diff options
Diffstat (limited to 'zpu/hdl/zpu4/dummyfpgalib/ddrsdram/src/ddr_top.vhd')
| -rw-r--r-- | zpu/hdl/zpu4/dummyfpgalib/ddrsdram/src/ddr_top.vhd | 660 |
1 files changed, 0 insertions, 660 deletions
diff --git a/zpu/hdl/zpu4/dummyfpgalib/ddrsdram/src/ddr_top.vhd b/zpu/hdl/zpu4/dummyfpgalib/ddrsdram/src/ddr_top.vhd deleted file mode 100644 index d5e98e1..0000000 --- a/zpu/hdl/zpu4/dummyfpgalib/ddrsdram/src/ddr_top.vhd +++ /dev/null @@ -1,660 +0,0 @@ -library IEEE;
-use IEEE.STD_LOGIC_1164.all;
-use IEEE.STD_LOGIC_UNSIGNED.ALL;
-
-entity ddr_top is
- generic(
- simulate_io_time : boolean := false);
- port ( -- Asyncronous reset and clocks
- areset : in std_logic;
- cpu_clk : in std_logic;
- cpu_clk_2x : in std_logic;
- cpu_clk_4x : in std_logic;
- ddr_in_clk : in std_logic;
- ddr_in_clk_2x : in std_logic;
-
- -- Command interface
- ddr_command : in std_logic_vector(15 downto 0);
- ddr_command_we : in std_logic;
- refresh_en : in std_logic;
-
- -- Data interface signals
- ddr_data_read : out std_logic_vector(31 downto 0); -- Data read from DDR SDRAM
- ddr_data_write : in std_logic_vector(35 downto 0); -- Data to be written to DDR SDRAM
- ddr_req_adr : in std_logic_vector(23 downto 1); -- Request address
- ddr_req : in std_logic; -- Request DDR SDRAM access
- ddr_req_ack : out std_logic; -- Request acknowledge
- ddr_busy : out std_logic; -- Request acknowledge
- ddr_rd_wr_n : in std_logic; -- Access type 1=READ, 0=WRITE
- ddr_req_len : in std_logic; -- Number of 16-bits words to transfer (0=2, 1=8)
- ddr_read_en : out std_logic; -- Enable signal for read data
- ddr_write_en : out std_logic; -- Enable (read) signal for data write
-
- -- DDR SDRAM Signals
- sdr_clk_p : out std_logic; -- ddr_sdram_clock
- sdr_clk_n_p : out std_logic; -- /ddr_sdram_clock
- cke_q_p : out std_logic; -- clock enable
- cs_qn_p : out std_logic; -- /chip select
- ras_qn_p : inout std_logic; -- /ras
- cas_qn_p : inout std_logic; -- /cas
- we_qn_p : inout std_logic; -- /write enable
- dm_q_p : out std_logic_vector(1 downto 0); -- data mask bits, set to "00"
- dqs_q_p : out std_logic_vector(1 downto 0); -- data strobe, only for write
- ba_q_p : out std_logic_vector(1 downto 0); -- bank select
- sdr_a_p : out std_logic_vector(12 downto 0); -- address bus
- sdr_d_p : inout std_logic_vector(15 downto 0)); -- bidir data bus
-end ddr_top;
-
-architecture behave of ddr_top is
-
-attribute keep : string;
-
-signal cpu_clk_tog : std_logic;
-signal ddr_cmd : std_logic_vector(15 downto 0);
-signal ddr_cmd_we_smp : std_logic;
-signal new_command : std_logic;
-
-signal cpu_clk_2x_smp1 : std_logic;
-signal cpu_clk_2x_smp2 : std_logic;
-signal cpu_clk_4x_smp1 : std_logic;
-signal cpu_clk_4x_smp2 : std_logic;
-
