I think most of us are familiar with that particular program.

12 files changed, 689 insertions, 0 deletions

diff --git a/mail/qmail/Makefile b/mail/qmail/Makefile
new file mode 100644
index 0000000..67880f2
--- /dev/null
+++ b/mail/qmail/Makefile
@@ -0,0 +1,139 @@
+# New ports collection makefile for:	qmail
+# Version required:	1.03
+# Date created:		25 May 1998
+# Whom:			Mario S F Ferreira <lioux@gns.com.br> et al.
+#
+# $Id$
+#
+
+DISTNAME=	qmail-1.03
+CATEGORIES=	mail
+MASTER_SITES=	ftp://koobera.math.uic.edu/pub/software/ \
+		ftp://ftp.hpcl.titech.ac.jp/qmail/ \
+		ftp://ftp.net.ohio-state.edu/pub/networking/mail/qmail/ \
+		ftp://ftp.ntnu.no/pub/unix/mail/qmail/ \
+		ftp://ftp.mira.net.au/pub/unix/mail/qmail/ \
+		ftp://ftp.id.wustl.edu/pub/qmail/ \
+		ftp://ftp.pipex.net/mirrors/qmail/ \
+		ftp://ftp.jp.qmail.org/qmail/
+#PATCH_SITES=	http://hippo.ail-inc.co.jp/air/ports/patches/
+#PATCHFILES=	patch-qmail-date-localtime.gz \
+#		patch-qmail-smtpd.gz
+
+MAINTAINER=	lioux@gns.com.br
+
+# A normal qmail installation puts everything into /var/qmail/.
+# If you want to install to /usr/local/, then "/usr/local/qmail" is
+# suggested instead of "/usr/local", but both will work.
+PREFIX=		/var/qmail
+
+ALL_TARGET=	default dot-qmail.5 qmail-control.5 qmail-getpw.8 \
+		qmail-limits.7 qmail-newmrh.8 qmail-newu.8 qmail-pw2u.8 \
+		qmail-send.8 qmail-start.8 qmail-users.5
+
+MAN1=	forward.1 condredirect.1 bouncesaying.1 except.1 maildirmake.1 \
+	maildir2mbox.1 maildirwatch.1 mailsubj.1 qreceipt.1 qbiff.1 preline.1 \
+	tcp-env.1
+MAN5=	addresses.5 envelopes.5 maildir.5 mbox.5 dot-qmail.5 qmail-control.5 \
+	qmail-header.5 qmail-log.5 qmail-users.5 tcp-environ.5
+MAN7=	forgeries.7 qmail-limits.7 qmail.7
+MAN8=	qmail-local.8 qmail-lspawn.8 qmail-getpw.8 qmail-remote.8 \
+	qmail-rspawn.8 qmail-clean.8 qmail-send.8 qmail-start.8 splogger.8 \
+	qmail-queue.8 qmail-inject.8 qmail-showctl.8 qmail-newmrh.8 \
+	qmail-newu.8 qmail-pw2u.8 qmail-qread.8 qmail-qstat.8 qmail-tcpok.8 \
+	qmail-tcpto.8 qmail-pop3d.8 qmail-popup.8 qmail-qmqpc.8 qmail-qmqpd.8 \
+	qmail-qmtpd.8 qmail-smtpd.8 qmail-command.8
+
+DOCFILES=	${WRKSRC}/BLURB ${WRKSRC}/BLURB2 ${WRKSRC}/BLURB3 \
+		${WRKSRC}/BLURB4 ${WRKSRC}/INTERNALS ${WRKSRC}/SECURITY \
+		${WRKSRC}/THOUGHTS ${FILESDIR}/PORT_NOTES
+
+# The following docfiles are normally installed with qmail-hier
+DOCFILES+=	${WRKSRC}/FAQ ${WRKSRC}/UPGRADE ${WRKSRC}/SENDMAIL \
+		${WRKSRC}/INSTALL ${WRKSRC}/INSTALL.alias \
+		${WRKSRC}/INSTALL.ctl ${WRKSRC}/INSTALL.ids \
+		${WRKSRC}/INSTALL.maildir ${WRKSRC}/INSTALL.mbox \
+		${WRKSRC}/INSTALL.vsm ${WRKSRC}/TEST.deliver \
+		${WRKSRC}/TEST.receive ${WRKSRC}/REMOVE.sendmail \
+		${WRKSRC}/REMOVE.binmail ${WRKSRC}/PIC.local2alias \
