- Just another checkpoint commit in the cleanup of the Mailman port.

- Add a (non-standard) $PKGOPTS file (currently $FILESDIR/pkg-opts) to
  document the user configurable build time variables supported by the port.
  Add a target "options" to Makefile to display build time options in a human
  readable format.  Remove reams of comments from Makefile - superseded by
  $PKGOPTS.
- Clean up the killing of running qrunner processes in $PKGDEINSTALL.
- Bump the $PORTREVISION.  (Yes, again.)

4 files changed, 76 insertions, 53 deletions

diff --git a/mail/mailman/Makefile b/mail/mailman/Makefile
index c85c9bf..68ffd9d 100644
--- a/mail/mailman/Makefile
+++ b/mail/mailman/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	mailman
 PORTVERSION=	2.0.8
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	mail
 MASTER_SITES=	http://www.list.org/ \
 		${MASTER_SITE_GNU} \
@@ -24,38 +24,24 @@ CONFIGURE_ARGS=	--prefix=${MAILMANDIR} \
 		--with-python=${PYTHON_CMD} \
 		--with-mail-gid=${MAIL_GID} --with-cgi-gid=${CGI_GID}
 USE_PYTHON=	yes
+PKGOPTS=	${FILESDIR}/pkg-opts
 
 .include <bsd.port.pre.mk>
 
-# These variables may be tweaked if required.  However, it is recommended
-# that the USERID and GROUPID not be changed.
+# The Mailman port supports a number of variables that may be tweaked at
+# build time.  Getting the values of some of them right is crucial!
+# Perform a "make options" to see more information on these variables.
 #
 USERNAME?=	mailman
 USERID?=	91
 GROUPNAME?=	${USERNAME}
 GROUPID?=	${USERID}
 MMDIR?=		mailman
-
-# Getting the value of MAIL_GID right is crucial to getting Mailman to work
-# with your MTA.  By default, this port works with sendmail.  If you're using
-# an alternative MTA installed from ports, you should set MAIL_GID at build
-# time according to the following table.  (Please contact this port's
-# maintainer if you can fill in the blanks, or to report mistakes!)
-#
-# MTA     | MAIL_GID | Submitted by
-# Exim    | 6        | <wjv>
-# Postfix | 65534    | <shamrock@cypherpunks.to>
-# Qmail   | ???      |
-#
 .if ${OSVERSION} >= 450000
 MAIL_GID?=	26
 .else
 MAIL_GID?=	1
 .endif
-
-# By default, this port works with the current port of Apache.  If your WWW
-# server executes CGI scripts under a different GID, you'll have to set this
-# at build time.
 CGI_GID?=	80
 
 MAILMANDIR=	${PREFIX}/${MMDIR}
@@ -64,11 +50,25 @@ PKGINSTALL=	${WRKDIR}/pkg-install
 PKGDEINSTALL=	${WRKDIR}/pkg-deinstall
 PLIST_SUB=	MMDIR=${MMDIR} MMGRP=${GROUPNAME}
 
+options:
+	@ ${ECHO_MSG} "===>  Build options for ${PKGNAME}:"
+	@ ${PERL} -ne '/^#/ || /^\s/ && print || \
+	  print sprintf "* %s [%s]\n  %s", split(/\|/)' ${PKGOPTS}
+
+post-extract:
+.if !defined(BATCH)
+	@ ${TEST} -r ${PKGOPTS} && \
+	  (${ECHO_MSG} '-------------------------------------------------------------------------'; \
+	   ${ECHO_MSG} 'Perform a "make options" to see a list of available installation options.'; \
+	   ${ECHO_MSG} '-------------------------------------------------------------------------')
+.endif
+
 pre-configure:
 	@ ${SED} -e 's#%%USER%%#${USERNAME}#g' -e 's#%%UID%%#${USERID}#g' \
 	  -e 's#%%GROUP%%#${GROUPNAME}#g' -e 's#%%GID%%#${GROUPID}#g' \
 	  -e 's#%%MAILMANDIR%%#${MAILMANDIR}#g' pkg-install > \
 	  ${PKGINSTALL}
+# Mailman's configure script needs the "mailman" user/group to exist.
 	@ ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
 
