Update to 0.4.0

PR:		ports/75449
Submitted by:	maintainer

5 files changed, 11 insertions, 203 deletions

diff --git a/misc/ezload/Makefile b/misc/ezload/Makefile
index 9803e2e..f3806c9 100644
--- a/misc/ezload/Makefile
+++ b/misc/ezload/Makefile
@@ -6,12 +6,12 @@
 #
 
 PORTNAME=	ezload
-PORTVERSION=	0.3.1
+PORTVERSION=	0.4.0
 CATEGORIES=	misc
-MASTER_SITES=	http://www.etla.net/~n_hibma/usb/
+MASTER_SITES=	http://proj.bpsw.biz/ezload/downloads/
 
 MAINTAINER=	mcampos@bpsw.biz
-COMMENT=	Down-/uploader for AnchorChip's EZ-USB chip
+COMMENT=	Firmware down/uploader for Cypress' EZ-USB chip
 
 MAN1=		ezupload.1 ezdownload.1 aw.1
 MANCOMPRESSED=	yes
@@ -20,8 +20,8 @@ MAKE_ENV=	BINDIR="${PREFIX}/bin" MANDIR="${PREFIX}/man/man" MKDIR="${MKDIR}" INS
 
 .include <bsd.port.pre.mk>
 
-.if ${OSVERSION} < 400012
-IGNORE=		'This port only works on 4.00012'
+.if ${OSVERSION} < 460000
+IGNORE=		'This port only works on FreeBSD 4.6.0+'
 .endif
 
