From 8c5a743259480ebd0cfdbb17fbde8584e34b2aa4 Mon Sep 17 00:00:00 2001
From: Bert Lange <b.lange@hzdr.de>
Date: Wed, 15 Apr 2015 13:54:39 +0200
Subject: clean up

---
 uc_str912/prj_main_add/prj/jtagkey.cfg | 59 ----------------------------------
 1 file changed, 59 deletions(-)
 delete mode 100644 uc_str912/prj_main_add/prj/jtagkey.cfg

(limited to 'uc_str912/prj_main_add/prj/jtagkey.cfg')

diff --git a/uc_str912/prj_main_add/prj/jtagkey.cfg b/uc_str912/prj_main_add/prj/jtagkey.cfg
deleted file mode 100644
index 4a25c96..0000000
--- a/uc_str912/prj_main_add/prj/jtagkey.cfg
+++ /dev/null
@@ -1,59 +0,0 @@
-# daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#
-# interface, if you want to use an other interface
-# you must replace this section here
-#
-#################### interface start ####################
-
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-
-##################### interface end #####################
-
-# jtag speed
-# start slow, speed up after reset
-jtag_khz 16 2000
-
-#delays on reset lines
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 8 0x1 0x1 0xfe
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm966e little reset_halt 1 arm966e
-run_and_halt_time 0 30
-
-target_script 0 reset ./prj/str912_reset.script
-
-target_script 0 gdb_program_config ./prj/str912_program.script
-
-working_area 0 0x50000000 16384 nobackup
-
-#flash bank str9x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
-
-# For more information about the configuration files, take a 
-# look at the "Open On-Chip Debugger (openocd)" documentation.
-- 
cgit v1.1