumeName,VolJobs,VolFiles,VolBlocks,"
+-"VolBytes,VolMounts,VolErrors,VolWrites,MaxVolBytes,VolCapacityBytes,"
+-"VolRetention,VolUseDuration,MaxVolJobs,MaxVolFiles,Recycle,Slot,"
+-"FirstWritten,LastWritten,VolStatus "
+-"FROM Media WHERE PoolId=%u AND MediaType='%s' AND VolStatus='%s' "
+-"ORDER BY LastWritten,MediaId", mr->PoolId, mr->MediaType, mr->VolStatus); 
++          "VolBytes,VolMounts,VolErrors,VolWrites,MaxVolBytes,VolCapacityBytes,"
++          "VolRetention,VolUseDuration,MaxVolJobs,MaxVolFiles,Recycle,Slot,"
++          "FirstWritten,LastWritten,VolStatus "
++          "FROM Media WHERE PoolId=%u AND MediaType='%s' AND VolStatus='%s' "
++          "%s LIMIT 1",
++	  mr->PoolId, mr->MediaType, mr->VolStatus, order);
+    }
+    if (!QUERY_DB(jcr, mdb, mdb->cmd)) {
+       db_unlock(mdb);
+Index: src/stored/mount.c
+===================================================================
+RCS file: /cvsroot/bacula/bacula/src/stored/mount.c,v
+retrieving revision 1.42.2.9.2.3
+retrieving revision 1.42.2.9.2.4
+diff -u -b -r1.42.2.9.2.3 -r1.42.2.9.2.4
+--- src/stored/mount.c	8 Dec 2003 20:53:47 -0000	1.42.2.9.2.3
++++ src/stored/mount.c	5 Jan 2004 16:49:45 -0000	1.42.2.9.2.4
+@@ -5,7 +5,7 @@
+  *
+  *   Kern Sibbald, August MMII
+  *			      
+- *   Version $Id: mount.c,v 1.42.2.9.2.3 2003/12/08 20:53:47 kerns Exp $
++ *   Version $Id: mount.c,v 1.42.2.9.2.4 2004/01/05 16:49:45 kerns Exp $
+  */
+ /*
+    Copyright (C) 2000-2003 Kern Sibbald and John Walker
+@@ -30,7 +30,8 @@
+ #include "bacula.h"                   /* pull in global headers */
+ #include "stored.h"                   /* pull in Storage Deamon headers */
+ 
+-/* Forward referenced functions */
++/* Forward referenced routines */
++static void mark_volume_in_error(JCR *jcr, DEVICE *dev);
+ 
+ 
+ /*
+@@ -47,11 +48,17 @@
+  */
+ int mount_next_write_volume(JCR *jcr, DEVICE *dev, DEV_BLOCK *block, int release)
+ {
+-   int retry = 0, autochanger;
+-   bool ask, recycle;
++   int retry = 0;
++   bool ask = false, recycle, autochanger;
++   int vol_label_status;
+ 
+    Dmsg0(100, "Enter mount_next_volume()\n");
+ 
++   /* 
++    * Attempt to mount the next volume. If something non-fatal goes
++    *  wrong, we come back here to re-try (new op messages, re-read
++    *  Volume, ...)
++    */
+ mount_next_vol:
+    if (retry++ > 5) {
+       Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"), 
+@@ -62,8 +69,8 @@
+       Jmsg(jcr, M_FATAL, 0, _("Job %d canceled.\n"), jcr->JobId);
+       return 0;
+    }
+-   autochanger = 0;
+-   recycle = ask = false;
++   autochanger = false; 	       /* Assume no autochanger */
++   recycle = false;
+    if (release) {
+       Dmsg0(100, "mount_next_volume release=1\n");
+       release_volume(jcr, dev);
+@@ -97,15 +104,10 @@
+     * It assumes that the device is not already in use!