 .include <bsd.port.post.mk>
diff --git a/misc/ezload/distinfo b/misc/ezload/distinfo
index f367d07..3ff6c83 100644
--- a/misc/ezload/distinfo
+++ b/misc/ezload/distinfo
@@ -1,2 +1,2 @@
-MD5 (ezload-0.3.1.tar.gz) = f88178d5f9e8dc157353cd33e0d8dac4
-SIZE (ezload-0.3.1.tar.gz) = 19082
+MD5 (ezload-0.4.0.tar.gz) = 35d36dcb3ab45062f892c340a25ddefc
+SIZE (ezload-0.4.0.tar.gz) = 23375
diff --git a/misc/ezload/files/patch-aa b/misc/ezload/files/patch-aa
deleted file mode 100644
index 76e509e..0000000
--- a/misc/ezload/files/patch-aa
+++ /dev/null
@@ -1,190 +0,0 @@
---- ezupload/ezupload.c.orig	Thu Oct 10 14:33:34 2002
-+++ ezupload/ezupload.c	Thu Oct 10 14:34:49 2002
-@@ -179,15 +179,15 @@
- 			l = en-at;
- 
- #ifdef BSD
--		ur.request.bmRequestType= 0xC0;		/* see Anchor TRM v1.6 page 64 */
--		ur.request.bRequest 	= 0xA0; 	/* Anchor Down/Upload */
-+		ur.ucr_request.bmRequestType= 0xC0;		/* see Anchor TRM v1.6 page 64 */
-+		ur.ucr_request.bRequest 	= 0xA0; 	/* Anchor Down/Upload */
- 
--		USETW(ur.request.wValue,at);		/* Starting Address */
--		USETW(ur.request.wIndex,0);		/* unused */
--		USETW(ur.request.wLength,l);		/* payload len in bytes */
-+		USETW(ur.ucr_request.wValue,at);		/* Starting Address */
-+		USETW(ur.ucr_request.wIndex,0);		/* unused */
-+		USETW(ur.ucr_request.wLength,l);		/* payload len in bytes */
- 	
--		ur.flags = 0;
--		ur.actlen = 0;
-+		ur.ucr_flags = 0;
-+		ur.ucr_actlen = 0;
- #else
-                 ur.requesttype= 0xC0;           /* see Anchor TRM v1.6 page 64 */
-                 ur.request      = 0xA0;         /* Anchor Down/Upload */
-@@ -195,7 +195,7 @@
-                 ur.index = 0;           /* unused */
-                 ur.length = l;          /* payload len in bytes */
- #endif
--		ur.data	= (void *)d;
-+		ur.ucr_data	= (void *)d;
- 
- #ifdef BSD
-         	if(ioctl(fd, USB_DO_REQUEST,&ur)) {
-@@ -207,7 +207,7 @@
- 			break;
- 		}
- #ifdef BSD
--		if (ur.actlen != l) {
-+		if (ur.ucr_actlen != l) {
- 			fprintf(stderr,"Failed to get full %d chunk at adr %X: %s\nAborted\n",
- 				l,at,strerror(errno));
- 			break;
---- ezdownload/ezdownload.c.orig	Thu Oct 10 14:36:01 2002
-+++ ezdownload/ezdownload.c	Thu Oct 10 14:51:28 2002
-@@ -268,13 +268,13 @@
- 	int err;
- 
- #ifdef BSD
--	ur.request.bmRequestType= 0x40;		/* see TRM v1.6 page 64 */
--	ur.request.bRequest = 0xA0;		/* Anchor Download */
--	USETW(ur.request.wValue, at);		/* Starting Address */
--	USETW(ur.request.wIndex, 0);		/* unused */
--	USETW(ur.request.wLength, len);		/* payload len in bytes */
--	ur.flags = 0;
--	ur.actlen = 0;
-+	ur.ucr_request.bmRequestType= 0x40;		/* see TRM v1.6 page 64 */
-+	ur.ucr_request.bRequest = 0xA0;		/* Anchor Download */
-+	USETW(ur.ucr_request.wValue, at);		/* Starting Address */
-+	USETW(ur.ucr_request.wIndex, 0);		/* unused */
-+	USETW(ur.ucr_request.wLength, len);		/* payload len in bytes */
-+	ur.ucr_flags = 0;
-+	ur.ucr_actlen = 0;
- #else
- 	ur.requesttype= 0x40;           /* see TRM v1.6 page 64 */
- 	ur.request = 0xA0;              /* Anchor Download */
-@@ -282,7 +282,7 @@
- 	ur.index = 0;                   /* unused */
- 	ur.length = len;                /* payload len in bytes */
- #endif
--	ur.data	= (void *) d;
-+	ur.ucr_data	= (void *) d;
- 
- 	/* Although USB does not limit you here, the Anchor docs
-    	 * quote 64 as a limit, and Mato@activewireinc.com suggested
-@@ -304,7 +304,7 @@
- 		return err;
- 
- #ifdef BSD
--	if (ur.actlen != len)
-+	if (ur.ucr_actlen != len)
- 		return EAGAIN;			/* or too obscure ? */
- #endif
- 
-@@ -386,16 +386,29 @@
- 	};
- #define	SURE(x) (((x!=NULL) && (*x !='\0')) ? x : "<not defined>")
- 	if (verbose)
-+#ifdef BSD
-+		printf("Device information: vendor %04x (%s) product %04x (%s) rev 0x%04x addr %x\n",
-+			udi.udi_vendorNo, SURE(udi.udi_vendor), 
-+			udi.udi_productNo, SURE(udi.udi_product),
-+			udi.udi_releaseNo, udi.udi_addr);
-+#else
- 		printf("Device information: vendor %04x (%s) product %04x (%s) rev 0x%04x addr %x\n",
- 			udi.vendorNo, SURE(udi.vendor), 
- 			udi.productNo, SURE(udi.product),
- 			udi.releaseNo, udi.addr);
-+#endif
- 
- 	/* standard setup for AnchorChips ISAIK
