.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgment:
* "This product includes software developed by the pfSense Project
* for use in the pfSense® software distribution. (http://www.pfsense.org/).
*
* 4. The names "pfSense" and "pfSense Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* coreteam@pfsense.org.
*
* 5. Products derived from this software may not be called "pfSense"
* nor may "pfSense" appear in their names without prior written
* permission of the Electric Sheep Fencing, LLC.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
*
* "This product includes software developed by the pfSense Project
* for use in the pfSense software distribution (http://www.pfsense.org/).
*
* THIS SOFTWARE IS PROVIDED BY THE pfSense PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE pfSense PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
##|+PRIV
##|*IDENT=page-system-hasync
##|*NAME=System: High Availability Sync
##|*DESCR=Allow access to the 'System: High Availability Sync' page.
##|*MATCH=system_hasync.php*
##|-PRIV
require_once("guiconfig.inc");
if (!is_array($config['hasync'])) {
$config['hasync'] = array();
}
$a_hasync = &$config['hasync'];
$checkbox_names = array(
'pfsyncenabled',
'synchronizeusers',
'synchronizeauthservers',
'synchronizecerts',
'synchronizerules',
'synchronizeschedules',
'synchronizealiases',
'synchronizenat',
'synchronizeipsec',
'synchronizeopenvpn',
'synchronizedhcpd',
'synchronizewol',
'synchronizestaticroutes',
'synchronizelb',
'synchronizevirtualip',
'synchronizetrafficshaper',
'synchronizetrafficshaperlimiter',
'synchronizednsforwarder',
'synchronizecaptiveportal');
if ($_POST) {
$pconfig = $_POST;
foreach ($checkbox_names as $name) {
$a_hasync[$name] = $pconfig[$name] ? $pconfig[$name] : false;
}
$a_hasync['pfsyncpeerip'] = $pconfig['pfsyncpeerip'];
$a_hasync['pfsyncinterface'] = $pconfig['pfsyncinterface'];
$a_hasync['synchronizetoip'] = $pconfig['synchronizetoip'];
$a_hasync['username'] = $pconfig['username'];
if ($pconfig['passwordfld'] == $pconfig['passwordfld_confirm']) {
if ($pconfig['passwordfld'] != DMYPWD) {
$a_hasync['password'] = $pconfig['passwordfld'];
}
} else {
$input_errors[] = gettext("Password and confirmation must match.");
}
if ($pconfig['pfsyncpeerip'] != "") {
if (!is_ipaddrv4($pconfig['pfsyncpeerip'])) {
$input_errors[] = gettext("pfsync Synchronize Peer IP must be an IPv4 IP.");
}
}
if (!$input_errors) {
write_config("Updated High Availability Sync configuration");
interfaces_sync_setup();
header("Location: system_hasync.php");
exit();
}
}
foreach ($checkbox_names as $name) {
$pconfig[$name] = $a_hasync[$name];
}
$pconfig['pfsyncpeerip'] = $a_hasync['pfsyncpeerip'];
$pconfig['pfsyncinterface'] = $a_hasync['pfsyncinterface'];
$pconfig['synchronizetoip'] = $a_hasync['synchronizetoip'];
$pconfig['username'] = $a_hasync['username'];
$pconfig['passwordfld'] = $a_hasync['password'];
$ifaces = get_configured_interface_with_descr();
$ifaces["lo0"] = "loopback";
$pgtitle = array(gettext("System"), gettext("High Availability Sync"));
$shortcut_section = "carp";
// Build a list of available interfaces
$iflist = array();
foreach ($ifaces as $ifname => $iface) {
$iflist[$ifname] = $iface;
}
include("head.inc");
if ($input_errors) {
print_input_errors($input_errors);
}
$form = new Form;
$section = new Form_Section('State Synchronization Settings (pfsync)');
$section->addInput(new Form_Checkbox(
'pfsyncenabled',
'Synchronize states',
'pfsync transfers state insertion, update, and deletion messages between firewalls.',
($pconfig['pfsyncenabled'] === 'on'),
'on'
))->setHelp('Each firewall sends these messages out via multicast on a specified interface, using the PFSYNC protocol (IP Protocol 240).' .
' It also listens on that interface for similar messages from other firewalls, and imports them into the local state table.
' .
'This setting should be enabled on all members of a failover group.
' .
'Clicking "Save" will force a configuration sync if it is enabled! (see Configuration Synchronization Settings below)');
$section->addInput(new Form_Select(
'pfsyncinterface',
'Synchronize Interface',
$pconfig['pfsyncinterface'],
$iflist
))->setHelp('If Synchronize States is enabled this interface will be used for communication.
