Port update after repository copy

Taken from tasic@planka.carrier.kiev.ua
+ some modifications by me
(style, patch additions to compile cleanly, pkg/*)
added convert utility to port/package to enable people
to do migrations, if needed, see the docu for details.

PR:		13716
Submitted by:	tasic@planka.carrier.kiev.ua

10 files changed, 143 insertions, 150 deletions

diff --git a/net/tac_plus4/Makefile b/net/tac_plus4/Makefile
index f45c06e..20b2c6b 100644
--- a/net/tac_plus4/Makefile
+++ b/net/tac_plus4/Makefile
@@ -6,16 +6,16 @@
 # $FreeBSD$
 #
 
-DISTNAME=	tac_plus.2.1
-PKGNAME=	tac_plus-2.1
+DISTNAME=	tac_plus.F4.0.3.alpha
+PKGNAME=	tac_plus-F4.0.3
 CATEGORIES=	net
-MASTER_SITES=	http://www.FreeBSD.ORG/~andreas/download/
+MASTER_SITES=	ftp://ftp-eng.cisco.com/pub/tacacs/
+EXTRACT_SUFX=	.tar.Z
 
-MAINTAINER=     andreas@FreeBSD.org
+MAINTAINER=	tasic@lucky.net
 
-USE_BZIP2=	yes
 ALL_TARGET=	tac_plus
-MAN8=		tac_plus.8
+MAN1=		tac_plus.1
 EXTRA_PATCH=	patch-ba
 
 # To change the text displayed when users are prompted to enter
@@ -27,19 +27,23 @@ pre-patch:
 
 do-install:
 	${INSTALL_PROGRAM} ${WRKSRC}/tac_plus ${PREFIX}/sbin
-	${INSTALL_MAN} ${WRKSRC}/tac_plus.1 ${PREFIX}/man/man8/tac_plus.8
+	${INSTALL_MAN} ${WRKSRC}/tac_plus.1 ${PREFIX}/man/man1/tac_plus.1
 	${INSTALL_DATA} ${FILESDIR}/tac_plus.conf.example ${PREFIX}/etc/
 	@if [ ! -f ${PREFIX}/etc/rc.d/tac_plus.sh ]; then \
 		${ECHO} "Installing ${PREFIX}/etc/rc.d/tac_plus.sh startup file."; \
 		${ECHO} "#!/bin/sh" > ${PREFIX}/etc/rc.d/tac_plus.sh; \
-		${ECHO} "[ -x ${PREFIX}/sbin/tac_plus -a -f ${PREFIX}/etc/tac_plus.conf ] && ${PREFIX}/sbin/tac_plus -C ${PREFIX}/etc/tac_plus.conf && ${ECHO} -n ' tac_plus'" >> ${PREFIX}/etc/rc.d/tac_plus.sh; \
-		${CHMOD} 751 ${PREFIX}/etc/rc.d/tac_plus.sh; \
+		${ECHO} "[ -x ${PREFIX}/sbin/tac_plus -a -f ${PREFIX}/etc/tac_plus.conf ] && ${PREFIX}/sbin/tac_plus -C ${PREFIX}/etc/tac_plus.conf && echo -n ' tac_plus'" >> ${PREFIX}/etc/rc.d/tac_plus.sh; \
+		chmod 751 ${PREFIX}/etc/rc.d/tac_plus.sh; \
 	fi
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${PREFIX}/share/doc/tac_plus
 	${INSTALL_DATA} ${WRKSRC}/users_guide ${PREFIX}/share/doc/tac_plus
+	${INSTALL_SCRIPT} ${WRKSRC}/convert.pl ${PREFIX}/share/doc/tac_plus
 .endif
 
