HEADS UP: After this commit, snmpd is not enabled by default.

          See pkg-message for details.

* Use /etc/rc.conf variables to control snmpd invocation.
* Add some make variables to set default values.

Requested by:	many people :-)

12 files changed, 180 insertions, 27 deletions

diff --git a/net-mgmt/net-snmp-devel/Makefile b/net-mgmt/net-snmp-devel/Makefile
index 3591319..a44dec5 100644
--- a/net-mgmt/net-snmp-devel/Makefile
+++ b/net-mgmt/net-snmp-devel/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	net-snmp
 PORTVERSION=	5.0.3
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	net ipv6
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE} \
 		ftp://sunsite.cnlab-switch.ch/mirror/ucd-snmp/ \
@@ -23,6 +23,11 @@ LIBTOOLFLAGS=	--disable-ltlibs --release-ignore
 NO_LATEST_LINK=	yes
 
 CONFIGURE_ARGS+= --enable-shared --with-mib-modules="host ucd-snmp/diskio" \
+		 --with-default-snmp-version="${DEFAULT_SNMP_VERSION}" \
+		 --with-sys-contact="${NET_SNMP_SYS_CONTACT}" \
+		 --with-sys-location="${NET_SNMP_SYS_LOCATION}" \
+		 --with-logfile="${NET_SNMP_LOGFILE}" \
+		 --with-persistent-directory="${NET_SNMP_PERSISTENTDIR}" \
 		 --with-gnu-ld --with-libwrap --with-libs="-lkvm -ldevstat"
 .if defined(BATCH)
 CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
@@ -30,6 +35,12 @@ CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
 IS_INTERACTIVE= yes
 .endif
 
+DEFAULT_SNMP_VERSION?=	3
+NET_SNMP_SYS_CONTACT?=	nobody@no.where
+NET_SNMP_SYS_LOCATION?=	
+NET_SNMP_LOGFILE?=	/var/log/snmpd.log
+NET_SNMP_PERSISTENTDIR?=/var/net-snmp
+
 MAN1=		mib2c.1 \
 		snmpbulkget.1 snmpbulkwalk.1 snmpcmd.1 snmpconf.1 snmpd.1 \
 		snmpdelta.1 snmpdf.1 snmpget.1 snmpgetnext.1 snmpinform.1 \
@@ -81,15 +92,17 @@ PLIST_SUB+=	shlib=${SHLIB_VERSION}
 post-patch:
 	@${PERL} -pi -e "s|%%LOCALBASE%%|${LOCALBASE}|g" ${WRKSRC}/aclocal.m4
 
+pre-install:
+	-@[ -f ${STARTUP_FILE} ] && \
+	 (echo "Remove old ${STARTUP_FILE} before install." && exit 1)
+
 post-install:
 	@( cd ${PREFIX}/bin && ${STRIP_CMD} ${BIN} )
 	@( cd ${PREFIX}/sbin && ${STRIP_CMD} ${SBIN} )
 	@${FIND} ${PREFIX}/include/net-snmp ${PREFIX}/share/snmp/mibs -type f \
 		| ${XARGS} ${CHMOD} 644
-	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${PREFIX}/etc/rc.d
-	@if [ ! -f ${STARTUP_FILE} ]; then \
-		${ECHO} "Creating ${PREFIX}/etc/rc.d/snmpd.sh startup file."; \
-		${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}; \
-	 fi
+	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}
+	@${ECHO_MSG}
+	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.post.mk>
diff --git a/net-mgmt/net-snmp-devel/files/snmpd.sh.sample b/net-mgmt/net-snmp-devel/files/snmpd.sh.sample
index 71f8b50..a626c9b 100644
--- a/net-mgmt/net-snmp-devel/files/snmpd.sh.sample
+++ b/net-mgmt/net-snmp-devel/files/snmpd.sh.sample
@@ -1,13 +1,29 @@
 #!/bin/sh
+#
+# $FreeBSD$
 
 if ! PREFIX=$(expr $0 : "\(/.*\)/etc/rc\.d/$(basename $0)\$"); then
     echo "$0: Cannot determine the PREFIX" >&2
     exit 1
 fi
 