-signal clk2_phase : std_logic;
-signal clk4_phase : std_logic_vector(3 downto 0);
-signal clk4_phase_short : std_logic_vector(1 downto 0);
-
-signal ddr_clk_tog : std_logic;
-signal ddr_clk_smp1 : std_logic;
-signal ddr_clk_smp2 : std_logic;
-signal ddr_clk_phase : std_logic;
-
-signal smp_req_adr : std_logic_vector(23 downto 1);
-signal smp_req_type : std_logic;
-signal smp_req_len : std_logic;
-signal ddr_write_en_int : std_logic;
-signal ddr_read_en_int : std_logic;
-
-signal dqs_q : std_logic_vector(1 downto 0);
-signal dqs_oe_n : std_logic_vector(1 downto 0);
-attribute keep of dqs_oe_n:signal is "true";
-signal cas_qn : std_logic;
-signal ras_qn : std_logic;
-signal we_qn : std_logic;
-signal ba_q : std_logic_vector(1 downto 0);
-signal sdr_clk : std_logic;
-signal sdr_clk_n : std_logic;
-signal sdr_a : std_logic_vector(12 downto 0);
-signal sdr_d : std_logic_vector(15 downto 0);
-signal sdr_smp : std_logic_vector(35 downto 0);
-signal sdr_oe_n : std_logic_vector(15 downto 0);
-attribute keep of sdr_oe_n:signal is "true";
-signal sdr_oe_ctrl : std_logic;
-signal sdr_wr_msw : std_logic_vector(17 downto 0);
-attribute keep of sdr_wr_msw:signal is "true";
-signal dm_q : std_logic_vector(1 downto 0);
-
-signal cas_n_smp : std_logic;
-signal ras_n_smp : std_logic;
-signal we_n_smp : std_logic;
-signal read_start_sig : std_logic;
-signal sdr_d_in : std_logic_vector(15 downto 0);
-signal read_time_cnt : std_logic_vector(1 downto 0);
-signal read_input_en : std_logic;
-signal ddr_data_read_int : std_logic_vector(31 downto 0);
-
-signal refresh_pend : std_logic;
-signal refresh_end : std_logic;
-signal refresh_cnt : std_logic_vector(9 downto 0);
-signal refresh_wait_cnt : std_logic_vector(2 downto 0);
-signal refresh_wait_end : std_logic;
-
-signal cas_qn_p_del : std_logic;
-signal ras_qn_p_del : std_logic;
-signal we_qn_p_del : std_logic;
-signal sdr_d_p_del : std_logic_vector(15 downto 0);
-
-type state_type is (idle, act, act_nop1, act_nop2, rd_wr, rd_nop1,
- rd_nop2, pre, pre_nop1, pre_nop2, wr_nop1, wr_nop2,
- wr_nop3, cmd, cpu_pre, refresh, refresh_wait);
-signal ddr_state : state_type;
-
-constant Clk_to_Output : time := 2.2 ns;
-constant Sim_Delay : time := 0.5 ns;
-constant Input_Setup : time := 2.5 ns;
-
-constant Refresh_Interval : std_logic_vector(9 downto 0) := "1111100110";
-
-begin
-
- iotimingon:
- if simulate_io_time generate
- begin
- cas_qn_p_del <= 'X' after 0 ns, cas_qn_p after Input_Setup;
- ras_qn_p_del <= 'X' after 0 ns, ras_qn_p after Input_Setup;
- we_qn_p_del <= 'X' after 0 ns, we_qn_p after Input_Setup;
- sdr_d_p_del <= "XXXXXXXXXXXXXXXX" after 0 ns, sdr_d_p after Input_Setup;
- end generate;
-
- iotimingoff:
- if not simulate_io_time generate
- begin