+		${WRKSRC}/PIC.local2ext ${WRKSRC}/PIC.local2local \
+		${WRKSRC}/PIC.local2rem ${WRKSRC}/PIC.local2virt \
+		${WRKSRC}/PIC.nullclient ${WRKSRC}/PIC.relaybad \
+		${WRKSRC}/PIC.relaygood ${WRKSRC}/PIC.rem2local
+
+# More files normally installed with from hier.c
+BOOTFILES=	${WRKSRC}/home ${WRKSRC}/home+df ${WRKSRC}/proc \
+		${WRKSRC}/proc+df ${WRKSRC}/binm1 ${WRKSRC}/binm1+df \
+		${WRKSRC}/binm2 ${WRKSRC}/binm2+df ${WRKSRC}/binm3 \
+		${WRKSRC}/binm3+df
+
+# Supplied by Stuart Henderson <stuart@internationalschool.co.uk>
+BOOTFILES+=	${FILESDIR}/maildir
+
+CONFIGUREFILES=	${WRKSRC}/install ${WRKSRC}/dnsfq ${WRKSRC}/hostname \
+		${WRKSRC}/dnsip ${WRKSRC}/ipmeprint ${WRKSRC}/dnsptr
+
+PLIST=	${WRKDIR}/PLIST
+
+.if (${PREFIX} == "/usr/local")
+DOCDIR=	share/doc/qmail
+.else
+DOCDIR=	doc
+.endif
+
+NO_MTREE=	yes
+
+# If you want to change the qmail users, they must be changed in both
+# work/*/conf-users and pkg/INSTALL.
+
+do-configure:
+	@# Create/Check the necessary groups/users
+	@PKG_PREFIX=${PREFIX} /usr/bin/perl ${PKGDIR}/INSTALL
+	@${ECHO} ${CC} ${CFLAGS} > ${WRKSRC}/conf-cc
+	@${ECHO} ${PREFIX} > ${WRKSRC}/conf-qmail
+	@${SED} s+@DOCDIR@+${DOCDIR}+g ${FILESDIR}/pkg.PLIST > ${PLIST}
+
+do-install:
+	@# Check again, just in case (ideally should error if not found)
+	@PKG_PREFIX=${PREFIX} /usr/bin/perl ${PKGDIR}/INSTALL
+	@${MKDIR} ${PREFIX}/${DOCDIR} ${PREFIX}/configure
+	@cd ${WRKSRC} ; ./install
+	@${INSTALL_PROGRAM} ${CONFIGUREFILES} ${PREFIX}/configure
+	@${INSTALL_SCRIPT} ${WRKSRC}/config ${PREFIX}/configure
+	@${INSTALL_SCRIPT} ${BOOTFILES} ${PREFIX}/boot
+.for i in 1 5 7 8
+	@${MKDIR} ${PREFIX}/man/man$i
+.for j in ${MAN${i}}
+	@${INSTALL_MAN} ${WRKSRC}/$j ${PREFIX}/man/man${i}
+.endfor
+.endfor
+.if !defined(NOPORTDOCS)
+	@${INSTALL_DATA} ${DOCFILES} ${PREFIX}/${DOCDIR}
+.endif
+.if defined(PACKAGE_BUILDING)
+	@${ECHO} "FreeBSD Binary package QMail installation" \
+		> ${PREFIX}/${DOCDIR}/SYSDEPS
+.else
+	@cd ${WRKSRC} && ${CAT} `${CAT} SYSDEPS` \
+		> ${PREFIX}/${DOCDIR}/SYSDEPS
+.endif
+.for i in root postmaster mailer-daemon
+	@${TOUCH} ${PREFIX}/alias/.qmail-${i}
+.endfor
+	@# This is not part of qmail proper, hence the 2nd class citizenship
+	@${INSTALL_SCRIPT} ${FILESDIR}/mkaliasdir ${PREFIX}/${DOCDIR}
+	@cd ${PREFIX}/configure ; ./config
+	@${LN} -sf ${PREFIX}/rc /usr/local/etc/rc.d/qmail.sh
+	@${ECHO}
+	@${SED} s!/usr/local/!${PREFIX}/!g ${PKGDIR}/MESSAGE | /usr/bin/fmt
+
+# The users are instructed (in PORT_NOTES) to install ${QUEUE_DIR}/rc
+# themselves.  Each /var/qmail/ should have its own rc.  On many machines,
+# /usr/local/ is nfs mounted and /var/qmail/ is local.  An individual
+# machine may want/not-want qmail.  Pity we can't add a dir to local_startup
+# from here.