+post-install:
+	strip ${PREFIX}/sbin/tac_plus
+
 pre-clean:
 	@${RM} -f ${PATCHDIR}/${EXTRA_PATCH}
 
diff --git a/net/tac_plus4/distinfo b/net/tac_plus4/distinfo
index d760826..d6daf2e 100644
--- a/net/tac_plus4/distinfo
+++ b/net/tac_plus4/distinfo
@@ -1 +1 @@
-MD5 (tac_plus.2.1.tar.bz2) = 32b086d7d5b71eb097c317a38fe5d84b
+MD5 (tac_plus.F4.0.3.alpha.tar.Z) = 451d92503b5832a848c1b76ce58a4636
diff --git a/net/tac_plus4/files/extra-patch-ba b/net/tac_plus4/files/extra-patch-ba
index 9cb5ff3..58d401a 100644
--- a/net/tac_plus4/files/extra-patch-ba
+++ b/net/tac_plus4/files/extra-patch-ba
@@ -1,7 +1,7 @@
-*** authen.c.orig	Sat Jul 29 02:49:15 1995
---- authen.c	Wed Jul 16 15:00:40 1997
+*** authen.c.orig	Thu Sep  9 15:21:09 1999
+--- authen.c	Thu Sep  9 15:21:28 1999
 ***************
-*** 209,217 ****
+*** 227,235 ****
   
   	    datap->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (datap->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
@@ -11,7 +11,7 @@
   	    }
   	    send_authen_reply(TAC_PLUS_AUTHEN_STATUS_GETUSER, /* status */
   			      prompt, /* msg */
---- 209,217 ----
+--- 227,235 ----
   
   	    datap->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (datap->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
@@ -21,10 +21,10 @@
   	    }
   	    send_authen_reply(TAC_PLUS_AUTHEN_STATUS_GETUSER, /* status */
   			      prompt, /* msg */
-*** default_fn.c.orig	Sat Jul 29 02:49:18 1995
---- default_fn.c	Wed Jul 16 15:00:52 1997
+*** default_v0_fn.c.orig	Thu Sep  9 15:22:52 1999
+--- default_v0_fn.c	Thu Sep  9 15:23:09 1999
 ***************
-*** 76,84 ****
+*** 87,95 ****
   	    /* No username. Try requesting one */
   	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
@@ -34,7 +34,7 @@
   	    }
   	    data->server_msg = tac_strdup(prompt);
   	    p->state = STATE_AUTHEN_GETUSER;
---- 76,84 ----
+--- 87,95 ----
   	    /* No username. Try requesting one */
   	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
@@ -44,10 +44,10 @@
   	    }
   	    data->server_msg = tac_strdup(prompt);
   	    p->state = STATE_AUTHEN_GETUSER;
-*** skey_fn.c.orig	Wed Jul 16 14:38:34 1997
---- skey_fn.c	Wed Jul 16 15:01:01 1997
+*** skey_fn.c.orig	Thu Sep  9 15:23:23 1999
+--- skey_fn.c	Thu Sep  9 15:23:56 1999
 ***************
-*** 104,112 ****
+*** 116,124 ****
   	    /* No username. Try requesting one */
   	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
@@ -57,7 +57,7 @@
   	    }
   	    data->server_msg = tac_strdup(prompt);
   	    p->state = STATE_AUTHEN_GETUSER;
---- 104,112 ----
+--- 116,124 ----
   	    /* No username. Try requesting one */
   	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
   	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
diff --git a/net/tac_plus4/files/patch-aa b/net/tac_plus4/files/patch-aa
index 3171aee..0ab3ea3 100644
--- a/net/tac_plus4/files/patch-aa
+++ b/net/tac_plus4/files/patch-aa
@@ -1,18 +1,24 @@
---- Makefile.orig	Sat Jul 29 00:49:20 1995
-+++ Makefile	Thu Oct 14 22:12:44 1999
-@@ -22,9 +22,9 @@
- # OSLIBS=-lsocket -lnsl
+--- Makefile.orig	Sat Apr  3 08:03:48 1999
++++ Makefile	Tue Nov  9 21:48:01 1999
+@@ -31,13 +31,13 @@
+ # OS=-DMIPS
+ 
+ # For Solaris (SUNOS 5.3, 5.4, 5.5, 5.6) uncomment the following two lines
+-OS=-DSOLARIS
+-OSLIBS=-lsocket -lnsl
++# OS=-DSOLARIS
++# OSLIBS=-lsocket -lnsl
  
