en to bs translation catalogue (6697 entries)

en:  - %1$s to %2$s
bs:  - %1$s ka %2$s

en:  Address
bs: Adresa

en:  Any flags.
bs: Bilo koja oznaka.

en:  Inbound
bs: Unutar

en:  Indicates that the schedule is currently active.
bs: Pokazuje da je pravilo trenutno aktivno.

en:  Loading, please wait...
bs: Učitavam, molimo sačekajte...

en:  Outbound
bs: Van

en:  Path cost
bs: Težina puta

en:  Priority
bs: Prioritet

en:  Remaining disk space for log files:
bs: Dostupan prostor na disku za sve ostale log fajlove:

en:  Type
bs: Tip

en:  bits
bs: biti

en:  done!
bs: završeno!

en:  modified '%s' pool:
bs: modifikovan pool '%s':

en:  not
bs: _ne

en:  of
bs: od

en:  port begin
bs: port početak

en:  port end
bs: port kraj

en:  seconds (
bs: sekunde (

en:  to
bs: ka

en: "%s" is not a valid redirect target IP address or host alias.
bs: "%s" nije validna meta za redirektanje IP adrese ili host aliasa.

en: "tun" mode carries IPv4 and IPv6 (OSI layer 3) and is the most common and compatible mode across all platforms.%1$s"tap" mode is capable of carrying 802.3 (OSI Layer 2.)
bs: "tun" način nosi IPv4 i IPv6 (OSI layer 3) i jedan je od najčešćih i najkompatibilnijih načina neovisno od platforme. %1$s"tap" način je u mogućnosti nošenja 802.3 (OSI layer 2).

en: # Connections
bs: # Konekcije

en: # States
bs: # Stanja

en: # Stories
bs: # Priče

en: # of Bits to store Roll Id needs to be between 1..31.
bs: # bita za spašavanje Roll Id-a mora biti između 1..31

en: # of Bits to store Ticket Id needs to be between 1..16.
bs: # bita za spašavanje Ticket Id-a mora biti između 1..16

en: # of Bits to store checksum needs to be between 1..31.
bs: # bita za spašavanje checksum-a mora biti između 1..31

en: # of Checksum bits
bs: # checksum bita

en: # of Roll bits
bs: # roll bita

en: # of Ticket bits
bs: # Tiket bitova

en: # of Tickets
bs: # Tiketa

en: # of leases in use
bs: # posudbi koje se koriste

en: %1$d Matched %2$s Log Entries.
bs: %1$d Poklopilo se %2$s Log unosi.

en: %1$s (%2$s) - Notification
bs: %1$s (%2$s) - notifikacija

en: %1$s (%2$s/%3$s) active and good for %4$d Minutes
bs: %1$s (%2$s/%3$s) aktivno i dobro za %4$d minuta

en: %1$s (%2$s/%3$s) already used and expired
bs: %1$s (%2$s/%3$s) je već iskorišteno i istekao

en: %1$s (%2$s/%3$s) good for %4$s Minutes
bs: %1$s (%2$s/%3$s) dobar za %4$s minute

en: %1$s (%2$s/%3$s): not found on any registered Roll
bs: %1$s (%2$s/%3$s): nije pronađen ni na jednom registrovanom Rollu

en: %1$s Matched %2$s Log Entries.
bs: %1$s se poklopio sa %2$s log unosima.

en: %1$s Service is %2$s
bs: %1$s Servis je %2$s

en: %1$s at line %2$d
bs: %1$s u liniji %2$d

en: %1$s by %2$s
bs: %1$s po %2$s

en: %1$s has a CIDR mask of %2$s, which does not contain enough addresses.
bs: %1$s ima CIDR masku %2$s koja ne sadrži dovoljno adresa.

en: %1$s installation failed!
bs: Instalacija %1$s nije uspjela!

en: %1$s installation successfully completed.
bs: Uspješno završena instalacija %1$s

en: %1$s invalid: %2$s !!
bs: %1$s pogrešan: %2$s!!

en: %1$s invalid: %2$s!!
bs: %1$s pogrešno: %2$s!!

en: %1$s is Copyright &copy; %2$s %3$s. All rights reserved.
bs: %1$s je zaštićeno &copy; %2$s %3$s. Sva prava zadržana.

en: %1$s is based upon/includes various free software packages, listed below. The authors of %1$s would like to thank the authors of these software packages for their efforts.
bs: %1$s je baziran na uključivanjima raznih besplatnih softverskih paketa, izlistanih ispod. Autori %1$s žele da se zahvale autorima ovih softverskih paketa za njihov trud.

en: %1$s is not a valid %2$s address, FQDN or alias.
bs: %1$s nije validna %2$s adresa, FQDN ili alias

en: %1$s is restoring the configuration %2$s
bs: %1$s vraća konfiguraciju %2$s

en: %1$s reinstallation failed!
bs: %1$s reinstalacija nije uspjela!

en: %1$s reinstallation successfully completed.
bs: %1$s reinstalacija uspješno završena.

en: %1$s removal failed!
bs: %1$s uklanjanje nije uspjelo!

en: %1$s removal successfully completed.
bs: %1$s uklanjanje uspješno završeno.

en: %1$s requires *AT LEAST* %2$s RAM to function correctly.%3$s
bs: %1$s zahtijeva *BAREM* %2$s RAMa da bi funkcionisao korektno.%3$s

en: %1$s seconds (%2$s) ago
bs: %1$s sekundi, prije (%2$s)

en: %1$s updated to %2$s
bs: %1$s ažuriran na %2$s

en: %1$s%3$s is booting, then packages will be reinstalled in the background.%2$s%1$sDo not make changes in the GUI until this is complete.%2$s
bs: %1$s%3$s se učitava, zatim će paketi biti ponovo instalirani u pozadini.%2$s%1$sNemojte praviti izmjene u GUIu dok se ovo ne završi.%2$s

en: %1$s(%2$s or a):
bs: %1$s(%2$s ili a):

en: %1$s, %2$s Service is %3$s
bs: %1$s, %2$s servis je %3$s

en: %1$s/%2$s is not a valid subnet.
bs: %1$s/%2$s nije validan subnet.

en: %1$sAllow Snoop:%2$s Allow recursive and nonrecursive access from hosts within the netblock defined below. Used for cache snooping and ideally should only be configured for the administrative host.%3$s
bs: %1$sDozvoli Snoop:%2$s Dozvoli rekurzivne i nerekurzvine pristupe od hostova unutar netbloka definisanog ispod. Korišteno za snooping keša i idealno bi trebalo biti konfigurisano samo za administrativnog hosta.%3$s

en: %1$sAllow:%2$s Allow queries from hosts within the netblock defined below.%3$s
bs: %1$sDozvoli:%2$s Dozvoli upite od hostova unutar netbloka definisanog ispod.%3$s

en: %1$sCOMMAND%2$s	%3$sThe command which holds the socket.%4$s
bs: %1$sCOMMAND%2$s	%3$sKomanda koja drži socket.%4$s

en: %1$sClick the anchor icon %2$s to move checked rules before the clicked row. Hold down the shift key and click to move the rules after the clicked row.
bs: %1$sKlikni ikonu sidra %2$s za pomjeranje označenih pravila ispod kliknutog reda. Držite shift dugme i kliknite za pomjeranje pravila nakon odabranog reda.

en: %1$sCodel Active Queue%2$s
bs: %1$sCodel aktivni red%2$s

en: %1$sCreate%2$s an internal CA.
bs: %1$sStvori%2$s interni CA.

en: %1$sDeny Nonlocal:%2$s Allow only authoritative local-data queries from hosts within the netblock defined below. Messages that are disallowed are dropped.%3$s
bs: %1$sZabrani Nelokalno:%2$s Dozvoli samo autoritativne local-data upite od hostova unutar netbloka definisanog ispod. Poruke koje nisu dozvoljene su bačene.%3$s

en: %1$sDeny:%2$s Stops queries from hosts within the netblock defined below.%3$s
bs: %1$sZabrani:%2$s Zaustavlja upite od hostova unutar netbloka definisanog ispod. %3$s

en: %1$sEnter the LAN interface name or 'a' for auto-detection %2$sNOTE: this enables full Firewalling/NAT mode.%3$s(%4$s a or nothing if finished):%5$s
bs: %1$sUnesite ime LAN interfacea ili 'a' za auto-detekciju %2$sOPASKA: Ovo uključuje puni Firewall/NAT mod.%3$s(%4$s a ili ništa ako ste završili):%5$s

en: %1$sEnter the Optional %2$s interface name or 'a' for auto-detection%3$s(%4$s a or nothing if finished):%5$s
bs: %1$sUnesi moguće %2$s ime interfacea ili 'a' za auto-detekciju%3$s(%4$s a ili ništa ako ste završili):%5$s

en: %1$sError: Could not find settings for %2$s%3$s
bs: %1$sGreška: Nemoguće pronaći postavke za %2$s%3$s

en: %1$sExplicit Congestion Notification%2$s
bs: %1$sEksplicitna zakrčenost notifikacije%2$s

en: %1$sFD%2$s	%3$sThe file descriptor number of the socket.%4$s
bs: %1$sFD%2$s	%3$sBroj deskriptora za socket.%4$s

en: %1$sFOREIGN ADDRESS%2$s	%3$sThe address the foreign end of the socket is bound to.%4$s
bs: %1$sFOREIGN ADDRESS%2$s	%3$sAdresa nepoznatog kraja socketa je vezana.%4$s

en: %1$sFlags:%2$s A = authorized, E = Extended Rate (802.11g), P = Power saving mode.%3$s%1$sCapabilities:%2$s E = ESS (infrastructure mode), I = IBSS (ad-hoc mode), P = privacy (WEP/TKIP/AES), S = Short preamble, s = Short slot time.
bs: %1$sOznake:%2$s A = autorizovano, E = Produženi odnos (802.11g), P = Štednja energije.%3$s%1$Mogućnosti:%2$s E = ESS (infrastrukturni način), I = IBSS (ad-hoc mode), P = privatnost (WEP/TKIP/AES), S = Short preamble, s = Vrijeme kratkog slota.

en: %1$sIf the above message is still displayed after a couple of hours, use the 'Clear Package Lock' button on the %3$s page and reinstall packages manually.%2$s
bs: %1$sAko se poruka iznad još uvijek prikazuje nakon nekoliko sati, koristite dugme 'Očisti paketni lock' na %3$s stranici i ponovo instalirajte pakete ručno.%2$s

en: %1$sInvalid VLAN tag '%2$s'%3$s
bs: %1$sNevažeći VLAN tag '%2$s'%3$s

en: %1$sInvalid interface name '%2$s'%3$s
bs: %1$sNevažeće ime interfacea'%2$s'%3$s

en: %1$sLOCAL ADDRESS%2$s	%3$sThe address the local end of the socket is bound to.%4$s
bs: %1$sLOCAL ADDRESS%2$s	%3$sAdresa lokalnog kraja socketa je vezana.%4$s

en: %1$sMonitor%2$s the filter reload progress.
bs: %1$sMonitor%2$s procenat ponovnog učitavanja filtera.

en: %1$sOptional interface %2$s description found: %3$s
bs: %1$sMogući interface %2$s opis pronađen: %3$s

en: %1$sPID%2$s	%3$sThe process ID of the command which holds the socket.%4$s
bs: %1$sPID%2$s	%3$sID Procesa komande koja drži socket.%4$s

en: %1$sPROTO%2$s	%3$sThe transport protocol associated with the socket.%4$s
bs: %1$sPROTO%2$s	%3$s Transportni protokol asociran sa socketom.%4$s

en: %1$sPackages are currently being reinstalled in the background.%2$s%1$sDo not make changes in the GUI until this is complete.%2$s
bs: %1$s se učitava, zatim će paketi biti ponovo instalirani u pozadini.%2$s%1$sNemojte praviti izmjene u GUIu dok se ovo ne završi.%2$s

en: %1$sRandom Early Detection In and Out%2$s
bs: $1$s nasumična rana detekcija in i out%2$s

en: %1$sRandom Early Detection%2$s
bs: %1$s nasumična rana detekcija%2$s

en: %1$sRefuse Nonlocal:%2$s Allow only authoritative local-data queries from hosts within the netblock defined below. Sends a DNS rcode REFUSED error message back to the client for messages that are disallowed.
bs: %1$sOdbij Nelokalno:%2$s Dozvoli samo autoritativne local-data upite od hostova unutar netbloka definisanog ispod. Šalje DNS rcode REFUSED error poruku nazad klijentu za poruke koje nisu dozvoljene.

en: %1$sRefuse:%2$s Stops queries from hosts within the netblock defined below, but sends a DNS rcode REFUSED error message back to the client.%3$s
bs: %1$sOdbij:%2$s Zaustavlja upite od hostova unutar netbloka definisanog ispod, ali šalje DNS rcode REFUSED error poruku natrag klijentu. %3$s

en: %1$sThe pure NAT mode uses a set of NAT rules to direct packets to the target of the port forward. It has better scalability, but it must be possible to accurately determine the interface and gateway IP used for communication with the target at the time the rules are loaded. There are no inherent limits to the number of ports other than the limits of the protocols.  All protocols available for port forwards are supported.%2$sThe NAT + proxy mode uses a helper program to send packets to the target of the port forward. It is useful in setups where the interface and/or gateway IP used for communication with the target cannot be accurately determined at the time the rules are loaded. Reflection rules are not created for ranges larger than 500 ports and will not be used for more than 1000 ports total between all port forwards. Only TCP and UDP protocols are supported.%3$sIndividual rules may be configured to override this system setting on a per-rule basis.
bs: %1$sČisti NAT način koristi skup NAT pravila za usmjeravanje paketa ka meti forwardanja porta. Ima bolju skalabilnost, ali mora biti moguće precizno odrediti interface i gateway IP koji se koristi za komunikaciju sa metom u tom periodu kada su pravila učitana. Nema inherentnih ograničenja ka broju portova osim broja osim ograničenja protokola. Svi dostupni protokoli za forwardanje portova su podržani. %2$s NAT + proxy način koristi pomoćni program za slanje paketa ka meti port forwardanja. Korisno je u postavljanjima gdje se interface i/ili gateway IP koji se koriste za komunikaciju sa metom ne mogu precizno odrediti kada se pravila učitaju. Reflektivna pravila nisu kreirana za domete veće od 500 portova i neće biti korišteni za više od 1000 portova ukupno između svih port forwardanja. Samo TCP i UDP protokoli su podržani. %3$sIndividualna pravila mogu biti konfigurisana da overrideaju ove sistemske postavke na način po-pravilo.

en: %1$sUSER%2$s	%3$sThe user who owns the socket.%4$s
bs: %1$sKORISNIK%2$s %3$sKorisnik koji posjeduje socket.%4$s

en: %d is the maximum number of configured servers.
bs: %d je maksimalan broj konfigurisanih servera.

en: %s IPs have been disabled. Please note that disabling does not survive a reboot and some configuration changes will re-enable.
bs: %s IPovi će biti isključeni. Molimo zapamtite da isključivanje neće preživjeti restart i neke konfiguracijske promjene će se ponovo uključiti

en: %s Table
bs: %s tablica

en: %s Timeout value must be numeric and positive.
bs: %s Timeout vrijednost mora biti numerička i pozitivna.

en: %s captive portal
bs: %s zarobljeni portal

en: %s has been restarted.
bs: %s je ponovo pokrenut

en: %s has been started.
bs: %s je pokrenut

en: %s has been stopped.
bs: %s je zaustavljen

en: %s has detected a crash report or programming bug.
bs: %s je detektovao izvještaj o krahiranju ili bug u programiranju.

en: %s has no subnet.
bs: %s nema subneta.

en: %s interface path cost for STP needs to be an integer between 1 and 200000000.
bs: %s interface cijena putanje za STP mora biti cijeli broj između 1 i 200000000.

en: %s interface priority for STP needs to be an integer between 0 and 240.
bs: %s interface prioritet za STP mora biti cijeli broj između 0 i 240.

en: %s invalid: Too short!
bs: %s pogrešno: Prekratko!

en: %s is a subnet containing more than 64 IP addresses (in "disabled" list).
bs: %s je subnet koji sadrži više od 64 IP adrese (u listi "isključenih").

en: %s is a subnet containing more than 64 IP addresses (in "enabled" list).
bs: %s je subnet koji sadrži više od 64 IP adrese (u listi "uključenih").

en: %s is a subnet containing more than 64 IP addresses.
bs: %s je subnet koji sadrži više od 64 IP adrese.

en: %s is not a valid IP address or IPv4 subnet (in "disabled" list).
bs: %s nije validna IP adresa ili IPv4 subnet (u listi "isključenih").

en: %s is not a valid IP address or IPv4 subnet (in "enabled" list).
bs: %s nije validna IP adresa ili IPv4 subnet (u listi "uključenih")

en: %s is not a valid IP address, IPv4 subnet, or alias.
bs: %s nije validna IP adresa, IPv4 subnet ili alias.

en: %s is not a valid IPv4 address or could not be deleted.
bs: %s nije validna IPv4 adresa i ne može biti obrisana.

en: %s is not a valid IPv6 address or could not be deleted.
bs: %s nije validna IPv6 adresa ili je nije moguće obrisati.

en: %s is not a valid authentication server
bs: %s nije validan server za autentikaciju

en: %s is not a valid destination IP address or alias.
bs: %s nije validna destinacijska IP adresa ili alias.

en: %s is not a valid end destination port. It must be a port alias or integer between 1 and 65535.
bs: %s nije validan krajnji destinacijski port. Mora biti port alias ili broj između 1 i 65535.

en: %s is not a valid end source port. It must be a port alias or integer between 1 and 65535.
bs: %snije validan krajnji izvorni port. Mora biti port alias ili broj između 1 i 65535.

en: %s is not a valid port or alias.
bs: %s nije validan port ili alias.

en: %s is not a valid port or port range.
bs: %s nije validan port ili interval portova

en: %s is not a valid redirect target port. It must be a port alias or integer between 1 and 65535.
bs: %s nije validan port za redirekciju. Mora biti port alias ili broj između 1 i 65535.

en: %s is not a valid source IP address or alias.
bs: %s nije validna izvorna IP adresa ili alias.

en: %s is not a valid start destination port. It must be a port alias or integer between 1 and 65535.
bs: %s nije validan početni destinacijski port. Mora biti port alias ili broj između 1 i 65535.

en: %s is not a valid start source port. It must be a port alias or integer between 1 and 65535.
bs: %s nije validan izvorni port. Mora biti port alias ili broj između 1 i 65535.

en: %s is not an IP address. Please correct the error to continue
bs: %s nije IP adresa. Ispravite grešku za nastavak

en: %s is only valid if the gateway is set to 'default'.
bs: %s je validan ako je gateway postavljen na 'zadano'.

en: %s is only valid with protocol TCP.
bs: %s je validan jedino sa TCP protokolom.

en: %s is part of another bridge. Remove the interface from bridge members to continue.
bs: %s je dio nekog drugog bridgea. Uklonite interface iz članova bridgea za nastavak.

en: %s made unknown change
bs: %s je napravio nepoznatu promjenu

en: %s must be a valid IPv4 address or alias.
bs: %s mora biti validna IPv4 adresa ili alias.

en: %s must be a valid IPv4 address.
bs: %s mora biti validna IPv4 adresa.

en: %s must be a valid IPv4 or IPv6 address or alias.
bs: %s mora biti validna IPv4 ili IPv6 adresa ili alias.

en: %s must be a valid IPv4 or IPv6 address.
bs: %s mora biti validna IPv4 ili IPv6 adresa.

en: %s must be a valid IPv6 address or alias.
bs: %s mora biti validna IPv6 adresa ili alias.

en: %s must be a valid IPv6 address.
bs: %s mora biti validna IPv6 adresa.

en: %s records.
bs: %s unosi.

en: %sClick for additional PPTP and L2TP configuration options. Save first if changes have been made.
bs: %sKlikni za dodatne PPTP i L2TP konfiguracijske opcije. Spasi prvo ako su promjene napravljene.

en: %sRetrieving support information %s %s
bs: %sUčitavam informaciju o podršci %s %s

en: %sUser-created themes are unsupported, use at your own risk.
bs: %sKorisnički kreirane teme nisu podržane, koristite na sopstveni rizik.

en: %sWarning: filter rule removed (destination network '%s' does not exist anymore).
bs: %sUpozorenje: filter pravilo uklonjeno (destinacijska mreža '%s' više ne postoji).

en: %sWarning: filter rule removed (interface '%s' does not exist anymore).
bs: %sUpozorenje: filter pravilo uklonjeno (interface '%s' više ne postoji).

en: %sWarning: filter rule removed (source network '%s' does not exist anymore).
bs: %sUpozorenje: filter pravilo uklonjeno (izvorna mreža '%s' više ne postoji).

en: %sWarning: traffic shaper rule removed (destination network '%s' does not exist anymore).
bs: %sUpozorenje: pravilo oblikovanja saobraćaja uklonjeno (destinacijska mreža '%s' više ne postoji).

en: %sWarning: traffic shaper rule removed (interface '%s' does not exist anymore).
bs: %sUpozorenje: pravilo oblikovanja saobraćaja uklonjeno (interface '%s' više ne postoji).

en: %sWarning: traffic shaper rule removed (source network '%s' does not exist anymore).
bs: %sUpozorenje: pravilo oblikovanja saobraćaja uklonjeno (izvorna mreža '%s' više ne postoji).

en: %sWriting configuration...
bs: %sZapisujem konfiguraciju...

en: &nbsp;&nbsp;&nbsp;&nbsp;100 * probe interval / (time period - loss interval)
bs: &nbsp;&nbsp;&nbsp;&nbsp;100 * interval testiranja / (vremenski period - interval gubitka)

en: &quot;Quick&quot; rule. Applied immediately on match.
bs: &quot;Brzo&quot; pravilo. Primijenjeno odmah na poklapanju

en: ',' aren't allowed.
bs: ',' nije dozvoljen.

en: 'Maximum TTL for RRsets and Messages' must be a positive integer.
bs: 'Maksimalan TTL za RRsetove i Poruke' mora biti pozitivan cijeli broj.

en: 'Minimum TTL for RRsets and Messages' must be a positive integer.
bs: 'Minimalan TTL za RRsetove i Poruke' mora biti pozitivan cijeli broj.

en: 'Server address' parameter should NOT be set to any IP address currently in use on this firewall.
bs: Parametar 'Server adresa' ne smije biti postavljen ni na jednu IP adresu koja se trenutno koristi na ovom firewallu.

en: (%1$s hour %2$s GMT) | (%1$s hours %2$s GMT)
bs[0]: (%1$s sat %2$s GMT)
bs[1]: (%1$s sati %2$s GMT)
bs[2]: (%1$s sat %2$s GMT)

en: (%1$shexadecimal%2$s from 0 to %3$s) The value in this field is the (Delegated) IPv6 prefix ID. This determines the configurable network ID based on the dynamic IPv6 connection. The default value is 0.
bs: (%1$sheksadecimalni%2$s od 0 do %3$s) Vrijednost u ovom polju je (delegirani) IPv6 prefiksni ID. Ovo određuje konfiguracioni mrežni ID baziran na dinamičkoj IPv6 konekciji. Zadana vrijednost je 0.

en: (1 to 100):
bs: (1 do 100):

en: (This is not generally recommended, but may be needed for some scenarios.)
bs: (ovo generalno nije preporučeno ali može biti korisno za neke situacije)

en: (This privilege effectively gives administrator-level access to the user)
bs: (Ova privilegija efektivno daje administratorski nivo pristupa korisniku)

en: (This privilege effectively gives administrator-level access to users in the group)
bs: (Ova privilegija efektivno daje administratorski nivo pristupa svim korisnicima u grupi)

en: (U)SIM card lock State
bs: (U)SIM stanje zakjučavanja kartice

en: (Updating...)
bs: (Ažuriranje...)

en: (User %s)
bs: (Korisnik %s)

en: (admin privilege)
bs: (adminova privilegija)

en: (default)
bs: (zadano)

en: (historical)
bs: (historijski)

en: (newest at bottom)
bs: (najnovije na dnu)

en: (newest at top)
bs: (najnovije na vrhu)

en: (no graph)
bs: (bez grafa)

en: (other)
bs: (ostali)

en: (platform default)
bs: (platformski zadano)

en: * A proper Thermal Sensor / Module can be configured under
bs: * Termalni senzor/modul može biti konfigurisan u

en: *6RD Border relay
bs: *6RD Granični relej

en: *Action
bs: *Radnja

en: *Address
bs: *Adresa

en: *Address Family
bs: *Familija adresa

en: *Address(es)
bs: *Adresa(e)

en: *Alias Name
bs: *Alias ime

en: *Aliases to import
bs: *Aliasi za importovanje

en: *Assigned privileges
bs: *Dodijeljene privilegije

en: *Auth digest algorithm
bs: *Autentikacijski digest algoritam

en: *Authentication Method
bs: *Metoda autentikacije

en: *Authentication Server
bs: Autentikacijkski server

en: *Authentication type
bs: *Tip autentikacije

en: *Backend for authentication
bs: *Backend za autentikaciju

en: *Bind credentials
bs: Dodijeli akreditive

en: *Branch
bs: *Grana

en: *CA to sign with
bs: *CA sa kojim će se potpisati

en: *CRL data
bs: *CRL podaci

en: *CSR to sign
bs: *CSR koji će se potpisati

en: *Certificate Authority
bs: *Autoritet certifikata

en: *Certificate Depth
bs: *Dubina certifikata

en: *Certificate Lifetime (days)
bs: *Vrijeme trajanja certifikata (dana)

en: *Certificate Type
bs: *Tip certifikata

en: *Certificate authority
bs: *Autoritet certifikata

en: *Certificate data
bs: *Podaci certifikata

en: *City
bs: *Grad

en: *Common Name
bs: *Zajedničko ime

en: *Confirmation
bs: *Potvrda

en: *Containers
bs: *Kontejneri

en: *Count
bs: *Brojač

en: *Country Code
bs: *Kod države

en: *DH Group
bs: *DH grupa

en: *DH Parameter Length
bs: *Dužina DH parametra

en: *Date
bs: *Datum

en: *Description
bs: *Opis

en: *Descriptive name
bs: *Deskriptivno ime

en: *Destination
bs: *Destinacija

en: *Destination network
bs: *Destinacijska mreža

en: *Destination port range
bs: *Destinacijski domet portova

en: *Destination server
bs: *Destinacijski server

en: *Device mode
bs: *Način uređaja

en: *Digest Algorithm
bs: *Digest algoritam

en: *Direction
bs: *Smjer

en: *Domain
bs: *Domena

en: *Email Address
bs: *Email adresa

en: *Encryption Algorithm
bs: *Enkripcijski algoritam

en: *Encryption Algorithms
bs: *Enkripcijski algoritmi

en: *Existing Certificates
bs: *Postojeći certifikati

en: *External subnet IP
bs: *Eksterni subnet IP

en: *Final certificate data
bs: *Konačni podaci certifikata

en: *First level tag
bs: *Tag prvog nivoa

en: *GIF Remote Address
bs: *GIF udaljena adresa

en: *GIF tunnel local address
bs: *GIF tunnel lokalna adresa

en: *GIF tunnel remote address
bs: *GIF tunnel udaljena adresa

en: *GRE Remote Address
bs: *GRE udaljena adresa

en: *GRE tunnel local address
bs: *GRE tunnel lokalna adresa

en: *GRE tunnel remote address
bs: *GRE tunnel udaljena adresa

en: *Gateway
bs: *Gejtvej

en: *Gateway Priority
bs: *Prioritet gatewaya

en: *Group Authentication
bs: *Grupna autentikacija

en: *Group Name
bs: *Ime grupe

en: *Group member attribute
bs: *Atribut člana grupe

en: *Group name
bs: *Ime grupe

en: *Group naming attribute
bs: *Atribut koji grupa daje

en: *HTTPS server name
bs: *HTTPS ime servera

en: *Hash Algorithm
bs: *Heš algoritam

en: *Hash Algorithms
bs: *Heš algoritmi

en: *Hostname
bs: *Ime hosta

en: *Hostname or IP address
bs: *Host ime ili IP adresa

en: *IP Address
bs: *IP adresa

en: *IP Protocol
bs: *IP protokol

en: *IPv4 Address
bs: *IPv4 adresa

en: *IPv6 Interface
bs: *IPv6 interface

en: *IPv6 address
bs: *IPv6 adresa

en: *Identifier
bs: *Identifikator

en: *Interface to monitor
bs: *Interface za praćenje

en: *Interface to send update from
bs: *Interface sa kojeg se šalju ažuriranja

en: *Interface(s)
bs: *Interface(ovi)

en: *Interfaces
bs: *Interfejsi

en: *Internal IP
bs: *Interni IP

en: *Internet Protocol
bs: *Internet protokol

en: *Key
bs: *Ključ

en: *Key Exchange version
bs: *Verzija zamjene ključa

en: *Key Type
bs: *Tip ključa

en: *Key length
bs: *Dužina ključa

en: *Key length (bits)
bs: *Dužina ključa (bit)

en: *Key name
bs: *Ime ključa

en: *LAGG Protocol
bs: *LAGG Protokol

en: *Language
bs: *Jezik

en: *Level
bs: *Nivo

en: *Lifetime (Seconds)
bs: *Životni vijek (u sekundama)

en: *Lifetime (days)
bs: *Životni vijek (dani)

en: *Link Interface(s)
bs: *Veze interface(ova)

en: *Link Type
bs: *Tip veze

en: *Local IP address
bs: *Lokalna IP adresa

en: *Local Network
bs: *Lokalna mreža

en: *Local port
bs: *Lokalni port

en: *MAC Address
bs: *MAC adresa

en: *MAC address
bs: *MAC adresa

en: *Member Interfaces
bs: *Članovi interfacea

en: *Members
bs: *Članovi

en: *Method
bs: *Metoda

en: *Minutes per ticket
bs: *Minuta po tiketu

en: *Mode
bs: *Način

en: *My Certificate
bs: *Moj certifikat

en: *My identifier
bs: *Moj identifikator

en: *Name
bs: *Ime

en: *Negotiation mode
bs: *Način pregovaranja

en: *Network Interfaces
bs: *Mrežni interfejsi

en: *Networks
bs: *Mreže

en: *Number of L2TP users
bs: *Broj L2TP korisnika

en: *Organization
bs: *Organizacija

en: *Outgoing Network Interfaces
bs: *Odlazeći Mrežni Interfejsi

en: *Parent Interface
bs: *Roditeljski interface

en: *Parent Interfaces
bs: *Roditeljski Interfejsi

en: *Parent interface
bs: *Roditeljski interface

en: *Password
bs: *Lozinka

en: *Peer Certificate Authority
bs: *Autoritet Peer Certifikata

en: *Peer identifier
bs: *Peer identifikator

en: *Phone number
bs: *Broj telefona

en: *Port value
bs: *Port vrijednost

en: *Pre-Shared Key
bs: *Ranije-Dijeljeni ključ

en: *Primary RADIUS server
bs: *Primarni RADIUS server

en: *Private key data
bs: *Podaci privatnog ključa

en: *Protocol
bs: *Protokol

en: *Protocol version
bs: *Verzije protokola

en: *RADIUS protocol
bs: *RADIUS protokol

en: *Range
bs: *Domet

en: *Record Type
bs: *Tip unosa

en: *Redirect target IP
bs: *Redirekcija traženog IP

en: *Redirect target port
bs: *Redirekcija ciljanog porta

en: *Remote Address Range
bs: *Domet udaljene adrese

en: *Remote Gateway
bs: *Udaljeni gejtvej

en: *Remote IP address
bs: *Udaljena IP adresa

en: *Remote Network
bs: *Udaljena mreža

en: *Remote address range
bs: *Domet udaljene adrese

en: *Router mode
bs: *Način routera

en: *Router priority
bs: *Prioritet routera

en: *Schedule Name
bs: *Ime rasporeda

en: *Scope
bs: *Područje

en: *Secret
bs: *Tajna

en: *Secret type
bs: *Tip tajne

en: *Server Address
bs: *Adresa servera

en: *Server address
bs: *Server adresa

en: *Server certificate
bs: *Server certifikat

en: *Server host or address
bs: *Server host ili adresa

en: *Server mode
bs: *Server način

en: *Service Type
bs: *Tip servisa

en: *Services offered
bs: *Ponuđeni servisi

en: *Shared Key
bs: *Dijeljeni ključ

en: *Shared Secret
bs: *Dijeljena tajna

en: *Signing Certificate Authority
bs: *Potpisivanje autoriteta certifikata

en: *Source
bs: *Izvor

en: *Source Address
bs: *Izvorna adresa

en: *Source address
bs: *izvorna adresa

en: *State or Province
bs: *Država ili provincija

en: *System Domain Local Zone Type
bs: *Sistemski tip lokalne zone domene

en: *TLS Key
bs: *TLS ključ

en: *TLS Key Usage Mode
bs: *TLS ključ način korištenja

en: *TTL (seconds)
bs: *TTL (u sekundama)

en: *Tag(s)
bs: *Tag(ovi)

en: *Time
bs: *Vrijeme

en: *Timezone
bs: *Vremenska zona

en: *Total User Count
bs: *Ukupan brojač korisnika

en: *Trigger Level
bs: *Nivo aktivacije

en: *Tunable
bs: *Opcija za štimanje

en: *Type
bs: *Tip

en: *User Authentication
bs: *Korisnička autentikacija

en: *User Max Logins
bs: *Maksimalan broj logina korisnika

en: *User naming attribute
bs: *Atribut koji korisnik daje

en: *Username
bs: *Korisničko ime

en: *VLAN Tag
bs: *VLAN tag

en: *Value
bs: *Vrijednost

en: *Vouchers
bs: *Vaučeri

en: *Zone name
bs: *Ime zone

en: - The alert interval must be greater than or equal to the probe interval. There is no point checking for alerts more often than probes are done.
bs: - Interval upozorenja mora biti veći ili jednak intervalu testiranja. Nema svrhe provjeravati upozorenja češće nego što se vrše testiranja.

en: - The loss interval must be greater than or equal to the high latency threshold.
bs: - Interval gubitka mora biti veći ili jednak visoko latentnom odstupanju.

en: - The time period must be greater than twice the probe interval plus the loss interval. This guarantees there is at least one completed probe at all times.
bs: - Vremenski period mora biti duplo veći od intervala testiranja plus intervala gubitka. Ovo garantira da postoji barem jedno završeno testiranje u svakom trenutku.

en: ------- Media Supported by this interface -------
bs: ------- Mediji podržani ovim interfaceom -------

en: / per how many second(s) (TCP only)
bs: / po koliko sekundi (samo TCP)

en: /tmp RAM Disk Size
bs: /tmp RAM Disk veličina

en: /tmp RAM Disk<br />Do not set lower than 40.
bs: /tmp RAM Disk <br />Ne postavljaj ispod 40.

en: /tmp Size must be numeric and should not be less than 40MiB.
bs: /tmp Veličina mora biti numerička i ne smije biti manja od 40MiB

en: /var RAM Disk Size
bs: /var RAM Disk veličina

en: /var RAM Disk<br />Do not set lower than 60.
bs: /var RAM Disk<br />Ne postavljajte ispod 60.

en: /var Size must be numeric and should not be less than 60MiB.
bs: /var Veličina mora biti numerička i ne smije biti manja od 60MiB.

en: 10.20.0.0/16 Office network
bs: 10.20.0.0/16 Office mreža

en: 192.168.1.254 Home router
bs: 192.168.1.254 Kućni router

en: 1992-2016 The FreeBSD Project. All rights reserved.
bs: 1992-2016 The FreeBSD Project. Sva prava zadržana.

en: 1999-2016 The PHP Group. All rights reserved.
bs: 1999-2016 The PHP Group. Sva prava zadržana.

en: 3 (recommended)
bs: 3 (preporučeno)

en: 4000:4099 Description of a port range
bs: 4000:4099 Opis port intervala

en: 6 hex octets separated by colons
bs: 6 hex octeti razdvojeni zarezima

en: 6RD Border Relay must be an IPv4 address.
bs: 6ti granični relay mora biti IPv4 adresa.

en: 6RD Configuration
bs: 6RD Konfiguracija

en: 6RD IPv4 Prefix length
bs: 6RD IPv4 Prefix dužina

en: 6RD IPv4 prefix length. Normally specified by the ISP. A value of 0 means embed the entire IPv4 address in the 6RD prefix.
bs: 6RD IPv4 Prefix dužina. Često specificirana ISPom. Vrijednost 0 znači da se ugradi cijela IPv4 adresa u 6RD prefiks.

en: 6rd Tunnel
bs: 6ti Tunel

en: 6to4 Tunnel
bs: 6to4 Tunel

en: 802.11g OFDM Protection Mode
bs: 802.11g OFDM Način zaštite

en: 802.11g only
bs: 802.11g samo

en: 802.11n standards require enabling WME.
bs: 802.11n standardi zahtijevaju uključivanje WME.

en: 802.1Q VLAN Priority (between 0 and 7).
bs: 802.1Q VLAN Prioritet (između 0 i 7).

en: 802.1Q VLAN tag (between 1 and 4094).
bs: 802.1Q VLAN tag (između 1 i 4094).

en: 802.1X Authentication Server Port must be a valid port number (1-65535).
bs: 802.1X Autentikacijski server port mora biti validan port broj (1-65535).

en: 802.1X Authentication Server must be an IP or hostname.
bs: 802.1X Autentikacijski server mora biti IP ili hostname.

en: 802.1x RADIUS Options
bs: 802.1x RADIUS Opcije

en: <i>Error in version information</i>
bs: <i>Greška u informacijama o verziji</i>

en: <i>Unable to check for updates</i>
bs: <i>Nemoguće provjeriti ažuriranja</i>

en: <span class="help-block">This is associated with a NAT rule.<br/>Editing the interface, protocol, source, or destination of associated filter rules is not permitted.
bs: <span class="help-block">Ovo je asocirano sa NAT pravilom.<br/>Modifikovanje interfejsa, protokola, izvora ili destinacije asociranih filter pravila nije dopušteno.

en: <span id="ldaptestop">Testing pfSense LDAP settings... One moment please...
bs: <span id="ldaptestop">Testiranje pfSense LDAP postavki... Jedan trenutak molim....

en: ===== Non-Server Certificates =====
bs: ===== Non Server Certifikati  =====

en: ===== Server Certificates =====
bs: ===== Server Certifikati  =====

en: A Backend for Authentication must be selected if the server mode requires User Auth.
bs: Backend autentikacija mora biti selektovana ako serverski način zahtijeva korisničku autentikaciju.

en: A CARP parent interface can only be used with IP Alias type Virtual IPs.
bs: CARP roditeljski interface može biti korišten sa IP alias tipom Virtualnih IPova.

en: A CARP password that is shared between the two VHID members must be specified.
bs: CARP password koji je dijeljen između dva VHID člana mora biti specificiran.

en: A DNS server must be configured in %1$sSystem: General Setup %2$sor allow the DNS server list to be overridden by DHCP/PPP on WAN for dynamic DNS updates to work.
bs: DNS server mora biti konfigurisan u %1$sSistem: Generalne postavke%2$s ili dozvoliti DNS listi servera da mogu biti overrideani preko DHCP/PPP na WANu da bi ažuriranja dinamičkog DNSa funkcionisala.

en: A Fall Back Pool cannot be selected when using the DNS relay protocol.
bs: Fall Back Pool ne može biti selektovan kada se koristi DNS relay protokol.

en: A GPS connected via a serial port may be used as a reference clock for NTP. If the GPS also supports PPS and is properly configured, and connected, that GPS may also be used as a Pulse Per Second clock reference. NOTE: A USB GPS may work, but is not recommended due to USB bus timing issues.<br />For the best results, NTP should have at least three sources of time. So it is best to configure at least 2 servers under <a href="services_ntpd.php">Services > NTP > Settings</a> to minimize clock drift if the GPS data is not valid over time. Otherwise ntpd may only use values from the unsynchronized local clock when providing time to clients.
bs: GPS spojen preko serijskog porta može biti korišten kao referentni sat za NTP. Ako GPS također podržava PPS i pravilno je konfigurisan i spojen, GPS može biti korišten kao Pulse po sekundi satna refernca. NAPOMENA: USB GPS može raditi ali nije preporučljivo zbog problema sa tajmiranjem USB busa. <br />Za najbolje rezultate, NTP bi trebao imati barem tri izvora u datom trenutku. Tako da je najbolje konfigurisati barem 2 servera pod <a href="services_ntpd.php">Servisi > NTP > Postavke</a> za minimiziranje odstupanja sata ako GPS podaci nisu validni u toku vremena. Inače ntpd može koristiti vrijednosti sa nesinhroniziranog lokalnog sata kada treba dati vrijeme klijentu.

en: A GRE tunnel with the network %s is already defined.
bs: GRE tunnel sa mrežom %s je već definisan.

en: A IPv4 subnet can not be over 32 bits.
bs: IPv4 subnet ne može imati preko 32 bita.

en: A NTP Time Server name may only contain the characters a-z, 0-9, '-' and '.'.
bs: NTP ime vremenskog servera može sadržavati samo znakove a-z, 0-9, '-' i '.'.

en: A NetBIOS Scope ID provides an extended naming service for NetBIOS over TCP/IP. The NetBIOS scope ID isolates NetBIOS traffic on a single network to only those nodes with the same NetBIOS scope ID
bs: NetBIOS Scope ID daje proširen servis imenovanja NetBIOS-a preko TCP/IP. NetBIOS scope ID izolira NetBIOS promet na jedinstvenu mrežu sa onim čvorovima koji imaju isti NetBIOS scope ID.

en: A NetBIOS Scope ID provides an extended naming service for NetBIOS over TCP/IP. The NetBIOS scope ID isolates NetBIOS traffic on a single network to only those nodes with the same NetBIOS scope ID.
bs: NetBIOS Scope ID omogućava prošireni servis imenovanja za NetBIOS preko TCP/IP. NetBIOS scope ID izolira netBIOS promet na jednoj mreži od samo onih čvorova sa istim NetBIOS scope IDom.

en: A Prefix range can be defined here for DHCP Prefix Delegation. This allows for assigning networks to subrouters. The start and end of the range must end on boundaries of the prefix delegation size.
bs: Prefiksni domet može biti definisan ovdje za DHCP prefiksnu delegaciju. Ovo dozvoljava dodjelu mreža subrouterima. Početak i kraj dometa moraju biti na granicama veličine delegacijskog prefiksa.

en: A QinQ VLAN exists on %s with this tag. Please remove it to use this tag for a normal VLAN.
bs: QinQ VLAN već postoji na %s sa ovim tagom. Molimo uklonite ga za normalan VLAN.

en: A Schedule with this name already exists.
bs: Raspored sa ovim imenom već postoji.

en: A System Domain Local Zone Type of "redirect" is not compatible with dynamic DHCP Registration.
bs: Sistemski Domen Lokalna Zona Tip redirekcije nije kompatibilan sa dinamičkom DHCP Registracijom.

en: A TLS key enhances security of an OpenVPN connection by requiring both parties to have a common key before a peer can perform a TLS handshake. This layer of HMAC authentication allows control channel packets without the proper key to be dropped, protecting the peers from attack or unauthorized connections.The TLS Key does not have any effect on tunnel data.
bs: TLS ključ pojačava sigurnost OpenVPN konekcije tako što zahtijeva od obje strane da imaju zajednički ključ prije no peer može izvršiti TLS handshake. Ovaj red/sloj HMAC autentikacije dozvoljava kontrolu paketa za kanal bez bacanja odgovarajućeg ključa, štiteći peerove od napada ili neautorizovanih konekcija. TLS ključ nema uticaja na tunnel podatke.

en: A VLAN with the tag %s is already defined on this interface.
bs: VLAN sa tagom %s je već definisan na ovom interfaceu.

en: A WPA Passphrase must be specified when WPA PSK is enabled.
bs: WPA pass fraza mora biti specificirana kada je WPA PSK uključen.

en: A bridge interface cannot be a member of a bridge.
bs: Bridge interfacea ne može biti član bridgea

en: A child queue cannot be named the same as a parent limiter.
bs: Red dijete ne može dobiti ime kao roditelj limiter.

en: A communications error occurred while attempting XMLRPC sync with %s (pfsense.%s).
bs: Komunkacijska greška se desila dok se pokušavala XMLRPC sinhronizacija %s (pfsense.%s).

en: A cryptographic accelerator module will use hardware support to speed up some cryptographic functions on systems which have the chip. Loading the BSD Crypto Device module will allow access to acceleration devices using drivers built into the kernel, such as Hifn or ubsec chipsets. If the firewall does not contain a crypto chip, this option will have no effect. To unload the selected module, set this option to "none" and then reboot.
bs: Kriptografski akceleratorski modul će koristiti hardversku podršku za ubrzavanje nekih kriptografskih funkcija na sistemima koji imaju čip. Učitavanjem BSD Crypto Uređajnog modula ćete dozvoliti pristup akceleracijskim uređajima koristeći drajvere koji su ugrađeni u kernel, kao Hifn ili ubsec chipsetove. Ako firewall ne sadrži crypto čip, ova opcija neće imati nikakvog efekta. Da ponovo učitate selektovani modul, postavite ovu opciju na "none" i zatim ponovo pokrenite.

en: A description for administrative reference (not parsed).
bs: Opis za administrativnu referencu (nije proslijeđen).

en: A description may be entered here for administrative reference (not parsed)
bs: Opis može biti unesen ovdje radi administrativne reference (nije proslijeđen)

en: A description may be entered here for administrative reference (not parsed).
bs: Opis mora biti unesen ovdje zbog administrativne reference (ne prosljeđuje se).

en: A description may be entered here for administrative reference (not parsed).
bs: Opis može biti unesen ovdje zbog administrativne reference (nije proslijeđena).

en: A description may be entered here for administrative reference.
bs: Opis može biti unesen ovdje za administrativnu referencu.

en: A description may be entered here for administrative reference. A maximum of %s characters will be used in the ruleset and displayed in the firewall log.
bs: Opis može biti unesen ovdje zbog administrativne reference. Maksimum %s znakova će biti korišteno u setu pravila i prikazano u firewall logu.

en: A description may be entered here for administrative reference. Description will appear in the "Interfaces Assign" select lists.
bs: Opis može biti unesen ovdje zbog administrativne reference. Opis će se pojaviti u listi "Dodijeljeni interfejsi"

en: A description may be entered here for reference (not parsed).
bs: Opis može biti unesen ovdje radi reference (nije proslijeđen).

en: A file with the name '%s' already exists.
bs: Fajl sa imenom '%s' već postoji.

en: A full configuration restore was selected but a %s tag could not be located.
bs: Puno konfiguracijsko vraćanje je selektovano ali %s tag nije mogao biti pronađen.

en: A gateway can not be assigned to DNS '%s' server which is on a directly connected network.
bs: Gateway ne može biti dodijeljen DNS '%s' serveru koji je na direktno spojenoj mreži.

en: A gateway group cannot have the same name as a gateway "%s" please choose another name.
bs: Gateway grupa ne može imati isto ime kao gateway "%s", molimo odaberite drugo ime.

en: A gateway group with this name "%s" already exists.
bs: Gateway grupa sa imenom "%s" već postoji.

en: A gif with the network %s is already defined.
bs: Gif sa mrežom %s je već definisan

en: A group description may be entered here for administrative reference (not parsed).
bs: Opis grupe se može unijeti ovdje zbog administrativne reference (ne prosljeđuje se).

en: A higher baud rate is generally only helpful if the GPS is sending too many sentences. It is recommended to configure the GPS to send only one sentence at a baud rate of 4800 or 9600.
bs: Veći baud odnos je inače od pomoći ako GPS šalje previše rečenica. Preporučeno je da konfiguripete GPS da šalje samo jednu rečenicu sa baud odnosom od 4800 ili 9600.

en: A longer time period will provide smoother results for round trip time and loss, but will increase the time before a latency or loss alert is triggered.
bs: Duži vremenski period će omogućiti preciznije rezultate za povratno vrijeme i gubitak, ali će povećati vrijeme prije latencije ili aktiviranja signala gubitka.

en: A member interface passed does not exist in configuration
bs: Član interfacea koji je proslijeđen ne egzistira u konfiguraciji

en: A network type address cannot be configured for NAT while only an address type is selected for local source.
bs: Mrežni tip adrese ne može biti konfigurisan za NAT dok je samo tip adrese selektovan za lokalni izvor.

en: A normal VLAN exists with this tag please remove it to use this tag for QinQ first level.
bs: Normalni VLAN postoji sa ovim tagom, molimo uklonite ga da koristite ovaj tag za prvi nivo QinQ-a.

en: A numeric value must be specified for DPD delay.
bs: Numerička vrijednost mora biti specificirana za DPD odgađanje.

en: A numeric value must be specified for DPD retries.
bs: Numerička vrijednost mora biti specificirana za DPD ponavljanja.

en: A numeric value must be specified for TFC bytes.
bs: Numerička vrijednost mora biti specificirana za TFC bajte.

en: A packet can be matched on a mark placed before on another rule.
bs: Paket može biti poklopljen sa oznakom koja je postavljena ranije na nekom pravilu.

en: A packet matching this rule can be marked and this mark used to match on other NAT/filter rules. It is called %1$sPolicy filtering%2$s.
bs: Paket koji se poklapa sa ovim pravilom može biti označen i korišten za označavanje na ostalim NAT/filter pravilima. Zove se %1$sPolicy filtriranje%2$s.

en: A password for decryption must be supplied and confirmed.
bs: Lozinka za dekripciju mora biti napisana i potvrđena

en: A password for encryption must be supplied and confirmed.
bs: Lozinka za enkripciju mora biti napisana i potvrđena

en: A queue and a virtual interface cannot be selected for IN and Out. Both must be from the same type.
bs: Red i virtualni interface ne mogu biti selektovani za U i IZ. Oboje moraju biti istog tipa.

en: A queue must be selected for the In direction before selecting one for Out too.
bs: Red mora biti selektovan za U direkciju prije biranja direkcije za Iz.

en: A queue must be selected when an acknowledge queue is also selected.
bs: Red mora biti označen kada je potvrđeni red selektovan.

en: A remote server error occurred adding a new record.
bs: Greška udaljenog servera se pojavila prilikom dodavanja unosa.

en: A remote server error occurred loading the zone.
bs: Greška udaljenog servera se pojavila prilikom učitavanja zone.

en: A remote server error occurred removing an existing record.
bs: Greška udaljenog servera se pojavila prilikom uklanjanja postojećeg unosa.

en: A remote server error occurred updating the zone.
bs: Greška udaljenog servera se pojavila prilikom ažuriranja zone.

en: A roll has at least one voucher and less than %s.
bs: Roll ima bar jedan vaučer i manje od %s.

en: A route to these destination networks already exists
bs: Ruta ka ovim destinacijskim mrežama već postoji.

en: A schedule needs to be specified for every additional entry.
bs: Raspored mora biti specificiran za svaki dodatni unos.

en: A shorter probe interval will decrease the time required before a latency or loss alert is triggered, but will use more network resource. Longer probe intervals will degrade the accuracy of the quality graphs.
bs: Kraći interval testiranja će smanjiti vrijeme potrebno prije latencije ili aktiviranja signala gubitkaali će koristiti više mrežnih resursa. Duži intervali testiranja će degradirati preciznost kvaliteta grafova.

en: A specific channel, not auto, must be selected for Access Point mode.
bs: Specifični kanal, ne automatski, mora biti selektovan za način pristupne tačke.

en: A test notification will be sent even if the service is marked as disabled.
bs: Test notifikacija će biti poslana iako je servis označen kao ugašen.

en: A test notification will be sent even if the service is marked as disabled.  The last SAVED values will be used, not necessarily the values entered here.
bs: Test notifikacija će biti poslana iako je servis označen kao isključen. Posljednje SPAŠENE vrijednosti će biti korištene, ne nužno vrijednosti ovdje unesene.

en: A user with this name already exists. Add the key to the user instead.
bs: Korisnik sa ovim imenom već postoji. Dodajte ključ korisniku umjesto željene radnje.

en: A username and password must be specified.
bs: Korisničko ime i lozinka moraju biti specificirani

en: A valid DUID must be specified
bs: Validan DUID mora biti specificiran

en: A valid DUID must be specified.
bs: Validan DUID mora biti specificiran.

en: A valid Dynamic DNS address for 'My identifier' must be specified.
bs: Validna dinamička DNS adresa za 'Moj identifikator' mora biti specificirana.

en: A valid FQDN for 'My identifier' must be specified.
bs: Validan FQDN za 'Moj identifikator' mora biti specificiran.

en: A valid FQDN for 'Peer identifier' must be specified.
bs: Validan FQDN za 'Peer Identifikator' mora biti specificiran.

en: A valid Hostname must be specified. [%s]
bs: Validan hostname mora biti specificiran. [%s]

en: A valid IP address and port must be specified, for example 192.168.100.10@5353.
bs: Validna IP adresa i port moraju biti specificirani, npr. 192.168.100.10@5353.

en: A valid IP address for 'DNS Server #1' must be specified.
bs: Validna IP adresa za 'DNS Server #1' mora biti specificirana.

en: A valid IP address for 'DNS Server #2' must be specified.
bs: Validna IP adresa za 'DNS Server #2' mora biti specificirana.

en: A valid IP address for 'DNS Server #3' must be specified.
bs: Validna IP adresa za 'DNS Server #3' mora biti specificirana.

en: A valid IP address for 'DNS Server #4' must be specified.
bs: Validna IP adresa za 'DNS Server #4' mora biti specificirana.

en: A valid IP address for 'My identifier' must be specified.
bs: Validna IP adresa za 'Moj identifikator' mora biti specificirana.

en: A valid IP address for 'Peer identifier' must be specified.
bs: Validna IP adresa za 'Peer Identifikator' mora biti specificirana.

en: A valid IP address for 'Virtual Address Pool Network' must be specified.
bs: Validna IP adresa za 'Pool mreže virtualnih adresa' mora biti specificirana.

en: A valid IP address for 'WINS Server #1' must be specified.
bs: Validna IP adresa za 'WINS Server #1' mora biti specificirana.

en: A valid IP address for 'WINS Server #2' must be specified.
bs: Validna IP adresa za 'WINS Server #2' mora biti specificirana.

en: A valid IP address must be entered for each row under Networks.
bs: Validna IP adresa mora biti unesena za svaki red pod menijem Mreže.

en: A valid IP address must be entered for row %s under Networks.
bs: Validna IP adresa mora biti unesena za red %s u kartici Mreže.

en: A valid IP address must be specified for DNS server %s.
bs: Validna IP adresa mora biti specificirana za DNS server %s.

en: A valid IP address must be specified for each of the DNS servers.
bs: Validna IP adresa mora biti specificirana za svaki od DNS servera.

en: A valid IP address must be specified for the gateway.
bs: Validna IP adresa mora biti specificirana za gateway.

en: A valid IP address must be specified for the network boot server.
bs: Validna IP adresa mora biti specificirana za mrežni boot server.

en: A valid IP address must be specified for the primary/secondary WINS servers.
bs: Validna IP adresa mora biti specificirana za primarni/sekundarni WINS server.

en: A valid IP address must be specified, for example 192.168.100.10.
bs: Validna IP adresa mora biti specificirana, npr 192.168.100.10.

en: A valid IP address must be specified, or # for an exclusion or ! to not forward at all.
bs: Validna IP adresa mora biti specificirana, ili # za isključenje ili ! da se uopšte ne forwarda.

en: A valid IP address must be specified.
bs: Validna IP adresa mora biti specificirana.

en: A valid IP address must be specified. [%s]
bs: Validna IP adresa mora biti specificirana. [%s]

en: A valid IP address or hostname must be specified for the primary/secondary NTP servers.
bs: Validna IP adresa ili hostname moraju biti specificirani za primarne/sekundarne NTP servere.

en: A valid IP address, CIDR block, or MAC address must be specified. [%s]
bs: Validna IP adresa, CIDR blok ili MAC adresa mora biti specificirana. [%s]

en: A valid IP address, hostname or URL must be specified for the TFTP server.
bs: Validna IP adresa, hostname ili URL moraju biti specificirani za TFTP server.

en: A valid IP address/hostname or IP/hostname:port must be specified for remote syslog server #1.
bs: Validna IP adresa/hostname ili IP/hostname:port moraju biti specificirani za udaljeni syslog server #1.

en: A valid IP address/hostname or IP/hostname:port must be specified for remote syslog server #2.
bs: Validna IP adresa/hostname ili IP/hostname:port moraju biti specificirani za udaljeni syslog server #2.

en: A valid IP address/hostname or IP/hostname:port must be specified for remote syslog server #3.
bs: Validna IP adresa/hostname ili IP/hostname:port moraju biti specificirani za udaljeni syslog server #3.

en: A valid IPV4 address must be specified for each of the DNS servers.
bs: Validna IPv4 adresa mora biti specificirana za svaki od DNS servera.

en: A valid IPv4 address must be specified for range from.
bs: Validna IPv4 adresa mora biti specificirana za interval od.

en: A valid IPv4 address must be specified for range to.
bs: Validna IPv4 adresa mora biti specificirana za interval do.

en: A valid IPv4 address must be specified for the gateway.
bs: Validna IPv4 adresa mora biti specificirana za gateway.

en: A valid IPv4 address must be specified for the network boot server.
bs: Validna IPv4 adresa mora biti specificirana za mrežni boot server.

en: A valid IPv4 address must be specified for the primary/secondary NTP servers.
bs: Validna IPv4 adresa mora biti specificirana za primarne/sekundarne NTP servere.

en: A valid IPv4 address must be specified for the primary/secondary WINS servers.
bs: Validna IPv4 adresa mora biti specificirana za primarne/sekundarne WINS servere.

en: A valid IPv4 address must be specified for use with static ARP.
bs: Validna IPv4 adresa mora biti specificirana za korištenje sa static ARPom

en: A valid IPv4 address must be specified.
bs: Validna IPv4 adresa mora biti specificirana.

en: A valid IPv4 address, hostname or URL must be specified for the TFTP server.
bs: Validna IPv4 adresa, host ime ili URL moraju biti specificirani za TFTP server.

en: A valid IPv4 gateway must be specified.
bs: Validan IPv4 gateway mora biti specificiran.

en: A valid IPv4 netmask must be entered for IPv4 row %s under Networks.
bs: Validna IPv4 netmaska mora biti unesena za IPv4 red %s pod Mreže.

en: A valid IPv4 netmask must be entered for each IPv4 row under Networks.
bs: Validna IPv4 netmaska mora biti unesena za svaki IPv4 red pod menijem Mreže.

en: A valid IPv4 or IPv6 destination network must be specified.
bs: Validna IPv4 ili IPv6 destinacijska mreža mora biti specificirana.

en: A valid IPv6 address for 'Virtual IPv6 Address Pool Network' must be specified.
bs: Validna IPv6 adresa za 'Pool mreže virtualnih IPv6 adresa' mora biti specificiran.

en: A valid IPv6 address must be specified for each of the DNS servers.
bs: Validna IPv6 adresa mora biti specificirana za svaki od DNS servera.

en: A valid IPv6 address must be specified for the gateway.
bs: Validna IPv6 adresa mora biti specificirana za gateway.

en: A valid IPv6 address must be specified for the primary/secondary NTP servers.
bs: Validna IPv6 adresa mora biti specificirana za primarne/sekundarne NTP servere.

en: A valid IPv6 address must be specified.
bs: Validna IPv6 adresa mora biti specificirana.

en: A valid IPv6 address or hostname must be specified for the TFTP server.
bs: Validna IPv6 adresa ili host ime moraju biti specificirani za TFTP server.

en: A valid IPv6 gateway must be specified.
bs: Validan IPv6 gateway mora biti specificiran.

en: A valid IPv6 netmask must be entered for IPv6 row %s under Networks.
bs: Validna IPv6 netmaska mora biti unesena za IPv6 red %s pod Mreže.

en: A valid IPv6 netmask must be entered for each IPv6 row under Networks.
bs: Validna IPv6 netmaska mora biti unesena za svaki IPv6 red pod menijem Mreže.

en: A valid MAC address must be specified for use with static ARP.
bs: Validna MAC adresa mora biti specificirana za korištenje sa static ARPom.

en: A valid MAC address must be specified.
bs: Validna MAC adresa mora biti specificirana.

en: A valid MAC address must be specified. [%s]
bs: Validna MAC adresa mora biti specificirana. [%s]

en: A valid NAT local network IP address must be specified.
bs: Validna lokalna IP adresa NAT-a mora biti specificirana.

en: A valid NAT local network IPv4 address must be specified or Mode needs to be changed to IPv6
bs: Validna lokalna mrežna IPv4 adresa NAT-a mora biti specificirana ili Način mora biti promijenjen u IPv6

en: A valid NAT local network IPv6 address must be specified or Mode needs to be changed to IPv4
bs: Validna lokalna mrežna IPv6 adresa NAT-a mora biti specificirana ili Način mora biti promijenjen u IPv4

en: A valid NAT local network bit count must be specified.
bs: Validan brojač bitova NAT lokalne mreže mora biti specificiran.

