. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ ##|+PRIV ##|*IDENT=page-firewall-nat-portforward-edit ##|*NAME=Firewall: NAT: Port Forward: Edit page ##|*DESCR=Allow access to the 'Firewall: NAT: Port Forward: Edit' page. ##|*MATCH=firewall_nat_edit.php* ##|-PRIV require("guiconfig.inc"); if (!is_array($config['nat']['rule'])) { $config['nat']['rule'] = array(); } //nat_rules_sort(); $a_nat = &$config['nat']['rule']; $id = $_GET['id']; if (isset($_POST['id'])) $id = $_POST['id']; if (isset($_GET['dup'])) { $id = $_GET['dup']; $after = $_GET['dup']; } if (isset($id) && $a_nat[$id]) { $pconfig['extaddr'] = $a_nat[$id]['external-address']; $pconfig['proto'] = $a_nat[$id]['protocol']; list($pconfig['beginport'],$pconfig['endport']) = explode("-", $a_nat[$id]['external-port']); $pconfig['localip'] = $a_nat[$id]['target']; $pconfig['localbeginport'] = $a_nat[$id]['local-port']; $pconfig['descr'] = $a_nat[$id]['descr']; $pconfig['interface'] = $a_nat[$id]['interface']; $pconfig['nosync'] = isset($a_nat[$id]['nosync']); if (!$pconfig['interface']) $pconfig['interface'] = "wan"; } else { $pconfig['interface'] = "wan"; } if (isset($_GET['dup'])) unset($id); /* run through $_POST items encoding HTML entties so that the user * cannot think he is slick and perform a XSS attack on the unwilling */ foreach ($_POST as $key => $value) { $temp = $value; $newpost = htmlentities($temp); if($newpost <> $temp) $input_errors[] = "Invalid characters detected ($temp). Please remove invalid characters and save again."; } if ($_POST) { if ($_POST['beginport_cust'] && !$_POST['beginport']) $_POST['beginport'] = $_POST['beginport_cust']; if ($_POST['endport_cust'] && !$_POST['endport']) $_POST['endport'] = $_POST['endport_cust']; if ($_POST['localbeginport_cust'] && !$_POST['localbeginport']) $_POST['localbeginport'] = $_POST['localbeginport_cust']; if (!$_POST['endport']) $_POST['endport'] = $_POST['beginport']; /* Make beginning port end port if not defined and endport is */ if (!$_POST['beginport'] && $_POST['endport']) $_POST['beginport'] = $_POST['endport']; unset($input_errors); $pconfig = $_POST; /* input validation */ if(strtoupper($_POST['proto']) == "TCP" or strtoupper($_POST['proto']) == "UDP" or strtoupper($_POST['proto']) == "TCP/UDP") { $reqdfields = explode(" ", "interface proto beginport endport localip localbeginport"); $reqdfieldsn = explode(",", "Interface,Protocol,External port from,External port to,NAT IP,Local port"); } else { $reqdfields = explode(" ", "interface proto localip"); $reqdfieldsn = explode(",", "Interface,Protocol,NAT IP"); } do_input_validation($_POST, $reqdfields, $reqdfieldsn, &$input_errors); if (($_POST['localip'] && !is_ipaddroralias($_POST['localip']))) { $input_errors[] = "\"{$_POST['localip']}\" is not valid NAT IP address or host alias."; } /* only validate the ports if the protocol is TCP, UDP or TCP/UDP */ if(strtoupper($_POST['proto']) == "TCP" or strtoupper($_POST['proto']) == "UDP" or strtoupper($_POST['proto']) == "TCP/UDP") { if (($_POST['beginport'] && !is_ipaddroralias($_POST['beginport']) && !is_port($_POST['beginport']))) { $input_errors[] = "The start port must be an integer between 1 and 65535."; } if (($_POST['endport'] && !is_ipaddroralias($_POST['endport']) && !is_port($_POST['endport']))) { $input_errors[] = "The end port must be an integer between 1 and 65535."; } if (($_POST['localbeginport'] && !is_ipaddroralias($_POST['localbeginport']) && !is_port($_POST['localbeginport']))) { $input_errors[] = "The local port must be an integer between 1 and 65535."; } if ($_POST['beginport'] > $_POST['endport']) { /* swap */ $tmp = $_POST['endport']; $_POST['endport'] = $_POST['beginport']; $_POST['beginport'] = $tmp; } if (!$input_errors) { if (($_POST['endport'] - $_POST['beginport'] + $_POST['localbeginport']) > 65535) $input_errors[] = "The target port range must be an integer between 1 and 65535."; } } /* check for overlaps */ foreach ($a_nat as $natent) { if (isset($id) && ($a_nat[$id]) && ($a_nat[$id] === $natent)) continue; if ($natent['interface'] != $_POST['interface']) continue; if ($natent['external-address'] != $_POST['extaddr']) continue; if (($natent['proto'] != $_POST['proto']) && ($natent['proto'] != "tcp/udp") && ($_POST['proto'] != "tcp/udp")) continue; list($begp,$endp) = explode("-", $natent['external-port']); if (!$endp) $endp = $begp; if (!( (($_POST['beginport'] < $begp) && ($_POST['endport'] < $begp)) || (($_POST['beginport'] > $endp) && ($_POST['endport'] > $endp)))) { $input_errors[] = "The external port range overlaps with an existing entry."; break; } } if (!