  # For FreeBSD
 -# OS=-DFREEBSD
 +OS=-DFREEBSD
- # You may also need to add
+ # You may also need to add:
 -# OSLIBS=-lcrypt
 +OSLIBS=-lcrypt
- 
- # For LINUX
- # OS=-DLINUX
-@@ -40,23 +40,23 @@
+ # NOTE: If you want your password encryption to be compatible with
+ # e.g. SunOS, you may need to instead use:
+ # OSLIBS=-ldescrypt
+@@ -62,12 +62,12 @@
  # FLAGS   = -DTAC_PLUS_USERID=$(USERID) -DTAC_PLUS_GROUPID=$(GROUPID)
  
  # Definitions for SKEY functionality
@@ -22,10 +28,13 @@
 +LIBS = -lskey -lmd
  # INCLUDES = -I../crimelab/skey/src
  
+ # Debugging flags
 -DEBUG = -g
-+#DEBUG = -g
++# DEBUG = -g
  
- # On startup, tac_plus creates the file /etc/tac_plus.pid (if
+ # Enforce a limit on maximum sessions per user. See the user's guide
+ # for more information.
+@@ -83,13 +83,13 @@
  # possible), containing its process id. Uncomment and modify the
  # following line to change this filename
  
@@ -36,8 +45,19 @@
  # End of customisable section of Makefile
  #
  
--CFLAGS = $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE)
-+CFLAGS += $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE)
+-CFLAGS = $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE) $(MAXSESS)
++CFLAGS += $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE) $(MAXSESS)
+ 
+ HFILES = expire.h parse.h regmagic.h md5.h regexp.h tac_plus.h 
+ 
+@@ -128,8 +128,8 @@
+ 	-rm -f *.o *~ *.BAK tac_plus generate_passwd
+ 
+ install:
+-	cp tac_plus /usr/local/bin
+-	cp tac_plus.1 /usr/man/manl/tac_plus.1
++	cp tac_plus $(PREFIX)/sbin
++	cp tac_plus.1 $(PREFIX)/man1/tac_plus.1
  