en: A valid PPPoE reset date must be specified (mm/dd/yyyy).
bs: Validan reset datuma za PPPoE mora biti specificiran (mm/dd/yyyy).

en: A valid PPPoE reset day of month must be specified (1-31) in the Custom PPPoE Periodic reset fields. No checks are done on valid # of days per month
bs: Validan reset dana za PPPoE mora biti specificiran (1-31) u Custom poljima PPPoE periodičnog reseta. Ne vrše se provjere na broju validnih dana po mjesecu

en: A valid PPPoE reset hour must be specified (0-23).
bs: Validan reset sat za PPPoE mora biti specificiran (0-23).

en: A valid PPPoE reset minute must be specified (0-59).
bs: Validan reset minuta za PPPoE mora biti specificiran (0-59).

en: A valid PPPoE reset month must be specified (1-12) in the Custom PPPoE Periodic reset fields.
bs: Validan reset mjeseci za PPPoE mora biti specificiran (1-12) u Custom poljima PPPoE periodičnog reseta.

en: A valid PPPoE reset year must be specified. Don't select a year in the past!
bs: Validna PPPoE godina resetovanja mora biti specificirana. Ne birajte godinu iz prošlosti!

en: A valid PPTP local IP address must be specified.
bs: Validna lokalna PPTP IP adresa mora biti specificirana.

en: A valid PPTP remote IP address must be specified.
bs: Validna udaljena PPTP IP adresa mora biti specificirana.

en: A valid PPTP subnet bit count must be specified.
bs: Validan PPTP brojač bita za subnet mora biti specificiran.

en: A valid RADIUS server address must be specified.
bs: Validna RADIUS server adresa mora biti specificirana.

en: A valid RADIUS server must be selected for user authentication on the Mobile Clients tab in order to set EAP-RADIUS as the authentication method.
bs: Validan RADIUS server mora biti selektovan za korisničku autentikaciju na kartici mobilni klijenti za postavljanje EAP-RADIUS kao metode autentikacije.

en: A valid URL must be provided.
bs: Validan URL mora biti napisan.

en: A valid URL must be provided. Could not fetch usable data from '%s'.
bs: Validan URL mora biti napisan. Nemoguće doći do upotrebljivih podataka sa '%s'.

en: A valid URL must be specified for the network bootfile.
bs: Validan URL mora biti specificiran za network bootfajl.

en: A valid User FQDN in the form of user@my.domain.com for 'My identifier' must be specified.
bs: Validan korisnički FQDN u formi user@my.domain.com za 'Moj identifikator' mora biti specificiran.

en: A valid User FQDN in the form of user@my.domain.com for 'Peer identifier' must be specified.
bs: Validan korisnički FQDN u formi user@my.domain.com za 'Peer Identifikator' mora biti specificiran.

en: A valid alias IP address must be specified.
bs: Validna alias IP adresa mora biti specificirana.

en: A valid alias hostname is specified, but the domain name part should be omitted
bs: Validan alias hostname je specificiran ali dio imena domena mora biti izostavljen

en: A valid alias subnet bit count must be specified.
bs: Validan alias subnet brojač bitova mora biti specificiran.

en: A valid consumer name must be supplied
bs: Validno korisničko ime mora biti specificirano

en: A valid data payload must be specified.
bs: Validna nosivost podataka mora biti specificirana.

en: A valid destination bit count must be specified.
bs: Validan destinacijski bit brojač mora biti specificiran.

en: A valid destination must be specified.
bs: Validna destinacija mora biti specificirana.

en: A valid destination network bit count must be specified.
bs: Validan destinacijski bit brojač mreže mora biti specificiran.

en: A valid domain must be specified after _msdcs.
bs: Validna domena mora biti specificirana nakon _msdcs.

en: A valid domain must be specified in alias list.
bs: Validna domena mora biti specificirana u alias listi.

en: A valid domain must be specified.
bs: Validna domena mora biti specificirana.

en: A valid domain name for 'My identifier' must be specified.
bs: Validno ime domene za 'Moj identifikator' mora biti specificirano.

en: A valid domain name for 'Peer identifier' must be specified.
bs: Validno ime domene za 'Peer Identifikator' mora biti specificirano.

en: A valid domain name must be specified for the DNS domain.
bs: Validno ime domene mora biti specificirano za DNS domenu.

en: A valid domain name must be specified for the dynamic DNS registration.
bs: Validno ime domene mora biti specificirano za dinamičku DNS registraciju.

en: A valid domain search list must be specified.
bs: Validna domen lista traženja mora biti specificirana.

en: A valid gateway IP address OR hostname must be specified for %s.
bs: Validna gateway IP adresa ili hostname moraju biti specificirani za %s.

en: A valid gateway IP address must be specified.
bs: Validna gateway IP adresa mora biti specificirana.

en: A valid gateway group name must be specified.
bs: Validno ime gateway grupe mora biti specificirano.

en: A valid gateway must be specified.
bs: Validan gejtvej mora biti specificiran.

en: A valid hexadecimal number must be entered for the IPv6 prefix ID.
bs: Validan heksadecimalni broj mora biti unesen za IPv6 prefiksni ID.

en: A valid hostname is specified, but the domain name part should be omitted
bs: Validno host ime je specificirano, ali dio imena domene treba biti izostavljeno

en: A valid ikeid must be specified.
bs: Validan ikeid mora biti specificiran.

en: A valid interface must be specified.
bs: Validan interface mora biti specificiran.

en: A valid interface to track must be selected.
bs: Validan interface za praćenje mora biti selektovan.

en: A valid internal bit count must be specified.
bs: Validan interni bit brojač mora biti specificiran.

en: A valid ip could not be found!
bs: Validan ip nije pronađen!

en: A valid lifetime below 2 hours will be ignored by clients (RFC 4862 Section 5.5.3 point e)
bs: Validan životni vijek ispod 2 sata će biti ignorisan od strane klijenata (RFC 4862 Section 5.5.3 point e)

en: A valid local IP address must be specified for %s.
bs: Validna lokalna IP adresa mora biti specificirana za %s.

en: A valid local network IP address must be specified.
bs: Validna lokalna mrežna IP adresa mora biti specificirana.

en: A valid local network IPv4 address must be specified or Mode needs to be changed to IPv6
bs: Validna lokalna mrežna IPv4 adresa mora biti specificirana ili se Način treba prebaciti u IPv6.

en: A valid local network IPv6 address must be specified or Mode needs to be changed to IPv4
bs: Validna lokalna mrežna IPv6 adresa mora biti specificirana ili se Način treba prebaciti u IPv4.

en: A valid local network bit count must be specified.
bs: Validan brojač bitova lokalne mreže mora biti specificiran.

en: A valid mirror name must be supplied.
bs: Validno ime mirrora mora biti specificirano.

en: A valid port must be supplied for the NAT port entry.
bs: Validan port mora biti dostavljen unosu NAT porta.

en: A valid port number must be specified
bs: Validan port broj mora biti specificiran

en: A valid port number must be specified.
bs: Validan port broj mora biti specificiran.

en: A valid port number must be specified. [%s]
bs: validan port broj mora biti specificiran. [%s]

en: A valid port or port alias must be supplied for the destination port entry.
bs: Validan port ili port alias mora biti dostavljen unosu destinacijskog porta.

en: A valid port or port alias must be supplied for the source port entry.
bs: Validan port ili port alias mora biti dostavljen unosu izvornog porta.

en: A valid prefix range must be specified.
bs: Validan prefiksni domet mora biti specificiran.

en: A valid primary domain name server IP address must be specified for the dynamic domain name.
bs: Validno primarno ime domene IP adrese mora biti specificirano za dinamičko ime domene.

en: A valid primary domain name server IPv4 address must be specified for the dynamic domain name.
bs: Validno primarno ime domene servera sa IPv4 adresom mora biti specificirano za dinamičko ime domene.

en: A valid range must be specified.
bs: Validan domet mora biti specificiran

en: A valid remote gateway IPv4 address must be specified or protocol needs to be changed to IPv6
bs: Validna zadana udaljena IPv4 adresa gejtveja mora biti specificirana ili protokol mora biti promijenjen na IPv6

en: A valid remote gateway IPv6 address must be specified or protocol needs to be changed to IPv4
bs: Validna zadana udaljena IPv6 adresa gejtveja mora biti specificirana ili protokol mora biti promijenjen na IPv4

en: A valid remote gateway address or host name must be specified.
bs: Zadana udaljena gejtvej adresa ili host ime mora biti specificirano.

en: A valid remote network IP address must be specified.
bs: Validna IP adresa udaljene mreže mora biti specificirana.

en: A valid remote network IPv4 address must be specified or Mode needs to be changed to IPv6
bs: Validna IPv4 adresa udaljene mreže mora biti specificirana ili Način mora biti promijenjen u IPv6

en: A valid remote network IPv6 address must be specified or Mode needs to be changed to IPv4
bs: Validna IPv6 adresa udaljene mreže mora biti specificirana ili Način mora biti promijenjen u IPv4

en: A valid remote network bit count must be specified.
bs: Validan bit brojač udaljene mreže mora biti specificiran.

en: A valid remote start address must be specified.
bs: Validna udaljena startna adresa mora biti specificirana.

en: A valid rule type is not selected.
bs: Validan tip pravila nije selektovan.

en: A valid server address must be specified.
bs: Validna adresa servera mora biti specificirana.

en: A valid source bit count must be specified.
bs: Validan izvor mora biti naveden.

en: A valid source must be specified.
bs: Validan izvor mora biti specificiran

en: A valid split DNS domain list must be specified.
bs: Validno razdvajanje DNS liste domena mora biti specificirano.

en: A valid subnet bit count must be specified.
bs: Validan brojač subnet bita mora biti specificiran.

en: A valid subnet mask must be specified
bs: Validna subnet maska mora biti specificirana

en: A valid target IP address must be specified.
bs: Validna tražena IP adresa mora biti specificirana.

en: A valid target IP must be specified when using the 'Other Subnet' type.
bs: Validna tražena IP adresa mora biti specificirana kada se koristi tip 'Drugi subnet'.

en: A valid target bit count must be specified when using the 'Other Subnet' type.
bs: Validan brojač bitova mora biti specificiran kada se koristi tip 'Drugi subnet'

en: A valid value for 'DNS Default Domain' must be specified.
bs: Validna vrijednost za 'DNS zadanu domenu' mora biti specificirana.

en: A valid value for 'Login Banner' must be specified.
bs: Validna vrijednost za 'Login banner' mora biti specificirana.

en: A valid value for Message Cache Size must be specified.
bs: Validna vrijednost za veličinu keša poruka mora biti specificirana.

en: A valid value must be specified for %s debug.
bs: Validna vrijednost mora biti specificirana za %s debagiranje.

en: A valid value must be specified for EDNS Buffer Size.
bs: Validna vrijednost mora biti specificirana za EDNS buffer veličinu

en: A valid value must be specified for Incoming TCP Buffers.
bs: Validna vrijednost mora biti specificirana za dolazeće TCP buffere.

en: A valid value must be specified for Jostle Timeout.
bs: Validna vrijednost mora biti specificirana za Jostle Timeout.

en: A valid value must be specified for Log Level.
bs: Validna vrijednost mora biti specificirana za log nivo.

en: A valid value must be specified for Number of Hosts to Cache.
bs: Validna vrijednost mora biti specificirana za broj hostova za keširanje.

en: A valid value must be specified for Number of Queries per Thread.
bs: Validna vrijednost mora biti specificirana za broj upita po threadu.

en: A valid value must be specified for Outgoing TCP Buffers.
bs: Validna vrijednost mora biti specificirana za odlazeće TCP buffere.

en: A valid value must be specified for TTL for Host Cache Entries.
bs: Validna vrijednost mora biti specificirana za TTL za Host keširane unose.

en: A valid value must be specified for Unwanted Reply Threshold.
bs: Validna vrijednost mora biti specificirana za neželjeni prag odgovaranja.

en: A valid webConfigurator port number must be specified
bs: Validan port broj za webConfigurator mora biti specificiran

en: AC Power
bs: AC Snaga

en: ACLs
bs: ACLovi

en: AES (recommended)
bs: AES (preporučeno)

en: AES-NI CPU-based Acceleration
bs: AES-NI CPU-bazira akceleracija

en: AHEAD of
bs: ISPRED u odnosu na

en: AMD K8, K10 and K11 CPU on-die thermal sensor
bs: AMD K8, K10 i K11 CPU on-die termalni senzor

en: ANY USER
bs: BILO KOJI KORISNIK

en: APN number (optional)
bs: APN broj (opcionalno)

en: ARP Handling
bs: ARP rukovanje

en: ARP Table
bs: ARP Tabela

en: ARP Table Static Entry
bs: ARP tablica statički unos

en: ASN encoding
bs: ASN enkodiranje

en: ASN.1 distinguished Name
bs: ASN.1 razlikovanje imena

en: Abort
bs: Obustavi

en: Abort Test
bs: Obustavi test

en: About this Page
bs: O ovoj stranici

en: Accept unencrypted ID and HASH payloads in IKEv1 Main Mode
bs: Prihvati neenkriptovane IDove i HASH payloadove u IKEv1 glavnom načinu rada

en: Acceptable usage policy
bs: Prihvatljiva usluga korištenja

en: Access Denied<br/><br/>Access attempt from a temporarily locked out client address.<br /><br />Try accessing the firewall again after the lockout expires.
bs: Pristup Onemogućen <br/><br/>Pokušaj pristupa sa trenutno zaključanog klijenta.<br /><br />Probajte pristupiti firewallu nakon što je period zaključavanja istekao.

en: Access List Name
bs: Ime pristupne liste

en: Access List name
bs: Ime pristupne liste

en: Access Lists
bs: Pristupne liste

en: Access Lists to Control Access to the DNS Resolver
bs: Pristupne liste za kontrolisanje pristupa DNS Resolvera

en: Access Point
bs: Pristupna tačka

en: Access Point Name
bs: Ime pristupne tačke

en: Access Point Name (APN)
bs: Ime pristupne tačke (APN)

en: Access denied!
bs: Pristup zabranjen!

en: Access granted for %d Minutes in total.
bs: Pristup dozvoljen za %d minuta ukupno.

en: Access list configured for DNS Resolver.
bs: Pristupna lista konfigurisana za DNS resolver.

en: Access list deleted from DNS Resolver.
bs: Lista pristupa obrisana sa DNS resolvera.

en: Account disabled due to violation of No-IP terms of service.
bs: Korisnički profil isključen zbog kršenja No-IP pravila korištenja.

en: Account revoked
bs: Korisnički nalog ukinut

en: Account suspended
bs: Korisnički nalog suspendovan

en: Accounting
bs: Računanje

en: Accounting Port
bs: Port preračunavanja

en: Accounting port
bs: Port preračunavanja

en: Accounting port (optional)
bs: Port računanja (neobavezan)

en: Accounting style
bs: Stil računanja

en: Accounting updates
bs: Ažuriranja preračunavanja

en: Accounts added here are also used for other parts of the system such as OpenVPN, IPsec, and Captive Portal.
bs: Akaunti dodani ovdje se također koriste za druge dijelove sistema kao OpenVPN, IPsec, kao i Sigurnosnog portala

en: Acknowledge queue and Queue cannot be the same.
bs: Potvrđeni red i Red ne mogu biti isto.

en: Ackqueue / Queue
bs: Ackqueue / Red

en: Act
bs: Čin

en: Action
bs: Radnja

en: Actions
bs: Akcije

en: Activated at
bs: Aktivirano na

en: Active
bs: Aktivno

en: Active Peer
bs: Aktivni peer

en: Active Tunnels
bs: Aktivni tuneli

en: Active Users
bs: Aktivni korisnici

en: Active Vouchers
bs: Aktivni vaučeri

en: Adaptive
bs: Adaptivni

en: Adaptive LZO Compression [Legacy style, comp-lzo adaptive]
bs: Adaptivna LZO Kompresija [Legacy style, comp-lzo adaptive]

en: Adaptive end
bs: Adaptivni kraj

en: Adaptive start
bs: Adaptivni start

en: Add
bs: Dodaj

en: Add Captive Portal Zone
bs: Dodaj zonu zabranjenog portala

en: Add DNS Server
bs: Dodaj DNS Server

en: Add Host
bs: Dodaj hosta

en: Add Host Name
bs: Dodaj host ime

en: Add Item to the Pool
bs: Dodaj stavku u pool

en: Add Network
bs: Dodaj mrežu

en: Add Option
bs: Dodaj opciju

en: Add P1
bs: Dodaj P1

en: Add P2
bs: Dodaj P2

en: Add Port
bs: Dodaj port

en: Add Privileges
bs: Dodaj privilegije

en: Add Schedule
bs: Dodaj raspored

en: Add Static Route
bs: Dodaj statičku rutu

en: Add Tag
bs: Dodaj tag

en: Add Time
bs: Dodaj vrijeme

en: Add URL
bs: Dodaj URL

en: Add URL Table
bs: Dodaj URL tablicu

en: Add WOL mapping
bs: Dodaj WOL mapiranje

en: Add Zone
bs: Dodaj zonu

en: Add a new NAT based on this one
bs: Dodaj novi NAT baziran na ovom

en: Add a new Phase 2 based on this one
bs: Dodaj novi Phase 2 baziran na ovom

en: Add a new gateway
bs: Dodaj novi gateway

en: Add a new item
bs: Dodaj novu stavku

en: Add a new mapping based on this one
bs: Dodaj novo mapiranje bazirano na ovom

en: Add alias
bs: Dodaj alias

en: Add an explicit static route for the remote inner tunnel address/subnet via the local tunnel address
bs: Dodaj eksplicitnu statičku rutu za udaljenu unutrašnju tunel adresu/subnet preko lokalne tunel adrese

en: Add associated filter rule
bs: Dodaj asocirano filter pravilo

en: Add mapping to the end of the list
bs: Dodaj mapiranje na kraj liste

en: Add mapping to the top of the list
bs: Dodaj mapiranje na vrh liste

en: Add network
bs: Dodaj mrežu

en: Add new Queue
bs: Dodaj novi red

en: Add new mapping to the end of the list
bs: Dodaj novo mapiranje na kraj liste

en: Add new mapping to the top of the list
bs: Dodaj novo mapiranje na vrh liste

en: Add or Import CRL
bs: Dodaj ili uvezi CRL

en: Add pool
bs: Dodaj pool

en: Add reverse dynamic DNS entries.
bs: Dodaj obrnute dinamičke DNS unose

en: Add rule to the end of the list
bs: Dodaj pravilo na dno liste

en: Add rule to the top of the list
bs: Dodaj pravilo na vrh liste

en: Add selected interface
bs: Dodaj selektovani interface

en: Add separator
bs: Dodaj separator

en: Add server
bs: Dodaj server

en: Add static mapping
bs: Dodaj statičko mapiranje

en: Add the interface named by interface as a span port on the bridge. Span ports transmit a copy of every frame received by the bridge. This is most useful for snooping a bridged network passively on another host connected to one of the span ports of the bridge. %1$s%2$sThe span interface cannot be part of the bridge member interfaces.%3$s
bs: Dodaj interface imenovan po interfaceu kao širenje porta na bridgeu. Širi portovi prenose kopiju svakog frejma koji bridge dobije. Ovo je najkorisnije za praćenje bridgeovane mreže pasivno na drugom hostu koji je spojen na jedan od širih portova bridgea. %1$s%2$sŠiri interface ne može biti dio bridge član interfacea.%3$s

en: Add to Mirror
bs: Dodaj na mirror

en: Add to block list
bs: Dodaj na blok listu

en: Add to pool
bs: Dodaj u pool

en: Add type-specific usage attributes to the signed certificate. Used for placing usage restrictions on, or granting abilities to, the signed certificate.
bs: Dodaj tip-specifične atribute korištenja na potpisani certifikat. Koristi se za postavljanje restrikcije korištenja ili davanje mogućnosti potpisanom certifikatu.

en: Add unassociated filter rule
bs: Dodaj neasocirano filter pravilo

en: Add user
bs: Dodaj korisnika

en: Add/Edit Load Balancer - Pool Entry
bs: Dodaj/Modifikuj Balanser Učitanih - Pool unos

en: Add/Sign
bs: Dodaj/potpiši

en: Add/Sign a New Certificate
bs: Dodaj/verifikuj novi certifikat

en: Added IPsec Pre-Shared Keys
bs: Dodani IPsec Ranije-Dijeljeni Ključevi

en: Added OpenVPN client specific override %1$s %2$s
bs: Dodan OpenVPN specifični klijent override %1$s %2$s

en: Added OpenVPN client to server %1$s:%2$s %3$s
bs: Dodan OpenVPN klijent serveru %1$s:%2$s %3$s

en: Added OpenVPN server on %1$s:%2$s %3$s
bs: Dodan OpenVPN server na %1$s:%2$s %3$s

en: Adding MAC addresses as "pass" MACs allows them access through the captive portal automatically without being taken to the portal page.
bs: Dodavajući MAC adrese kao "prolazne" MACove dozvoljava im pristup kroz zabranjeni portal automatski bez da su preusmjereni na stranicu portala.

en: Adding allowed IP addresses will allow IP access to/from these addresses through the captive portal without being taken to the portal page. This can be used for a web server serving images for the portal page or a DNS server on another network, for example.
bs: Dodavanje dozvoljenih IP adresa će omogućiti IP pristup od/do tih adresa kroz zabranjeni portal bez da se preusmjeravamo na portal stranicu. Ovo može biti korišteno za web server koji ima slike za portal stranicu ili DNS server na drugoj mreži npr.

en: Adding new hostnames will allow a DNS hostname access to/from the captive portal without being taken to the portal page. This can be used for a web server serving images for the portal page, or a DNS server on another network, for example. By specifying %1$sfrom%2$s addresses, it may be used to always allow pass-through access from a client behind the captive portal.
bs: Dodavanjem novih hostnameova ćemo omogućiti DNS hostnameu pristup od/ka zabranjenom portalu bez odlaska na tu stranicu. Ovo može biti korišteno za web server koji ima slike za porta stranicu, ili DNS server na drugoj mreži npr. Specificiranjem %1$sod%2$s adresa, može biti korišteno da uvijek dozvoli pristup sa klijenta iza zabranjenog portala.

en: Additional BOOTP/DHCP Options
bs: Dodatne opcije BOOTP/DHCP

en: Additional Certificate Revocation Lists
bs: Dodatna lista ukinutih certifikata

en: Additional Names for this Host
bs: Dodatna imena za ovaj host

en: Additional Pools
bs: Dodatni poolovi

en: Additional information
bs: Dodatne informacije

en: Additional users can be added here. User permissions for accessing the webConfigurator can be assigned directly or inherited from group memberships. Some system object properties can be modified but they cannot be deleted.
bs: Dodatne korisnike možete dodati ovdje. Korisničke dozvole za pristup webConfigurator-u mogu biti dodijeljene direktno ili naslijeđene od članstava u grupi. Neka svojstva sistemskih objekata mogu biti modifikovana ali ne i obrisana.

en: Address
bs: Adresa

en: Address and control field compression. This option only applies to asynchronous link types. It saves two bytes per frame.
bs: Adresa i polje kontrolne kompresije. Ova opcija se primjenjuje na tipove asinhronih linkova. Spašava dva bajta po frejmu.

en: Address mask reply
bs: Odgovor maskirane adrese

en: Address mask request
bs: Zahtjev maskirane adrese

en: Address must be a valid IP address or Firewall Alias.  Please correct this value to continue.
bs: Adresa mora biti validna IP adresa ili firewall alias. Molimo popravite ovu vrijednost za nastavak.

en: Address type
bs: Tip adrese

en: Address/mask
bs: Adresa/maska

en: Adds interface to QinQ interface groups
bs: Dodaje interfejs u QinQ interfejs grupu

en: Adjusts the size, in bytes, of the token bucket regulator. If not specified, heuristics based on the interface bandwidth are used to determine the size.
bs: Modifikuje veličinu u bajtima token bucket regulatora te ako nije specificirano, heuristika interface protoka će se koristiti za određivanje veličine.

en: Admin Access
bs: Admin pristup

en: Advanced
bs: Napredno

en: Advanced Client Settings
bs: Napredne klijentske postavke

en: Advanced Configuration
bs: Napredna konfiguracija

en: Advanced DHCP6 Client Configuration
bs: Napredna DHCP6 Klijent konfiguracija

en: Advanced Features
bs: Napredne značajke

en: Advanced IPsec Settings
bs: Napredne IPsec postavke

en: Advanced Log Filter
bs: Napredni log filter

en: Advanced Options
bs: Napredne opcije

en: Advanced PPP
bs: Napredni PPP

en: Advanced Resolver Options
bs: Napredne opcije resolvera

en: Advanced Settings
bs: Napredne postavke

en: Advanced Users Only
bs: Napredni korisnici

en: Advanced and MLPPP
bs: Napredno i MLPPP

en: Advanced filter
bs: Napredno filtriranje

en: Advanced options
bs: Napredne opcije

en: Advertisements
bs: Reklamiranja

en: Advertising frequency
bs: Frekvencija reklamiranja

en: After
bs: Nakon

en: After authentication Redirection URL
bs: URL redirekcije nakon autentikacije

en: After synch increase advertising skew
bs: Nakon sinhronizacije povećaj smanjenu reklamu

en: After updating, sync with the following repository/branch before reboot.
bs: Nakon ažuriranja, sinhroniziraj sa sljedećim repozitorijem/granom prije ponovnog pokretanja.

en: Age
bs: Starost

en: Aggressive
bs: Agresivno

en: Aggressive is more flexible, but less secure.
bs: Agresivno je više fleksibilno, ali manje sigurno.

en: Alert interval
bs: Interval upozorenja

en: Alias Domain
bs: Alias domena

en: Alias IPv4 address
bs: Alias IPv4 adresa

en: Alias Popups
bs: Alias popupi

en: Alias archive is a .tar/tgz file which cannot be decompressed because utility is missing!
bs: Alias arhiva je .tar/tgz fajl koji ne može biti dekompresovan jer utility nije pronađen!

en: Alias details
bs: Detalji aliasa

en: Alias entries must be a single host or alias.
bs: Alias unosi moraju biti jedan host ili alias.

en: Alias entries must specify a single host or alias.
bs: Alias unosi moraju specificirati jedan host ili alias

en: Alias for
bs: Alias za

en: Alias was created successfully.
bs: Alias je kreiran uspješno

en: Alias was updated successfully.
bs: Alias je ažuriran uspješno

en: Aliases
bs: Aliasi

en: Aliases Hostnames Resolve Interval
bs: Interval razrješavanja hostnameova aliasa

en: Aliases act as placeholders for real hosts, networks or ports. They can be used to minimize the number of changes that have to be made if a host, network or port changes.
bs: Aliasi se ponašaju kao mjesto za prave hostove, mreže ili portove. Mogu biti korišteni za minimiziranje broja promjena koje su potrebne ako host, mreža ili port se promijene.

en: Aliases to import
bs: Aliasi za importovanje

en: Aliases with numeric-only names are not valid. Skipping alias %s
bs: Aliasi sa samo numeričkim imenima nisu dozvoljeni. Preskačem alias %s

en: All
bs: Sve

en: All %1$s vouchers from Roll %2$s marked unused
bs: Svi %1$s vaučeri iz Rolla %2$s su označeni kao nekorišteni

en: All Dyn DNS entries are hidden.
bs: Svi dinamički DNS unosi su skriveni

en: All IPv6 traffic will be blocked by the firewall unless this box is checked
bs: Sav IPv6 promet će biti blokiran firewallom osim ako je ova opcija označena

en: All OpenVPN instances are hidden
bs: Sve OpenVPN instance su skrivene

en: All SMART drives are hidden.
bs: Svi SMART drajvovi su skriveni.

en: All System Information items are hidden.
bs: Sve sistemske informacije su skrivene.

en: All Users
bs: Svi korisnici

en: All WoL entries are hidden.
bs: Svi WoL unosi su skriveni.

en: All connections %1$sfrom%2$s the address are allowed
bs: Sve konekcije %1$sod%2$s adrese su dozvoljene

en: All connections %1$sfrom%2$s the hostname are allowed
bs: Sve konekcije %1$sod%2$s hostnamea su dozvoljene

en: All connections %1$sto or from%2$s are allowed
bs: Sve konekcije %1$ska ili od %2$s su dozvoljene

en: All connections %1$sto%2$s the address are allowed
bs: Sve konekcije %1$ska%2$s adresi su dozvoljene

en: All connections %1$sto%2$s the hostname are allowed
bs: Sve konekcije %1$ska%2$s hostnameu su dozvoljene

en: All gateways are hidden.
bs: Svi gejtveji su skriveni.

en: All incoming connections on this interface will be blocked until pass rules are added.
bs: Sve dolazeće konekcije na ovaj interface će biti blokirane dok se pass pravila ne dodaju.

en: All interfaces are hidden.
bs: Svi interfejsi su skriveni.

en: All packages reinstallation failed!
bs: Sve reinstalacije paketa nisu uspjele.

en: All packages reinstallation successfully completed.
bs: Sve reinstalacije paketa uspješno završene.

en: All rights reserved.
bs: Sva prava zadržana.

en: All selected interfaces are down.
bs: Svi selektovani interfejsi su isključeni.

en: All serial ports are listed, be sure to pick the port with the GPS attached.
bs: Svi serijski portovi su navedeni, budite sigurni da ste odabrali port sa odabranim GPSom.

en: All serial ports are listed, be sure to pick the port with the PPS source attached.
bs: Svi serijski portovi su navedeni, odaberite port sa PPS izvorom dodanim na njeg.

en: All services are hidden
bs: Svi servisi su skriveni

en: All statistics are hidden.
bs: Sva statistika je skrivena

en: All traffic graphs are hidden.
bs: Svi grafovi prometa su skriveni.

en: All traffic matching this NAT entry is passed
bs: Sav promet koji se poklapa sa ovim NAT unosom će proći

en: Allow
bs: Dozvoli

en: Allow DNS server list to be overridden by DHCP/PPP on WAN
bs: Dozvoli DNS server listi da bude overrideana DHCP/PPPom na WANu

en: Allow IP options
bs: Dozvoli IP opcije

en: Allow IPv6
bs: Dozvoli IPv6

en: Allow Snoop
bs: Dozvoli Snoop

en: Allow access to 'Interfaces: QinQ: Edit' page
bs: Dozvoli pristup stranici 'Interfejsi: QinQ: Modifikuj'.

en: Allow access to all pages
bs: Dozvoli pristup svim stranicama

en: Allow access to all pages required for the dashboard.
bs: Dozvoli pristup svim stranicama potrebnim za kontrolnu tablu.

en: Allow access to authenticate this user for HA sync via XMLRPC
bs: Dozvoli pristup za autentikaciju ovog korisnika za HA sinhroniziranje koristeći XMLRPC

en: Allow access to the 'AJAX: Get Stats' page.
bs: Dozvoli pristup stranici 'AJAX: Preuzmi statistiku'.

en: Allow access to the 'AJAX: Service Providers' page.
bs: Dozvoli pristup stranici 'AJAX: Preuzmi servis provajdere'.

en: Allow access to the 'Diagnostics: ARP Table' page.
bs: Dozvoli pristup stranici 'Dijagnostika: ARP tablica'.

en: Allow access to the 'Diagnostics: Authentication' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Autentikacija'.

en: Allow access to the 'Diagnostics: Backup & Restore' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Kopija i vraćanje postavki'.

en: Allow access to the 'Diagnostics: CPU Utilization' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Korištenje CPU'.

en: Allow access to the 'Diagnostics: Command' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Komanda'.

en: Allow access to the 'Diagnostics: Configuration History' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Povijest konfiguracija'.

en: Allow access to the 'Diagnostics: DNS Lookup' page.
bs: Dozvoli pristup stranici 'Dijagnostika: DNS traženje'.

en: Allow access to the 'Diagnostics: Edit File' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Edituj fajl'.

en: Allow access to the 'Diagnostics: Factory defaults' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Tvorničke zadane postavke'.

en: Allow access to the 'Diagnostics: GEOM Mirrors' page.
bs: Dozvoli pristup stranici 'Dijagnostika: GEOM Mirrori'.

en: Allow access to the 'Diagnostics: Halt system' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Zaustavi sistem'.

en: Allow access to the 'Diagnostics: Interface Traffic' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Promet interfacea'.

en: Allow access to the 'Diagnostics: NDP Table' page.
bs: Dozvoli pristup stranici 'Dijagnostika: NDP tablica'.

en: Allow access to the 'Diagnostics: Packet Capture' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Snimanje paketa'.

en: Allow access to the 'Diagnostics: Ping' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Ping'.

en: Allow access to the 'Diagnostics: Reboot System' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Restartuj sistem'.

en: Allow access to the 'Diagnostics: Reset states' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Resetuj stanja'.

en: Allow access to the 'Diagnostics: Routing tables' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Tablice preusmjeravanja'.

en: Allow access to the 'Diagnostics: S.M.A.R.T. Status' page.
bs: Dozvoli pristup stranici 'Dijagnostika: S.M.A.R.T. Status'.

en: Allow access to the 'Diagnostics: Show Source Tracking' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Prikaži izvore praćenja'.

en: Allow access to the 'Diagnostics: Show States' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Prikaži stanja'.

en: Allow access to the 'Diagnostics: Sockets' page.
bs: Dozvoli pristup stranici 'Dijagnositka: Socketi'

en: Allow access to the 'Diagnostics: States Summary' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Sažetak stanja'

en: Allow access to the 'Diagnostics: Tables' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Tablice'.

en: Allow access to the 'Diagnostics: Test Port' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Test Port'.

en: Allow access to the 'Diagnostics: Traceroute' page.
bs: Dozvoli pristup stranici 'Dijagnostika: Traceroute'.

en: Allow access to the 'Firewall: Alias: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: Alias: Edit'.

en: Allow access to the 'Firewall: Alias: Import' page.
bs: Dozvoli pristup stranici 'Firewall: Alias: Uvezi'.

en: Allow access to the 'Firewall: Aliases' page.
bs: Dozvoli pristup stranici 'Firewall: Aliasi'.

en: Allow access to the 'Firewall: Easy Rule' add/status page.
bs: Dozvoli pristup stranici 'Firewall: Lagano pravilo dodaj/status'.

en: Allow access to the 'Firewall: NAT: 1:1' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: 1:1'.

en: Allow access to the 'Firewall: NAT: 1:1: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: 1:1: Modifikuj'

en: Allow access to the 'Firewall: NAT: NPt' page.
bs: Dozvoli pristup stranici 'WebCfg - Firewall: NAT: NPt'.

en: Allow access to the 'Firewall: NAT: NPt: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: NPt: Modifikuj'.

en: Allow access to the 'Firewall: NAT: Outbound' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: Van opsega'.

en: Allow access to the 'Firewall: NAT: Outbound: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: Van opsega: Modifikuj'.

en: Allow access to the 'Firewall: NAT: Port Forward' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: Forwarduj Port'.

en: Allow access to the 'Firewall: NAT: Port Forward: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: NAT: Forwarduj Port: Modifikuj'.

en: Allow access to the 'Firewall: Rules' page.
bs: Dozvoli pristup stranici 'Firewall: Pravila'.

en: Allow access to the 'Firewall: Rules: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: Pravila: Modifikuj'.

en: Allow access to the 'Firewall: Schedules' page.
bs: Dozvoli pristup stranici 'Firewall: Rasporedi'.

en: Allow access to the 'Firewall: Schedules: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: Rasporedi: Modifikuj'.

en: Allow access to the 'Firewall: Traffic Shaper' page.
bs: Dozvoli pristup stranici 'Firewall: Modifikovanje prometa'.

en: Allow access to the 'Firewall: Traffic Shaper: Limiters' page.
bs: Dozvoli pristup stranici 'Firewall: Modifikovanje prometa: Limiteri'.

en: Allow access to the 'Firewall: Traffic Shaper: Queues' page.
bs: Dozvoli pristup stranici 'Firewall: Modifikovanje prometa: Redovi'.

en: Allow access to the 'Firewall: Traffic Shaper: Wizard' page.
bs: Dozvoli pristup stranici 'Firewall: Modifikovanje prometa: Čarobnjak'.

en: Allow access to the 'Firewall: Virtual IP Address: Edit' page.
bs: Dozvoli pristup stranici 'Firewall: Virtualne IP Adrese: Modifikuj'.

en: Allow access to the 'Firewall: Virtual IP Addresses' page.
bs: Dozvoli pristup stranici 'Firewall: Virtualne IP Adrese'.

en: Allow access to the 'Hidden: Detailed Status' page.
bs: Dozvoli pristup stranici 'Skriveno: Detaljan status'.

en: Allow access to the 'Hidden: Upload Configuration' page.
bs: Dozvoli pristup stranici 'Skriveno: Konfiguracija uploada'.

en: Allow access to the 'Interfaces' page.
bs: Dozvoli pristup stranici 'Interfejsi'.

en: Allow access to the 'Interfaces: Bridge : Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: Bridge: modifikacija'.

en: Allow access to the 'Interfaces: Bridge' page.
bs: Dozvoli pristup stranici 'Interfejsi: Bridge'.

en: Allow access to the 'Interfaces: GIF' page.
bs: Dozvoli pristup stranici 'Interfejsi: GIF'.

en: Allow access to the 'Interfaces: GIF: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: GIF: Modifikuj'.

en: Allow access to the 'Interfaces: GRE' page.
bs: Dozvoli pristup stranici 'Interfejsi: GRE'.

en: Allow access to the 'Interfaces: GRE: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: GRE: Modifikuj'.

en: Allow access to the 'Interfaces: Groups: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: Grupe: Modifikuj'.

en: Allow access to the 'Interfaces: Interface Assignments' page.
bs: Dozvoli pristup stranici 'Interfejsi: Zadani interfejsii'.

en: Allow access to the 'Interfaces: LAGG' page.
bs: Dozvoli pristup stranici 'Interfejsi: LAGG'.

en: Allow access to the 'Interfaces: LAGG: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: LAGG: Modifikuj'.

en: Allow access to the 'Interfaces: PPPs' page.
bs: Dozvoli pristup stranici 'Interfejsi: PPPovi'.

en: Allow access to the 'Interfaces: PPPs: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: PPPovi: Modifikuj'.

en: Allow access to the 'Interfaces: QinQ' page.
bs: Dozvoli pristup stranici 'Interfejsi: QinQ'.

en: Allow access to the 'Interfaces: VLAN' page.
bs: Dozvoli pristup stranici 'Interfejsi: VLAN'.

en: Allow access to the 'Interfaces: VLAN: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: VLAN: Modifikuj'.

en: Allow access to the 'Interfaces: Wireless' page.
bs: Dozvoli pristup stranici 'Interfejsi: Wireless'.

en: Allow access to the 'Interfaces: Wireless: Edit' page.
bs: Dozvoli pristup stranici 'Interfejsi: Wireless: Modifikuj'.

en: Allow access to the 'Load Balancer: Pool' page.
bs: Dozvoli pristup stranici 'Load Balanser: Pool'.

en: Allow access to the 'Load Balancer: Pool: Edit' page.
bs: Dozvoli pristup stranici 'Load Balanser: Pool: Modifikuj'.

en: Allow access to the 'Load Balancer: Virtual Server: Edit' page.
bs: Dozvoli pristup stranici 'Load Balanser: Virtualni Server: Modifikuj'.

en: Allow access to the 'OpenVPN: Client Specific Override' page.
bs: Dozvoli pristup stranici 'OpenVPN: Specifični klijent override'.

en: Allow access to the 'OpenVPN: Clients' page.
bs: Dozvoli pristup stranici 'OpenVPN: Klijenti'.

en: Allow access to the 'OpenVPN: Servers' page.
bs: Dozvoli pristup stranici 'OpenVPN: Serveri'.

en: Allow access to the 'Package: Edit' page.
bs: Dozvoli pristup stranici 'Paket: Modifikuj'.

en: Allow access to the 'Package: Settings' page.
bs: Dozvoli pristup stranici 'Paket: Postavke'.

en: Allow access to the 'Services: Captive Portal Edit Voucher Rolls' page.
bs: Dozvoli pristup stranici 'Servisi: Vaučer rollsi zabranjenog portala'.

en: Allow access to the 'Services: Captive Portal Vouchers' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni portal vaučeri'.

en: Allow access to the 'Services: Captive Portal Zones' page.
bs: Dozvoli pristup stranici 'Servisi: Zone zabranjenog portala'.

en: Allow access to the 'Services: Captive Portal' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni portal'.

en: Allow access to the 'Services: Captive Portal: Allowed Hostnames' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni portal: Dozvoljena host imena'.

en: Allow access to the 'Services: Captive Portal: Allowed IPs' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni portal: Dozvoljeni IPovi'.

en: Allow access to the 'Services: Captive Portal: Edit Allowed Hostnames' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni Portal: Modifikuj dozvoljena host imena'.

en: Allow access to the 'Services: Captive Portal: Edit Allowed IPs' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni portal: Modifikuj dozvoljene IPove'.

en: Allow access to the 'Services: Captive Portal: Edit MAC Addresses' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni Portal: Modifikuj MAC adrese'.

en: Allow access to the 'Services: Captive Portal: Edit Zones' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni Portal: Modifikuj zone'.

en: Allow access to the 'Services: Captive Portal: File Manager' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni Portal: Upravitelj podacima'.

en: Allow access to the 'Services: Captive Portal: Mac Addresses' page.
bs: Dozvoli pristup stranici 'Servisi: Sigurnosni Portal: Mac adrese'.

en: Allow access to the 'Services: Check IP Service' page.
bs: Dozvoli pristup stranici 'Servisi: Provjeri IP servis'.

en: Allow access to the 'Services: Check IP Service: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: Provjeri IP servis: Modifikuj'.

en: Allow access to the 'Services: DHCP Relay' page.
bs: Dozvoli pristup stranici 'Servisi: DHCP Relej'.

en: Allow access to the 'Services: DHCP Server' page.
bs: Dozvoli pristup stranici 'Servisi: DHCP Server'.

en: Allow access to the 'Services: DHCP Server: Edit static mapping' page.
bs: Dozvoli pristup stranici 'Servisi: DHCP Server: Modifikuj statično mapiranje'.

en: Allow access to the 'Services: DHCPv6 Relay' page.
bs: Dozvoli pristup stranici 'Servisi: DHCPv6 Relej'.

en: Allow access to the 'Services: DHCPv6 Server : Edit static mapping' page.
bs: Dozvoli pristup stranici 'Servisi: DHCPv6 Server: Modifikuj statično mapiranje'.

en: Allow access to the 'Services: DHCPv6 Server' page.
bs: Dozvoli pristup stranici 'Servisi: DHCPv6 Server'.

en: Allow access to the 'Services: DNS Forwarder' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Prosljeđivač'.

en: Allow access to the 'Services: DNS Forwarder: Edit Domain Override' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Prosljeđivač: Modifikuj override domene'.

en: Allow access to the 'Services: DNS Forwarder: Edit host' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Prosljeđivač: Modifikuj host'.

en: Allow access to the 'Services: DNS Resolver' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Resolver'.

en: Allow access to the 'Services: DNS Resolver: Access Lists' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Resolver: Pristupne liste'.

en: Allow access to the 'Services: DNS Resolver: Advanced' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Resolver: Napredno'.

en: Allow access to the 'Services: DNS Resolver: Edit Domain Override' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Resolver: Modifikuj override domene'.

en: Allow access to the 'Services: DNS Resolver: Edit host' page.
bs: Dozvoli pristup stranici 'Servisi: DNS Resolver: Modifikuj host'.

en: Allow access to the 'Services: Dynamic DNS client' page.
bs: Dozvoli pristup stranici 'Servisi: Dinamički DNS klijent'.

en: Allow access to the 'Services: Dynamic DNS clients' page.
bs: Dozvoli pristup stranici 'Servisi: Dinamički DNS klijenti'.

en: Allow access to the 'Services: IGMP Proxy' page.
bs: Dozvoli pristup stranici 'Servisi: IGMP Proxy'.

en: Allow access to the 'Services: IGMP Proxy: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: IGMP Proxy: Modifikuj'.

en: Allow access to the 'Services: Load Balancer: Monitor: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: Load Balanser: Monitori: Modifikacija'.

en: Allow access to the 'Services: Load Balancer: Monitors' page.
bs: Dozvoli pristup stranici 'Servisi: Load Balanser: Monitori'.

en: Allow access to the 'Services: Load Balancer: Virtual Servers' page.
bs: Dozvoli pristup stranici 'Servisi: Load Balanser: Virtualni Serveri'.

en: Allow access to the 'Services: NTP ACL Settings' page.
bs: Dozvoli pristup stranici 'Servisi: NTP ACL Postavke'.

en: Allow access to the 'Services: NTP PPS' page.
bs: Dozvoli pristup stranici 'Servisi: NTP PPS'.

en: Allow access to the 'Services: NTP Serial GPS' page.
bs: Dozvoli pristup stranici 'Servisi: NTP Serijski GPS'.

en: Allow access to the 'Services: NTP Settings' page.
bs: Dozvoli pristup stranici 'Servisi: NTP Postavke'.

en: Allow access to the 'Services: PPPoE Server' page.
bs: Dozvoli pristup stranici 'Servisi: PPPoE server'.

en: Allow access to the 'Services: PPPoE Server: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: PPPoE server: Modifikuj'.

en: Allow access to the 'Services: RFC 2136 Client: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: RFC 2136 Klijenti: Modifikuj'.

en: Allow access to the 'Services: RFC 2136 Clients' page.
bs: Dozvoli pristup stranici 'Servisi: RFC 2136 Klijenti'.

en: Allow access to the 'Services: Router Advertisements' page.
bs: Dozvoli pristup stranici 'Servisi: Router reklame'.

en: Allow access to the 'Services: SNMP' page.
bs: Dozvoli pristup stranici 'Servisi: SNMP'.

en: Allow access to the 'Services: UPnP' page.
bs: Dozvoli pristup stranici 'Servisi: UPnP'.

en: Allow access to the 'Services: Wake-on-LAN' page.
bs: Dozvoli pristup stranici 'Servisi: Wake-on-LAN'.

en: Allow access to the 'Services: Wake-on-LAN: Edit' page.
bs: Dozvoli pristup stranici 'Servisi: Wake-on-LAN: Modifikuj'.

en: Allow access to the 'Settings: Load Balancer: Settings' page.
bs: Dozvoli pristup stranici 'Servisi: Load Balanser: Postavke'.

en: Allow access to the 'Status: CARP' page.
bs: Dozvoli pristup stranici 'Status: CARP'.

en: Allow access to the 'Status: CPU load' page.
bs: Dozvoli pristup stranici 'Status: Zauzetost CPU'.

en: Allow access to the 'Status: Captive Portal Voucher Rolls' page.
bs: Dozvoli pristup stranici 'Status: Skriveni portal roll vaučera'.

en: Allow access to the 'Status: Captive Portal Vouchers' page.
bs: Dozvoli pristup stranici 'Status: Skriveni portal vaučeri'.

en: Allow access to the 'Status: Captive Portal' page.
bs: Dozvoli pristup stranici 'Status: Skriveni portal'.

en: Allow access to the 'Status: Captive Portal: Expire Vouchers' page.
bs: Dozvoli pristup stranici 'Status: Skriveni portal: Isticanje vaučera'.

en: Allow access to the 'Status: Captive Portal: Test Vouchers' page.
bs: Dozvoli pristup stranici 'Status: Skriveni portal: Testni vaučeri'.

en: Allow access to the 'Status: DHCP leases' page.
bs: Dozvoli pristup stranici 'Status: DHCP posudbe'.

en: Allow access to the 'Status: DHCPv6 leases' page.
bs: Dozvoli pristup stranici 'Status: DHCPv6 posudbe'.

en: Allow access to the 'Status: Filter Reload Status' page.
bs: Dozvoli pristup stranici 'Status: Status reučitavanja filtera'.

en: Allow access to the 'Status: Gateway Groups' page.
bs: Dozvoli pristup stranici 'Status: Gejtvej Grupe'.

en: Allow access to the 'Status: Gateways' page.
bs: Dozvoli pristup stranici 'Status: Gejtveji'.

en: Allow access to the 'Status: IPsec' page.
bs: Dozvoli pristup stranici 'Status: IPsec'.

en: Allow access to the 'Status: IPsec: Leases' page.
bs: Dozvoli pristup stranici 'Status: IPsec: Posudbe'.

en: Allow access to the 'Status: IPsec: SADs' page.
bs: Dozvoli pristup stranici 'Status: IPsec: SADs'.

en: Allow access to the 'Status: IPsec: SPD' page.
bs: Dozvoli pristup stranici 'Status: IPsec: SPD'.

en: Allow access to the 'Status: Interfaces' page.
bs: Dozvoli pristup stranici 'Status: Interfejsi'.

en: Allow access to the 'Status: Load Balancer: Pool' page.
bs: Dozvoli pristup stranici 'Status: Balanser učitavanja: Pool'.

en: Allow access to the 'Status: Load Balancer: Virtual Server' page.
bs: Dozvoli pristup stranici 'Status: Balanser učitavanja: Virtualni server'.

en: Allow access to the 'Status: Logs: DHCP' page.
bs: Dozvoli pristup stranici 'Status: Logovi: DHCP'.

en: Allow access to the 'Status: Logs: Firewall' page.
bs: Dozvoli pristup stranici 'Status: Logovi: Firewall'.

en: Allow access to the 'Status: Logs: Settings' page.
bs: Dozvoli pristup stranici 'Status: Logovi: Postavke'.

en: Allow access to the 'Status: Logs: System: Gateways' page.
bs: Dozvoli pristup stranici 'Status: Logovi: Sistem: Gejtveji'.

en: Allow access to the 'Status: Logs: System: Resolver' page.
bs: Dozvoli pristup stranici 'Status: Logovi: Sistem: Resolver'.

en: Allow access to the 'Status: Logs: VPN' page.
bs: Dozvoli pristup stranici 'Status: Logovi: VPN'.

en: Allow access to the 'Status: NTP' page.
bs: Dozvoli pristup stranici 'Status: NTP'.

en: Allow access to the 'Status: OpenVPN' page.
bs: Dozvoli pristup stranici 'Status: OpenVPN'.

en: Allow access to the 'Status: Package logs' page.
bs: Dozvoli pristup stranici 'Status: Log paketi'.

en: Allow access to the 'Status: Services' page.
bs: Dozvoli pristup stranici 'Status: Servisi'.

en: Allow access to the 'Status: System Logs: Firewall (Dynamic View)' page
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Firewall (Dinamički pregled)'.

en: Allow access to the 'Status: System Logs: Firewall Log Summary' page
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Sažeti Firewall log'.

en: Allow access to the 'Status: System Logs: General' page.
bs: Dozvoli pristup stranici 'Status: Sistemski Logovi: Generalno'.

en: Allow access to the 'Status: System Logs: IPsec VPN' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: IPsec VPN'

en: Allow access to the 'Status: System Logs: Load Balancer' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Balanser učitavanja'.

en: Allow access to the 'Status: System Logs: NTP' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: NTP'.

en: Allow access to the 'Status: System Logs: OpenVPN' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: OpenVPN'.

en: Allow access to the 'Status: System Logs: Portal Auth' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Portal za autentikaciju'.

en: Allow access to the 'Status: System Logs: System: Routing' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Sistem: Preusmjeravanje'.

en: Allow access to the 'Status: System Logs: System: Wireless' page.
bs: Dozvoli pristup stranici 'Status: Sistemski logovi: Sistem: Wireless'.

en: Allow access to the 'Status: Traffic Graph' page.
bs: Dozvoli pristup stranici 'Status: Grafike'.

en: Allow access to the 'Status: Traffic Shaper: Queues' page.
bs: Dozvoli pristup stranici 'Status: Upravljanje prometom: Redovi'.

en: Allow access to the 'Status: UPnP Status' page.
bs: Dozvoli pristup stranici 'Status: UPnP status'

en: Allow access to the 'Status: Wireless' page.
bs: Dozvoli pristup stranici 'Status: Wireless'.

en: Allow access to the 'System: Advanced: Admin Access' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Stranica pristupa administratora'.

en: Allow access to the 'System: Advanced: Firewall & NAT' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Firewall & NAT'.

en: Allow access to the 'System: Advanced: Miscellaneous' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Razno'.

en: Allow access to the 'System: Advanced: Networking' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Umrežavanje'.

en: Allow access to the 'System: Advanced: Notifications' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Notifikacije'.

en: Allow access to the 'System: Advanced: Tunables' page.
bs: Dozvoli pristup stranici 'Sistem: Napredno: Tunables'.

en: Allow access to the 'System: Authentication Servers' page.
bs: Dozvoli pristup stranici 'Sistem: Serveri autentikacije'.

en: Allow access to the 'System: CA Manager' page.
bs: Dozvoli pristup stranici 'Sistem: CA Upravitelj'.

en: Allow access to the 'System: CRL Manager' page.
bs: Dozvoli pristup stranici 'Sistem: CRL Upravitelj'.

en: Allow access to the 'System: Certificate Manager' page.
bs: Dozvoli pristup stranici 'Sistem: Upravitelj certifikatima'.

en: Allow access to the 'System: Gateway Groups' page.
bs: Dozvoli pristup stranici 'Sistem: Gejtvej grupe'.

en: Allow access to the 'System: Gateways' page.
bs: Dozvoli pristup stranici 'Sistem: Gejtveji'.

en: Allow access to the 'System: Gateways: Edit Gateway Groups' page.
bs: Dozvoli pristup stranici 'Sistem: Gejtveji: Modifikuj gateway grupe'.

en: Allow access to the 'System: Gateways: Edit Gateway' page.
bs: Dozvoli pristup stranici 'Sistem: Gejtveji: Modifikuj gateway'.

en: Allow access to the 'System: General Setup' page.
bs: Dozvoli pristup stranici 'Sistem: Generalni setup'.

en: Allow access to the 'System: Group Manager' page.
bs: Dozvoli pristup stranici 'Sistem: Upravitelj grupa'.

en: Allow access to the 'System: Group Manager: Add Privileges' page.
bs: Dozvoli pristup stranici 'Sistem: Upravitelj grupa: Dodaj privilegije'.

en: Allow access to the 'System: High Availability Sync' page.
bs: Dozvoli pristup stranici 'Sistem: Visokodostupno sinhroniziranje'.

en: Allow access to the 'System: License' page.
bs: Dozvoli pristup stranici 'Sistem: licence'.

en: Allow access to the 'System: Login / Logout' page and Dashboard.
bs: Dozvoli pristup stranici 'Sistem: Prijava / Odjava'  i kontrolnoj tabli.

en: Allow access to the 'System: Package Manager' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje paketima'.

en: Allow access to the 'System: Package Manager: Install Package' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje paketima: Instaliraj paket'.

en: Allow access to the 'System: Package Manager: Installed' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje Paketima: Instalirano'.

en: Allow access to the 'System: Static Routes' page.
bs: Dozvoli pristup 'Sistem: Statične Rute' stranici.

en: Allow access to the 'System: Static Routes: Edit route' page.
bs: Dozvoli pristup 'Sistem: Statične Rute: Izmjena rute' stranici.

en: Allow access to the 'System: Update: Settings' page.
bs: Dozvoli pristup stranici 'Sistem: Ažuriranje: Postavke'.

en: Allow access to the 'System: User Manager' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje korisnicima'.

en: Allow access to the 'System: User Manager: Add Privileges' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje korisnicima: Dodaj privilegije'.

en: Allow access to the 'System: User Manager: Settings' page.
bs: Dozvoli pristup stranici 'Sistem: Upravljanje korisnicima: Postavke'.

en: Allow access to the 'System: User Password Manager' page.
bs: Dozvoli pristup stranici 'Sistem: Upravitelj korisničkim lozinkama'.

en: Allow access to the 'System: User Settings' page.
bs: Dozvoli pristup stranici 'Sistem: Korisničke postavke'.

en: Allow access to the 'VPN: IPsec' page.
bs: Dozvoli pristup stranici 'VPN: IPsec'.

en: Allow access to the 'VPN: IPsec: Edit Phase 1' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Modifikuj fazu 1'.

en: Allow access to the 'VPN: IPsec: Edit Phase 2' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Modifikuj fazu 2'.

en: Allow access to the 'VPN: IPsec: Edit Pre-Shared Keys' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Modifikuj predšerovanu listu ključeva'.

en: Allow access to the 'VPN: IPsec: Mobile' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Mobile'.

en: Allow access to the 'VPN: IPsec: Pre-Shared Keys List' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Predšerovana lista ključeva'.

en: Allow access to the 'VPN: IPsec: Settings' page.
bs: Dozvoli pristup stranici 'VPN: IPsec: Postavke'.

en: Allow access to the 'VPN: L2TP' page.
bs: Dozvoli pristup stranici 'VPN: L2TP'.

en: Allow access to the 'VPN: L2TP: Users' page.
bs: Dozvoli pristup stranici 'VPN: L2TP: Korisnici'.

en: Allow access to the 'VPN: L2TP: Users: Edit' page.
bs: Dozvoli pristup stranici 'VPN: L2TP: Korisnici: Modifikuj'.

en: Allow access to the 'XMLRPC Interface Stats' page.
bs: Dozvoli pristup stranici 'XMLRPC Interface statistika'.

en: Allow access to the 'XMLRPC Library' page.
bs: Dozvoli pristup stranici 'XMLRPC biblioteka'.

en: Allow access to the 'pfSense wizard subsystem' page.
bs: Dozvoli pristup stranici 'pfSense subsistemski wizard'.

en: Allow clients on the bridge to obtain DHCP.
bs: Dozvoli klijentima na bridgeu da dobiju DHCP

en: Allow clients to save Xauth passwords (Cisco VPN client only).
bs: Dozvoli klijentima spašavanje Xauth lozinki (Cisco VPN klijenti samo).

en: Allow communication between clients connected to this server
bs: Dozvoli komunikaciju između klijenata spojenih na server

en: Allow connected clients to retain their connections if their IP address changes.
bs: Dozvoli spojenim klijentima da zadrže svoje konekcije ako im se IP adresa promijeni.

en: Allow direct access to all Dashboard widget pages, required for some widgets using AJAX.
bs: Dozvoli direktan pristup svim stranicama widgeta za kontrolnu tablu, potrebno za neke widgete koji koriste AJAX.

en: Allow interface to automatically detect edge status. This is the default for all interfaces added to a bridge.%1$sThis will disable the autoedge status of interfaces. %2$s
bs: Dozvoli interfaceu da automatski detektuje edge status. Ovo je po zadanim postavkama dodano na sve interfaceove koji su dodani na bridge. %1$sOvo će isključiti autoedge status interfaceova. %2$s

en: Allow intra-BSS communication
bs: Dozvoli intra-BSS komunikaciju

en: Allow multiple concurrent connections from clients using the same Common Name.
bs: Dozvoli višestruke istovremene konekcije od klijenata sa istim zajedničkim imenom.

en: Allow only users/groups with "Captive portal login" privilege set
bs: Dozvoli samo korisnicima/grupama sa postavljenom privilegijom "Prijava preko sigurnosnog portala"

en: Allow packets to pass between wireless clients directly when operating as an access point
bs: Dozvoli paketima prolaz između wireless klijenata kada operiraju kao pristupnoj tački.

en: Allow packets with IP options to pass. Otherwise they are blocked by default. This is usually only seen with multicast traffic.
bs: Dozvoli pakete sa IP opcijama da prođu. Inače su blokirani po zadanom. Ovo je obično samo viđeno sa multicast prometom.

en: Allow unprivileged access to tap(4) device nodes
bs: Dozvoli neprivilegovani pristup tap(4) uređajnim čvorovima

en: Allowed Hostname
bs: Dozvoljeni hostname

en: Allowed Hostnames
bs: Dozvoljena host imena

en: Allowed IP Addresses
bs: Dozvoljene IP adrese

en: Allowed IP address
bs: Dozvoljena IP adresa

en: Allowed NCP Encryption Algorithms. Click an algorithm name to remove it from the list
bs: Dozvoljeni NCP enkripcijski algoritmi. Klikni na ime algoritma za njegovo uklanjanje sa liste.

en: Allows access to the 'Diagnostics: Limiter Info' page
bs: Dozvoli pristup stranici 'Dijagnostika: Limiter informacije'.

en: Allows access to the 'Diagnostics: System Activity' page
bs: Dozvoli pristup stranici 'Dijagnostika: Sistemska aktivnost'

en: Allows access to the 'Diagnostics: pfInfo' page
bs: Dozvoli pristup stranici 'Dijagnostika: pfInfo'.

en: Allows access to the 'Diagnostics: pfTop' page
bs: Dozvoli pristup stranici 'Dijagnostika: pfTop'.

