. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* pfSense_MODULE: nat */ ##|+PRIV ##|*IDENT=page-firewall-nat-portforward-edit ##|*NAME=Firewall: NAT: Port Forward: Edit page ##|*DESCR=Allow access to the 'Firewall: NAT: Port Forward: Edit' page. ##|*MATCH=firewall_nat_edit.php* ##|-PRIV require("guiconfig.inc"); require_once("itemid.inc"); require("filter.inc"); require("shaper.inc"); $specialsrcdst = explode(" ", "any pptp pppoe l2tp openvpn"); $ifdisp = get_configured_interface_with_descr(); foreach ($ifdisp as $kif => $kdescr) { $specialsrcdst[] = "{$kif}"; $specialsrcdst[] = "{$kif}ip"; } if (!is_array($config['nat']['rule'])) { $config['nat']['rule'] = array(); } $a_nat = &$config['nat']['rule']; $id = $_GET['id']; if (isset($_POST['id'])) $id = $_POST['id']; if (isset($_GET['dup'])) { $id = $_GET['dup']; $after = $_GET['dup']; } if (isset($id) && $a_nat[$id]) { $pconfig['disabled'] = isset($a_nat[$id]['disabled']); $pconfig['nordr'] = isset($a_nat[$id]['nordr']); address_to_pconfig($a_nat[$id]['source'], $pconfig['src'], $pconfig['srcmask'], $pconfig['srcnot'], $pconfig['srcbeginport'], $pconfig['srcendport']); address_to_pconfig($a_nat[$id]['destination'], $pconfig['dst'], $pconfig['dstmask'], $pconfig['dstnot'], $pconfig['dstbeginport'], $pconfig['dstendport']); $pconfig['proto'] = $a_nat[$id]['protocol']; $pconfig['localip'] = $a_nat[$id]['target']; $pconfig['localbeginport'] = $a_nat[$id]['local-port']; $pconfig['descr'] = $a_nat[$id]['descr']; $pconfig['interface'] = $a_nat[$id]['interface']; $pconfig['associated-rule-id'] = $a_nat[$id]['associated-rule-id']; $pconfig['nosync'] = isset($a_nat[$id]['nosync']); $pconfig['natreflection'] = $a_nat[$id]['natreflection']; if (!$pconfig['interface']) $pconfig['interface'] = "wan"; } else { $pconfig['interface'] = "wan"; $pconfig['src'] = "any"; $pconfig['srcbeginport'] = "any"; $pconfig['srcendport'] = "any"; } if (isset($_GET['dup'])) unset($id); /* run through $_POST items encoding HTML entties so that the user * cannot think he is slick and perform a XSS attack on the unwilling */ foreach ($_POST as $key => $value) { $temp = $value; $newpost = htmlentities($temp); if($newpost <> $temp) $input_errors[] = "Invalid characters detected ($temp). Please remove invalid characters and save again."; } if ($_POST) { if(strtoupper($_POST['proto']) == "TCP" || strtoupper($_POST['proto']) == "UDP" || strtoupper($_POST['proto']) == "TCP/UDP") { if ($_POST['srcbeginport_cust'] && !$_POST['srcbeginport']) $_POST['srcbeginport'] = $_POST['srcbeginport_cust']; if ($_POST['srcendport_cust'] && !$_POST['srcendport']) $_POST['srcendport'] = $_POST['srcendport_cust']; if ($_POST['srcbeginport'] == "any") { $_POST['srcbeginport'] = 0; $_POST['srcendport'] = 0; } else { if (!$_POST['srcendport']) $_POST['srcendport'] = $_POST['srcbeginport']; } if ($_POST['srcendport'] == "any") $_POST['srcendport'] = $_POST['srcbeginport']; if ($_POST['dstbeginport_cust'] && !$_POST['dstbeginport']) $_POST['dstbeginport'] = $_POST['dstbeginport_cust']; if ($_POST['dstendport_cust'] && !$_POST['dstendport']) $_POST['dstendport'] = $_POST['dstendport_cust']; if ($_POST['dstbeginport'] == "any") { $_POST['dstbeginport'] = 0; $_POST['dstendport'] = 0; } else { if (!$_POST['dstendport']) $_POST['dstendport'] = $_POST['dstbeginport']; } if ($_POST['dstendport'] == "any") $_POST['dstendport'] = $_POST['dstbeginport']; if ($_POST['localbeginport_cust'] && !$_POST['localbeginport']) $_POST['localbeginport'] = $_POST['localbeginport_cust']; /* Make beginning port end port if not defined and endport is */ if (!$_POST['srcbeginport'] && $_POST['srcendport']) $_POST['srcbeginport'] = $_POST['srcendport']; if (!