- SRCS =	acct.c authen.c author.c choose_authen.c config.c do_acct.c \
- 	do_author.c dump.c encrypt.c expire.c md5.c \
+ depend:
+ 	makedepend $(CFLAGS) $(SRCS)
diff --git a/net/tac_plus4/files/patch-ac b/net/tac_plus4/files/patch-ac
index bed281b..444a0a6 100644
--- a/net/tac_plus4/files/patch-ac
+++ b/net/tac_plus4/files/patch-ac
@@ -1,107 +1,49 @@
-*** tac_plus.1.orig	Sat Jul 29 02:49:20 1995
---- tac_plus.1	Mon Mar  3 17:34:30 1997
-***************
-*** 30,36 ****
-  authorisation and accounting.
-  .LP
-  On startup, tac_plus creates the file
-! .B /etc/tac_plus.pid ,
-  if possible, containing its process id.
-  .LP
-  .SH ARGUMENTS and OPTIONS
---- 30,36 ----
-  authorisation and accounting.
-  .LP
-  On startup, tac_plus creates the file
-! .B /var/run/tac_plus.pid ,
-  if possible, containing its process id.
-  .LP
-  .SH ARGUMENTS and OPTIONS
-***************
-*** 79,91 ****
-  .B \-d <level>
-  Switch on debugging and write debug output into
-  .B
-! /tmp/var/tac_plus.log. 
-  
-  See the definitions of debugging flags at the bottom of tac_plus.h for
-  available flags and their meanings.  Most flags cause extra messages
-  to be sent to 
-  .B
-! /tmp/var/tac_plus.log 
-  and also to 
-  .B
-  syslog.
---- 79,91 ----
-  .B \-d <level>
-  Switch on debugging and write debug output into
-  .B
-! /var/tmp/tac_plus.log. 
-  
-  See the definitions of debugging flags at the bottom of tac_plus.h for
-  available flags and their meanings.  Most flags cause extra messages
-  to be sent to 
-  .B
-! /var/tmp/tac_plus.log 
-  and also to 
-  .B
-  syslog.
-***************
-*** 177,183 ****
-  facility.
-  .nf
-  
-! local6.info					/var/adm/messages
-  
-  .fi
-  .LP
---- 177,183 ----
-  facility.
-  .nf
-  
-! local6.info					/var/log/tac_plus.log
-  
-  .fi
-  .LP
-***************
-*** 194,200 ****
-  .B /var/tmp/tac_plus.log
-  Contains debugging output when -d is in effect.
-  .TP
-! .B /etc/tac_plus.pid 
-  contains the process id of currently running daemon.
-  .SH BUGS
-  The configuration file syntax is too complex.
---- 194,200 ----
-  .B /var/tmp/tac_plus.log
-  Contains debugging output when -d is in effect.
-  .TP
-! .B /var/run/tac_plus.pid 
-  contains the process id of currently running daemon.
-  .SH BUGS
-  The configuration file syntax is too complex.
-*** users_guide.orig	Sat Jul 29 02:49:20 1995
---- users_guide	Mon Mar  3 19:51:56 1997
-***************
-*** 996,1005 ****
-  and then send the daemon a SIGUSR1. This will cause it to reinitialize
-  itself and re-read the configuration file.
-  
-! On startup, tac_plus creates the file /etc/tac_plus.pid , if possible,
-  containing its process id, so something like the following should work:
-  
-! # kill -USR1 `cat /etc/tac_plus.pid`
-  
-  It's a good idea to check that the daemon is still running after
-  sending it a SIGUSR1, since a syntactically incorrect configuration
---- 996,1005 ----
-  and then send the daemon a SIGUSR1. This will cause it to reinitialize
-  itself and re-read the configuration file.
-  
-! On startup, tac_plus creates the file /var/run/tac_plus.pid, if possible,
-  containing its process id, so something like the following should work:
-  
-! # kill -USR1 `cat /var/run/tac_plus.pid`
-  
-  It's a good idea to check that the daemon is still running after
-  sending it a SIGUSR1, since a syntactically incorrect configuration
+--- tac_plus.1.orig	Sat Apr  3 08:03:47 1999
++++ tac_plus.1	Tue Nov  9 21:55:56 1999
+@@ -32,7 +32,7 @@
+ authorisation and accounting.
+ .LP
+ On startup, tac_plus creates the file
+-.B /etc/tac_plus.pid ,
++.B /var/run/tac_plus.pid ,
+ if possible, containing its process id.
+ .LP
+ .SH ARGUMENTS and OPTIONS
+@@ -195,7 +195,7 @@
+ facility.
+ .nf
+ 
+-local6.info					/var/adm/messages
++local6.info					/var/log/tac_plus.log
+ 
+ .fi
+ .LP
+@@ -212,7 +212,7 @@
+ .B /var/tmp/tac_plus.log
+ Contains debugging output when -d is in effect.
+ .TP
+-.B /etc/tac_plus.pid  or /etc/tac_plus.pid.port
++.B /var/run/tac_plus.pid  or /var/run/tac_plus.pid.port
+ contains the process id of the currently running daemon.  The port
+ number is appended to the filename only if the port being used is not
+ the default one of 49.
+--- users_guide.orig	Sat Apr  3 08:03:48 1999
++++ users_guide	Tue Nov  9 21:57:03 1999
+@@ -1368,7 +1368,7 @@
+ and then send the daemon a SIGUSR1. This will cause it to reinitialize
+ itself and re-read the configuration file.
+ 
+-On startup, tac_plus creates the file /etc/tac_plus.pid , if possible,
++On startup, tac_plus creates the file /var/run/tac_plus.pid , if possible,
+ containing its process id. If you invoke the daemon so that it listens
+ on a non-standard port, the file created is /etc/tac_plus.pid.<port>
+ instead, where <port> is the port number the daemon is listening on.
+@@ -1376,7 +1376,7 @@
+ Assuming you are listening on the default port 49, something like the
+ following should work:
+ 
+-# kill -USR1 `cat /etc/tac_plus.pid`
++# kill -USR1 `cat /var/run/tac_plus.pid`
+ 
+ It's a good idea to check that the daemon is still running after
+ sending it a SIGUSR1, since a syntactically incorrect configuration
diff --git a/net/tac_plus4/files/patch-ae b/net/tac_plus4/files/patch-ae
new file mode 100644
index 0000000..d4b6b71
--- /dev/null
+++ b/net/tac_plus4/files/patch-ae
@@ -0,0 +1,11 @@
+--- do_acct.c.orig	Tue Nov  9 22:02:51 1999
++++ do_acct.c	Tue Nov  9 22:03:30 1999
+@@ -158,7 +158,7 @@
+ #endif
+     entry.ut_time = utime;
+ 
+-    wtmpfd = open(wtmpfile, O_CREAT | O_WRONLY | O_APPEND | O_SYNC, 0666);	
++    wtmpfd = open(wtmpfile, O_CREAT | O_WRONLY | O_APPEND, 0666);	
+     if (wtmpfd < 0) {
+ 	report(LOG_ERR, "Can't open wtmp file %s -- %s",
+ 	       wtmpfile, sys_errlist[errno]);
diff --git a/net/tac_plus4/files/tac_plus.conf.example b/net/tac_plus4/files/tac_plus.conf.example
index 0d7b273..06a5d5b 100644
--- a/net/tac_plus4/files/tac_plus.conf.example
+++ b/net/tac_plus4/files/tac_plus.conf.example
@@ -1,5 +1,9 @@
 # /usr/local/etc/tac_plus.conf
 