+     *
+     */
+-
+-
+    dev->state &= ~(ST_APPEND|ST_READ|ST_EOT|ST_WEOT|ST_EOF);
+ 
+-   for ( ;; ) {
+-      int vol_label_status;
+       autochanger = autoload_device(jcr, dev, 1, NULL);
+       Dmsg1(100, "autoload_dev returns %d\n", autochanger);
+-
+       /*
+        * If we autochanged to correct Volume or (we have not just
+        *   released the Volume AND we can automount) we go ahead 
+@@ -116,7 +118,7 @@
+          ask = false;                 /* don't ask SYSOP this time */
+       }
+       Dmsg2(100, "Ask=%d autochanger=%d\n", ask, autochanger);
+-      release = 1;                    /* release next time if we "recurse" */
++   release = true;                /* release next time if we "recurse" */
+ 
+       if (ask && !dir_ask_sysop_to_mount_next_volume(jcr, dev)) {
+          Dmsg0(100, "Error return ask_sysop ...\n");
+@@ -181,14 +183,15 @@
+ 	 /* Check if this is a valid Volume in the pool */
+ 	 pm_strcpy(&jcr->VolumeName, dev->VolHdr.VolName);			   
+ 	 if (!dir_get_volume_info(jcr, GET_VOL_INFO_FOR_WRITE)) {
+-            Mmsg(&jcr->errmsg, _("Director wanted Volume \"%s\".\n"
++         Jmsg(jcr, M_WARNING, 0, _("Director wanted Volume \"%s\".\n"
+                  "    Current Volume \"%s\" not acceptable because:\n"
+                  "    %s"),
+ 		VolCatInfo.VolCatName, dev->VolHdr.VolName,
+ 		jcr->dir_bsock->msg);
+ 	    /* Restore desired volume name, note device info out of sync */
+ 	    memcpy(&jcr->VolCatInfo, &VolCatInfo, sizeof(jcr->VolCatInfo));
+-	    goto mount_error;
++	 ask = true;
++	 goto mount_next_vol;
+ 	 }
+          Dmsg1(100, "want new name=%s\n", jcr->VolumeName);
+ 	 memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(dev->VolCatInfo));
+@@ -230,15 +233,11 @@
+ 	 /* NOTE! Fall-through wanted. */
+       case VOL_NO_MEDIA:
+       default:
+-mount_error:
+ 	 /* Send error message */
+          Jmsg(jcr, M_WARNING, 0, "%s", jcr->errmsg);                         
+ 	 ask = true;
+-	 /* was - goto ask_again; */	     
+ 	 goto mount_next_vol;
+       }
+-      break;
+-   }
+ 
+    /* 
+     * See if we have a fresh tape or a tape with data.
+@@ -322,6 +321,10 @@
+          Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume \"%s\" on device %s\n"),
+ 	    jcr->VolumeName, dev_name(dev));
+       }
++      /*
++       * End writing real Volume label (from pre-labeled tape), or recycling
++       *  the volume.
++       */
+ 
+    } else {
+       /*
+@@ -335,11 +338,7 @@
+       if (!eod_dev(dev)) {
+          Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data %s. ERR=%s\n"),
+ 	    dev_name(dev), strerror_dev(dev));
+-         Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
+-	    jcr->VolumeName);
+-         bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
+-         Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+-	 dir_update_volume_info(jcr, dev, 0);
++	 mark_volume_in_error(jcr, dev);
+ 	 goto mount_next_vol;
+       }
+       /* *****FIXME**** we should do some checking for files too */
+@@ -355,9 +354,7 @@
+             Jmsg(jcr, M_ERROR, 0, _("I canot write on this volume because:\n\
+ The number of files mismatch! Volume=%u Catalog=%u\n"), 
+ 		 dev_file(dev), dev->VolCatInfo.VolCatFiles);
+-            bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
+-            Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+-	    dir_update_volume_info(jcr, dev, 0);
++	    mark_volume_in_error(jcr, dev);
+ 	    goto mount_next_vol;
+ 	 }
+       }
+@@ -372,7 +369,19 @@
+    return 1; 
+ }
+ 
++static void mark_volume_in_error(JCR *jcr, DEVICE *dev)
++{
++   Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
++	jcr->VolumeName);
++   bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
++   Dmsg0(100, "dir_update_vol_info. Set Error.\n");
++   dir_update_volume_info(jcr, dev, 0);
++}
+ 
++/* 
++ * If we are reading, we come here at the end of the tape
++ *  and see if there are more volumes to be mounted.
++ */
+ int mount_next_read_volume(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
+ {
+    Dmsg2(90, "NumVolumes=%d CurVolume=%d\n", jcr->NumVolumes, jcr->CurVolume);
+@@ -399,7 +408,6 @@
+  */
+ void release_volume(JCR *jcr, DEVICE *dev)
+ {
+-
+    if (jcr->WroteVol) {
+       Jmsg0(jcr, M_ERROR, 0, "Hey!!!!! WroteVol non-zero !!!!!\n");
+    }
+@@ -411,7 +419,8 @@
+    memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
+    memset(&jcr->VolCatInfo, 0, sizeof(jcr->VolCatInfo));
+    memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
+-   dev->state &= ~ST_LABEL;	   /* label not yet read */
++   /* Force re-read of label */
++   dev->state &= ~(ST_LABEL|ST_READ|ST_APPEND);
+    jcr->VolumeName[0] = 0;
+ 
+    if ((dev->state & ST_OPENED) && 
diff --git a/sysutils/bacula/files/patch-weekofmonth b/sysutils/bacula/files/patch-weekofmonth
new file mode 100644
index 0000000..e9cfe66
--- /dev/null
+++ b/sysutils/bacula/files/patch-weekofmonth
@@ -0,0 +1,62 @@
+
+This patch fixes an incorrect calculation of the week
+of the month reported by Volker Sauer.  It should work on either
+1.32e or 1.32f.
+       
+Apply the patch with:
+
+  cd <bacula-source>
+  patch -p0 <1.32f-weekofmonth.patch
+  make
+  ...
