clean up

1 files changed, 0 insertions, 173 deletions

diff --git a/uc_str912/prj_blinky_complex_startup/main.c b/uc_str912/prj_blinky_complex_startup/main.c
deleted file mode 100644
index 067323d..0000000
--- a/uc_str912/prj_blinky_complex_startup/main.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/********************************************************************

- * Project:    STR9-comStick GNU (UART on Interrupt)

- * File:       main.c

- *

- * System:     ARM9TDMI 32 Bit (STR912FW44X)

- * Compiler:   GCC 4.0.3

- *

- * Date:       2006-12-20

- * Author:     Applications@Hitex.de

- *

- * Rights:     Hitex Development Tools GmbH

- *             Greschbachstr. 12

- *             D-76229 Karlsruhe

- ********************************************************************

- * Description:

- *

- * This file is part of the GNU Example chain for STR9-comStick

- * The code is bassed on usage of the STmicro library functions

- * This is a small implementation of UART1 feature with command interface

- * The application runs in ARM mode with high optimization level.

- *

- ********************************************************************

- * History:

- *

- *    Revision 1.0    2006/12/20      Gn

- *    Initial revision

- ********************************************************************

- * This is a preliminary version.

- *

- * WARRANTY:  HITEX warrants that the media on which the SOFTWARE is

- * furnished is free from defects in materials and workmanship under

- * normal use and service for a period of ninety (90) days. HITEX entire

- * liability and your exclusive remedy shall be the replacement of the

- * SOFTWARE if the media is defective. This Warranty is void if failure

- * of the media resulted from unauthorized modification, accident, abuse,

- * or misapplication.

- *

- * DISCLAIMER:  OTHER THAN THE ABOVE WARRANTY, THE SOFTWARE IS FURNISHED

- * "AS IS" WITHOUT WARRANTY OF ANY KIND. HITEX DISCLAIMS ALL OTHER WARRANTIES,

- * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES

- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

- *

- * NEITHER HITEX NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY DAMAGES ARISING

- * OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, INCLUDING DAMAGES FOR

- * LOSS OF PROFITS, BUSINESS INTERRUPTION, OR ANY SPECIAL, INCIDENTAL, INDIRECT

- * OR CONSEQUENTIAL DAMAGES EVEN IF HITEX HAS BEEN ADVISED OF THE POSSIBILITY

- * OF SUCH DAMAGES.

- ********************************************************************/

-

-#include "defines.h"

-

-#define global extern   /* to declare external variables and functions      */

-#include "91x_lib.h"

-

-#include "main.h"

-

-extern void          _enableInterrupts(void);

-

-

-   GPIO_InitTypeDef  GPIO_InitStructure;

-

-

-/* Private function prototypes -----------------------------------------------*/

-   void SCU_Configuration(void);

-   void GPIO_Configuration(void);

-   void VIC_Configuration(void);

-   static void Delay(u32 nCount);

-

-int main (void)

-{

-

-   /* Configure the system clocks */

-   SCU_Configuration();

-   /* Configure the GPIOs */

-   GPIO_Configuration();

-   /* VIC setup */

-   VIC_Configuration();

-

-

-   /* endless loop */

-   while (1)

-   {

-      /* Turn ON leds connected to P8.0 pins */

-      GPIO_WriteBit(GPIO8, GPIO_Pin_0, Bit_SET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_1, Bit_SET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_2, Bit_SET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_3, Bit_SET);

-

-      /* Insert delay */

-      Delay(0x1FFFFF);

-

-      /* Turn OFF leds connected to 88.0 pins */

-      GPIO_WriteBit(GPIO8, GPIO_Pin_0, Bit_RESET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_1, Bit_RESET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_2, Bit_RESET);

-      GPIO_WriteBit(GPIO8, GPIO_Pin_3, Bit_RESET);

-

-      /* Insert delay */

-      Delay(0x1FFFFF);

-   }

-}

-

-void SCU_Configuration(void)

-{

-

-// FMI_BankRemapConfig(4, 2, 0x00000000, 0x80000); /* Set Flash banks size & address */

-   FMI_Config(FMI_READ_WAIT_STATE_2, FMI_WRITE_WAIT_STATE_0, FMI_PWD_ENABLE,\

-               FMI_LVD_ENABLE, FMI_FREQ_HIGH); /* FMI Waite States */

-

-   SCU_MCLKSourceConfig(SCU_MCLK_OSC);

-

-   SCU_PLLFactorsConfig(192,25,2);            /* PLL = 96 MHz */

-   SCU_PLLCmd(ENABLE);                        /* PLL Enabled  */

-

-   SCU_RCLKDivisorConfig(SCU_RCLK_Div1);    /* RCLK @96Mhz */

-   SCU_HCLKDivisorConfig(SCU_HCLK_Div1);    /* AHB  @96Mhz */

-   SCU_FMICLKDivisorConfig(SCU_FMICLK_Div1);/* FMI  @96Mhz */

-   SCU_PCLKDivisorConfig(SCU_PCLK_Div2);    /* APB  @48Mhz */

-   SCU_MCLKSourceConfig(SCU_MCLK_PLL);      /* MCLK @96Mhz */

-

-   /* Set the PCLK Clock to MCLK/2 */

-   SCU_PCLKDivisorConfig(SCU_PCLK_Div2);

-

-   /* Enable VIC clock */

-   SCU_APBPeriphClockConfig(__VIC, ENABLE);

-   SCU_APBPeriphReset(__VIC, DISABLE);

-

-   /* Enable the GPIO8 Clock */

-   SCU_APBPeriphClockConfig(__GPIO8, ENABLE);

- 

-   /* Enable the clock for the GPIO3 */

-   SCU_APBPeriphClockConfig(__GPIO3, ENABLE);

-

-}

-

-/* GPIO Configuration --------------------------------------------------------*/

-void GPIO_Configuration(void)

-{

-   GPIO_DeInit(GPIO8);

-   GPIO_DeInit(GPIO3);                         /* GPIO3 Deinitialization */

-   /* LED */

-   GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput;

-   GPIO_InitStructure.GPIO_Pin       = GPIO_Pin_All;

-   GPIO_InitStructure.GPIO_Type      = GPIO_Type_PushPull ;

-   GPIO_Init (GPIO8, &GPIO_InitStructure);

-   /* button */

-   GPIO_InitStructure.GPIO_Direction = GPIO_PinInput;

-   GPIO_InitStructure.GPIO_Pin       = GPIO_Pin_0;

-   GPIO_InitStructure.GPIO_Type      = GPIO_Type_PushPull ;

-   GPIO_Init (GPIO3, &GPIO_InitStructure);

-

-}

-

-void VIC_Configuration(void)

-{

-   /* reset to default state */

-   VIC_DeInit();

-}

-

-/*******************************************************************************

-* Function Name  : Delay

-* Description    : Inserts a delay time.

-* Input          : nCount: specifies the delay time length.

-*******************************************************************************/

-static void Delay(u32 nCount)

-{

-   u32 j = 0;

-

-   for(j = nCount; j > 0; j--)

-      asm("nop");   

-}

-/************************************** EOF *********************************/

-