+if [ -z "${source_rc_confs_defined}" ]; then
+	if [ -r /etc/defaults/rc.conf ]; then
+		. /etc/defaults/rc.conf
+		source_rc_confs
+	elif [ -r /etc/rc.conf ]; then
+		. /etc/rc.conf
+	fi
+fi
+
 case "$1" in
 start)
-	[ -x ${PREFIX}/sbin/snmpd ] && ${PREFIX}/sbin/snmpd && echo -n ' snmpd'
+	case "${net_snmpd_enable}" in
+	    [Yy][Ee][Ss])
+	    echo -n ' snmpd'
+	    ${net_snmpd_program:-${PREFIX}/sbin/snmpd} ${net_snmpd_flags}
+	    ;;
+	esac
 	;;
 stop)
 	killall snmpd && echo -n ' snmpd'
diff --git a/net-mgmt/net-snmp-devel/pkg-message b/net-mgmt/net-snmp-devel/pkg-message
new file mode 100644
index 0000000..c33cc3a
--- /dev/null
+++ b/net-mgmt/net-snmp-devel/pkg-message
@@ -0,0 +1,23 @@
+**** This port installs snmp daemon, include files and libraries but not
+     invoking snmpd by default.
+     If you want to invoke snmpd from startup, put these lines into
+     /etc/rc.conf.
+
+	net_snmpd_enable="YES"
+	net_snmpd_flags=""
+
+**** You can specify make variables as:
+
+	NET_SNMP_SYS_CONTACT="kuriyama@FreeBSD.org"
+	NET_SNMP_SYS_LOCATION="Tokyo, Japan"
+	DEFAULT_SNMP_VERSION=3
+	NET_SNMP_LOGFILE=/var/log/snmpd.log
+	NET_SNMP_PERSISTENTDIR=/var/net-snmp
+
+     to define default values (or overwriting defaults).  At least
+     setting first two variables, you will not be prompted during
+     configuration process.  Or you can set
+
+	BATCH="yes"
+
+     to make to avoid interactive configuration.
\ No newline at end of file
diff --git a/net-mgmt/net-snmp-devel/pkg-plist b/net-mgmt/net-snmp-devel/pkg-plist
index 3c575e0..8c7ef94 100644
--- a/net-mgmt/net-snmp-devel/pkg-plist
+++ b/net-mgmt/net-snmp-devel/pkg-plist
@@ -23,8 +23,7 @@ bin/snmpusm
 bin/snmpvacm
 bin/snmpwalk
 bin/traptoemail
-@unexec if cmp -s %D/etc/snmpd.sh %D/etc/snmpd.sh.sample; then rm -f %D/etc/snmpd.sh; fi
-etc/rc.d/snmpd.sh.sample
+etc/rc.d/snmpd.sh
 include/net-snmp/agent/agent_callbacks.h
 include/net-snmp/agent/agent_handler.h
 include/net-snmp/agent/agent_index.h
diff --git a/net-mgmt/net-snmp/Makefile b/net-mgmt/net-snmp/Makefile
index 3591319..a44dec5 100644
--- a/net-mgmt/net-snmp/Makefile
+++ b/net-mgmt/net-snmp/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	net-snmp
 PORTVERSION=	5.0.3
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	net ipv6
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE} \
 		ftp://sunsite.cnlab-switch.ch/mirror/ucd-snmp/ \
@@ -23,6 +23,11 @@ LIBTOOLFLAGS=	--disable-ltlibs --release-ignore
 NO_LATEST_LINK=	yes
 
 CONFIGURE_ARGS+= --enable-shared --with-mib-modules="host ucd-snmp/diskio" \
+		 --with-default-snmp-version="${DEFAULT_SNMP_VERSION}" \
+		 --with-sys-contact="${NET_SNMP_SYS_CONTACT}" \
+		 --with-sys-location="${NET_SNMP_SYS_LOCATION}" \
+		 --with-logfile="${NET_SNMP_LOGFILE}" \
+		 --with-persistent-directory="${NET_SNMP_PERSISTENTDIR}" \
 		 --with-gnu-ld --with-libwrap --with-libs="-lkvm -ldevstat"
 .if defined(BATCH)
 CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
@@ -30,6 +35,12 @@ CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
 IS_INTERACTIVE= yes
 .endif
 