en: Allows passing through the captive portal without authentication a limited number of times per MAC address. Once used up, the client can only log in with valid credentials until the waiting period specified below has expired. Recommended to set a hard timeout and/or idle timeout when using this for it to be effective.
bs: Dozvoljava prolaz kroz zabranjeni portal bez autentikacije ograničen broj puta po MAC adresi. Nakon što je iskorišteno, klijent se može prijaviti samo sa validnim podacima dok period čekanja naveden ispod ne prođe. Preporučeno da se stavi hard timeout i/ili timeout vrijeme odsustva kad se ovo koristi da bude efektivno.

en: Allows rules to be written more easily.
bs: Dozvoljava pravilima da se lakše pišu.

en: Allows selection of different speeds for the serial console port.
bs: Dozvoljava selekciju različitih brzina za port serijske konzole.

en: Alternate Host
bs: Alternativni host

en: Alternate Hostnames
bs: Alternirajuća host imena

en: Alternate Hostnames for DNS Rebinding and HTTP_REFERER Checks. Specify alternate hostnames by which the router may be queried, to bypass the DNS Rebinding Attack checks. Separate hostnames with spaces.
bs: Alternirajuća host imena za DNS ponovnu dodjelu i HTTP _REFERER Provjere. Specificirajte alternirajuća host imena sa kojim ruterom mogu biti traženi upiti, da bi zaobišli DNS napad ponovne dodjele te provjeru istog. Odvojite host imena razmacima.

en: Alternate hostname %s is not a valid hostname.
bs: Alternirajuće host ime %s nije validno.

en: Alternative Names
bs: Alternativna imena

en: Always on
bs: Uvijek uključen

en: An IP address followed by C indicates a host currently connected through the VPN.
bs: IP adresa praćena sa slovom C ukazuje da je host trenutno spojen kroz VPN.

en: An IP address to NAT IPv6 packets must be specified.
bs: IP adresa za NAT IPv6 pakete mora biti specificirana.

en: An IPv4 Virtual IP cannot have an IPv6 CARP parent.
bs: IPv4 Virtualni IP ne može imati IPv6 CARP roditelja.

en: An IPv4 gateway can not be assigned in IPv6 rules.
bs: IPv4 gateway ne može biti dodijeljena u IPv6 pravilima.

en: An IPv4 gateway group can not be assigned in IPv6 rules.
bs: IPv4 gateway grupa ne može biti dodijeljena u IPv6 pravilima.

en: An IPv4 protocol was selected, but the selected interface has no IPv4 address.
bs: IPv4 protokol je selektovan, ali selektovani interfejs nema IPv4 adresu.

en: An IPv6 Virtual IP cannot have an IPv4 CARP parent.
bs: IPv6 Virtualni IP ne može imati IPv4 CARP roditelja.

en: An IPv6 gateway can not be assigned in IPv4 rules.
bs: IPv6 gateway ne može biti dodijeljena u IPv4 pravilima.

en: An IPv6 gateway group can not be assigned in IPv4 rules.
bs: IPv6 gateway grupa ne može biti dodijeljena u IPv4 pravilima.

en: An IPv6 protocol was selected, but the selected interface has no IPv6 address.
bs: IPv6 protokol je selektovan, ali odabrani interfejs nema IPv6 adresu.

en: An alias with this name already exists.
bs: Alias sa ovim imenom već postoji.

en: An area to restore was selected but the correct xml tag could not be located.
bs: Prostor za vraćanje je selektovan ali tačan xml tag nije mogao biti pronađen.

en: An authentication server with the same name already exists.
bs: Autentikacijski server sa istim imenom već postoji.

en: An error occurred while trying to find the interface got %s .  The rule has not been added.
bs: Greška prilikom pronalaska interfejsa %s. Pravilo nije dodano.

en: An error occurred.
bs: Naišlo se na grešku.

en: An integer between 576 and 65535 must be specified for Maximum MSS
bs: Cijeli broj između 576 i 65535 mora biti specificiran za maksimalni MSS.

en: An integer must be specified for Maximum MSS.
bs: Cijeli broj mora biti specificiran za maksimalni MSS.

en: An interface IP address must be specified for the DNS query source.
bs: Interfaceova IP adresa mora biti specificirana za svaki DNS izvorni upit.

en: An interface description with this name already exists.
bs: Opis interfacea sa ovim imenom već postoji.

en: An interface with the specified description already exists.
bs: Interface sa specificiranim opisom već postoji.

en: An internal CA must be defined in order to create an internal certificate.
bs: Interni CA mora biti definisan kako bi se stvorio interni certifikat.

en: An invalid IP address was detected in the 'Reject leases from' field.
bs: Pogrešna IP adresa je detektovana u 'Odbij posudbe iz' polja.

en: An invalid subnet or alias was specified. [%1$s/%2$s]
bs: Pogrešan subnet ili alias je specificiran. [%1$s/%2$s]

en: An update for an IP address can be forced on the edit page for that service.
bs: Ažuriranje za IP adresu može biti forsirano na stranici modifikuj za taj servis.

en: Another entry with the same group name already exists.
bs: Već postoji unos sa istim imenom grupe.

en: Another entry with the same identifier already exists.
bs: Još jedan unos sa istim identifikatorom postoji.

en: Another entry with the same username already exists.
bs: Još jedan unos sa istim imenom već postoji.

en: Antenna Settings
bs: Postavke antene

en: Anti-Lockout Rule
bs: Anti-Lockout pravilo

en: Any
bs: Bilo koji

en: Any country setting other than "Default" will override the regulatory domain setting
bs: Bilo koja postavke zemlje osim "Zadano" će overrideati regulatorne postavke domene

en: Any files that are uploaded here with the filename prefix of captiveportal- will be made available in the root directory of the captive portal HTTP(S) server. An icon file named favicon.ico may also be uploaded and will remain without prefix. They may be referenced directly from the portal page HTML code using relative paths. Example: An image uploaded with the name 'captiveportal-test.jpg' using the file manager can then be included in the portal page like this:
bs: Bilo koji fajlovi koji su uploadani ovdje sa filename prefiksom captiveportal- će biti dostupni u root direktoriju zabranjenog portala HTTP(S) servera. Ikona pod nazivom favicon.ico može biti uploadana direktno bez prefiksa. Može biti referencirano direktno sa portal stranice HTML kodom koristeći relativne putanje. Primjer: Slika uploadana sa imenom 'captiveportal-test.jpg' koristeći upravitelj fajlovima može biti uključena u portal stranicu na ovaj način:

en: Any identifier
bs: Bilo koji identifikator

en: Any text received from the host will be shown below the form.
bs: Bilo kakav tekst dobijen od hosta će biti prikazan ispod.

en: Anywhere
bs: Bilo gdje

en: Append circuit ID and agent ID to requests
bs: Dodaj circuit ID i agent ID zahtjevima

en: Apply Changes
bs: Primijeni promjene

en: Apply Filter
bs: Primijeni filter

en: Apply the action immediately on match.
bs: Primijeni radnju odmah na poklapanje

en: Are you sure you want to delete this VLAN?
bs: Da li ste sigurni da želite obrisati ovaj VLAN?

en: Are you sure you want to proceed?
bs: Da li ste sigurni da želite nastaviti?

en: Assign IP Addresses to users via RADIUS server reply attributes
bs: Dodijeli IP adrese korisnicima preko RADIUS server atributa odgovora

en: Assigned Privileges
bs: Dodijeljene privilegije

en: Assignments
bs: Zadaj

en: Assisted
bs: Asistirano

en: Assisted - RA Flags [managed, other stateful], Prefix Flags [onlink, auto, router]
bs: Pomognuti - RA oznake [managed, other stateful], Prefiksne oznake [onlink, auto, router]

en: Associated Panels Show/Hide
bs: Dodijeljeni paneli prikaži/sakrij

en: Associated filter rule
bs: Asocirano filter pravilo

en: Associated or Ad-Hoc Peers
bs: Asocirani Ad-Hoc peerovi

en: At least one DNS server must be specified to enable the DNS Server option.
bs: Bar jedan DNS server mora biti specificiran da bi uključili DNS server opciju.

en: At least one DNS server must be specified under System &gt; General Setup to enable Forwarding mode.
bs: Barem jedan DNS server mora biti specificiran pod Sistem &gt; Generalne postavke da bi uključili Forwarding način.

en: At least one Destination Server IP address must be specified.
bs: Bar jedan destinacijski server IP mora biti specificiran.

en: At least one WINS server must be specified to enable the DNS Server option.
bs: Barem jedan WINS server mora biti specificiran za uključivanje DNS server opcije.

en: At least one bw specification is necessary.
bs: Bar jedna bw specifikacija je potrebna

en: At least one encryption algorithm must be selected.
bs: Bar jedan enkripcijski algoritam mora biti specificiran.

en: At least one hashing algorithm needs to be selected.
bs: Bar jedan algoritam za heširanje mora biti selektovan.

en: At least one member interface must be selected for a bridge.
bs: Bar jedan član interfacea mora biti odabran za bridge.

en: At least one tag must be entered.
bs: Barem jedan tag mora biti unesen.

en: Attempting bind to %1$s%2$s%3$s
bs: Pokušavanje dodjele sa %1$s%2$s%3$s

en: Attempting connection to %1$s%2$s%3$s
bs: Pokušavanje konekcije sa %1$s%2$s%3$s

en: Attempting to fetch Organizational Units from %1$s%2$s%3$s
bs: Pokušavanje preuzimanja organizacionih jedinki od %1$s%2$s%3$s

en: Attribute Notes
bs: Zabilješke Atributa

en: Attributes
bs: Atributi

en: August
bs: Avgust

en: Auth Refresh Time
bs: Vrijeme autentikacijskog refresha

en: Auth error page contents
bs: Greška pri autentikaciji sadržaja stranice

en: Authentication
bs: Autentikacija

en: Authentication Failed: Username and/or Password was Incorrect.
bs: Greška pri autentikaciji: Korisničko ime i/ili lozinka su neispravni.

en: Authentication Method
bs: Metod autentikacije

en: Authentication Roaming Preauth
bs: Preautentikacija roaminga

en: Authentication Server %s deleted.
bs: Autentikacijski server %s obrisan.

en: Authentication Servers
bs: Autentikacijski serveri

en: Authentication Test
bs: Test autentikacije

en: Authentication Timeout
bs: Autentikacijski timeout

en: Authentication and Accounting
bs: Autentikacija i računanje

en: Authentication container
bs: Autentikacijski kontejner

en: Authentication containers
bs: Autentikacijski kontejneri

en: Authentication failed.
bs: Autentikacija nije uspjela

en: Authentication failed: Invalid username or password
bs: Autentikacija nije uspjela: Pogrešno korisničko ime ili lozinka

en: Authentication failed: not enough privileges
bs: Autentikacija nije uspjela: nema dovoljno privilegija

en: Authentication method
bs: Metoda autentikacije

en: Authentication method %s is invalid.
bs: Metoda autentikacija %s je pogrešna.

en: Authentication port
bs: Autentikacijski port

en: Authentication refresh time must be an integer between 0 and 3600 (inclusive).
bs: Autentikacijsko vrijeme refresha mora biti cijeli broj između 0 i 3600 (uključivo).

en: Authentication servers (e.g. LDAP, RADIUS)
bs: Autentikacijski serveri (npr LDAP, RADIUS)

en: Authentication statement
bs: Autentikacijski iskaz

en: Authorized SSH Keys
bs: Autorizirani SSH ključevi

en: Authorized keys
bs: Autorizirani ključevi

en: Auto
bs: Automatski

en: Auto Edge Ports
bs: Automatski edge portovi

en: Auto Edge interface (%s) is not part of the bridge. Remove the auto edge interface to continue.
bs: Auto Edge interface (%s) nije dio bridgea. Uklonite auto edge interface za nastavak.

en: Auto PTP Ports
bs: Automatski PTP portovi

en: Auto PTP interface (%s) is not part of the bridge. Remove the auto PTP interface to continue.
bs: Auto PTP interface (%s) nije dio bridgea. Uklonite auto PTP interface za nastavak.

en: Auto Update Page
bs: Automatski ažuriraj stranicu

en: Auto added OpenVPN rule from config upgrade.
bs: Automatski dodano OpenVP pravilo iz config nadogradnje.

en: Auto correct malformed initialization commands. (default: unchecked).
bs: Automatski ispravi nevaljane inicijalizacijske komande (zadano: odabrano).

en: Auto created rule
bs: Auto kreirano pravilo

en: Auto created rule for ISAKMP
bs: Auto kreirano pravilo za ISAKMP

en: Auto generate
bs: Automatski generiši

en: Auto sync on update
bs: Automatsko sinhroniziranje po ažuriranju

en: Auto-exclude LAN address
bs: Automatski isključi LAN adresu

en: AutoScale
bs: AutoSkaliranje

en: Automatic Rules:
bs: Automatska pravila:

en: Automatic create outbound NAT rules that direct traffic back out to the same subnet it originated from.
bs: Automatsko stvaranje vanopsežnih NAT pravila koji vraćaju promet nazad na isti subnet s kojeg je došao.

en: Automatic creation of additional NAT redirect rules from within the internal networks.
bs: Automatsko stvaranje dodatnih NAT pravila redirekcije od internih mreža

en: Automatic outbound NAT rule generation.%s(IPsec passthrough included)
bs: Automatsko generisanje vanopsežnih NAT pravila. %s(IPsec passthrough uključen)

en: Automatically detect the point-to-point status on interface by checking the full duplex link status. This is the default for interfaces added to the bridge.%1$sThe interfaces selected here will be removed from default autoedge status. %2$s
bs: Automatski detektuj point-to-point status na interfaceu tako što ćete označiti full dupleks status linka. Ovo je zadano za sve interfaceove koji su dodani na bridge.%1$sInterfejsi selektovani ovdje će biti uklonjeni sa zadanog autoedge statusa. %2$s

en: Automatically generate a TLS Key.
bs: Automatski generiši TLS ključ

en: Automatically generate a shared key
bs: Automatski generiši dijeljeni ključ

en: Automatically ping host
bs: Automatski pinguj hosta

en: Automatically refresh the output below
bs: Automatski osvježi izlaz ispod

en: Automatically selected (default)
bs: Automatski selektovano (zadano)

en: Available NCP Encryption Algorithms%1$sClick to add or remove an algorithm from the list
bs: Dostupni NCP enkripcijski algoritmi%1$sKlikni za dodavanje ili uklanjanje algoritma sa liste.

en: Available Packages
bs: Dostupni paketi

en: Available Range
bs: Dostupan domet

en: Available Widgets
bs: Dostupni widgeti

en: Available network ports:
bs: Dostupni mrežni portovi:

en: Available range
bs: Dozvoljeni dometi

en: Available widgets
bs: Dostupni widgeti

en: Average: %s
bs: Prosjek: %s

en: Awaiting connections
bs: Očekujem konekcije

en: B/W share of a backlogged queue.
bs: B/W share backloggovanog reda

en: BEHIND
bs: IZA

en: BSD Crypto Device (cryptodev)
bs: BSD Crypto Uređaj (cryptodev)

en: Back
bs: natrag

en: Background updates
bs: Pozadinska ažuriranja

en: Backoff cutoff
bs: Granični prelaz

en: Backup & Restore
bs: Kopija i vraćanje postavki

en: Backup Configuration
bs: Konfiguracija sigurnosne kopije

en: Backup Count
bs: Backup brojač

en: Backup area
bs: Područje sigurnosnih kopija

en: Bad Request - A hostname was not provided.
bs: Loš zahtjev - Hostname nije obezbjeđen.

en: Bad Request - Illegal characters in either the username or the password.
bs: Loš zahtjev - Nedozvoljeni znakovi u korisničkom imenu ili lozinci.

en: Bad Request - Invalid Tunnel ID.
bs: Loš zahtjev - Pogrešan Tunnel ID

en: Bad Request - Missing/Invalid Parameters.
bs: Loš zahtjev - Neki parametri fale ili nisu validni.

en: Bad Request - Required parameters were not provided.
bs: Loš zahtjev - Potrebni parametri nisu obezbjeđeni.

en: Bad Request - The IP provided was invalid.
bs: Loš zahtjev - Predviđeni IP nije validan.

en: Bad Request - The URL was malformed. Required parameters were not provided.
bs: Loš zahtjev - URL nije validan. Potrebni parametri nisu obezbjeđeni.

en: Bad request
bs: Loš zahtjev

en: Badly Formed Request (check the settings).
bs: Loše formiran zahtjev (provjeri postavke).

en: Balances outgoing traffic across the active ports based on hashed protocol header information and accepts incoming traffic from any active port.	 This is a static setup and does not negotiate aggregation with the peer or exchange frames to monitor the link.  The hash includes the Ethernet source and destination address, and, if available, the VLAN tag, and the IP source and destination address.
bs: Balansira odlazeći promet kroz aktivne portove bazirano na heširanom naslovu protokola informacija te prihvata dolazeći saobraćaj sa bilo kojeg aktivnog porta. Ovo je statički setup koji ne prihvata agregaciju sa peerom ili razmjenu frameova za praćenje linka. Heš uključuje Ethernet izvor i destinacijsku adresu i ako je dostupan, VLAN tag, kao i izvornu i destinacijsku IP adresu.

en: Bandwidth In
bs: Protok u

en: Bandwidth Out
bs: Protok iz

en: Bandwidth cannot be negative.
bs: Protok ne smije biti negativan.

en: Bandwidth down
bs: Protok dole

en: Bandwidth for schedule %s must be an integer.
bs: Propusnost za raspored %s mora biti cijeli broj.

en: Bandwidth in percentage should be between 1 and 100.
bs: Protok u procentima mora biti između 1 i 100.

en: Bandwidth is set only for MLPPP connections and when links have different bandwidths<br />MTU defaults to 1492<br />MRU will be auto-negotiated by default<br />Set only for MLPPP connections. MRRU will be auto-negotiated by default.
bs: Protok je postavljen samo za MLPPP konekcije i kada linkovi imaju različite protoke <br />MTU defaults to 1492<br />MRU će se automatski postaviti na zadano <br />Postavi samo za MLPPP konekcije. MRRU će se automatski postaviti na zadano.

en: Bandwidth limit for hosts to not saturate link
bs: Propusni limit za hostove da ne zasite link

en: Bandwidth must be an integer.
bs: Protok mora biti cijeli broj.

en: Bandwidth must be set.  This is usually the interface speed.
bs: Protok se mora postaviti. Ovo je inače brzina interfacea.

en: Bandwidth up
bs: Protok gore

en: Bandwidthtype
bs: Bandwidth tip

en: Bars the server from adding routes to the client's routing table
bs: Zabranjuje serveru dodavanje ruta na klijentovu ruting tablicu

en: Base
bs: Baza

en: Base DN
bs: Baza DN

en: Battery Power
bs: Snaga baterija

en: Be aware that increasing this value increases every log file size, so disk usage will increase significantly.
bs: Budite oprezni da povećavanjem ove vrijednosti povećavate veličinu svakog log fajla, tako da će se iskorištenost diska povećati.

en: Beginning XMLRPC sync data to %s.
bs: Počinjem XMLRPC sinhroniziranje podataka za %s

en: Beginning package installation for %s .
bs: Početak instaliranja paketa za %s.

en: Beginning package installation.
bs: Početak instaliranja paketa.

en: Bind Interfaces
bs: Dodijeli interface

en: Bind Password
bs: Dodijeli lozinku

en: Bind anonymous
bs: Dodijeli anonimno

en: Bind user DN
bs: Dodijeli korisnički DN

en: Bit mask
bs: Bit maska

en: Bitmask: Applies the subnet mask and keeps the last portion identical; 10.0.1.50 -&gt; x.x.x.50.
bs: Bitmaska: Primjenjuje subnet masku i zadržava zadnji dio identičnim; 10.0.1.50 -&gt; x.x.x.50.

en: Bits/sec
bs: Bita/sec

en: Block
bs: Blokiraj

en: Block Outside DNS
bs: Blokiraj DNS s vana

en: Block bogon networks
bs: Blokiraj bogon mreže

en: Block private networks
bs: Blokiraj privatne mreže

en: Block private networks and loopback addresses
bs: Blokiraj privatne mreže i upetljane adrese

en: Block this client connection based on its common name.
bs: Blokiraj ovu klijent konekciju baziranu na svom zajedničkom imenu.

en: Blocked MAC address redirect URL
bs: URL redirekcije za blokirane MAC adrese

en: Blocked MAC addresses will be redirected to this URL when attempting access.
bs: Blokirane MAC adrese će biti redirektovane na ovaj URL kada pokušaju pristupiti.

en: Blocked host %s via easy rule
bs: Blokiran host %s laganim pravilom

en: Blocks traffic from IP addresses that are reserved for private networks per RFC 1918 (10/8, 172.16/12, 192.168/16) and unique local addresses per RFC 4193 (fc00::/7) as well as loopback addresses (127/8). This option should generally be turned on, unless this network interface resides in such a private address space, too.
bs: Blokira promet od IP adresa koje su rezervisane za privatne mreže po RFC 1918 (10/8, 172.16/12, 192.168/16) i jedinstvene lokalne adrese po RFC 4193 (fc00::/7) kao i upetljane adrese (127/8). Ova opcija bi generalno trebala biti uključena osim ako se mrežni interface također nalazi u privatnom adresnom prostoru.

en: Blocks traffic from reserved IP addresses (but not RFC 1918) or not yet assigned by IANA. Bogons are prefixes that should never appear in the Internet routing table, and so should not appear as the source address in any packets received.%1$sNote: The update frequency can be changed under System->Advanced Firewall/NAT settings.
bs: Blokira promet od rezervisanih IP adresa (ali ne RFC 1918) ili onih koje već nisu dodijeljene od strane IANA. Bogoni su prefiksi koji se nikad ne bi smjeli pojaviti u Internet routing tablici, tako da se ne smiju pojavljivati niti u izvornoj adresi niti u primljenim paketima. %1$sNapomena: Frekvencija ažuriranja može biti promijenjena u meniju Sistem->Napredni firewall/NAT postavke.

en: Blue
bs: Plava

en: Bogon Networks
bs: Bogon mreže

en: Boolean type must be true, false, on, or off.
bs: Boolean tip mora biti tačno, netačno, uključeno ili isključeno.

en: Borrow from other queues when available
bs: Posudi od ostalih redova kad je moguće/dostupno

en: Borrows
bs: Posuđenja

en: Bosnian
bs: Bosanski

en: Both
bs: Oboje

en: Both a filename and a boot server must be configured for this to work! All three filenames and a configured boot server are necessary for UEFI to work!
bs: I ime fajla i boot server moraju biti konfigurisani da bi ovo radilo! Sva tri imena fajla i konfigurisan boot server su neophodni da bi UEFI radio!

en: Both a name and a value must be specified.
bs: I ime i vrijednost moraju biti specificirani.

en: Both a valid domain key and key name must be specified.
bs: I validan domen ključ i ključno ime moraju biti specificirani.

en: Both getURL and XMLHttpRequest are undefined
bs: I getURL i XMLHttpRequest su nedefinisani

en: Both maximum new connections per host and the interval (per second(s)) must be specified
bs: I maksimum novih konekcija po hostu i interval (po sekundama) mora biti specificiran

en: Both the Certificate and CRL must be specified.
bs: I certifikat i CRL moraju biti specificirani.

en: Branch name
bs: Ime grane

en: Bridge Configuration
bs: Konfiguracija bridgea

en: Bridge Interface
bs: Bridge interfejsa

en: Bridge Interfaces
bs: Bridge interfejsi

en: Bridges
bs: Bridgeovi

en: Bridging a wireless interface is only possible in hostap mode.
bs: Bridgeanje wireless interfacea je moguće samo u hostap načinu.

en: Brown
bs: Smeđa

en: Browse
bs: Pogledaj

en: Browser HTTP_REFERER enforcement
bs: Browser HTTP_REFERER forsiranje

en: Browser tab text
bs: Tekst browser taba

en: Bucket size (slots)
bs: Bucket veličina (slotovi)

en: Buckets must be an integer between 16 and 65535.
bs: Bucketi moraju biti cijeli broj između 16 i 65535.

en: Bug Database
bs: Baza podataka o bugovima

en: Bulk import
bs: Importovanje glavnog dijela

en: Burst for schedule %s must be an integer.
bs: Burst za raspored %s mora biti cijeli broj.

en: Buttons at the bottom represent %s actions and are activated accordingly.
bs: Dugmad na dnu predstavljaju %s akcije i aktiviraju se svrsishodno.

en: By Destination IP
bs: Po destinacijskom IPu

en: By IP Pair
bs: Po IP paru

en: By Interface
bs: Po interfaceu

en: By Queue
bs: Po redu

en: By Source IP
bs: Po izvornom IPu

en: By default DHCP leases are displayed in UTC time.	By checking this box DHCP lease time will be displayed in local time and set to the time zone selected. This will be used for all DHCP interfaces lease time.
bs: Po zadanom, DHCP posudbe su prikazane u UTC vremenu. Čekiranjem ove kockice, DHCP vrijeme posudbe će biti prikazano u lokalnom vremenu i biti postavljeno na vrijeme selektovane vremenske zone. Ovo će biti korišteno za sve DHCP interfaceove te vremena posudbe.

en: By default DHCPv6 leases are displayed in UTC time. By checking this box DHCPv6 lease time will be displayed in local time and set to time zone selected. This will be used for all DHCPv6 interfaces lease time.
bs: Zadano, DHCPv6 posudbe su prikazane po UTC vremenu. Klikanjem ovog kvadratića DHCPv6 vremena posudbe će biti prikazana u lokalnom vremenu i biti će postavljeni na selektovanu vremensku zonu te će ovo biti korišteno za sve DHCPv6 interfaceove i njihova vremena posudbe.

en: By default NTP will listen for all supported NMEA sentences. One or more sentences to listen for may be specified.
bs: Po zadanom će NTP pratiti sve podržane NMEA rečenice. Jedna ili više rečenica za praćenje moraju biti specificirane.

en: By default localhost (127.0.0.1) will be used as the first DNS server where the DNS Forwarder or DNS Resolver is enabled and set to listen on localhost, so system can use the local DNS service to perform lookups. Checking this box omits localhost from the list of DNS servers in resolv.conf.
bs: Po zadanim postavkama, localhost (127.0.0.1) će biti korišten kao prvi DNS server gdje je DNS forwardanje ili DNS resolver uključen i biti će postavljen da prati localhost, tako da sistem može koristiti lokalni DNS servis da vrši traženja. Označavanjem ove opcije izostavlja se localhost sa liste DNS servera u resolv.conf

en: By default, IPv4 and IPv6 networks residing on internal interfaces of this system are permitted. Allowed networks must be manually configured on the Access Lists tab if the auto-added entries are disabled.
bs: Po zadanom, IPv4 i IPv6 mreže koje se nalaze na internim interfejsima na ovom sistemu su zabranjene. Dozvoljene mreže moraju biti ručno konfigurisane preko menija pristupne liste ako su automatski dodani unosi isključeni.

en: By default, if IPv6 is configured and a hostname resolves IPv6 and IPv4 addresses, IPv6 will be used. If this option is selected, IPv4 will be preferred over IPv6.
bs: Po zadanim postavkama, ako je IPv6 konfigurisan i hostname razriješi IPv6 i IPv4 adrese, IPv6 će biti korišten. Ako je ova opcija odabrana, IPv4 će biti preferiran umjesto IPv6.

en: By default, the entire state table is displayed when entering Diagnostics > States. This option requires a filter to be entered before the states are displayed. Useful for systems with large state tables.
bs: Zadano, cijela tablica stanja je prikazana kada se ulazi Dijagnostika > Stanja. Ova opcija zahtijeva filter da se unese prije nego su stanja prikazana. Korisno za sisteme sa velikim tablicama stanja.

en: By default, the primary IPv4 and IPv6 addresses of this firewall are added as records for the system domain of this firewall as configured in %1$sSystem: General Setup%2$s. This disables the auto generation of these entries.
bs: Po zadanom, Primarne IPv4 i IPv6 adrese ovog firewalla su dodani kao unosi za sistem domenu ovog firewalla kao što je konfigurisano u %1$sSistem: Generalne postavke%2$s. Ovo isključuje automatsko stvaranje takvih unosa.

en: By default, traceroute uses UDP but that may be blocked by some routers. Check this box to use ICMP instead, which may succeed.
bs: Zadano, traceroute koristi UDP ali to može biti blokirano od strane nekih routera. Kliknite na ovu kutiju da koristite ICMP umjesto toga, što bi moglo proći.

en: By default, when a rule has a gateway specified and this gateway is down, the rule is created omitting the gateway. This option overrides that behavior by omitting the entire rule instead.
bs: Po zadanom, kada pravilo ima gateway specificiran i ovaj gateway je pao, pravilo je stvorilo izostavljanje gatewaya. Ova opcija overridea to ponašanje izostavljanjem cijelog pravila.

en: By default, when a schedule expires, connections permitted by that schedule are killed. This option overrides that behavior by not clearing states for existing connections.
bs: Po zadanom, kada raspored istekne, konekcije zabranjene tim rasporedom su uništene. Ova opcija overridea takvo ponašanje tako što ne čisti stanja za već postojeće konekcije.

en: Bypass firewall rules for traffic on the same interface
bs: Zaobiđi firewall pravila za proet na istom interfejsu

en: Bytes
bs: Bajti

en: Bytes In
bs: Bajta in

en: Bytes Out
bs: Bajta out

en: Bytes Sent / Received
bs: Bajti koji su poslani/primljeni

en: Bytes Sent/Received
bs: Bajti koji su poslani/primljeni

en: Bytes received: %s
bs: Primljeni bajti: %s

en: Bytes sent: %s
bs: Poslani bajti: %s

en: Bytes-In:
bs: Bajti-In:

en: Bytes-Out:
bs: Bajti-Out:

en: CA mismatch between the Certificate and CRL. Unable to Revoke.
bs: CA nepoklapanje između certifikata i CRL. Nemoguće obesnažiti.

en: CA to sign with
bs: CA sa kojim će se prijaviti

en: CARP Interface
bs: CARP interface

en: CARP Interfaces
bs: CARP interfejsi

en: CARP Status
bs: CARP status

en: CARP has been enabled.
bs: CARP je uključen.

en: CARP has detected a problem and this unit has a non-zero demotion status.
bs: CARP je detektovao problem sa ovom jedinicom koja ima nenulti status degradacije.

en: CAs
bs: CAovi

en: CPU Activity
bs: CPU aktivnost

en: CPU Load Graph
bs: Graf preopterećenosti CPU

en: CPU Type
bs: CPU tip

en: CPU Usage
bs: Korištenje CPU

en: CPU usage
bs: CPU korištenje

en: CPUs
bs: CPUovi

en: CSC Overrides
bs: CSC override

en: CSR data
bs: CSR podaci

en: CTS to self
bs: CTS sebi

en: Cache Size
bs: Veličina keša

en: Cache expire time
bs: Vrijeme isteka keša

en: Cached IP
bs: Kešovani IP

en: Cached IP: %1$s WAN IP: %2$s
bs: Kešovan IP: %1$s WAN IP: %2$s

en: Cached IP: %s
bs: Kešovani IP : %s

en: Cached IPv6: %s
bs: Kešovani IPv6: %s

en: Calculate
bs: Izračunaj

en: Calculates and appends checksum and missing special characters "$" and "*". May not work with some GPS models.
bs: Računa i dodaje checksum i bilo koje specijalne znakove koji fale a to su "$" i "*". Možda ne bude funkcionisalo sa nekim GPS modelima.

en: Calling interface down for interface %1$s, destroy is %2$s
bs: Pozivanje interfacea za interface %1$s, unišititi %2$s

en: Can be used to further identify this roll. Ignored by the system.
bs: Može se koristiti za dalju identifikaciju ovog rolla. Ignorisano od strane sistema.

en: Can't find PPP config for %s in interface_ppps_configure().
bs: Nije moguće pronaći PPP konfiguraciju za %s u interface_ppps_configure().

en: Cancel
bs: Otkaži

en: Candidate
bs: Kandidat

en: Cannot add IPv4 Gateway Address because no IPv4 address could be found on the interface.
bs: Nemoguće dodati IPv4 Gateway adresu jer niti jedna nije mogla biti pronađena na interfaceu.

en: Cannot add IPv6 Gateway Address because no IPv6 address could be found on the interface.
bs: Nemoguće dodati IPv6 gateway adresu jer niti jedna nije pronađena na interfaceu.

en: Cannot connect to an IPv4 address using IPv6.
bs: Nemoguće spajanje na IPv4 adresu koristeći IPv6.

en: Cannot connect to an IPv6 address using IPv4.
bs: Nemoguće spajanje na IPv6 adresu koristeći IPv4.

en: Cannot delete alias. Currently in use by %s.
bs: Nemoguće obrisati alias. Trenutno koristi %s.

en: Cannot delete schedule. Currently in use by %s.
bs: Nemoguće obrisati raspored jer ga trenutno koristi %s

en: Cannot delete user %s because it is a system user.
bs: Nemoguće obrisati korisnika %s jer je sistemski korisnik.

en: Cannot delete user %s because you are currently logged in as that user.
bs: Nemoguće obrisati korisnika %s jer ste trenutno prijavljeni kao taj korisnik.

en: Cannot enable static ARP when there are static map entries without IP addresses. Ensure all static maps have IP addresses and try again.
bs: Nemoguće uključiti statični ARP kada su statični map unosi bez IP adresa. Pobrinite se da sve statične mape imaju IP adrese pa pokušajte ponovo.

en: Cannot get CPU load
bs: Nemoguće dobiti CPU opterećenje

en: Cannot get data about interface %s
bs: Nemoguće dobiti podatke o interfaceu %s

en: Cannot resolve
bs: Nemoguće razriješiti

en: Cannot revoke certificates for an imported/external CRL.
bs: Nemoguće obesnažiti certifikate sa uvezenog/vanjskog CRLa.

en: Cannot set port %1$s to interface %2$s because this interface is a member of %3$s.
bs: Nemoguće postaviti port %1$s interfaceu %2$s jer interface je član %3$s.

en: Cannot use a reserved keyword as an alias name: %s
bs: Nemoguće koristiti rezervisanu ključnu riječ kao alias ime: %s

en: Cannot write %s
bs: Nemoguće pisati %s

en: Cannot write private key file
bs: Nemoguće pisati po privatnom fajlu ključa

en: Captive Portal
bs: Sigurnosni portal

en: Captive Portal
bs: Sigurnosni portal

en: Captive Portal Auth
bs: Autentikacija u zabranjenom portalu

en: Captive Portal Configuration
bs: Konfiguracija zabranjenog portala

en: Captive Portal Events
bs: Eventi sigurnosnog portala

en: Captive Portal Hostname Settings
bs: Postavke hostnamea zabranjenog portala

en: Captive Portal Status
bs: Status sigurnosnog portala

en: Captive Portal Voucher database synchronized with %1$s:%2$s
bs: Sigurnosni portal vaučer baza podataka sinhronizovana sa %1$s:%2$s

en: Captive Portal Zone
bs: Zona zabranjenog portala

en: Captive Portal Zones
bs: Zone zabranjenog portala

en: Captive Portal allowed users configuration changed
bs: Sigurnosni portal dozvoljama gostima promijenjenu konfiguraciju

en: Captive Portal: zone %s: Restore default error page
bs: Sigurnosni portal: zona %s: vrati zadanu error stranicu

en: Captive Portal: zone %s: Restore default logout page
bs: Sigurnosni portal: zona %s: vrati zadanu logout stranicu

en: Captive Portal: zone %s: Restore default portal page
bs: Sigurnosni portal: zona %s: Vrati zadanu portal stranicu

en: Category
bs: Kategorija

en: Causes cumulative uptime to be recorded and displayed on the %1$sStatus->Interfaces%2$s page.
bs: Uzrokuje kumulativni uptime da se spašava i prikazuje na stranici %1$sStatus->Interfejsi%2$s.

en: Causes mpd to adjust incoming and outgoing TCP SYN segments so that the requested maximum segment size is not greater than the amount allowed by the interface MTU. This is necessary in many setups to avoid problems caused by routers that drop ICMP Datagram Too Big messages. Without these messages, the originating machine sends data, it passes the rogue router then hits a machine that has an MTU that is not big enough for the data. Because the IP Don't Fragment option is set, this machine sends an ICMP Datagram Too Big message back to the originator and drops the packet. The rogue router drops the ICMP message and the originator never gets to discover that it must reduce the fragment size or drop the IP Don't Fragment option from its outgoing data.
bs: Čini da mpd namješta dolazeće i odlazeće TCP SYN segmente tako da tražena maksimalna veličina segmenta nije veća od dozvoljenog iznosa po MTU interfaceu. Ovo je neophodno u mnogim postavljanjima radi izbjegavanja problema koje prave routeri koji bacaju ICMP Datagram Too Big poruke. Bez ovih poruka, mašina šalje podatke, prolaze rogue router i onda dolaze do mašine koja ima MTU koji nije dovoljno velik za podatke. Kako nefragmentiranje IPova opcija je postavljena, mašina šalje gore navedenu poruku i baca paket. Tada rogue router baca izuzetak sa ICMP porukom i osoba nikad neće doznati da mora smanjiti fragmentnu veličinu ili isključiti ovu navedenu opciju.

en: Causes the interface to operate in dial-on-demand mode. Do NOT enable if the link is to remain continuously connected. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected.
bs: Čini da interface radi u načinu dial-on-demand. Ne uključuj ako želite da veza bude kontinuirano spojena. Interface je konfigurisan ali stvarna konekcija veze je odgođena dok kvalifikovani izlazeći promet ne bude detektovan.

en: Cell Mode
bs: Cell Način

en: Cell SIM State
bs: Cell SIM stanje

en: Cell Service
bs: Cell servis

en: Cert. Manager
bs: Upravitelj certifikata

en: Certificate
bs: Certifikat

en: Certificate %s association removed.
bs: Certifikat %s asocijacije uklonjen.

en: Certificate %s successfully deleted.
bs: Certifikat %s uspješnp obrisan

en: Certificate Attributes
bs: Atributi Certifikata

en: Certificate Authorities
bs: Autoriteti Certifikata

en: Certificate Authorities, Certificates, and Certificate Revocation Lists
bs: Autoritet certifikata, certifikati i lista isključenih certifikata

en: Certificate Authority
bs: Autoritet certifikata

en: Certificate Authority %s and its CRLs (if any) successfully deleted.
bs: Autoritativni Certifikat %s i njegovi CRLovi (ako ih ima) su uspješno obrisani

en: Certificate Manager
bs: Upravitelj certifikatima

en: Certificate Name
bs: Ime certifikata

en: Certificate Private Key (optional)
bs: Privatni ključ certifikata (opcionalno)

en: Certificate Revocation
bs: Ukinuće Certifikata

en: Certificate Revocation List %s is in use and cannot be deleted.
bs: Lista ukinutih certifikata %s se koristii ne može biti obrisana.

en: Certificate Revocation List %s successfully deleted.
bs: Lista ukinutih certifikata %s uspješno obrisana.

en: Certificate Revocation List data
bs: Podaci Liste ukinutih certifikata

en: Certificate Type
bs: Tip certifikata

en: Certificate authority
bs: Izdavanje certifikata (Autoritativni certifikat)

en: Certificate data
bs: Podaci o certifikatu

en: Certificate must be specified for HTTPS login.
bs: Certifikat mora biti specificiran za HTTPS login.

en: Certificates
bs: Certifikati

en: Change DHCP display lease time from UTC to local time
bs: Promijeni DHCP prikaz vremena posudbe sa UTC na lokalno vrijeme

en: Change DHCPv6 display lease time from UTC to local time
bs: Promijeni DHCPv6 prikaz posudbe vremena sa UTC na lokalno vrijeme.

en: Changed Advanced Firewall/NAT settings.
bs: Promijenjene napredne Firewall/NAT postavke.

en: Changed backup revision count to %s
bs: Promijenjen brojač backup revizije na %s

en: Changed system logging options.
bs: Promijenjene sistemske opcije logiranja.

en: Changes have been saved successfully
bs: Promjene su uspješno sačuvane

en: Changes the log verbosity for the IPsec daemon, so that more detail will be generated to aid in troubleshooting.
bs: Mijenja preopširnost logova za IPsec daemon, tako da će više detalja biti generisano kao pomoć u rješavanju problema.

en: Changing any Voucher parameter (apart from managing the list of Rolls) on this page will render existing vouchers useless if they were generated with different settings. Specifying the Voucher Database Synchronization options will not record any other value from the other options. They will be retrieved/synced from the master.
bs: Mijenjanje bilo kojeg vaučer parametra (osim upravljanja listom Rollova) na ovoj stranici će renderati već postojeće vaučere kao beskorisne ako su generisane sa drugačijim postavkama. Specificiranje opcije sinhronizacije vaučer baze podataka neće spašavati niti jednu drugu vrijednost iz drugih opcija. Oni će biti preuzeti/sinhronizirani preko mastera.

en: Changing name on a gateway group is not allowed.
bs: Mijenjanje imena na gateway grupi nije dozvoljeno.

en: Changing name on a gateway is not allowed.
bs: Mijenjanje imena na gatewayu nije dozvoljeno.

en: Changing this changes all child queues! Beware information can be lost.
bs: Mijenjanje ovih promjena mijenja cijeli red procesa djece! Znajte da informacije mogu biti izgubljene.

en: Channel
bs: Kanal

en: Channel must be between 0-255.
bs: Kanal mora biti između 0-255.

en: Channel selected is not valid for 802.11a or 802.11na.
bs: Odabrani kanal nije validan za 802.11a ili 802.11na.

en: Channel selected is not valid for 802.11b or 802.11g.
bs: Odabrani kanal nije validan za 802.11b ili 802.11g.

en: Character set
bs: Set karaktera

en: Check IP Service
bs: Provjera IP servisa

en: Check IP Services
bs: Provjeri IP servise

en: Check certificate of aliases URLs
bs: Provjeri certifikaciju aliasevih URLova

en: Check the link status on all interfaces configured with CARP VIPs and
bs: Provjerite status linka na svim interfejsima konfigurisanim sa CARP VIPovima i

en: Check the status of CARP Virtual IPs and interfaces %1$shere%2$s.
bs: Provjeri status CARP virtuelnih IPova i interfaceova %1$sovdje%2$s.

en: Check this option to allow OpenVPN clients and servers to negotiate a compatible set of acceptable cryptographic Encryption Algorithms from those selected in the NCP Algorithms list below.%1$s%2$s%3$s
bs: Odaberite ovu opciju za dozvoljavanje OpenVPN klijentima i serverima da traže kompatibilan skup prihvativih kriptografskih enkripcijskih algoritama od onih koji su selektovani u NCP listi algoritama ispod. %1$s%2$s%3$s

en: Check this option to disable SMTP notifications but preserve the settings below. Some other mechanisms, such as packages, may need these settings in place to function.
bs: Odaberite ovu opciju za isključivanje SMTP notifikacija ali zadržavanje postavki ispod. Neki drugi mehanizmi kao paketi, mogu trebati ove postavke da bi funkcionisali.

en: Check this option to disable growl notifications but preserve the settings below.
bs: Odaberi ovu opciju za isključivanje growl notifikacija ali zadržavanje postavki ispod.

en: Check this to require availability of a fresh CRL for peer authentication based on RSA signatures to succeed.
bs: Odaberite ovo za zahtijevanje novog CRL-a za peer autentikaciju baziranu na RSA potpisima/verifikaciji za nastavak.

en: Checking ...
bs: Provjeravanje...

en: Checking for %1$s PF hooks in package %2$s
bs: Provjera %1$s PF hooks u paketu %2$s

en: Checking this option will disable hardware TCP segmentation offloading (TSO, TSO4, TSO6). This offloading is broken in some hardware drivers, and may impact performance with some specific NICs. This will take effect after a machine reboot or re-configure of each interface.
bs: Biranjem ove opcije će se isključiti TCP rasterećenje hardverske segmentacije (TSO, TSO4, TSO6). Ovo rasterećivanje ne funkcioniše na nekim hardver drajverima, i može uticati na performanse sa određenim NICovima. Ovo će imati efekta tek nakon restartanja mašine  ili rekonfigurisanja svakog interfacea.

en: Checking this option will disable hardware checksum offloading.%1$sChecksum offloading is broken in some hardware, particularly some Realtek cards. Rarely, drivers may have problems with checksum offloading and some specific NICs. This will take effect after a machine reboot or re-configure of each interface.
bs: Biranjem ove opcije će se isključiti rasterećivanje hardverskog checksuma. %1$sChecksum rasterećivanje ne funkcioniše na nekom hardveru, posebno na Realtek karticama. Rijetko drajveri imaju problema sa ovom opcijom i specifičnim NICovima. Ovo će imati efekta tek nakon restartanja mašine ili rekonfigurisanja svakog interfacea.

en: Checking this option will disable hardware large receive offloading (LRO). This offloading is broken in some hardware drivers, and may impact performance with some specific NICs. This will take effect after a machine reboot or re-configure of each interface.
bs: Biranjem ove opcije će se isključiti Hardversko rasterećivanje velike pošiljke (LRO). Ovo rasterećivanje ne funkcioniše na nekim hardver drajverima, i može uticati na performanse sa određenim NICovima. Ovo će imati efekta tek nakon restartanja mašine  ili rekonfigurisanja svakog interfacea.

en: Chinese (Simplified, China)
bs: Kineski (Simplificirani, Kina)

en: Chinese (Taiwan)
bs: Kineski (Taiwan)

en: Choose 802.1p priority to apply.
bs: Odaberite 802.1p prioritet za primjenu.

en: Choose 802.1p priority to match on.
bs: Odaberite 802.1p prioritet za poklapanje.

en: Choose TTL for the dns record.
bs: Odaberite TTL za dns upit.

en: Choose a Certificate to Revoke
bs: Odaberite certifikat za ukidanje

en: Choose a color for the login page
bs: Odaberite boju za login stranicu

en: Choose a language for the webConfigurator
bs: Odaberite jezik za webConfigurator

en: Choose an Existing Certificate
bs: Odaberite već postojeći certifikat

en: Choose an alternative css file (if installed) to change the appearance of the webConfigurator. css files are located in /usr/local/www/css/%s
bs: Izaberite alternativni css fajl (ako je instaliran) da bi promijenili izgled webConfigurator.css fajlovi su locirani u /usr/local/www/css/%s

en: Choose an existing certificate
bs: Odaberite već postojeći certifikat

en: Choose the Acknowledge Queue only if there is a selected Queue.
bs: Odaberi potvrđeni red samo ako je selektovan red

en: Choose the IP to use for calling station attribute.
bs: Odaberi IP koji se koristi za atribut pozivanja stanice.

en: Choose the Internet Protocol this gateway uses.
bs: Odaberite Internet Protokol koji ovaj gejtvej koristi.

en: Choose the Out queue/Virtual interface only if In is also selected. The Out selection is applied to traffic leaving the interface where the rule is created, the In selection is applied to traffic coming into the chosen interface.%1$sIf creating a floating rule, if the direction is In then the same rules apply, if the direction is Out the selections are reversed, Out is for incoming and In is for outgoing.
bs: Odaberite Van red/Virtualni interface samo ako je U također odabran. Van selekcija je primijenjena na saobraćaj koji napušta interface kada se kreira pravilo, U selekcija je primijenjena na saobraćaj koji dolazi na željeni interface. %1$sAko kreirate floating pravilo, ako je smjer U onda se koriste ista pravila, inače su selekcije obrnute, Van je za dolazeće a U je za odlazeće

en: Choose the amount of bandwidth for this queue
bs: Izaberi količinu protoka za ovaj red

en: Choose the interface from which packets must come to match this rule.
bs: Odaberi interface od kojeg paketi moraju doći za poklapanje sa ovim pravilom.

en: Choose the interface(s) for this rule.
bs: Odaberi interfaceove za ovo pravilo.

en: Choose the interfaces on which to enable TFTP proxy helper.
bs: Odaberite interfaceove na kojima želite uključiti TFTP proxy helper.

en: Choose the members that will be used for the link aggregation.
bs: Odaberi članove koji će se koristiti za agregaciju linkova.

en: Choose what to do with packets coming from this MAC address.
bs: Odaberite šta se radi sa paketima koji dolaze sa ove MAC adrese.

en: Choose what to do with packets that match the criteria specified below.%sHint: the difference between block and reject is that with reject, a packet (TCP RST or ICMP port unreachable for UDP) is returned to the sender, whereas with block the packet is dropped silently. In either case, the original packet is discarded.
bs: Odaberite šta raditi sa paketima koji se slažu sa kriterijem specificiranim ispod.%sSavjet: razlika između blokiranja i odbijanja je da sa odbijanjem, paket (TCP RST ili ICMP port koji je nedostižan za UDP) je vraćen pošiljaocu, dok je kod blokiranja izgubljen. U svakom slučaju originalni paket je odbijen.

en: Choose which IP protocol this rule should match.
bs: Odaberi kojem IP protokol se ovo pravilo treba poklopiti.

en: Choose which gateway this route applies to or %1$sadd a new one first%2$s
bs: Odaberite koji gejtvej se primjenjuje na ovu rutu ili %1$sdodajte novu prvobitno%2$s

en: Choose which interface the host to be woken up is connected to.
bs: Odaberite koji interface se budi kad je konektovan.

en: Choose which interface this gateway applies to.
bs: Odaberite kojem interfaceu ovaj gejtvej se primjenjuje.

en: Choose which interface this host is connected to.
bs: Odaberite na kojem interfaceu je ovaj host spojen.

en: Choose which interface this rule applies to. In most cases "WAN" is specified.
bs: Odaberite za koji interface se primjenjuje ovo pravilo. U većini slučajeva je "WAN" specificiran.

en: Choose which interface this rule applies to.%sHint: Typically the "WAN" is used here.
bs: Odaberite za koji interface se primjenjuje ovo pravilo. %s Savjet: Tipično se ovdje izabira "WAN".

en: Choose which protocol this rule should match. In most cases "TCP" is specified.
bs: Odaberi koji protokol se treba poklapati sa ovim pravilom. U većini slučajeva "TCP" je specificiran.

en: Choose which protocol this rule should match. In most cases "any" is specified.
bs: Odaberi koji protokol treba spajati sa ovim pravilom. U većini slučajeva je "any" specificiran.

en: Cleaning up Interfaces
bs: Čiščenje interfaceova

en: Clear
bs: Očisti

en: Clear Metadata
bs: Očisti metadatu

en: Clear Package Lock
bs: Očisti paketni lock

en: Clear all sessions
bs: Obriši sve sesije

en: Clear command entry
bs: Očisti prostor za unos komande

en: Clear graphs when not visible.
bs: Očisti grafove kada nisu vidljivi

en: Clear invalid DF bits instead of dropping the packets
bs: Očisti nevaljanje DF bitove umjesto bacanja paketa

en: Clear log
bs: Očisti log

en: Clear selection
bs: Obriši selekciju

en: Clears all local log files and reinitializes them as empty logs. This also restarts the DHCP daemon. Use the Save button first if any setting changes have been made.
bs: Čisti sve lokalne log fajlove i reinicijalizira ih kao prazne logove. Ovo također restarta DHCP daemon. Koristite dugme "Spasi" prvo ako su napravljene ikakve promjene u postavkama.

en: Clears local log file and reinitializes it as an empty log. Save any settings changes first.
bs: Čisti lokalni log fajl i postavlja ga kao prazan log fajl. Spasite bilo kakve promjene postavki prvobitno.

en: Click "Halt" to halt the system immediately, or "Cancel" to go to the system dashboard. (There will be a brief delay before the dashboard appears.)
bs: Klikni "Halt" za trenutno zaustavljanje sistema ili "Cancel" za vraćanje na sistemsku kontrolnu ploču. (Bit će određeno kašnjenje prije nego se kontrolna ploča pojavi.)

en: Click "Reboot" to reboot the system immediately, or "Cancel" to go to the system dashboard without rebooting. (There will be a brief delay before the dashboard appears.)
bs: Klikni "Reboot" da biste ponovo pokrenuli sistem odmah, ili "Cancel" da se vratite na sistemsku kontrolnu ploču bez ponovnog pokretanja. (Bit će određeno kašnjenje prilikom vraćanja na kontrolnu ploču.)

en: Click %1$shere%2$s for more information.
bs: Klikni %1$sovdje%2$s za više informaciju.

en: Click %1$shere%2$s to configure CARP.
bs: Kliknite %1$sovdje%2$s za konfigurisanje CARPa.

en: Click for additional PPPoE configuration options. Save first if changes have been made.
bs: Klikni za dodatne PPPoE konfiguracijske opcije. Spasite prvo ako su promjene napravljene.

en: Click individual date to select that date only. Click the appropriate weekday Header to select all occurrences of that weekday.
bs: Klikni na pojedinačni datum za biranje samo tog datuma. Klikni svojstveni dan u sedmici da izaberete svako pojavljivanje tog dana.

en: Click the MAC address to wake up an individual device.
bs: Kliknite MAC adresu za podizanje određenog uređaja

en: Click the button below to disconnect
bs: Klikni dugme ispod za diskonektovanje

en: Click the button to add a new rule.
bs: Klikni ovo dugme da dodaš novo pravilo.

en: Click this button to clear the package lock if a package fails to reinstall properly after an upgrade.
bs: Klikni ovo dugme da bi očistili paketno zaključavanje ako paket ne uspije da se ponovo instalira nakon nadogradnje.

en: Click this button to reinstall all system packages.  This may take a while.
bs: Klikni ovo dugme za reinstaliranje svih sistemskih paketa. Ovo može potrajati.

en: Click to create a user certificate
bs: Klikni za kreiranje korisničkog certifikata

en: Click to install
bs: Klikni za instalaciju

en: Click to paste an authorized key
bs: Klikni za pastiranje autorizovanog ključa

en: Click to resolve
bs: Klikni za razrješavanje

en: Click to toggle enabled/disabled status
bs: Klikni za uključivanje/isključivanje statusa

en: Client Certificate
bs: Klijent certifikat

en: Client Configuration (mode-cfg)
bs: Klijent konfiguracija (mode-cfg)

en: Client Connections
bs: Konekcije klijentima

en: Client Id
bs: ID klijenta

en: Client Identifier
bs: Identifikator klijenta

en: Client Instance Statistics
bs: Klijent statistika instanci

en: Client Settings
bs: Klijentske postavke

en: Client Specific Overrides
bs: Specifični overrideovi klijenata

en: Client disabled. Client should exit and not perform any more updates without user intervention.
bs: Klijent isključen. Klijent bi trebao napustiti program i ne vršiti nikakva ažuriranja bez korisničke intervencije.

en: Client specific override successfully deleted.
bs: Specifični klijent override uspješno obrisan.

en: Client successfully deleted.
bs: Klijent uspješno obrisan

en: Clients
bs: Klijenti

en: Clients will be disconnected after this amount of inactivity. They may log in again immediately, though. Leave this field blank for no idle timeout.
bs: Klijenti će biti diskonektovani ako ne budu aktivni onoliko minuta koliko je navedeno. Mogu se ponovo prijaviti ako žele. Ostavite ovo polje prazno da ovaj limit ne bi postojao.

en: Clients will be disconnected after this amount of time, regardless of activity. They may log in again immediately, though. Leave this field blank for no hard timeout (not recommended unless an idle timeout is set).
bs: Klijenti će biti diskonektovani nakon onoliko minuta koliko je navedeno bez obzira na aktivnost. Mogu se ponovo prijaviti ako žele. Ostavite ovo polje prazno da ovaj limit ne bi postojao (nije preporučeno osim ako nije postavljen timeout odsutnosti).

en: Clients will be redirected to this URL instead of the one they initially tried to access after they've authenticated.
bs: Klijenti će biti preusmjereni na ovaj URL umjesto na onaj koji su pokušali nakon autentikacije.

en: Clients will have their available pass-through credits restored to the original count after this amount of time since using the first one. This must be above 0 hours if pass-through credits are enabled.
bs: Klijenti će imati dostupne pass-through kredite vraćene na originalni brojač nakon što je prošao ovaj period vremena naveden nakon korištenja prvog. Ovo mora biti iznad 0 sati ako su pass-through krediti uključeni.

en: Clock Altitude
bs: Visina sata

en: Clock ID
bs: ID sata

en: Clock Latitude
bs: Širina sata

en: Clock Longitude
bs: Dužina sata

en: Clock location
bs: Lokacija sata

en: Clone Shaper to this Interface
bs: Kloniraj Shaper za ovaj interface

en: Cloning new wireless interface %s
bs: Kloniram novi wireless interface %s

en: Close
bs: Zatvori

en: Collecting IPsec status information.
bs: Skupljanje IPsec statusne informacije.

en: Collecting initial data, please wait
bs: Skupljam inicijalne podatke, molimo sačekajte

en: Collisions
bs: Kolizije

en: Command Prompt
bs: Komadna linija

en: Commands entered here will be sent to the GPS during initialization. Please read and understand the GPS documentation before making any changes here.
bs: Komande unese ovdje će biti poslane GPSu tokom inicijalizacije. Molimo pročitajte i shvatite GPS dokumentaciju prije vršenja bilo kakvih promjena ovdje.

en: Comment
bs: Komentar

en: Common Name
bs: Zajedničko ime

en: Common Wireless Configuration - Settings apply to all wireless networks on
bs: Česta wireless konfiguracija - Postavke se primjenjuju za sve wireless mreže

en: Common password fields in config.xml have been automatically redacted.
bs: Česta polja lozinki u config.xml su automatski uređena.

en: Community
bs: Zajednica

en: Complete Signing Request for
bs: Završi zahtjev za verifikaciju za

en: Component
bs: Komponenta

en: Compress tunnel packets using the LZO algorithm. Adaptive compression will dynamically disable compression for a period of time if OpenVPN detects that the data in the packets is not being compressed efficiently.
bs: Kompresuj tunnel pakete koristeći LZO algoritam. Adaptivna kompresija će dinamički isključiti kompresiju za vremenski period ako OpenVPN detektuje da podaci u paketima nisu efikasno kompresovani.

en: Compression
bs: Kompresija

en: Concurrent connections
bs: Istovremene konekcije

en: Concurrent user logins
bs: Uzastopne prijave korisnika

en: Config History
bs: Povijest Konfiguracije

en: Config.xml is corrupted and is 0 bytes.  Could not restore a previous backup.
bs: config.xml je oštećen i ima 0 bajta. Nemoguće vratiti na prethodnu sigurnosnu kopiju.

en: Config.xml unlocked.
bs: config.xml otključan.

en: Configuration
bs: Konfiguracija

en: Configuration Backup Cache Settings
bs: Postavke konfiguracijskog backup keša

en: Configuration Change
bs: Promjena u konfiguraciji

en: Configuration Diff from %1$s to %2$s
bs: Razlika konfiguracije od %1$s do %2$s

en: Configuration File Override
bs: Override konfiguracijskog ajla

en: Configuration Override
bs: Konfiguracijski override

en: Configuration Synchronization Settings (XMLRPC Sync)
bs: Postavke sinhronizacije konfiguracije (XMLRPC Sync)

en: Configuration backend
bs: Zadnji dio konfiguracije

en: Configuration changed via the pfSense wizard subsystem.
bs: Konfiguracija promijenjena preko pfSense wizard podsistema.

en: Configuration file
bs: Konfiguracijski fajl

en: Configuration file is encrypted.
bs: Konfiguracijski fajl je enkriptovan.

en: Configuration...
bs: Konfiguracija...

en: Configure NULL service name
bs: Konfiguriši NULL ime servisa

en: Configure Unique IDs as
bs: Konfiguriši jedinstvene IDove kao

en: Configure a Send and Receive Buffer size for OpenVPN. The default buffer size can be too small in many cases, depending on hardware and network uplink speeds. Finding the best buffer size can take some experimentation. To test the best value for a site, start at 512KiB and test higher and lower values.
bs: Konfiguriši slanje i primanje buffer veličine za OpenVPN. Zadana buffer veličina može biti premala u nekim slučajevima, u zavisnosti od hardverske i mrežne uplink brzine. Pronalazak najbolje buffer veličine se može naći testiranjem/eksperimentisanjem. Za dobijanje najbolje vrijednosti za stranicu, počnite sa 512KiB i testirajte više i niže vrijednosti.

en: Configured Ranges
bs: Konfigurisani dometi

en: Configured a L2TP VPN user.
bs: Konfigurisan L2TP VPN korisnik.

en: Configured a wake-on-LAN entry.
bs: Konfigurisan unos wake-on-LANa

en: Configuring %s
bs: Konfigurisanje %s

en: Configuring %s interface...
bs: Konfigurisanje %s interfacea...

en: Configuring CARP settings finalize...
bs: Finalno konfigurisanje CARP postavki...

en: Configuring CARP settings...
bs: Konfigurišem CARP postavke...

