7 files changed, 58 insertions, 19 deletions
diff --git a/doc/FAQ.md b/doc/FAQ.md
index 23507f2..641a50d 100644
--- a/doc/FAQ.md
+++ b/doc/FAQ.md
@@ -1,7 +1,7 @@
 # FAQ
 
 ## Content Overview
-* [SeLockMemoryPrivilege failed](#selockmemoryprivilege-failed)
+* ["Obtaining SeLockMemoryPrivilege failed."](#obtaining-selockmemoryprivilege-failed)
 * [VirtualAlloc failed](#virtualalloc-failed)
 * [Error msvcp140.dll and vcruntime140.dll not available](#error-msvcp140dll-and-vcruntime140dll-not-available)
 * [Error: MEMORY ALLOC FAILED: mmap failed](#error-memory-alloc-failed-mmap-failed)
@@ -9,23 +9,24 @@
 * [Virus Protection Alert](#virus-protection-alert)
 * [Change Currency to Mine](#change-currency-to-mine)
 
-## SeLockMemoryPrivilege failed
+## "Obtaining SeLockMemoryPrivilege failed."
 
-Please see [config.txt](config.txt) under section **LARGE PAGE SUPPORT**
+For professional versions of Windows see [this article](https://msdn.microsoft.com/en-gb/library/ms190730.aspx).
+Make sure to reboot afterwards!
 
-For Windows 7 pro, or Windows 8 and above see [this article](https://msdn.microsoft.com/en-gb/library/ms190730.aspx)  (make sure to reboot afterwards!).
+For Windows 7/10 Home:
 
-For Windows 7 Home :
+1) Download and install [Windows Server 2003 Resource Kit Tools](https://www.microsoft.com/en-us/download/details.aspx?id=17657). Ignore any incompatibility warning during installation.
 
-1) Download and install [Windows Server 2003 Resource Kit Tools](https://www.microsoft.com/en-us/download/details.aspx?id=17657).  Ignore incompatiablity warning during installation.
+2) Open cmd or PowerShell as an administrator.
 
-2) In cmd or power shell: `ntrights -u %USERNAME% +r SeLockMemoryPrivilege`  (where %USERNAME% is the user that will be running the program.  This command needs to be run as admin)
+3) Use `ntrights -u %USERNAME% +r SeLockMemoryPrivilege` where %USERNAME% is the user that will be running the program.
 
-3) Reboot.
+4) Reboot.
 
 Reference: http://rybkaforum.net/cgi-bin/rybkaforum/topic_show.pl?pid=259791#pid259791
 
-*Warning: do not download ntrights.exe from any other site other then the offical Microsoft download page.*
+*Warning: Do not download ntrights.exe from any other site other than the offical Microsoft download page.*
 
 ## VirtualAlloc failed
 
diff --git a/doc/Linux_deployment.md b/doc/Linux_deployment.md
index 323a97f..3219e8a 100644
--- a/doc/Linux_deployment.md
+++ b/doc/Linux_deployment.md
@@ -15,6 +15,7 @@ For automatic deployments, please use the steps above to obtain config.txt and u
 
 ```
 #!/bin/bash
+sudo apt install curl
 curl -O `curl -s https://api.github.com/repos/fireice-uk/xmr-stak/releases/latest | grep -o 'browser_download_url.*xmr-stak-portbin-linux.tar.gz' | sed 's/.*"//'`
 curl -O http://path.to/your/config.txt
 tar xzf xmr-stak-portbin-linux.tar.gz
diff --git a/doc/compile.md b/doc/compile.md
index e97affa..771c9d1 100644
--- a/doc/compile.md
+++ b/doc/compile.md
@@ -9,7 +9,7 @@
 * [Compile on Windows](compile_Windows.md)
 * [Compile on Linux](compile_Linux.md)
 * [Compile on FreeBSD](compile_FreeBSD.md)
-* [Compile on MacOS](compile_MacOS.md)
+* [Compile on macOS](compile_macOS.md)
 
 ## Build System
 
@@ -31,7 +31,7 @@ After the configuration you need to compile the miner, follow the guide for your
 * [Compile in Windows](compile_Windows.md)
 * [Compile in Linux](compile_Linux.md)
 * [Compile in FreeBSD](compile_FreeBSD.md)
-* [Compile in MacOS](compile_MacOS.md)
+* [Compile in macOS](compile_macOS.md)
 
 ## Generic Build Options
 - `CMAKE_INSTALL_PREFIX` install miner to the home folder
diff --git a/doc/compile_Linux.md b/doc/compile_Linux.md
index b7104ac..8d48e72 100644
--- a/doc/compile_Linux.md
+++ b/doc/compile_Linux.md
@@ -25,7 +25,7 @@
     make install
 
     # Arch
-    sudo pacman -S base-devel hwloc openssl cmake libmicrohttpd
+    sudo pacman -S --needed base-devel hwloc openssl cmake libmicrohttpd
     git clone https://github.com/fireice-uk/xmr-stak.git
     mkdir xmr-stak/build
     cd xmr-stak/build
@@ -64,6 +64,34 @@
     cd xmr-stak/build
     cmake ..
     make install
+    
+    # TinyCore Linux 8.x
+    # TinyCore is 32-bit only, but there is an x86-64 port, known as "Pure 64,"
+    # hosted on the TinyCore home page, and it works well.
+    # Beware that huge page support is not enabled in the kernel distributed
+    # with Pure 64.  Consider http://wiki.tinycorelinux.net/wiki:custom_kernel
+    # Note that as of yet there are no distro packages for microhttpd or hwloc.
+    # hwloc is easy enough to install manually though, shown below.
+    # Also note that only CPU mining has been tested on this platform, thus the
+    # disabling of CUDA and OpenCL shown below.
+    tce-load -iw openssl-dev.tcz cmake.tcz make.tcz gcc.tcz git.tcz \
+                 glibc_base-dev.tcz linux-4.8.1_api_headers.tcz \
+                 glibc_add_lib.tcz
+    wget https://www.open-mpi.org/software/hwloc/v1.11/downloads/hwloc-1.11.8.tar.gz
+    tar xzvf hwloc-1.11.8.tar.gz
+    cd hwloc-1.11.8
+    ./configure --prefix=/usr/local
+    make
+    sudo make install
+    cd ..
+    git clone http://github.com/fireice-uk/xmr-stak
+    cd xmr-stak
+    mkdir build
+    cd build
+    CC=gcc cmake .. -DCUDA_ENABLE=OFF \
+                    -DOpenCL_ENABLE=OFF \
+                    -DMICROHTTPD_ENABLE=OFF
+    make install
 ```
 