$_POST['dstbeginport'] && $_POST['dstendport']) $_POST['dstbeginport'] = $_POST['dstendport']; } else { $_POST['srcbeginport'] = 0; $_POST['srcendport'] = 0; $_POST['dstbeginport'] = 0; $_POST['dstendport'] = 0; } if (is_specialnet($_POST['srctype'])) { $_POST['src'] = $_POST['srctype']; $_POST['srcmask'] = 0; } else if ($_POST['srctype'] == "single") { $_POST['srcmask'] = 32; } if (is_specialnet($_POST['dsttype'])) { $_POST['dst'] = $_POST['dsttype']; $_POST['dstmask'] = 0; } else if ($_POST['dsttype'] == "single") { $_POST['dstmask'] = 32; } else if (is_ipaddr($_POST['dsttype'])) { $_POST['dst'] = $_POST['dsttype']; $_POST['dstmask'] = 32; $_POST['dsttype'] = "single"; } unset($input_errors); $pconfig = $_POST; /* input validation */ if(strtoupper($_POST['proto']) == "TCP" or strtoupper($_POST['proto']) == "UDP" or strtoupper($_POST['proto']) == "TCP/UDP") { $reqdfields = explode(" ", "interface proto dstbeginport dstendport localip"); $reqdfieldsn = explode(",", "Interface,Protocol,Destination port from,Destination port to,NAT IP"); } else { $reqdfields = explode(" ", "interface proto localip"); $reqdfieldsn = explode(",", "Interface,Protocol,NAT IP"); } if ($_POST['srctype'] == "single" || $_POST['srctype'] == "network") { $reqdfields[] = "src"; $reqdfieldsn[] = "Source address"; } if ($_POST['dsttype'] == "single" || $_POST['dsttype'] == "network") { $reqdfields[] = "dst"; $reqdfieldsn[] = "Destination address"; } do_input_validation($_POST, $reqdfields, $reqdfieldsn, &$input_errors); if (!$_POST['srcbeginport']) { $_POST['srcbeginport'] = 0; $_POST['srcendport'] = 0; } if (!$_POST['dstbeginport']) { $_POST['dstbeginport'] = 0; $_POST['dstendport'] = 0; } if (($_POST['localip'] && !is_ipaddroralias($_POST['localip']))) { $input_errors[] = "\"{$_POST['localip']}\" is not valid NAT IP address or host alias."; } if ($_POST['srcbeginport'] && !is_portoralias($_POST['srcbeginport'])) $input_errors[] = "{$_POST['srcbeginport']} is not a valid start source port. It must be a port alias or integer between 1 and 65535."; if ($_POST['srcendport'] && !is_portoralias($_POST['srcendport'])) $input_errors[] = "{$_POST['srcendport']} is not a valid end source port. It must be a port alias or integer between 1 and 65535."; if ($_POST['dstbeginport'] && !is_portoralias($_POST['dstbeginport'])) $input_errors[] = "{$_POST['dstbeginport']} is not a valid start destination port. It must be a port alias or integer between 1 and 65535."; if ($_POST['dstendport'] && !is_portoralias($_POST['dstendport'])) $input_errors[] = "{$_POST['dstendport']} is not a valid end destination port. It must be a port alias or integer between 1 and 65535."; if ($_POST['localbeginport'] && !is_portoralias($_POST['localbeginport'])) { $input_errors[] = "{$_POST['localbeginport']} is not a valid local port. It must be a port alias or integer between 1 and 65535."; } /* if user enters an alias and selects "network" then disallow. */ if( ($_POST['srctype'] == "network" && is_alias($_POST['src']) ) || ($_POST['dsttype'] == "network" && is_alias($_POST['dst']) ) ) { $input_errors[] = "You must specify single host or alias for alias entries."; } if (!is_specialnet($_POST['srctype'])) { if (($_POST['src'] && !is_ipaddroralias($_POST['src']))) { $input_errors[] = "{$_POST['src']} is not a valid source IP address or alias."; } if (($_POST['srcmask'] && !is_numericint($_POST['srcmask']))) { $input_errors[] = "A valid source bit count must be specified."; } } if (!is_specialnet($_POST['dsttype'])) { if (($_POST['dst'] && !is_ipaddroralias($_POST['dst']))) { $input_errors[] = "{$_POST['dst']} is not a valid destination IP address or alias."; } if (($_POST['dstmask'] && !is_numericint($_POST['dstmask']))) { $input_errors[] = "A valid destination bit count must be specified."; } } if ($_POST['srcbeginport'] > $_POST['srcendport']) { /* swap */ $tmp = $_POST['srcendport']; $_POST['srcendport'] = $_POST['srcbeginport']; $_POST['srcbeginport'] = $tmp; } if ($_POST['dstbeginport'] > $_POST['dstendport']) { /* swap */ $tmp = $_POST['dstendport']; $_POST['dstendport'] = $_POST['dstbeginport']; $_POST['dstbeginport'] = $tmp; } if (!