en: Configuring IPsec VPN...
bs: Konfigurisanje IPsec VPN...

en: Configuring LAGG interfaces...
bs: Konfigurišem LAGG interfaceove...

en: Configuring PPPoE Server service...
bs: Konfigurišem PPPoE server servis...

en: Configuring QinQ interfaces...
bs: Konfigurišem QinQ interfaceove...

en: Configuring VLAN interfaces...
bs: Konfigurišem VLAN interfaceove...

en: Configuring firewall
bs: Konfiguracija firewalla

en: Configuring l2tp VPN service...
bs: Konfigurišem l2tp VPN servis...

en: Configuring loopback interface...
bs: Konfigurišem loopback interface...

en: Configuring package components...
bs: Konfigurisanje komponenti paketa...

en: Confirm
bs: potvrdi

en: Confirm Action
bs: Potvrdi radnju

en: Confirm Password
bs: Potvrdi lozinku

en: Confirm Update
bs: Potvrdi ažuriranje

en: Confirmation Required to Add Easy Rule
bs: Konfirmacija potrebna za dodavanje Easy pravila

en: Confirmation Required to install package %s.
bs: Potvrda neophodna za instaliranje paketa %s.

en: Confirmation Required to reinstall all packages.
bs: Potvrda neophodna za ponovno instaliranje svih paketa.

en: Confirmation Required to reinstall package %s.
bs: Potvrda neophodna za ponovno instaliranje paketa %s.

en: Confirmation Required to remove package %s.
bs: Potvrda neophodna za uklanjanje paketa %s.

en: Confirmation Required to replace the current configuration with this backup.
bs: Potvrda je neophodna da bi se zamijenila trenutna konfiguracija sa ovim backupom.

en: Confirmation Required to save changes.
bs: Potvrda potrebna za spašavanje promjena.

en: Confirmation Required to update %s system.
bs: Potvrda neophodna za ažuriranje sistema %s.

en: Confirmation Required to upgrade package %1$s from %2$s to %3$s.
bs: Potvrda neophodna za nadogranju paketa %1$s sa %2$s na %3$s.

en: Confirmation required to delete this P1 entry.
bs: Potvrda neophodna za brisanje ovog P1 unosa.

en: Confirmation required to delete this P2 entry.
bs: Potvrda neophodna za brisanje ovog P2 unosa.

en: Connect
bs: Spoji

en: Connect VPN
bs: Konektuj VPN

en: Connected Since
bs: Spojena od

en: Connection Timeout
bs: Timeout konekcije

en: Connection blocking
bs: Blokiranje konekcije

en: Connection failed.
bs: Konekcija nije uspješna

en: Connection timeout to E-Mail server
bs: Istek konekcije ka E-mail serveru

en: Connections From Upstream SIP Server
bs: Konekcije od uzlaznog upstream SIP servera

en: Connections To Upstream SIP Server
bs: Konekcije ka uzlaznom upstream SIP serveru

en: Connections matching this rule will be mapped to the specified %1$sAddress%2$s.%3$sThe %1$sAddress%2$s can be an Interface, a Host-type Alias, or a %4$sVirtual IP%5$s address.
bs: Konekcije koje se poklapaju sa ovim pravilom će biti mapirane specificiranoj %1$sAdresa%2$s.%3$s %1$sAdresa%2$s može biti interface, host-type alias ili %4$sVirtual IP%5$s adresa.

en: Conservative
bs: Konzervativno

en: Console Options
bs: Opcije konzole

en: Console assignment of interfaces
bs: Konzolna dodjela interface-ova

en: Console menu
bs: Konzolni meni

en: Consult %1$sthe doc wiki article on DH Parameters%2$sfor information on generating new or stronger paramater sets.
bs: Razmotrite %1$swiki članak o DH parametrima%2$s za informacije o stvaranju novih ili jačih skupova parametara.

en: Consumer
bs: Korisnik

en: Consumer Information - Available Consumers
bs: Korisničke informacije - Dostupni korisnici

en: Consumer has metadata from an existing mirror. Clear metadata before inserting consumer.
bs: Korisnik ima metadatu sa postojećeg mirrora. Očisti metadatu prije ubacivanja korisnika.

en: Consumer has no metadata and cannot be reactivated.
bs: Korisnik nema metadatu i ne može biti reaktiviran.

en: Consumer has no metadata to clear.
bs: Korisnik nema metadate za očistiti.

en: Consumer is already in use and cannot be inserted. Remove consumer from existing mirror first.
bs: Korisnik je već u upotrebi i ne može biti umetnut.

en: Consumer is already present on specified mirror.
bs: Korisnik je već prisutan na specificiranom mirroru.

en: Consumer is in use and cannot be cleared. Deactivate disk first.
bs: Korisnik je u upotrebi i ne može biti očišćen. Deaktiviraj disk prvo.

en: Consumer must be present on the specified mirror.
bs: Korisnik mora biti prisutan na specificiranom mirroru.

en: Consumers may only be added to a mirror if they are larger than the size of the mirror.
bs: Korisnici mogu samo biti dodani na mirror ako su veći od veličine mirrora.

en: Contact a firewall administrator for more information.
bs: Kontaktiraj firewall administraciju za više informacija.

en: Containers
bs: Kontejneri

en: Content limit
bs: Limit sadržaja

en: Continue
bs: Nastavi

en: Control
bs: Kontrola

en: Converted bridged %s
bs: Konvertovan bridgeovan %s

en: Conveyance
bs: Prijenos

en: Copy
bs: Kopiraj

en: Copy DUID
bs: Kopiraj DUID

en: Copy My MAC
bs: Kopiraj moj MAC

en: Copy gateway
bs: Kopiraj gejtvej

en: Copy gateway group
bs: Kopiraj gateway grupu

en: Copy monitor
bs: Kopiraj monitor

en: Copy of only the different or missing files.
bs: Kopija samo različitih ili fajlova koji nedostaju.

en: Copy of only the updated files.
bs: Kopija samo ažuriranih fajlova.

en: Copy phase1 entry
bs: Kopiraj phase1 unos

en: Copy pool
bs: Kopiraj pool

en: Copy route
bs: Kopiraj rutu

en: Copy the certificate signing data from here and forward it to a certificate authority for signing.
bs: Kopiraj verifikaciju certifikatskih podataka odavde te ih proslijedi autoritetu za certifikate kako bi ih mogli verifikovati.

en: Copy virtual server
bs: Kopiraj virtualni server

en: Copyright
bs: Zaštićeno

en: Copyright 2000, 2001, 2002 by Edwin Groothuis. All rights reserved.
bs: Copyright 2000, 2001, 2002 by Edwin Groothuis. Sva prava zadržana.

en: Core Critical
bs: Kritično jezgro

en: Core Warning
bs: Upozorenje jezgra

en: Could not add new queue.
bs: Nemoguće dodati novi red.

en: Could not bring greif up -- variable not defined.
bs: Nije moguće pokrenuti greif -- varijabla nije definisana.

en: Could not bring up %s interface in interface_dhcp_configure()
bs: Nije moguće pokrenuti %s interface u interface_dhcp_configure()

en: Could not create alias for %s
bs: Nemoguće kreirati alias za %s

en: Could not create new queue/discipline!
bs: Nemoguće napraviti novi red/disciplinu!

en: Could not create new queue/discipline! Any recent changes may need to be applied first.
bs: Nemoguće napraviti novi red/disciplinu! Sve nedavne promjene će trebati biti primijenjene prvo.

en: Could not extract %s RRD xml file from archive!
bs: Nije moguće raspakovati %s RRD xml fajl iz arhive!

en: Could not fetch the URL '%s'.
bs: Nemoguće doći do URLa '%s'.

en: Could not find a usable configuration file! Exiting....
bs: Nije moguće pronaći koristan konfiguracijski fajl! Napuštam...

en: Could not find any crash files.
bs: Nije moguće pronaći nijedan fajl o krahiranju.

en: Could not get a Local IP address for PPTP/L2TP link on %s in interfaces_ppps_configure. Using 0.0.0.0 ip!
bs: Nije moguće dobiti lokalnu IP adresu za PPTP/L2TP link na %s u interfaces_ppps_configure. Koristim 0.0.0.0 ip!

en: Could not get a PPTP/L2TP Remote IP address from %1$s for %2$s in interfaces_ppps_configure.
bs: Nije moguće dobiti PPTP/L2TP IP adresu sa %1$s za %2$s u interfaces_ppps_configure.

en: Could not open %s for writing
bs: Nije moguće otvoriti %s za pisanje

en: Could not open %s.
bs: Nemoguće otvoriti %s.

en: Could not open %s/aliases for writing!
bs: Nije moguće otvoriti %s/aliase za pisanje!

en: Could not open %s/ntpd.conf for writing
bs: Nemoguće otvoriti %s/ntpd.conf za pisanje

en: Could not parse %1$s/wizards/%2$s file.
bs: Nemoguće proslijediti %1$s/wizards/%2$s fajl.

en: Could not process aliases from alias: %s
bs: Nije moguće procesirati aliase iz aliasa: %s

en: Could not process empty file from alias: %s
bs: Nije moguće procesirati prazan fajl iz aliasa: %s

en: Could not process non-existent file from alias: %s
bs: Nije moguće procesirati nepostojeći fajl iz aliasa: %s

en: Could not restore config.xml.
bs: Nemoguće vratiti sigurnosnu kopiju config.xml.

en: Could not send Growl notification to %1$s -- Error: %2$s
bs: Nije moguće poslati Growl notifikaciju %1$s -- greška: %2$s

en: Could not send register Growl on %1$s -- Error: %2$s
bs: Nije moguće registrovan Growl poslati %1$s -- Greška: %2$s

en: Could not send the message to %1$s -- Error: %2$s
bs: Nije moguće poslati poruku %1$s -- Greška %2$s

en: Could not update alias for %s
bs: Nemoguće ažurirati alias za %s

en: Could not write Igmpproxy configuration file!
bs: Nije moguće pisati lgmpproxy konfiguracijski fajl!

en: Count
bs: Broj

en: Count must be between 1 and %s
bs: Broj mora biti između 1 i %s

en: Country
bs: Zemlja

en: Crash Reporter
bs: Izvještavanje o krahiranju

en: Create / Edit CA
bs: Stvori / Modifikuj CA

en: Create Certificate for User
bs: Stvori certifikat za korisnika

en: Create Phase 1
bs: Stvori Phase 1

en: Create a Certificate Signing Request
bs: Stvori zahtjev za verifikaciju certifikata

en: Create a new PPP configuration.
bs: Napravi novu PPP konfiguraciju.

en: Create an ARP Table Static Entry for this MAC & IP Address pair.
bs: Stvori ARP tablicu statičkih unosa za ovaj MAC & IP par adresa

en: Create an intermediate Certificate Authority
bs: Stvori srednji Autoritativni certifikat

en: Create an internal Certificate
bs: Stvori interni certifikat

en: Create an internal Certificate Authority
bs: Stvori interni Autoritativni Certifikat

en: Create an internal Certificate Revocation List
bs: Stvori internu listu ukinutih certifikata

en: Create interface groups
bs: Kreiraj interface grupe

en: Create new Revocation List
bs: Stvori novu listu ukinutih certifikata

en: Create new associated filter rule
bs: Kreiraj novo asocirano filter pravilo

en: Create, Generate and Activate Rolls with Vouchers
bs: Kreiraj, generiši i aktiviraj rollove sa vaučerima

en: Created
bs: Kreirano

en: Created an alias from Diagnostics - DNS Lookup page.
bs: Stvoren alias iz Dijagnostika - DNS traženje stranice

en: Created from Diagnostics-> DNS Lookup
bs: Stvoreno iz Dijagnostika -> DNS traženje

en: Created with id %s
bs: Kreirano sa id-om %s

en: Created without id
bs: Kreirano bez id-a

en: Created:
bs: Stvoreno:

en: Creating 1:1 rules...
bs: Stvaranje 1:1 pravila...

en: Creating IPsec rules...
bs: Stvaranje IPsec pravila...

en: Creating NAT rule %s
bs: Stvaranje NAT pravila %s

en: Creating SSL Certificate for this host
bs: Kreiram SSL Certifikat za ovaj host

en: Creating advanced outbound rule %s
bs: Stvaranje naprednog van opsežnog pravila %s

en: Creating aliases
bs: Stvaranje aliasa

en: Creating automatic outbound rules
bs: Stvaranje automatskih vanopsežnih pravila

en: Creating default rules
bs: Stvaranje zadanih pravila

en: Creating filter rule %s ...
bs: Stvaranje filter pravila %s ...

en: Creating filter rules %s ...
bs: Stvaranje filter pravila %s

en: Creating gateway group item...
bs: Stvaranje gateway grupnog predmeta...

en: Creating outbound NAT rules
bs: Stvaranje vanopsežnog NAT pravila

en: Creating reflection NAT rule for %s...
bs: Stvaram NAT pravilo za %s...

en: Creating reflection rule for %s...
bs: Stvaram pravilo za %s...

en: Creating restore point before package installation.
bs: Kreiranje restore tačke prije paketne instalacije.

en: Creating rrd update script
bs: Kreiram rrd skriptu za ažuriranje

en: Creating rule %s
bs: Stvaranje pravila %s

en: Creating wireless clone interfaces...
bs: Stvaram wireless clone interfacea...

en: Crypto
bs: Kripto

en: Cryptographic & Thermal Hardware
bs: Kriptografski & Termalni hardver

en: Cryptographic Hardware
bs: Kriptografski hardver

en: Cryptographic Settings
bs: Kriptografske postavke

en: Curl error occurred:
bs: Curl greška pronađena:

en: Current
bs: Trenutno

en: Current Auth Error Page
bs: Trenutna stranica autentikacijske greške

en: Current Base System
bs: Trenutni bazni sistem

en: Current Date/Time
bs: trenutni datum/vrijeme

en: Current Logout Page
bs: Trenutna logout stranica

en: Current Pool Members
bs: Trenutni članovi Poola

en: Current Portal Page
bs: Trenutna portal stranica

en: Current Source Tracking Entries
bs: Trenutni unosi praćenja izvora

en: Current configuration
bs: Trenutna konfiguracija

en: Current date/time
bs: Trenutni datum/vrijeme

en: Current space used by backups
bs: Trenutni prostor iskorišten za backupe

en: Currently Revoked Certificates for CRL
bs: Trenutni ukinuti certifikati za CRL

en: Currently viewing:
bs: Trenutno gledam:

en: Custom
bs: Posebno

en: Custom Access Restrictions
bs: Posebne zabrane pristupa

en: Custom Bandwidths are greater than 30%. Please lower them for the wizard to continue.
bs: Posebni protoci su veći od 30%. Molimo smanjite ih za nastavak wizarda.

en: Custom Bandwidths are greater than 40%. Please lower them for the wizard to continue.
bs: Posebni protoci su veći od 40%. Molimo smanjite ih za nastavak wizarda.

en: Custom Settings
bs: Svojstvene postavke

en: Custom commands...
bs: Vlastite komande...

en: Custom options
bs: Specifične opcije

en: Custom reset
bs: Posebno resetovanje

en: DANGER!  WARNING!  ACHTUNG!
bs: UPOZORENJE! UPOZORENJE! UPOZORENJE!

en: DDNS Client Updates
bs: DDNS ažuriranja klijenta

en: DDNS Domain
bs: DDNS domena

en: DDNS Domain Key name
bs: DDNS ime ključa domene

en: DDNS Domain Key secret
bs: DDNS tajni ključ domena

en: DDNS Hostname
bs: DDNS host ime

en: DDNS Hostnames
bs: DDNS host imena

en: DES is no longer supported, IPsec phase 1 item '%s' is being disabled.
bs: DES više nije podržan, IPsec faza 1 '%s' se isključuje.

en: DES is no longer supported, IPsec phase 2 item '%s' is being disabled.
bs: DES više nije podržan, IPsec faza 2 '%s' se isključuje.

en: DHCP Client Configuration
bs: DHCP Client Konfiguracija

en: DHCP Events (DHCP Daemon, DHCP Relay, DHCP Client)
bs: DHCP eventi (DHCP daemon, DHCP relay, DHCP klijent)

en: DHCP Leases
bs: DHCP najmovi

en: DHCP Leases Status
bs: DHCP status posudbe

en: DHCP Registration
bs: DHCP registracija

en: DHCP Relay
bs: DHCP Relej

en: DHCP Relay Configuration
bs: DHCP relej konfiguracija

en: DHCP Relay is currently enabled. DHCP Server canot be enabled while the DHCP Relay is enabled on any interface.
bs: DHCP relej je trenutno uključen. DHCP server ne može biti uključen dok je DHCP relej uključen na bilo kojem interfaceu.

en: DHCP Server
bs: DHCP server

en: DHCP Server is currently enabled. Cannot enable the DHCP Relay service while the DHCP Server is enabled on any interface.
bs: DHCP server je trenutno uključen. Nemoguće uključiti DHCP relej servis dok je DHCP server uključen na bilo kojem interfaceu.

en: DHCP Server must be enabled for DHCP Registration to work in DNS Forwarder.
bs: DHCP server mora biti uključen za DHCP registraciju da bi funkcionisala u DNS forwarderu.

en: DHCP Server must be enabled for DHCP Registration to work in DNS Resolver.
bs: DHCP server mora biti uključen za DHCP registraciju da bi funkcionisala u DNS resolveru.

en: DHCP Server settings
bs: DHCP server postavke

en: DHCP Service
bs: DHCP Servis

en: DHCP Static Mappings for this Interface
bs: DHCP statička mapiranja za ovaj interface

en: DHCP alias address
bs: DHCP alias adresa

en: DHCP6 Client Configuration
bs: DHCP6 Konfiguracija klijenta

en: DHCPv6 Leases
bs: DHCPv6 najmovi

en: DHCPv6 Options
bs: DHCPv6 opcije

en: DHCPv6 Prefix Delegation size
bs: DHCPv6 Veličina delegacije prefiksa

en: DHCPv6 Prefix Delegation size must be provided when Send IPv6 prefix hint flag is checked
bs: DHCPv6 veličina prefiks delegacije mora biti data kada Send IPv6 prefiks hint oznaka je označena.

en: DHCPv6 Relay
bs: DHCPv6 Relej

en: DHCPv6 Relay Configuration
bs: DHCPv6 relej konfiguracija

en: DHCPv6 Relay is currently enabled. DHCPv6 Server canot be enabled while the DHCPv6 Relay is enabled on any interface.
bs: DHCPv6 Relej je trenutno uključen. DHCPv6 server ne može biti uključen dok je DHCPv6 relej uključen na bilo kojem interfaceu.

en: DHCPv6 Server is currently enabled. Cannot enable the DHCPv6 Relay service while the DHCPv6 Server is enabled on any interface.
bs: DHCPv6 server je trenutno uključen. Nemoguće uključiti DHCPv6 relej servis dok je DHCPv6 server uključen na bilo kojem interfaceu.

en: DHCPv6 Static Mappings for this Interface
bs: DHCPv6 statička mapiranja za ovaj interface

en: DNS Configuration
bs: DNS konfiguracija

en: DNS Default Domain
bs: DNS zadana domena

en: DNS Domain
bs: DNS domena

en: DNS Domain key
bs: DNS Domen ključ

en: DNS Domain key secret
bs: Tajni ključ DNS domene

en: DNS Events (Resolver/unbound, Forwarder/dnsmasq, filterdns)
bs: DNS eventi (Resolver/neopsežno, prosljeđivač/dnsmasq, filterdns)

en: DNS Forwarder and DNS Resolver configurations
bs: DNS prosljeđivač i razrješivač konfiguracija

en: DNS Lookup
bs: DNS traženje

en: DNS Query Forwarding
bs: DNS forwardanje po upitu

en: DNS Rebind Check
bs: DNS provjera ponovne dodjele

en: DNS Resolver configured.
bs: DNS resolver konfigurisan.

en: DNS Server Override
bs: Overrideanje DNS servera

en: DNS Server Settings
bs: DNS Server Postavke

en: DNS Server enable
bs: DNS server uključi

en: DNS Server(s)
bs: DNS server(i)

en: DNS Servers
bs: DNS Serveri

en: DNS error encountered. Stop updating for 30 minutes.
bs: DNS greškapronađena. Stanka ažuriranja za 30 minuta.

en: DNS group is current, no update performed.
bs: DNS grupa je trenutna i ažuriranje nije izvršeno.

en: DNS group update is successful.
bs: DNS ažuriranje uspješno.

en: DNS hostname update successful.
bs: Ažuriranje DNS host imena uspješno.

en: DNS server(s)
bs: DNS server(i)

en: DNS servers
bs: DNS serveri

en: DNSCACHE: Found old IP %1$s and new IP %2$s
bs: DNSCACHE: Pronašao stari IP %1$s i novi IP %2$s

en: DNSKEYs are fetched earlier in the validation process when a Delegation signer is encountered
bs: DNSKEY ključevi su preuzeti ranije u procesu validacije kada se naišlo na Delegation signer-a.

en: DNSSEC data is required for trust-anchored zones.
bs: DNSSEC podaci su potrebni za zone zasnovane na povjerenju.

en: Daily
bs: Dnevno

en: Daily (0 0 * * *)
bs: Dnevno (0 0 * * *)

en: Danger, Latency
bs: Opasnost, kašnjenje

en: Danger, Packetloss
bs: Opasnost, gubitak paketa

en: Dark gray
bs: Tamno siva

en: Dashboard
bs: Kontrolna ploča

en: Dashboard Columns
bs: Kolone kontrolne ploče

en: Dashboard check
bs: Provjera korisničke ploče

en: Data
bs: Podaci

en: Data Payload
bs: Nosivost podataka

en: Data points
bs: Tačke sa podacima

en: Database Error - There was a server-sided database error.
bs: Greška u bazi podataka - Postoji greška na server strani baze podataka.

en: Datagram conversion error
bs: Greška pri datagram konverziji

en: Date
bs: Datum

en: Date of last update of table is unknown.
bs: Datum zadnjeg ažuriranja tablice je nepoznat

en: Day(s)
bs: Dan(i)

en: Deactivate
bs: Deaktiviraj

en: Deactivate consumer from mirror
bs: Deaktiviraj korisnika sa mirrora

en: Dead Peer Detection
bs: Detekcija ugašenog peera

en: December
bs: Decembar

en: Dedicated Links
bs: Posvećeni linkovi

en: Default
bs: Zadano

en: Default (No hostname)
bs: Zadano (bez hostnamea)

en: Default (any)
bs: Zadano (bilo koji)

en: Default (no preference, typically autoselect)
bs: Zadano (bez preference, tipično autoselekt)

en: Default Access Restrictions
bs: Zadane zabrane pristupa

en: Default BIOS file name
bs: Zadano BIOS ime fajla

en: Default Gateway
bs: Zadani gejtvej

en: Default Queue
bs: Zadani red

en: Default download (Kbit/s)
bs: Zadani download (Kbit/s)

en: Default gateway
bs: Zadani gejtvej

en: Default gateway switching
bs: Zadano prebacivanje gatewaya

en: Default lease time
bs: Zadano vrijeme posudbe

en: Default lease time (Seconds)
bs: Zadano vrijeme posudbe ( u sekundama )

en: Default preferred lifetime
bs: Zadani preferirani životni vijek

en: Default registers host name option supplied by DHCP client.
bs: Zadane registracije opcije host imena podržane od strane DHCP klijenta.

en: Default rules for each interface have been created.
bs: Zadana pravila za svaki interface su kreirana.

en: Default upload (Kbit/s)
bs: Zadani upload (Kbit/s)

en: Default valid lifetime
bs: Zadani validan životni vijek

en: Defaults to 1 if APN is set. Ignored if no APN is set.
bs: Zadano je 1 ako je APN postavljen. Ignorisano ako nema APN.

en: Define data payload to send on ICMP packets to gateway monitor IP.
bs: Definišite nosivost podataka koju je moguće slati ICMP paketima za praćenje gejtvej IPa.

en: Defined by
bs: Definisano od

en: Defines the TTL threshold for the network interface. Packets with a lower TTL than the threshold value will be ignored. This setting is optional, and by default the threshold is 1.
bs: Definira TTL odstupanje za mrežni interface. Paketi sa nižim TTLom od vrijednosti odstupanja će biti ignorisani. Ova postavka nije obavezna, i zadano odstupanje je 1.

en: Defines the time in minutes that a user is allowed access. The clock starts ticking the first time a voucher is used for authentication.
bs: Definira vrijeme u minutama u kojem je korisniku dozvoljen pristup. Sat počne kucati čim se prvi vaučer iskoristi za autentikaciju.

en: Deinstall commands...
bs: Komande deinstalacije...

en: Delay
bs: Kašnjenje

en: Delay (ms)
bs: Kašnjenje (ms)

en: Delay between requesting peer acknowledgement.
bs: Odlaganje između traženja peerova.

en: Delay must be an integer.
bs: Kašnjenje mora biti cijeli broj.

en: Delegated Prefixes
bs: Delegirani prefiksi

en: Delete
bs: Obriši

en: Delete ACL
bs: Obriši ACL

en: Delete CA and its CRLs
bs: Obriši CA i njegove CRLove

en: Delete CRL
bs: Obriši CRL

en: Delete CSC Override
bs: Obriši CSC override

en: Delete Certificate
bs: Obriši certifikat

en: Delete Device
bs: Obriši uređaj

en: Delete GIF interface
bs: Obriši GIF interface

en: Delete GRE interface
bs: Obriši GRE interface

en: Delete IGMP entry
bs: Obriši IGMP unos

en: Delete IP
bs: Obriši IP

en: Delete LAGG interface
bs: Obriši LAGG interface

en: Delete MAC address
bs: Obriši MAC adresu

en: Delete NDP entry
bs: Obriši NDP unos

en: Delete P1s
bs: Obriši P1

en: Delete PPP interface
bs: Obriši PPP interface

en: Delete PPPoE instance
bs: Obriši PPPoE instancu

en: Delete Privilege
bs: Obriši privilegiju

en: Delete Q-in-Q interface
bs: Obriši Q-in-Q interface

en: Delete Queue from this Interface
bs: Obriši red iz ovog interfacea

en: Delete VLAN
bs: Obriši VLAN

en: Delete WiFi interface
bs: Obriši WiFi interface

en: Delete alias
bs: Obriši alias

en: Delete arp cache entry
bs: Obriši arp unos keša

en: Delete client
bs: Obriši klijenta

en: Delete config
bs: Obriši konfiguraciju

en: Delete domain override
bs: Obriši override domene

en: Delete file
bs: Obriši fajl

en: Delete gateway
bs: Obriši gejtvej

en: Delete gateway group
bs: Obriši gateway grupu

en: Delete group
bs: Obriši grupu

en: Delete host override
bs: Obriši host override

en: Delete hostname
bs: Obriši hostname

en: Delete interface
bs: Obriši interface

en: Delete interface bridge
bs: Obriši bridge interfacea

en: Delete key
bs: Obriši ključ

en: Delete lease
bs: Obriši posudbu

en: Delete mapping
bs: Obriši mapiranje

en: Delete monitor
bs: Obriši monitor

en: Delete phase1 entry
bs: Obriši phase1 unos

en: Delete phase2 entry
bs: Obriši phase2 unos

en: Delete pool
bs: Obriši pool

en: Delete route
bs: Obriši rutu

en: Delete rule
bs: Obriši pravilo

en: Delete schedule
bs: Obriši raspored

en: Delete selected P1s
bs: Obriši odabrane P1

en: Delete selected map
bs: Obriši selektovanu mapu

en: Delete selected mappings
bs: Obriši označena mapiranja

en: Delete selected maps
bs: Obriši selektovane mape

en: Delete selected rules
bs: Obriši označena pravila

en: Delete selected users
bs: Obriši označene korisnike

en: Delete server
bs: Obriši server

en: Delete service
bs: Obriši servis

en: Delete static mapping
bs: Obriši statičko mapiranje

en: Delete this certificate from the CRL
bs: Obriši ovaj certifikat sa CRL

en: Delete this item
bs: Obriši ovu stavku

en: Delete this queue
bs: Obriši ovaj red

en: Delete this rule
bs: Obriši ovo pravilo

en: Delete user
bs: Obriši korisnika

en: Delete virtual ip
bs: Obriši virtualni ip

en: Delete virtual server
bs: Obriši virtualni server

en: Delete voucher roll
bs: Obriši voucher roll

en: Delete zone
bs: Obriši zonu

en: Delete/Reset tunable
bs: Obriši/Resetuj opciju za štimanje

en: Deleted Certificate %1$s from CRL %2$s.
bs: Obrisan certifikat %1$s sa CRL %2$s

en: Deleted IPsec Pre-Shared Key
bs: Obrisan IPsec Ranije-Dijeljeni ključ

en: Deleted OpenVPN client specific override %1$s %2$s
bs: Obrisan OpenVPN specifični klijentni override %1$s %2$s

en: Deleted OpenVPN client to server %1$s:%2$s %3$s
bs: Obrisan OpenVPN klijent ka serveru %1$s:%2$s %3$s

en: Deleted OpenVPN server from %1$s:%2$s %3$s
bs: Obrisan OpenVPN server od %1$s:%2$s %3$s

en: Deleted a L2TP VPN user.
bs: Obrisan L2TP VPN korisnik.

en: Deleted a check IP service.
bs: Obrisan IP servis za provjeru

en: Deleted a device from WOL configuration.
bs: Obrisan uređaj sa WOL konfiguracije.

en: Deleted a firewall alias.
bs: Obrisan firewall alias.

en: Deleted a virtual IP.
bs: Obrisan virtuelni IP.

en: Deleted backup with timestamp %1$s and description "%2$s".
bs: Obrisan backup sa vremenom %1$s i opisom "%2$s".

en: Deleted crash report files from local disk.
bs: Obrisan izvještaj krahiranja fajlova sa lokalnog diska.

en: Deleted empty OpenVPN client
bs: Obrisan prazan OpenVPN klijent

en: Deleted empty OpenVPN server
bs: Obrisan prazan OpenVPN server

en: Deleted selected IPsec Phase 1 entries.
bs: Obrisani selektovani IPsec Phase 1 unosi.

en: Deleted selected IPsec Phase 2 entries.
bs: Obrisani selektovani IPsec Phase 2 unosi.

en: Denied clients will be ignored rather than rejected.
bs: Odbijeni klijenti će radije biti ignorisani nego odbijeni.

en: Deny
bs: Odbij

en: Deny Nonlocal
bs: Zabrani nelokalne

en: Deny mode 6 control message trap service (notrap).
bs: Odbij način 6 kontrolne poruke trap servisa (notrap).

en: Deny packets that attempt a peer association (nopeer).
bs: Odbij pakete koji poušavaju asocijaciju peera (nopeer).

en: Deny router advertisements for interface %s
bs: Odbijanje router reklama za interface %s

en: Deny run-time Configuration (nomodify) by ntpq and ntpdc.
bs: Odbij run-time konfiguraciju (nomodify) od ntpq i ntpdc.

en: Deny unknown clients
bs: Odbij nepoznate klijente

en: Depending on the way the WAN connection is setup, this may also need a %1$sVirtual IP%2$s.
bs: U zavisnosti od postavke WAN konekcije, može biti potrebno %1$sVirtual IP%2$s

en: Description
bs: Opis

en: Descriptions may not start or end with vertical bar (|) or contain double vertical bar ||.
bs: Opisi ne smiju počinjati ili završavati sa uspravnom crtom (|) i ne smiju sadržavati dvostruku uspravnu crtu ||.

en: Descriptions must be less than 200 characters long.
bs: Opisi moraju imati manje od 200 karaktera.

en: Descriptive name
bs: Deskriptivno ime

en: Dest. Address
bs: Destinacijska Adresa

en: Dest. Ports
bs: Destinacijski portovi

en: Destination
bs: Destinacija

en: Destination Address
bs: Destinacijska adresa

en: Destination IP
bs: Destinacijski IP

en: Destination IP Address
bs: Destinacijska IP adresa

en: Destination IPs
bs: Destinacijski IPovi

en: Destination IPv6 prefix
bs: Destinacijski IPv6 prefiks

en: Destination Port
bs: Destinacijski port

en: Destination Port Range
bs: Domet destinacijskog porta

en: Destination Ports
bs: Destinacijski portovi

en: Destination Server
bs: Destnacijski server

en: Destination Server IP address %s is not a valid IPv4 address.
bs: Destinacijska IP adresa %s nije validna IPv4 adresa.

en: Destination Server IP address %s is not a valid IPv6 address.
bs: Destinacijska IP adresa servera %s nije validna IPv6 adresa.

en: Destination address
bs: Destinacijska adresa

en: Destination addresses
bs: Destinacijske adrese

en: Destination bit count
bs: Broj destinacijskih bitova

en: Destination must be IPv4.
bs: Destinacija mora biti IPv4.

en: Destination network
bs: Destinacijska mreža

en: Destination network bit count
bs: Bit brojač destinacijske mreže

en: Destination network for the outbound NAT mapping.
bs: Desinacijska mreža za vanopsežno NAT mapiranje

en: Destination network for this static route
bs: Destinacijska mreža za ovu statičku rutu

en: Destination not
bs: Ne destinacija

en: Destination port from
bs: Destinacijski port od

en: Destination port to
bs: Destinacijski port ka

en: Destination prefix
bs: Destinacijski prefiks

en: Destination server
bs: Destinacijski server

en: Destination unreachable
bs: Destinacija nije dokučiva

en: Detected link-up on interface %1$s.%2$s
bs: Detektovana poveznica na interface %1$s.%2$s

en: Device
bs: Uređaj

en: Device %s does not exist. PPP link cannot start without the modem device.
bs: Uređaj %s ne postoji. PPP link se ne može pokrenuti bez modema.

en: Device does not exist, bailing.
bs: Uređaj ne postoji, izlazim.

en: Device: /dev/
bs: Uređaj: /dev/

en: Devices with a Pulse Per Second output such as radios that receive a time signal from DCF77 (DE), JJY (JP), MSF (GB) or WWVB (US) may be used as a PPS reference for NTP. A serial GPS may also be used, but the serial GPS driver would usually be the better option. A PPS signal only provides a reference to the change of a second, so at least one other source to number the seconds is required.<br /><br />At least 3 additional time sources should be configured under <a href="services_ntpd.php">Services > NTP > Settings</a> to reliably supply the time of each PPS pulse.
bs: Uređaji sa Pulse po sekundi izlazom kao radio uređaji koji dobijaju vremenski signal od DCF77 (DE), JJY (JP), MSF (GB) ili WWVB(US) može biti korištena kao PPS referenca za NTP. Serijski GPS može biti korišten, ali serijski GSP driver bi obično bio bolja opcija. PPS signal samo daje referencu u promjeni sekunde, tako da barem jedan drugi izvor broja sekundi je potreban. <br /><br />Barem tri dodatna izvora vremena trebaju biti konfigurisana pod<a href="services_ntpd.php">Servisi > NTP > Postavke</a> da bi bili sigurni za vrijeme svakog PPS pulse-a.

en: Diag
bs: Diagnoza

en: Diagnostics
bs: Dijagnostika

en: Dial On Demand
bs: Zovi na poziv

en: Dial on demand
bs: Pozovi na zahtjev

en: Diff
bs: Razlika

en: Diffie-Hellman (DH) parameter set used for key exchange.%1$s%2$s%3$s
bs: Diffie-Hellman (DH) parametarski skup korišten za razmjenu ključeva %1$s%2$s%3$s

en: Diffserv Code Point
bs: Diffserv Kod Point

en: Direction
bs: Smjer

en: Disable
bs: Isključi

en: Disable ACF compression (auto-negotiated by default)
bs: Isključi ACF kompresiju (automatski postavljena zadano).

en: Disable Auto-added Access Control
bs: Isključite automatski dodanu kontrolu pristupa

en: Disable Auto-added Host Entries
bs: Isključi automatski dodane host unose

en: Disable Auto-added VPN rules
bs: Isključi automatski-dodana VPN pravila

en: Disable Concurrent user logins
bs: Isključi istovremene prijave korisnika

en: Disable DHCP Registration features in DNS Forwarder before disabling DHCP Server.
bs: Isključite DHCP registracijske mogućnosti u DNS prosljeđivaču prije isključivanja DHCP servera.

en: Disable DHCP Registration features in DNS Resolver before disabling DHCP Server.
bs: Isključite DHCP registracijske mogućnosti u DNS resolveru prije isključivanja DHCP servera.

en: Disable DNS Forwarder
bs: Isključi DNS forwarder

en: Disable DNS Rebinding Checks
bs: Isključi DNS provjeru ponovne dodjele

en: Disable Firewall
bs: Isključi firewall

en: Disable Firewall Scrub
bs: Isključi firewall scrub

en: Disable Gateway Monitoring
bs: Isključi praćenje gejtveja

en: Disable Gateway Monitoring Action
bs: Isključi radnje praćenja gejtveja

en: Disable Growl
bs: Isključi Growl

en: Disable Growl Notifications
bs: Isključi Growl notifikacije

en: Disable HTTPS Forwards
bs: Isključi HTTPS prosljeđivanje

en: Disable HTTP_REFERER enforcement check
bs: Isključi forsiranje provjere za HTTP_REFERER

en: Disable MAC filtering
bs: Isključi MAC filtriranje

en: Disable Negate rule on policy routing rules
bs: Isključi pravilo negiranja na pravilu usmjeravanja

en: Disable Negate rules
bs: Isključi pravila negacije

en: Disable Outbound NAT rule generation.%s(No Outbound NAT rules)
bs: Isključi vanopsežno NAT pravilo. %s(Bez vanopsežnih NAT pravila)

en: Disable Protocol compression (auto-negotiated by default)
bs: Isključi protokol kompresiju (automatski postavljeno zadano)

en: Disable Reauth
bs: Isključi reautentikaciju

en: Disable SMTP
bs: Isključi SMTP

en: Disable SMTP Notifications
bs: Isključi SMTP notifikacije

en: Disable all auto-added VPN rules.
bs: Isključi sva automatski dodana VPN pravila.

en: Disable all except ntpq and ntpdc queries (noserve).
bs: Isključi sve osim ntpq i ntpdc upita (noserve).

en: Disable all packet filtering.
bs: Isključi svo paketno filtriranje.

en: Disable auto generated reply-to for this rule.
bs: Isključi automatski generisan odgovor-ka za ovo pravilo.

en: Disable automatic filtering of the outer GIF source which ensures a match with the configured remote peer. When disabled, martian and inbound filtering is not performed which allows asymmetric routing of the outer traffic.
bs: Isključi automatsko filtriranje vanjskog GIF izvora koji osigurava poklapanje sa konfigurisanim udaljenim peerom. Kada je isključeno, martian i unutaropsežno filtriranje neće biti vršeno što dozvoljava asimetrično preusmjeravanje vanjskog prometa.

en: Disable broadcasting of the SSID for this network (This may cause problems for some clients, and the SSID may still be discovered by other means.)
bs: Isključi prenose SSID za ovu mrežu (Ovo može uzrokovati probleme za neke klijente i SSID može biti otkriven u nekim drugim kontekstima)

en: Disable client
bs: Isključi klijenta

en: Disable details in alias popups
bs: Isključi detalje u alias popupima

en: Disable expansion of this entry into IPs on NAT lists (e.g. 192.168.1.0/24 expands to 256 entries.)
bs: Isključite ekspanziju ovog unosa u IPove na NAT listama (npr 192.168.1.0/24 se širi na 256 unosa.)

en: Disable gateway
bs: Isključi gejtvej

en: Disable hardware TCP segmentation offload
bs: Isključi hardversku TCP segmentaciju offload

en: Disable hardware checksum offload
bs: Isključi hardverski checksum offload

en: Disable hardware large receive offload
bs: Isključi veliku hardversku pošiljku offload

en: Disable logging of webConfigurator successful logins
bs: Isključi logovanje webConfigurator uspješnih logina

en: Disable ntpq and ntpdc queries (noquery).
bs: Isključi ntpq i ntpdc upite (noquery).

en: Disable password login for Secure Shell (RSA/DSA key only)
bs: Isključi prijavljivanje lozinkom za sigurni shell (RSA/DSA ključevi samo)

en: Disable redirection for traffic matching this rule
bs: Isključi redirekciju za promet koji se poklapa ovim pravilom

en: Disable rekey
bs: Isključi ponovni unos

en: Disable reply-to
bs: Isključi odgovori-ka

en: Disable reply-to on WAN rules
bs: Isključi odgovor-ka na WAN pravilima

en: Disable route
bs: Isključi rutu

en: Disable service
bs: Isključi servis

en: Disable shortseq (auto-negotiated by default).
bs: isključi shortseq (automatski postavljena zadano).

en: Disable tcpmssfix (enabled by default).
bs: Isključi tcpmssfix (uključeno kao zadano).

en: Disable the automatic dashboard auto-update check
bs: Isključi automatsku provjeru ažuriranja kontrolne ploče

en: Disable the automatically-added access control entries
bs: Isključi automatski dodan pristup kontrolnim unosima

en: Disable the automatically-added host entries
bs: Isključi automatski-dodane host unose

en: Disable the startup/shutdown beep
bs: Isključi zvuk pri pokretanju/gašenju

en: Disable this client
bs: Isključi ovog klijenta

en: Disable this gateway
bs: Isključi ovaj gejtvej

en: Disable this override
bs: Isključi ovaj override

en: Disable this phase 2 entry without removing it from the list.
bs: Isključi ovaj phase 2 unos bez njegovog uklanjanja sa liste.

en: Disable this rule
bs: Isključi ovo pravilo

en: Disable this server
bs: Isključi ovaj server

en: Disable this static route
bs: Isključi ovu statičku rutu

en: Disable vjcomp (compression, auto-negotiated by default).
bs: Isključite vjcomp (kompresija, automatski se postavlja zadano).

en: Disable vjcomp(compression) (auto-negotiated by default).%1$sThis option enables Van Jacobson TCP header compression, which saves several bytes per TCP data packet. This option is almost always required. Compression is not effective for TCP connections with enabled modern extensions like time stamping or SACK, which modify TCP options between sequential packets.
bs: Isključi vjcomp(kompresiju)(automatski se konfiguriše zadanim postavkama). %1$sOva opcija uključuje Van Jacobson TCP header kompresiju, koja spašava nekoliko bajtova po TCP data paketu. Ova opcija je gotovo uvijek potrebna. Kompresija nije efektivna za TCP konekcije sa uključenim modernim ekstenzijama kao stamping vremena ili SACK, koje modifikuju TCP opcije između uzatopnih paketa.

en: Disable webConfigurator anti-lockout rule
bs: Isključi webConfigurator anti-lockout pravilo

en: Disable webConfigurator redirect rule
bs: Isključi webConfigurator pravilo redirektanja

en: Disable writing log files to the local disk
bs: Isključi pisanje log fajlova na lokalni disk

en: Disabled
bs: Isključeno

en: Disabled / Locked Hostname.
bs: Onemogućeno/Zaključano host ime

en: Disabled a check IP service.
bs: Isključen IP servis za provjeru

en: Disabled the default check IP service.
bs: Isključen zadani IP servis za provjeru.

en: Disables renegotiation when a connection is about to expire.
bs: Isključuje ponovno stavljanje kada konekcija treba da istekne.

en: Disables the PF scrubbing option which can sometimes interfere with NFS traffic.
bs: Isključuje PF scrub opciju koja ponekad može da međudjeluje sa NFS prometom.

en: Disconnect
bs: Odspoji

en: Disconnect All Users
bs: Diskonektuj sve korisnike

en: Disconnect Child SA
bs: Odspoji dijete SA

en: Disconnect VPN
bs: Diskonektuj VPN

en: Disconnect all active users
bs: Odspoji sve aktivne korisnike

en: Disconnect this User
bs: Diskonektuj ovog korisnika

en: Disconnected
bs: Odspojeno

en: Disk Usage
bs: Korištenje diska

en: Disk space currently used by log files is:
bs: Iskorištenost diska trenutno od log fajlova je:

en: Disk usage
bs: Korištenje diska

en: Display
bs: Prikaži

en: Display Advanced
bs: Prikaz naprednog

en: Display Custom Options
bs: Prikaži posebne opcije

en: Display OpenVPN's internal routing table for this server.
bs: Prikaži OpenVPN internu routing tablicu za ovaj server.

en: Display Zone
bs: Prikaz zone

en: Display as column
bs: Prikaži kao kolonu

en: Display as second row
bs: Prikaži kao drugi red

en: Display extended GPS status (default: checked).
bs: Prikaži prošireni GPS status (zadano: odabrano).

en: Display page name first in browser tab
bs: Prikaži prvo ime stranice u browser kartici

en: Display settings:
bs: Prikaži postavke:

en: Displaying page %1$s of %2$s
bs: Prikazujem stranicu %1$s od %2$s

en: Displaying the Help page because it is the first page this user has privilege for.
bs: Prikazivanje Help stranice jer je to prva stranica za koju ovaj korisnik ima privilegiju.

en: Distance must be an integer.
bs: Udaljenost mora biti cijeli broj.

en: Distance setting (meters)
bs: Postavke udaljenosti (metri)

en: Distinguished Name
bs: Skriveno ime

en: Distinguished name
bs: Razlikovanje imena

en: Distinguished name City
bs: Skriveno ime Grad

en: Distinguished name Common Name
bs: Skriveno ime Zajedničko Ime

en: Distinguished name Country Code
bs: Skriveno ime Kod države

en: Distinguished name Email Address
bs: Skriveno ime Email adresa

en: Distinguished name Organization
bs: Skriveno ime Organizacija

en: Distinguished name State or Province
bs: Skriveno ime Država ili pokrajina

en: Distributes outgoing traffic using a round-robin scheduler through all active ports and accepts incoming traffic from any active port.
bs: Raspoređuje odlazeći saobraćaj koristeći round-robin raspodjelu kroz sve aktivne portove i prihvata dolazeći saobraćaj sa bilo kojeg aktivnog porta.

en: Diversity
bs: Različitost

en: Do NOT send Netgate Device ID with user agent
bs: NE šalji Netgate Uređaj ID

en: Do Not Check
bs: Ne provjeravaj

en: Do VLANs need to be set up first?
bs: Da li VLANovi trebaju prvo biti postavljeni?

en: Do not NAT
bs: Nemoj NAT

en: Do not allow PD/Address release
bs: Ne dozvoli puštanje PD/Adresa

en: Do not automatically sync to other CARP members
bs: Ne sinhronizuj automatski sa ostalim CARP članovima

en: Do not backup RRD data (NOTE: RRD Data can consume 4+ megabytes of config.xml space!)
bs: Ne spašavaj kopiju RRD podataka (NAPOMENA: RRD podaci mogu koristiti 4+ megabajta config.xml prostora)

en: Do not backup package information.
bs: Ne spašavaj kopiju paketnih informacija.

en: Do not create rules when gateway is down
bs: Ne stvaraj pravila kada gejtvej nije uključen

en: Do not delay ACK to try and piggyback it onto a data packet
bs: Ne odgađaj ACK i pokušaj ga staviti na kraj data paketa

en: Do not display state table without a filter
bs: Ne prikazuj tablicu stanja bez filtera

en: Do not execute operating system commands to install routes. Instead, pass routes to --route-up script using environmental variables.
bs: Ne izvršavaj komande operativnog sistema za instaliranje ruta. Umjesto toga, daj rute --route-up skripti koristeći prostorne varijable.

en: Do not forward private reverse lookups
bs: Ne prosljeđuj privatne obrnute zahtjeve traženja

en: Do not generate local IPv6 DNS entries for LAN interfaces
bs: Ne generiši lokalne IPv6 DNS unose za LAN interfejse

en: Do not kill connections when schedule expires
bs: Ne uništavaj konekcije kada raspored istekne

en: Do not perform binat for the specified address
bs: Ne vrši binat na specificiranu adresu

en: Do not send ICMP port unreachable messages for closed UDP ports
bs: Ne šalji ICMP port poruke o nedostupnosti za zatvorene UDP portove

en: Do not specify both a Service name and a NULL Service name.
bs: Ne specificiraj i ime servisa i NULL ime servisa.

en: Do not strip away parts of the username after the @ symbol
bs: Ne odsijecaj dijelove korisničkog imena nakon simbola @.

en: Do not use the DNS Forwarder/DNS Resolver as a DNS server for the firewall
bs: Ne koristi DNS Prosljeđivač/Resolver kao DNS server za firewall

en: Do not use this clock, display for reference only (default: unchecked).
bs: Ne koristi ovaj sat, prikaži ga samo reference radi (zadano: nije odabrano).

en: Do not wait for a RA
bs: Ne čekaj na RA

en: Do reverse DNS lookup
bs: Uradi obostrano DNS traženje

en: Do you really want to reset the selected states?
bs: Da li stvarno želite resetovati odabrana stanja

en: Do you want to proceed [y|n]?
bs: Da li želite nastaviti [y|n]?

en: Documentation
bs: Dokumentacija

en: Domain
bs: Domena

en: Domain Override Options
bs: Opcije overrideanja domene

en: Domain Overrides
bs: Overrideovi domene

en: Domain name
bs: Ime domene

en: Domain of the host%1$se.g.: "example.com"
bs: Domena hosta%1$snpr: "example.com"

en: Domain override configured for DNS Resolver.
bs: Domen overrideanje konfigurisano za DNS resolver

en: Domain override deleted from DNS Resolver.
bs: Domen overrideanje obrisano sa DNS resolvera.

en: Domain search list
bs: Lista za pretragu domena

en: Domain to override (NOTE: this does not have to be a valid TLD!)%1$se.g.: test or mycompany.localdomain or 1.168.192.in-addr.arpa
bs: Domena da se overridea (NAPOMENA: ovo ne mora biti validan TLD!)%1$snpr: test ili mycompany.localdomain ili 1.168.192.in-addr.arpa

en: Domain whose lookups will be directed to a user-specified DNS lookup server.
bs: Domena čija traženja će biti usmjerena ka korisnički-definisanom DNS lookup serveru.

en: Domains to Override with Custom Lookup Servers
bs: Domene za Overrideanje sa posebnim lookup serverima

en: Don't add or remove routes automatically
bs: Nemoj dodavati ili uklanjati rute automatski

en: Don't add/remove routes
bs: Ne dodaji/uklanjaj rute

en: Don't forget to add a firewall rule for the virtual server/pool after finished setting it up.
bs: Ne zaboravite dodati firewall pravilo za virtualni server/pool nakon što se završili sa njegovim postavljanjem.

en: Don't forget to add a firewall rule to permit traffic from L2TP clients.
bs: Ne zaboravite dodati firewall pravilo za zabranu prometa od L2TP klijenata.

en: Don't forget to add a firewall rule to permit traffic from PPPoE clients.
bs: Ne zaboravite dodati firewall pravilo za zabranu prometa od PPPoE klijenata.

en: Don't forget to adjust the DHCP Server range if needed after applying.
bs: Ne zaboravite podesiti DHCP domet servera ako bude potrebno nakon prihvatanja.

en: Don't forget to enable the DHCP server on the captive portal interface! Make sure that the default/maximum DHCP lease time is higher than the hard timeout entered on this page. Also, the DNS Forwarder or Resolver must be enabled for DNS lookups by unauthenticated clients to work.
bs: Ne zaboravite uključiti DHCP server na interfaceu zabranjenog portala! Pobrinite se da zadana/maksimalna vrijednost vremena DHCP posudbe je veća od hard timeouta unesenog na stranici. Također, DNS forwarder ili resolver moraju biti uključeni za DNS traženja po neautentikovanim klijentima da bi radilo.

en: Don't pull routes
bs: Ne povlači ove rute

en: Don't show last activity
bs: Ne prikazuj posljednju aktivnost

en: Done
bs: Završeno

en: Done.
bs: završeno.

en: Dont load descriptions
bs: Ne učitavaj opise unosa

en: Double quotes aren't allowed.
bs: Dupli navodnici nisu dozvoljeni.

en: Down
bs: Ugašen

en: Download
bs: Preuzmi

en: Download Capture
bs: Snimanje preuzimanja

en: Download File
bs: Preuzmi fajl

en: Download config
bs: Preuzmi konfiguraciju

en: Download configuration as XML
bs: Preuzmi konfiguraciju kao XML

en: Download file failed with status code %1$s. URL: %2$s
bs: Preuzimanje fajla nije uspjelo sa status kodom %1$s. URL: %2$s

en: Download speed must be between 1 and 999999
bs: Brzina preuzimanja mora biti između 1 i 999999

en: Download speed needs to be an integer
bs: Brzina downloada mora biti cijeli broj

en: Drop SYN-FIN packets (breaks RFC1379, but nobody uses it anyway)
bs: Baci SYN-FIN pakete (razbija RFC1379,, ali niko ga ne koristi svakako)

en: Drop packets to closed TCP ports without returning a RST
bs: Baci pakete za zatvorene TCP portove bez vraćanja RST

en: Drops
bs: Bacanja

en: Dry Run
bs: Dry run

en: Dry-run only.%1$sNo files copied.
bs: Dry-run samo. %1$sNijedan fajl nije kopiran.

en: Duplicate Connection
bs: Dupliraj konekciju

en: Dutch
bs: Belgijski

en: DynDNS updated IP Address (A) for %1$s on %2$s (%3$s) to %4$s
bs: DynDNS ažurirana IP adresa (A) za %1$s na %2$s (%3$s) za %4$s

en: DynDNS updated IP Address on %1$s (%2$s) to %3$s
bs: DynDNS ažurirao IP adresu na %1$s (%2$s) to %3$s

en: DynDNS updated IPv6 Address (AAAA) for %1$s on %2$s (%3$s) to %4$s
bs: DynDNS ažurirana IPv6 adresa (AAAA) za %1$s na %2$s (%3$s) za %4$s

en: DynDNS updated IPv6 Address on %1$s (%2$s) to %3$s
bs: DynDNS ažurirao IPv6 adresu na %1$s (%2$s) na %3$s

en: Dynamic DNS
bs: Dinamički DNS

en: Dynamic DNS %1$s (%2$s): %3$s extracted from %4$s
bs: Dinamički DNS %1$s (%2$s): %3$s raspakovan iz %4$s

en: Dynamic DNS %1$s (%2$s): %3$s extracted from local system.
bs: Dinamički DNS %1$s (%2$s): %3$s raspakovan sa lokalnog systema.

en: Dynamic DNS %1$s (%2$s): IP address could not be extracted from %3$s
bs: Dinamički DNS %1$s (%2$s): IP adresa ne može biti raspakovana iz %3$s

en: Dynamic DNS %1$s (%2$s): Processing dummy update on No-IP free account. IP temporarily set to %3$s
bs: Dinamički DNS %1$s (%2$s): Procesiram vještačko ažuriranje na No-IP besplatnom akauntu. IP trenutno postavljen na %3$s

en: Dynamic DNS %1$s (%2$s): _checkIP() starting.
bs: Dinamički DNS %1$s (%2$s): _checkIP() započet.

en: Dynamic DNS %1$s (%2$s): _checkLookupStatus() ending.  No matching records found.
bs: Dinamički DNS %1$s (%2$s): _checkLookupStatus() se završava. Nijedan podatak koji se poklapa nije pronađen.

en: Dynamic DNS %1$s (%2$s): _checkLookupStatus() starting.
bs: Dinamički DNS %1$s (%2$s): _checkLookupStatus() se starta.

en: Dynamic DNS %1$s (%2$s): _checkStatus() starting.
bs: Dinamički DNS %1$s (%2$s): _checkStatus() započet.

en: Dynamic DNS %1$s (%2$s): _detectChange() starting.
bs: Dinamički DNS %1$s (%2$s): _detectChange() starta.

en: Dynamic DNS %1$s (%2$s): _listCurrent() starting.
bs: Dinamički DNS %1$s (%2$s): _listCurrent() se starta.

en: Dynamic DNS %1$s (%2$s): _remove() starting.
bs: Dinamički DNS %1$s (%2$s): _remove() se starta.

en: Dynamic DNS %1$s (%2$s): _update() starting.
bs: Dinamički DNS %1$s (%2$s): _update() započet.

en: Dynamic DNS %1$s debug information (%2$s): Could not resolve %3$s to IP using interface IP %4$s.
bs: Dinamički DNS %1$s debug informacije (%2$s): Nemoguće prebaciti %3$s na IP koristeći interfejs IP %4$s.

en: Dynamic DNS (%1$s) There was an error trying to determine the public IP for interface - %2$s (%3$s %4$s).
bs: Dinamički DNS (%1$s) Greška pri određivanju javne IP adrese za interface - %2$s (%3$s %4$s).

en: Dynamic DNS (%1$s): running get_failover_interface for %2$s. found %3$s
bs: Dinamički DNS (%1$s): pokrenut get_failover_interface za %2$s. Pronađen %3$s

en: Dynamic DNS Client
bs: Dinamički DNS klijent

en: Dynamic DNS Clients
bs: Dinamički DNS klijenti

en: Dynamic DNS Status
bs: Status dinamičkog DNSa

en: Dynamic DNS access has been blocked!
bs: Dinamički DNS pristup je blokiran!

en: Dynamic DNS client configured.
bs: Dinamički DNS klijent konfigurisan.

en: Dynamic DNS client deleted.
bs: Dinamički DNS klijent obrisan.

en: Dynamic DNS client disabled.
bs: Dinamički DNS klijent isključen

en: Dynamic DNS client enabled.
bs: Dinamički DNS klijent uključen

en: Dynamic DNS domain key name which will be used to register client names in the DNS server.
bs: Dinamički ključ DNS domen imena koji će biti korišten za registraciju klijent imena u DNS serveru.

en: Dynamic DNS domain key secret (HMAC-MD5) which will be used to register client names in the DNS server.
bs: Tajni ključ dinamičke DNS domene (HMAC-MD5) koji će biti korišten za registraciju klijent imena u DNS serveru.

en: Dynamic DNS: updatedns() starting
bs: Dinamički DNS: updatedns() počinje

en: Dynamic Dns (%1$s): Current WAN IP: %2$s
bs: Dinamički DNS (%1$s): Trenutni WAN IP: %2$s

en: Dynamic Dns (%s): Current WAN IP could not be determined, skipping update process.
bs: Dinamički DNS (%s): Trenutni WAN IP nije mogao biti određen, preskačemo proces ažuriranja.

en: Dynamic Dns: More than %s days. Updating.
bs: Dinamički DNS: Više od %s dana. Ažuriram.

en: Dynamic Dns: cacheIP != wan_ip. Updating.
bs: Dinamički DNS: cacheIP != wan_ip. Ažuriram.

en: Dynamic IP
bs: Dinamički IP

en: Dynamic View
bs: Dinamički pregled

en: Dynamic gateway values cannot be specified for interfaces with a static IPv4 configuration.
bs: Dinamičke gateway vrijednosti ne mogu biti specificirane za interface sa statičkom IPv4 konfiguracijom.

en: Dynamic gateway values cannot be specified for interfaces with a static IPv6 configuration.
bs: Dinamičke gateway vrijednosti ne mogu biti specificirane za interface sa statičkom IPv6 konfiguracijom.

en: EAP-MSChapv2 can only be used with IKEv2 type VPNs.
bs: EAP-MSChapv2 može biti korišten samo sa IKEv2 tipom VPNova.

en: EAP-RADIUS can only be used with IKEv2 type VPNs.
bs: EAP-RADIUS može biti korišten samo sa IKEv2 tipom VPNova.

en: EAP-TLS can only be used with IKEv2 type VPNs.
bs: EAP-TLS može biti korišten samo sa IKEv2 tipom VPNova.

en: ECDH Curve
bs: ECDH krivulja

en: ECN friendly behavior
bs: ECN prijateljsko ponašanje

en: ECN friendly behavior violates RFC2893. This should be used in mutual agreement with the peer.
bs: ECN prijateljsko ponašanje krši RFC2893. Ovo bi trebalo biti korišteno u zajedničkom dogovoru sa peerom.

en: EDNS Buffer Size
bs: EDNS veličina buffera

en: ERR Could not install configuration.
bs: ERR nemoguće instalirati konfiguraciju

en: ERR Could not save configuration.
bs: ERR nemougće spasiti konfiguraciju

en: ERR Invalid configuration received.
bs: ERR pogrešna konfiguracija data

en: ERROR!
bs: GREŠKA

en: ERROR!  Could not connect to server %s.
bs: GREŠKA!  Neuspješno konektovanje na server %s.

en: ERROR!  Could not convert m0n0wall -> pfsense in config.xml
bs: GREŠKA! Nije moguće pretvoriti m0n0wall -> pfsense u config.xml

en: ERROR!  ldap_get_user_ous() backed selected with no LDAP authentication server defined.
bs: GREŠKA! ldap_get_user_ous() izabran bez LDAP ovjere servera.

en: ERROR! Could not bind to server %s.
bs: ERROR! Nemoguća dodjela serveru %s.