+    # This is example from old version of tac_plus. It will work
+    # but config file have new features. I recomend to read
+    # /usr/local/share/doc/tac_plus/users_guide
+
 user=fred {
     name = "Fred Flintstone"
     login = des mEX027bHtzTlQ
diff --git a/net/tac_plus4/pkg-comment b/net/tac_plus4/pkg-comment
index 0913e34..433e105 100644
--- a/net/tac_plus4/pkg-comment
+++ b/net/tac_plus4/pkg-comment
@@ -1 +1 @@
-A remote authentication/authorization/accounting server
+The Cisco remote authentication/authorization/accounting server.
diff --git a/net/tac_plus4/pkg-descr b/net/tac_plus4/pkg-descr
index 9d288f3..7f5e0b7 100644
--- a/net/tac_plus4/pkg-descr
+++ b/net/tac_plus4/pkg-descr
@@ -1,5 +1,16 @@
-tacacs+ services network requests for authentication
-and authorization, verifies identities, grants or denies
-authorizations, and logs accounting records. 
+tacacs+ s program that allow authorization and authentication via net on
+remote access servers. Authnticate users, authorize commands and log 
+accounting information.
 
-WWW: http://www.cisco.com/warp/public/146/187.html
+This new version 4 has improved features and bugfixes over the older 2.x
+version, which is still available, since this source is still marked ALPHA.
+
+Improved features among others and bugfixes: Microsoft CHAP support.
+To enable MSCHAP you need to optain a key from Microsoft, see the FAQ
+section in the users guide. Therefore this isn't enabled by default.
+
+Details are described at:
+http://www.cisco.com/warp/public/146/187.html
+
+-- Taras
+tasic@lucky.net
diff --git a/net/tac_plus4/pkg-plist b/net/tac_plus4/pkg-plist
index 8bc819e..9193e7a 100644
--- a/net/tac_plus4/pkg-plist
+++ b/net/tac_plus4/pkg-plist
@@ -1,5 +1,6 @@
-sbin/tac_plus
 etc/rc.d/tac_plus.sh
 etc/tac_plus.conf.example
+sbin/tac_plus
 share/doc/tac_plus/users_guide
+share/doc/tac_plus/convert.pl
 @dirrm share/doc/tac_plus