- cas_qn_p_del <= cas_qn_p;
- ras_qn_p_del <= ras_qn_p;
- we_qn_p_del <= we_qn_p;
- sdr_d_p_del <= sdr_d_p;
- end generate;
-
- ddr_write_en <= ddr_write_en_int;
- ddr_read_en <= ddr_read_en_int;
- ddr_data_read <= ddr_data_read_int;
-
- process(cpu_clk, areset) -- Toggle a flip-flop with cpu_clk, in order
- begin -- to find phase relation with 2x and 4x clocks
- if areset = '1' then
- cpu_clk_tog <= '0';
- elsif (cpu_clk'event and cpu_clk = '1') then
- cpu_clk_tog <= not(cpu_clk_tog) after Sim_Delay;
- end if;
- end process;
-
- process(cpu_clk_2x, areset) -- Find phase relation between cpu_clk and cpu_clk_2x
- begin
- if areset = '1' then
- cpu_clk_2x_smp1 <= '0';
- cpu_clk_2x_smp2 <= '0';
- clk2_phase <= '0';
- elsif (cpu_clk_2x'event and cpu_clk_2x = '1') then
- cpu_clk_2x_smp1 <= cpu_clk_tog after Sim_Delay;
- cpu_clk_2x_smp2 <= cpu_clk_2x_smp1 after Sim_Delay;
- if (cpu_clk_2x_smp1 = '1' and cpu_clk_2x_smp2 = '0') then
- clk2_phase <= '0' after Sim_Delay;
- else
- clk2_phase <= not(clk2_phase) after Sim_Delay;
- end if;
- end if;
- end process;
-
- process(cpu_clk_4x, areset) -- Find phase relation between cpu_clk and cpu_clk_4x
- begin
- if areset = '1' then
- cpu_clk_4x_smp1 <= '0';
- cpu_clk_4x_smp2 <= '0';
- clk4_phase <= "0000";
- clk4_phase_short <= "00";
- elsif (cpu_clk_4x'event and cpu_clk_4x = '1') then
- cpu_clk_4x_smp1 <= cpu_clk_tog after Sim_Delay;
- cpu_clk_4x_smp2 <= cpu_clk_4x_smp1 after Sim_Delay;
- if (cpu_clk_4x_smp1 = '1' and cpu_clk_4x_smp2 = '0') then
- clk4_phase <= "0100" after Sim_Delay;
- clk4_phase_short <= "01" after Sim_Delay;
- else
- clk4_phase <= (clk4_phase(2 downto 0) & clk4_phase(3)) after Sim_Delay;
- clk4_phase_short <= clk4_phase_short(0) & clk4_phase_short(1);
- end if;
- end if;
- end process;
-
- process(cpu_clk_4x, areset) --
- begin
- if areset = '1' then
- sdr_clk <= '0';
- sdr_clk_n <= '0';
- elsif (cpu_clk_4x'event and cpu_clk_4x = '1') then
- if clk4_phase_short(0) = '1' then
- sdr_clk <= '1' after Sim_Delay;
- else
- sdr_clk <= '0' after Sim_Delay;
- end if;
- if clk4_phase_short(1) = '1' then
- sdr_clk_n <= '1' after Sim_Delay;
- else
- sdr_clk_n <= '0' after Sim_Delay;
- end if;
- end if;
- end process;
-
- cke_q_p <= '1' after Clk_to_Output;
- cs_qn_p <= '0' after Clk_to_Output;
-
- process(cpu_clk_4x, areset) --
- begin
- if areset = '1' then
- ras_qn_p <= '1';
- cas_qn_p <= '1';
- we_qn_p <= '1';
- dqs_q_p <= "ZZ";
- sdr_a_p <= "0000000000000";
- ba_q_p <= "00";
- sdr_clk_p <= '0';
- sdr_clk_n_p <= '1';
- elsif (cpu_clk_4x'event and cpu_clk_4x = '1') then
- ras_qn_p <= transport ras_qn after Clk_to_Output;
- cas_qn_p <= transport cas_qn after Clk_to_Output;
- we_qn_p <= transport we_qn after Clk_to_Output;
- if dqs_oe_n(0) = '0' then
