clean up

9 files changed, 0 insertions, 622 deletions

diff --git a/uc_str912/prj_main_add/prj/eclipse_ram.gdb b/uc_str912/prj_main_add/prj/eclipse_ram.gdb
deleted file mode 100644
index 0c72df4..0000000
--- a/uc_str912/prj_main_add/prj/eclipse_ram.gdb
+++ /dev/null
@@ -1,24 +0,0 @@
-target remote localhost:3333

-monitor reset

-monitor sleep 500

-monitor poll

-monitor soft_reset_halt

-monitor arm7_9 sw_bkpts enable

-

-# Set SRAM size to 96 KB

-monitor mww 0x5C002034 0x0197

-monitor mdw 0x5C002034

-

-# Set Flash, Bank0 size to 512 KB

-monitor mww 0x54000000 0xf

-

-# needed for gdb 6.8 and higher

-set mem inaccessible-by-default off

-

-load

-break main

-continue

-

-

-

-

diff --git a/uc_str912/prj_main_add/prj/eclipse_rom.gdb b/uc_str912/prj_main_add/prj/eclipse_rom.gdb
deleted file mode 100644
index 3baf4fe..0000000
--- a/uc_str912/prj_main_add/prj/eclipse_rom.gdb
+++ /dev/null
@@ -1,24 +0,0 @@
-target remote localhost:3333

-monitor reset

-monitor sleep 500

-monitor poll

-monitor soft_reset_halt

-monitor arm7_9 force_hw_bkpts enable

-

-# Set SRAM size to 96 KB

-monitor mww 0x5C002034 0x0197

-monitor mdw 0x5C002034

-

-# Set Flash, Bank0 size to 512 KB

-monitor mww 0x54000000 0xf

-

-# needed for gdb 6.8 and higher

-set mem inaccessible-by-default off

-

-load

-break main

-continue

-

-

-

-

diff --git a/uc_str912/prj_main_add/prj/jtagkey.cfg b/uc_str912/prj_main_add/prj/jtagkey.cfg
deleted file mode 100644
index 4a25c96..0000000
--- a/uc_str912/prj_main_add/prj/jtagkey.cfg
+++ /dev/null
@@ -1,59 +0,0 @@
-# daemon configuration

-telnet_port 4444

-gdb_port 3333

-

-# tell gdb our flash memory map

-# and enable flash programming

-gdb_memory_map enable

-gdb_flash_program enable

-

-#

-# interface, if you want to use an other interface

-# you must replace this section here

-#

-#################### interface start ####################

-

-interface ft2232

-ft2232_device_desc "Amontec JTAGkey A"

-ft2232_layout jtagkey

-ft2232_vid_pid 0x0403 0xcff8

-

-##################### interface end #####################

-

-# jtag speed

-# start slow, speed up after reset

-jtag_khz 16 2000

-

-#delays on reset lines

-jtag_nsrst_delay 100

-jtag_ntrst_delay 100

-

-#use combined on interfaces or targets that can't set TRST/SRST separately

-reset_config trst_and_srst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 8 0x1 0x1 0xfe

-jtag_device 4 0x1 0xf 0xe

-jtag_device 5 0x1 0x1 0x1e

-

-#target configuration

-daemon_startup reset

-

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target arm966e little reset_halt 1 arm966e

-run_and_halt_time 0 30

-

-target_script 0 reset ./prj/str912_reset.script

-

-target_script 0 gdb_program_config ./prj/str912_program.script

-

-working_area 0 0x50000000 16384 nobackup

-

-#flash bank str9x <base> <size> 0 0 <target#> <variant>

-flash bank str9x 0x00000000 0x00080000 0 0 0

-flash bank str9x 0x00080000 0x00008000 0 0 0

-

-# For more information about the configuration files, take a 

-# look at the "Open On-Chip Debugger (openocd)" documentation.

diff --git a/uc_str912/prj_main_add/prj/str912_program.script b/uc_str912/prj_main_add/prj/str912_program.script
deleted file mode 100644
index 9f88149..0000000
--- a/uc_str912/prj_main_add/prj/str912_program.script
+++ /dev/null
@@ -1,2 +0,0 @@
-str9x flash_config 0 4 2 0 0x80000