+
+# Wouldn't hurt to provide an "enable_qmail" and "disable_sendmail" target
+# that do 1) and 2) above and disable the existing sendmail, respectively.
+
+.include <bsd.port.mk>
diff --git a/mail/qmail/distinfo b/mail/qmail/distinfo
new file mode 100644
index 0000000..4bbcf21
--- /dev/null
+++ b/mail/qmail/distinfo
@@ -0,0 +1 @@
+MD5 (qmail-1.03.tar.gz) = 622f65f982e380dbe86e6574f3abcb7c
diff --git a/mail/qmail/files/PORT_NOTES b/mail/qmail/files/PORT_NOTES
new file mode 100644
index 0000000..6c2928c
--- /dev/null
+++ b/mail/qmail/files/PORT_NOTES
@@ -0,0 +1,122 @@
+This text was originally taken from the qmail INSTALL file that you
+will find in /var/qmail/doc/.  In addition to INSTALL, there are many
+other potentially important qmail documents there.
+
+As with all ports, the ports maintainer (me!) makes NO WARRANTIES of
+any kind: expressed, implied, or other; about the reliability or
+security of this package.  Any damage or problems derived from its
+usage or related to it are neither my responsibility nor the software
+author's.  This package is provided AS IS.
+
+Although I am probably sounding cold and harsh, believe me: qmail is
+one of the most reliable and easy-to-use softwares around.  However,
+this also is NOT a WARRANTY.  It is just an opinion.  :)
+
+The qmail port will normally install into /var/qmail/.  If you changed
+this to /usr/local/, then please note that the docs have been
+installed into /usr/local/share/doc/qmail/ (as opposed to
+/usr/local/doc/).
+
+If you wish to rerun the automatic configuration utility, do:
+
+# cd /var/qmail/configure ; ./config
+
+If you are upgrading from a previous version of qmail, you should read
+/var/qmail/doc/UPGRADE and follow all the steps after #6.
+
+
+[from /var/qmail/doc/INSTALL]
+
+SAVE COPIES OF YOUR OUTGOING MAIL! Like any other piece of software (and
+information generally), the qmail system comes with NO WARRANTY. It's
+much more secure and reliable than sendmail, but that's not saying much.
+
+[pre-build instructions elided]
+
+To create /var/qmail and configure qmail (won't interfere with sendmail):
+
+[#1 - #3 elided]
+
+ 4. Read INSTALL.ctl and FAQ. Minimal survival command:
+       # ./config
+
+[The "minimal" command has already been performed.]
+
+ 5. Read INSTALL.alias. Minimal survival command:
+       # (cd ~alias; touch .qmail-postmaster .qmail-mailer-daemon .qmail-root)
+       # chmod 644 ~alias/.qmail*
+
+[The "minimal" command has already been performed.]
+
+ 6. Read INSTALL.mbox and INSTALL.vsm.
+
+ 7. Read INSTALL.maildir.
+
+ 8. Copy /var/qmail/boot/home (or proc) to /var/qmail/rc.
+
+[When you do this, qmail will be started automatically the next time
+ you boot.  This is because the command
+ ``ln -s /var/qmail/rc /usr/local/etc/rc.d'' has been executed.  There
+ is a number of sample bootfiles provided.  Not all of them will work.]
+
+To test qmail deliveries (won't interfere with sendmail):
+
+ 9. Enable deliveries of messages injected into qmail:
+       # csh -cf '/var/qmail/rc &'
+
+10. Read TEST.deliver.
+
+
+To upgrade from sendmail to qmail:
+
+11. Read SENDMAIL. This is what your users will want to know about the
+    switch from sendmail to qmail.