- 	 */
-+#ifdef BSD
-+        ai.uai_config_index         = 0;
-+        ai.uai_interface_index      = 0;
-+        ai.uai_alt_no               = 0;
-+#else
-         ai.config_index         = 0;
-         ai.interface_index      = 0;
-         ai.alt_no               = 0;
-+#endif
- 
-         if ( ioctl(fd, USB_SET_ALTINTERFACE, &ai) == -1 ) {
-                 fprintf(stderr, "ioctl 1 returned: %s\n",
-@@ -425,8 +438,13 @@
- 			/* XXX  is the revision # really hardware specific ? Is it a string
- 			 *	or a BCD number ? 
- 			 */
-+#ifdef BSD
-+			snprintf(tmp,sizeof(tmp),"%s/%04x.%04x.%04x.hex",
-+				dir,udi.udi_vendorNo,udi.udi_productNo,udi.udi_releaseNo);
-+#else
- 			snprintf(tmp,sizeof(tmp),"%s/%04x.%04x.%04x.hex",
- 				dir,udi.vendorNo,udi.productNo,udi.releaseNo);
-+#endif
- 
- 			/* we could just do a loop through the directory
- 			 * and slack compare ?
-@@ -439,9 +457,15 @@
- 				printf("No %s\n",tmp);
- 		};
- 		if (!hexfile) {
-+#ifdef BSD
-+			fprintf(stderr,"No hexfile with firmware for "
-+				"%04x.%04x.%04x available.\n",
-+				udi.udi_vendorNo,udi.udi_productNo,udi.udi_releaseNo);
-+#else
- 			fprintf(stderr,"No hexfile with firmware for "
- 				"%04x.%04x.%04x available.\n",
- 				udi.vendorNo,udi.productNo,udi.releaseNo);
-+#endif
- 			if (!force) return(1);
- 		};
- 	} else {
-@@ -453,8 +477,13 @@
- 		else
- 			l++;
- 
-+#ifdef BSD
-+		snprintf(tmp,sizeof(tmp),"%04x.%04x.%04x",
-+			udi.udi_vendorNo,udi.udi_productNo,udi.udi_releaseNo);
-+#else
- 		snprintf(tmp,sizeof(tmp),"%04x.%04x.%04x",
- 			udi.vendorNo,udi.productNo,udi.releaseNo);
-+#endif
- 
- 		if (strncmp(l,tmp,strlen(tmp))) {
- 			fprintf(stderr,"The firmware specified does not match the device: %s\n",tmp);
---- aw/aw.c.orig	Thu Oct 10 14:51:43 2002
-+++ aw/aw.c	Thu Oct 10 14:55:06 2002
-@@ -83,15 +83,26 @@
- #define SURE(x) \
- 	(((x!=NULL) && (*x !='\0')) ? x : "<not defined>")
- 
-+#ifdef __FreeBSD__
-+        printf("Device information: vendor %04x (%s) product %04x (%s) rev %s addr %x\n",
-+                        udi.udi_vendorNo, SURE(udi.udi_vendor), 
-+                        udi.udi_productNo, SURE(udi.udi_product),
-+                        SURE(udi.udi_release), udi.udi_addr);
-+#else
-         printf("Device information: vendor %04x (%s) product %04x (%s) rev %s addr %x\n",
-                         udi.vendorNo, SURE(udi.vendor), 
-                         udi.productNo, SURE(udi.product),
-                         SURE(udi.release), udi.addr);
-+#endif
- 	close(fd);
- 
- 	/* vendor 0854 (ActiveWire, Inc.) product 0101 (ActiveWire USB) rev 0.00 
- 	 */
-+#ifdef __FreeBSD__
-+	if ((udi.udi_vendorNo != 0x854) || (udi.udi_productNo != 0x101)) {
-+#else
- 	if ((udi.vendorNo != 0x854) || (udi.productNo != 0x101)) {
-+#endif
- 		fprintf(stderr,"Sorry, does not seem to be an ActiveWire board. Aborted\n");
- 		exit(1);
- 	}
-	
-
-
diff --git a/misc/ezload/pkg-descr b/misc/ezload/pkg-descr
index df24aa4..c6604cd 100644
--- a/misc/ezload/pkg-descr
+++ b/misc/ezload/pkg-descr
@@ -1,5 +1,5 @@
 The utility allows you to download firmware into and upload firmware from the
-memory of a EZ-USB chip.
+memory of a Cypress EZ-USB chip (AN2131 & friends).
 
 The chip is a generic 8051 based programmeble device. To function in a specific
 device, e.g. a USB to Parallel port convertor, the 8051 needs application
@@ -7,9 +7,6 @@ specific 8051 firmware code.
 
 The input file or the produced output file is in Intel Hex format.
 
-An example program for the ActiveWire board is included, including the
-Hex file with firmware for it. The board is available from
+WWW:	http://proj.bpsw.biz/ezload/
 
-WWW:	http://www.ActiveWireInc.com/
-
-- Nick Hibma (n_hibma@freebsd.org) and Dirk van Gulik (dirkx@webweaving.org)
+- Max Campos (mcampos@bpsw.biz)
diff --git a/misc/ezload/pkg-plist b/misc/ezload/pkg-plist
index c1172ed..6ccfd2c 100644
--- a/misc/ezload/pkg-plist
+++ b/misc/ezload/pkg-plist
@@ -1,6 +1,7 @@
 bin/ezdownload
 bin/ezupload
 bin/aw
+share/usb/firmware/06cd.010b.8001.hex
 share/usb/firmware/0854.0100.0000.hex
 share/usb/firmware/0854.0100.0001.hex
 share/usb/firmware/README