-flash protect 0 0 7 off

diff --git a/uc_str912/prj_main_add/prj/str912_ram.gdb b/uc_str912/prj_main_add/prj/str912_ram.gdb
deleted file mode 100644
index 892f14b..0000000
--- a/uc_str912/prj_main_add/prj/str912_ram.gdb
+++ /dev/null
@@ -1,22 +0,0 @@
-target remote localhost:3333

-monitor reset

-monitor sleep 500

-monitor poll

-monitor soft_reset_halt

-monitor arm7_9 sw_bkpts enable

-

-# Set SRAM size to 96 KB

-monitor mww 0x5C002034 0x0197

-monitor mdw 0x5C002034

-

-# needed for gdb 6.8 and higher

-set mem inaccessible-by-default off

-

-load

-break main

-continue

-

-

-

-

-

diff --git a/uc_str912/prj_main_add/prj/str912_ram.ld b/uc_str912/prj_main_add/prj/str912_ram.ld
deleted file mode 100644
index 0974b39..0000000
--- a/uc_str912/prj_main_add/prj/str912_ram.ld
+++ /dev/null
@@ -1,218 +0,0 @@
-/***********************************************************************************

-*	Copyright 2005 Anglia Design

-*	This demo code and associated components are provided as is and has no warranty,

-*	implied or otherwise.  You are free to use/modify any of the provided

-*	code at your own risk in your applications with the expressed limitation

-*	of liability (see below)

-* 

-*	LIMITATION OF LIABILITY:   ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY

-*	LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR

-*	INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER

-*	THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

-*

-*	Author			: Spencer Oliver

-*	Web     		: www.anglia-designs.com

-*

-***********************************************************************************/

-

-/* Stack Sizes */

-

-	_STACKSIZE     = 1024;

-	_STACKSIZE_IRQ = 256;

-	_STACKSIZE_FIQ = 0;

-	_STACKSIZE_SVC = 1024;

-	_STACKSIZE_ABT = 0;

-	_STACKSIZE_UND = 0;

-	_HEAPSIZE      = 1024;

-

-/* Memory Definitions */

-

-MEMORY

-{

-	DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000

-}

-

-/* Section Definitions */

-

-SECTIONS

-{

-	/* first section is .text which is used for code */

-

-	.text :

-	{

-		KEEP(*(.vectors))

-		KEEP(*(.init))

-		*(.text .text.*)

-		*(.gnu.linkonce.t.*)

-		*(.glue_7t .glue_7)

-		KEEP(*(.fini))

-		*(.gcc_except_table)

-	} >DATA =0

-	. = ALIGN(4);

-

-	/* .ctors .dtors are used for c++ constructors/destructors */

-	

-	.ctors :

-	{

-		PROVIDE(__ctors_start__ = .);

-		KEEP(*(SORT(.ctors.*)))

-		KEEP(*(.ctors))

-		PROVIDE(__ctors_end__ = .);

-	} >DATA

-

-	.dtors :

-	{

-		PROVIDE(__dtors_start__ = .); 

-		KEEP(*(SORT(.dtors.*)))

-		KEEP(*(.dtors))

-		PROVIDE(__dtors_end__ = .);

-	} >DATA

-	

-	/* .rodata section which is used for read-only data (constants) */

-

-	.rodata :

-	{

-		*(.rodata .rodata.*)

-		*(.gnu.linkonce.r.*)

-	} >DATA

-	. = ALIGN(4);

-

-	_etext = .;

-	PROVIDE (etext = .);

-

-	/* .data section which is used for initialized data */

-

-	.data : AT (_etext)

-	{

-		*(.data .data.*)

-		*(.gnu.linkonce.d.*)

-		SORT(CONSTRUCTORS)

-	} >DATA

-	. = ALIGN(4);

-	

-	__data_start = .;

-	_edata = .;

-	PROVIDE (edata = .);

-

-	/* .bss section which is used for uninitialized data */

-

-	.bss :

-	{

-		__bss_start = .;

-		__bss_start__ = .;

-		*(.bss .bss.*)

-		*(.gnu.linkonce.b.*)

-		*(COMMON)

-		. = ALIGN(4);

-	} >DATA

-	. = ALIGN(4);

-	__bss_end__ = .;

-	

-	_end = .;

-	PROVIDE(end = .);