$input_errors) { $natent = array(); if ($_POST['extaddr']) $natent['external-address'] = $_POST['extaddr']; $natent['protocol'] = $_POST['proto']; if ($_POST['beginport'] == $_POST['endport']) $natent['external-port'] = $_POST['beginport']; else $natent['external-port'] = $_POST['beginport'] . "-" . $_POST['endport']; $natent['target'] = $_POST['localip']; $natent['local-port'] = $_POST['localbeginport']; $natent['interface'] = $_POST['interface']; $natent['descr'] = $_POST['descr']; if($_POST['nosync'] == "yes") $natent['nosync'] = true; else unset($natent['nosync']); if (isset($id) && $a_nat[$id]) $a_nat[$id] = $natent; else { if (is_numeric($after)) array_splice($a_nat, $after+1, 0, array($natent)); else $a_nat[] = $natent; } touch($d_natconfdirty_path); if ($_POST['autoadd']) { /* auto-generate a matching firewall rule */ $filterent = array(); $filterent['interface'] = $_POST['interface']; $filterent['protocol'] = $_POST['proto']; $filterent['source']['any'] = ""; $filterent['destination']['address'] = $_POST['localip']; $dstpfrom = $_POST['localbeginport']; $dstpto = $dstpfrom + $_POST['endport'] - $_POST['beginport']; if ($dstpfrom == $dstpto) $filterent['destination']['port'] = $dstpfrom; else $filterent['destination']['port'] = $dstpfrom . "-" . $dstpto; $filterent['descr'] = "NAT " . $_POST['descr']; /* * Our firewall filter description may be no longer than * 63 characters, so don't let it be. */ $filterent['descr'] = substr("NAT " . $_POST['descr'], 0, 59); $config['filter']['rule'][] = $filterent; /* auto add rule to external port 21 as well since we are using * pftpx to help open up ports automatically */ if($_POST['endport'] == "21") { $filterent = array(); $filterent['interface'] = $_POST['interface']; $filterent['protocol'] = $_POST['proto']; $filterent['source']['any'] = ""; if($_POST['extaddr'] == "") { $filterent['destination']['network'] = "wanip"; } else { $filterent['destination']['address'] = $_POST['extaddr']; } $dstpfrom = $_POST['localbeginport']; $dstpto = $dstpfrom + $_POST['endport'] - $_POST['beginport']; if ($dstpfrom == $dstpto) $filterent['destination']['port'] = $dstpfrom; else $filterent['destination']['port'] = $dstpfrom . "-" . $dstpto; $filterent['descr'] = "NAT " . $_POST['descr']; /* See comment above */ $filterent['descr'] = substr("NAT " . $_POST['descr'], 0, 63); $config['filter']['rule'][] = $filterent; touch($d_filterconfdirty_path); write_config(); header("Location: firewall_nat.php?savemsg=The%20changes%20have%20been%20saved.%20%20Please%20note%20that%20we%20have%20added%20an%20additional%20rule%20for%20the%20FTP%20helper."); exit; } touch($d_filterconfdirty_path); } write_config(); header("Location: firewall_nat.php"); exit; } } $pgtitle = array("Firewall","NAT","Port Forward: Edit"); include("head.inc"); ?>
Edit NAT entry
Interface
Choose which interface this rule applies to.
Hint: in most cases, you'll want to use WAN here.
External address
If you want this rule to apply to another IP address than the IP address of the interface chosen above, select it here (you need to define Virtual IP addresses on the first). Also note that if you are trying to redirect connections on the LAN select the "any" option.
Protocol
Choose which IP protocol this rule should match.
Hint: in most cases, you should specify TCP  here.
External port range
from:  
to:

Specify the port or port range on the firewall's external address for this mapping.
Hint: you can leave the 'to' field empty if you only want to map a single port
NAT IP
Enter the internal IP address of the server on which you want to map the ports.
e.g. 192.168.1.12
Local port
Specify the port on the machine with the IP address entered above. In case of a port range, specify the beginning port of the range (the end port will be calculated automatically).
Hint: this is usually identical to the 'from' port above
Description
You may enter a description here for your reference (not parsed).
No XMLRPC Sync >
HINT: This prevents the rule from automatically syncing to other CARP members.
  Auto-add a firewall rule to permit traffic through this NAT rule
 
"") foreach($config['aliases']['alias'] as $alias_name) { if(!stristr($alias_name['address'], ".")) { if($isfirst == 1) $aliases .= ","; $aliases .= "'" . $alias_name['name'] . "'"; $isfirst = 1; } else { if($addrisfirst == 1) $aliasesaddr .= ","; $aliasesaddr .= "'" . $alias_name['name'] . "'"; $addrisfirst = 1; } } ?>