+
+12. Read REMOVE.sendmail. You must remove sendmail before installing
+    qmail.
+
+[Do not disable sendmail as instructed in REMOVE.sendmail step #1.
+ Instead, change the sendmail_enable line in /etc/rc.conf to read
+
+        sendmail_enable="NO"
+ ]
+
+13. Read REMOVE.binmail.
+
+14. Add
+            csh -cf '/var/qmail/rc &'
+    to your boot scripts, so that the qmail daemons are restarted
+    whenever your system reboots. Make sure you include the &.
+
+[Do not do this.  Unless you remove the symlink
+ /usr/local/etc/rc.d/qmail.sh, the script /var/qmail/rc will be run
+ everytime you boot.  See also "local_startup" in /etc/rc.conf.]
+
+15. Make qmail's ``sendmail'' wrapper available to MUAs:
+       # ln -s /var/qmail/bin/sendmail /usr/lib/sendmail
+       # ln -s /var/qmail/bin/sendmail /usr/sbin/sendmail
+    /usr/sbin might not exist on your system.
+
+16. Set up qmail-smtpd in /etc/inetd.conf (all on one line):
+            smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env
+            tcp-env /var/qmail/bin/qmail-smtpd
+
+[A freshly-updated /etc/inetd.conf will have a sample qmail entry that
+ you can simply uncomment.]
+
+17. Reboot. (Or kill -HUP your inetd and make sure the qmail daemons
+    are running.)
+
+18. Read TEST.receive.
+
+
+
+That's it! To report success:
+       % ( echo 'First M. Last'; cat /var/qmail/doc/SYSDEPS ) \
+		| mail djb-qst@cr.yp.to
+Replace First M. Last with your name.
+
+[Note that "cat `cat SYSDEPS`" has changed to "cat /var/qmail/doc/SYSDEPS"]
+
+If you have questions about qmail, join the qmail mailing list; see
+http://pobox.com/~djb/qmail.html.
diff --git a/mail/qmail/files/maildir b/mail/qmail/files/maildir
new file mode 100644
index 0000000..1e7aac8
--- /dev/null
+++ b/mail/qmail/files/maildir
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# Using splogger to send the log through syslog.
+# Using qmail-local to deliver messages to Maildir format by default
+
+exec env - PATH="@PREFIX@/qmail/bin:$PATH" \
+qmail-start ./Maildir/ splogger qmail
diff --git a/mail/qmail/files/mkaliasdir b/mail/qmail/files/mkaliasdir
new file mode 100644
index 0000000..78bb69b
--- /dev/null
+++ b/mail/qmail/files/mkaliasdir
@@ -0,0 +1,109 @@
+#!/usr/bin/perl
+#
+#  Script to populate a Qmail ~alias directory with entries from
+#  an [SZ]mail{er} or sendmail-like aliases file
+#
+#	$Id: mkaliasdir,v 1.2 1997/02/22 07:47:18 tenser Exp $
+#
+#  Dan Cross <tenser@spitfire.ecsel.psu.edu>
+#
+
+require 'getopts.pl';
+
+$ALIASES = "/etc/aliases";
+
+die "$0 must be run as root!\n" if ($< != 0);
+
+do Getopts('vf:');
+
+$verbose = 0 unless ($verbose = $opt_v);
+$aliases = $ALIASES unless ($aliases = $opt_f);
+
+if (($aliasdir = (getpwnam("qalias"))[7]) eq "")
+{
+	die "User qalias does not exist, bailing!\n";
+}
+
+if (($qmaildir = (getpwnam("qmaild"))[7]) eq "")
+{
+	die "User qmaild does not exist, bailing!\n";
+}
+
+$ME = "$qmaildir/control/me";
+
+die "Error opening $ME: $!\n" unless open(ME, "$ME");
+chop($me = <ME>);
+close (ME);
+
+die "Error opening $aliases: $!\n" unless open(ALIASES, "$aliases");
+
+while (<ALIASES>)
+{
+	chop;
+
+	$mode = ">";
+
+	s/#.*$//;
+
+	($target, $data) = split(/:/, $_, 2);
+
+	$data =~ s/^\s+//;
+	$data =~ s/\s+$//;
+
+	next if (/^$/);
+
+	if ($data =~ /^$/)
+	{
+		while (chop($data = <ALIASES>))
+		{
+			$data =~ s/^\s+//;
+			$data =~ s/\s+$//;
+
+			last if ($data !~ /^$/);
+		}
+	}
+
+	$f = "$aliasdir/.qmail-$target";
+
+	@data = split(/\,/, $data);
+	$datum = $data[0];
+
+	if ($datum =~ /^:include:/i)
+	{
+		$datum =~ s/^:include://i;
+		$verbose && print "Symlinking $f to $datum...\n";
+		symlink($datum, $f);
+		shift(@data);
+		$f = $datum;
+		$mode = ">>";
+	}
+
+	open(ALIAS, "$mode$f") || die "Error creating $f: $!\n";
+
+	$verbose && print "Creating $f...\n";
+
+	foreach $datum (@data)
+	{
+		$datum =~ s/"$// if ($datum =~ s/^"// ||
+					$datum =~ s/^\|[ \t]*"/|/);
+
+		if ($datum =~ /^[|\/]/)
+		{
+			print ALIAS $datum, "\n";
+		}
+		else
+		{
+			$datum = "&" . $datum;
+			$datum .= "\@$me" unless ($datum =~ /\@/);
+			print ALIAS "$datum\n";
+		}
+
+		$verbose && print "\tPopulating $f with $datum...\n";
+	}
+
+	close(ALIAS);
+}
+
+close(ALIASES);
+
+exit 0;
diff --git a/mail/qmail/files/patch-aa b/mail/qmail/files/patch-aa
new file mode 100644
index 0000000..55171d4
--- /dev/null
+++ b/mail/qmail/files/patch-aa
@@ -0,0 +1,155 @@
++++ hier.c
+38,47d37
+<   d(auto_qmail,"doc",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/cat1",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/cat5",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/cat7",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/cat8",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/man1",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/man5",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/man7",auto_uido,auto_gidq,0755);
+<   d(auto_qmail,"man/man8",auto_uido,auto_gidq,0755);
+67,101d56
+<   c(auto_qmail,"boot","home",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","home+df",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","proc",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","proc+df",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm1",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm1+df",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm2",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm2+df",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm3",auto_uido,auto_gidq,0755);