en: ERROR! Could not login to server %1$s as user %2$s: %3$s
bs: GREŠKA! Nemoguće prijavljivanje na server %1$s kao korisnik %2$s: %3$s

en: ERROR! Either LDAP search failed, or multiple users were found.
bs: GREŠKA! Ili LDAP pretraga nije bila uspješna, ili je pronađeno više korisnika.

en: ERROR! ldap_backed() called with no LDAP authentication server defined.
bs: GREŠKA! ldap_backed() je pozvan bez LDAP server autentikacije.

en: ERROR! ldap_backed() called with no LDAP authentication server defined.  Defaulting to local user database. Visit System -> User Manager.
bs: GREŠKA! ldap_backed() je pozvan bez LDAP autentikacije. Vraćanje na zadanu lokalnu korisničku bazu podataka. Posjeti System -> User Manager.

en: ERROR! ldap_backed() could not STARTTLS to server %s.
bs: GREŠKA! ldap_backed() ne može STARTTLS za server %s.

en: ERROR! ldap_get_groups() Could not connect to server %s.
bs: GREŠKA! ldap_get_groups() Nije moguće spajanje na server %s.

en: ERROR! ldap_get_groups() could not STARTTLS to server %s.
bs: GREŠKA! ldap_get_groups() ne može pokrenuti STARTTLS za server %s.

en: ERROR! ldap_get_groups() could not bind anonymously to server %s.
bs: GREŠKA! ldap_get_groups() , nemogućnost anonimne dodjele serveru %s.

en: ERROR! ldap_get_groups() could not bind to server %s.
bs: GREŠKA! ldap_get_groups() nije moguće dodijeliti serveru %s.

en: ERROR! ldap_get_user_ous() could not STARTTLS to server %s.
bs: GREŠKA! ldap_test_ous() ne može pokrenuti STARTTLS za server %s.

en: ERROR! ldap_get_user_ous() could not bind anonymously to server %s.
bs: GREŠKA! ldap_get_user_ous() , nemogućnost anonimne dodjele serveru %s.

en: ERROR! ldap_get_user_ous() could not bind to server %s.
bs: GREŠKA! ldap_get_user_ous() nije moguće dodijeliti serveru %s.

en: ERROR! ldap_test_bind() could not STARTTLS to server %s.
bs: GREŠKA! ldap_test_bind() ne može pokrenuti STARTTLS za server %s.

en: ERROR!!! An error occurred on pkg execution (rc = %d) with parameters '%s':
bs: GREŠKA!!! Uočena je greška na pkg izvršavanju (rc = %d) sa parametrima '%s'.

en: ERROR: Error trying to get package version. Aborting...
bs: GREŠKA: Greška uočena pri očitavanju verzije paketa. Obustavljam...

en: ERROR: Error trying to get packages list. Aborting...
bs: GREŠKA: Greška uočena pri dobijanju liste paketa. Obustavljam...

en: ESP is encryption, AH is authentication only.
bs: ESP je enkripcija, AH je samo autentikacija

en: Each configured DNS server must have a unique IP address. Remove the duplicated IP.
bs: Svaki konfigurisan DNS server mora imati jedinstvenu IP adresu. Uklonite duplirani IP.

en: Each firewall sends these messages out via multicast on a specified interface, using the PFSYNC protocol (IP Protocol 240). It also listens on that interface for similar messages from other firewalls, and imports them into the local state table.%1$sThis setting should be enabled on all members of a failover group.%1$sClicking "Save" will force a configuration sync if it is enabled! (see Configuration Synchronization Settings below)
bs: Svaki firewall šalje ove poruke putem multicast-a specificiranom interfejsu, koristeći PFSYNC protokol (IP protokol 240). Također prati promet na tom interfejsu za slične poruke drugih firewalla i uvozi ih u lokalnu tablicu stanja. %1$sOva postavka bi trebala biti uključena na svim korisnicima failover grupe.%1$sKlikom na dugme "Spasi" forsirate sinhronizaciju konfiguracije ako je uključena! (pogledajte postavke sinhronizacije konfiguracije ispod)

en: Each interface in a column
bs: Svaki interfejs u koloni

en: Each interface in a row
bs: Svaki interfejs u redu

en: Each level shows all info from the previous levels. Level 3 is recommended for a good summary of what's happening without being swamped by output.%1$s%1$sNone: Only fatal errors%1$sDefault through 4: Normal usage range%1$s5: Output R and W characters to the console for each packet read and write. Uppercase is used for TCP/UDP packets and lowercase is used for TUN/TAP packets.%1$s6-11: Debug info range
bs: Svaki nivo prikazuje sve informacije sa prethodnih nivoa. Nivo 3 je preporučen za dobar pregled svega što se dešava sa pravim izlazom. %1$s%1$sNone: Samo fatalne greške%1$sZadano kroz 4: Normalan domet korištenja%1$s5: Ispiši R i W karaktere na konzolu za svako paketno čitanje i pisanje. Velika slova se koriste za TCP/UDP pakete a mala za TUN/TAP pakete. %1$s6-11: Domet debagiranja informacija

en: Each voucher must be good for at least 1 minute.
bs: Svaki vaučer mora biti validan barem 1 minutu.

en: Easy Rule
bs: Easy pravilo

en: Easy Rule: Add to Block List
bs: Easy pravilo: Dodaj na blok listu

en: Easy Rule: Blocked from Firewall Log View
bs: Lagano pravilo: Blokiran sa firewall log pregleda

en: Easy Rule: Pass this traffic
bs: Easy pravilo: Zaobiđi ovaj promet

en: Easy Rule: Passed from Firewall Log View
bs: Lagano pravilo: proslijeđeno sa firewall log pregleda

en: Echo reply
bs: Echo odgovor

en: Echo request
bs: Echo zahtjev

en: Edge Ports
bs: Edge portovi

en: Edge interface (%s) is not part of the bridge. Remove the edge interface to continue.
bs: Edge interface (%s) nije dio bridgea. Uklonite edge interface za nastavak.

en: Edit
bs: Modifikuj

en: Edit ACL
bs: Modifikuj ACL

en: Edit Advanced Outbound NAT Entry
bs: Modifikuj napredni vanopsežni NAT unos

en: Edit CA
bs: Modifikuj CA

en: Edit CRL
bs: Modifikuj CRL

en: Edit CSC Override
bs: Modifikuj CSC override

en: Edit Captive Portal IP Rule
bs: Modifikuj IP pravilo zabranjenog portala

en: Edit Device
bs: Modifikuj uređaj

en: Edit Domain Override
bs: Modifikuj override domene

en: Edit File
bs: Modifikuj fajl

en: Edit Firewall Rule
bs: Modifikuj Firewall Pravilo

en: Edit GIF interface
bs: Modifikuj GIF interface

en: Edit GRE interface
bs: Modifikuj GRE interface

en: Edit Gateway
bs: Modifikuj gejtvej

en: Edit Gateway Group Entry
bs: Modifikuj unos gateway grupe

en: Edit Host Override
bs: Modifikuj override hosta

en: Edit IGMP entry
bs: Modifikuj IGMP unos

en: Edit IP
bs: Modifikuj IP

en: Edit Imported Certificate Revocation List
bs: Modifikuj uvezenu listu ukinutih certifikata

en: Edit LAGG interface
bs: Modifikuj LAGG interface

en: Edit Load Balancer - Monitor Entry
bs: Modifikuj balanser učitanih podataka - Unos monitora

en: Edit Load Balancer - Virtual Server Entry
bs: Modifikuj balanser učitanih podataka - Unos virtualnog servera

en: Edit MAC Address Rules
bs: Modifikuj pravila MAC adresa

en: Edit MAC address
bs: Modifikuj MAC adresu

en: Edit NAT 1:1 Entry
bs: Modifikuj NAT 1:1 unos

en: Edit NAT NPt Entry
bs: Modifikuj NAT NPt unos

en: Edit PPP interface
bs: Modifikuj PPP interface

en: Edit PPPoE instance
bs: Modifikuj PPPoE instancu

en: Edit Phase 1
bs: Modifikuj Phase 1

en: Edit Phase 2
bs: Modifikuj Phase 2

en: Edit Pre-Shared-Secret
bs: Modifikuj Ranije-Dijeljenu Tajnu

en: Edit Q-in-Q interface
bs: Modifikuj Q-in-Q interface

en: Edit Redirect Entry
bs: Modifikuj unos redirekcije

en: Edit Route Entry
bs: Modifikuj unos rute

en: Edit Static Mapping
bs: Modifikuj statično mapiranje

en: Edit Tunable
bs: Modifikuj opciju za štimanje

en: Edit VLAN
bs: Modifikuj VLAN

en: Edit Virtual IP
bs: Modifikuj virtualni IP

en: Edit WOL Entry
bs: Modifikuj WOL unos

en: Edit WiFi interface
bs: Modifikuj WiFi interface

en: Edit alias
bs: Modifikuj alias

en: Edit client
bs: Modifikuj klijenta

en: Edit domain override
bs: Modifikuj override domene

en: Edit gateway
bs: Modifikuj gejtvej

en: Edit gateway group
bs: Modifikuj gateway grupu.

en: Edit group
bs: Modifikuj grupu

en: Edit host override
bs: Modifikuj host override

en: Edit hostname
bs: Modifikuj hostname

en: Edit interface bridge
bs: Unesi bridge interfacea

en: Edit key
bs: Modifikuj ključ

en: Edit mapping
bs: Modifikuj mapiranje

en: Edit monitor
bs: Modifikuj monitor

en: Edit phase1 entry
bs: Modifikuj phase1 unos

en: Edit phase2 entry
bs: Modifikuj phase2  unos

en: Edit pool
bs: Modifikuj pool

en: Edit route
bs: Modifikuj rutu

en: Edit rule
bs: Modifikuj pravilo

en: Edit schedule
bs: Modifikuj raspored

en: Edit server
bs: Modifikuj server

en: Edit service
bs: Modifikuj servis

en: Edit static mapping
bs: Modifikuj statičko mapiranje

en: Edit this item
bs: Modifikuj ovu stavku

en: Edit tunable
bs: Modifikuj opciju za štimanje

en: Edit user
bs: Modifikuj korisnika

en: Edit virtual ip
bs: Modifikuj virtualni ip

en: Edit virtual server
bs: Modifikuj virtualni server

en: Edit voucher roll
bs: Modifikuj voucher roll

en: Edit zone
bs: Modifikuj zonu

en: Edited IPsec Pre-Shared Keys
bs: Modifikovani IPsec Ranije-Dijeljeni Ključevi

en: Edited a firewall alias.
bs: Modifikovan firewall alias

en: Editing pool-specific options. To return to the Interface, click its tab above.
bs: Editujem pool-specifične opcije. Da se vratite na interface, kliknite na tab iznad.

en: Effective Privileges
bs: Efektivne privilegije

en: Either MAC address or Client identifier must be specified
bs: Ili MAC adresa ili klijent identifikator moraju biti specificirani

en: Embedded platform users: Please be patient, the wizard takes a little longer to run than the normal GUI.
bs: Ugrađeni korisnici platforme: Molimo budite strpljivi, čarobnjak koristi više vremena za pokretanje nego standardni GUI.

en: Empty Table
bs: Prazna tablica

en: Empty destination port alias '%1$s' for rule '%2$s'
bs: Prazan destinacijski port alias '%1$s' za pravilo '%2$s'

en: Empty source port alias '%1$s' for rule '%2$s'
bs: Prazan izvorni port alias '%1$s' za pravilo '%2$s'

en: Enable
bs: Uključi

en: Enable (NAT + Proxy)
bs: Uključi (NAT + Proxy)

en: Enable (Pure NAT)
bs: Uključi (Pure NAT)

en: Enable 802.1X authentication
bs: Uključi 802.1X autentikaciju

en: Enable CARP
bs: Uključi CARP

en: Enable Captive Portal
bs: Uključi sigurnosni portal

en: Enable Cisco Extensions
bs: Uključi cisco ekstenzije

en: Enable Compression (stub) [compress]
bs: Uključi Kompresiju (stub) [compress]

en: Enable DHCP relay on interface
bs: Uključi DHCP relej na interfejsu

en: Enable DHCP server on %s interface
bs: Uključi DHCP server na %s interfaceu

en: Enable DHCPv6 relay on interface
bs: Uključi DHCPv6 relej na interfejsu

en: Enable DHCPv6 server on interface
bs: Uključi DHCPv6 server na interfejsu

en: Enable DNS forwarder
bs: Uključi DNS prosljeđivač

en: Enable DNS resolver
bs: Uključi DNS resolver

en: Enable DNSSEC Support
bs: Uključi DNSSEC podršku

en: Enable DPD
bs: Uključi DPD

en: Enable Dial-On-Demand mode
bs: Uključi Dial-on-demand način

en: Enable Dial-on-Demand mode.
bs: Uključi dial-on-demand način

en: Enable Forwarding Mode
bs: Uključi način prosljeđivanja

en: Enable HTTPS login
bs: Uključi HTTPS prijavu

en: Enable IPCompression
bs: Uključi IPKompresiju

en: Enable IPsec Mobile Client Support
bs: Uključi IPsec podršku za mobilne klijente

en: Enable IPv6 auto linklocal
bs: Omogući IPv6 auto linklocal

en: Enable IPv6 over IPv4 tunneling
bs: Uključi tuneliranje IPv6 preko IPv4

en: Enable KOD packets.
bs: Uključi KOD pakete.

en: Enable L2TP
bs: Uključi L2TP

en: Enable L2TP server
bs: Uključi L2TP server

en: Enable MSS clamping on TCP flows over VPN. This helps overcome problems with PMTUD on IPsec VPN links. If left blank, the default value is 1400 bytes.
bs: Uključi MSS spajanje na TCP tokovima preko VPNa. Ovo pomaže u prevazilaženju problema sa PMTUD na IPsec VPN linkovima. Ako je ostavljeno prazno, zadana vrijednost je 1400 bajta.

en: Enable MSS clamping on VPN traffic
bs: Uključi MSS klampovanje na VPN promet

en: Enable Maximum MSS
bs: Uključi maksimum MSS

en: Enable NAT Reflection for 1:1 NAT
bs: Uključi NAT reflekciju za 1:1 NAT

en: Enable NCP
bs: Uključi NCP

en: Enable Negotiable Cryptographic Parameters
bs: Uključi svojevoljne kriptografske parametre

en: Enable NetBIOS over TCP/IP
bs: Uključi NetBIOS preko TCP/IP

en: Enable Network Booting
bs: Uključi mrežno bootanje

en: Enable PPPoE Server
bs: Uključi PPPoE server

en: Enable PPS signal processing (default: checked).
bs: Uključi PPS procesiranje signala (zadano: odabrano).

en: Enable Pass-through MAC automatic addition with username
bs: Uključi Pass-through MAC automatski dodatak sa korisničkim imenom

en: Enable Pass-through MAC automatic additions
bs: Uključi Pass-through MAC automatske dodatke

en: Enable PowerD
bs: Uključi PowerD

en: Enable Proxy
bs: Uključi Proxy

en: Enable RADIUS MAC authentication
bs: Uključi RADIUS MAC autentikaciju

en: Enable RADIUS accounting
bs: Uključi RADIUS računanje

en: Enable RRD graphs of NTP statistics (default: disabled).
bs: Uključi RRD grafove NTP statistike (zadano: isključeno).

en: Enable RRD statistics graphs
bs: Uključi RRD statistiku grafoav

en: Enable RSTP/STP
bs: Uključi RSTP/STP

en: Enable Remote Logging
bs: Uključi udaljeno logovanje

en: Enable SMTP over SSL/TLS
bs: Uključi SMTP preko SSL/TLS

en: Enable SSL/TLS
bs: Uključi SSL/TLS

en: Enable Secure Shell
bs: Uključi sigurni shell

en: Enable Spanning Tree Protocol on interface. The if_bridge(4) driver has support for the IEEE 802.1D Spanning Tree Protocol (STP). STP is used to detect and remove loops in a network topology.
bs: Uključi protokol razapinjujućeg stabla na interfaceu. if_bridge(4) driver ima podršku za IEEE 802.1D protokol razapinjujućeg stabla (STP). STP se koristi za detektovanje i uklanjanje petlji u mrežnoj topologiji.

en: Enable Static ARP entries
bs: Uključi statične ARP unose

en: Enable Unity Plugin
bs: Uključi unity plugin

en: Enable Unity Plugin which provides Cisco Extension support such as Split-Include, Split-Exclude and Split-Dns.
bs: Uključi Unity Plugin koji omogućava podršku za Cisco ekstenzije kao Split-Include, Split-Exclude i Split-DNS

en: Enable WME
bs: Uključi WME

en: Enable WPA
bs: Uključi WPA

en: Enable Wildcard
bs: Uključi WildCard

en: Enable automatic outbound NAT for Reflection
bs: Uključi automatski vanopsežni NAT za reflekciju

en: Enable bypass for LAN interface IP
bs: Uključi bypass za LAN interfejs IP

en: Enable client
bs: Uključi klijenta

en: Enable default gateway switching
bs: Uključi zadano mijenjanje gejtveja

en: Enable extended GPS status if GPGSV or GPGGA are explicitly enabled by GPS initialization commands.
bs: Uključite produženi GPS status ako GPGSV ili GPGGA su eksplicitno uključeni od strane GPS inicijalizatorskih komandi

en: Enable extended query
bs: Uključi prošireni upit

en: Enable falling edge PPS signal processing (default: unchecked, rising edge).
bs: Uključi falling edge PPS procesiranje signala (zadano: nije odabrano već rising edge)

en: Enable flowtable support
bs: Uključite flowtable podršku

en: Enable gateway
bs: Uključi gejtvej

en: Enable interface
bs: Uključi interfejs

en: Enable kernel PPS clock discipline (default: checked).
bs: Uključi kernel PPS disciplinu sata (zadano: odabrano).

en: Enable kernel PPS clock discipline (default: unchecked).
bs: Uključi kernel PPS satnu disciplinu (zadano: nije odabrano).

en: Enable limiter and its children
bs: Uključi limiter i njegovu djecu

en: Enable logout popup window
bs: Uključi popup prozor pri odjavi

en: Enable per-user bandwidth restriction
bs: Uključi restrikciju propusnosti po korisniku

en: Enable persistent logging of connection uptime.
bs: Uključi perzistentno logovanje pokrenute konekcije.

en: Enable promiscuous mode
bs: Uključi slobodni način

en: Enable registration of DHCP client names in DNS
bs: Uključi prijave DHCP klijent imena u DNSu

en: Enable registration of DHCP client names in DNS.
bs: Uključi registraciju DHCP klijent imena u DNSu.

en: Enable repository/branch sync before reboot
bs: Uključi sinhronizaciju repozitorija/grane prije ponovnog pokretanja

en: Enable route
bs: Uključi rutu

en: Enable service
bs: Uključi servis

en: Enable strict Certificate Revocation List checking
bs: Uključi striktnu provjeru liste ukinuća

en: Enable strict interface binding
bs: Uključi striktnu dodjelu interfejsa

en: Enable strongSwan's interfaces_use option to bind specific interfaces only. This option is known to break IPsec with dynamic IP interfaces. This is not recommended at this time.
bs: Uključuje strongSwan-ove interfaces_use opciju za dodjelu specifičnih interfejsa. Ova opcija je poznata da razbija IPsec sa dinamičkim IP interfejsima. Ovo nije preporučeno u ovom trenutku.

en: Enable the SNMP Daemon and its controls
bs: Uključi SNMP Daemon i njegova kontrola

en: Enable the SNMP Trap and its controls
bs: Uključi SNMP Trap i njegovu kontrolu

en: Enable the creation, generation and activation of rolls with vouchers
bs: Uključi stvaranje, generisanje i aktivaciju rollova sa vaučerima

en: Enable this option to never initiate this connection from this side, only respond to incoming requests.
bs: Uključi ovu opciju da nikad ne inicirate konekciju sa ove strane, samo odgovaranjem na dolazeće zahtjeve.

en: Enable this option to not send Netgate Device ID to pfSense as part of User-Agent header.
bs: Omogućite ovu opciju da ne šaljete Netgate Uređaj ID pfSense-u kao dio User-Agent headera.

en: Enable this queue
bs: Uključi ovaj red

en: Enable this to add DHCP leases statistics to the RRD graphs. Disabled by default.
bs: Uključite ovo za dodavanje statistike DHCP posudbe za RRD grafove. Zadano je ovo isključeno

en: Enable this to split connection entries with multiple phase 2 configurations. Required for remote endpoints that support only a single traffic selector per child SA.
bs: Uključi ovu opciju za razdvajanje unosa konekcije sa višestrukim phase 2 konfiguracijama. Potrebno za udaljene krajnje tačke koje podržavaju jedan selektor prometa po djetetu SA.

en: Enable verbose logging
bs: Uključi verbose logovanje

en: Enable verbose logging (Default is terse logging)
bs: Uključi verbalno logiranje (zadano je sažeto logiranje)

en: Enable waiting period reset on attempted access
bs: Uključi period čekanja resetovan na pokušanom pristupu

en: Enable webConfigurator login autocomplete
bs: Uključi automatsko popunjavanje webConfigurator prijave

en: Enable/Disable
bs: Uključi/Isključi

en: Enable/disable discipline and its children
bs: Uključi/isključi disciplinu i njenu djecu

en: Enabled
bs: Uključeno

en: Enabled (Default)
bs: Uključeno (zadano)

en: Enabled a check IP service.
bs: Uključen IP servis za provjeru

en: Enabled the default check IP service.
bs: Uključen zadani IP servis za provjeru

en: Enables infrastructure for caching flows as a means of accelerating L3 and L2 lookups as well as providing stateful load balancing when used with RADIX_MPATH.
bs: Uključuje infrastrukturu za kešing tokove kao načine ubrzavanja L3 i L2 traženja kao i pružanje balansiranja učitanih podataka kad se koristi sa RADIX_MPATH

en: Enables network booting
bs: Uključuje mrežno bootanje

en: Enables the first serial port with 115200/8/N/1 by default, or another speed selectable below.
bs: Uključuje prvi serijski port sa 115200/8/N/1 po zadanom, ili drugu brzinu koju je moguće odabrati ispod.

en: Enabling name resolution may cause the query to take longer. It can be stopped at any time by clicking the Stop button in the browser.
bs: Uključivanje rezolucije imena može uzrokovati da upit traje duže. Može biti obustavljen u bilo kojem trenutku klikanjem na Stop dugme u pretraživaču.

en: Enabling system routing
bs: Uključivanje system routinga.

en: Enabling this option will disable NAT for traffic matching this rule and stop processing Outbound NAT rules
bs: Uključivanje ove opcije će isključiti NAT za promet koji se poklapa sa ovim pravilom i zaustaviti procesiranje vanopsežnih NAT pravila

en: Enabling this will rapidly fill the log, but is useful for tuning Fudge time 2.
bs: Uključivanje ove opcije će rapidno popuniti log, ali je korisno za štimanje Fudge vremena 2.

en: Enabling voucher support...
bs: Uključujem vaučer podršku...

en: Encrypt this configuration file.
bs: Enkriptuj ovaj konfiguracijski fajl.

en: Encrypted private keys are not yet supported.
bs: Enkriptovani privatni ključevi još uvijek nisu podržani.

en: Encryption
bs: Enkripcija

en: Encryption Algorithm AES-GCM can only be used with IKEv2
bs: Enkripcijski algoritam AES-GCM može biti korišten samo sa IKEv2

en: End
bs: Kraj

en: Ended Configuration upgrade at %s
bs: Završeno konfiguracijsko ažuriranje na %s

en: Enforce match
bs: Forsiraj poklapanje

en: English
bs: Engleski

en: Enter CARP maintenance mode
bs: Uđi u CARP mod održavanja

en: Enter IP addresses to be used by the system for DNS resolution.
bs: Unesite IP adrese koje će sistem koristiti za DNS rezoluciju.

en: Enter Leap second configuration as text OR select a file to upload.
bs: Unesite prestupnu sekundu kao tekst ILI odaberite fajl za slanje.

en: Enter Persistent CARP Maintenance Mode
bs: Uđi u perzistentni CARP način održavanja

en: Enter Voucher Code:
bs: Unesite vaučer kod:

en: Enter a CIDR block of proxy ARP addresses.
bs: Unesi CIDR blok proxy ARP adresa.

en: Enter a DUID in the following format: %1$s %2$s
bs: Unesite DUID u sljedećem formatu: %1$s %2$s

en: Enter a MAC address in the following format: xx:xx:xx:xx:xx:xx
bs: Unesite MAC adresu u ovom formatu: xx:xx:xx:xx:xx:xx

en: Enter a custom port number for the webConfigurator above to override the default (80 for HTTP, 443 for HTTPS). Changes will take effect immediately after save.
bs: Unesite svojstveni port broj za webConfigurator iznad da bi overrideali zadano (80 za HTTP, 443 za HTTPS). Promjene će imati efekta odmah nakon spašavanja.

en: Enter a decimal number to be used as the serial number for the next certificate to be created using this CA.
bs: Unesite decimalni broj koji će se koristiti kao serijski broj sljedećeg certifikata koji će biti kreiran koristeći ovaj CA.

en: Enter a description (name) for the interface here.
bs: Unesite opis (ime) za interface ovdje.

en: Enter a description here for reference only (Not parsed).
bs: Unesi opis zbog reference (Nije proslijeđeno).

en: Enter a description here for reference only. (Not parsed)
bs: Unesi opis ovdje radi reference. (nije proslijeđen)

en: Enter a description, Save, then drag to final location.
bs: Unesi opis, spasi, zatim povuci do željene lokacije

en: Enter a download limit to be enforced on this Hostname in Kbit/s
bs: Unesite download limit koji će biti za ovaj hostname u Kbit/s.

en: Enter a download limit to be enforced on this MAC in Kbit/s
bs: Unesite limit preuzimanja koji će se forsirati na ovom MACu u Kbit/s

en: Enter a download limit to be enforced on this address in Kbit/s
bs: Unesite limit preuzimanja da se forsira za ovu adresu u Kbit/s

en: Enter a name for the Growl notifications.
bs: Unesite ime za Growl notifikacije.

en: Enter a search string or *nix regular expression to search package names and descriptions.
bs: Unesi string za pretragu ili *nix regularan izraz za pretraživanje paketnih imena i opisa

en: Enter a single URL containing a large number of IPs and/or Subnets. After saving, the URLs will be downloaded and a table file containing these addresses will be created. This will work with large numbers of addresses (30,000+) or small numbers.
bs: Unesite URL koji sadrži velik broj IPova i/ili subnetova. Nakon spašavanja URLovi će biti preuzeti i fajl sa tablicom koji sadrži te adrese će biti kreiran. Ovo će funkcionisati za velike brojeve adresa (30,000+) ili pak za manje brojeve.

en: Enter a single URL containing a list of Port numbers and/or Port ranges. After saving, the URL will be downloaded.
bs: Unesite URL koji sadrži velik broj Portova i/ili Port intervala. Nakon spašavanja URL će biti preuzet.

en: Enter a upload limit to be enforced on this Hostname in Kbit/s
bs: Unesite upload limit koji će biti za ovaj hostname u Kbit/s

en: Enter additional identifiers for the certificate in this list. The Common Name field is automatically added to the certificate as an Alternative Name. The signing CA may ignore or change these values.
bs: Upiši dodane identifikatore za certifikat na listu. Polje uobičajeno ime  je automatski dodano na certifikat kao dodatno ime. Potpisujući CA može ignorisati ili promjeniti ove vrijednosti.

en: Enter an alternative address here to be used to monitor the link. This is used for the quality RRD graphs as well as the load balancer entries. Use this if the gateway does not respond to ICMP echo requests (pings).
bs: Unesite alternativnu adresu ovdje koja će biti korištena za praćenje veze. Ovo se koristi za kvalitet RRD grafova kao i balanser prometa. Koristite ovo ako gejtvej ne reaguje na ICMP echo zahtjeve (pingove).

en: Enter an upload limit to be enforced on this MAC in Kbit/s
bs: Unesite upload limit koji će se forsirati na ovom MACu u Kbit/s

en: Enter an upload limit to be enforced on this address in Kbit/s
bs: Unesite upload limit da se forsira za ovu adresu u Kbit/s

en: Enter any additional configuration parameters to add to the DNS Resolver configuration here, separated by a newline.
bs: Unesite bilo koje dodatne parametre konfiguracije da bi ih dodali na DNS resolver konfiguraciju ovdje, razdvojene novim redom.

en: Enter any additional options to add for this client specific override, separated by a semicolon. %1$sEXAMPLE: push "route 10.0.0.0 255.255.255.0";
bs: Unesite neke dodatne opcije za ovaj klijentno specifični override, razdvojeni zarezom. %1$sNA PRIMJER: push "route 10.0.0.0 255.255.255.0";

en: Enter any additional options to add to the OpenVPN client configuration here, separated by semicolon.
bs: Unesite bilo koju dodatnu opciju za dodavanje OpenVPN klijentske konfiguracije ovdje, razdvojene tačka zarezom.

en: Enter any additional options to add to the OpenVPN server configuration here, separated by semicolon.%1$sEXAMPLE: push "route 10.0.0.0 255.255.255.0"
bs: Unesite bilo koje dodatne opcije za dodavanje OpenVPN server konfiguraciji, razdvojene zarezom. %1$sPRIMJER: push "route 10.0.0.0 255.255.255.0"

en: Enter any additional options to add to the dnsmasq configuration here, separated by a space or newline.
bs: Unesite bilo kakve dodatne opcije za dodavanje konfiguracije dnsmasq-a ovdje, odvojene razmakom ili novim redom.

en: Enter as many URLs as desired. After saving, the URLs will be downloaded and the items imported into the alias. Use only with small sets of IP addresses (less than 3000).
bs: Unesite koliko želite URLova. Nakon spašavanja, URLovi će biti preuzeti i itemi će biti uneseni u alias. Koristite samo male setove IP adresa (manje od 3000).

en: Enter as many URLs as desired. After saving, the URLs will be downloaded and the items imported into the alias. Use only with small sets of Ports (less than 3000).
bs: Unesite koliko želite URLova. Nakon spašavanja, URLovi će biti preuzeti i itemi će biti uneseni u alias. Koristite samo male setove portova (manje od 3000).

en: Enter as many hosts as desired. Hosts must be specified by their IP address or fully qualified domain name (FQDN). FQDN hostnames are periodically re-resolved and updated. If multiple IPs are returned by a DNS query, all are used. An IP range such as 192.168.1.1-192.168.1.10 or a small subnet such as 192.168.1.16/28 may also be entered and a list of individual IP addresses will be generated.
bs: Unesite onoliko hostova koliko želite i oni moraju biti specificirani svojom IP adreom ili kvalifikovanim domain imenom (FQDN). FQDN host imena su periodički ažurirana. Ako je vraćeno više IP adresa od strane DNS upita, sve će se koristiti. IP interval poput 192.168.1.1-192.168.1.10 ili mali subnet kao 192.168.1.16/28 mogu biti uneseni i lista individualnih IP adresa će biti generisana.

en: Enter authorized SSH keys for this user
bs: Unesite autorizovane SSH ključeve za ovog korisnika

en: Enter multiple vouchers separated by space or newline. All valid vouchers will be marked as expired.
bs: Unesite više vaučera razdvojenih razmakom ili novim redom. Svi validni će biti označeni kao istekli.

en: Enter multiple vouchers separated by space or newline. The remaining time, if valid, will be shown for each voucher.
bs: Unesite više vaučera razdvojenih razmakom ili novim redom. Preostalo vrijeme, ako je validno, će biti prikazano za svaki vaučer.

en: Enter ports as desired, with a single port or port range per entry. Port ranges can be expressed by separating with a colon.
bs: Unesite portove po želji, sajednim portom ili port intervalom po unosu. Port intervali mogu biti izraženi razmaknuti zarezom.

en: Enter the DHCP option number and the value for each item to include in the DHCP lease information.
bs: Unesite broj DHCP opcije i vrijednost za svaki predmet za uključivanje u informacije o DHCP posudbama.

en: Enter the IP address of the RADIUS server.
bs: Unesite IP adresu RADIUS servera.

en: Enter the IP address of the firewall to which the selected configuration sections should be synchronized.%1$s%1$sXMLRPC sync is currently only supported over connections using the same protocol and port as this system - make sure the remote system's port and protocol are set accordingly!%1$sDo not use the Synchronize Config to IP and password option on backup cluster members!
bs: Unesite IP adresu firewalla kome će odabrane sekcije konfiguracije biti sinhronizirane. %1$s%1$sXMLRPC sinhronizacija je trenutno samo podržana konekcijama koje koriste isti protokol i port kao i ovaj sistem - pobrinite se da port udaljenog sistema i protokol su postavljene na odgovarajući način!%1$sNemojte koristiti Sinhroniziraj konfiguraciju sa IPom i opciju za lozinku na backup klaster članovima!

en: Enter the IP address of the next server
bs: Unesite IP adresu sljedećeg servera

en: Enter the IP address the L2TP server should give to clients for use as their "gateway". %1$sTypically this is set to an unused IP just outside of the client range.%1$s%1$sNOTE: This should NOT be set to any IP address currently in use on this firewall.
bs: Unesite IP adresu L2TP servera koja će se dati klijentima kao njihov "gejtvej". %1$sTipično se ovo postavlja na neki IP koji se ne koristi izvan dometa klijenata.%1$s%1$sNAPOMENA: Ovo ne bi trebalo biti postavljeno na bilo koju IP adresu koju firewall koristi.

en: Enter the IP address the PPPoE server should give to clients for use as their "gateway".%1$sTypically this is set to an unused IP just outside of the client range.%1$sNOTE: This should NOT be set to any IP address currently in use on this firewall.
bs: Unesite IP adresu PPPoE servera koja bi se trebala dati klijentima za korištenje kao njihov zadani "gateway". %1$sTipično je ovo postavljeno na IP koji se ne koriti izvan dometa klijenta.%1$sNAPOMENA: Ovo ne bi trebalo biti postavljeno ni na jednu IP adresu koju firewall koristi.

en: Enter the Pre-Shared Key string.
bs: Unesite string za Ranije-Dijeljeni Ključ.

en: Enter the Roll# (0..%d) found on top of the generated/printed vouchers
bs: Unesi Roll # (0..%d) pronađen na vrhu generisanih/isprintanih vaučera

en: Enter the VHID group password.
bs: Unesite lozinku VHID grupe.

en: Enter the VHID group that the machines will share.
bs: Unesi VHID grupu koju će mašine dijeliti.

en: Enter the VLAN tag (1-4094):
bs: Unesite VLAN tag (1-4094):

en: Enter the WAN interface name or 'a' for auto-detection
bs: Unesi WAN ime interfacea ili 'a' za auto-detekciju

en: Enter the X.509 common name for the client certificate, or the username for VPNs utilizing password authentication. This match is case sensitive.
bs: Unesite X.509 zajedničko ime za klijentni certifikat, ili korisničko ime za VPNove koristeći autentikaciju preko lozinke. Ovaj unos je osjetljiv na velika i mala slova.

en: Enter the complete fully qualified domain name. Example: myhost.dyndns.org%1$sDNS Made Easy: Dynamic DNS ID (NOT hostname)%1$she.net tunnelbroker: Enter the tunnel ID.%1$sGleSYS: Enter the record ID.%1$sDNSimple: Enter only the domain name.%1$sNamecheap, Cloudflare, GratisDNS, Hover: Enter the hostname and the domain separately, with the domain being the domain or subdomain zone being handled by the provider.
bs: Unesite potpuno kvalifikovano ime domene. Primjer: myhost.dyndns.org%1$sDNS Made Easy: Dinamički DNS ID (NE hostname)%1$she.net. tunnelbroker: Unesite tunnel ID.%1$sGleSYS: unesite ID unosa.%1$sDNSimple: Unesite samo ime domene. %1$sNamecheap, Cloudflare, GratisDNS, Hover: Unesite hostname i domenu odvojeno, tako da je domena ili zona subdomene konfigurisana od strane provajdera.

en: Enter the dynamic DNS domain key name which will be used to register client names in the DNS server.
bs: Unesite ime ključa dinamičkog DNS domena koji će se koristiti za registraciju klijent imena u DNS serveru.

en: Enter the dynamic DNS domain key secret which will be used to register client names in the DNS server.
bs: Unesite dinamički DNS ključ domena koji će biti korišten za registriranje klijent imena u DNS serveru

en: Enter the e-mail account password for SMTP authentication.
bs: Unesite e-mail lozinku naloga za SMTP autentikaciju.

en: Enter the e-mail address to send email notifications to.
bs: Unesite e-mail adresu na koju će se slati email notifikacije.

en: Enter the e-mail address username for SMTP authentication.
bs: Unesite korisničko ime e-mail adrese za SMTP autentikaciju.

en: Enter the external (usually on a WAN) subnet's starting address for the 1:1 mapping. The subnet mask from the internal address below will be applied to this IP address.
bs: Unesite eksternu (obično WAN) subnet početnu adresu za 1:1 mapiranje. Subnet maska interne adrese koja se nalazi ispod neće biti primijenjeno za ovu IP adresu.

en: Enter the external source %1$sPort or Range%2$s used for remapping the original source port on connections matching the rule. %3$sPort ranges are a low port and high port number separated by ":".%4$sLeave blank when %1$sStatic Port%2$s is checked.
bs: Unesite eksterni izvor %1$sPort ili domet%2$s korišten za remapiranje originalnog izvornog porta na konekcijama koje se poklapaju sa pravilom. %3$ssPort dometi su niski portovi i visoki portovi te njihovi brojevi razdvojeni sa ":".%4$sOstavi prazno kada %1$sStatični port%2$s je odabran.

en: Enter the internal (LAN) subnet for the 1:1 mapping. The subnet size specified for the internal subnet will be applied to the external subnet.
bs: Unesite interni (LAN) subnet za 1:1 mapiranje. Veličina subneta specificirana za interni subnet će biti primijenjena za eksterni.

en: Enter the internal IP address of the server on which to map the ports.%s e.g.: 192.168.1.12
bs: Unesi internu IP adresu servera na kojem će se mapirati portovi. %s npr. 192.168.1.12

en: Enter the modem initialization string here. Do NOT include the "AT" string at the beginning of the command. Many modern USB 3G modems don't need an initialization string.
bs: Unesite string inicijalizacije modema ovdje. Ne uključujte "AT" string na početku komande. Mnogi moderni USB 3g modemi ne trebaju string za inicijalizaciju.

en: Enter the name of the queue here. Do not use spaces and limit the size to 15 characters.
bs: Unesite ime reda ovdje. Nemojte koristiti razmake i limitirajte dužinu imena na 15 znakova.

en: Enter the name to register with the Growl server.
bs: Unesite ime za registraciju sa Growl serverom.

en: Enter the number of vouchers (1..%d) found on top of the generated/printed vouchers. WARNING: Changing this number for an existing Roll will mark all vouchers as unused again
bs: Unesi broj vaučera (1..%d) pronađenih na vrhu generisanih/isprintanih vaučera. UPOZORENJE: mijenjanje ovog broja za već postojeći Roll će označiti sve vaučere kao da nisu iskorišteni.

en: Enter the number of webConfigurator processes to run. This defaults to 2. Increasing this will allow more users/browsers to access the GUI concurrently.
bs: Unesite broj webConfigurator procesa za pokretanje. Zadano je 2. Povećavanjem ovog broja ćete dozvoliti da više korisnika/browsera pristupa GUIu simultano.

en: Enter the parent interface name for the new VLAN (or nothing if finished):
bs: Unesi ime parent interfacea za novi VLAN (ili ništa ako ste završili):

en: Enter the password of the remote growl notification device.
bs: Unesite lozinku udaljenog growl notifikacijskog uređaja.

en: Enter the port to accept polling events on (default 161).
bs: Unesite port za prihvatanje polling eventova na (zadano je 161)

en: Enter the port to send the traps to (default 162)
bs: Unesite port za slanje trapova ka (zadano 162)

en: Enter the primary domain name server IP address for the dynamic domain name.
bs: Unesite ime domene primarne IP adrese za dinamičko ime domene

en: Enter the primary domain name server IPv4 address for the dynamic domain name.
bs: Unesite primarno ime domene IPv4 adrese za dinamičko ime domene

en: Enter the public IP address or host name of the remote gateway.
bs: Unesite javnu IP adresu ili hostname udaljenog gejtveja.

en: Enter the root-path string. This overrides setting on main page.
bs: Unesite string za root-putanju. Ovo overridea postavke na glavnoj stranici.

en: Enter the root-path-string, overrides setting on main page.
bs: Unesite root-path string, overridea postavku na glavnoj stranici.

en: Enter the shared secret that will be used to authenticate to the RADIUS server.
bs: Unesite dijeljenu tajnu koja će biti korištena za autentikaciju prema RADIUS serveru.

en: Enter the shared secret that will be used to authenticate to the backup RADIUS server.
bs: Unesite dijeljenu tajnu koja će biti korištena za autentikaciju backup RADIUS servera.

en: Enter the text between &quot;$&quot; and &quot;*&quot; of a NMEA command string:
bs: Unesite tekst između &quot;$&quot; i &quot;*&quot; od NMEA komandnog stringa:

en: Enter the trap server name
bs: Unesite trap server ime

en: Enter the webConfigurator password of the system entered above for synchronizing the configuration.%1$sDo not use the Synchronize Config to IP and password option on backup cluster members!
bs: Unesite lozinku webConfigurator sistema unesenog iznad za sinhronizaciju konfiguracije. %1$sNe koristite sinhroniziraj konfiguraciju sa IPom i opciju lozinke na backup klaster članovima!

en: Enter the webConfigurator username of the system entered above for synchronizing the configuration.%1$sDo not use the Synchronize Config to IP and username option on backup cluster members!
bs: Unesite webConfigurator korisničko ime sistema uneseno iznad za sinhronizaciju konfiguracije. %1$sNe koristite Sinhroniziraj konfiguraciju sa IPom i opciju korisničkog imena na backup klaster članovima!

en: Enter timeout in seconds for connection to be established (sec.) Default is 45 sec.
bs: Unesite vrijeme timeouta za uspostavljanje konekcije (sek). Zadano je 45 sekundi.

en: Enter value for Reflection timeout in seconds.%1$sNote: Only applies to Reflection on port forwards in NAT + proxy mode.
bs: Unesite vrijednost za istek reflekcije u sekundama.%1$sNapomena: Samo je primjenjivo na reflekciju na forwardanju portova u načinu rada NAT + proxy.

en: Entire Subtree
bs: Cijelo podstablo

en: Entry added
bs: Unos dodan

en: Entry added %s
bs: Unos dodan %s

en: Error
bs: Greška

en: Error 700
bs: Greška 700

en: Error 799
bs: Greška 799

en: Error code is '%1$s' - %2$s
bs: Error kod je '%1$s' - %2$s

en: Error code received
bs: Kod greške dobijen

en: Error comparing installed with latest version available
bs: Greška u poređenju instalirane i zadnje dostupne verzije

en: Error comparing version
bs: Greška pri poređenju verzija

en: Error creating WebGUI Certificate: openssl library returns: %s
bs: Greška prilikom kreiranja WebGUI certifikata: openssl biblioteka vraća: %s

en: Error creating interface with mode %1$s.	 The %2$s interface may not support creating more clones with the selected mode.
bs: Greška prilikom kreiranja interfacea sa načinom rada %1$s. %2$s interface možda ne podržava stvaranje više klonova na odabrani način.

en: Error creating socket!
bs: Greška pri stvaranju utikača!

en: Error locator:
bs: Lokator greške:

en: Error message displayed for expired vouchers on captive portal error page ($PORTAL_MESSAGE$).
bs: Poruka greške koja je prikazana za vaučere koji su istekli na stranici zabranjenog portala ($PORTAL_MESSAGE$).

en: Error message displayed for invalid vouchers on captive portal error page ($PORTAL_MESSAGE$).
bs: Greška poruke prikazane za pogrešne vaučere na zabranjenom portalu te njegovoj error stranici ($PORTAL_MESSAGE$).

en: Error occurred creating interface, please retry.
bs: Greška pri kreiranju interfacea, molimo pokušajte ponovo.

en: Error on Google's end, retry in 5 minutes
bs: Greška na googleovom kraju, pokušajte ponovo za 5 minuta

en: Error returned while trying to parse %s
bs: Greška vraćena dok se prosljeđivao %s

en: Error sending request:
bs: Greška tokom slanja zahtjeva:

en: Error starting gateway monitor for %s
bs: Greška pri pokretanju gateway monitora za %s

en: Error while writing file.
bs: Greška prilikom pisanja fajla.

en: Error: %1$s Description: %2$s
bs: Greška: %1$s Opis: %2$s

en: Error: %s could not be traced/resolved
bs: Greška: %s nije mogao biti upraćen/nađen

en: Error: Cannot write IPsec CA file for %s
bs: Greška: Nemoguće pisati IPsec CA fajl za %s

en: Error: Cannot write IPsec CRL file for %s
bs: Greška: nemoguće pisati IPsec CRL fajl za %s

en: Error: Cannot write phase1 certificate file for %s
bs: Greška: Nemoguće pisati certifikat fajl faze 1 za %s

en: Error: Cannot write phase1 key file for %s
bs: Greška: Nemoguće pisati ključ fajla faze 1 za %s

en: Error: Invalid certificate hash info for %s
bs: Greška: Pogrešan certifikatski heš info za %s

en: Error: Invalid phase1 certificate reference for %s
bs: Greška: Pogrešna faza1 referenca certifikata za %s

en: Error: attempting to write DUID file - File write error
bs: Greška: pokušaj pisanja DUID fajla - greška pri pisanju

en: Error: attempting to write DUID file - Invalid DUID detected
bs: Greška: pokušaj pisanja DUID fajla - pogrešan DUID detektovan

en: Error: cannot open %1$s in system_generate_nginx_config().%2$s
bs: Greška: nemoguće otvoriti %1$s u system_generate_nginx_config().%2$s

en: Error: cannot open %s in DHCP6_Config_File_Override() for reading.
bs: Greška: nije moguće otvoriti %s u DHCP6_Config_File_Override() za čitanje.

en: Error: cannot open %s in DHCP_Config_File_Override() for reading.
bs: Greška: nije moguće otvoriti %s u DHCP_Config_File_Override() za čitanje.

en: Error: cannot open '%1$s' in captiveportal_write_elements()%2$s
bs: Greška: nemoguće otvoriti '%1$s' u captiveportal_write_elements()%2$s

en: Error: cannot open certificate file in system_webgui_start().%s
bs: Greška: nemoguće otvoriti certifikatski fajl u system_webgui_start(). %s

en: Error: cannot open certificate key file in system_webgui_start().%s
bs: Greška: nemoguće otvoriti certifikatski ključ fajl u system_webgui_start().%s

en: Error: cannot open dhclient_%s.conf in interface_dhcp_configure() for writing.
bs: Greška: nije moguće otvoriti dhclient_%s.conf u interface_dhcp_configure() za pisanje.

en: Error: cannot open dhcpd.conf in services_dhcpdv4_configure().%s
bs: Greška: nemoguće otvoriti dhcp.conf u services_dhcpdv4_configure().%s

en: Error: cannot open dmesg.boot in system_dmesg_save().%s
bs: Greška: nemoguće otvoriti dmesg.boot u system_dmesg_save().%s

en: Error: cannot open hosts file in system_hosts_generate().
bs: Greška: nemoguće otvoriti host fajl u system_hosts_generate().

en: Error: cannot open mpd.conf in vpn_l2tp_configure().
bs: Greška: nemoguće otvoriti mpd.conf u vpn_l2tp_configure().

en: Error: cannot open mpd.conf in vpn_pppoe_configure().
bs: Greška: nemoguće otvoriti mpd.conf u vpn_pppoe_configure().

en: Error: cannot open mpd.secret in vpn_l2tp_configure().
bs: Greška: nemoguće otvoriti mpd.secret u vpn_l2tp_configure().

en: Error: cannot open mpd.secret in vpn_pppoe_configure().
bs: Greška: nemoguće otvoriti mpd.secret u vpn_pppoe_configure().

en: Error: cannot open mpd_%1$s.conf in interface_ppps_configure().%2$s
bs: Greška: Nije moguće otvoriti mpd__%1$s.conf u interface_ppps_configure().%2$s

en: Error: cannot open radvd.conf in services_radvd_configure().
bs: Greška: Nemoguće otvoriti radvd.conf u services_radvd_configure().

en: Error: cannot open snmpd.conf in services_snmpd_configure().%s
bs: Greška: nemoguće otvoriti snmpd.conf u services_snmpd_configure().%s

en: Error: cannot open syslog.conf in system_syslogd_start().%s
bs: Greška: Nemoguće otvoriti syslog.conf u system_syslogd_start().%s

en: Error: cannot write voucher.cfg
bs: Greška: nemoguće pisati voucher.cfg

en: Error: could not open XML input
bs: Greška: nije moguće otvoriti XML input

en: Errors In
bs: Errori in

en: Errors Out
bs: Errori out

en: Everything
bs: Sve

en: Example
bs: Primjer

en: Example: &amp;(objectClass=inetOrgPerson)(mail=*@example.com)
bs: Primjer: &amp;(objectClass=inetOrgPerson)(mail=*@example.com)

en: Excess Peer
bs: Viška peer

en: Exchange Information Only
bs: Informacije o razmjeni samo

en: Exclude
bs: Isključi

en: Exclude traffic from LAN subnet to LAN IP address from IPsec.
bs: Isključuje promet sa LAN subneta na LAN IP adresu od IPsec-a.

en: Excludes the address from a later, more general, rule.
bs: Isključuje adresu iz kasnijeg, opštijeg pravila.

en: Execute
bs: pokreni

en: Execute PHP Commands
bs: Pokreni PHP komande

en: Execute Shell Command
bs: Pokreni shell komandu

en: Execute the entered command
bs: Pokreni unesenu komandu

en: Execute this PHP Code
bs: Pokreni PHP kod

en: Executing custom_php_global_functions()...
bs: Pokrećem custom_php_global_functions()...

en: Executing custom_php_install_command()...
bs: Pokrećem custom_php_install_command()...

en: Executing custom_php_resync_config_command()...
bs: Pokrećem custom_php_resync_config_command()...

en: Existing Certificate Authority
bs: Već postojeći autoritativni certifikat

en: Existing Certificate Choice
bs: Postojeći izbor certifikata

en: Existing Certificate Revocation List
bs: Postojeća lista ukinutih certifikata

en: Expansion
bs: Ekspanzija

en: Expect
bs: Očekuj

en: Experimental Bit 0x20 Support
bs: Eksperimentalna bit 0x20 podrška

en: Expiration
bs: Istek

en: Expiration date
bs: Datum isteka

en: Expire
bs: Isteklo

en: Expire Vouchers
bs: Istekli vaučeri

en: Expired voucher message
bs: Poruka o isteklom vaučeru

en: Expires at
bs: Ističe u

en: Expires idle connections quicker. More efficient use of CPU and memory but can drop legitimate idle connections
bs: Odsutne konekcije brže ističu. Efikasnije korištenje CPU i memorije ali postoji mogućnost odbacivanja legitimnih odsutnih konekcija.

en: Expires in
bs: Ističe za

en: Expiry
bs: Istek

en: Explicitly set speed and duplex mode for this interface.%sWARNING: MUST be set to autoselect (automatically negotiate speed) unless the port this interface connects to has its speed and duplex forced.
bs: Eksplicitno postavi brzinu i duplex način za ovaj interface. %sUPOZORENJE: MORA se postaviti na autoselect (automatski reguliši brzinu) osim ako port ovog interfacea na koji se spaja ima svoju brzinu i forsirani duplex.

en: Export CA
bs: Eksportuj CA

en: Export CRL
bs: Izvoz CRL

en: Export Certificate
bs: Izvezi certifikat

en: Export Graph
bs: Eksportuj graf

en: Export Key
bs: Izvezi ključ

en: Export P12
bs: Izvezi P12

en: Export Request
bs: Izvezi zahtjev

en: Export key
bs: Eksportuj Ključ

en: Export vouchers for this roll to a .csv file
bs: Exportuj vaučere za ovaj roll u .csv fajlu

en: Extended Authentication (Xauth)
bs: Proširena autentikacija (Xauth)

en: Extended query
bs: Produženi upit

en: Extensible Authentication Protocol
bs: Proširivi autentikacijski protokol

en: External IP
bs: Eksterni IP

en: External Prefix
bs: Eksterni prefiks

en: External Signing Request
bs: Vanjski zahtjev za verifikaciju

en: External subnet
bs: Eksterni subnet

en: Extra Options
bs: Dodatne opcije

en: FAILED
bs: PALO

en: FQDN or Hostname
bs: FQDN ili hostname

en: FQDN query
bs: FQDN upit

en: FQDN reply
bs: FQDN odgovor

en: Factory Defaults
bs: Vrati na fabričke postavke

en: Factory Defaults Reset
bs: Vrati na fabričke postavke

en: Factory Reset
bs: tvorničke postavke

en: Failed
bs: Nije uspjelo

en: Failed to add pass rule.
bs: Greška pri dodavanju pass pravila.

en: Failed to clone interface %1$s with error code %2$s, output %3$s
bs: Greška pri kloniranju interfacea %1$s sa kodom greške %2$s, izlaz %3$s

en: Failed to construct OpenVPN server configuration. The selected DH Parameter length cannot be used.
bs: Greška pri stvaranju OpenVPN server konfiguracije. Selektovana dužina DH parametra ne može biti korištena.

en: Failed to create block rule, alias, or add host.
bs: Greška pri stvaranju pravila za blokiranje, aliasa ili dodavanja hosta.

en: Failed to delete Certificate %1$s from CRL %2$s.
bs: Greška prilikom brisanja certifikata %1$s sa CRL %2$s.

en: Failed to download alias %s
bs: Preuzimanje aliasa %s nije uspjelo

en: Failed to encrypt/decrypt data!
bs: Greška pri enkriptovanju/dekriptovanju podataka

en: Failed to install package.
bs: Greška prilikom instaliranja paketa.

en: Failed to install package: %s.
bs: Greška prilikom instaliranja paketa: %s

en: Failed to read file.
bs: Greška pri čitanju fajla.

en: Failed to write file.
bs: Greška pri pisanju fajla.

en: Failed to write user DUID file!
bs: Greška pi pisanju korisničkog DUID fajla!

en: Failover Group
bs: Failover grupa

en: False Ticker
bs: Lažni tiker

en: February
bs: Februar

en: Feeds
bs: Feedovi

en: File
bs: Fajl

en: File %s is a directory.
bs: Fajl %s je direktorij.

en: File Manager
bs: Upravitelj fajlovima

en: File does not exist or is not a regular file.
bs: Fajl ne egzistira ili nije regularan fajl.

en: File not found %s.
bs: Fajl nije pronađen %s.

en: File saved successfully.
bs: Fajl spašen uspješno.

en: Filter Expression
bs: Filter ekspresija

en: Filter Reload
bs: Ponovno učitavanje filtera

en: Filter actions
bs: Filtriranje radnji

en: Filter by:
bs: Filtriraj po:

en: Filter expression
bs: Izraz filtera

en: Filter field:
bs: Polje filtera:

en: Filter interface
bs: Filter interfejsa

en: Filter is disabled.  Not loading rules.
bs: Filter je isključen. Ne učitavam pravila.

en: Filter rule association
bs: Asocijacija filter pravila

en: Filter text:
bs: Tekst filtera:

en: Filters
bs: Filteri

en: Final Certificate data
bs: Konačni podaci certifikata

en: Firewall Adaptive Timeouts
bs: Firewall adaptivni isteci sesije

en: Firewall Advanced
bs: Napredno postavke firewalla

en: Firewall Aliases %s
bs: Firewall aliasi %s

en: Firewall Events
bs: Firewall eventi

en: Firewall Logs
bs: Firewall logovi

en: Firewall Maximum Fragment Entries
bs: Maksimalan broj fragment unosa za firewall

en: Firewall Maximum States
bs: Firewall maksimum stanja

en: Firewall Maximum Table Entries
bs: Firewall maksimalan broj unosa u tablicu

en: Firewall Optimization Options
bs: Opcije optimizacije firewalla

en: Firewall Rules
bs: Firewall Pravila

en: Firewall Status on %s
bs: Firewall status je na %s

en: Firewall aliases
bs: Firewall aliasi

en: Firewall rule ID %s is managed by this rule
bs: Firewall pravilo sa IDom %s upravlja ovim pravilom

en: Firewall rules
bs: Firewall pravila

en: Firewall schedule configured.
bs: Firewall raspored konfigurisan.

en: Firewall schedule deleted.
bs: Firewall raspored obrisan

en: Firewall schedules
bs: Firewall rasporedi

en: Firewall: NAT: 1:1 - deleted NAT 1:1 mapping.
bs: Firewall: NAT: 1:1 - obrisana NAT 1:1 mapiranja.

en: Firewall: NAT: 1:1 - deleted selected NAT 1:1 mappings.
bs: Firewall: NAT: 1:1 - obrisana selektovana NAT 1:1 mapiranja.

en: Firewall: NAT: 1:1 - disabled a NAT 1:1 rule.
bs: Firewall: NAT: 1:1 - isključeno NAT 1:1 pravilo.

en: Firewall: NAT: 1:1 - enabled a NAT 1:1 rule.
bs: Firewall: NAT: 1:1 - uključeno NAT 1:1 pravilo.

en: Firewall: NAT: 1:1 - reordered NAT 1:1 mappings.
bs: Firewall: NAT: 1:1 - preuređena NAT 1:1 mapiranja.

en: Firewall: NAT: 1:1 - saved/edited NAT 1:1 mapping.
bs: Firewall: NAT: 1:1 - spašeno/modifikovano NAT 1:1 mapiranje

en: Firewall: NAT: NPt - deleted NPt mapping.
bs: Firewall: NAT: NPt - obrisana NPt mapiranja.

en: Firewall: NAT: NPt - deleted selected NPt mappings.
bs: Firewall: NAT: NPt - obrisana označena NPt mapiranja.

en: Firewall: NAT: NPt - disabled NPt rule.
bs: Firewall: NAT: NPt - isključeno NPt pravilo.

en: Firewall: NAT: NPt - enabled NPt rule.
bs: Firewall: NAT: NPt - uključeno NPt pravilo.

en: Firewall: NAT: NPt - reordered NPt mappings.
bs: Firewall: NAT: NPt - preuređena NPt mapiranja.

en: Firewall: NAT: NPt - saved/edited NPt mapping.
bs: Firewall: NAT: NPt - sačuvano/modifikovano NPt mapiranje.

en: Firewall: NAT: Outbound - deleted outbound NAT mapping.
bs: Firewall: NAT: Van opsega - obrisana vanopsežna NAT mapiranja.

en: Firewall: NAT: Outbound - deleted selected outbound NAT mappings.
bs: Firewall: NAT: Van opsega - obrisana selektovana vanopsežna NAT mapiranja.

en: Firewall: NAT: Outbound - disabled outbound NAT rule.
bs: Firewall: NAT: Van opsega - isključeno vanopsežno NAT pravilo.

en: Firewall: NAT: Outbound - enabled outbound NAT rule.
bs: Firewall: NAT: Van opsega - uključeno vanopsežno NAT pravilo.

en: Firewall: NAT: Outbound - reordered outbound NAT mappings.
bs: Firewall: NAT: Outbound - preuređena vanjska NAT mapiranja.

en: Firewall: NAT: Outbound - saved outbound NAT settings.
bs: Firewall: NAT: Van opsega - spašene vanopsežne NAT postavke.

en: Firewall: NAT: Outbound - saved/edited outbound NAT mapping.
bs: Firewall: NAT: Vanopsežno - spašeno/modifikovano vanopsežno NAT mapiranje.

en: Firewall: NAT: Port Forward - saved/edited a port forward rule.
bs: Firewall: NAT: Port Forward - spašeno/modifikovano pravilo za portove.

en: Firewall: NAT: Port forward, enable/disable NAT rule
bs: Firewall: NAT: Forwardanje portova, uključi/isključi NAT pravilo

en: Firewall: Rules - deleted a firewall rule.
bs: Firewall: Pravila - obrisano firewall pravilo

en: Firewall: Rules - deleted selected firewall rules.
bs: Firewall: Pravila - obrisana selektovana firewall pravila

en: Firewall: Rules - disabled a firewall rule.
bs: Firewall: Pravila - isključeno firewall pravilo

en: Firewall: Rules - enabled a firewall rule.
bs: Firewall: Pravila - uključeno firewall pravilo

en: Firewall: Rules - reordered firewall rules.
bs: Firewall: Pravila - Preuređena firewall pravila

en: Firewall: Rules - saved/edited a firewall rule.
bs: Firewall: Pravila- spašeno/editovano firewall pravilo.

en: Firmware Branch
bs: Grana firmware-a

en: First level tag cannot be empty.
bs: Tag prvog nivoa ne može biti prazan.