 - g++ version 5.1 or higher is required for full C++11 support. 
diff --git a/doc/compile_Windows.md b/doc/compile_Windows.md
index adf99cb..940e0c3 100644
--- a/doc/compile_Windows.md
+++ b/doc/compile_Windows.md
@@ -23,7 +23,7 @@
 
 ### Cuda 8.0+ (only needed to use NVIDIA GPUs)
 
-- donwload and install [https://developer.nvidia.com/cuda-downloads](https://developer.nvidia.com/cuda-downloads)
+- download and install [https://developer.nvidia.com/cuda-downloads](https://developer.nvidia.com/cuda-downloads)
 - for minimal install choose `Custom installation options` during the install and select
     - CUDA/Develpment
     - CUDA/Visual Studio Integration (ignore the warning during the install that VS2017 is not supported)
@@ -76,10 +76,11 @@
 
 ## Compile
 
-- download and unzip `xmr-stak`
+- download `xmr-stak` [Source Code.zip](https://github.com/fireice-uk/xmr-stak/releases) and save to a location in your home folder (C:\Users\USERNAME\)
+- extract the Source Code.zip file
 - open the command line terminal `cmd`
-- `cd` to your unzipped source code directory
-- execute the following commands (NOTE: path to VS2017 can be different)
+- `cd` to the extracted source code directory
+- execute the following commands (NOTE: path to Visual Studio 2017 Community can be different)
   ```
   # Next line is only if compiling for Cuda 9.1 and using Visual Studio 2017 >= 15.5 (released 12/04/17)
   "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvarsall.bat" x64 -vcvars_ver=14.11  
@@ -88,6 +89,8 @@
   mkdir build
   cd build
   ```
+  - Sometimes Windows will `cd` to `C:\Users\USERNAME\source\build\` instead of `C:\Users\USERNAME\xmr-stak-<version>\build`. Ensure you are in the correct `build` directory before proceeding. 
+  
   - for CUDA 8*
     ```
     cmake -G "Visual Studio 15 2017 Win64" -T v140,host=x64 ..
diff --git a/doc/compile_MacOS.md b/doc/compile_macOS.md
index 1b0af91..46f1d5b 100644
--- a/doc/compile_MacOS.md
+++ b/doc/compile_macOS.md
@@ -1,4 +1,4 @@
-# Compile **xmr-stak** for MacOS
+# Compile **xmr-stak** for macOS
 
 ## Dependencies
 
@@ -18,7 +18,13 @@ make install
 
 ### For AMD GPUs
 
-> 🖐 We need help with AMD GPU compilation instructions. Please submit a PR if you managed to install [AMD APP SDK](http://developer.amd.com/amd-accelerated-parallel-processing-app-sdk/) and to compile `xmr-stak` on MacOS.
+OpenCL is bundled with Xcode, so no other depedency then the basic ones needed. Just enable OpenCL via the `-DOpenCL_ENABLE=ON` CMake option.
+
+```shell
+brew install hwloc libmicrohttpd gcc openssl cmake
+cmake . -DOPENSSL_ROOT_DIR=/usr/local/opt/openssl -DCUDA_ENABLE=OFF -DOpenCL_ENABLE=ON
+make install
+```
 
 ### For CPU-only mining
 
diff --git a/doc/usage.md b/doc/usage.md
index 60cf69b..a810469 100644
--- a/doc/usage.md
+++ b/doc/usage.md
@@ -23,7 +23,7 @@ The number of files depends on the available backends.
 `set XMRSTAK_NOWAIT=1` disable the dialog `Press any key to exit.` for non UAC execution.
 
 
-## Usage on Linux & MacOS
+## Usage on Linux & macOS
 1) Open a terminal within the folder with the binary
 2) Start the miner with `./xmr-stak`