 post-configure:
@@ -79,29 +79,21 @@ post-configure:
 	@ ${SED} -e 's#%%MAILMANDIR%%#${MAILMANDIR}#g' \
 	  -e 's#%%DOCSDIR%%#${DOCSDIR}#g' pkg-message > ${PKGMESSAGE}
 
-pre-build:
-.if !defined(BATCH)
-	@ ${ECHO_MSG} "-------------------------------------------------------"
-	@ ${ECHO_MSG} "  If you're using an alternative MTA (not Sendmail)"
-	@ ${ECHO_MSG} "  OR an older version of Sendmail, you may have to"
-	@ ${ECHO_MSG} "  set MAIL_GID to the gid under which your MTA is"
-	@ ${ECHO_MSG} "  executing.  See the comments in the port's"
-	@ ${ECHO_MSG} "  Makefile for further information."
-	@ ${ECHO_MSG} "-------------------------------------------------------"
-.endif
+pre-install:
+	@ ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
 
 post-install:
 .for dir in cron scripts
 	@ ${PYTHON_CMD} ${PYTHON_LIBDIR}/compileall.py ${MAILMANDIR}/${dir}
 .endfor
 	@ ${CHGRP} -R ${GROUPNAME} ${MAILMANDIR}
-	@ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
 .if !defined(NOPORTDOCS)
 	@ ${MKDIR} ${DOCSDIR}
 .for docfile in BUGS FAQ INSTALL NEWS README* UPGRADING
 	@ ${INSTALL_DATA} ${WRKSRC}/${docfile} ${DOCSDIR}
 .endfor
 .endif
+	@ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
 .if !defined(BATCH)
 	@ ${CAT} ${PKGMESSAGE}
 .endif
diff --git a/mail/mailman/files/pkg-opts b/mail/mailman/files/pkg-opts
new file mode 100644
index 0000000..f2f660a
--- /dev/null
+++ b/mail/mailman/files/pkg-opts
@@ -0,0 +1,27 @@
+# Variable|Default value|Short description
+# 	Multi-line/long description (optional).
+# 	Multi-line/long description lines must start with whitespace!
+#
+USERNAME|mailman|The username of the Mailman user
+USERID|92|The user ID of the Mailman user
+	It is recommended that you do not change this option.
+GROUPNAME|mailman|The group to which the Mailman user will belong
+GROUPID|92|The group ID for the Mailman user
+	It is recommended that you do not change this option.
+MMDIR|mailman|Mailman will be installed in ${PREFIX}/${MMDIR}
+MAIL_GID|26|The group id under which your MTA performs mail delivery
+	Getting the value of MAIL_GID right is crucial to getting Mailman to
+	work with your MTA.  By default this port works with sendmail.  If
+	you're using an alternative MTA installed from ports, you should set
+	MAIL_GID at build time according to the following table.  (Please
+	contact this port's maintainer if you can fill in the blanks, or to
+	report mistakes!)
+	----------------------------------------------
+	MTA     | MAIL_GID | Submitted by
+	Exim    | 6        | <wjv>
+	Postfix | 65534    | <shamrock@cypherpunks.to>
+	Qmail   | ???      |
+GGI_GID|80|The group id under which your web server executes CGI scripts
+	By default, this port works with the current port of Apache.  If your
+	WWW server executes CGI scripts under a different GID, you'll have to
+	set this at build time.
diff --git a/mail/mailman/pkg-deinstall b/mail/mailman/pkg-deinstall
index 2a9ce66..d9aab31 100644
--- a/mail/mailman/pkg-deinstall
+++ b/mail/mailman/pkg-deinstall
@@ -19,29 +19,29 @@ zero_crontab() {
 