en: Five (Client+4xIntermediate+Server)
bs: Pet (Klijent + 4xSrednja + Server)

en: Fixed (Remains visible at top of page)
bs: Popravljeno (ostaje vidljivo na vrhu stranice)

en: Flags
bs: Oznake

en: Floating rules are evaluated on a first-match basis (i.e. the action of the first rule to match a packet will be executed) only if the 'quick' option is checked on a rule. Otherwise they will only match if no other rules match. Pay close attention to the rule order and options chosen. If no rule here matches, the per-interface or default rules are used.
bs: Floating pravila će biti evaluisana po principu prvog poklapanja (tj. radnja prvog pravila koje se poklopi sa paketom će biti izvršena) samo ako je 'quick' opcija čekirana na pravilu. Inače će se oni poklopiti samo ako se ne poklopi ni sa jednim drugim pravilom. Obratite pažnju na redoslijed pravila i opcije koje ste izabrali. Ako se niti jedno pravilo ne poklapa, po interfaceu ili zadana pravila će biti korištena.

en: Flush all states when a gateway goes down
bs: Očisti sva stanja kada gejtvej bude ugašen

en: For Certificate Signing Requests, These attributes are added to the request but they may be ignored or changed by the CA that signs the request.
bs: Za zahtjeve za potpis certifikata (CSR), ovi atributi su dodani na zahtjev ali mogu biti ignorisani ili promjenjeni od strane CA koji potpisuje zahtjev.

en: For ICMP rules on IPv4+IPv6, one or more of these ICMP subtypes may be specified. (Other ICMP subtypes are only valid under IPv4 %1$sor%2$s IPv6, not both)
bs: Za ICMP pravila na IPv4+IPv6, jedno ili više ICMP subtipova može biti specificirano. (Drugi ICMP subtipovi su validni samo pod IPv4 %1$sili%2$s IPv6, ne oboje)

en: For ICMP rules on IPv4, one or more of these ICMP subtypes may be specified.
bs: Za ICMP pravila na IPv4, jedno ili više ICMP subtipova se može specificirati.

en: For ICMP rules on IPv6, one or more of these ICMP subtypes may be specified.
bs: Za ICMP pravila na IPv6, jedno ili više ICMP subtipova može biti specificirano.

en: For IEEE 802.11g, use the specified technique for protecting OFDM frames in a mixed 11b/11g network.
bs: Za IEEE 802.11g, koristite specificiranu tehniku za zaštitu OFDM frejmova u mješovitoj 11b/11g mreži

en: For Internal Certificates, these attributes are added directly to the certificate as shown.
bs: Za Interne Certifikate, ovi atributi su dodani direktno na certifikate kao što je pokazano.

en: For a list of available options please visit this %1$s URL%2$s.%3$s
bs: Za listu dostupnih opcija molimo posjetite %1$s URL %2$s. %3$s

en: For backward compatibility, when an older peer connects that does not support NCP, OpenVPN will use the Encryption Algorithm requested by the peer so long as it is selected in this list or chosen as the Encryption Algorithm.
bs: Za obostranu kompatibilnost, kada se spoji stariji peer koji ne podržava NCP, OpenVPN će koristiti enkripcijski algoritam zahtijevan od peera dokle god je on selektovan u listi ili ako je odabran kao enkripcijski algoritam.

en: For cbq and fairq the range is 0 to 7. The default is 1. For priq the range is 0 to 15, queues with a higher priority are preferred in the case of overload.
bs: Za cbq i fairq opseg je od 0 do 7.Defaultni je 1. Za priq opseg je od 0 do 15, redovi sa većim prioritetom su prihvatljiviji u slučaju preopterećenja.

en: For more information on CARP and the above values, visit the OpenBSD %s
bs: Za više informacija o CARPu i vrijednostima iznad posjetite OpenBSD %s

en: For queues under the same parent this specifies the share that a queue gets(values range from 1 to 100), it can be left blank otherwise.
bs: Za redove pod istim roditeljem ovo specificira dijeljenja reda (vrijednosti između 1 i 100), ali se može ostaviti praznim.

en: For this type of vip localhost is not allowed.
bs: Za ovaj tip vip localhosta nije dozvoljeno.

en: Force
bs: Forsiraj

en: Force Config Sync
bs: Forsiraj sinhronizaciju konfiguracije

en: Force DNS cache update
bs: Forsiraj ažuriranje DNS keša

en: Force IPv4 DNS Resolution
bs: Forsiraj razrješenje IPv4 DNS-a

en: Force all client generated traffic through the tunnel.
bs: Forsiraj sav klijentom generisan promet kroz tunel.

en: Force dynamic DNS hostname to be the same as configured hostname for Static Mappings
bs: Forsiraj dinamički DNS host ime da bude isto kao konfigurisani hostname za statička mapiranja

en: Force rebuild of mirror consumer
bs: Forsiraj rebuild korisničkog mirrora

en: Force state
bs: Forsiraj stanje

en: Force the AP to rekey whenever a client disassociates
bs: Forsiraj AP ključ na ponovu dodjelu kada god sekorisnik distancira

en: Force the card to use WME (wireless QoS)
bs: Forsiraj karticu da korsti WME (wireless QoS)

en: Forcefully reloading IPsec
bs: Ponovno učitavanje IPsec silom...

en: Forget Disconnected Disks
bs: Zaboravi odspojene diskove

en: Forget all formerly connected consumers
bs: Zaboravi sve prvobitno konektovane korisnike

en: Formatted
bs: Formatirano

en: Formatted/Raw Display
bs: Formatirani/Sirovi prikaz

en: Forward
bs: Naprijed

en: Forward Delay needs to be an integer between 4 and 30.
bs: Kašnjenje unaprijed mora biti cijeli broj između 4 i 30.

en: Forward time
bs: Ubrzaj vrijeme

en: Forward/Reverse Display
bs: Naprijed/Obrni Prikaz

en: Found configuration on %1$s.%2$s
bs: Pronađena konfiguracija na %1$s.%2$s

en: Four (Client+3xIntermediate+Server)
bs: Četiri (Klijent + 3xSrednja + Server)

en: FreeBSD Handbook
bs: FreeBSD priručnik

en: FreeBSD default
bs: FreeBSD zadano

en: Fri
bs: Pet

en: From
bs: od

en: From e-mail address
bs: Od e-mail adrese

en: From port
bs: Sa porta

en: Fudge Time
bs: Fudge vrijeme

en: Fudge Time 1
bs: Fudge vrijeme 1

en: Fudge Time 2
bs: Fudge vrijeme 2

en: Fudge time 1 is used to specify the GPS PPS signal offset (default: 0.0).
bs: Fudge vrijeme 1 se koristi za specificiranje GPS PPS signal offseta (zadano 0.0).

en: Fudge time 2 is used to specify the GPS time offset (default: 0.0).
bs: Fudge vrijeme 2 se koristi za specificiranje GPS offseta vremena (zadano 0.0).

en: Fudge time is used to specify the PPS signal offset from the actual second such as the transmission delay between the transmitter and the receiver (default: 0.0).
bs: Fudge vrijeme se koristi za specificiranje PPS signal offseta od stvarne sekunde kao prenos kašnjenja između pošiljaoca i primatelja (zadano 0.0).

en: Full
bs: Cijelo

en: Full name
bs: Puno ime

en: Fully Qualified Domain Name
bs: Puno kvalifikovano ime domene

en: Fully qualified hostname of the host to be updated.
bs: Puno kvalifikovano host ime od hosta kojeg želite ažurirati.

en: GATEWAYS: Group %1$s did not have any gateways up on tier %2$s!
bs: GATEWAYI: Grupa %1$s nije imala nijedan gateway na redu %2$s!

en: GCM Encryption Algorithms cannot be used with Shared Key mode.
bs: GCM enkripcijski algoritmi ne mogu biti korišteni u načinu rada Dijeljenih ključeva

en: GEOM Mirror Information - Mirror Status
bs: GEOM Mirror Informacije - Mirror Status

en: GEOM Mirror Status
bs: GEOM Mirror status

en: GEOM Mirrors
bs: GEOM Mirrori

en: GIF Configuration
bs: GIF konfiguracija

en: GIF Interfaces
bs: GIF interfejsi

en: GIFs
bs: GIFovi

en: GPS Information
bs: GPS informacije

en: GPS Initialization
bs: GPS inicijalizacija

en: GPS Type
bs: GPS tip

en: GRE Configuration
bs: GRE konfiguracija

en: GRE Interfaces
bs: GRE interfejsi

en: GREs
bs: GREovi

en: GUI Log Entries
bs: GUI Log unose

en: GW Group %s
bs: GW grupa %s

en: Gateway "%1$s" cannot be deleted because it is in use on Gateway Group "%2$s"
bs: Gateway "%1$s" ne može biti obrisanjer se koristi u gateway grupi "%2$s"

en: Gateway "%1$s" cannot be deleted because it is in use on Static Route "%2$s"
bs: Gateway "%1$s" ne može biti obrisan jer se koristi u statičkoj ruti "%2$s"

en: Gateway "%1$s" cannot be disabled because it is in use on Gateway Group "%2$s"
bs: Gateway "%1$s" ne  može biti isključen jer se koristi u gateway grupi "%2$s"

en: Gateway "%1$s" cannot be disabled because it is in use on Static Route "%2$s"
bs: Gateway "%1$s" ne  može biti isključen jer se koristi u statičkoj ruti "%2$s"

en: Gateway Action
bs: Gejtvej radnja

en: Gateway Groups
bs: Gejtvej grupe

en: Gateway IP
bs: Gejtvej IP

en: Gateway IP address
bs: Gejtvej IP adresa

en: Gateway IP or Hostname
bs: Gateway IP ili hostname

en: Gateway IPv4
bs: IPv4 gateway

en: Gateway Monitor Events
bs: Gejtvej praćenje eventova

en: Gateway Monitoring
bs: Praćenje gatewaya

en: Gateway Monitoring Daemon
bs: Gateway Daemon Praćenje

en: Gateway name
bs: Ime gatewaya

en: Gateways
bs: Gejtveji

en: Gateways can not be assigned in a rule that applies to both IPv4 and IPv6.
bs: Gejtveji ne mogu biti dodijeljeni pravilu koje se primjenjuje i za IPv4 i IPv6.

en: Gateways can not be used in Floating rules without choosing a direction.
bs: Gejtveji ne mogu biti korišteni u Floating pravilima bez korištenja direkcije.

en: Gateways status could not be determined, considering all as up/active. (Group: %s)
bs: Status gatewaya nije mogao biti očitan, smatra se da su svi uključeni i aktivni. (Grupa: %s)

en: Gateways: removed gateways %s
bs: Gejtvej: uklonjeni gejtveji %s

en: Gathering CPU activity, please wait...
bs: Dobijanje CPU aktivnosti, molimo sačekajte...

en: Gathering Limiter information, please wait...
bs: Preuzimam limiter informacije, molimo sačekajte

en: Gathering PF information, please wait...
bs: Preuzimam PF informacije, molimo sačekajte...

en: Gathering data
bs: Preuzimam podatke

en: Gathering data, please wait...
bs: Uzimam podatke, molimo sačekajte...

en: Gathering pfTOP activity, please wait...
bs: Preuzimam pfTOP aktivnost, molimo sačekajte...

en: General
bs: Generalno

en: General Configuration
bs: Generalna konfiguracija

en: General DNS Forwarder Options
bs: Generalne opcije DNS forwardera

en: General DNS Resolver Options
bs: Generalne Opcije DNS Resolvera

en: General Information
bs: Generalne informacije

en: General Logging Options
bs: Generalne opcije logovanja

en: General Logging Options Setting
bs: Generalne postavke logiranja opcija

en: General Options
bs: Generalne opcije

en: General Settings
bs: Generalne postavke

en: General Setup
bs: Generalne postavke

en: General system error recognized by the system
bs: Generalna sistemska greška prepoznata od strane sistema

en: General system error unrecognized by the system
bs: Generalna sistemska greška nije prepoznata od strane sistema

en: Generate SYN cookies for outbound SYN-ACK packets
bs: Generiši SYN kolačiče za vandometne SYN-ACK pakete

en: Generate new keys
bs: Generiši nove ključeve

en: Generated new self-signed HTTPS certificate (%s)
bs: Generisan novi auto-potpisani HTTPS certifikat (%s)

en: Generating ALTQ queues
bs: Generisanje ALTQ redova

en: Generating Limiter rules
bs: Stvaranje Limiter pravila

en: Generating NAT rules
bs: Generisanje NAT pravila

en: Generating RRD graphs...
bs: Generišem RRD grafove...

en: Generating filter rules
bs: Generisanje filter pravila

en: Generating new MAC address.
bs: Generišem novu MAC adresu.

en: Generating new or stronger DH parameters is CPU-intensive and must be performed manually.
bs: Stvaranje novih ili jačih DH parametara je CPU zahtjevno i mora biti izvršeno ručno.

en: German (Germany)
bs: Njemački (Njemačka)

en: Global Unicast routable IPv6 prefix
bs: Globalni unicast rutabilni IPv6 prefiks

en: GoTo Line #
bs: Idi na liniju #

en: Google Maps Link
bs: Link Google Mapa

en: Graph Settings
bs: Postavke grafa

en: Graph shows last %s seconds
bs: Graf pokazuje posljednjih %s sekundi

en: Gray
bs: Siva

en: Green
bs: Zelena

en: Group
bs: Grupa

en: Group %s successfully deleted.
bs: Grupa %s uspješno obrisana.

en: Group Authentication Source
bs: Izvor grupne autentikacije

en: Group Description
bs: Opis grupe

en: Group Key Rotation
bs: Rotacija grupe ključeva

en: Group Master Key Regeneration
bs: Grupna regeneracija master ključa

en: Group Members
bs: Članovi grupe

en: Group Name
bs: Ime grupe

en: Group Object Class
bs: Klasa grupnog objekta

en: Group Privileges
bs: Privilegije grupe

en: Group Properties
bs: Svojstva grupe

en: Group description, for administrative information only
bs: Opis grupe, samo za administrativnu informaciju

en: Group member attribute
bs: Atribut člana grupe

en: Group membership
bs: Članstvo grupe

en: Group membership query
bs: Grupno članstvo upit

en: Group membership report
bs: Grupno članstvo izvještaj

en: Group membership termination
bs: Grupno članstvo terminiranje

en: Group name
bs: Ime grupe

en: Group name already exists!
bs: Ime grupe već postoji

en: Group name cannot have more than 16 characters.
bs: Ime grupe ne smije imati više od 16 znakova.

en: Group name cannot start with pkg_
bs: Ime grupe ne smije počinjati sa pkg_

en: Group naming Attribute
bs: Atribut koji grupa zadaje

en: Group supplied does not exist.
bs: Predviđena grupa ne postoji.

en: Groups
bs: Grupe

en: Growl IP Address is invalid. Check the setting in System Advanced Notifications.
bs: Growl IP adresa nije ispravna. Provjeri postavke u Naprednim sistemskim notifikacijama.

en: Growl passwords must match
bs: Growl lozinke se moraju poklapati

en: Growl testing notification successfully sent
bs: Growl test notifikacija uspješno poslana.

en: HTML Page Contents
bs: Sadržaj HTML stranici

en: HTTP API DNS Options
bs: HTTP API DNS Opcije

en: HTTP API SSL Options
bs: HTTP API SSL Opcije

en: HTTP Options
bs: Opcije HTTPa

en: HTTP(s) codes must be from RFC2616.
bs: HTTP(s) kodovi moraju biti iz RFC2616.

en: HTTPS Forwards
bs: HTTPS forwardanje

en: HTTPS Options
bs: Opcije HTTPS

en: Halt
bs: Zaustavi

en: Halt System
bs: Zaustavi sistem

en: Halt the system and power off
bs: Zaustavi sistem i isključi

en: Handling of non-IP packets which are not passed to pfil (see if_bridge(4))
bs: Rukovanje non-IP paketima koji nisu prosljeđeni za pfil (vidi if_bridge(4))

en: Hard disk standby time
bs: Hard disk vrijeme čekanja

en: Hard timeout (Minutes)
bs: Teški timeout (u minutama)

en: Hard timeout must be less than or equal to the Default lease time set on DHCP Server
bs: Hard timeout mora biti manji ili jednak zadanog vremena posdube na DHCP serveru.

en: Harden DNSSEC Data option can only be enabled if DNSSEC support is enabled.
bs: Harden DNSSEC Data opcija može biti uključena ako DNSSEC podrška je uključena.

en: Hardware Checksum Offloading
bs: Rasterećivanje hardverskog checksuma

en: Hardware Crypto
bs: Hardverski kripto

en: Hardware Large Receive Offloading
bs: Hardversko rasterećivanje velike pošiljke

en: Hardware Settings
bs: Hardverske postavke

en: Hardware TCP Segmentation Offloading
bs: TCP rasterećenje hardverske segmentacije

en: Hardware crypto
bs: Hardverski kripto

en: Health
bs: Zdravlje

en: Hello time
bs: Hello vrijeme

en: Hello time for STP needs to be an integer between 1 and 2.
bs: Hello vrijeme za STP mora biti cijeli broj između 1 i 2.

en: Help
bs: Pomoć

en: Help for items on this page
bs: Pomoć za iteme na ovoj stranici

en: Help page accessed directly without any page parameter.
bs: Help stranici se pristupa direktno bez parametara za stranicu.

en: Hiadaptive
bs: Hiadaptivni

en: Hide Advanced
bs: Sakrij napredno

en: Hide Advanced Options
bs: Sakrij napredne opcije

en: Hide Custom Options
bs: Sakrij posebne opcije

en: Hide Identity
bs: Sakrij identitet

en: Hide Last Activity
bs: Sakrij posljednju aktivnost

en: Hide SSID
bs: Sakrij SSID

en: Hide Version
bs: Sakrij verziju

en: Hide table comments.
bs: Sakrij komentare tablice

en: High
bs: Visoko

en: High Avail. Sync
bs: HA sinhronizacija

en: High Availability Sync
bs: Visoko dostupna sinhronizacija

en: High Latency
bs: Visoka latentnost / kašnjenje

en: High availability sync settings can be configured here.
bs: Dostupna visoka sinhronizacija te može biti konfigurisana ovdje.

en: High-latency
bs: Visoko-kašnjenje

en: Highest
bs: Najviši

en: Hint
bs: Savjet

en: Hint: 24 is 255.255.255.0
bs: Savjet: 24 je 255.255.255.0

en: Hint: the firewall has limited local log space. Don't turn on logging for everything. If doing a lot of logging, consider using a remote syslog server (see the %1$sStatus: System Logs: Settings%2$s page).
bs: Savjet: firewall ima limitiran prostor za izvještaje. Ne uključujte kreiranje izvještaja za sve. Ako se radi puno izvještaja, razmislite o korištenju udaljenog syslog servera (pogledaj %1$sStatus: Sistemski logovi: Postavke%2$s stranicu).

en: Hold Count
bs: Brojač zadržavanja

en: Hold down CTRL (PC)/COMMAND (Mac) key to select multiple items.
bs: Zadrži CTRL(PC)/COMMAND (Mac) tipku za višestruko odabiranje.

en: Host "%s" could not be resolved.
bs: Host "%s" nije mogao biti vraćen

en: Host "%s" did not respond or could not be resolved.
bs: Host "%s" nije odgovorio ili nije mogao biti dokučen.

en: Host Address
bs: Adresa hosta

en: Host Name
bs: Ime hosta

en: Host Name or IP
bs: Host name ili IP

en: Host Override Options
bs: Opcije host overridea

en: Host Overrides
bs: Overrideovi Hostova

en: Host Resources
bs: Host Resursi

en: Host added successfully
bs: Host je dodan uspješno

en: Host is not on block list:
bs: Host nije na blok listi:

en: Host must be a valid hostname or IP address.
bs: Host mora biti validan hostname ili IP adresa

en: Host name
bs: Ime hosta

en: Host override configured for DNS Resolver.
bs: Host override konfigurisan za DNS resolver.

en: Host override deleted from DNS Resolver.
bs: Host overrideanje obrisano sa DNS resolvera.

en: Host unblocked successfully
bs: Host deblokiran uspješno

en: Host updated is configured as a web redirect and no update was performed.
bs: Ažuriranje hosta je konfigurisano kao redirekcija sa weba i ažuriranje nije izvršeno.

en: Host(s)
bs: Host(ovi)

en: Hostname Error - The hostname (%1$s) doesn't belong to user (%2$s).
bs: Greška host imena - Host ime (%1$s) ne pripada korisniku (%2$s).

en: Hostname [%s] already allowed.
bs: Hostname [%s] je već dozvoljen.

en: Hostname does not exist or DynDNS not enabled
bs: Hostname ne postoji ili DynDNS nije uključen

en: Hostname for Host: header if needed.
bs: Hostname za host: header ako je potrebno

en: Hostname in Menu
bs: Hostname u meniju

en: Hostname only
bs: Samo hostname

en: Hostname or IP
bs: Hostname ili IP

en: Hostname or IP address of proxy server this system will use for its outbound Internet access.
bs: Hostname ili IP adresa proxy servera ovog sistema će koristiti za vanopsežni internetski pristup.

en: Hostname specified does not exist.
bs: Specificirani hostname ne postoji.

en: Hostname specified exists, but not under the username specified.
bs: Specificirani hostname postoji ali ne pod traženim korisničkim imenom.

en: Hostname supplied does not exist.
bs: Dobijeno host ime ne postoji.

en: Hostname supplied does not have offline settings configured.
bs: Predviđeno host ime nema konfigurisane offline postavke.

en: Hostnames in an alias list can only contain the characters A-Z, 0-9 and '-'. They may not start or end with '-'.
bs: Hostnameovi u alias listi mogu sadržavati samo karaktere A-Z, 0-9 i '-'. Ne smiju počinjati ili završavati sa '-'.

en: Hosts blocked from Firewall Log view
bs: Hostovi blokirani sa firewall log pregleda

en: Hour
bs: Sati

en: Hour (0-23)
bs: Sati (0-23)

en: Hourly (0 * * * *)
bs: Svaki sat (0 * * * *)

en: How Forward entries are handled when client indicates they wish to update DNS.  Allow prevents DHCP from updating Forward entries, Deny indicates that DHCP will do the updates and the client should not, Ignore specifies that DHCP will do the update and the client can also attempt the update usually using a different domain name.
bs: Kako forward unosi se gledaju kada klijent kaže da želi da ažurira DNS. Dozvoli zabranjuje DHCPu ažuriranje forward unosa, Zabrani implicira da DHCP će uraditi sva ažuriranja i klijent ne treba ništa da radi, Ignoriši specificira da će DHCP uraditi ažuriranje ali da klijent također može izvršiti ažuriranje koristeći različito ime domene.

en: How long before connection expiry or keying-channel expiry should attempt to negotiate a replacement begin.
bs: Koliko dugo prije nego konekcija ili ključni-kanal istekne, bi pokušaj za dogovor zamjene trebao početi.

en: How often an ICMP probe will be sent in milliseconds. Default is %d.
bs: Koliko često će se ICMP ispitivanje/testiranje slati u milisekundama. Zadano je %d.

en: Hybrid Outbound NAT rule generation.%s(Automatic Outbound NAT + rules below)
bs: Hibridno vanopsežno generisanje NAT pravila.%s(Automatski vanopsežni NAT + pravila ispod)

en: Hybrid RSA + Xauth
bs: Hibrid RSA + Xauth

en: ICMP Subtypes
bs: ICMP podtipovi

en: ICMP subtypes
bs: ICMP subtipovi

en: ICMP types expected to be a list if present, but is not.
bs: ICMP tipovi očekivano imaju listu ako je prisutna, ali nije.

en: ID must be an integer
bs: ID mora biti cijeli broj

en: IGMP Proxy Edit
bs: IGMP modifikovanje proxya

en: IKE Child SA
bs: IKE dijete SA

en: IKE Extensions
bs: IKE ekstenzije

en: IP Address
bs: IP adresa

en: IP Address Changed Successfully!
bs: IP Adresa uspješno promijenjena

en: IP Address Updated Successfully!
bs: Ažuriranje IP adrese uspješno završeno!

en: IP Addresses
bs: IP adrese

en: IP Alias Details
bs: IP Alias Detalji

en: IP Compression
bs: IP kompresija

en: IP Do-Not-Fragment compatibility
bs: IP Ne-Fragmentiraj kompatibilnost

en: IP Protocol
bs: IP protokol

en: IP Random id generation
bs: IP nasumično generisanje id-a

en: IP Updated Successfully!
bs: Ažuriranje IP adrese uspješno

en: IP address
bs: IP adresa

en: IP address changed successfully
bs: Uspješno promijenjena IP adresa

en: IP address is current, no update performed.
bs: IP adresa je trenutna, ažuriranje nije izvršeno

en: IP address of master nodes webConfigurator to synchronize voucher database and used vouchers from.%1$sNOTE: this should be setup on the slave nodes and not the primary node!
bs: IP adresa master čvorova i  webConfiguratora za sinhronizaciju i za korištene vaučere. %1$sNAPOMENA: ovo bi se trebalo postavljati samo na slave čvorovima a ne primarnim!

en: IP address of the RADIUS server
bs: IP adresa RADIUS servera

en: IP address of the RADIUS server to authenticate against.
bs: IP adresa RADIUS servera preko kojeg će se autenticirati.

en: IP address of the authoritative DNS server for this domain%1$se.g.: 192.168.100.100%1$sOr enter # for an exclusion to pass through this host/subdomain to standard nameservers instead of a previous override.%1$sOr enter ! for lookups for this host/subdomain to NOT be forwarded anywhere.
bs: IP adresa autoritativnog DNS servera za ovu domenu%1$snpr: 192.168.100.100%1$sIli unesite # za isključenje prolaza kroz ovaj host/subdomenu  za standardna imena servera umjesto prethodnog overridea. %1$sIli unesite ! za traženja ovog hosta/subdomene da ne bude nigdje forwardana.

en: IP address of the host%1$se.g.: 192.168.100.100 or fd00:abcd::1
bs: IP adresa hosta%1$snpr: 192.168.100.100 ili fd00:abcd::1

en: IP address or host
bs: IP adresa ili host

en: IP address or host type must be an IP address or host name.
bs: IP adresa ili host tip mora biti IP adresa ili host ime.

en: IP addresses appearing in %1$sgreen%2$s are up to date with Dynamic DNS provider.
bs: IP adrese koje se pojavljuju %1$sgreen%2$s su ažurirani sa dinamičkim DNS provajderom.

en: IP or FQDN
bs: IP ili FQDN

en: IP to return for host
bs: IP za vratiti se za host

en: IPComp compression of content is proposed on the connection.
bs: IPComp kompresija sadržaja je predložena na spajanju.

en: IPsec ERROR: Could not find phase 1 source for connection %s. Omitting from configuration file.
bs: IPsec GREŠKA: Nemoguće pronaći source faze 1 za konekciju %s. Izostavljam iz konfiguracijskog fajla.

en: IPsec Logging Controls
bs: IPsec kontrole logovanja

en: IPsec Pre-Shared Key
bs: IPsec Ranije-Šerovan ključ

en: IPsec Pre-Shared Key contains invalid characters.
bs: IPsec Ranije-Podijeljen ključ sadrži nevaljane karaktere.

en: IPsec Status
bs: IPsec status

en: IPsec Tunnel
bs: IPsec tunnel

en: IPsec Tunnels
bs: IPsec tuneli

en: IPsec can be configured %1$shere%2$s.
bs: IPsec može biti konfigurisan %1$sovdje%2$s.

en: IPsec can be configured <a href="vpn_ipsec.php">here</a>.
bs: IPsec može biti konfigurisan <a href="vpn_ipsec.php">ovdje</a>.

en: IPsec can be set to prefer older SAs at %1$s%2$s%3$s.
bs: IPsec može biti postavljen da preferira starije SAove u %1$s%2$s%3$s

en: IPsec client
bs: IPsec klijent

en: IPsec configuration
bs: IPsec konfiguracija

en: IPsec debug mode can be enabled at %1$s%2$s%3$s.
bs: IPsec debagiranje može biti uključeno na %1$s%2$s%3$s.

en: IPsec traffic
bs: IPsec saobraćaj

en: IPv4 Address
bs: IPv4 Adresa

en: IPv4 Configuration Type
bs: IPv4 tip konfiguracije

en: IPv4 Local Network/s
bs: IPv4 Lokalna Mreža/e

en: IPv4 Local network(s)
bs: IPv4 lokalna mreža(e)

en: IPv4 Only
bs: Samo IPv4

en: IPv4 Remote Network/s
bs: IPv4 udaljene mreža/e

en: IPv4 Remote network(s)
bs: IPv4 Udaljena mreža(e)

en: IPv4 Routes
bs: IPv4 rute

en: IPv4 Tunnel Network
bs: IPv4 tunnel mreža

en: IPv4 Tunnel network
bs: IPv4 tunnel mreža

en: IPv4 address
bs: IPv4 adresa

en: IPv4 address %s is being used by or overlaps with:
bs: IPv4 adresa %s je već korištena ili se preklapa sa:

en: IPv4 address of Tunnel Peer
bs: IPv4 adresa tunnel peera

en: IPv4 addresses can not be used in IPv6 rules (except within an alias).
bs: IPv4 adrese ne mogu biti korištene u IPv6 pravilima (osim u aliasu).

en: IPv4 and IPv6 addresses can not be used in rules that apply to both IPv4 and IPv6 (except within an alias).
bs: IPv4 i IPv6 adrese ne mogu biti korištene u pravilima koja se primjenjuju i za IPv4 i IPv6 (osim u aliasu).

en: IPv4 bit mask must be blank or numeric value between 1 and 32.
bs: IPv4 bit maska mora biti prazna ili numerička vrijednost između 1 i 32

en: IPv4 mask bits%1$s%2$s
bs: IPv4 mask bitovi%1$s%2$s

en: IPv4 networks that will be accessible from the remote endpoint. Expressed as a comma-separated list of one or more CIDR ranges. This may be left blank if not adding a route to the local network through this tunnel on the remote machine. This is generally set to the LAN network.
bs: IPv4 mreže koje će biti dostupne sa udaljene krajnje tačke. Izraženo kao zarezom razdvojena lista jednog ili više CIDR dometa. Ovo može biti ostavljeno prazno ako ne dodajete rutu ka lokalnoj mreži kroz ovaj tunel na udaljenoj mašini. Ovo je generalno postavljeno za LAN mrežu.

en: IPv4 networks that will be routed through the tunnel, so that a site-to-site VPN can be established without manually changing the routing tables. Expressed as a comma-separated list of one or more CIDR ranges. If this is a site-to-site VPN, enter the remote LAN/s here. May be left blank for non site-to-site VPN.
bs: IPv4 mreže koje će biti preusmjerene kroz tunnel, tako da site-to-site VPN može biti uspostavljen bez ručnog mijenjanja routing tablica. Izraženo kao zarezom razdvojena lista jednog ili više CIDR dometa. Ako je ovaj site-to-site VPN, unesite udaljene LAN/ove ovdje. Može biti ostavljeno prazno za bez site-to-site VPNa.

en: IPv4 or IPv6 address of the authoritative DNS server for this domain. e.g.: 192.168.100.100%1$sTo use a non-default port for communication, append an '@' with the port number.
bs: IPv4 ili IPv6 adresa autoritativnog DNS servera za ovu domenu. npr: 192.168.100.100%1$sDa koristi ne zadani port za komunikaciju, dodaj '@' sa port brojem.

en: IPv4 or IPv6 address to be returned for the host%1$se.g.: 192.168.100.100 or fd00:abcd::1
bs: IPv4 ili IPv6 adresa da bude vraćena za host%1$snpr.: 192.168.100.100 ili fd00:abcd::1

en: IPv4 with ICMPv6 is not valid.
bs: IPv4 sa ICMPv6 nije validno.

en: IPv6 Address
bs: IPv6 adresa

en: IPv6 Configuration Type
bs: IPv6 tip konfiguracije

en: IPv6 DNS entry
bs: IPv6 DNS unos

en: IPv6 Local Network/s
bs: IPv6 Lokalna Mreža/e

en: IPv6 Local network(s)
bs: IPv6 lokalna mreža(e)

en: IPv6 Network
bs: IPv6 mreža

en: IPv6 Only
bs: Samo IPv6

en: IPv6 Options
bs: IPv6 Opcije

en: IPv6 Prefix
bs: IPv6 prefiks

en: IPv6 Remote Network/s
bs: IPv6 udaljena mreža/e

en: IPv6 Remote network(s)
bs: IPv6 udaljena mreža(e)

en: IPv6 Routes
bs: IPv6 rute

en: IPv6 Tunnel Network
bs: IPv6 Tunnel mreža

en: IPv6 address
bs: IPv6 adresa

en: IPv6 address %s is being used by or overlaps with:
bs: IPv6 adresa %s se već koristi ili se preklapa sa:

en: IPv6 address ranges are not supported (%s)
bs: IPv6 domet adresa nije podržan (%s)

en: IPv6 addresses cannot be used in IPv4 rules (except within an alias).
bs: IPv6 adrese ne mogu biti korištene u IPv4 pravilima (osim u aliasu).

en: IPv6 bit mask must be blank or numeric value between 1 and 128.
bs: IPv6 bit maska mora biti prazna ili numerička vrijednost između 1 i 128

en: IPv6 does not work for RADIUS authentication, see Bug #4154.
bs: IPv6 ne radi za RADIUS autentikaciju, pogledajte Bug #4154.

en: IPv6 link local addresses cannot be configured as an interface IP.
bs: IPv6 lokalne link adrese ne mogu biti konfigurisane kao interface IP.

en: IPv6 mask bits%1$s%2$s
bs: IPv6 mask bitovi%1$s%2$s

en: IPv6 networks that will be accessible from the remote endpoint. Expressed as a comma-separated list of one or more IP/PREFIX. This may be left blank if not adding a route to the local network through this tunnel on the remote machine. This is generally set to the LAN network.
bs: IPv4 mreže koje će biti dostupne sa udaljene krajnje tačke. Izraženo kao zarezom razdvojena lista jednog ili više IP/PREFIX-a. Ovo može biti ostavljeno prazno ako ne dodajete rutu ka lokalnoj mreži kroz ovaj tunel na udaljenoj mašini. Ovo je generalno postavljeno za LAN mrežu.

en: IPv6 over IPv4 Tunneling
bs: IPv6 više od IPv4 tuneliranja

en: IPv6 subnets are not supported in host aliases (%s)
bs: IPv6 subneti nisu podržani u host aliasima (%s)

en: IPv6 will use the IPv4 connectivity link (PPPoE)
bs: IPv6 će koristiti IPv4 link za konekciju (PPPoE)

en: IPv6 with ARP is not valid.
bs: IPv6 sa ARP nije validno.

en: IPv6 with ICMP is not valid.
bs: IPv6 sa ICMP nije validno.

en: Ident
bs: ident

en: Identifier
bs: Identifikator

en: Identity Association Statement
bs: Iskaz asocijacije identiteta

en: Idle Timeout
bs: Timeout odsustva

en: Idle time accounting
bs: Računanje odsutnog vremena

en: Idle time left: %s
bs: Preostalo odsutno vrijeme: %s

en: Idle time: %s
bs: Odsutno vrijeme: %s

en: Idle timeout
bs: Timeout kod odsustva

en: Idle timeout (Minutes)
bs: Timeout odsutnosti (u minutama)

en: Idle timeout (seconds)
bs: Timeout kod odstustva (sekunde)

en: Idle timeout value
bs: Vrijednost odsutnog timeouta

en: If "source" or "destination" slots is chosen a dynamic pipe with the bandwidth, delay, packet loss and queue size given above will be created for each source/destination IP address encountered, respectively. This makes it possible to easily specify bandwidth limits per host.
bs: Ako "source" ili "destination" slotovi su izabrani kao dinamička cijev sa atributima propusnosti, kašnjenja, gubitka paketa i veličine reda date iznad, tada će biti kreiran za svaku source/destinacijsku IP adresu na koju se naiđe, respektivno. Zbog ovog je moguće lako identificirati propusnost limita po hostu.

en: If IPv4 or IPv6 is forced and a hostname is used that does not contain a result using that protocol, it will result in an error. For example if IPv4 is forced and a hostname is used that only returns an AAAA IPv6 IP address, it will not work.
bs: Ako IPv4 ili IPv6 je forsiran i hostname je korišten koji ne sadrži rezultat korištenjem tog protokola, dobit ćemo grešku. Naprimjer ako IPv4 je forsiran i korištenje hostname koji vraća samo AAAA IPv6 IP adresu, neće funckionisati.

en: If NAT/BINAT is required on this network specify the address to be translated
bs: Ako je neophodan NAT/BINAT na ovoj mreži, specificirajte adresu koja će biti translirana.

en: If RADIUS type is set to Cisco, in Access-Requests the value of Calling-Station-ID will be set to the client's IP address and the Called-Station-Id to the client's MAC address. Default behavior is Calling-Station-Id = client's MAC address and Called-Station-ID = pfSense's WAN IP address.
bs: Ako je RADIUS tip postavljenna Cisco, zahtjevi pristupa traže vrijednost Calling-Station IDa i bit će postavljeni na klijentovu IP adresu i Called-Station-Id na klijentovu MAC adresu. Zadano ponašanje je Calling-Station-Id = klijentova MAC adresa i Called-Station-ID = pfSenseova WAN IP adresa.

en: If Synchronize States is enabled this interface will be used for communication.%1$sIt is recommended to set this to an interface other than LAN! A dedicated interface works the best.%1$sAn IP must be defined on each machine participating in this failover group.%1$sAn IP must be assigned to the interface on any participating sync nodes.
bs: Ako Sinhroniziranje stanja je uključeno na ovom interfejsu, biti će korišteno za kounikaciju. %1$sPreporučeno je postaviti ovo nekom interfejsu koji nije tipa LAN! Dodijeljeni interfejs njbolje funkcioniše. %1$sIP mora biti definisan na svakoj mašini koja sudjeljuje u ovoj failover grupi. %1$sIP mora biti dodijeljen interfejsu na bilo kojem čvoru sinhronizacije koji sudjeluje.

en: If TCP flags that should be set is specified, then out of which flags should be specified as well.
bs: Ako TCP naznačava da bi trebalo biti specificirano ako je zadano, onda svaka od svih naznaka mora biti isto.

en: If VLANs will not be used, or only for optional interfaces, it is typical to
    say no here and use the webConfigurator to configure VLANs later, if required.
bs: Ako se VLANovi neće koristiti, ili samo za pojedine interfaceove, tipično je reći ne ovdje i koristiti webConfigurator za konfiguraciju VLANova kasnije, po potrebi.

en: If a 1:1 NAT entry is added for any of the interface IPs on this system, it will make this system inaccessible on that IP address. i.e. if the WAN IP address is used, any services on this system (IPsec, OpenVPN server, etc.) using the WAN IP address will no longer function.
bs: Ako je 1:1 NAT unos dodan za bilo koji interface IPova na ovom sistemu, učinit će ovaj sistem nedostupnim za tu IP adresu tj. ako je WAN IP adresa korištena, svi servisi na ovom sistemu (IPsec, OpenVPN server itd.) koji koriste WAN IP neće više funkcionisati.

en: If a LAN interface's IPv6 configuration is set to Track, and the tracked interface loses connectivity, it can cause connections to this firewall that were established via hostname to fail. This can happen unintentionally when accessing the firewall by hostname, since by default both IPv4 and IPv6 entries are added to the system's DNS. Enabling this option prevents those IPv6 records from being created.
bs: Ako LAN interfaceova IPv6 konfiguracija je postavljena na Prati, i praćeni interface izgubi konekciju, to može uzrokovati da konekcije koje su uspostavljene sa ovim firewallom preko hostnamea da ne uspiju. Ovo se može desiti nenamjerno kada se pristupa firewallu preko hostnamea, jer zadano i IPv4 i IPv6 unosi su dodani sistemskom DNSu. Uključivanjem ove opcije sprječavamo kreiranje takvih IPv6 unosa.

en: If a client includes a unique identifier in its DHCP request, that UID will not be recorded in its lease.
bs: Ako klijent uključuje jedinstveni identifikator u svom DHCP zahtjevu, taj UID neće biti snimljen u posudbi.

en: If a mac allow list is specified, it must contain only valid partial MAC addresses.
bs: Ako je mac pristup specificiran, mora sadržavati samo parcijalnu MAC adresu/e.

en: If a mac deny list is specified, it must contain only valid partial MAC addresses.
bs: Ako je mac lista odbijanja specificirana, mora sadržavati samo parcijalnu MAC adresu/e.

en: If a single IP is picked, remote syslog servers must all be of that IP type. To mix IPv4 and IPv6 remote syslog servers, bind to all interfaces.
bs: Ako je jedan IP odabran, udaljeni syslog serveri moraju biti takvog tipa IPa. Da pomiješate IPv4 i IPv6 udaljene syslog servere, dodijelite svim interfejsima.

en: If a target address other than an interface's IP address is used, then depending on the way the WAN connection is setup, a %1$sVirtual IP%2$s may also be required.
bs: Ako je tražena adresa osim IP adrese interfacea korištena, tada u ovisnosti od načina postavke WAN konekcije, %1$sVirtuelni IP%2$s može biti potreban.

en: If a value is entered in this field, then MSS clamping for TCP connections to the value entered above minus 40 (TCP/IP header size) will be in effect.
bs: Ako je neka vrijednost unesena u ovo polje, onda MSS clamping za TCP konekcije za unesene vrijednosti minus 40 (veličina headera TCP/IP) će imati efekta.

en: If additional pools of addresses are needed inside of this subnet outside the above Range, they may be specified here.
bs: Ako dodatni poolovi adresa su potrebni unutar ovog subneta izvan dometa "iznad", oni mogu biti specificirani ovdje.

en: If an IPv4 address is entered, the address must be outside of the pool.%1$sIf no IPv4 address is given, one will be dynamically allocated from the pool.
bs: Ako je IPv4 adresa unesena, adresa mora biti izvan poola. %1$sAko nijedna IPv4 adresa nije data, jedna će biti dinamički alocirana iz poola.

en: If an IPv6 address is entered, the address must be outside of the pool.%1$sIf no IPv6 address is given, one will be dynamically allocated from the pool.
bs: Ako je IPv6 adresa unesena, mora biti izvan poola. %1$sAko niti jedna IPv6 adresa nije data, jedna će biti dinamički alocirana iz poola.

en: If an alias cannot be resolved (e.g. because it was deleted), the corresponding element (e.g. filter/NAT/shaper rule) will be considered invalid and skipped.
bs: Ako alias ne može biti nađen (npr. jer je obrisan), odgovarajući element (filter/NAT/shaper pravilo) će biti smatran pogrešnim i biti će preskočeno.

en: If automatic outbound NAT is selected, a mapping is automatically generated for each interface's subnet (except WAN-type connections) and the rules on the "Mappings" section of this page are ignored.
bs: Ako je selektovan automatski vanopsežni NAT, mapiranje se automatski generiše za svaki subnet interfacea (osim WAN konekcija) i pravila u sekciji "Mapiranja" su ignorisana.

en: If disable outbound NAT is selected, no rules will be used.
bs: Ako je isključivi NAT selektovan, niti jedno pravilo neće biti korišteno.

en: If done so, this file must be terminated with a blank line (e.g. new line)
bs: Ako je tako određeno, ovaj fajl mora biti okončan novim redom.

en: If enabled no attempts will be made to ensure that the MAC address of clients stays the same while they are logged in. This is required when the MAC address of the client cannot be determined (usually because there are routers between pfSense and the clients). If this is enabled, RADIUS MAC authentication cannot be used.
bs: Ako je uključeno nijedan pokušaj se neće desiti da se utvrdi da MAC adresa klijenata ostaje ista dok su prijavljeni. Ovo je potrebno kada se MAC adrese klijenata ne mogu odrediti (često jer postoje ruteri između pfSensea i klijenata). Ako je ovo uključeno, RADIUS MAC autentikacija ne može biti korištena.

en: If enabled only the most recent login per username will be active. Subsequent logins will cause machines previously logged in with the same username to be disconnected.
bs: Ako je uključeno, samo će posljednji login po usernameu biti aktivan. Višestruki logini će uzrokovati da mašine koje su prethodno bile prijavljene sa istim imenom da se diskonektuju.

en: If enabled with the automatically MAC passthrough entry created, the username used during authentication will be saved. To remove the passthrough MAC entry either log in and remove it manually from the %1$sMAC tab%2$s or send a POST from another system.
bs: Ako je uključeno sa automatskim MAC unos prolazom, korisničko ime korišteno za autentikaciju će biti spašeno. Da uklonite automatski MAC prolaz prijavite se ponovo i uklonite ga ručno sa %1$s MAC tab%2$s ili pošaljite POST sa drugog sistema.

en: If enabled, a popup window will appear when clients are allowed through the captive portal. This allows clients to explicitly disconnect themselves before the idle or hard timeout occurs.
bs: Ako je uključeno, popup prozor će se pojaviti kada je klijentima dozvoljen prolaz kroz zabranjeni portal. Ovo dozvoljava klijentima da se eksplicitno diskonektuju sami prije nego nastupi hard timeout ili prođe period odsustva.

en: If enabled, a total number of unwanted replies is kept track of in every thread. When it reaches the threshold, a defensive action is taken and a warning is printed to the log file. This defensive action is to clear the RRSet and message caches, hopefully flushing away any poison. The default is disabled, but if enabled a value of 10 million is suggested.
bs: Ako je uključeno, ukupan broj neželjenih odgovora se prati u svakom threadu. Kada dođe do praga, vrši se odbrambena akcija i upozorenje se ispisuje u log fajl. Ova odbrambena akcija je da se očisti RRset i poruke keša nadajući se da će otkloniti svaku opasnost. Po zadanom je ovo isključeno, ali ako je uključeno, kao zadana vrijednost se preporučuje 10 miliona.

en: If enabled, the waiting period is reset to the original duration if access is attempted when all pass-through credits have already been exhausted.
bs: Ako je uključeno, period čekanja je vraćen na originalno trajanje ako je pokušan pristup kada su svi pass-through krediti već iskorišteni.

en: If entered these servers will be given to all PPPoE clients, otherwise LAN DNS and one WAN DNS will go to all clients.
bs: Ako je uneseno, ovi serveri će biti dati svim PPPoE klijentima, inače LAN DNS i jedan WAN DNS će ići svim klijentima.

en: If hybrid outbound NAT is selected, mappings specified on this page will be used, followed by the automatically generated ones.
bs: Ako je hibridni vanopsežni NAT selektovan, mapiranja specificirana na ovoj stranici će biti korištena praćena sa onim koji su automatski generisani.

en: If manual outbound NAT is selected, outbound NAT rules will not be automatically generated and only the mappings specified on this page will be used.
bs: Ako je ručni vanopsežni NAT selektovan, vanopsežna NAT pravila neće biti automatski generisana i samo mapiranja specificirana na ovoj stranici će biti korištena.

en: If more than one bandwidth configured all schedules need to be selected.
bs: Ako je konfigurisano više od jedne propusnosti tada svi rasporedi moraju biti selektovani.

en: If no Client Certificate is selected, a username and/or password must be entered.
bs: Ako nijedan klijent certifikat nije selektovan, korisničko ime i/ili lozinka moraju biti uneseni.

en: If no certificates are defined, one may be defined here: %1$sSystem &gt; Cert. Manager%2$s
bs: Ako nijedan certifikat nije definisan, on može biti definisan ovdje: %1$s Sistem &gt; Upravitelj certifikatima%2$s

en: If no incoming or outgoing packets are transmitted for the entered number of seconds the connection is brought down. When the idle timeout occurs, if the dial-on-demand option is enabled, mpd goes back into dial-on-demand mode. Otherwise, the interface is brought down and all associated routes removed.
bs: Ako nijedan dolazeći ili odlazeći paket nije premješten u unesenom broju sekundi, konekcija se gasi. Gada se timeout odsustva pojavi, dial-on-demand opcija se uključuje, mpd se vraća u dial-on-demand način rada. U suprotnom, interface se gasi i sve njegove rute se uklanjaju.

en: If no qualifying outgoing packets are transmitted for the specified number of seconds, the connection is brought down. An idle timeout of zero disables this feature.
bs: Ako nijedan kvalificirani odlazeći paket nije poslan u specificiranom broju sekundi, konekcija se prekida. Timeout kod odsustva isključuje ovu opciju.

en: If possible do not add items to this file manually.
bs: Ako je moguće, ne dodaji iteme na ovaj fajl ručno.

en: If present, ignores requests from this user to write config.xml.
bs: Ako je prisutno, ignorira sve zahtjeve ovog korisnika za pisanje config.xml

en: If primary server fails all requests will be sent via backup server.
bs: Ako primarni server ne uspije, svi zahtjevi će biti poslani backup serveru.

en: If reauthentication is enabled, Access-Requests will be sent to the RADIUS server for each user that is logged in every minute. If an Access-Reject is received for a user, that user is disconnected from the captive portal immediately. Reauthentication requires user credentials to be cached in the captive portal database while a user is logged in; The cached credentials are necessary for the portal to perform automatic reauthentication requests.
bs: Ako je reautentikacija uključena, zahtjevi za pristup će biti poslani RADIUS serveru za svakog korisnika koji se prijavi svake minute. Ako je zahtjev za pristup primljen za nekog korisnika, taj korisnik se isključuje sa zabranjenog portala istog trenutka. Reautentikacija zahtijeva da se korisnički podaci kešuju u bazu podataka zabranjenog portala dok je korisnik prijavljen; Kešovani podaci su neophodni za djelovanje portala te vršenje automatskih zahtjeva za reautentikaciju.

en: If selected, clicking a label in the left column will select/toggle the first item of the group.
bs: Ako je označeno, klikanje na oznaku u lijevoj koloni će odabrati prvi predmet grupe.

en: If selected, lists of interfaces will be sorted by description, otherwise they are listed wan,lan,optn...
bs: Ako odabrano, lista interfaceova će biti sortirana po opisu, inače će biti sortirani wan,lan,optn...

en: If selected, the details in alias popups will not be shown, just the alias description (e.g. in Firewall Rules).
bs: Ako je označeno, detalji u alias popupima neće biti prikazani, već samo opis aliasa (vidi firewall pravila).

en: If such data is absent, the zone becomes bogus. If Disabled and no DNSSEC data is received, then the zone is made insecure.
bs: Ako su ovakvi podaci odsutno, zona postaje prividna. Ako je isključeno i nikakvi DNSSEC podaci nisu dobijeni, tada zona nije sigurna.

en: If the DNS Resolver is enabled, the DHCP service (if enabled) will automatically serve the LAN IP address as a DNS server to DHCP clients so they will use the DNS Resolver. If Forwarding is enabled, the DNS Resolver will use the DNS servers entered in %1$sSystem &gt; General Setup%2$s or those obtained via DHCP or PPP on WAN if &quot;Allow DNS server list to be overridden by DHCP/PPP on WAN&quot; is checked.
bs: Ako je DNS resolver uključen, DHCP servis (ako je uključen) će automatski služiti kao LAN IP adresa za DNS server ka DHCP klijentima koji će koristiti DNS resolver. Ako je forwardanje uključeno, DNS resolver će koristiti DNS servere unesene u %1$sSistem &gt; Generalne postavke%2$s ili one koji su dobijeni preko DHCP ili PPP na WANu ako &quot;Dozvoli DNS server listi da bude overrideana preko DHCP/PPP na WANu&quot; je odabrano.

en: If the DNS forwarder is enabled, the DHCP service (if enabled) will automatically serve the LAN IP address as a DNS server to DHCP clients so they will use the forwarder.
bs: Ako je DNS forwarder uključen, DHCP servis (ako je uključen) će automatski služiti kao LAN IP adresa DNS serveru prema DHCP klijentima koji će biti korišteni za forwarder.

en: If the default gateway goes down, switch the default gateway to another available one. This is not enabled by default, as it's unnecessary in most all scenarios, which instead use gateway groups.
bs: Ako zadani gateway padne, promijeni zadani gateway na drugi dostupni. Ovo nije uključeno kao zadano, jer je nepotrebno u mnogim situacijama koje inače koriste gateway grupe.

en: If the graph cannot be seen, the %1$sAdobe SVG viewer%2$s may need to be installed
bs: Ako graf ne može biti viđen, %1$sAdobe SVG viewer%2$s bi trebao biti instaliran

en: If the host can be accessed using multiple names, then enter any other names for the host which should also be overridden.
bs: Hostu se može pristupiti koristeći više imena, onda unesite bilo koje drugo ime za koje host bi trebao biti overridean.

en: If the interface IP address is private the public IP address will be fetched and used instead.
bs: Ako IP adresa ovog interfacea je privatna, javna IP adresa će biti preuzeta i korištena umjesto prvobitne.

en: If the interface IP is private, attempt to fetch and use the public IP instead.
bs: Ako IP interfejsa je privatan, pokušaj uzeti i koristiti javni IP.

en: If there are custom options that override the management features of OpenVPN on a client or server, they will cause that OpenVPN instance to not work correctly with this status page.
bs: Ako postoje posebne opcije koje overrideaju svojstva upravljanja OpenVPNa na klijentu ili serveru, koji će uzrokovati da OpenVPN instanca neće raditi sa statusnom stranicom.

en: If this CSR will be signed using the Certificate Manager on this firewall, set the attributes when signing instead as they cannot be carried over.
bs: Ako će ovaj CSR biti potpisan korišteći Certifikat Manadžer na ovom firewallu, postavite atribute kad radite potpisivanje inače oni ne mogu biti preneseni.

en: If this field is blank, the adapter's default MTU will be used. This is typically 1500 bytes but can vary in some circumstances.
bs: Ako je ovo polje prazno, adapterski zadani MTU će se koristiti. Ovo je obično 1500 bajta ali može varirati u nekim slučajevima.

en: If this interface is an Internet connection, select an existing Gateway from the list or add a new one using the "Add" button.%1$sOn local area network interfaces the upstream gateway should be "none". Gateways can be managed by %2$sclicking here%3$s.
bs: Ako ovaj interface je internet konekcija, odaberi već postojeći Gateway iz liste ili dodaj novi koristeći "dodaj" dugme. %1$sNa lokalnim mrežama interfejsi upstream gatewaya bi trebali biti "none". Gejtveji se mogu upravljati %2$s klikanjem ovdje %3$s.

en: If this interface is an Internet connection, select an existing Gateway from the list or add a new one using the "Add" button.%sOn local LANs the upstream gateway should be "none".
bs: Ako ovaj interface je internet konekcija, odaberi već postojeći Gateway iz liste ili dodaj novi koristeći "dodaj" dugme.%sNa lokalnim LANovima upstream gateway bi trebao biti "none".

en: If this is checked, errors from the nginx web server process for the GUI or Captive Portal will appear in the system log.
bs: Ako je ova opcija odabrana, greške za nginx web server procesa za GUI ili Sigurnosni Portal će se pojaviti u sistemskom logu.

en: If this is checked, errors from the web server process for the GUI or Captive Portal will appear in the main system log.
bs: Ako je ova opcija selektovana, greške sa procesa web servera za GUI ili zabranjeni portal će se pojaviti u glavnom sistemskom logu.

en: If this is checked, filter logs are shown as generated by the packet filter, without any formatting. This will reveal more detailed information, but it is more difficult to read.
bs: Ako je ovo odabrano, filter logovi su generisani kao filter paketa, bez ikakvog formatiranja. Ovo će otkriti detaljnije informacije, ali je teže za čitati.

en: If this is checked, the DHCP relay will append the circuit ID (%s interface number) and the agent ID to the DHCP request.
bs: Ako je ovo označeno, DHCP relej će dodavati circuit ID (%s broj interfacea) i agent ID na DHCP zahtjev.

en: If this is checked, the DHCPv6 relay will append the circuit ID (%s interface number) and the agent ID to the DHCPv6 request.
bs: Ako je ova opcija odabrana, DHCPv6 relej će dodati circuit ID (%s broj interfacea) i agent ID na DHCPv6 zahtjev.

en: If this option is enabled, the captive portal will try to authenticate users by sending their MAC address as the username and the password entered below to the RADIUS server.
bs: Ako je ova opcija uključena, zabranjeni portal će pokušati da autentikuje korisnike slanjem njihove MAC adrese kao korisničkog imena i lozinke unesene ispod RADIUS serveru.

en: If this option is not set, all NetBIOS-over-TCP/IP options (including WINS) will be disabled.
bs: Ako ova opcija nije postavljena, svi NetBIOS-preko-TCP/IP opcija (uključujući WINS) će biti isključeni.

en: If this option is not set, all NetBIOS-over-TCP/IP options (including WINS) will be disabled.
bs: Ako ova opcija nije postavljena, postavi NetBIOS-preko-TCP/IP opcije (uključujući WINS) će biti isključeno.

en: If this option is set %1$s DNS Forwarder (dnsmasq) will query the DNS servers sequentially in the order specified (%2$sSystem - General Setup - DNS Servers%3$s), rather than all at once in parallel.
bs: Ako je ova opcija postavljena %1$s DNS forwarder(dnsmasq) će slati upite DNS serverima sekvencijalno u redu specificiranom u (%2$sSistem - Generalne postavke - DNS serveri %3$s), i imat će viši prioritet nego svi paralelno.

en: If this option is set %s DNS Forwarder (dnsmasq) will not forward A or AAAA queries for plain names, without dots or domain parts, to upstream name servers.	 If the name is not known from /etc/hosts or DHCP then a "not found" answer is returned.
bs: Ako je ova opcija postavljena %s DNS forwarder (dnsmasq) neće proslijediti A ili AAAA upite za obična imena, bez tačaka ili dijelova domene, ka upstream imenima servera. Ako ime nije poznato već iz /etc/hosts ili iz DHCPa onda je vraćen odgovor "nije nađeno".

en: If this option is set %s DNS Forwarder (dnsmasq) will not forward reverse DNS lookups (PTR) for private addresses (RFC 1918) to upstream name servers.  Any entries in the Domain Overrides section forwarding private "n.n.n.in-addr.arpa" names to a specific server are still forwarded. If the IP to name is not known from /etc/hosts, DHCP or a specific domain override then a "not found" answer is immediately returned.
bs: Ako je ova opcija postavljena %s DNS forwarder (dnsmasq) neće proslijediti obrnuta DNS traženja (PTR) za privatne adrese (RFC 1918) ka upstream imenima servera. Svi unosi u sekciji domain overrideova koji forwarduju privatno "n.n.n.in-addr.arpa" imena ka specifičnom serveru se još uvijek forwardaju. Ako IP od ime nije poznato iz /etc/hosts, DHCP ili specifičnog domain overridea, tada je vraćen odgovor "nije nađeno".

en: If this option is set DHCP mappings will be resolved before the manual list of names below. This only affects the name given for a reverse lookup (PTR).
bs: Ako je ova opcija postavljena DHCP mapiranja će biti nađena prije manualne liste imena ispod. Ovo će samo uticati za ime dato za obrnuto traženje (PTR).

en: If this option is set machines that specify their hostname when requesting a DHCP lease will be registered in the DNS forwarder, so that their name can be resolved. The domain in %1$sSystem: General Setup%2$s should also be set to the proper value.
bs: Ako je ova opcija uključena za uređaje koji specificiraju hostname pri traženju DHCP posudbe biti će registrovani u DNS forwarderu, tako da se njihovo ime može naći. Domena u %1$sSistem: generalne postavke%2$s bi također trebao biti stavljen na korektnu vrijednost.

en: If this option is set, %s will use DNS servers assigned by a DHCP/PPP server on WAN for its own purposes (including the DNS Forwarder/DNS Resolver). However, they will not be assigned to DHCP clients.
bs: Ako je ova opcija uključena, %s će koristiti DNS servere koji su dodijeljeni DHCP/PPP serveru na WANu za sopstvene potrebe (uključujući DNS Forwarder/DNS Resolver). Kako god, neće biti dodijeljeni DHCP klijentima.

en: If this option is set, DHCP static mappings will be registered in the DNS forwarder, so that their name can be resolved. The domain in %1$sSystem: General Setup%2$s should also be set to the proper value.
bs: Ako je ova opcija postavljena, DHCP statička mapiranja će biti registrovana u DNS forwarderu, tako da njihovo ime može biti nađeno. Domena u %1$sSistem: Generalne postavke%2$s trebao bi biti postavljen na korektnu vrijednost.

en: If this option is set, DNS queries will be forwarded to the upstream DNS servers defined under %1$sSystem &gt; General Setup%2$s or those obtained via DHCP/PPP on WAN (if DNS Server Override is enabled there).
bs: Ako je ova opcija postavljena, DNS upiti će biti proslijeđeni ka upstream DNS serverima definisanim u %1$sSistem &gt; Generalne postavke%2$s ili onima koji su dobijeni sa DHCP/PPP na WANu(ako DNS server override je uključen).