+
+Index: src/dird/scheduler.c
+===================================================================
+RCS file: /cvsroot/bacula/bacula/src/dird/scheduler.c,v
+retrieving revision 1.13.6.1
+diff -u -b -r1.13.6.1 scheduler.c
+--- src/dird/scheduler.c	21 Dec 2003 15:17:42 -0000	1.13.6.1
++++ src/dird/scheduler.c	6 Jan 2004 09:43:31 -0000
+@@ -205,7 +205,7 @@
+    mday = tm.tm_mday - 1;
+    wday = tm.tm_wday;
+    month = tm.tm_mon;
+-   wom = tm_wom(tm.tm_mday, tm.tm_wday);  /* get week of month */
++   wom = mday / 7;
+    woy = tm_woy(now);			  /* get week of year */
+ 
+    /* Loop through all jobs */
+@@ -237,7 +237,7 @@
+ 	    if (bit_is_set(next_hour, run->hour)) {
+ 	       tm.tm_hour++;
+ 	       if (tm.tm_hour > 23) {
+-		  tm.tm_hour = 0;
++		  continue;	      /* next day */
+ 	       }
+ 	       runtime = mktime(&tm);
+ 	       add_job(job, run, now, runtime);
+Index: src/dird/ua_output.c
+===================================================================
+RCS file: /cvsroot/bacula/bacula/src/dird/ua_output.c,v
+retrieving revision 1.25.2.11.2.3
+diff -u -b -r1.25.2.11.2.3 ua_output.c
+--- src/dird/ua_output.c	21 Dec 2003 15:17:42 -0000	1.25.2.11.2.3
++++ src/dird/ua_output.c	6 Jan 2004 09:43:32 -0000
+@@ -454,7 +454,7 @@
+    mday = tm.tm_mday - 1;
+    wday = tm.tm_wday;
+    month = tm.tm_mon;
+-   wom = tm_wom(tm.tm_mday, tm.tm_wday);
++   wom = mday / 7;
+    woy = tm_woy(now);
+ 
+    /* Break down tomorrow into components */
+@@ -463,7 +463,7 @@
+    tmday = tm.tm_mday - 1;
+    twday = tm.tm_wday;
+    tmonth = tm.tm_mon;
+-   twom  = tm_wom(tm.tm_mday, tm.tm_wday);
++   twom  = tmday / 7;
+    twoy  = tm_woy(tomorrow);
+ 
+    if (run == NULL) {
diff --git a/sysutils/bacula/pkg-deinstall b/sysutils/bacula/pkg-deinstall
new file mode 100644
index 0000000..2818921
--- /dev/null
+++ b/sysutils/bacula/pkg-deinstall
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+PATH=/bin:/usr/bin:/usr/sbin
+TMPFILE=/tmp/services-$RANDOM-$$
+if [ -z "${BACULA_DIR}" ]; then
+	BACULA_DIR=/var/db/bacula
+fi
+
+case "$2" in
+"DEINSTALL")
+	# Delete entries in /etc/services
+        sed -e '/# Bacula port start/,/# Bacule port end/{' \
+            -e 'd' \
+            -e '}' /etc/services > $TMPFILE
+        mv -f $TMPFILE /etc/services
+
+	# Note how to delete UID/GID
+	USER=bacula
+	GROUP=${USER}
+	if pw usershow "${USER}" 2>/dev/null 1>&2; then
+	    echo "To delete Bacula user  permanently, use 'pw userdel  ${USER}'"
+	    echo "To delete Bacula group permanently, use 'pw groupdel ${GROUP}'"
+	    echo "Check if ${BACULA_DIR} is empty and delete it to permanently remove the port"
+	fi
+        ;;
+esac
diff --git a/sysutils/bacula/pkg-install b/sysutils/bacula/pkg-install
index 5dccbf6c..460b57f 100644
--- a/sysutils/bacula/pkg-install
+++ b/sysutils/bacula/pkg-install
@@ -1,12 +1,23 @@
 #!/bin/sh
 
-PATH=/bin:/usr/sbin
+PATH=/bin:/usr/bin:/usr/sbin
 if [ -z "${BACULA_DIR}" ]; then
 	BACULA_DIR=/var/db/bacula
 fi
 
+# Always add lines in /etc/services
+grep -q "bacula-dir" /etc/services
+if [ "$?" != "0" ]; then
+    echo "# Bacula port start
+bacula-dir      9101/tcp   #Bacula director daemon
+bacula-fd       9102/tcp   #Bacula file daemon
+bacula-sd       9103/tcp   #Bacula storage daemon
+# Bacule port end" >> /etc/services
+fi
+
 case $2 in
-PRE-INSTALL)
+POST-INSTALL)
+	# Install UID/GID
 	USER=bacula
 	GROUP=${USER}
 	UID=910
@@ -42,7 +53,6 @@ PRE-INSTALL)
 			exit 1
 		fi
 	fi
-
 	chown -R ${USER}:${GROUP} ${BACULA_DIR}
 	;;
 esac