-

-	/* .heap section which is used for memory allocation */

-	

-	.heap (NOLOAD) :

-	{

-		__heap_start__ = .;

-		*(.heap)

-		. = MAX(__heap_start__ + _HEAPSIZE , .);

-	} >DATA

-	__heap_end__ = __heap_start__ + SIZEOF(.heap);

-	

-	/* .stack section - user mode stack */

-	

-	.stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_start__ = .;

-		*(.stack)

-		. = MAX(__stack_start__ + _STACKSIZE , .);

-	} >DATA

-	__stack_end__ = __stack_start__ + SIZEOF(.stack);

-

-	/* .stack_irq section */

-	

-	.stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_irq_start__ = .;

-		*(.stack_irq)

-		. = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);

-	} >DATA

-	__stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);

-

-	/* .stack_fiq section */

-	

-	.stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_fiq_start__ = .;

-		*(.stack_fiq)

-	    . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);

-	} >DATA

-	__stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);

-

-	/* .stack_svc section */

-	

-	.stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_svc_start__ = .;

-		*(.stack_svc)

-		. = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);

-	} >DATA

-	__stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);

-

-	/* .stack_abt section */

-	

-	.stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_abt_start__ = .;

-		*(.stack_abt)

-		. = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);

-	} >DATA

-	__stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);

-

-	/* .stack_und section */

-	

-	.stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_und_start__ = .;

-		*(.stack_und)

-    	. = MAX(__stack_und_start__ + _STACKSIZE_UND , .);

-	} >DATA

-	__stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);

-	

-	/* Stabs debugging sections.  */

-	.stab          0 : { *(.stab) }

-	.stabstr       0 : { *(.stabstr) }

-	.stab.excl     0 : { *(.stab.excl) }

-	.stab.exclstr  0 : { *(.stab.exclstr) }

-	.stab.index    0 : { *(.stab.index) }

-	.stab.indexstr 0 : { *(.stab.indexstr) }

-	.comment       0 : { *(.comment) }

-	/* DWARF debug sections.

-		Symbols in the DWARF debugging sections are relative to the beginning

-		of the section so we begin them at 0.  */

-	/* DWARF 1 */

-	.debug          0 : { *(.debug) }

-	.line           0 : { *(.line) }

-	/* GNU DWARF 1 extensions */

-	.debug_srcinfo  0 : { *(.debug_srcinfo) }

-	.debug_sfnames  0 : { *(.debug_sfnames) }

-	/* DWARF 1.1 and DWARF 2 */

-	.debug_aranges  0 : { *(.debug_aranges) }

-	.debug_pubnames 0 : { *(.debug_pubnames) }

-	/* DWARF 2 */

-	.debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }

-	.debug_abbrev   0 : { *(.debug_abbrev) }

-	.debug_line     0 : { *(.debug_line) }

-	.debug_frame    0 : { *(.debug_frame) }

-	.debug_str      0 : { *(.debug_str) }

-	.debug_loc      0 : { *(.debug_loc) }

-	.debug_macinfo  0 : { *(.debug_macinfo) }

-	/* SGI/MIPS DWARF 2 extensions */

-	.debug_weaknames 0 : { *(.debug_weaknames) }

-	.debug_funcnames 0 : { *(.debug_funcnames) }

-	.debug_typenames 0 : { *(.debug_typenames) }

-	.debug_varnames  0 : { *(.debug_varnames) }	

-}

-

diff --git a/uc_str912/prj_main_add/prj/str912_reset.script b/uc_str912/prj_main_add/prj/str912_reset.script
deleted file mode 100644
index 8c222a8..0000000
--- a/uc_str912/prj_main_add/prj/str912_reset.script
+++ /dev/null
@@ -1,2 +0,0 @@
-# -- Enable 96K RAM */

-mww 0x5C002034, 0x0191 # PFQBC enabled / DTCM & AHB wait-states disabled

diff --git a/uc_str912/prj_main_add/prj/str912_rom.gdb b/uc_str912/prj_main_add/prj/str912_rom.gdb
deleted file mode 100644
index 4b2649c..0000000
--- a/uc_str912/prj_main_add/prj/str912_rom.gdb
+++ /dev/null
@@ -1,22 +0,0 @@
-target remote localhost:3333