en: If this option is set, attempts to connect to SSL/HTTPS (Port 443) sites will not be forwarded to the captive portal. This prevents certificate errors from being presented to the user even if HTTPS logins are enabled. Users must attempt a connecton to an HTTP (Port 80) site to get forwarded to the captive portal. If HTTPS logins are enabled, the user will be redirected to the HTTPS login page.
bs: Ako je ova opcija uključena, pokušava konekciju SSL/HTTPS (port 443) te stranice neće biti forwardane zabranjenom portalu. Ovo sprječava greške certifikata da se prikažu korisniku čak iako su HTTPS logini uključeni. Korisnici moraju pokušati konekciju ka HTTP (port 80) stranici da budu forwardani zabranjenom portalu. Ako su HTTPS logini uključeni, korisnik će biti redirektan HTTPS login stranici.

en: If this option is set, the DNS forwarder will only bind to the interfaces containing the IP addresses selected above, rather than binding to all interfaces and discarding queries to other addresses.%1$sThis option does NOT work with IPv6. If set, dnsmasq will not bind to IPv6 addresses.
bs: Ako je ova opcija postavljena, DNS forwarder će biti dodijeljen samo za interfaceove koji sadrže IP adrese označene iznad, prije nego će biti dodijeljen svim interfaceima i upitima koji se odbacuju za druge adrese. %1$sOva opcija NE funkcioniše sa IPv6. Ako je postavljena, dnsmasq neće biti dodijeljen IPv6 adresama.

en: If this option is set, the captive portal will restrict each user who logs in to the specified default bandwidth. RADIUS can override the default settings. Leave empty for no limit.
bs: Ako je ova opcija postavljena, zabranjeni portal će zabraniti pristup svakom korisniku koji se prijavi za specificiranu propusnost. RADIUS može overrideati zadane postavke. Ostavite prazno za ponašanje bez ograničenja.

en: If this option is set, then DHCP static mappings will be registered in the DNS Resolver, so that their name can be resolved. The domain in %1$sSystem &gt; General Setup%2$s should also be set to the proper value.
bs: Ako je ova opcija postavljena, tada DHCP statička mapiranja će biti registrovana u DNS resolveru, tako da njihovo ime može biti nađeno. Domena u %1$sSistem &gt; Generalne postavke%2$s bi također trebala biti stavljena na pravu vrijednost.

en: If this option is set, then machines that specify their hostname when requesting a DHCP lease will be registered in the DNS Resolver, so that their name can be resolved. The domain in %1$sSystem &gt; General Setup%2$s should also be set to the proper value.
bs: Ako je ova opcija postavljena, uređaji koji specificiraju kada zahtijevaju DHCP posudbu će biti registrovani u DNS resolveru, tako da njihovo ime može biti nađeno. Domena u %1$sSistem &gt; Generalne postavke%2$s bi također trebala biti stavljena na pravu vrijednost.

en: Ignore
bs: Ignoriši

en: Ignore BOOTP queries
bs: Ignoriši BOOTP upite

en: Ignore Denied Clients may not be used when a Failover Peer IP is defined.
bs: Ignoriši odbijene klijente koji se ne bi trebali koristiti kada Failover Peer IP je definisan.

en: Ignore client identifiers
bs: Ignoriši klijent identifikatore

en: Ignore denied clients
bs: Ignoriši odbijene klijente

en: Ignoring IPsec reload since there are no tunnels on interface %s
bs: Ignorišem IPsec reload jer nema tunnela na interfaceu %s

en: Illegal Input: Self-Explanatory
bs: Nepravilan ulaz: dovoljno objašnjeno

en: Import
bs: Importuj

en: Import Certificate
bs: Uvezi certifikat

en: Import RRD has %1$s DS values and %2$s RRA databases, new format RRD has %3$s DS values and %4$s RRA databases
bs: Import RRD ima %1$s vrijednosti i %2$s RRA baze podataka, novi format RRD ima %3$s DS vrijednosti i %4$s RRA baza podataka.

en: Import an existing Certificate
bs: Uvezi već postojeći certifikat

en: Import an existing Certificate Authority
bs: Uvezi već postojeći Autoritativni Certifikat

en: Import an existing Certificate Revocation List
bs: Uvezi već postojeću listu ukinutih certifikata

en: Imported a firewall alias.
bs: Importovan firewall alias.

en: Imported m0n0wall configuration
bs: Importovana m0n0wall konfiguracija

en: In
bs: U

en: In / Out pipe
bs: U/Iz cijev

en: In Authentication mode the TLS key is used only as HMAC authentication for the control channel, protecting the peers from unauthorized connections. %1$sEncryption and Authentication mode also encrypts control channel communication, providing more privacy and traffic control channel obfuscation.
bs: U autentikacijskom načinu rada TLS ključ je korišten samo kao HMAC autentikacija za kontrolni kanal, štiteći peerove od neautorizovane konekcije. %1$sEnkripcijski i autentikacijski način također enkriptuju kontrolu komunikacije kanala, tako da daju više privatnosti i kontrole prometa.

en: In Use
bs: Koristi se

en: In addition, .php files can also be uploaded for execution.	The filename can be passed to the custom page from the initial page by using text similar to:
bs: U dodatku, .php fajlovi mogu biti uploadani za izvršavanje. Filename može biti proslijeđen poebnoj stranici sa inicijalne stranice koristeći tekst sličan:

en: In and Out Queue cannot be the same.
bs: U i Iz redovi ne mogu biti isti.

en: In most cases this option is not required.
bs: U većini slučajeva ova opcija nije potrebna.

en: In most cases, the field should be left empty. All packets in this pipe are placed into a fixed-size queue first, then they are delayed by value specified in the Delay field, and then they are delivered to their destination.
bs: U većini slučajeva, ovo polje bi trebalo ostaviti praznim. Svi paketi u pipeu se smještaju u red fiksne veličine te se odgađaju sa vrijednošću specificiranom u polju Kašnjenje i tek onda se šalju na svoju destinaciju.

en: In most cases, this field should be left empty. It increases the hash size set
bs: U većini slučajeva ovo polje bi trebalo ostaviti praznim. Povećava veličinu heš skupa.

en: In most cases, this field should be left empty. It increases the hash size set.
bs: U većini slučajeva, ovo polje bi trebalo ostaviti praznim. Povećava veličinu heš skupa.

en: In most cases, zero (0) should be specified here (or leave the field empty). A value of 0.001 means one packet in 1000 gets dropped
bs: U većini slučajeva, nula (0) bi trebala biti specificirana ovdje (ili ostaviti polje praznim). Vrijednost 0.001 znači da se gubi jedan paket u 1000.

en: In most cases, zero (0) should be specified here (or leave the field empty). A value of 0.001 means one packet in 1000 gets dropped.
bs: U većini slučajeva, nula (0) bi trebala biti specificirana (ili ostaviti prazno polje). Vrijednost 0.001 znači da se izgubi jedan paket od 1000.

en: In most cases, zero (0) should specified here (or leave the field empty).
bs: U većini slučajeva, nula (0) bi trebala biti specificirana (ili ostaviti prazno polje).

en: In-use DHCP Pool Ranges:
bs: DHCP pool dometi koji se koriste:

en: In/out errors
bs: U/Od greške

en: In/out packets
bs: U/Od paketi

en: In/out packets (block)
bs: U/Od paketi (blokiraj)

en: In/out packets (pass)
bs: U/Od paketi (prolaz)

en: Inactive Tunnels
bs: Neaktivni tuneli

en: Include %s is missing!
bs: Include %s nije pronađen!

en: Include file %s could not be found for inclusion.
bs: Include fajl %s nije pronađen i ne može se iskoristiti.

en: Include idle time in session time
bs: Uključi odsutno vrijeme u vremenu sesije

en: Incoming TCP Buffers
bs: Dolazeći TCP baferi

en: Incomplete ARP entries indicate that the target host has not yet replied to an ARP request.
bs: Nedovršeni ARP unosi pokazuju da ciljani host još uvijek nije odgovorio na ARP zahtjev.

en: Incorrect format for source-hash key, "0x" must be followed by exactly 32 hexadecimal characters.
bs: Netačan format za izvorni heš ključ, "0x" mora biti praćeno sa tačno 32 heksadecimalna znaka.

en: Incorrect ip address specified for username %s
bs: Pogrešna IP adresa specificirana za korisničko ime %s

en: Indicates whether the user is able to login for example via SSH.
bs: Pokazuje da li je korisnik u mogućnosti da se prijavi za primjer preko SSH.

en: Indicates whether the user is able to login for tunneling via SSH when they have no shell access. Note: User - System - Copy files (scp) and System: Copy files to home directory (chrooted scp) conflict with this privilege.
bs: Pokazuje da li je korisnik u stanju da se prijavi za tuneliranje koristeći SSH kada nemaju pristup shellu.

en: Indicates whether the user is able to login on the captive portal.
bs: Pokazuje da li je korisnik u stanju da se prijavi na zarobljeni portal

en: Indicates whether the user is allowed to dial in via IPsec xauth (Note: Does not allow shell access, but may allow the user to create SSH tunnels)
bs: Pokazuje da li je korisniku dozvoljeno da spaja preko IPsec xauth (Napomena: Nije dozvoljen shell pristup, ali može biti dozvoljeno korisniku da stvara SSH tunele)

en: Indicates whether the user is allowed to dial in via L2TP
bs: Pokazuje da li je korisnik u mogućnosti da spaja preko L2TP

en: Indicates whether the user is allowed to dial in via PPPOE
bs: Pokazuje da li je korisnik u mogućnosti da spaja preko PPPOE

en: Indicates whether this user is able to login for example via SSH.
bs: Pokazuje da li je ovaj korisnik u mogućnosti da se prijavi preko SSH (za primjer).

en: Indicates whether this user is allowed to copy files onto the %s appliance via SCP/SFTP.
bs: Pokazuje da li je ovaj korisnik ovlašten da kopira fajlove na %s uređaje koristeći SCP/SFTP

en: Indicates whether this user is allowed to copy files to the home directory via SCP/SFTP.Note: User - System - Copy files (scp) conflicts with this privilege.Warning: Manual chroot setup required, see /usr/local/etc/rc.d/scponlyc.
bs: Pokazuje da li je ovaj korisnik u mogućnosti da kopira fajlove na home direktorij preko SCP/SFTP. Napomena: Korisnik - Sistem - Kopiraj fajlove (scp) je u konfliktu/preklapanju sa ovom privilegijom. Upozorenje: Ručno postavljanje chroot je neophodno, pogledaj /usr/local/etc/rc.d/scponlyc.

en: Indicates whether this user will lock access to the webConfigurator for other users.
bs: Pokazuje da li će ovaj korisnik zaključati/zabraniti pristup webConfigurator-u za ostale korisnike.

en: Indicates whether this user will lock individual HTML pages after having accessed a particular page (the lock will be freed if the user leaves or saves the page form).
bs: Pokazuje da li će ovaj korisnik zaključati individualne HTML stranice nakon pristupanja određenoj stranici (zabrana će biti uklonjena kada korisnik napusti ili spasi formu stranice).

en: Indoor
bs: Unutra

en: Info
bs: Informacije

en: Info type
bs: Tip informacija

en: Inform
bs: Informiši

en: Inform Deny
bs: Informiši i odbij

en: Information
bs: Informacija

en: Information & Tests
bs: Informacije & Testovi

en: Information only
bs: Samo informacije

en: Information reply
bs: Informativni odgovor

en: Information request
bs: Informativni zahtjev

en: Infrastructure (BSS)
bs: Infrastruktura (BSS)

en: Inherited from
bs: Naslijeđeno od

en: Initial Template
bs: Inicijalni predložak

en: Initial interval
bs: Inicijalni interval

en: Initial update.
bs: Inicijalno ažuriranje.

en: Initializing
bs: Inicijalizacija

en: Initializing Service
bs: Inicijalizacija usluga

en: Initiate IKEv2 reauthentication with a make-before-break
bs: Iniciraj IKEv2 reautentikaciju sa make-before-break

en: Insert a stronger ID into IP header of packets passing through the filter.
bs: Ubaci jači ID u IP naslov paketa koji prolaze kroz filter.

en: Insert consumer into mirror
bs: Ubaci korisnika u mirror

en: Install: %1$s seconds (%2$s)
bs: Instaliraj: %1$s sekundi (%2$s)

en: Installation Feedback
bs: Instalacijski feedback

en: Installation aborted.
bs: Instalacija prekinuta

en: Installed %s package.
bs: Instaliran %s paket

en: Installed 15 minute filter reload for Time Based Rules
bs: Instaliran petnaestominutni filter za ponovno učitavanje vremenskih pravila

en: Installed Files
bs: Instalirani fajlovi

en: Installed Packages
bs: Instalirani paketi

en: Installing configuration ....
bs: Instaliranje konfiguracije ....

en: Installing configuration...
bs: Instaliranje konfiguracije...

en: Installing partial NAT reflection rules. Maximum 1,000 reached.
bs: Instaliranje parcijalnih NAT pravila. Maksimalnih 1000 dostignuto.

en: Instead of a break-before-make scheme. Make-before-break uses overlapping IKE and CHILD_SA during reauthentication by first recreating all new SAs before deleting the old ones. This behavior can be beneficial to avoid connectivity gaps during reauthentication, but requires support for overlapping SAs by the peer.
bs: Umjesto break-before-make načina. Make-before-break koristi preklapanje IKE i CHILD_SA tokom reautentikacije tako što prvo rekreira sve nove SAove prije brisanja starih. Ovo ponašanje može biti korisno za izbjegavanje razmaka u konektivnosti tokom reautentikacije, ali zahtijeva podršku za preklapajućim SAovima od peera.

en: Integrity Verifier
bs: Verifikacija integriteta

en: Integrity checker
bs: Provjera integriteta

en: Intel Core* CPU on-die thermal sensor
bs: Intel Core* CPU on-die termalni senzor

en: Inter-client communication
bs: Među-klijentna komunikacija

en: Interface %1$s configured via %2$s type %3$s
bs: Interface %1$s konfigurisan preko %2$s tipom %3$s

en: Interface %1$s tracking non-existent interface %2$s
bs: Interface %1$s prati nepostojeći interface %2$s

en: Interface %s (VLAN) has MTU set to a larger value.
bs: Interface %s (VLAN) ima MTU postavljen na veću vrijednost.

en: Interface %s Dynamic Gateway
bs: Interface %s Dinamički gateway

en: Interface %s Static Gateway
bs: Interface %s Statični gateway

en: Interface %s changed to adhoc mode
bs: Interface %s prebačen na adhoc način

en: Interface %s changed to hostap mode
bs: Interface %s prebačen na hostap način.

en: Interface %s changed to infrastructure mode
bs: Interface %s prebačen na infrastrukturni način

en: Interface Address
bs: Adresa interfacea

en: Interface Assignments
bs: Zadani interfejsi

en: Interface Binding
bs: Dodjela interfaceova

en: Interface Group Configuration
bs: Konfiguracija grupnog interfacea

en: Interface Groups
bs: Interfejs grupe

en: Interface Groups allow setting up rules for multiple interfaces without duplicating the rules.%sIf members are removed from an interface group, the group rules are no longer applicable to that interface.
bs: Interfejs grupe dozvoljavaju postavljanje više interfaceova bez dupliranja pravila. %sAko su članovi uklonjeni iz interface grupe, grupna pravila više nisu primjenjiva za taj interface.

en: Interface IPs used by the DNS Forwarder for responding to queries from clients. If an interface has both IPv4 and IPv6 IPs, both are used. Queries to other interface IPs not selected below are discarded. The default behavior is to respond to queries on every available IPv4 and IPv6 address.
bs: Interfejsi IPovi korišteni za DNS forwarder za odgovaranje na upite klijenata. Ako interface ima i IPv4 i IPv6 IPove, oba se koriste. Upiti za druge IPove interfaceova koji nisu selektovani će biti odbačeni. Zadano ponašanje je da se odgovori na upite za svaku IPv4 i IPv6 adresu.

en: Interface IPs used by the DNS Resolver for responding to queries from clients. If an interface has both IPv4 and IPv6 IPs, both are used. Queries to other interface IPs not selected below are discarded. The default behavior is to respond to queries on every available IPv4 and IPv6 address.
bs: Interface IPovi korišteni za DNS resolver za odgovaranje na upite klijenata. Ako interface ima i IPv4 i IPv6 IPovi, oba će biti korištena. Upiti ka drugim interface IPovima koji nisu selektovani ispod će biti odbijeni. Zadano ponašanje je da se odgovori na upite na svaku IPv4 i IPv6 adresu.

en: Interface Statistics
bs: Statistika interfejsa

en: Interface has been added.
bs: Interface je dodan.

en: Interface has been deleted.
bs: Interface je obrisan.

en: Interface mismatch detected. Please resolve the mismatch, save and then click 'Apply Changes'. The firewall will reboot afterwards.
bs: Neslaganje u interfaceima detektovano. Molimo riješite problem, spasite i kliknite 'Primijenite promjene'. Ovaj firewall će se ponovo pokrenuti nakon ovog.

en: Interface specified for the virtual IP address %s does not exist. Skipping this VIP.
bs: Interface specificiran za virtualnu IP adresu %s ne postoji. Preskačem ovaj VIP.

en: Interface supplied as member (%s) is invalid
bs: Interface dat kao član (%s) je pogrešan.

en: Interface supplied as member is invalid
bs: Interface dat kao član je pogrešan

en: Interface supplied as parent is invalid
bs: Interface koji je dat kao roditelj je pogrešan

en: Interface(s)/Port(s)
bs: Interface(ovi)/Port(ovi)

en: Interfaces
bs: Interfejsi

en: Interfaces Sort
bs: Sortiranje interfejsa

en: Interfaces participating in the bridge.
bs: Interfejsi koji učestvuju u bridgeu

en: Interfaces that are configured as members of a lagg(4) interface will not be shown.
bs: Interfejsi koji su konfigurisani kao članovi lagg(4) interface neće biti prikazani.

en: Interfaces without an IP address will not be shown.
bs: Interfejsi bez IP adrese neće biti prikazani.

en: Interfaces without an IP address will not be shown.%1$sSelecting no interfaces will listen on all interfaces with a wildcard.%1$sSelecting all interfaces will explicitly listen on only the interfaces/IPs specified.
bs: Interfejsi bez IP adrese neće biti prikazani. %1$sAko ne odaberete niti jedan interface pratit će se saobraćaj na svim interfejsima sa wildcardom.%1$sBiranje svih interfaceova znači da će se eksplicitno pratiti promet na svim specificiranim interfejsima/IPovima.

en: Interfaces without an IPv6 address will not be shown.
bs: Interfejsi bez IPv6 adrese neće biti prikazani.

en: Intermediate config write during package install for %s.
bs: Srednji config piše tokom instaliranja paketa za %s

en: Intermediate config write during package removal for %s.
bs: Napredno konfiguracijsko pisanje prilikom brisanja paketa za %s

en: Internal
bs: Interno

en: Internal (LAN) ULA IPv6 Prefix for the Network Prefix translation. The prefix size specified for the internal IPv6 prefix will be applied to the external prefix.
bs: Interni (LAN) ULA IPv6 prefiks za prenošenje prefiksa mreže. Prefiksna veličina specificirana za interni IPv6 prefiks će biti primijenjen za vanjski/eksterni prefiks.

en: Internal Certificate
bs: Interni certifikat

en: Internal Certificate Authority
bs: Interni Autoritativni Certifikat

en: Internal Certificate Revocation List
bs: Interna lista ukinutih certifikata

en: Internal IP
bs: Interni IP

en: Internal IPv6 prefix
bs: Interni IPv6 prefiks

en: Internal prefix
bs: Interni prefiks

en: Interval must be a numeric value
bs: Interval mora biti numerička vrijednost

en: Interval, in seconds, that will be used to resolve hostnames configured on aliases. %1$sNote:	 Leave this blank for the default (300s).
bs: Interval u sekundama, koji će biti korišten za razrješavanje hostnameova koji su konfigurisani na aliasima. %1$sNapomena: Ostavite prazno za zadanu vrijednost (300s).

en: Invalid Backup Count specified
bs: Nevaljan brojač vraćanja koji je specificiran

en: Invalid CRL reference.
bs: Nevaljana CRL referenca.

en: Invalid Credentials! Don't forget to use API Key for password field with CloudFlare.
bs: Pogrešni podaci! Ne zaboravite koristiti API ključ za lozinku vezanu za CloudFlare.

en: Invalid DHCP pool %1$s - %2$s for %3$s subnet %4$s/%5$s detected. Please correct the settings in Services, DHCP Server
bs: Pogrešan DHCP izbor %1$s - %2$s za %3$s subnet %4$s/%5$s detektovano. Molimo ispravite postavke u Servisi, DHCP Server

en: Invalid ICMP subtype: %s can not be used with %s.
bs: Pogrešan ICMP subtip: %s ne može biti korišteno sa %s.

en: Invalid IP. IP Address submitted is improperly formatted or is a private IP address or is on a blacklist.
bs: Pogrešan IP. Odabrana IP adresa nije propisno formatirana ili je privatna IP adresa, ili je na crnoj listi.

en: Invalid Local Network.
bs: Nevaljana lokalna mreža

en: Invalid OS detection selection. Please select a valid OS.
bs: Pogrešna OS selekcija detekcije. Molimo odaberite validan OS.

en: Invalid Password.
bs: Pogrešna lozinka.

en: Invalid SIM CS State
bs: Pogrešno CIM CS stanje

en: Invalid SIM CS/PS State
bs: Pogrešno SIM CS/PS stanje

en: Invalid SIM PS State
bs: Pogrešno SIM PS stanje

en: Invalid SIM/locked State
bs: Pogrešan SIM/zaključano stanje

en: Invalid TTL
bs: Pogrešan TTL

en: Invalid Username.
bs: Pogrešno korisničko ime.

en: Invalid ZoneID
bs: Pogrešan ZoneID

en: Invalid action specified.
bs: Pogrešna radnja specificirana

en: Invalid address family.
bs: Pogrešna familija adresa.

en: Invalid channel specified.
bs: Pogrešan kanal specificiran

en: Invalid character '#' in SNMP trap string
bs: Pogrešan karakter '#' u SNMP trap stringu

en: Invalid character '#' in read community string
bs: Pogrešan karakter '#' u čitanju stringa zajednice

en: Invalid character '#' in system contact
bs: Pogrešan karakter '#' u sistemskom kontaktu

en: Invalid character '#' in system location
bs: Pogrešan karakter '#' u sistemskoj lokaciji

en: Invalid characters detected %s. Please remove invalid characters and save again.
bs: Pogrešni znakovi detektovani %s. Molimo uklonite ih pa spasite ponovo.

en: Invalid characters detected (%s).  Please remove invalid characters and save again.
bs: Pogrešni znakovi detektovani (%s). Molimo uklonite ih pa spasite ponovo.

en: Invalid custom options
bs: Pogrešne svojstvene opcije

en: Invalid expiration date format; use MM/DD/YYYY instead.
bs: Pogrešan format datuma isteka; koristi MM/DD/YYYY umjesto postojećeg formatiranja.

en: Invalid info type, bailing.
bs: Pogrešan tip informacija, izlazim.

en: Invalid interface "%s" in interface_dhcp_configure()
bs: Pogrešan interface "%s" u interface_dhcp_configure()

en: Invalid interface for block rule:
bs: Pogrešan interface za pravilo blokiranja:

en: Invalid interface for pass rule:
bs: Pogrešan interface za pass pravilo

en: Invalid interface.
bs: Pogrešan interface.

en: Invalid internal Certificate Authority
bs: Pogrešan autoritet internog certifikata

en: Invalid log type, bailing.
bs: Pogrešan log tip, izlazim.

en: Invalid login (%s).
bs: Pogrešna prijava (%s).

en: Invalid monitor chosen.
bs: Pogrešan monitor izabran.

en: Invalid option chosen for OFDM Protection Mode
bs: Pogrešna opcija izabrana za OFDM način zaštite.

en: Invalid password entered.  Please try again.
bs: Unesen pogrešan password. Molimo pokušajte ponovo.

en: Invalid password.
bs: Pogrešna lozinka.

en: Invalid path %s specified.
bs: Pogrešna putanja %s je navedena.

en: Invalid path specified.
bs: Nevaljana putanja specificirana.

en: Invalid protocol for pass rule:
bs: Pogrešan protokol za pass pravilo:

en: Invalid protocol.
bs: Pogrešan protokol

en: Invalid start time - '%s'
bs: Pogrešno početno vrijeme - '%s'

en: Invalid stop time - '%s'
bs: Pogrešno vrijeme zaustavljanja -'%s'

en: Invalid test type, bailing.
bs: Pogrešan test tip, izlazim.

en: Invalid username or password
bs: Pogrešno korisničko ime ili lozinka

en: Invalid username or password.
bs: Pogrešno korisničko ime ili lozinka.

en: Invalid value specified for packet count.
bs: Pogrešna vrijednost specificirana za brojač paketa.

en: Invalid value specified for packet length.
bs: Pogrešna vrijednost specificirana za dužinu paketa.

en: Invalid value specified for port.
bs: Pogrešna vrijednost specificirana za port.

en: Invalid voucher message
bs: Pogrešna vaučer poruka

en: Inverse
bs: Obrnuto

en: Invert Acct-Input-Octets and Acct-Output-Octets
bs: Obrni Acct-Input-Octete i Acct-Output-Octete

en: Invert match.
bs: Obrni poklapanje.

en: Invert the sense of the destination match.
bs: Obrni smisao destinacijskog poklapanja

en: Invert the sense of the match.
bs: Izvrni smisao poklapanja

en: Issue IP Addresses via RADIUS server.
bs: IP adrese preko RADIUS servera.

en: Issuer
bs: Izdavaoc

en: It is not required to activate DHCPv6 server on pfSense when set to "Managed", "Assisted" or "Stateless DHCP", it can be another host on the network.
bs: Nije potrebno da aktivirate DHCPv6 server na pfSenseu kada je postavljen na "Managed", "Assisted" ili "Stateless DHCP" može biti drugi host na mreži.

en: Item
bs: Predmet

en: January
bs: Januar

en: Jitter
bs: Nervozno

en: Job Processing
bs: Procesiranje posla

en: Jostle Timeout
bs: Timeout izguravanja

en: July
bs: Juli

en: June
bs: Juni

en: Just delete the crash report and return to the Dashboard
bs: Samo obriši izvještaj o krahiranju i vrati se na kontrolnu tablu

en: Keep
bs: Zadrži

en: Keep Configuration
bs: Zadrži konfiguraciju

en: Keep graphs updated on inactive tab. (increases cpu usage)
bs: Ostavi grafove ažurirane na tabu inactive (povećava iskorištenost cpu).

en: Kernel Interface
bs: Interface kernela

en: Key
bs: Ključ

en: Key Rotation must be an integer between 1 and 9999.
bs: Rotacija ključa mora biti cijeli broj između 1 i 9999.

en: Key Type
bs: Tip ključa

en: Key data
bs: Ključni podatak

en: Key data field should be blank, or a valid x509 private key
bs: Polje ključni podatak treba biti prazno, ili validan x509 privatni ključ.

en: Key length
bs: Dužina ključa

en: Key name
bs: Ime ključa

en: KeyID tag
bs: KeyID oznaka

en: Keyinfo statement
bs: Keyinfo iskaz

en: Keys
bs: Ključevi

en: Kill States
bs: Uništi stanja

en: Kill client connection from %s
bs: Prekini konekciju sa %s

en: Kill filtered states
bs: Uništi filtrirana stanja

en: L2TP Logins
bs: L2TP prijave

en: L2TP Service
bs: L2TP servis

en: L2TP Users
bs: L2TP Korisnici

en: L2TP VPN configuration changed.
bs: L2TP VPN konfiguracija promijenjena.

en: L2TP clients
bs: L2TP klijenti

en: L2TP password
bs: L2TP lozinka

en: L2TP remote IP address
bs: L2TP udaljena IP adresa

en: L2TP username
bs: L2TP korisničko ime

en: LAGG Configuration
bs: LAGG Konfiguracija

en: LAGG Interfaces
bs: LAGG interfejsi

en: LAGG Ports
bs: LAGG Portovi

en: LAGG Protocol
bs: LAGG Protokol

en: LAGGs
bs: LAGGovi

en: LAN IP address will be reset to 192.168.1.1
bs: LAN IP adresa će biti vraćena na 192.168.1.1

en: LDAP Server
bs: LDAP server

en: LDAP Server Settings
bs: LDAP server postavke

en: LDAP Server uses RFC 2307 style group membership
bs: LDAP server koristi RFC 2307 stil grupnog članstva

en: LDAP containers
bs: LDAP kontejneri

en: LDAP settings
bs: LDAP postavke

en: LDAP: Could not lookup CA by reference for host %s.
bs: LDAP: Nemoguće pronaći CA po referenci za host %s.

en: LZ4 Compression [compress lz4]
bs: LZ4 kompresija [compress lz4]

en: LZ4 Comression v2 [compress lz4-v2]
bs: LZ4 kompresija v2 [compress lz4-v2]

en: LZO Compression [Legacy style, comp-lzo yes]
bs: LZO kompresija [Legacy style, comp-lzo yes]

en: LZO Compression [compress lzo, equivalent to comp-lzo yes for compatibility]
bs: LZO kompresija [compress lzo, ekvivalent za comp-lzo da za kompatibilnost]

en: Lagg protocol
bs: Lagg protokol

en: Last %1$d %2$s Log Entries.
bs: Posljednji %1$d %2$s Log unosi.

en: Last %1$s %2$s Log Entries
bs: Posljednjih %1$s %2$s Log Unosi

en: Last %1$s %2$s Log Entries.
bs: Posljednji %1$s %2$s Log unosi.

en: Last 1, 5 and 15 minutes
bs: Posljednja 1, 5 i 15 minuta.

en: Last Config Change
bs: Posljednja promjena konfiguracije

en: Last Used
bs: Posljednje korišteno

en: Last activity
bs: Posljednja aktivnost

en: Last capture
bs: Zadnji snimak

en: Last checked
bs: Zadnji put provjereno

en: Last config change
bs: Posljednja promjena konfiguracije

en: Last known config found and restored.  Please double check the configuration file for accuracy.
bs: Posljednja poznata konfiguracija pronađena i vraćena. Molimo vas provjerite još jednom konfiguracijski fajl zbog preciznosti.

en: Last: %s
bs: Posljednji: %s

en: Latency
bs: Latentnost

en: Latency thresholds
bs: Latentna odstupanja

en: Latest Base System
bs: Zadnji bazni sistem

en: Layer 7 shaping is no longer supported. Its configuration has been removed.
bs: Sloj 7 oblikovanje više nije podžano. Njegova konfiguracija je uklonjena.

en: Leap seconds
bs: Prestupne sekunde

en: Lease Requirements and Requests
bs: Zahtjevi i potrebe posudbe

en: Lease Type
bs: Tip posudbe

en: Lease time in seconds. Used for clients that do not ask for a specific expiration time. %1$sThe default is 7200 seconds.
bs: Vrijeme posudbe u sekundama. Koristi se za klijente koji ne traže specifično vrijeme isteka. %1$sZadano je 7200 sekundi.

en: Leases
bs: Posudbe

en: Leases in Use
bs: Posudbe koje se koriste

en: Leave Persistent CARP Maintenance Mode
bs: Izađi iz perzistentnog CARP načina održavanja

en: Leave as 'default' to use the system routing table. Or choose a gateway to utilize policy based routing.
bs: Ostavi kao 'zadano' za korištenje sistemske routing tablice. Ili odaberite gateway za korištenje routiranja temeljenog na pravilima.

en: Leave as 'none' to leave the rule enabled all the time.
bs: Ostavi kao 'nista' za ostavljanje pravila uključenim sve vrijeme.

en: Leave blank if the account shouldn't expire, otherwise enter the expiration date as MM/DD/YYYY
bs: Ostavite prazno ako akaunt ne bi trebao isteći, inače unesite datum isteka kao MM/DD/YYYY

en: Leave blank to disable dynamic DNS registration. Enter the dynamic DNS domain which will be used to register client names in the DNS server.
bs: Ostavite prazno da isključite dinamičku DNS registraciju. Unesite dinamičku DNS domenu koja će biti korištena za registriranje klijent imena u DNS serveru.

en: Leave blank to disable dynamic DNS registration.%1$sEnter the dynamic DNS domain which will be used to register client names in the DNS server.
bs: Ostavite prazno da bi isključili dinamičku DNS registraciju. %1$sUnesite dinamički DNS domen koji će biti korišten za registraciju klijent imena u DNS serveru.

en: Leave blank to disable. Enter a full URI for the LDAP server in the form ldap://ldap.example.com/dc=example,dc=com
bs: Ostavite prazno za isključivanje. Unesite full URI za LDAP server u formi ldap://ldap.example.com/dc=example,dc=com

en: Leave blank to disable. Enter a full hostname or IP for the TFTP server.
bs: Ostavite prazno da isključite. Unesite puno host ime ili IP za TFTP server.

en: Leave blank to disable. Enter a valid IP address, hostname or URL for the TFTP server.
bs: Ostavite prazno za isključivanje. Unesite validnu IP adresu, hostname ili URL za TFTP server.

en: Leave blank to disable. Enter the interface IP address of the other machine. Machines must be using CARP. Interface's advskew determines whether the DHCPd process is Primary or Secondary. Ensure one machine's advskew &lt; 20 (and the other is &gt; 20).
bs: Ostavite prazno da isključite. Unesite IP adresu interfacea druge mašine. Mašine moraju koristiti CARP. Interfaceov advskew određuje da li je DHCPd proces primaran ili sekundaran. Pobrinite se da advskew jedne mašine je  &lt; 20 (i druge je &gt; 20).

en: Leave blank to use the default port (1813).
bs: Ostavite prazno da koristite zadani port (1813).

en: Leave blank to use the system default DNS servers, this interface's IP if DNS forwarder is enabled, or the servers configured on the "General" page.
bs: Ostavite prazno da koristite sistemski zadane DNS servere, IP ovog interfacea ako je DNS forwarder uključen, ili servere konfigurisane na stranici "Generalno".

en: Leave blank to use the system default DNS servers: this interface's IP if DNS Forwarder or Resolver is enabled, otherwise the servers configured on the System / General Setup page.
bs: Ostavite prazno da koristite sistemski zadane DNS servere: interfaceov IP ako je DNS forwarder ili resolver uključen, inače serveri su konfigurisani na način kao na stranici sistem / generalne postavke.

en: Leave empty when no password is needed
bs: Ostavite prazno kada lozinka nije potrebna

en: Leave empty when no user name is needed
bs: Ostavite prazno kada korisničko ime nije potrebno

en: Leave the date field empty, for the reset to be executed each day at the time specified by the minutes and hour fields
bs: Ostavi polje za datum prazno, da se resetovanje vrši svakog dana u vrijeme specificirano u poljima minute i sati.

en: Leaving the date field empty will cause the reset to be executed each day at the time specified in the minutes and hour fields.
bs: Ostavljanje ovog polja praznim će uzrokovati reset da se vrši svaki dan u specificirano vrijeme.

en: Left Column Labels
bs: Oznake lijeve kolone

en: Legend: wireless standards - channel # (frequency @ max TX power / TX power allowed in reg. domain) %1$sNot all channels may be supported by some cards.  Auto may override the wireless standard selected above.
bs: Legenda: wireless standardi  kanal # (frekvencija @ max TX snaga / TX snaga dozvoljena u registriranom domenu) %1$sNe mogu svi kanali biti podržani nekim karticama. Automatski način može overrideati wireless standarde napisane iznad

en: Length
bs: Dužina

en: Level
bs: Nivo

en: Level of detail
bs: Nivo detalja

en: License
bs: Licenca

en: Licensed under the Apache License, Version 2.0 (the "License");%1$syou may not use this file except in compliance with the License.%1$sYou may obtain a copy of the License at
bs: Licencirano pod licencom Apachea, verzija 2.0 (the "License");%1$sne morate koristiti ovaj fajl osim u slučaju licenciranja.%1$s možete preuzeti kopiju licence na

en: Life: %1$s seconds (%2$s)
bs: Život: %1$s sekundi (%2$s)

en: Lifetime
bs: Životni vijek

en: Lifetime (Days)
bs: Životni vijek (dani)

en: Limit Outgoing Bandwidth is not compatible with UDP Fast I/O.
bs: Odlazeći protočni limit nije kompatibilan sa UDP Brzim U/I.

en: Limit outgoing bandwidth
bs: Ograniči odlazeći protok

en: Limited Service
bs: Limitirana usluga

en: Limiter Info
bs: Limiteri info

en: Limiter Information
bs: Informacije o limiteru

en: Limiters
bs: Limiteri

en: Limiters can not be used in Floating rules without choosing a direction.
bs: Limiteri ne mogu biti korišteni u Floating pravilima bez korištenja direkcije.

en: Limiters:
bs: Limiteri:

en: Limits the number of concurrent connections to the captive portal HTTP(S) server. This does not set how many users can be logged in to the captive portal, but rather how many connections a single IP can establish to the portal web server.
bs: Limitira broj uzastopnih konekcija zabranjenom portalu HTTP(S) serveru. Ovo ne postavlja koliko korisnika može biti prijavljeno na zabranjeni portal već koliko konekcija jedan IP može uspostaviti sa portal web serverom.

en: Line %s appears to have generated an error, and has been highlighted. The full response is below.
bs: Izgleda da je linija %s generisala grešku i zbog toga je označena. Potpuni odgovor je ispod.

en: Link Interface(s)
bs: Poveži interface(ove)

en: Link Parameters (
bs: Veza parametara (

en: Link Priority
bs: Prioritet veze

en: Link Share
bs: Share linka

en: Link Type
bs: Link Tip

en: Linked rule
bs: Povezano pravilo

en: List of mirrors changed. Old: (%s) New: (%s)
bs: Lista promijenjenih mirrora. Stari: (%s) Novi: (%s)

en: List of partial MAC addresses to allow, comma separated, no spaces, e.g.: 00:00:00,01:E5:FF
bs: Lista parcijalnih MAC adresa za dopust, razdvojene zarezom bez razmaka, npr: 00:00:00,01:E5:FF

en: List of partial MAC addresses to deny access, comma separated, no spaces, e.g.: 00:00:00,01:E5:FF
bs: Lista parcijalnih MAC adresa za odbijanje, razdvojene zarezom bez razmaka, npr: 00:00:00,01:E5:FF

en: Listen Port
bs: Port praćenja

en: Listen on All interfaces/ip addresses
bs: Slušaj na svim interfejsima / ip adresama

en: Live View
bs: Prikaz uživo

en: Load
bs: Učitaj

en: Load Average
bs: prosjek opterećenosti

en: Load Balance
bs: Balansiranje prometa

en: Load Balancer
bs: Balansiranje Prometa

en: Load Balancer Pools
bs: Balansiranje poolova

en: Load Balancer Status
bs: Balanser prometa status

en: Load Balancer configuration
bs: Balanser prometa konfiguracija

en: Load Balancer: Monitor:
bs: Balanser podataka: Monitor:

en: Load Balancer: Pool:
bs: Balansiranje prometa: pool:

en: Load Balancer: Virtual Server:
bs: Balansiranje prometa: Virtualni server:

en: Load Balancing
bs: Balansiranje opterećenja

en: Load average
bs: Prosjek opterećenosti

en: Load balancing
bs: Balanser učitanog

en: Loading
bs: Učitavanje

en: Loading %s cryptographic accelerator module.
bs: Učitavanje %s kriptografskih akceleratorskih modula.

en: Loading %s thermal monitor module.
bs: Učitavanje %s termalnog monitorskog modula.

en: Loading a directory is not supported.
bs: Učitavanje direktorija nije podržano.

en: Loading filter rules
bs: Učitavanje filter pravila

en: Loading package configuration...
bs: Učitavanje paketskih konfiguracija.

en: Loading package configuration... failed!
bs: Učitavanje paketnih informacija... Nije uspjelo!

en: Loading package instructions...
bs: Učitavanje paketnih instrukcija...

en: Local
bs: Lokalno

en: Local Address
bs: Lokalna adresa

en: Local Database
bs: Lokalna baza podataka

en: Local GRE tunnel endpoint.
bs: Krajnja tačka lokalnog GRE tunnela

en: Local ID
bs: Lokalni ID

en: Local IP
bs: Lokalni IP

en: Local IP Address
bs: Lokalna IP adresa

en: Local IP address
bs: Lokalna IP adresa

en: Local IPv6 peers use %1$sNDP%2$s instead of ARP.
bs: Lokalni IPv6 peerovi koriste %1$sNDP%2$s umjesto ARP.

en: Local Logging
bs: Lokalno logovanje

en: Local Subnet
bs: Lokalni subnet

en: Local User Manager / Vouchers
bs: Lokalni korisnički upravitelj / Vaučeri

en: Local gif tunnel endpoint.
bs: Krajnja tačka lokalnog gif tunnela

en: Local network type
bs: Tip lokalne mreže

en: Local port
bs: Lokalni port

en: Local tunnel IP address
bs: IP adresa lokalnog tunnela

en: Local:
bs: Lokalno:

en: Localization
bs: Lokalizacija

en: Location
bs: Lokacija

en: Log
bs: Izvještaj

en: Log Directory
bs: Log direktorij

en: Log Display Settings Saved (no backup, no sync):
bs: Log postavke spašene (bez backupa, bez sinhronizaacije):

en: Log Display Settings Saved:
bs: Prikaz spašenih log postavki:

en: Log Filter
bs: Log filter

en: Log Level
bs: Log nivo

en: Log Message
bs: Log poruka

en: Log NTP peer statistics (default: disabled).
bs: Log NTP peer statistika (zadano: isključeno).

en: Log clock discipline statistics (default: disabled).
bs: Log disciplina sata statistika (zadano: isključeno).

en: Log errors from the web server process
bs: Log greške sa web server procesa

en: Log file size (Bytes)
bs: Veličina log fajla (u bajtima)

en: Log file size must be numeric and greater than or equal to 100000.
bs: Veličina log fajla mora biti numerička i veća ili jednaka ok 100000.

en: Log file started.
bs: Log file počeo.

en: Log filter
bs: Filter logova

en: Log firewall default blocks
bs: Log firewalla zadana blokiranja

en: Log packets blocked by 'Block Bogon Networks' rules
bs: Log paketi blokirani sa pravilima 'Blokiraj Bogon mreže'

en: Log packets blocked by 'Block Private Networks' rules
bs: Log paketi blokirani sa pravilima 'Blokiraj Privatne Mreže'

en: Log packets matched from the default block rules in the ruleset
bs: Log paketi poklopljeni sa zadanim setom blok pravila u setu pravila.

en: Log packets matched from the default pass rules put in the ruleset
bs: Log paketi poklopljeni sa zadanim pass pravilima stavljenim u set pravila

en: Log packets that are %1$sallowed%2$s by the implicit default pass rule. - Per-rule logging options are still respected.
bs: Log paketi koji su %1$sdozvoljeni%2$s implicitnim zadanim pass pravilom. - Opcije logovanja po pravilu se i dalje poštuju.

en: Log packets that are %1$sblocked%2$s by the implicit default block rule. - Per-rule logging options are still respected.
bs: Log paketi koji su %1$sblokirani%2$s implicitnim zadanim blok pravilom. - Opcije logovanja po pravilu se i dalje poštuju.

en: Log packets that are handled by this rule
bs: Log paketi koji su tretirani ovim pravilom

en: Log peer messages (default: disabled).
bs: Log peer poruke (zadano: isključeno).

en: Log reference clock statistics (default: disabled).
bs: Log referenca sata statistika (zadano: isključeno).

en: Log system messages (default: disabled).
bs: Log sistemske poruke (zadano: isključeno).

en: Log the sub-second fraction of the received time stamp (default: unchecked, not logged).
bs: Log pod-sekundarne frakcije dobivenog time stampa (zadano: nije odabrano, nije logovano).

en: Log type
bs: Tip loga

en: Logged in successfully as %1$s via LDAP server %2$s with DN = %3$s.
bs: Uspješno prijavljen kao %1$s preko LDAP servera %2$s sa DN = %3$s.

en: Logging
bs: Logovanje

en: Login
bs: Prijava

en: Login Banner
bs: Login banner

en: Login page color
bs: Boja login stranice

en: Login to %1$s
bs: Prijava na %1$s

en: Logout
bs: Odjava

en: Logout page contents
bs: Sadržaj logout stranice

en: Logout popup window
bs: Popup prozor za odjavu

en: Logs
bs: Logovi

en: Logs are held in constant-size circular log files. This field controls how large each log file is, and thus how many entries may exist inside the log. By default this is approximately 500KB per log file, and there are nearly 20 such log files.
bs: Logovi se čuvaju u kružnim log fajlovima konstantne veličine. Ovo polje kontroliše koliko je velik svaki log fajl i samim tim koliko unosa može postojati unutar loga. Zadano je ovo aproksimativno 500KB po log fajlu, i postoji skoro 20 takvih log fajla.

en: Long
bs: Dugo

en: Lookup
bs: Traženje

en: Lookup Server IP Address
bs: Adresa traženja server IPa

en: Loss
bs: Gubitak

en: Loss Interval
bs: Interval gubitka

en: Low
bs: Nisko

en: Low and high thresholds for latency in milliseconds. Default is %1$d/%2$d.
bs: Nisko i visoko odstupanje za latentnost u milisekundama. Zadano je %1$d/%2$d.

en: Low and high thresholds for packet loss in %%. Default is %1$d/%2$d.
bs: Nisko i visoko odstupanje gubitka paketa u %%. Zadano je %1$d/%2$d.

en: MAC Address
bs: MAC adresa

en: MAC Allow
bs: MAC dozvoljavanje

en: MAC Deny
bs: MAC odbijanje

en: MAC address
bs: MAC adresa

en: MAC address (6 hex octets separated by colons)
bs: MAC adresa (6 hex octeta razdvojenih dvotačkama)

en: MAC address control
bs: Kontrola MAC adrese

en: MAC address format
bs: Format MAC adrese

en: MAC authentication secret
bs: MAC autentikacijska tajna

en: MAC filtering
bs: MAC filtriranje

en: MACs
bs: MACovi

en: MBUF Usage
bs: MBUF korištenje

en: MONITOR: %1$s has high latency, omitting from routing group %2$s
bs: MONITOR: %1$s ima visoku latenciju(lag), preuzimanje sa routing grupe %2$s

en: MONITOR: %1$s has packet loss, omitting from routing group %2$s
bs: MONITOR: %1$s ima gubitak paketa, preuzimanje sa routing grupe %2$s

en: MONITOR: %1$s is available now, adding to routing group %2$s
bs: MONITOR: %1$s je sada dostupan, dodavanje na routing grupu %2$s

en: MONITOR: %1$s is down, omitting from routing group %2$s
bs: MONITOR: %1$s je pao, preuzimanje sa routing grupe %2$s

en: Magic Packet sent (%1$s) to (%2$s) MAC=%3$s
bs: Magični paket poslan (%1$s) ka (%2$s) MAC=%3$s

en: Magic number
bs: Magic broj

en: Magic number stored in every voucher. Verified during voucher check. Size depends on how many bits are left by Roll+Ticket+Checksum bits. If all bits are used, no magic number will be used and checked.
bs: Magic broj

en: Make Windows 10 Clients Block access to DNS servers except across OpenVPN while connected, forcing clients to use only VPN DNS servers.
bs: Učini Windows 10 klijentski blok da ima pristup DNS serverima osim preko OpenVPN-a kada su spojeni, tako da se forsiraju da koriste samo VPN DNS servere.

en: Make before Break
bs: Stvori prije uništenja

en: Make dynamic DNS registered hostname the same as Hostname above.
bs: Stvori dinamički DNS registrovani hostname isti kao hostname iznad.

en: Make sure all sensitive information is removed! (Passwords, etc.) before posting information from this page in public places (like mailing lists).
bs: Pobrinite se da sve senzitivne informacije uklonite (lozinke itd)! prije postavljanja informacija sa ove stranice na javna mjesta (poput mailing lista).

en: Make sure the certificate is valid for all HTTPS addresses on aliases. If it's not valid or is revoked, do not download it.
bs: Pobrinite se da je certifikat validan za sve HTTPS adrese na aliasima. Ako nije validan ili je oštećen, ne preuzimajte.

en: Manage %1$s Log
bs: Upravljaj %1$s logom

en: Manage Log
bs: Upravljaj logom

en: Manage log
bs: Upravljaj logovima

en: Managed
bs: Zavisno

en: Managed - RA Flags [managed, other stateful], Prefix Flags [onlink, router]
bs: Zauteti - RA oznake [managed, other stateful], Prefiksne oznake [onlink, router]

en: Manual Failover
bs: Ručni failover

en: Manual Outbound NAT Switch
bs: Ručni vanopsežni NAT prekidač

en: Manual Outbound NAT rule generation.%s(AON - Advanced Outbound NAT)
bs: Ručno vanopsežno generisanje NAT pravila. %s(AON - Napredni vanopsežni NAT)

en: Manual failover
bs: Ručni failover

en: Mappings
bs: Mapiranja

en: March
bs: Mart

en: Margintime (Seconds)
bs: Margintime (Sekundi)

en: Mark All as Read
bs: Označi sve kao pročitano

en: Mark Gateway as Down
bs: Obilježi gejtvej kao da ne radi (down)

en: Mark an interface as a "private" interface. A private interface does not forward any traffic to any other port that is also a private interface.
bs: Označi interface kao "privatni" interface. Privatni interface ne forwarda promet na bilo koji drugi port koji je također privatni interface.

en: Mark an interface as a "sticky" interface. Dynamically learned address entries are treated as static once entered into the cache. Sticky entries are never aged out of the cache or replaced, even if the address is seen on a different interface.
bs: Označi interface kao "sticky" interface. Dinamički naučeni adresni unosi su tretirani kao statični kada uđu u keš. Sticky unosi nikad ne zastare i ne zamijene se u kešu, iako je adresa već viđena na drugom interfaceu.

en: Mask
bs: Maska

en: Master Key Regeneration must be an integer between 1 and 9999.
bs: Regeneracija master ključa mora biti cijeli broj između 1 i 9999.

en: Master Key Regeneration must be greater than Key Rotation.
bs: Regeneracija master ključa mora biti veća od rotacije ključa.

en: Match
bs: Spoji

en: Max Processes
bs: Maksimalni procesi

en: Max Processes must be a number 1 or greater
bs: Maksimalni broj procesa mora biti broj veći ili jednak od 1

en: Max bandwidth for queue.
bs: Maksimalna propusnost za red

en: Max failures
bs: Maksimum grešaka

en: Max lease time
bs: Maksimalno vrijeme posudbe

en: Max. connections
bs: Max. konekcija

en: Max. src nodes
bs: Max. src čvorova

en: Max. src. conn. Rate
bs: Max. src. kon. Odnos

en: Max. src. conn. Rates
bs: Max. src. kon. Stope

en: Max. src. states
bs: Max. src. stanja

en: Max. states
bs: Max. stanja

en: Maxaddr needs to be an integer.
bs: Maksimalna adresa mora biti cijeli broj.

en: Maxage needs to be an integer between 6 and 40.
bs: Maksimizacija mora biti cijeli broj između 6 i 40.

en: Maximum
bs: Maksimum

en: Maximum # of States
bs: Maksimalan # stanja

en: Maximum %d
bs: Maksimum %d

en: Maximum MSS
bs: Maksimum MSS

en: Maximum RA interval
bs: Maksimalni RA interval

en: Maximum TTL for RRsets and Messages
bs: Maksimalna vrijednost TTL za RRsetove i Poruke

en: Maximum advertisement interval must be an integer.
bs: Maksimalni interval reklamiranja mora biti cijeli broj.

en: Maximum advertisement interval must be no less than 4 and no greater than 1800.
bs: Maksimalni interval reklamiranja mora biti ne manji od 4 i ne veći od 1800.

en: Maximum concurrent connections
bs: Maksimalan broj uzastopnih konekcija

en: Maximum incoming TCP datagram size
bs: Maksimalna veličina dolazećeg TCP datagrama

en: Maximum lease time
bs: Maksimalno vrijeme posudbe

en: Maximum lease time (Seconds)
bs: Maksimalno vrijeme posudbe (u sekundama)

en: Maximum lease time for clients that ask for a specific expiration time. %1$sThe default is 86400 seconds.
bs: Maksimalno vrijeme posudbe za klijente koji ne traže specifično vrijeme isteka. %1$sZadano je 86400 sekundi.

en: Maximum new connections per host (TCP only).
bs: Maksimum novih konekcija po hostu (TCP samo)

en: Maximum new connections per host / per second(s) (advanced option) must be a positive integer
bs: Maksimum novih konekcija po hostu / po sekundi (napredna opcija) mora biti pozitivan cijeli broj

en: Maximum number of connections to hold in the firewall state table. %1$sNote: Leave this blank for the default. On this system the default size is: %2$d
bs: Maksimalan broj konekcija koje se mogu držati u firewall tablici stanja. %1$sNapomena: Ostavite prazno za zadanu vrijednost. Na ovom sistemu je zadana veličina: %2$d

en: Maximum number of established connections per host (TCP only).
bs: Maksimalan broj uspostavljenih konekcija po hostu (samo TCP).

en: Maximum number of established connections per host (advanced option) must be a positive integer
bs: Maksimalan broj uspostavljenih konekcija po hostu (napredna opcija) mora biti pozitivan cijeli broj

en: Maximum number of hops
bs: Maksimalan broj skokova

en: Maximum number of hops must be between 1 and %s
bs: Maksimalan broj skokova mora biti između 1 i %s

en: Maximum number of old configurations to keep in the cache, 0 for no backups, or leave blank for the default value (%s for the current platform).
bs: Maksimalni broj starih konfiguracija koje se zadržavaju u kešu, 0 za backupe ili ostaviti prazno za zadanu vrijednost (%s za trenutnu platformu).

en: Maximum number of packet fragments to hold for reassembly by scrub rules. Leave this blank for the default (5000)
bs: Maksimalan broj fragmenata paketa za držanje kako bi se ponovo sastavili po scrub pravilima. Ostavite prazno za zadanu vrijednost (5000)

en: Maximum number of pings
bs: Maksimalni broj pingova.

en: Maximum number of table entries for systems such as aliases, sshlockout, snort, etc, combined.%1$sNote: Leave this blank for the default. On this system the default size is: %2$d
bs: Maksimalan broj tabličnih unosa za sisteme kao što su aliasi, sshlockout, snort itd pa i kombinovano. %1$sNapomena: Ostavite prazno za zadanu vrijednost. Na ovom sistemu je zadana veličina: %2$d

en: Maximum number of unique source hosts (advanced option) must be a positive integer
bs: Maksimalan broj jedinstvenih izvornih hostova (napredna opcija) mora biti pozitivan cijeli broj

en: Maximum number of unique source hosts.
bs: Maksimalan broj jedinstvenih izvornih hostova.

en: Maximum outgoing TCP datagram size
bs: Maksimalna veličina odlazećeg TCP datagrama

en: Maximum outgoing UDP datagram size
bs: Maksimalna izlazna veličina UDP datagrama

en: Maximum outgoing bandwidth for this tunnel. Leave empty for no limit. The input value has to be something between 100 bytes/sec and 100 Mbytes/sec (entered as bytes per second). Not compatible with UDP Fast I/O.
bs: Maksimum odlazećeg protoka za ovaj tunnel. Ostavite prazno da bude bez ograničenja. Ulazna vrijednost mora biti nešto između 100 bajta/sek i 100 Mbajta/sek (uneseno kao bajti po sekundi). Nije kompatibilno sa UDP Brzim U/I.

en: Maximum state entries (advanced option) must be a positive integer
bs: Maksimum unosa stanja (napredna opcija) mora biti pozitivan cijeli broj

en: Maximum state entries per host (advanced option) must be a positive integer
bs: Maksimum unosa stanja po hostu (napredna opcija)  mora biti pozitivan cijeli broj

en: Maximum state entries per host.
bs: Maksimum unosa stanja po hostu.

en: Maximum state entries this rule can create.
bs: Maksimum unosa stanja koje ovo pravilo može stvoriti.

en: May
bs: Maj

en: Medium
bs: Srednje

en: Member Count
bs: Broj članova

en: Member Down
bs: Član nije aktivan

en: Member Interfaces
bs: Članovi interfacea

en: Member down
bs: Član nije aktivan

en: Member interfaces
bs: Članovi interfacea

en: Member of
bs: Član je

en: Member(s)
bs: Član(ovi)

en: Members
bs: Članovi

en: Memory Usage
bs: Korištenje memorije

en: Memory usage
bs: Korištenje memorije

en: Menu items...
bs: Stavke menija

en: Merged in config (%s sections) from XMLRPC client.
bs: Spojeno u config (%s sekcije) sa XMLRPC klijenta.

en: Message
bs: Poruka

en: Message Cache Size
bs: Veličina keša poruke

en: Message cache elements are prefetched before they expire to help keep the cache up to date
bs: Poruka keširanih elemenata je dobijena prije nego isteknu da bi se uspješno mogao ažurirati keš

en: Message encoding
bs: Enkodiranje poruke

en: Message sent to %s OK
bs: Poruka poslana %s OK

en: Min bandwidth for queue.
bs: Minimalna propusnost za red

en: Minimal
bs: Minimalno

en: Minimum RA interval
bs: Minimalni RA interval

en: Minimum TTL for RRsets and Messages
bs: Minimalan TTL za RRsetove i poruke

en: Minimum advertisement interval must be an integer.
bs: Minimalni interval reklamiranja mora biti cijeli broj.

en: Minimum advertisement interval must be no greater than 0.75 * Maximum advertisement interval
bs: Minimalan interval reklamiranja mora biti veći od 0.75 * Maksimalni interval reklamiranja

en: Minimum advertisement interval must be no less than 3.
bs: Minimalan interval reklamiranja ne smije biti manji od 3.

en: Minimum wireless standard
bs: Minimalni wireless standard

en: Minutes (0-59)
bs: Minute (0-59)

en: Minutes per ticket
bs: Minute po tiketu

en: Minutes/Ticket
bs: Minute/Ticket

en: Mirror %s consumer count changed from %d to %d.
bs: Mirror %s brojač korisnika promijenjen sa %d na %d.

en: Mirror %s drive status changed. Old: (%s) New: (%s)
bs: Mirror %s status diska promijenjen. Stari: (%s) Novi: (%s)

en: Mirror %s status changed from %s to %s.
bs: Mirror %s status promijenjen iz %s u %s

en: Mirror is not in a COMPLETE state, cannot insert consumer. Forget disconnected disks or wait for rebuild to finish.
bs: Mirror nije KOMPLETNO stanje, nemoguće ubaciti korisnika. Zaboravi diskonektovane diskove ili čekaj da se završi rebuild.

en: Misc
bs: Dodatno

en: Miscellaneous
bs: Razni/Razno

en: Missing SIM State
bs: Nedostatak SIM stanja

en: Missing destination port:
bs: Destinacijski port nije dostupan:

en: Missing parameters for pass rule.
bs: Neki parametri fale za pass pravilo.

en: Mobile
bs: Mobilno

en: Mobile Client
bs: Mobilni klijent

en: Mobile Clients
bs: Mobilni klijenti

en: Mobile Users
bs: Mobilni korisnici

en: Mobile host redirect
bs: Redirekcija na mobilni host

en: Mobile registration reply
bs: Odgovor na mobilnu registraciju

en: Mobile registration request
bs: Zahtjev mobilne registracije

en: Mode
bs: Način

en: Modem Port
bs: Port modema

en: Modifications
bs: Modifikacije

en: Modifying the first level tag of an existing entry is not allowed.
bs: Modifikovanje taga prvog nivoa unosa koji već postoji nije dozvoljeno.

en: Modifying the interface of an existing entry is not allowed.
bs: Modifikovanje interfacea već postojećeg unosa nije dozvoljeno.

en: Mon
bs: Pon

en: Monitor IP
bs: Prati IP

en: Monitoring Settings
bs: Postavke praćenja

en: Monitors
bs: Monitori

en: Month
bs: Mjesec

en: Monthly
bs: Mjesečno

en: Monthly (0 0 1 * *)
bs: Mjesečno(0 0 1 * *)

en: More Information
bs: Više informacija

en: Move checked P2s here
bs: Pomjeri odabrane P2ove ovdje

en: Move checked entries to here
bs: Pomjeri odabrane unose ovdje

en: Move checked rules above this one. Shift+Click to move checked rules below.
bs: Pomjeri označena pravila iznad ovog. Shift+Click da ih pomjerite ispod.

en: Move checked rules below this one. Release shift to move checked rules above.
bs: Pomjerite označena pravila ispod ovog. Pustite shift da ih pomjerite iznad.