- dqs_q_p(0) <= transport dqs_q(0) after Clk_to_Output;
- else
- dqs_q_p(0) <= transport 'Z' after Clk_to_Output;
- end if;
- if dqs_oe_n(1) = '0' then
- dqs_q_p(1) <= transport dqs_q(1) after Clk_to_Output;
- else
- dqs_q_p(1) <= transport 'Z' after Clk_to_Output;
- end if;
- sdr_a_p <= transport sdr_a after Clk_to_Output;
- ba_q_p <= transport ba_q after Clk_to_Output;
- sdr_clk_p <= transport sdr_clk after Clk_to_Output;
- sdr_clk_n_p <= transport sdr_clk_n after Clk_to_Output;
- end if;
- end process;
-
- process(cpu_clk_2x, areset) --
- begin
- if areset = '1' then
- ddr_state <= idle;
- ras_qn <= '1';
- cas_qn <= '1';
- we_qn <= '1';
- smp_req_adr <= (others => '0');
- smp_req_type <= '0';
- smp_req_len <= '0';
- sdr_a <= "XXXXXXXXXXXXX";
- ba_q <= "00";
- ddr_req_ack <= '0';
- ddr_busy <= '1';
- ddr_write_en_int <= '0';
- ddr_read_en_int <= '0';
- elsif (cpu_clk_2x'event and cpu_clk_2x = '1') then
-
- -- Default values
- ras_qn <= '1' after Sim_Delay;
- cas_qn <= '1' after Sim_Delay;
- we_qn <= '1' after Sim_Delay;
- sdr_a <= "XXXXXXXXXXXXX" after Sim_Delay;
- ba_q <= "00" after Sim_Delay;
- ddr_req_ack <= '0' after Sim_Delay;
- ddr_busy <= '1' after Sim_Delay;
- ddr_write_en_int <= '0' after Sim_Delay;
- ddr_read_en_int <= '0' after Sim_Delay;
-
- case ddr_state is
- when idle =>
- smp_req_adr <= ddr_req_adr after Sim_Delay;
- smp_req_type <= ddr_rd_wr_n after Sim_Delay;
- smp_req_len <= ddr_req_len after Sim_Delay;
- ddr_busy <= '0' after Sim_Delay;
- if refresh_pend = '1' then
- ddr_state <= refresh after Sim_Delay;
- elsif new_command = '1' then
- if ddr_cmd(15) = '1' then
- ddr_state <= cpu_pre after Sim_Delay;
- else
- ddr_state <= cmd after Sim_Delay;
- end if;
- elsif ddr_req = '1' then
- ddr_state <= act after Sim_Delay;
- else
- ddr_state <= idle after Sim_Delay;
- end if;
- when act =>
- sdr_a <= smp_req_adr(23 downto 11) after Sim_Delay;
- ras_qn <= '0' after Sim_Delay;
- ddr_state <= act_nop1 after Sim_Delay;
- ddr_req_ack <= '1' after Sim_Delay;
- ddr_write_en_int <= not(smp_req_type) after Sim_Delay;
- when act_nop1 =>
- ddr_state <= act_nop2 after Sim_Delay;
- when act_nop2 =>
- ddr_state <= rd_wr after Sim_Delay;
- when rd_wr =>
- sdr_a(10) <= '0' after Sim_Delay; -- Disable auto precharge
- sdr_a(9 downto 0) <= smp_req_adr(10 downto 1) after Sim_Delay;
- cas_qn <= '0' after Sim_Delay;
- we_qn <= smp_req_type after Sim_Delay;
- if smp_req_type = '1' then
- ddr_state <= rd_nop1 after Sim_Delay;
- else
- ddr_state <= wr_nop1 after Sim_Delay;
- end if;
- when wr_nop1 =>
- ddr_state <= wr_nop2 after Sim_Delay;
- when wr_nop2 =>
- ddr_state <= wr_nop3 after Sim_Delay;
- when wr_nop3 =>
- ddr_state <= pre after Sim_Delay;
- when rd_nop1 =>