' .
'It is recommended to set this to an interface other than LAN! A dedicated interface works the best.
' .
'An IP must be defined on each machine participating in this failover group.
' .
'An IP must be assigned to the interface on any participating sync nodes.');
$section->addInput(new Form_Input(
'pfsyncpeerip',
'pfsync Synchronize Peer IP',
'text',
$pconfig['pfsyncpeerip'],
['placeholder' => 'IP Address']
))->setHelp('Setting this option will force pfsync to synchronize its state table to this IP address. The default is directed multicast.');
$form->add($section);
$section = new Form_Section('Configuration Synchronization Settings (XMLRPC Sync)');
$section->addInput(new Form_Input(
'synchronizetoip',
'Synchronize Config to IP',
'text',
$pconfig['synchronizetoip'],
['placeholder' => 'IP Address']
))->setHelp('Enter the IP address of the firewall to which the selected configuration sections should be synchronized.
' .
'XMLRPC sync is currently only supported over connections using the same protocol and port as this system - make sure the remote system\'s port and protocol are set accordingly!
' .
'Do not use the Synchronize Config to IP and password option on backup cluster members!');
$section->addInput(new Form_Input(
'username',
'Remote System Username',
'text',
$pconfig['username']
))->setHelp('Enter the webConfigurator username of the system entered above for synchronizing the configuration.
' .
'Do not use the Synchronize Config to IP and username option on backup cluster members!');
$section->addPassword(new Form_Input(
'passwordfld',
'Remote System Password',
'password',
$pconfig['passwordfld']
))->setHelp('Enter the webConfigurator password of the system entered above for synchronizing the configuration.
' .
'Do not use the Synchronize Config to IP and password option on backup cluster members!');
$group = new Form_MultiCheckboxGroup('Select options to sync');
$group->add(new Form_MultiCheckbox(
'synchronizeusers',
'Synchronize Users and Groups',
'User manager users and groups',
($pconfig['synchronizeusers'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizeauthservers',
'Synchronize Auth Servers',
'Authentication servers (e.g. LDAP, RADIUS)',
($pconfig['synchronizeauthservers'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizecerts',
'Synchronize Certificates',
'Certificate Authorities, Certificates, and Certificate Revocation Lists',
($pconfig['synchronizecerts'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizerules',
'Synchronize Rules',
'Firewall rules ',
($pconfig['synchronizerules'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizeschedules',
'Synchronize Firewall schedules',
'Firewall schedules ',
($pconfig['synchronizeschedules'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizealiases',
'Synchronize Firewall aliases',
'Firewall aliases ',
($pconfig['synchronizealiases'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizenat',
'Synchronize NAT',
'NAT configuration ',
($pconfig['synchronizenat'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizeipsec',
'Synchronize IPsec',
'IPsec configuration ',
($pconfig['synchronizeipsec'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizeopenvpn',
'Synchronize OpenVPN',
'OpenVPN configuration ',
($pconfig['synchronizeopenvpn'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizedhcpd',
'Synchronize DHCPD',
'DHCP Server settings ',
($pconfig['synchronizedhcpd'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizewol',
'Synchronize Wake-on-LAN',
'WoL Server settings ',
($pconfig['synchronizewol'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizestaticroutes',
'Synchronize Static Routes',
'Static Route configuration ',
($pconfig['synchronizestaticroutes'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizelb',
'Synchronize Load Balancer',
'Load Balancer configuration ',
($pconfig['synchronizelb'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizevirtualip',
'Synchronize Virtual IPs',
'Virtual IPs ',
($pconfig['synchronizevirtualip'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizetrafficshaper',
'Synchronize traffic shaper (queues)',
'Traffic Shaper configuration ',
($pconfig['synchronizetrafficshaper'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizetrafficshaperlimiter',
'Synchronize traffic shaper (limiter)',
'Traffic Shaper Limiters configuration ',
($pconfig['synchronizetrafficshaperlimiter'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizednsforwarder',
'Synchronize DNS (Forwarder/Resolver)',
'DNS Forwarder and DNS Resolver configurations ',
($pconfig['synchronizednsforwarder'] === 'on'),
'on'
));
$group->add(new Form_MultiCheckbox(
'synchronizecaptiveportal',
'Synchronize Captive Portal)',
'Captive Portal ',
($pconfig['synchronizecaptiveportal'] === 'on'),
'on'
));
$section->add($group);
$form->add($section);
print($form);
include("foot.inc");