   u=$1
   
-  echo -n "Zeroing Mailman user's crontab(5) file... "
+  echo -n 'Zeroing crontab(5) file belonging to user "%%USER%%"... '
   crontab -u ${u} /dev/null || exit
-  echo "done."
+  echo 'done.'
+  echo '(The crontab(5) will be deleted completely when user "%%USER%%" is removed.)'
 }
 
 export PATH=/bin:/usr/bin:/usr/sbin
 
 case $2 in
-
 DEINSTALL)
   zero_crontab %%USER%%
-  if ps -axwww | grep -q qrunner; then
-    echo "Killing all running qrunning processes."
-    killall qrunner
+  if ps -axwU %%USER%% | grep -q python; then
+    echo 'Killing all running processes belonging to user "%%USER%%".'
+    killall -u %%USER%% python
     sleep 2
   fi
   ;;
 
 POST-DEINSTALL)
   if [ -d %%MAILMANDIR%% ]; then
-    echo "%%MAILMANDIR%% is not empty - this installation may have active lists"
-    echo "- The \"%%USER%%\" user and \"%%GROUP%%\" group were therefore not deleted."
-    echo "- You may delete them with \"pw userdel %%USER%%\"."
+    echo '%%MAILMANDIR%% is not empty - this installation may have active lists!'
+    echo '- The "%%USER%%" user and "%%GROUP%%" group were therefore not deleted.'
+    echo '- You may delete them with "pw userdel %%USER%%".'
   else
     delete_account %%USER%% %%GROUP%%
   fi
diff --git a/mail/mailman/pkg-descr b/mail/mailman/pkg-descr
index b2b6e98..9f8660f 100644
--- a/mail/mailman/pkg-descr
+++ b/mail/mailman/pkg-descr
@@ -1,17 +1,21 @@
-Mailman is software to help manage email discussion lists, much like Majordomo
-and Smartmail. Unlike most similar products, Mailman gives each mailing list a
-web page, and allows users to subscribe, unsubscribe, etc. over the web. Even
-the list manager can administer his or her list entirely from the web. Mailman
-also integrates most things people want to do with mailing lists, including
-archiving, mail-to-news gateways, integrated bounce handling, spam prevention,
-email-based admin commands, direct SMTP delivery (with fast bulk mailing),
-support for virtual domains, and more. 
+Paraphrasing the website:
 
-Mailman runs on most Un*x-like systems, is compatible with most web servers and
-browsers, and most SMTP servers. Mailman requires Python version 1.5 or newer.
-Python is a free object-oriented scripting language. A few files are written in
-C for security purposes. 
+  Mailman is a mailing list manager (MLM); that is, software to help manage
+  email discussion lists, much like Majordomo, LISTSERV, and the like.
+  Unlike most similar products, Mailman gives each mailing list a web page
+  and allows users to subscribe, unsubscribe, and change their preferences
+  via the web.  Even a list manager can administer his or her list(s)
+  entirely via the web.  Mailman integrates many common MLM features,
+  including web-based archiving (though it also has hooks for external
+  archivers), mail-to-news gateways, bounce handling, spam prevention,
+  Majordomo-style email-based list administration, direct SMTP delivery (with
+  fast bulk mailing), digest delivery, virtual domain support, and more. 
 
-The manual is still only a set of READMEs provided in the Mailman distribution.
+Mailman is written mostly in Python (with a smattering of C where necessary
+for security purposes), and includes hooks to make it easily scriptable and
+extensible.  It is compatible with most web servers and browsers, and most
+mail transfer agents (mail servers).  Mailman's documentation may be found on
+its website.
 
-WWW: http://www.list.org/
+Author: Barry Warsaw <barry@zope.com> and the Mailman Cabal
+WWW:    http://www.list.org/