heyu is used to control X10 CM11A devices

PR:		15738
Submitted by:	Paul M. Lambert <plambert@plambert.net>

6 files changed, 86 insertions, 0 deletions

diff --git a/misc/heyu/Makefile b/misc/heyu/Makefile
new file mode 100644
index 0000000..3e17f93
--- /dev/null
+++ b/misc/heyu/Makefile
@@ -0,0 +1,35 @@
+# New ports collection makefile for:	heyu
+# Version required:	1.28f
+# Date created:		27 December 1999
+# Whom:			plambert@plambert.net
+#
+# $FreeBSD$
+#
+
+DISTNAME=	x10_heyu
+PKGNAME=	heyu-1.28f
+CATEGORIES=	misc
+MASTER_SITES=	http://www.prado.com/~dbs/
+EXTRACT_SUFX=	.tgz
+
+MAINTAINER=	plambert@plambert.net
+
+ALL_TARGET=	heyu
+WRKSRC=		${WRKDIR}/heyu.dir
+
+MAN1=		heyu.1
+MAN5=		x10config.5 \
+		x10sched.5
+
+do-configure:
+	${PERL} -pi.orig -e 's|/usr/local|${PREFIX}|' ${WRKSRC}/Makefile
+
+post-install:
+	strip ${PREFIX}/bin/heyu
+.if !defined(NOPORTDOCS)
+	${MKDIR} ${PREFIX}/share/examples/heyu
+	${INSTALL_DATA} ${WRKSRC}/x10config ${PREFIX}/share/examples/heyu
+	${INSTALL_DATA} ${WRKSRC}/x10sched.conf.sample ${PREFIX}/share/examples/heyu
+.endif
+
+.include <bsd.port.mk>
diff --git a/misc/heyu/distinfo b/misc/heyu/distinfo
new file mode 100644
index 0000000..c09e7a3
--- /dev/null
+++ b/misc/heyu/distinfo
@@ -0,0 +1 @@
+MD5 (x10_heyu.tgz) = f41c73b9665242ce5b9aba2b9a4f92e8
diff --git a/misc/heyu/files/patch-aa b/misc/heyu/files/patch-aa
new file mode 100644
index 0000000..a924c13
--- /dev/null
+++ b/misc/heyu/files/patch-aa
@@ -0,0 +1,34 @@
+--- Makefile.orig	Tue Jan  4 23:10:44 2000
++++ Makefile	Tue Jan  4 23:12:54 2000
+@@ -3,7 +3,7 @@
+ BIN = /usr/local/bin
+ MAN = /usr/local/man/man1
+ MAN5 = /usr/local/man/man5
+-GROUP = sys
++GROUP = wheel
+ OWNER = bin
+ 
+ 
+@@ -13,19 +13,19 @@
+ #	   -DVOID	if compiler doesn't understand 'void'
+ #	   -DMINIEXCH	if using the DEC mini-exchange
+ 
+-CFLAGS = -O $(DFLAGS) -Wall
++#CFLAGS = -O $(DFLAGS) -Wall
+ #LDFLAGS = -z -i
+ #LIBS = -lm -lc_s		# uncomment if using shared libraries
+ LIBS = -lm -lc
+ 
+ ##  For LINUX, use the following defines in addition to what's above
+-DFLAGS = -DSYSV -DPOSIX -DHAS_ITIMER -DLINUX -DHASSELECT
++#DFLAGS = -DSYSV -DPOSIX -DHAS_ITIMER -DLINUX -DHASSELECT
+ 
+ ##  For solaris, use the following defines in addition to what's above
+ # DFLAGS = -DSYSV -DPOSIX -DSOLARIS -DLOCKDIR=\"/var/spool/locks\" -DHASSELECT
+ 
+ ## if you're using freebsd, just set the flag for select.
+-# DFLAGS= -DHASSELECT
++DFLAGS= -DHASSELECT -DLOCKDIR=\"/var/tmp\"
+ 
+ ## If you aren't sure, try this
+ #DFLAGS = -DSYSV -DPOSIX 
diff --git a/misc/heyu/pkg-comment b/misc/heyu/pkg-comment
new file mode 100644
index 0000000..2bf207d
--- /dev/null
+++ b/misc/heyu/pkg-comment
@@ -0,0 +1 @@
+Control a CM11A interface from the command line
diff --git a/misc/heyu/pkg-descr b/misc/heyu/pkg-descr
new file mode 100644
index 0000000..6b5c3c8
--- /dev/null
+++ b/misc/heyu/pkg-descr
@@ -0,0 +1,12 @@
+The CM11A is a device built by the X10 company for controlling
+devices by sending signals through the power lines. It's a small
+box that plugs into an AC outlet and connects to a serial port.
+The CM11A is shipped with Windows software.  Heyu will control your
+X10 devices, set the cm11a interface clock and monitor x10 signals
+on the AC power lines. It will upload macros and timers to your
+CM11A for stand-alone execution.
+
+WWW: http://www.prado.com/~dbs/
+
+- plambert
+plambert@plambert.net
diff --git a/misc/heyu/pkg-plist b/misc/heyu/pkg-plist
new file mode 100644
index 0000000..e24c578
--- /dev/null
+++ b/misc/heyu/pkg-plist
@@ -0,0 +1,3 @@
+bin/heyu
+share/examples/heyu/x10config
+share/examples/heyu/x10sched.conf.sample