+<   c(auto_qmail,"boot","binm3+df",auto_uido,auto_gidq,0755);
+< 
+<   c(auto_qmail,"doc","FAQ",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","UPGRADE",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","SENDMAIL",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.alias",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.ctl",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.ids",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.maildir",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.mbox",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","INSTALL.vsm",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","TEST.deliver",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","TEST.receive",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","REMOVE.sendmail",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","REMOVE.binmail",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.local2alias",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.local2ext",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.local2local",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.local2rem",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.local2virt",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.nullclient",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.relaybad",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.relaygood",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"doc","PIC.rem2local",auto_uido,auto_gidq,0644);
+< 
+146,251d100
+< 
+<   c(auto_qmail,"man/man5","addresses.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","addresses.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","envelopes.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","envelopes.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","maildir.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","maildir.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","mbox.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","mbox.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","dot-qmail.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","dot-qmail.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","qmail-control.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","qmail-control.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","qmail-header.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","qmail-header.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","qmail-log.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","qmail-log.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","qmail-users.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","qmail-users.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man5","tcp-environ.5",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat5","tcp-environ.0",auto_uido,auto_gidq,0644);
+< 
+<   c(auto_qmail,"man/man7","forgeries.7",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat7","forgeries.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man7","qmail-limits.7",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat7","qmail-limits.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man7","qmail.7",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat7","qmail.0",auto_uido,auto_gidq,0644);
+< 
+<   c(auto_qmail,"man/man1","forward.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","forward.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","condredirect.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","condredirect.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","bouncesaying.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","bouncesaying.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","except.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","except.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","maildirmake.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","maildirmake.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","maildir2mbox.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","maildir2mbox.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","maildirwatch.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","maildirwatch.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","mailsubj.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","mailsubj.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","qreceipt.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","qreceipt.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","qbiff.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","qbiff.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","preline.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","preline.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man1","tcp-env.1",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat1","tcp-env.0",auto_uido,auto_gidq,0644);
+< 