- ddr_state <= rd_nop2 after Sim_Delay;
- when rd_nop2 =>
- ddr_state <= pre after Sim_Delay;
- when pre =>
- ras_qn <= '0' after Sim_Delay;
- we_qn <= '0' after Sim_Delay;
- sdr_a(10) <= '1' after Sim_Delay; -- Precharge all banks
- ddr_state <= pre_nop1 after Sim_Delay;
- ddr_read_en_int <= smp_req_type after Sim_Delay;
- when pre_nop1 =>
- ddr_state <= pre_nop2 after Sim_Delay;
- when cmd =>
- cas_qn <= '0' after Sim_Delay;
- ras_qn <= '0' after Sim_Delay;
- we_qn <= '0' after Sim_Delay;
- ba_q <= ddr_cmd(14 downto 13) after Sim_Delay;
- sdr_a <= ddr_cmd(12 downto 0) after Sim_Delay;
- ddr_state <= idle after Sim_Delay;
- when cpu_pre =>
- ddr_state <= pre after Sim_Delay;
- when refresh =>
- cas_qn <= '0' after Sim_Delay;
- ras_qn <= '0' after Sim_Delay;
- ddr_state <= refresh_wait after Sim_Delay;
- when refresh_wait =>
- if refresh_wait_end = '1' then
- ddr_state <= pre after Sim_Delay;
- end if;
- when pre_nop2 =>
- ddr_state <= idle after Sim_Delay;
- when others =>
- ddr_state <= idle after Sim_Delay;
- end case;
- end if;
- end process;
-
- process(cpu_clk, areset) --
- begin
- if areset = '1' then
- ddr_cmd <= "0000000000000000";
- elsif (cpu_clk'event and cpu_clk = '1') then
- if ddr_command_we = '1' then
- ddr_cmd <= ddr_command after Sim_Delay;
- else
- ddr_cmd <= ddr_cmd after Sim_Delay;
- end if;
- end if;
- end process;
-
- process(cpu_clk_2x, areset) --
- begin
- if areset = '1' then
- ddr_cmd_we_smp <= '0';
- new_command <= '0';
- sdr_smp <= "000000000000000000000000000000000000";
- elsif (cpu_clk_2x'event and cpu_clk_2x = '1') then
- ddr_cmd_we_smp <= ddr_command_we after Sim_Delay;
- if ddr_command_we = '0' and ddr_cmd_we_smp = '1' then
- new_command <= '1' after Sim_Delay;
- elsif ddr_state = cmd or ddr_state = cpu_pre then
- new_command <= '0' after Sim_Delay;
- else
- new_command <= new_command after Sim_Delay;
- end if;
-
- if ddr_write_en_int = '1' then
- sdr_smp <= ddr_data_write after Sim_Delay;
- else
- sdr_smp <= sdr_smp after Sim_Delay;
- end if;
-
- end if;
- end process;
-
- process(cpu_clk_4x, areset) --
- begin
- if areset = '1' then
- dqs_q <= "00";
- dqs_oe_n <= "11";
- sdr_oe_ctrl <= '1';
- sdr_wr_msw <= "000000000000000000";
- elsif (cpu_clk_4x'event and cpu_clk_4x = '1') then
-
- if ddr_state = wr_nop1 and clk4_phase_short(0) = '1' then
- sdr_oe_ctrl <= '0' after Sim_Delay;
- elsif ddr_state = wr_nop3 and clk4_phase_short(0) = '1' then
- sdr_oe_ctrl <= '1' after Sim_Delay;
- else
- sdr_oe_ctrl <= sdr_oe_ctrl after Sim_Delay;
- end if;
-
- if ddr_state = idle or ddr_state = wr_nop3 then
- dqs_oe_n <= "11" after Sim_Delay;
- elsif ddr_state = wr_nop1 then
- dqs_oe_n <= "00" after Sim_Delay;
- else
- dqs_oe_n <= dqs_oe_n after Sim_Delay;
- end if;
