diff options
Diffstat (limited to 'xmrstak/config.tpl')
| -rw-r--r-- | xmrstak/config.tpl | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/xmrstak/config.tpl b/xmrstak/config.tpl new file mode 100644 index 0000000..60d85cd --- /dev/null +++ b/xmrstak/config.tpl @@ -0,0 +1,161 @@ +R"===( +/* + * pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported. + * wallet_address - Your wallet, or pool login. + * pool_password - Can be empty in most cases or "x". + * + * We feature pools up to 1MH/s. For a more complete list see M5M400's pool list at www.moneropools.com + */ +"pool_address" : "POOLURL", +"wallet_address" : "POOLUSER", +"pool_password" : "POOLPASSWD", + +/* + * Network timeouts. + * Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make + * sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for + * nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable - + * long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the + * server usually takes to process our calls. + * + * call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection. + * retry_time - How long should we wait before another connection attempt. + * Both values are in seconds. + * giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners + * don't mine while the connection is lost, so your computer's power usage goes down to idle. + */ +"call_timeout" : 10, +"retry_time" : 10, +"giveup_limit" : 0, + +/* + * Output control. + * Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal + * really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal + * performance monitors, there is very little reason to spew out pages of text instead of concise reports. + * Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports. + * + * verbose_level - 0 - Don't print anything. + * 1 - Print intro, connection event, disconnect event + * 2 - All of level 1, and new job (block) event if the difficulty is different from the last job + * 3 - All of level 1, and new job (block) event in all cases, result submission event. + * 4 - All of level 3, and automatic hashrate report printing + */ +"verbose_level" : 3, + +/* + * Automatic hashrate report + * + * h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4. + * This option has no effect if verbose_level is not 4. + */ +"h_print_time" : 60, + +/* + * Manual hardware AES override + * + * Some VMs don't report AES capability correctly. You can set this value to true to enforce hardware AES or + * to false to force disable AES or null to let the miner decide if AES is used. + * + * WARNING: setting this to true on a CPU that doesn't support hardware AES will crash the miner. + */ +"aes_override" : null, + +/* + * LARGE PAGE SUPPORT + * Large pages need a properly set up OS. It can be difficult if you are not used to systems administration, + * but the performance results are worth the trouble - you will get around 20% boost. Slow memory mode is + * meant as a backup, you won't get stellar results there. If you are running into trouble, especially + * on Windows, please read the common issues in the README. + * + * By default we will try to allocate large pages. This means you need to "Run As Administrator" on Windows. + * You need to edit your system's group policies to enable locking large pages. Here are the steps from MSDN + * + * 1. On the Start menu, click Run. In the Open box, type gpedit.msc. + * 2. On the Local Group Policy Editor console, expand Computer Configuration, and then expand Windows Settings. + * 3. Expand Security Settings, and then expand Local Policies. + * 4. Select the User Rights Assignment folder. + * 5. The policies will be displayed in the details pane. + * 6. In the pane, double-click Lock pages in memory. + * 7. In the Local Security Setting – Lock pages in memory dialog box, click Add User or Group. + * 8. In the Select Users, Service Accounts, or Groups dialog box, add an account that you will run the miner on + * 9. Reboot for change to take effect. + * + * Windows also tends to fragment memory a lot. If you are running on a system with 4-8GB of RAM you might need + * to switch off all the auto-start applications and reboot to have a large enough chunk of contiguous memory. + * + * On Linux you will need to configure large page support "sudo sysctl -w vm.nr_hugepages=128" and increase your + * ulimit -l. To do do this you need to add following lines to /etc/security/limits.conf - "* soft memlock 262144" + * and "* hard memlock 262144". You can also do it Windows-style and simply run-as-root, but this is NOT + * recommended for security reasons. + * + * Memory locking means that the kernel can't swap out the page to disk - something that is unlikely to happen on a + * command line system that isn't starved of memory. I haven't observed any difference on a CLI Linux system between + * locked and unlocked memory. If that is your setup see option "no_mlck". + */ + +/* + * use_slow_memory defines our behavior with regards to large pages. There are three possible options here: + * always - Don't even try to use large pages. Always use slow memory. + * warn - We will try to use large pages, but fall back to slow memory if that fails. + * no_mlck - This option is only relevant on Linux, where we can use large pages without locking memory. + * It will never use slow memory, but it won't attempt to mlock + * never - If we fail to allocate large pages we will print an error and exit. + */ +"use_slow_memory" : "warn", + +/* + * NiceHash mode + * nicehash_nonce - Limit the nonce to 3 bytes as required by nicehash. This cuts all the safety margins, and + * if a block isn't found within 30 minutes then you might run into nonce collisions. Number + * of threads in this mode is hard-limited to 32. + */ +"nicehash_nonce" : false, + +/* + * TLS Settings + * If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption + * to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel. + * + * use_tls - This option will make us connect using Transport Layer Security. + * tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo. + * tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it. + */ +"use_tls" : false, +"tls_secure_algo" : true, +"tls_fingerprint" : "", + +/* + * Daemon mode + * + * If you are running the process in the background and you don't need the keyboard reports, set this to true. + * This should solve the hashrate problems on some emulated terminals. + */ +"daemon_mode" : false, + +/* + * Output file + * + * output_file - This option will log all output to a file. + * + */ +"output_file" : "", + +/* + * Built-in web server + * I like checking my hashrate on my phone. Don't you? + * Keep in mind that you will need to set up port forwarding on your router if you want to access it from + * outside of your home network. Ports lower than 1024 on Linux systems will require root. + * + * httpd_port - Port we should listen on. Default, 0, will switch off the server. + */ +"httpd_port" : 0, + +/* + * prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose? + * This setting will only be needed in 2020's. No need to worry about it now. + */ +"prefer_ipv4" : true, + +)===" +
\ No newline at end of file |