-monitor reset

-monitor sleep 500

-monitor poll

-monitor soft_reset_halt

-monitor arm7_9 force_hw_bkpts enable

-

-# Set SRAM size to 96 KB

-monitor mww 0x5C002034 0x0197

-monitor mdw 0x5C002034

-

-# needed for gdb 6.8 and higher

-set mem inaccessible-by-default off

-

-load

-break main

-continue

-

-

-

-

-

diff --git a/uc_str912/prj_main_add/prj/str912_rom.ld b/uc_str912/prj_main_add/prj/str912_rom.ld
deleted file mode 100644
index 8cbb7f7..0000000
--- a/uc_str912/prj_main_add/prj/str912_rom.ld
+++ /dev/null
@@ -1,249 +0,0 @@
-/***********************************************************************************

-*	Copyright 2005 Anglia Design

-*	This demo code and associated components are provided as is and has no warranty,

-*	implied or otherwise.  You are free to use/modify any of the provided

-*	code at your own risk in your applications with the expressed limitation

-*	of liability (see below)

-* 

-*	LIMITATION OF LIABILITY:   ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY

-*	LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR

-*	INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER

-*	THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

-*

-*	Author			: Spencer Oliver

-*	Web     		: www.anglia-designs.com

-*

-***********************************************************************************/

-

-/* Stack Sizes */

-

-	_STACKSIZE     = 1024;

-	_STACKSIZE_IRQ = 256;

-	_STACKSIZE_FIQ = 0;

-	_STACKSIZE_SVC = 1024;

-	_STACKSIZE_ABT = 0;

-	_STACKSIZE_UND = 0;

-	_HEAPSIZE      = 1024;

-

-/* Memory Definitions */

-

-MEMORY

-{

-	CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000

-	DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000

-}

-

-/* Section Definitions */

-

-SECTIONS

-{

-	/* first section is .text which is used for code */

-

-	.text :

-	{

-		CREATE_OBJECT_SYMBOLS

-		KEEP(*(.vectors))

-		KEEP(*(.init))

-		*(.text .text.*)

-		*(.gnu.linkonce.t.*)

-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)

-		KEEP(*(.fini))

-		*(.gcc_except_table)

-	} >CODE =0

-	. = ALIGN(4);

-

-	/* .ctors .dtors are used for c++ constructors/destructors */

-	

-	.ctors :

-	{

-		PROVIDE(__ctors_start__ = .);

-		KEEP(*(SORT(.ctors.*)))

-		KEEP(*(.ctors))

-		PROVIDE(__ctors_end__ = .);

-	} >CODE

-

-	.dtors :

-	{

-		PROVIDE(__dtors_start__ = .); 

-		KEEP(*(SORT(.dtors.*)))

-		KEEP(*(.dtors))

-		PROVIDE(__dtors_end__ = .);

-	} >CODE

-	

-	/* .rodata section which is used for read-only data (constants) */

-

-	.rodata :

-	{

-		*(.rodata .rodata.*)

-		*(.gnu.linkonce.r.*)

-	} >CODE

-	. = ALIGN(4);

-

-	.init_array :

-	{

-		*(.init)

-        *(.fini)

-		PROVIDE_HIDDEN (__preinit_array_start = .);

-		KEEP (*(.preinit_array))

-		PROVIDE_HIDDEN (__preinit_array_end = .);

-		PROVIDE_HIDDEN (__init_array_start = .);

-		KEEP (*(SORT(.init_array.*)))

-		KEEP (*(.init_array))

-		PROVIDE_HIDDEN (__init_array_end = .);

-		PROVIDE_HIDDEN (__fini_array_start = .);

-		KEEP (*(.fini_array))

-		KEEP (*(SORT(.fini_array.*)))

-		PROVIDE_HIDDEN (__fini_array_end = .);

-	} >CODE

-

-	. = ALIGN(4);

-

-	/* .ARM.exidx is sorted, so has to go in its own output section.  */

-	__exidx_start = .;

-	.ARM.exidx :

-	{

-		*(.ARM.exidx* .gnu.linkonce.armexidx.*)

-	} >CODE

-	__exidx_end = .;

-

-	_etext = .;

-	PROVIDE (etext = .);

-

-	/* .data section which is used for initialized data */

-

-	.data : AT (_etext)