+DEFAULT_SNMP_VERSION?=	3
+NET_SNMP_SYS_CONTACT?=	nobody@no.where
+NET_SNMP_SYS_LOCATION?=	
+NET_SNMP_LOGFILE?=	/var/log/snmpd.log
+NET_SNMP_PERSISTENTDIR?=/var/net-snmp
+
 MAN1=		mib2c.1 \
 		snmpbulkget.1 snmpbulkwalk.1 snmpcmd.1 snmpconf.1 snmpd.1 \
 		snmpdelta.1 snmpdf.1 snmpget.1 snmpgetnext.1 snmpinform.1 \
@@ -81,15 +92,17 @@ PLIST_SUB+=	shlib=${SHLIB_VERSION}
 post-patch:
 	@${PERL} -pi -e "s|%%LOCALBASE%%|${LOCALBASE}|g" ${WRKSRC}/aclocal.m4
 
+pre-install:
+	-@[ -f ${STARTUP_FILE} ] && \
+	 (echo "Remove old ${STARTUP_FILE} before install." && exit 1)
+
 post-install:
 	@( cd ${PREFIX}/bin && ${STRIP_CMD} ${BIN} )
 	@( cd ${PREFIX}/sbin && ${STRIP_CMD} ${SBIN} )
 	@${FIND} ${PREFIX}/include/net-snmp ${PREFIX}/share/snmp/mibs -type f \
 		| ${XARGS} ${CHMOD} 644
-	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${PREFIX}/etc/rc.d
-	@if [ ! -f ${STARTUP_FILE} ]; then \
-		${ECHO} "Creating ${PREFIX}/etc/rc.d/snmpd.sh startup file."; \
-		${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}; \
-	 fi
+	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}
+	@${ECHO_MSG}
+	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.post.mk>
diff --git a/net-mgmt/net-snmp/files/snmpd.sh.sample b/net-mgmt/net-snmp/files/snmpd.sh.sample
index 71f8b50..a626c9b 100644
--- a/net-mgmt/net-snmp/files/snmpd.sh.sample
+++ b/net-mgmt/net-snmp/files/snmpd.sh.sample
@@ -1,13 +1,29 @@
 #!/bin/sh
+#
+# $FreeBSD$
 
 if ! PREFIX=$(expr $0 : "\(/.*\)/etc/rc\.d/$(basename $0)\$"); then
     echo "$0: Cannot determine the PREFIX" >&2
     exit 1
 fi
 