$input_errors) { if (($_POST['dstendport'] - $_POST['dstbeginport'] + $_POST['localbeginport']) > 65535) $input_errors[] = "The target port range must be an integer between 1 and 65535."; } /* check for overlaps */ foreach ($a_nat as $natent) { if (isset($id) && ($a_nat[$id]) && ($a_nat[$id] === $natent)) continue; if ($natent['interface'] != $_POST['interface']) continue; if ($natent['destination']['address'] != $_POST['dst']) continue; if (($natent['proto'] != $_POST['proto']) && ($natent['proto'] != "tcp/udp") && ($_POST['proto'] != "tcp/udp")) continue; list($begp,$endp) = explode("-", $natent['destination']['port']); if (!$endp) $endp = $begp; if (!( (($_POST['beginport'] < $begp) && ($_POST['endport'] < $begp)) || (($_POST['beginport'] > $endp) && ($_POST['endport'] > $endp)))) { $input_errors[] = "The destination port range overlaps with an existing entry."; break; } } if (!$input_errors) { $natent = array(); $natent['disabled'] = isset($_POST['disabled']) ? true:false; $natent['nordr'] = isset($_POST['nordr']) ? true:false; pconfig_to_address($natent['source'], $_POST['src'], $_POST['srcmask'], $_POST['srcnot'], $_POST['srcbeginport'], $_POST['srcendport']); pconfig_to_address($natent['destination'], $_POST['dst'], $_POST['dstmask'], $_POST['dstnot'], $_POST['dstbeginport'], $_POST['dstendport']); $natent['protocol'] = $_POST['proto']; $natent['target'] = $_POST['localip']; $natent['local-port'] = $_POST['localbeginport']; $natent['interface'] = $_POST['interface']; $natent['descr'] = $_POST['descr']; $natent['associated-rule-id'] = $_POST['associated-rule-id']; if($_POST['filter-rule-association'] == "pass") $natent['associated-rule-id'] = "pass"; if($_POST['nosync'] == "yes") $natent['nosync'] = true; else unset($natent['nosync']); if ($_POST['natreflection'] == "enable" || $_POST['natreflection'] == "disable") $natent['natreflection'] = $_POST['natreflection']; else unset($natent['natreflection']); // If we used to have an associated filter rule, but no-longer should have one if (!empty($a_nat[$id]) && ( empty($natent['associated-rule-id']) || $natent['associated-rule-id'] != $a_nat[$id]['associated-rule-id'] ) ) { // Delete the previous rule delete_id($a_nat[$id]['associated-rule-id'], $config['filter']['rule']); mark_subsystem_dirty('filter'); } $need_filter_rule = false; // Updating a rule with a filter rule associated if (!empty($natent['associated-rule-id'])) $need_filter_rule = true; // Create a rule or if we want to create a new one if( $natent['associated-rule-id']=='new' ) { $need_filter_rule = true; unset( $natent['associated-rule-id'] ); $_POST['filter-rule-association']='add-associated'; } // If creating a new rule, where we want to add the filter rule, associated or not else if( isset($_POST['filter-rule-association']) && ($_POST['filter-rule-association']=='add-associated' || $_POST['filter-rule-association']=='add-unassociated') ) $need_filter_rule = true; // Determine NAT entry ID now, we need it for the firewall rule if (isset($id) && $a_nat[$id]) $a_nat[$id] = $natent; else { if (is_numeric($after)) $id = $after + 1; else $id = count($a_nat); } if ($need_filter_rule == true) { /* auto-generate a matching firewall rule */ $filterent = array(); unset($filterentid); // If a rule already exists, load it if (!empty($natent['associated-rule-id'])) { $filterentid = get_id($natent['associated-rule-id'], $config['filter']['rule']); if ($filterentid == false) { pconfig_to_address($filterent['source'], $_POST['src'], $_POST['srcmask'], $_POST['srcnot'], $_POST['srcbeginport'], $_POST['srcendport']); $filterent['associated-rule-id'] = $natent['associated-rule-id']; } else $filterent =& $config['filter']['rule'][$filterentid]; } else pconfig_to_address($filterent['source'], $_POST['src'], $_POST['srcmask'], $_POST['srcnot'], $_POST['srcbeginport'], $_POST['srcendport']); // Update interface, protocol and destination $filterent['interface'] = $_POST['interface']; $filterent['protocol'] = $_POST['proto']; $filterent['destination']['address'] = $_POST['localip']; $dstpfrom = $_POST['localbeginport']; $dstpto = $dstpfrom + $_POST['dstendport'] - $_POST['dstbeginport']; if ($dstpfrom == $dstpto) $filterent['destination']['port'] = $dstpfrom; else $filterent['destination']['port'] = $dstpfrom . "-" . $dstpto; /* * Our firewall filter description may be no longer than * 63 characters, so don't let it be. */ $filterent['descr'] = substr("NAT " . $_POST['descr'], 0, 62); // If this is a new rule, create an ID and add the rule if( $_POST['filter-rule-association']=='add-associated' ) { $filterent['associated-rule-id'] = $natent['associated-rule-id'] = get_unique_id(); $config['filter']['rule'][] = $filterent; } mark_subsystem_dirty('filter'); } // Update the NAT entry now if (isset($id) && $a_nat[$id]) $a_nat[$id] = $natent; else { if (is_numeric($after)) array_splice($a_nat, $after+1, 0, array($natent)); else $a_nat[] = $natent; } mark_subsystem_dirty('natconf'); write_config(); header("Location: firewall_nat.php"); exit; } } $pgtitle = array("Firewall","NAT","Port Forward: Edit"); include("head.inc"); ?>
Edit Redirect entry
Disabled > Disable this rule
Set this option to disable this rule without removing it from the list.
No RDR (NOT) > Enabling this option will disable redirection for traffic matching this rule.
Hint: this option is rarely needed, don't use this unless you know what you're doing.
Interface
Choose which interface this rule applies to.
Hint: in most cases, you'll want to use WAN here.
Protocol
Choose which IP protocol this rule should match.
Hint: in most cases, you should specify TCP  here.
Source - Show source address and port range
Destination > not
Use this option to invert the sense of the match.

Type:  
Address:   /
Destination port range
from:  
to:

Specify the port or port range for the destination of the packet for this mapping.
Hint: you can leave the 'to' field empty if you only want to map a single port
Redirect target IP
Enter the internal IP address of the server on which you want to map the ports.
e.g. 192.168.1.12
Redirect target port
Specify the port on the machine with the IP address entered above. In case of a port range, specify the beginning port of the range (the end port will be calculated automatically).
Hint: this is usually identical to the 'from' port above
Description
You may enter a description here for your reference (not parsed).
No XMLRPC Sync >
HINT: This prevents the rule from automatically syncing to other CARP members.
NAT reflection
Filter rule association \n"; echo $linkedrule; ?>
Filter rule association
   
 
"") foreach($config['aliases']['alias'] as $alias_name) { switch ($alias_name['type']) { case "port": if($isfirst == 1) $portaliases .= ","; $portaliases .= "'" . $alias_name['name'] . "'"; $isfirst = 1; break; case "host": case "network": case "openvpn": case "urltable": if($addrisfirst == 1) $aliasesaddr .= ","; $aliasesaddr .= "'" . $alias_name['name'] . "'"; $addrisfirst = 1; break; default: break; } } ?>