-	{

-		__data_start = .;

-		*(.data .data.*)

-		*(.gnu.linkonce.d.*)

-		SORT(CONSTRUCTORS)

-		. = ALIGN(4);

-		*(.fastrun .fastrun.*)

-	} >DATA

-	. = ALIGN(4);

-	

-	_edata = .;

-	PROVIDE (edata = .);

-

-	/* .bss section which is used for uninitialized data */

-

-	.bss :

-	{

-		__bss_start = .;

-		__bss_start__ = .;

-		*(.bss .bss.*)

-		*(.gnu.linkonce.b.*)

-		*(COMMON)

-		. = ALIGN(4);

-	} >DATA

-	. = ALIGN(4);

-	__bss_end__ = .;

-	

-	_end = .;

-	PROVIDE(end = .);

-

-	/* .heap section which is used for memory allocation */

-	

-	.heap (NOLOAD) :

-	{

-		__heap_start__ = .;

-		*(.heap)

-		. = MAX(__heap_start__ + _HEAPSIZE , .);

-	} >DATA

-	__heap_end__ = __heap_start__ + SIZEOF(.heap);

-	

-	/* .stack section - user mode stack */

-	

-	.stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_start__ = .;

-		*(.stack)

-		. = MAX(__stack_start__ + _STACKSIZE , .);

-	} >DATA

-	__stack_end__ = __stack_start__ + SIZEOF(.stack);

-

-	/* .stack_irq section */

-	

-	.stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_irq_start__ = .;

-		*(.stack_irq)

-		. = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);

-	} >DATA

-	__stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);

-

-	/* .stack_fiq section */

-	

-	.stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_fiq_start__ = .;

-		*(.stack_fiq)

-	    . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);

-	} >DATA

-	__stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);

-

-	/* .stack_svc section */

-	

-	.stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_svc_start__ = .;

-		*(.stack_svc)

-		. = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);

-	} >DATA

-	__stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);

-

-	/* .stack_abt section */

-	

-	.stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_abt_start__ = .;

-		*(.stack_abt)

-		. = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);

-	} >DATA

-	__stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);

-

-	/* .stack_und section */

-	

-	.stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :

-	{

-		__stack_und_start__ = .;

-		*(.stack_und)

-    	. = MAX(__stack_und_start__ + _STACKSIZE_UND , .);

-	} >DATA

-	__stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);

-  

-	/* Stabs debugging sections.  */

-	.stab          0 : { *(.stab) }

-	.stabstr       0 : { *(.stabstr) }

-	.stab.excl     0 : { *(.stab.excl) }

-	.stab.exclstr  0 : { *(.stab.exclstr) }

-	.stab.index    0 : { *(.stab.index) }

-	.stab.indexstr 0 : { *(.stab.indexstr) }

-	.comment       0 : { *(.comment) }

-	/* DWARF debug sections.

-		Symbols in the DWARF debugging sections are relative to the beginning

-		of the section so we begin them at 0.  */

-	/* DWARF 1 */

-	.debug          0 : { *(.debug) }

-	.line           0 : { *(.line) }

-	/* GNU DWARF 1 extensions */

-	.debug_srcinfo  0 : { *(.debug_srcinfo) }

-	.debug_sfnames  0 : { *(.debug_sfnames) }

-	/* DWARF 1.1 and DWARF 2 */

-	.debug_aranges  0 : { *(.debug_aranges) }

-	.debug_pubnames 0 : { *(.debug_pubnames) }

-	/* DWARF 2 */

-	.debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }

-	.debug_abbrev   0 : { *(.debug_abbrev) }

-	.debug_line     0 : { *(.debug_line) }

-	.debug_frame    0 : { *(.debug_frame) }

-	.debug_str      0 : { *(.debug_str) }

-	.debug_loc      0 : { *(.debug_loc) }

-	.debug_macinfo  0 : { *(.debug_macinfo) }

-	/* SGI/MIPS DWARF 2 extensions */

-	.debug_weaknames 0 : { *(.debug_weaknames) }

-	.debug_funcnames 0 : { *(.debug_funcnames) }

-	.debug_typenames 0 : { *(.debug_typenames) }

-	.debug_varnames  0 : { *(.debug_varnames) }	

-}

-