+<   c(auto_qmail,"man/man8","qmail-local.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-local.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-lspawn.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-lspawn.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-getpw.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-getpw.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-remote.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-remote.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-rspawn.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-rspawn.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-clean.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-clean.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-send.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-send.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-start.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-start.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","splogger.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","splogger.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-queue.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-queue.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-inject.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-inject.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-showctl.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-showctl.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-newmrh.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-newmrh.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-newu.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-newu.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-pw2u.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-pw2u.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-qread.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-qread.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-qstat.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-qstat.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-tcpok.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-tcpok.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-tcpto.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-tcpto.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-pop3d.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-pop3d.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-popup.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-popup.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-qmqpc.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-qmqpc.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-qmqpd.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-qmqpd.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-qmtpd.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-qmtpd.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-smtpd.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-smtpd.0",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/man8","qmail-command.8",auto_uido,auto_gidq,0644);
+<   c(auto_qmail,"man/cat8","qmail-command.0",auto_uido,auto_gidq,0644);
diff --git a/mail/qmail/files/patch-ab b/mail/qmail/files/patch-ab
new file mode 100644
index 0000000..43a507a
--- /dev/null
+++ b/mail/qmail/files/patch-ab
@@ -0,0 +1,5 @@
++++ conf-groups
+2c2
+< nofiles
+---
+> qnofiles
diff --git a/mail/qmail/files/patch-ac b/mail/qmail/files/patch-ac
new file mode 100644
index 0000000..ded1166
--- /dev/null
+++ b/mail/qmail/files/patch-ac
@@ -0,0 +1,13 @@
++++ install.c
+12a13
+> noc;  /* hack for bin package install -- see port pkg/INSTALL */
+77a79
+>  if (!noc) {
+117a120
+>  }
+155c158
+< void main()
+---
+> void main(argc, argv)
+156a160
+>   noc=--argc;
diff --git a/mail/qmail/pkg-comment b/mail/qmail/pkg-comment
new file mode 100644
index 0000000..96f65ee
--- /dev/null
+++ b/mail/qmail/pkg-comment
@@ -0,0 +1 @@
+A SECURE, reliable, efficient, simple, and FAST MTA for UNIX systems.
diff --git a/mail/qmail/pkg-descr b/mail/qmail/pkg-descr
new file mode 100644
index 0000000..19ffcfd
--- /dev/null
+++ b/mail/qmail/pkg-descr
@@ -0,0 +1,23 @@
+The qmail program is a secure, reliable, efficient simple message
+transfer agent.  It is meant to be a replacement for the entire
+sendmail-binmail system that most UNIX hosts use.
+
+Although qmail holds security and reliability as its top two
+priorities, it is also fast.  On a Pentium under BSD/OS, qmail can
+easily handle 200000 separate messages per day that are injected
+and must then be delivered to local mailboxes!
+
+Security and reliability are qmail's two strengths, however.  The
+qmail package ensures a message, once accepted, will never be lost.
+An optional new mailbox format, maildir, even lets users safely
+read their mail over NFS, while still accepting new mail deliveries.
+
+The following features are supported: host and user masquerading,
+full host hiding, virtual domains, null clients, list-owner rewriting,
+relay control, double-bounce recording, arbitrary RFC 822 address
+lists, cross-host mailing-list loop detection, per-recipient
+checkpointing, downed host backoffs, independent message retry
+schedules, a drop-in sendmail replacement, and more!
+
+http://pobox.com/~djb/qmail.html
+http://www.qmail.org/
diff --git a/mail/qmail/pkg-install b/mail/qmail/pkg-install
new file mode 100644
index 0000000..05fdd88
--- /dev/null
+++ b/mail/qmail/pkg-install
@@ -0,0 +1,106 @@
+#!/usr/bin/perl
+#
+
+# The post-install script
+if ($ARGV[1] eq "POST-INSTALL") {
+	# Build the queue directory structure
+	# Some of these directories will have been created during the
+	# pkg_add(1) process.  Hopefully this will at least make sure
+	# that they have the right permissions and owners.