+if [ -z "${source_rc_confs_defined}" ]; then
+	if [ -r /etc/defaults/rc.conf ]; then
+		. /etc/defaults/rc.conf
+		source_rc_confs
+	elif [ -r /etc/rc.conf ]; then
+		. /etc/rc.conf
+	fi
+fi
+
 case "$1" in
 start)
-	[ -x ${PREFIX}/sbin/snmpd ] && ${PREFIX}/sbin/snmpd && echo -n ' snmpd'
+	case "${net_snmpd_enable}" in
+	    [Yy][Ee][Ss])
+	    echo -n ' snmpd'
+	    ${net_snmpd_program:-${PREFIX}/sbin/snmpd} ${net_snmpd_flags}
+	    ;;
+	esac
 	;;
 stop)
 	killall snmpd && echo -n ' snmpd'
diff --git a/net-mgmt/net-snmp/pkg-message b/net-mgmt/net-snmp/pkg-message
new file mode 100644
index 0000000..c33cc3a
--- /dev/null
+++ b/net-mgmt/net-snmp/pkg-message
@@ -0,0 +1,23 @@
+**** This port installs snmp daemon, include files and libraries but not
+     invoking snmpd by default.
+     If you want to invoke snmpd from startup, put these lines into
+     /etc/rc.conf.
+
+	net_snmpd_enable="YES"
+	net_snmpd_flags=""
+
+**** You can specify make variables as:
+
+	NET_SNMP_SYS_CONTACT="kuriyama@FreeBSD.org"
+	NET_SNMP_SYS_LOCATION="Tokyo, Japan"
+	DEFAULT_SNMP_VERSION=3
+	NET_SNMP_LOGFILE=/var/log/snmpd.log
+	NET_SNMP_PERSISTENTDIR=/var/net-snmp
+
+     to define default values (or overwriting defaults).  At least
+     setting first two variables, you will not be prompted during
+     configuration process.  Or you can set
+
+	BATCH="yes"
+
+     to make to avoid interactive configuration.
\ No newline at end of file
diff --git a/net-mgmt/net-snmp/pkg-plist b/net-mgmt/net-snmp/pkg-plist
index 3c575e0..8c7ef94 100644
--- a/net-mgmt/net-snmp/pkg-plist
+++ b/net-mgmt/net-snmp/pkg-plist
@@ -23,8 +23,7 @@ bin/snmpusm
 bin/snmpvacm
 bin/snmpwalk
 bin/traptoemail
-@unexec if cmp -s %D/etc/snmpd.sh %D/etc/snmpd.sh.sample; then rm -f %D/etc/snmpd.sh; fi
-etc/rc.d/snmpd.sh.sample
+etc/rc.d/snmpd.sh
 include/net-snmp/agent/agent_callbacks.h
 include/net-snmp/agent/agent_handler.h
 include/net-snmp/agent/agent_index.h
diff --git a/net-mgmt/net-snmp53/Makefile b/net-mgmt/net-snmp53/Makefile
index 3591319..a44dec5 100644
--- a/net-mgmt/net-snmp53/Makefile
+++ b/net-mgmt/net-snmp53/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	net-snmp
 PORTVERSION=	5.0.3
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	net ipv6
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE} \
 		ftp://sunsite.cnlab-switch.ch/mirror/ucd-snmp/ \
@@ -23,6 +23,11 @@ LIBTOOLFLAGS=	--disable-ltlibs --release-ignore
 NO_LATEST_LINK=	yes
 
 CONFIGURE_ARGS+= --enable-shared --with-mib-modules="host ucd-snmp/diskio" \
+		 --with-default-snmp-version="${DEFAULT_SNMP_VERSION}" \
+		 --with-sys-contact="${NET_SNMP_SYS_CONTACT}" \
+		 --with-sys-location="${NET_SNMP_SYS_LOCATION}" \
+		 --with-logfile="${NET_SNMP_LOGFILE}" \
+		 --with-persistent-directory="${NET_SNMP_PERSISTENTDIR}" \
 		 --with-gnu-ld --with-libwrap --with-libs="-lkvm -ldevstat"
 .if defined(BATCH)
 CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
@@ -30,6 +35,12 @@ CONFIGURE_ARGS+= --with-defaults --with-sys-contact=nobody@no.where
 IS_INTERACTIVE= yes
 .endif
 
+DEFAULT_SNMP_VERSION?=	3
+NET_SNMP_SYS_CONTACT?=	nobody@no.where
+NET_SNMP_SYS_LOCATION?=	
+NET_SNMP_LOGFILE?=	/var/log/snmpd.log
+NET_SNMP_PERSISTENTDIR?=/var/net-snmp
+
 MAN1=		mib2c.1 \
 		snmpbulkget.1 snmpbulkwalk.1 snmpcmd.1 snmpconf.1 snmpd.1 \
 		snmpdelta.1 snmpdf.1 snmpget.1 snmpgetnext.1 snmpinform.1 \
@@ -81,15 +92,17 @@ PLIST_SUB+=	shlib=${SHLIB_VERSION}
 post-patch:
 	@${PERL} -pi -e "s|%%LOCALBASE%%|${LOCALBASE}|g" ${WRKSRC}/aclocal.m4
 