-
- if (ddr_state = wr_nop2 and clk4_phase_short(0) = '1') then
- dqs_q <= "11" after Sim_Delay;
- else
- dqs_q <= "00" after Sim_Delay;
- end if;
-
- if ddr_state = wr_nop1 and clk4_phase_short(1) = '1' then
- sdr_wr_msw <= "111111111111111111" after Sim_Delay;
- else
- sdr_wr_msw <= "000000000000000000" after Sim_Delay;
- end if;
-
- end if;
- end process;
-
- -- NOTE! DATA OUTPUT PATH. CLOCKED ON FALLING 4X CLOCK
- process(cpu_clk_4x, areset) --
- begin
- if areset = '1' then
- sdr_d_p <= "ZZZZZZZZZZZZZZZZ";
- dm_q_p <= "11";
- sdr_oe_n <= "1111111111111111";
- sdr_d <= "0000000000000000";
- dm_q <= "11";
- elsif (cpu_clk_4x'event and cpu_clk_4x = '0') then
-
- for i in 0 to 15 loop
- if sdr_oe_n(i) = '0' then
- sdr_d_p(i) <= transport sdr_d(i) after Clk_to_Output;
- else
- sdr_d_p(i) <= transport 'Z' after Clk_to_Output;
- end if;
- end loop;
-
- dm_q_p <= transport dm_q after Clk_to_Output;
-
- if sdr_oe_ctrl = '0' then
- sdr_oe_n <= "0000000000000000" after Sim_Delay;
- else
- sdr_oe_n <= "1111111111111111" after Sim_Delay;
- end if;
-
- for i in 0 to 15 loop
- if sdr_wr_msw(i) = '0' then
- sdr_d(i) <= sdr_smp(i) after Sim_Delay;
- else
- sdr_d(i) <= sdr_smp(i+16) after Sim_Delay;
- end if;
- end loop;
-
- for i in 0 to 1 loop
- if sdr_wr_msw(i+16) = '0' then
- dm_q(i) <= sdr_smp(i+32) after Sim_Delay;
- else
- dm_q(i) <= sdr_smp(i+34) after Sim_Delay;
- end if;
- end loop;
-
- end if;
- end process;
-
- process(cpu_clk_2x, areset) --
- begin
- if areset = '1' then
- refresh_cnt <= "0000000000";
- refresh_pend <= '0';
- refresh_end <= '0';
- refresh_wait_cnt <= "000";
- refresh_wait_end <= '0';
- elsif (cpu_clk_2x'event and cpu_clk_2x = '1') then
-
- if refresh_cnt = Refresh_Interval then
- refresh_end <= '1';
- else
- refresh_end <= '0';
- end if;
-
- if refresh_end = '1' then
- refresh_cnt <= "0000000000";
- else
- refresh_cnt <= refresh_cnt + '1';
- end if;
-
- if refresh_end = '1' and refresh_en = '1' then
- refresh_pend <= '1' after Sim_Delay;
- elsif ddr_state = refresh then
- refresh_pend <= '0' after Sim_Delay;
- else
- refresh_pend <= refresh_pend after Sim_Delay;
- end if;
-
- if ddr_state = refresh_wait then
- refresh_wait_cnt <= refresh_wait_cnt + '1';
- else
- refresh_wait_cnt <= "000";
- end if;
-
- if refresh_wait_cnt = "111" then
- refresh_wait_end <= '1' after Sim_Delay;
- else
- refresh_wait_end <= '0' after Sim_Delay;
- end if;
-
- end if;
- end process;
-
- -- 911. THIS IS A DUMMY FOR FGPA IMPEMENTATION TESTING
-
- process(ddr_in_clk, areset)
- begin
- if areset = '1' then
- ddr_clk_tog <= '0';
- elsif (ddr_in_clk'event and ddr_in_clk = '1') then
- ddr_clk_tog <= not(ddr_clk_tog) after Sim_Delay;
- end if;
- end process;
-
- process(ddr_in_clk_2x, areset)