+
+	system ("$ENV{PKG_PREFIX}/configure/install x");
+	system ("cd $ENV{PKG_PREFIX}/configure && ./config");
+
+	utime time, time, "$ENV{PKG_PREFIX}/alias/.qmail-postmaster", "$ENV{PKG_PREFIX}/alias/.qmail-root", "$ENV{PKG_PREFIX}/alias/.qmail-mailer-daemon";
+	exit 0;
+}
+
+@groups = ("qmail", "qnofiles");
+%users = ('qmaild', "qnofiles", 'qmaill', "qnofiles", 'qmailp', "qnofiles",
+          'qmailq', "qmail", 'qmailr', "qmail", 'qmails', "qmail");
+# daemon, local, pop, queue, remote, deliver, respectively.
+# alias is a special case above...
+%gids = ("qmail", 80, "qnofiles", 81);
+%uids = ('alias', 81, 'qmaild', 82, 'qmaill', 83, 'qmailp', 84, 'qmailq', 85,
+         'qmailr', 86, 'qmails', 87);
+
+if ($ENV{PACKAGE_BUILDING} || $ARGV[1] eq "PRE-INSTALL") {
+	$doguid=1;  # Make sure we get the assigned guids.
+}
+
+foreach $group (@groups) {
+	if (! getgrnam ($group)) {
+		do checkrpw;  # May exit
+
+		$x = "-g $gids{$group}";
+		$result = system ("/usr/sbin/pw groupadd $group $x");
+		if ($result) {
+			die "Failed to add group $group as gid $gids{$group}\n";
+		}
+	}
+}
+
+if (! getpwnam ("alias")) {
+	do checkrpw;  # May exit
+
+	$x = "-u $uids{'alias'}";
+	$result = system ("/usr/sbin/pw useradd alias -g qnofiles -d \"$ENV{PKG_PREFIX}/alias\" -s /nonexistent $x");
+	if ($result) {
+		die "Failed to add user alias as uid $uids{'alias'}\n";
+	}
+}
+
+foreach $user (keys %users) {
+	if (! getpwnam ($user)) {
+		do checkrpw;  # May exit
+
+		$x = "-u $uids{$user}";
+		$result = system ("/usr/sbin/pw useradd $user -g $users{$user} -d \"$ENV{PKG_PREFIX}\" -s /nonexistent $x");
+		if ($result) {
+			die "Failed to add user $user as uid $uids{$user}\n";
+		}
+	}
+}
+
+# Check that all gids/uids are as they should be...
+# If we are being installed as a package...
+if ($doguid) {
+	foreach $group (@groups) {
+		if (getgrnam($group) != $gids{$group}) {
+			die "Group $group should have gid $gids{$group}\n";
+		}
+	}
+
+	foreach $user (keys %users) {
+		if (getpwnam($user) != $uids{$user}) {
+			die "User $user should have uid $uids{$user}\n";
+		}
+	}
+	if (getpwnam("alias") != $uids{"alias"}) {
+		die "User alias should have uid $uids{'alias'}\n";
+	}
+}
+
+exit 0;
+
+sub checkrpw {
+	if (! -x "/usr/sbin/pw") {
+		print <<'EOM';
+This system looks like a pre-2.2 version of FreeBSD.  We see that it
+is missing the "pw" utility.  We need this utility.  Please get and
+install it, and try again.  You can get the source from:
+
+  ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/usr.sbin/pw.tar.gz
+
+EOM
+		die "No /usr/sbin/pw";
+	}
+
+	if ($> != 0) {
+		print "It is necessary to add missing qmail users/groups at";
+		print "this stage.  Please either add them manually or retry";
+		print "as root.";
+		# Let pw(1) signal the failure so the user can see which
+		# group/user is actually missing.
+	}
+}
diff --git a/mail/qmail/pkg-message b/mail/qmail/pkg-message
new file mode 100644
index 0000000..008d54b
--- /dev/null
+++ b/mail/qmail/pkg-message
@@ -0,0 +1,8 @@
+	ATTENTIONATTENTION:
+
+Please make sure that you read /var/qmail/doc/PORT_NOTES.
+It contains important information about testing and configuring
+qmail, and finally replacing sendmail with qmail.
+
+You should also add /var/qmail/man to your MANPATH (see manpath(1)
+or login.conf(5)).