+pre-install:
+	-@[ -f ${STARTUP_FILE} ] && \
+	 (echo "Remove old ${STARTUP_FILE} before install." && exit 1)
+
 post-install:
 	@( cd ${PREFIX}/bin && ${STRIP_CMD} ${BIN} )
 	@( cd ${PREFIX}/sbin && ${STRIP_CMD} ${SBIN} )
 	@${FIND} ${PREFIX}/include/net-snmp ${PREFIX}/share/snmp/mibs -type f \
 		| ${XARGS} ${CHMOD} 644
-	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${PREFIX}/etc/rc.d
-	@if [ ! -f ${STARTUP_FILE} ]; then \
-		${ECHO} "Creating ${PREFIX}/etc/rc.d/snmpd.sh startup file."; \
-		${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}; \
-	 fi
+	@${INSTALL_SCRIPT} -m 751 ${FILESDIR}/snmpd.sh.sample ${STARTUP_FILE}
+	@${ECHO_MSG}
+	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.post.mk>
diff --git a/net-mgmt/net-snmp53/files/snmpd.sh.sample b/net-mgmt/net-snmp53/files/snmpd.sh.sample
index 71f8b50..a626c9b 100644
--- a/net-mgmt/net-snmp53/files/snmpd.sh.sample
+++ b/net-mgmt/net-snmp53/files/snmpd.sh.sample
@@ -1,13 +1,29 @@
 #!/bin/sh
+#
+# $FreeBSD$
 
 if ! PREFIX=$(expr $0 : "\(/.*\)/etc/rc\.d/$(basename $0)\$"); then
     echo "$0: Cannot determine the PREFIX" >&2
     exit 1
 fi
 
+if [ -z "${source_rc_confs_defined}" ]; then
+	if [ -r /etc/defaults/rc.conf ]; then
+		. /etc/defaults/rc.conf
+		source_rc_confs
+	elif [ -r /etc/rc.conf ]; then
+		. /etc/rc.conf
+	fi
+fi
+
 case "$1" in
 start)
-	[ -x ${PREFIX}/sbin/snmpd ] && ${PREFIX}/sbin/snmpd && echo -n ' snmpd'
+	case "${net_snmpd_enable}" in
+	    [Yy][Ee][Ss])
+	    echo -n ' snmpd'
+	    ${net_snmpd_program:-${PREFIX}/sbin/snmpd} ${net_snmpd_flags}
+	    ;;
+	esac
 	;;
 stop)
 	killall snmpd && echo -n ' snmpd'
diff --git a/net-mgmt/net-snmp53/pkg-message b/net-mgmt/net-snmp53/pkg-message
new file mode 100644
index 0000000..c33cc3a
--- /dev/null
+++ b/net-mgmt/net-snmp53/pkg-message
@@ -0,0 +1,23 @@
+**** This port installs snmp daemon, include files and libraries but not
+     invoking snmpd by default.
+     If you want to invoke snmpd from startup, put these lines into
+     /etc/rc.conf.
+
+	net_snmpd_enable="YES"
+	net_snmpd_flags=""
+
+**** You can specify make variables as:
+
+	NET_SNMP_SYS_CONTACT="kuriyama@FreeBSD.org"
+	NET_SNMP_SYS_LOCATION="Tokyo, Japan"
+	DEFAULT_SNMP_VERSION=3
+	NET_SNMP_LOGFILE=/var/log/snmpd.log
+	NET_SNMP_PERSISTENTDIR=/var/net-snmp
+
+     to define default values (or overwriting defaults).  At least
+     setting first two variables, you will not be prompted during
+     configuration process.  Or you can set
+
+	BATCH="yes"
+
+     to make to avoid interactive configuration.
\ No newline at end of file
diff --git a/net-mgmt/net-snmp53/pkg-plist b/net-mgmt/net-snmp53/pkg-plist
index 3c575e0..8c7ef94 100644
--- a/net-mgmt/net-snmp53/pkg-plist
+++ b/net-mgmt/net-snmp53/pkg-plist
@@ -23,8 +23,7 @@ bin/snmpusm
 bin/snmpvacm
 bin/snmpwalk
 bin/traptoemail
-@unexec if cmp -s %D/etc/snmpd.sh %D/etc/snmpd.sh.sample; then rm -f %D/etc/snmpd.sh; fi
-etc/rc.d/snmpd.sh.sample
+etc/rc.d/snmpd.sh
 include/net-snmp/agent/agent_callbacks.h
 include/net-snmp/agent/agent_handler.h
 include/net-snmp/agent/agent_index.h