- begin
- if areset = '1' then
- ddr_clk_smp1 <= '0';
- ddr_clk_smp2 <= '0';
- ddr_clk_phase <= '0';
- elsif (ddr_in_clk_2x'event and ddr_in_clk_2x = '1') then
- ddr_clk_smp1 <= ddr_clk_tog after Sim_Delay;
- ddr_clk_smp2 <= ddr_clk_smp1 after Sim_Delay;
- if ddr_clk_smp1 = '1' and ddr_clk_smp2 = '0' then
- ddr_clk_phase <= '0';
- else
- ddr_clk_phase <= not(ddr_clk_phase);
- end if;
- end if;
- end process;
-
- process(ddr_in_clk_2x, areset)
- begin
- if areset = '1' then
- cas_n_smp <= '0';
- ras_n_smp <= '0';
- we_n_smp <= '0';
- read_start_sig <= '0';
- elsif (ddr_in_clk_2x'event and ddr_in_clk_2x = '1') then
- cas_n_smp <= cas_qn_p_del after Sim_Delay;
- ras_n_smp <= ras_qn_p_del after Sim_Delay;
- we_n_smp <= we_qn_p_del after Sim_Delay;
- if ras_n_smp = '1' and cas_n_smp = '0' and we_n_smp = '1' and ddr_clk_phase = '1' then
- read_start_sig <= '1' after Sim_Delay;
- else
- read_start_sig <= '0' after Sim_Delay;
- end if;
- end if;
- end process;
-
- process(ddr_in_clk_2x, areset)
- begin
- if areset = '1' then
- sdr_d_in <= "0000000000000000";
- elsif (ddr_in_clk_2x'event and ddr_in_clk_2x = '1') then
- sdr_d_in <= sdr_d_p_del after Sim_Delay;
- end if;
- end process;
-
- process(ddr_in_clk_2x, areset)
- begin
- if areset = '1' then
- read_time_cnt <= "00";
- read_input_en <= '0';
- elsif (ddr_in_clk_2x'event and ddr_in_clk_2x = '1') then
-
- if read_start_sig = '1' then
- read_time_cnt <= "01" after Sim_Delay;
- elsif read_time_cnt = "00" then
- read_time_cnt <= read_time_cnt after Sim_Delay;
- else
- read_time_cnt <= read_time_cnt + '1' after Sim_Delay;
- end if;
-
- if read_time_cnt = "11" then
- read_input_en <= '1' after Sim_Delay;
- else
- read_input_en <= '0' after Sim_Delay;
- end if;
-
- end if;
- end process;
-
- process(ddr_in_clk_2x, areset)
- begin
- if areset = '1' then
- ddr_data_read_int <= "00000000000000000000000000000000";
- elsif (ddr_in_clk_2x'event and ddr_in_clk_2x = '1') then
- ddr_data_read_int(31 downto 16) <= "0000000000000000" after Sim_Delay;
- if read_input_en = '1' then
- ddr_data_read_int(15 downto 0) <= sdr_d_in after Sim_Delay;
- else
- ddr_data_read_int(15 downto 0) <= ddr_data_read_int(15 downto 0) after Sim_Delay;
- end if;
- end if;
- end process;
-
-
-
-
-
-
-
-
- -- ###############
-
- process(cpu_clk, areset) --
- begin
- if areset = '1' then
- elsif (cpu_clk'event and cpu_clk = '1') then
- end if;
- end process;
-
-
- process(cpu_clk_2x, areset) --
- begin
- if areset = '1' then
- elsif (cpu_clk_2x'event and cpu_clk_2x = '1') then
- end if;
- end process;
-
-
- process(cpu_clk_4x, areset) --
- begin
- if areset = '1' then
- elsif (cpu_clk_4x'event and cpu_clk_4x = '1') then
- end if;
- end process;
-
-
-end behave;
-
-
|