en: Move to "Member of" list
bs: Prebaci na listu "Član je"

en: Move to "Members"
bs: Prebaci u "Članovi"

en: Move to "Not member of" list
bs: Prebaci na listu "Nije član"

en: Move to "Not members
bs: Prebaci u "Nisu članovi"

en: Move to disabled list
bs: Pomjeri na listu isključenih

en: Move to enabled list
bs: Pomjeri na listu uključenih

en: Multicast listener done
bs: Multicast slušanje dovršeno

en: Multicast listener query
bs: Multicast slušanje upit

en: Multicast listener report
bs: Multicast slušanje izvještaj

en: Multilink connections (MLPPP) using the PPP link type is not currently supported. Please select only one Link Interface.
bs: Multilink konekcije (MLPPP) koje koriste PPP link tip nisu podržane. Molimo odaberite samo jedan Link Interface.

en: Multiple Lan/Wan
bs: Višestruki Lan/Wan

en: Must match the setting chosen on the remote side.
bs: Mora se poklapati sa postavkama odabranim na udaljenoj strani.

en: Mutual PSK
bs: Zajednički PSK

en: Mutual PSK + Xauth
bs: Zajednički PSK + Xauth

en: Mutual RSA
bs: Zajednički RSA

en: Mutual RSA + Xauth
bs: Zajednički RSA + Xauth

en: My IP address
bs: Moja IP adresa

en: My State
bs: Moj status

en: NAS IP Address
bs: NAS IP adresa

en: NAS IP Address sent to the RADIUS Server
bs: NAS IP adresa poslana RADIUS serveru

en: NAS Identifier
bs: NAS identifikator

en: NAT 1:1 Mappings
bs: NAT 1:1 Mapiranja

en: NAT Address
bs: NAT adresa

en: NAT Port
bs: NAT port

en: NAT Ports
bs: NAT Portovi

en: NAT Reflection mode for port forwards
bs: NAT reflekcijski način za forwardanje portova

en: NAT Traversal
bs: NAT prelaz

en: NAT configuration
bs: NAT konfiguracija

en: NAT reflection
bs: NAT reflekcija

en: NAT/BINAT translation
bs: NAT/BINAT translacija

en: NCP Algorithms
bs: NCP algoritmi

en: NDP Table
bs: NDP tablica

en: NMEA Sentences
bs: NMEA rečenice

en: NOTE:
bs: NAPOMENA:

en: NOTE: If an IP address cannot be located on the chosen interface, the daemon will bind to all addresses.
bs: NAPOMENA: Ako IP adresa ne može biti locirana na traženom interfaceu, daemon će biti dodijeljen svim adresama.

en: NOTE: If left blank, and a default domain is set, it will be used for this value.
bs: NAPOMENA: Ako je ostavljeno prazno, i ako je zadana domena postavljena, biti će korištena za ovu vrijednost.

en: NOTE: It is recommended to use an algorithm stronger than SHA1 when possible
bs: NAPOMENA: Preporučeno je koristiti algoritam jači od SHA1 ako je to moguće

en: NOTE: It is recommended to use an algorithm stronger than SHA1 when possible.
bs: NAPOMENA: Preporučeno je da se koristi jači algoritam od SHA1 kada je moguće.

en: NOTE: Log sizes are changed the next time a log file is cleared or deleted. To immediately increase the size of the log files, first save the options to set the size, then clear all logs using the "Reset Log Files" option farther down this page.
bs: NAPOMENA: Veličine logova su promijenjene svaki put kada se log fajl očisti ili obriše. Da bi odmah povećali veličinu log fajlova, prvo spasite opcije za postavljanje veličine, zatim očistite sve logove koristeći "Resetuj Log Fajlove" opciju ispod na ovoj stranici.

en: NOTE: Rules for WAN type interfaces in groups do not contain the reply-to mechanism upon which Multi-WAN typically relies. %1$sMore Information%2$s
bs: NAPOMENA: Pravila za interfaceove WAN vrste u grupama ne sadrže reply-to mehanizam na koji se Multi-WAN obično oslanja. %1$sViše informacija%2$s

en: NOTE: The following links are to external services, so their reliability cannot be guaranteed.
bs: NAPOMENA: sljedeći linkovi su na eksterne servise tako da njihova pouzdanost nije zagarantovana.

en: NOTE: This does not disable any IPv6 features on the firewall, it only blocks traffic.
bs: Napomena: Ovo ne isključuje bilo kakve IPv6 opcije na firewallu, samo blokira promet.

en: NOTE: When using SSL or STARTTLS, this hostname MUST match the Common Name (CN) of the LDAP server's SSL Certificate.
bs: NAPOMENA: Pri korištenju SSL ili STARTTLS, ovaj hostname MORA da se poklapa sa zajedničkim imenom (CN) LDAP serverovog SSL certifikata.

en: NOTE: With iPhone clients, this does not work when deployed via the iPhone configuration utility, only by manual entry.
bs: NAPOMENA: Sa iPhone klijentima, ovo ne radi kada je predano sa iPhone konfiguracijskom koristi, samo manuelni unos podržan.

en: NPt Mappings
bs: NPt Mapiranja

en: NTP Graphs
bs: NTP Grafovi

en: NTP Serial GPS Configuration
bs: NTP serijska GPS konfiguracija

en: NTP Serial PPS Configuration
bs: NTP serijska PPS konfiguracija

en: NTP Server Configuration
bs: NTP server konfiguracija

en: NTP Server enable
bs: NTP server uključi

en: NTP Servers
bs: NTP Serveri

en: NTP Status
bs: NTP status

en: NTP clock sync
bs: NTP clock sinhronizacija

en: NTP servers
bs: NTP serveri

en: Name
bs: Ime

en: Name of the file that should be loaded when this host boots off of the network, overrides setting on main page.
bs: Ime fajla koji bi se trebao učitati kada ovaj host se boota sa mreže, overrideaju se postavke na glavnoj stranici.

en: Name of the firewall host, without domain part
bs: Ime firewall hosta, bez dijela domene

en: Name of the host, without domain part.
bs: Ime hosta, bez dijela domene

en: Name of the host, without the domain part%1$se.g. enter "myhost" if the full domain name is "myhost.example.com"
bs: Ime hosta, bez domen dijela %1$snpr unesite "myhost" ako je puno ime domene "myhost.example.com"

en: Name of the host, without the domain part%1$se.g.: "myhost"
bs: Ime hosta bez dijela domene%1$snpr: "myhost"

en: Name server
bs: Ime servera

en: Name/Time
bs: Ime/vrijeme

en: Nearby Access Points or Ad-Hoc Peers
bs: Okolne pristupne tačke ili Ad-Hoc peerovi

en: Need at least 2 characters to create vouchers.
bs: Potrebna barem 2 karaktera za stvaranje vaučera

en: Need private RSA key to print vouchers
bs: Potreban privatni RSA ključ za ispisivanje vaučera

en: Negated: This rule excludes NAT from a later rule
bs: Negirano: ovo pravilo isključuje NAT iz kasnijeg pravila

en: Negated: Traffic matching this rule is not translated.
bs: Negirano: Promet koji se poklapa sa ovim pravilom nije preveden.

en: Negating destination address of "any" is invalid.
bs: Negiranje destinacijske adrese "any" je pogresno.

en: Neighbor advertisement
bs: Susjedno reklamiranje

en: Neighbor solicitation
bs: Susjedno posredovanje

en: NetBIOS Options
bs: NetBIOS opcije

en: NetBIOS enable
bs: NetBIOS uključi

en: Netboot filename
bs: Netboot ime fajla

en: Netgate Device ID
bs: Netgate Uređaj ID

en: Netgate Device ID:
bs: Netgate ID uređaja:

en: Network
bs: Mreža

en: Network Address Translation
bs: Prevod mrežnih adresa

en: Network Booting
bs: Bootanje mreže

en: Network Interfaces
bs: Mrežni interfejsi

en: Network List
bs: Lista mreža

en: Network Lock and (U)SIM card Lock State
bs: Zaključavanje mreže i (USIM) stanje zaključavanja kartice

en: Network Lock error Service
bs: Greška mrežnog zaključavanja usluga

en: Network Locked Service
bs: Zaključana mreža usluga

en: Network Time Protocol Events (NTP Daemon, NTP Client)
bs: Mrežno vrijeme protokol eventova (NTP daemon, NTP klijent)

en: Network Time Protocol Status
bs: Status mrežnog vremena protokola

en: Network booting
bs: Network bootanje

en: Network configuration for Virtual Address Pool
bs: Mrežna konfiguracija za pool virtualnih adresa

en: Network configuration for Virtual IPv6 Address Pool
bs: Mrežna konfiguracija za Pool virtualnih IPv6 adresa

en: Network lock State
bs: Stanje zaključavanja mreže

en: Network or FQDN
bs: Mreža ili FQDN

en: Network port
bs: Mrežni port

en: Network(s)
bs: Mreža(e)

en: Network-Specific Wireless Configuration
bs: Specifična mrežna wireless konfiguracija

en: Network/mask
bs: Mreža/maska

en: Networking
bs: Umrežavanje

en: Networks
bs: Mreže

en: Networks are specified in CIDR format. Select the CIDR mask that pertains to each entry. /32 specifies a single IPv4 host, /128 specifies a single IPv6 host, /24 specifies 255.255.255.0, /64 specifies a normal IPv6 network, etc. Hostnames (FQDNs) may also be specified, using a /32 mask for IPv4 or /128 for IPv6. An IP range such as 192.168.1.1-192.168.1.254 may also be entered and a list of CIDR networks will be derived to fill the range.
bs: Mreže su specificirane u CIDR formatu. Odaberite CIDR masku koja odgovara svakom unosu. /32 specificira jedan IPv4 host, /128 specificira jedan IPv6 host, /24 specificira 255.255.255.0, /64 specificira normalnu IPv6 mrežu itd. Host imena (FQDNovi) mogu biti specificirani koristeći /32 masku za IPv4, /128 masku za IPv6. IP domet kao 192.168.1.1-192.168.1.254 može biti unesen i lista CIDR mreža će biti derivirana za popunjavanje dometa.

en: Never
bs: Nikad

en: New
bs: Novo

en: New Access List
bs: Nova pristupna lista

en: New CSR (Paste below)
bs: Novi CSR (zalijepi ispod)

en: New IPv4 Gateway
bs: Novi IPv4 gateway

en: New IPv6 Gateway
bs: Novi IPv6 gateway

en: New Limiter
bs: Novi limiter

en: New alert found: %s
bs: Novo upozorenje pronađeno: %s

en: New picture:
bs: Nova slika:

en: New/Edited Check IP Services entry was posted.
bs: Novi/Editovani Check IP servis unos je stavljen.

en: New/Edited RFC2136 dnsupdate entry was posted.
bs: Novi/Editovani RFC2136 dnsupdate unos je postavljen.

en: Newer than available (%s)
bs: Novije nego što je dostupno (%s)

en: Newer version available
bs: Novija verzija dostupna

en: Next Server
bs: Sljedeći server

en: Next page
bs: Naredna stranica

en: No
bs: Ne

en: No Authentication
bs: Bez autentikacije

en: No BINAT (NOT)
bs: Bez BINAT (NOT)

en: No CARP Interfaces Defined.
bs: Nijedan CARP interfejs nije definisan.

en: No CARP interfaces have been defined.
bs: Nijedan CARP interface nije definisan.

en: No Cached IP found.
bs: Nije pronađen kešovani IP.

en: No Cached IPv6 found.
bs: Kešovani IPv6 nije pronađen.

en: No Captive Portal zones have been configured. New zones may be added here: %1$sServices > Captive Portal%2$s.
bs: Nijedna zona zabranjenog portala nije konfigurisana. Nove zone mogu biti dodane ovdje: %1$sServisi > Sigurnosni portal%2$s

en: No Certificate Authorities defined.<br/>Create one under <a href="system_camanager.php">System &gt; Cert. Manager</a>.
bs: Nijedan certifikatski autoritet nije definisan. <br/>Stvorite jedan u meniju <a href="system_camanager.php">Sistem &gt; Upravitelj certifikatima</a>.

en: No Certificates defined. One may be created here: %1$s%2$s%3$s
bs: Nijedan certifikat nije definisan. Možete ga napraviti ovdje: %1$s%2$s%3$s

en: No Certificates have been defined. A certificate is required before SSL can be enabled. %1$s Create or Import %2$s a Certificate.
bs: Nijedan certifikat nije definisan. Certifikat je potreban prije no se SSL uključi. %1$sStvori ili uvezi %2$s certifikat.

en: No Change In IP Address
bs: Nema promjene u IP adresi

en: No Change In IP Address.
bs: Nema promjene u IP adresi.

en: No Default
bs: Bez zadanog

en: No Dynamic DNS Service provider was selected.
bs: Nijedan provajder dinamičkog DNS servisa nije odabran.

en: No Hardware Crypto Acceleration
bs: Bez hardverske crypto akceleracije

en: No Hostname Provided.
bs: Hostname nije specificiran.

en: No IPsec pools.
bs: Nema IPsec poolova

en: No IPsec security associations.
bs: Nema IPsec sigurnosnih asocijacija

en: No IPsec security policies configured.
bs: Nijedan IPsec smjer nije definisan.

en: No IPsec status information available.
bs: Nikakve IPsec statusne informacije nisu dostupne

en: No LZO Compression [Legacy style, comp-lzo no]
bs: Bez LZO kompresije [Legacy style, comp-lzo no]

en: No Mirrors Found
bs: Nijedan mirror nije pronađen

en: No OpenVPN instances defined
bs: Niti jedna OpenVPN instanca nije definisana

en: No OpenVPN instances defined.
bs: Niti jedna OpenVPN instanca nije definisana.

en: No Password Provided.
bs: Lozinka nije specificirana.

en: No Queue Configured/Selected
bs: Nijedan red nije konfigurisan/selektovan

en: No Service
bs: Bez signala

en: No Service: Dynamic DNS Service has been disabled for this domain.
bs: Bez signala: Dinamički DNS servis je isključen za ovu domenu.

en: No URL for getURL
bs: Nema URLa za getURL

en: No Update URL Provided.
bs: URL ažuriranja nije specificiran

en: No Username Provided.
bs: Korisničko ime nije specificirano.

en: No VLAN capable interfaces detected.
bs: Nijedan kompatibilan VLAN interface nije pronađen.

en: No XMLRPC Sync
bs: No XMLRPC Sinhronizacije

en: No action State
bs: Stanje bez radnji

en: No action will be taken on gateway events. The gateway is always considered up.
bs: Niti jedna radnja neće biti izvršena nad gejtvej eventima. Ovaj gejtvej se uvijek smatra pokrenutim.

en: No active peers available
bs: Nijedan aktivan peer nije dostupan

en: No backups found.
bs: Niti jedna sigurnosna kopija nije pronađena

en: No block rules set on interface:
bs: Bez blok pravila na interfaceu:

en: No callback function for getURL
bs: Nema funkcije za pozvati za getURL

en: No certificates found for this CA.
bs: Nijedan certifikat nije pronađen za ovaj CA.

en: No certificates found for this CRL.
bs: Nijedan certifikat nije pronađen za ovaj CRL

en: No change in my IP address and/or %s days has not passed. Not updating dynamic DNS entry.
bs: Bez promjene u IP adresi i/ili %s dana nije prošlo. Ažuriranje dinamičkog DNS unosa nije uspješno.

en: No config.xml found, attempting last known config restore.
bs: config.xml nije pronađen, pokušavanje posljednje poznate konfiguracije.

en: No config.xml or config backups found, resetting to factory defaults.
bs: config.xml niti konfiguracijska kopija nisu pronađeni, vraćam na tvorničke zadane postavke.

en: No destination IP has been configured!
bs: Nijedan destinacijski IP nije konfigurisan!

en: No entries exist in this table.
bs: Nijedan unos ne egzistira u ovoj tablici.

en: No entry exists for this mac address:
bs: Nijedan unos ne postoji za ovu mac adresu:

en: No entry exists for this username:
bs: Nijedan unos ne postoji za ovo korisničko ime:

en: No entry exists yet!
bs: Ne postoji još uvijek nijedan unos!

en: No file name specified.
bs: Niti jedno ime fajla nije specificirano.

en: No floating rules are currently defined.
bs: Niti jedno floating pravilo nije trenutno definisano.

en: No gateway(s) have been selected to be used in this group
bs: Nijedan gateway nije selektovan za korištenje u ovoj grupi

en: No gateways found.
bs: Nijedan gejtvej nije pronađen.

en: No gateways to monitor. dpinger will not run.
bs: Nijedan gateway za praćenje. dpinger se neće pokrenuti.

en: No history data found!
bs: Podaci iz povijesti nisu pronađeni!

en: No interfaces found!
bs: Nijedan interface nije pronađen!

en: No internal Certificate Authorities have been defined.
bs: Nijedan interni autoritet za certifikate nije definisan.

en: No leases are in use
bs: Niti jedna posudba se ne koristi

en: No leases file found. Is the DHCPv6 server active?
bs: Nijedan fajl sa posudbama nije nađen. Da li je DHCPv6 server aktivan?

en: No leases from this pool yet.
bs: Nema posudbi iz ovog poola.

en: No leases to display
bs: Niti jedna posudba za prikaz

en: No limiters were found on this system.
bs: Nijedan limiter nije pronađen na sistemu.

en: No link-up detected.%s
bs: Niti jedna poveznica nije detektovana. %s

en: No load balancers have been configured.
bs: Nijedan load balanser nije konfigurisan.

en: No logs to display
bs: Nijedan log za prikaz

en: No logs to display.
bs: Nijedan log za prikaz

en: No members found on %s
bs: Nijedan član nije pronađen na %s

en: No mirrors found.
bs: Nijedan mirror nije pronađen.

en: No output received, or connection failed. Try with "Show Remote Text" unchecked first.
bs: Izlaz nije primljen, ili je konekcija pala. Pokušajte deselektovati "Show remote text".

en: No packages installed.
bs: Nijedan paket nije instaliran.

en: No packages with logging facilities are currently installed.
bs: Nijedan paket sa logging sadržajima nije trenutno instaliran.

en: No page assigned to this user! Click here to logout.
bs: Nijedna stranica nije dodijeljena ovom korisniku! Kliknite ovdje za odjavu.

en: No password specified for username %s
bs: Lozinka nije specificirana za korisničko ime %s

en: No peers found, %1$sis the ntp service running?%2$s
bs: Nijedan peer nije pronađen, %1$sDa li je ntp servis pokrenut?%2$s

en: No pfSync
bs: Bez pfSync

en: No phase2 specifications for tunnel with REQID = %s
bs: Niti jedna specifikacija faze2 za tunnel sa REQID = %s

en: No private CAs found. A private CA is required to create a new user certificate. Save the user first to import an external certificate.
bs: Nijedan privatni CA nije pronađen. Privatni CA je neophodan za stvaranje novog korisničkog certifikata. Spasite korisnika prvo pa onda uvezite eksterni certifikat.

en: No queue statistics could be read.
bs: Nikakva statistika o redovima nije mogla biti učitana.

en: No queue with name %s was found!
bs: Nijedan red sa imenom %s nije pronađen!

en: No record exists.
bs: Nijedan unos ne postoji.

en: No response
bs: Bez odgovora

en: No rules are currently defined for this interface
bs: Niti jedno pravilo nije definisano za ovaj interface.

en: No saved WoL addresses
bs: Niti jedna spašena WoL adresa

en: No services found
bs: Nijedan servis nije pronađen

en: No services found.
bs: Nijedan servis nije pronađen.

en: No source tracking entries were found.
bs: Nijedan izvor praćenja nije pronađen

en: No states were found that match the current filter.
bs: Niti jedno stanje nije pronađeno koje se poklapa sa trenutnim filterom.

en: No states were found.
bs: Niti jedno stanje nije pronađeno

en: No such host
bs: Ne postoji takav host

en: No such zone exists.
bs: Ne postoji takva zona.

en: No suitable interface found for running dhcrelay -6!
bs: Ne postoji odgovarajući interface za pokretanje dhcrelay -6!

en: No suitable interface found for running dhcrelay!
bs: Ne postoji odgovarajući interface za pokretanje dhcrelay!

en: No type exists.
bs: Nijedan tip ne postoji.

en: No unused consumers found
bs: Nijedan nekorišten korisnik nije pronađen.

en: No updates
bs: Bez ažuriranja

en: No valid package defined.
bs: Nijedan validan paket nije definisan.

en: No value exists.
bs: Ne postoji vrijednost.

en: No virtual servers have been configured.
bs: Nijedan virtualni server nije konfigurisan.

en: Node Type
bs: Tip čvora

en: Node information reply
bs: Odgovor za informacije o čvoru

en: Node information request
bs: Zahtjev za informacijama o čvoru

en: Non-Temporary Address Allocation
bs: Ne-temporarne alokacije adresa

en: None
bs: Nijedan

en: None (No Authentication)
bs: Niti jedno (Bez autentikacije)

en: None (No Encryption)
bs: Niti jedno (bez enkripcije)

en: None (Username and/or Password required)
bs: Niti jedno (Korisničko ime i/ili password potrebni)

en: None available
bs: Nijedan nije dostupan

en: Normal
bs: Normalno

en: Normal View
bs: Normalni pregled

en: Normal dynamic ARP entries show a countdown timer until they will expire and then be re-checked.
bs: Normalni dinamički ARP unosi prikazuju odbrojavanje kada će isteći i tada će biti ponovno provjereni.

en: Norwegian Bokmål
bs: Norveški Bokmål

en: Not
bs: Ne

en: Not A FQDN
bs: Nije A FQDN

en: Not A FQDN!
bs: Nije A FQDN!

en: Not a valid username or password!
bs: Korisničko ime ili lozinka nisu ispravni!

en: Not actually halting (DEBUG is set true)%s
bs: Ne zaustavljam (DEBUG je uključen) %s

en: Not actually rebooting (DEBUG is set true).
bs: Ne pokrećem ponovo (DEBUG je uključen).

en: Not adding default route because OLSR dynamic gateway is enabled.
bs: Ne dodajem zadanu rutu zbog OLSR dinamičkog gatewaya koji je uključen.

en: Not all drivers/NICs support 802.1Q QinQ tagging properly. %1$sOn cards that do not explicitly support it, QinQ tagging will still work, but the reduced MTU may cause problems.%1$sSee the %2$s handbook for information on supported cards.
bs: Svi drajveri/NICovi podržani ne podržavaju 802.1Q QinQ tagiranje. %1$sNa karticama koje ne podržavaju eksplicitno, QinQ tagovanje će i dalje raditi, ali smanjeni MTU će stvarati probleme. %1$s Pogledaj %2$s upute za informacije o podržanim karticama.

en: Not all drivers/NICs support 802.1Q VLAN tagging properly. %1$sOn cards that do not explicitly support it, VLAN tagging will still work, but the reduced MTU may cause problems.%1$sSee the %2$s handbook for information on supported cards.
bs: Svi drajveri/NICovi podržani ne podržavaju 802.1Q VLAN tagiranje. %1$sNa karticama koje ne podržavaju eksplicitno, VLAN tagovanje će i dalje raditi, ali smanjeni MTU će stvarati probleme. %1$s Pogledaj %2$s upute za informacije o podržanim karticama.

en: Not available.
bs: Nije dostupno.

en: Not executing custom deinstall hook because an include is missing.
bs: Ne pokrećem svojstvene deinstalacijske kopče jer include fali.

en: Not installing NAT reflection rules for a port range > 500
bs: Ne instaliraju se pravila za port range > 500

en: Not member of
bs: Nije član

en: Not members
bs: Nisu članovi

en: Not yet ready%1$s Retrying in another %2$s seconds
bs: Još nije spreman%1$s Pokušavam opet nakon %2$s sekundi

en: Note
bs: Napomena

en: Note that the line number in the full PHP response will be %s lines too large. Nested code and eval() errors may incorrectly point to "line 1".
bs: Upamtite da broj linija u punom PHP odgovoru će biti %s linija prevelik. Skupljeni kod i eval() greške mogu netačno pokazati na "liniju 1".

en: Note:	This will redirect the console output and messages to the serial port. The console menu can still be accessed from the internal video card/keyboard. A %1$snull modem%2$s serial cable or adapter is required to use the serial console.
bs: Napomena: Ovo će preusmjeriti konzolni izlaz i poruke ka serijskom portu. Konzolnom meniju se i dalje može pristupiti preko interne video kartice/tastature. %1$snull modem%2$s, serijski kabl ili adapter je potreban za korištenje.

en: Note: Leave this blank for the default of 22.
bs: Napomena: ostavite ovo polje prazno za zadanu vrijednost 22

en: Note: Reflection on 1:1 mappings is only for the inbound component of the 1:1 mappings. This functions the same as the pure NAT mode for port forwards. For more details, refer to the pure NAT mode description above. Individual rules may be configured to override this system setting on a per-rule basis.
bs: Napomena: Reflekcija na 1:1 mapiranjima je samo za unutaropsežnu komponentu 1:1 mapiranja. Ovo funkcioniše isto kao čisti NAT način za forwardanje portova. Za više detalja, pogledajte čisti NAT opis iznad. Pojedinačna pravila mogu biti konfigurisana za overrideanje ovih sistemskih postavki na način po-pravilo.

en: Note: Semi-Colon separated. This will be prepended to the search base dn above or the full container path can be specified containing a dc= component.%1$sExample: CN=Users;DC=example,DC=com or OU=Staff;OU=Freelancers
bs: Napomena: Razdvojeno tačka-zarezom. Ovo će biti uključeno u bazu za pretragu dn-a iznad ili cijelog kontejnera te može biti specificirano sintaksom dc = component. %1$sNa primjer: CN=Users;DC=example,DC=com ili OU=Staff; OU=Freelancers

en: Note: The antenna numbers do not always match up with the labels on the card.
bs: Napomena: Antenski brojevi se ne poklapaju uvijek sa natpisima na karticama

en: Note: This converts %1$s into a routing only platform!%2$sNote: This will also turn off NAT! To only disable NAT, and not firewall rules, visit the %3$sOutbound NAT%4$s page.
bs: Napomena: Ovo pretvara %1$s u platformu za routanje!%2$sNapomena: Ovo će također isključiti NAT! Da bi samo isključili NAT a ne firewall pravila, posjetite %3$sVanospežni NAT%4$s stranicu.

en: Note: This disables automatically added rules for IPsec.
bs: Napomena: Ovo isključuje automatski dodana pravila za IPsec.

en: Note: This enables CloudFlares Virtual DNS proxy.  When Enabled it will route all traffic through their servers. By Default this is disabled and your Real IP is exposed.More info: %s
bs: Napomena: ovo uključuje CloudFlareov Virtualni DNS proxy. Kada je uključen, on će usmjeravati sav promet kroz njihove servere. Po zadanom ovo je isključeno i vaš stvarni IP je prikazan. Više informacija: %s

en: Note: With DynDNS service only a hostname can be used, not an IP address. Set this option only if a special MX record is needed. Not all services support this.
bs: Napomena: Sa DynDNS servisom samo hostname može biti korišten, ne IP adresa. Postavite ovu opciju samo ako je poseban MX unos potreban. Ne podržavaju svi servisi ovu opciju.

en: Note: leave blank to use the system default DNS servers - this interface's IP if DNS Forwarder or Resolver is enabled, otherwise the servers configured on the General page.
bs: Napomena: ostavite prazno da koristite sistemski zadane DNS servere - ovaj interfaceov IP ako su DNS forwarder ili resolver su uključeni, inače serveri konfigurisani na Generalno stranici.

en: Note: this only works for TCP rules. General OS choice matches all subtypes.
bs: Napomena: ovo radi samo za TCP pravila. Generalni OS izbor poklapa sve podtipove.

en: Notes
bs: Zabilješke

en: Nothing to recall
bs: Ništa za vratiti

en: Notices
bs: Napomene

en: Notification E-Mail address
bs: Notifikacijska e-mail adresa

en: Notification E-Mail auth mechanism
bs: Notifikacijski E-Mail mehanizam autentikacije

en: Notification E-Mail auth password
bs: Notifikacijski E-Mail autentikacijska lozinka

en: Notification E-Mail auth username (optional)
bs: Notifikacijski E-Mail autentikacijsko korisničko ime (opcionalno)

en: Notification Name
bs: Ime notifikacije

en: Notifications
bs: Notifikacije

en: November
bs: Novembar

en: Now Searching for %s in directory.
bs: Pretraživanje direktorija za %s.

en: Now Searching in server %1$s, container %2$s with filter %3$s.
bs: Pretraživanje servera %1$s, spremnika %2$s sa kriterijumom %3$s.

en: Number
bs: broj

en: Number of Hosts to Cache
bs: Broj hostova za keširanje

en: Number of L2TP users must be between 1 and 255
bs: Broj L2TP korisnika mora biti između 1 i 255

en: Number of PPPoE users must be between 1 and 255
bs: Broj PPPoE korisnika mora biti između 1 i 255

en: Number of Queries per Thread
bs: Broj upita po threadu

en: Number of buckets available
bs: Dostupan broj bucketa

en: Number of bytes size to advertise as the EDNS reassembly buffer size. This is the value that is used in UDP datagrams sent to peers. RFC recommendation is 4096 (which is the default). If fragmentation reassemble problems occur, usually seen as timeouts, then a value of 1480 should help. The 512 value bypasses most MTU path problems, but it can generate an excessive amount of TCP fallback.
bs: Broj bajta za reklamiranje kako EDNS ponovo sklapa svoju buffer veličinu. Ovo je vrijednost koja će se koristiti u UDP dijagramima koji se šalju peerovima. RFC preporuka je 4096 (što je zadana vrijednost). Ako problemi u fragmentaciji prilikom sastavljanja se pojave, obično kao timeouti (isteci vremena), tada bi trebala proći vrijednost od 1480. 512 vrijednost prolazi mnoge MTU probleme, ali može stvoriti prevelik broj TCP fallbackova.

en: Number of consecutive failures allowed before disconnect.
bs: Broj uzastopnih neuspjeha prije diskonektovanja.

en: Number of entries
bs: Broj unosa

en: Number of infrastructure hosts for which information is cached. The default is 10,000.
bs: Broj infrastrukturnih hostova za koje je informacija keširana. Zadano je 10,000.

en: Number of log entries to show must be between 5 and 2000.
bs: Broj log unosa za prikaz mora biti između 5 i 2000.

en: Number of processes forked in advance by relayd. Leave blank to use the default value of 5 processes.
bs: Broj forkanih procesa unaprijed od strane relayd. Ostavite prazno da koristite zadanu vrijednost od 5 procesa.

en: Number of users
bs: Broj korisnika

en: OS detection is only valid with protocol TCP.
bs: OS detekcija je validna jedino sa TCP protokolom.

en: Object class used for groups in RFC2307 mode. Typically "posixGroup" or "group".
bs: Objektna klasa korištena za grupe u RFC2307 načinu. Tipično je to "posixGroup" ili "group" .

en: Obscure location in timestamp (default: unchecked, unobscured).
bs: Nejasna lokacija u timestamp (zadano: nije odabrano, nejasno).

en: Obtaining filter status...
bs: Preuzimam status filtera...

en: Obtaining update status %s
bs: Preuzimanje statusa ažuriranja %s

en: October
bs: Oktobar

en: Off
bs: Isključeno

en: Offline (forced)
bs: Offline (forsirano)

en: Offset
bs: Odstupanje

en: Omit Preference (Use OpenVPN Default)
bs: Omit preferenca (Koristi OpenVPN kao zadano)

en: Omit Preference, + Disable Adaptive LZO Compression [Legacy style, comp-noadapt]
bs: Omit preferenca + Isključi adaptivnu LZO kompresiju [legacy style, comp-noadapt]

en: On
bs: Uključeno

en: One (Client+Server)
bs: Jedan (Klijent + Server)

en: One Level
bs: Jedan nivo

en: One moment while the initial setup wizard starts.
bs: Sačekajte trenutak dok se inicijalni setup čarobnjak pokrene.

en: One moment while the settings are reloading...
bs: Jedan trenutak dok se postavke ponovo učitaju...

en: One moment...redirecting to %s in 20 seconds.
bs: Trenutak... preusmjeravam na %s za 20 sekundi.

en: One or more NAT 1:1 mappings have been moved but have not yet been saved
bs: Jedno ili više NAT 1:1 mapiranja su premještena ali još nisu spašena

en: One or more NAT outbound mappings have been moved but have not yet been saved
bs: Jedna ili više vanopsežnih NAT mapiranja su pomjerena i nisu spašena

en: One or more NPt mappings have been moved but have not yet been saved
bs: Jedno ili više NPt mapiranja je pomjereno ali još uvijek nije spašeno

en: One or more Network Interfaces must be selected for binding.
bs: Jedan ili više mrežnih interfaceova mora biti selektovan za dodjelu.

en: One or more Outgoing Network Interfaces must be selected.
bs: Jedan ili više odlazećih mrežnih interfaceova mora biti selektovan

en: One or more Port Forward rules have been moved but have not yet been saved
bs: Jedno ili više pravila za forwardanje portova je pomjereno ali još uvijek nije spašeno

en: One or more invalid group members was submitted.
bs: Jedan ili više članova grupe nije bio validan prije slanja.

en: One or more invalid groups was submitted.
bs: Jedna ili više pogrešnih grupa je poslano.

en: One or more of the selected NCP Algorithms is not valid.
bs: Jedan ili više selektovanih NCP algoritama nije validan.

en: One or more rules have been moved but have not yet been saved
bs: Jedno ili više pravila je pomjereno ali još nije spašeno

en: One or more widgets have been moved but have not yet been saved
bs: Jedan ili više widgeta su pomjereni a nisu spašeni

en: Online (unmonitored)
bs: Online (nije praćeno)

en: Online <br/>(unmonitored)
bs: Online <br/> (ne prati se)

en: Only (%1$s) MB RAM has been detected, with (%2$s) available to %3$s.%4$s
bs: Samo(%1$s) MB RAM je pronađen, sa (%2$s) dostupno za %3$s.%4$s

en: Only DH parameter sets which exist in /etc/ are shown.
bs: Samo DH parametar postavlja one koji postoje u /etc/ i koji su prikazani.

en: Only QinQ capable interfaces will be shown.
bs: Samo QinQ kompatibilni interfejsi će biti prikazani.

en: Only Round Robin pool options may be chosen when selecting an alias.
bs: Samo Round Robin pool opcije se mogu izabrati kada se bira alias.

en: Only Round Robin types work with Host Aliases. Any type can be used with a Subnet.
bs: Samo Round Robin tipovi funkcionišu sa Host aliasima. Bilo koji tip se može koristiti sa subnetom.

en: Only VLAN capable interfaces will be shown.
bs: Samo VLAN kompatibilni interfejsi će biti prikazani.

en: Only exchange informational configuration parameters with servers.
bs: Samo razmijeni informacijske konfiguracione parametre sa serverima

en: Only interfaces configured with a static IP will be shown.
bs: Samo interfejsi konfigurisani sa statičkim IPom će biti prikazani.

en: Only letters (A-Z), digits (0-9) and '_' are allowed.
bs: Samo slova (A-Z), cifre (0-9) i '_' su dozvoljeni.

en: Only one 'upstream' interface can be configured.
bs: Samo jedan 'upstream' interface može biti konfigurisan.

en: Only one default queue per interface is allowed.
bs: Samo jedan zadani red po interfaceu je dozvoljen.

en: Only one interface can be configured as 6to4.
bs: Samo jedan interface može biti konfigurisan kao 6to4.

en: Only one interface can be configured within a single 6rd prefix.
bs: Samo jedan interface može biti konfigurisan sa jednim 6tim prefiksom.

en: Only percentage bandwidth specification is allowed.
bs: Samo postoci propusne specifikacije su dozvoljeni.

en: Only request an IPv6 prefix, do not request an IPv6 address
bs: Samo zahtijevaj IPv6 prefiks, ne zahtijevaj adresu

en: Only the clients defined below will get DHCP leases from this server.
bs: Samo klijenti definisani ispod će dobiti DHCP posudbe od ovog servera.

en: Only valid RADIUS servers may be selected as a user source when using EAP-RADIUS for authentication on the Mobile IPsec VPN.
bs: Samo validni RADIUS serveri mogu bili selektovani kao korisnički izvor kada se koristi EAP-RADIUS za autentikaciju na mobilnom IPsec VPN-u.

en: Open a %s configuration XML file and click the button below to restore the configuration.
bs: Otvori %s konfiguraciju XML fajla i klikni dugme ispod da bi vratio konfiguraciju.

en: OpenVPN Client
bs: OpenVPN Klijent

en: OpenVPN Clients
bs: OpenVPN klijenti

en: OpenVPN ID %1$s PID %2$s still running, killing.
bs: OpenVPN ID %1$s PID %2$s je još pokrenut, uništavam proces.

en: OpenVPN Servers
bs: OpenVPN serveri

en: OpenVPN Wizard
bs: OpenVPN wizard

en: OpenVPN client
bs: OpenVPN klijent

en: OpenVPN configuration
bs: OpenVPN konfiguracija

en: OpenVPN configuration saved via OpenVPN Remote Access Server setup wizard.
bs: OpenVPN konfiguracija spašena preko OpenVPN udaljenog servera.

en: OpenVPN: Resync client %s
bs: OpenVPN: Reaktualiziranje klijenta %s

en: OpenVPN: Resync server %s
bs: OpenVPN: Reaktualiziranje servera %s

en: Optimizes the packet write event loop, improving CPU efficiency by 5% to 10%. Not compatible with all platforms, and not compatible with OpenVPN bandwidth limiting.
bs: Optimizuje paket pisanje, tako što poboljšava CPU efikasnost od 5% do 10%. Nije kompatibilno sa svim platformama, i nije kompatibilno sa OpenVPN protočnim limitiranjem.

en: Option
bs: Opcija

en: Option modifiers
bs: Modifikatori opcija

en: Option(s)
bs: Opcija(e)

en: Optional
bs: Neobavezno

en: Optionally paste a private key here. The key will be associated with the newly signed certificate in pfSense
bs: Opcionalno zalijepite privatni ključ ovdje. On će biti povezan sa novopotvrđenim potpisanim certifikatom u pfSense.

en: Optionally select the gateway for each DNS server.
bs: Opcionalno odaberite gateway za svaki DNS server.

en: Optionally specify how many times to retry checking a server before declaring it down.
bs: Opcionalno specificiraj koliko puta ponovo provjeriti da li server radi prije nego se proglasi da je ugašen.

en: Options
bs: Opcije

en: Orange
bs: Narandžasta

en: Organization units found
bs: Organizacione jedinke pronađene

en: Organizational Unit
bs: Organizacijska jedinica

en: Orientation
bs: Orijentacija

en: Orphan Mode
bs: Orphan način

en: Orphan mode allows the system clock to be used when no other clocks are available. The number here specifies the stratum reported during orphan mode and should normally be set to a number high enough to insure that any other servers available to clients are preferred over this server (default: 12).
bs: Orphan način dozvoljava sistemskom satu da se koristi kada nijedan drugi sat nije dostupan. Broj naveden ovdje specificira stratum koji će biti prijavljen tokom orphan načina i trebao bi prirodno biti potavljen na broj dovoljno velik da se osigura da je bilo koji drugi server dostupan klijentu preporučen u odnosu na ovaj server (zadano: 12).

en: Other
bs: Ostalo

en: Other
bs: Drugo

en: Other Options
bs: Ostale opcije

en: Other Subnet (Enter Below)
bs: Drugi subnet (Unesi ispod)

en: Other dashboard settings are available from the <a href="%s">General Setup</a> page.
bs: Druga podešavanja panela su dostupna sa <a href="%s">Osnovna Podešavanja</a> stranice.

en: Other subnet
bs: Drugi subnet

en: Out
bs: Van

en: Outbound
bs: Izvan opsega

en: Outbound NAT Mode
bs: Vanopsežni NAT način

en: Outdoor
bs: Vani

en: Outer Source Filtering
bs: Filtriranje vanjskog izvora

en: Outgoing TCP Buffers
bs: Odlazeći TCP baferi

en: Outlier
bs: Van zajednice

en: Output
bs: Izlaz

en: Override the configuration from this file.
bs: Overrideaj konfiguraciju iz ovog fajla.

en: Overview
bs: Pregled

en: Overwrote previous installation of %s.
bs: Pisao preko prethodne instalacije %s

en: P1 Description
bs: P1 opis

en: P1 Protocol
bs: P1 protokol

en: P1 Transforms
bs: P1 transformacija

en: P2 Auth Methods
bs: P2 Metode autentikacije

en: P2 Protocol
bs: P2 protokol

en: P2 Transforms
bs: P2 transformacije

en: P2 actions
bs: P2 radnje

en: PASSED
bs: PROŠLO

en: PAYLOAD:
bs: NOSIVOST:

en: PF was wedged/busy and has been reset.
bs: PF je zauzet i zato je resetovan.

en: PFS key group
bs: PFS ključ grupa

en: PPP Configuration
bs: PPP Konfiguracija

en: PPP Events (PPPoE WAN Client, L2TP WAN Client, PPTP WAN Client)
bs: PPP eventi (PPPoE Wan klijent, L2TP WAN klijent, PPTP Wan klijent)

en: PPP Interfaces
bs: PPP interfejsi

en: PPP Password and confirmed password must match!
bs: PPP lozinka i potvrđena lozinka se moraju poklapati!

en: PPPoE Configuration
bs: PPPoE konfiguracija

en: PPPoE Logins
bs: PPPoE prijave

en: PPPoE Password and confirmed password must match!
bs: PPPoE lozinka i potvrđena lozinka se moraju poklapati!

en: PPPoE Server Configuration
bs: PPPoE konfiguracija servera

en: PPPoE Service
bs: PPPoE servis

en: PPPoE clients
bs: PPPoE klijenti

en: PPPoE password
bs: PPPoE lozinka

en: PPPoE username
bs: PPPoE korisničko ime

en: PPPs
bs: PPPovi

en: PPTP local IP address
bs: PPTP lokalna IP adresa

en: PPTP password
bs: PPTP lozinka

en: PPTP remote IP address
bs: PPTP udaljena IP adresa

en: PPTP username
bs: PPTP korisničko ime

en: PPTP/L2TP Configuration
bs: PPTP/L2TP Konfiguracija

en: PSK for any user can be set by using an identifier of any.
bs: PSK Za bilo kojeg korisnika može biti postavljen koristeći identifikator bilo kojeg.

en: PTP Ports
bs: PTP portovi

en: PTP interface (%s) is not part of the bridge. Remove the PTP interface to continue.
bs: PTP interface (%s) nije dio bridgea. Uklonite PTP interface za nastavak.

en: PTPP Password and confirmed password must match!
bs: PTPP lozinka i potvrđena lozinka se moraju poklapati!

en: Package
bs: Paket

en: Package %s does not exist in current %s version and it has been removed.
bs: Paket %s ne postoji u trenutnoj %s verziji i uklonjen je.

en: Package Dependencies
bs: Zavisnosti paketa

en: Package Functions
bs: Paket funkcija

en: Package Installation
bs: Instalacija paketa

en: Package Installer
bs: Paketni instaler

en: Package Logs
bs: Logovi paketa

en: Package Manager
bs: Upravitelj paketa

en: Package Reinstallation
bs: Reinstalacija paketa

en: Package Removal
bs: Uklanjanje paketa

en: Package configuration changes saved from package settings page.
bs: Promjene u konfiguraciji paketa spašene sa stranice paketne postavke.

en: Package configuration item deleted from package settings page.
bs: Stavka paketne konfiguracije obrisana sa stranice paketne postavke.

en: Package is configured but not (fully) installed
bs: Paket je konfigurisan ali nije instaliran u potpunosti.

en: Package is configured, but not installed!
bs: Paket je konfigurisan ali nije instaliran!

en: Package path %s not found.
bs: Put do paketa %s nije nađen.

en: Package reinstall
bs: Paketna reinstalacija

en: Package reinstall process was ABORTED due to lack of internet connectivity
bs: Reinstalacija paketnog procesa je prekinuta zbog nedostatka internet konekcije

en: Packages
bs: Paketi

en: Packages Reinstallation
bs: Reinstalacija paketa

en: Packages can be installed <a href="pkg_mgr.php" class="alert-link">here</a>.
bs: Paketi mogu biti instalirani <a href="pkg_mgr.php" class="alert-link">ovdje</a>.

en: Packages may be added/managed here:
bs: Paketima možete upravljati/dodavati ih ovdje:

en: Packet
bs: Paket

en: Packet Capture
bs: Snimanje paketa

en: Packet Capture Options
bs: Opcije snimanja paketa

en: Packet Length
bs: Dužina paketa

en: Packet Loss
bs: Gubitak paketa

en: Packet Loss Rate
bs: Odnos gubitka paketa

en: Packet Loss Rate must be a value between 0 and 1.
bs: Paketni gubitak mora biti vrijednost između 0 i 1

en: Packet Loss or High Latency
bs: Gubitak paketa ili visoka latentnost

en: Packet Loss or High latency
bs: Gubitak paketa ili visoka latentnost

en: Packet Loss thresholds
bs: Odstupanje gubitka paketa

en: Packet capture is running.
bs: Snimanje paketa je pokrenuto.

en: Packet too big
bs: Paket prevelik

en: Packetloss
bs: Gubitak paketa

en: Packets
bs: Paketi

en: Packets Captured
bs: Snimljeni Paketi

en: Packets In
bs: Paketi in

en: Packets Out
bs: Paketi out

en: Packets that are allowed by the implicit default pass rule will be logged if this option is checked. Per-rule logging options are still respected.
bs: Paketi kojima je dozvoljen prolaz implicitnog pravila će biti logovani ako je ova opcija označena. Pravilo po logu se još uvijek poštuje.

en: Packets that are blocked by the implicit default block rule will not be logged if this option is unchecked. Per-rule logging options are still respected.
bs: Paketi koji su blokirani implicitnim zadanim blok pravilom neće biti prijavljeni ako ova opcija nije označena. Pravilo po logu se još uvijek poštuje.

en: Packets-In:
bs: Paketi-In:

en: Packets-Out:
bs: Paketi-Out:

en: Paid Support
bs: Plaćena podrška

en: Parameter problem (invalid IP header)
bs: Problem sa parametrom (neispravan IP naslov)

en: Parent domain of host
bs: Roditeljska domena hosta

en: Parent domain of the host%1$se.g. enter "example.com" for "myhost.example.com"
bs: Roditeljski domen hosta %1$ssnpr unesi "example.com" za "myhost.example.com"

en: Parent interface
bs: Roditelj interface

en: Partial MAC addresses can only be matched using 1, 2, or 4 MAC segments (bytes).
bs: Parcijalna MAC adresa može biti spojena koristeći 1, 2 ili 4 MAC segmenta (bajta).

en: Pass traffic
bs: Zaobiđi promet

en: Pass-through MAC Auto Entry
bs: Pass-through MAC auto unos

en: Pass-through credits per MAC address.
bs: Pass-through krediti po MAC adresi

en: Password
bs: Lozinka

en: Password and confirm password must match
bs: Lozinka i potvrda lozinke se moraju poklapati

en: Password and confirmation must match.
bs: Lozinka i potvrda se moraju poklapati.

en: Password and confirmed password must match.
bs: Lozinka i potvrđena lozinka se moraju poklapati.

en: Password for authentication to proxy server.
bs: Password za autentikaciju na proxy server

en: Password protect the console menu
bs: Zaštita lozinkom konzolnog menija

en: Password successfully changed.
bs: Lozinka uspješno promijenjena

en: Password:
bs: Lozinka:

en: Paste a Certificate Revocation List in X.509 CRL format here.
bs: Zalijepi listu ukinutih certifikata u X.509 CRL formatu ovdje.

en: Paste a Certificate Signing Request in X.509 PEM format here.
bs: Zalijepi zahtjev za verifikaciju certifikata u X.509 PEM formatu ovdje.

en: Paste a certificate in X.509 PEM format here.
bs: Zalijepi certifikat u formatu X.509 PEM ovdje

en: Paste a private key in X.509 PEM format here.
bs: Zalijepi privatni ključ u X.509 PEM formatu ovdje.

en: Paste an HMAC-MD5 key here.
bs: Zalijepite HMAC-MD5 ključ ovdje

en: Paste an RSA private key (64 Bit or smaller) in PEM format here. This key is only used to generate encrypted vouchers and doesn't need to be available if the vouchers have been generated offline.
bs: Zalijepi RSA privatni ključ (64 bitni ili manji) u PEM formatu ovdje. Ovaj ključ je korišten samo za generisanje enkriptovanih vaučera i ne treba biti dostupan ako su vaučeri generisani offline.

en: Paste an RSA public key (64 Bit or smaller) in PEM format here. This key is used to decrypt vouchers.
bs: Zalijepi RSA javni ključ (64 bitni ili manji) u PEM formatu ovdje. Ovaj ključ se koristi za dekriptovanje vaučera.

en: Paste in the aliases to import separated by a carriage return. Common examples are lists of IPs, networks, blacklists, etc. The list may contain IP addresses, with or without CIDR prefix, IP ranges, blank lines (ignored) and an optional description after each IP. e.g.:
bs: Zalijepite aliase za importovanje razdvojene carriage vraćanjem. Česti primjeri su liste Ipova, mreža, crnih listi itd. Lista može sadržavati IP adrese sa ili bez CIDR prefiksa, IP intervale, prazne linije (ignorisano) i opcionalne opise nakon svakog IPa npr:

en: Paste in the ports to import separated by a carriage return. The list may contain port numbers, port ranges, blank lines (ignored) and an optional description after each port. e.g.:
bs: Zalijepite portove za importovanje razdvojene carriage vraćanjem. Lista može sadržavati port brojeve, port intervale, prazne linije (ignorisano) i opcionalni opis nakon svakog porta npr:

en: Paste the TLS key here.%1$sThis key is used to sign control channel packets with an HMAC signature for authentication when establishing the tunnel.
bs: Zalijepite TLS ključ ovdje. %1$sOvaj ključ se koristi za potpisivanje kontrolnih kanalnih paketa sa HMAC potpisom za autentikaciju kada se tunnel uspostavlja.

en: Paste the certificate received from the certificate authority here.
bs: Zalijepite certifikat dobijen od certifikat autoriteta ovdje.

en: Paste the private key for the above certificate here. This is optional in most cases, but is required when generating a Certificate Revocation List (CRL).
bs: Zalijepite privatni ključ za certifikat naveden iznad ovdje. Ovo je opcionalno u većini slučajeva ali je potrebno kada se generiše Certifikatska lista isključenja (CRL).

en: Paste the shared key here
bs: Zalijepi dijeljeni ključ ovdje

en: Path
bs: Putanja

en: Path to file to be edited
bs: Putanja do fajla će biti promijenjena

en: Pause
bs: Pauziraj

en: Peer Association
bs: Peer asocijacija

en: Peer Certificate Authority
bs: Peer autoritet certifikata

en: Peer Certificate Revocation list
bs: Peer lista ukinuća certifikata

en: Peer IP address
bs: Motrena IP adresa

en: Peer State
bs: Peer stanje

en: Peer address where encapsulated GRE packets will be sent.
bs: Peer adresa gdje će se enkapsulirani GRE paketi slati.

en: Peer address where encapsulated gif packets will be sent.
bs: Peer adresa gdje će enkapsulirani gif paketi biti poslani.

en: Peer to Peer ( Shared Key )
bs: Peer to Peer ( Dijeljeni ključ )

en: Peer to Peer Server Instance Statistics
bs: Peer to Peer statistika server instanci

en: Penalty Box
bs: Kazneni okvir

en: Pending
bs: Preostalo

en: Per-user bandwidth restriction
bs: Restrikcija protoka po korisniku

en: Perform a factory reset
bs: Obavi vraćanje na tvorničke postavke

en: Perform self-tests
bs: Izvrši samotestiranje

en: Periodic DHCP Leases Backup
bs: Periodične DHCP sigurnosne kopije posudbi

en: Periodic Logs Backup
bs: Sigurnosne kopije periodičnih logova

en: Periodic RAM Disk Data Backups
bs: Periodičke RAM sigurnosne kopije diskovnih podataka

en: Periodic RRD Backup
bs: Periodične RRD sigurnosne kopije podataka

en: Periodic Reset
bs: Periodični reset

en: Periodic reset
bs: Periodično resetovanje

en: Permanent ARP entries are shown for local interfaces or static ARP entries.
bs: Trajni ARP unosi su prikazani za lokalne interfaceove ili statičke ARP unose.

en: Permit IPsec traffic.
bs: Zabrani IPsec promet.

en: Persist common settings
bs: Zadrži česte postavke

en: Phase 1 Proposal (Algorithms)
bs: Phase 1 prijedlog (algoritmi)

en: Phase 1 Proposal (Authentication)
bs: Phase 1 prijedlog (autentikacija)

en: Phase 2 Proposal (SA/Key Exchange)
bs: Phase 2 zahtjev (SA/Razmjena ključeva)

en: Phase2 PFS Group
bs: Phase2 PFS grupa

en: Phase2 with this Local Network is already defined for mobile clients.
bs: Phase2 sa ovom lokalnom mrežom je već definisano za mobilne klijente

en: Phase2 with this Local/Remote networks combination is already defined for this Phase1.
bs: Phase2 sa ovom lokalnom/udaljenom kombinacijom mreža je već definisan za ovaj Phase1

en: Phone Number
bs: Broj telefona

en: Picture
bs: Slika

en: Picture widget saved via Dashboard.
bs: Widget slike spašen preko kontrolne ploče.

en: Platform Trust Service
bs: Servis vjerovanja platforme

en: Please add a monitor IP address on the monitors tab to use this feature."
bs: Molimo dodajte IP adresu za praćenje na kartici praćenja da bi koristili ovu mogućnost."

en: Please add a pool on the "Pools" tab to use this feature.
bs: Molimo dodajte pool na kartici "Poolovi" za korištenje ove mogućnosti.

en: Please add the interface for upstream, the allowed subnets, and the downstream interfaces for the proxy to allow. Only one "upstream" interface can be configured.
bs: Molimo dodajte interface za upstream, dozvoljene subnete i downstream interfaceove da dozvole proxyije. Samo jedan "upstream" interface može biti konfigurisan.

en: Please check the %1$ssystem log%2$s, the wol command for %3$s (%4$s) did not complete successfully.
bs: Molimo provjerite %1$ssistemski log%2$s wol komandu za %3$s (%4$s) nije završena uspješno.

en: Please check the %1$ssystem log%2$s, the wol command for %3$s did not complete successfully.
bs: Molimo provjerite %1$ssistemski log%2$s wol komandu za %3$s nije završena uspješno.

en: Please choose a Link Type.
bs: Molimo odberite tip veze.

en: Please choose another group name.
bs: Molimo odaberite drugo ime grupe.

en: Please click Create to define one.
bs: Molimo kliknite Stvori za definisanje.

en: Please confirm the selected action:
bs: Molimo potvrdite odabranu radnju:

en: Please double check the contents to ensure this information is acceptable to disclose before submitting.
bs: Molimo provjerite sadržaj radi uvjerenja da su ove informacije prihvatljive prije slanja.

en: Please enter a dynamic domain name for 'My Identifier'
bs: Molimo unesite dinamičko ime domene za 'Moj identifikator'

en: Please enter a fully qualified domain name for 'My Identifier'
bs: Molimo unesite puno kvalifikovano ime domene za 'Moj identifikator'

en: Please enter a fully qualified domain name for 'Peer Identifier'
bs: Molimo unesite puno kvalifikovano ime domene za 'Peer Identifikator'

en: Please enter a keyid tag for 'My Identifier'
bs: Molimo unesite validan keyid tag za 'Moj identifikator'

en: Please enter a keyid tag for 'Peer Identifier'
bs: Molimo unesite keyid tag za 'Peer Identifikator'

en: Please enter a user and fully qualified domain name for 'My Identifier'
bs: Molimo unesite korisnika i puno kvalifikovano ime domene za 'Moj identifikator'

en: Please enter a user and fully qualified domain name for 'Peer Identifier'
bs: Molimo unesite korisnika u puno kvalifikovano ime domene za 'Peer Identifikator'

en: Please enter a valid IP or hostname.
bs: Molimo unesite validan IP ili hostname

en: Please enter a valid port number.
bs: Molimo unesite validan port broj.

en: Please enter a valid source port number, or leave the field blank.
bs: Molimo unesite validan izvorni port broj ili ostavite polje praznim.

en: Please enter an address for 'My Identifier'
bs: Molimo unesite adresu za 'Moj identifikator'

en: Please enter an address for 'Peer Identifier'
bs: Molimo unesite adresu za 'Peer Identifikator'

en: Please fill the bind username/password.
bs: Molimo popunite dodijeljeno korisničko ime/lozinku.

en: Please fill the required values.
bs: Molimo popunite zahtijevane vrijednosti.

en: Please select a gateway, normally the interface selected gateway, so the limiters work correctly
bs: Molimo odaberite gateway, tipično gateway interfacea, tako da limiteri rade korektno

en: Please select a valid Cryptographic Accelerator.
bs: Molimo odaberite validan kriptografski akcelerator.

en: Please select a valid Digest Algorithm.
bs: Molimo odaberite validan Digest algoritam.

en: Please select a valid Key Length.
bs: Molimo odaberite validnu dužinu ključa .

en: Please select a valid Thermal Hardware Sensor.
bs: Molimo odaberite validan termalni hardver senzor.

en: Please select at least one reset option
bs: Molimo odaberite barem jednu reset opciju

en: Please select the stable, or the development branch from which to update the system firmware. %1$sUse of the development version is at your own risk!
bs: Molimo odaberite stabilnu ili granu u razvoju sa koje će se vršiti ažuriranje sistemskog softvera. %1$sKorištenje grane u razvoju je na sopstvenu odgovornosti!

en: Please set the zone on which the operation should be allowed
bs: Molimo postavite zonu na kojoj bi ova operacija trebala biti dozvoljena

en: Please take care when granting these privileges.
bs: Molimo obratite pažnju kada dodjeljujete ove privilegije.

en: Please wait while the installation of %1$s completes.
bs: Molimo sačekajte dok se instalacija %1$s završi.

en: Please wait while the list of packages is retrieved and formatted.
bs: Molimo čekajte dok se lista paketa preuzme i formatira.

en: Please wait while the reinstallation of %1$s completes.
bs: Molimo sačekajte dok se ponovno instaliranje %1$s ne završi.

en: Please wait while the reinstallation of all packages completes.
bs: Molimo sačekajte dok se završi reinstalacija svih paketa.

en: Please wait while the removal of %1$s completes.
bs: Molimo sačekajte dok se ne završi uklanjanje %1$s.

en: Please wait while the system update completes.
bs: Molimo sačekajte dok se sistemski update ne završi.

en: Please wait while the update system initializes
bs: Molimo sačekajte dok se ažurira inicijalizacija sistema

en: Plugins completed.
bs: Plugini završeni.

en: Polling Port
bs: Port pollinga

en: Pool Description
bs: Opis poola

en: Pool End
bs: Pool kraj

en: Pool Placeholder
bs: Držač Poola

en: Pool Start
bs: Pool početak

en: Pool Status
bs: Pool status

en: Pool options
bs: Pool opcije

en: Pools
bs: Poolovi

en: Port %1$s  was assigned to %2$s interfaces:
bs: Port %1$s je dodijeljena %2$s interfaceima:

en: Port Alias Details
bs: Detalji port aliasa

en: Port Forward
bs: Forwardanje portova

en: Port or Range
bs: Port ili domet

en: Port test to host: %1$s Port: %2$s successful.
bs: Port test za host: %1$s Port: %2$s uspješno.

en: Port that the clients will connect to. All connections to this port will be forwarded to the pool cluster. If left blank listening ports from the pool will be used. A port alias listed in Firewall -&gt; Aliases may also be specified here.
bs: Port na koji će se klijenti spajati. Sve konekcije na ovom portu će biti proslijeđene pool klasteru. Ako je ostavljeno prazno, lista portova koje pratimo će biti korištena (iz poola). Port alias naveden u Firewall -&gt; Aliasi se može specificirati ovdje.

en: Port value
bs: Port vrijednost

en: Port where proxy server is listening.
bs: Port koji proxy server prati.

en: Port(s)
bs: Port(ovi)

en: Portal page contents
bs: Sadržaj portalne stranice

en: Ports
bs: Portovi

en: Portuguese (Brazil)
bs: Portugalski (Brazil)

en: Possible options: b-node (broadcasts), p-node (point-to-point name queries to a WINS server), m-node (broadcast then query name server), and h-node (query name server, then broadcast)
bs: Moguće opcije: b-čvor (prenosi), p-čvor (point-to-point imena upita WINS serveru), m-čvor (prenos pa upit imena servera) i h-čvor (upit imena servera pa prenos)

en: Possible options: b-node (broadcasts), p-node (point-to-point name queries to a WINS server), m-node (broadcast then query name server), and h-node (query name server, then broadcast).
bs: Moguće opcije: b-node (prenos), p-node (point-to-point upiti imena WINS serveru), m-node (prenos pa upit imena servera) i h-node (upit imena servera, pa prenos).

en: Potential DNS Rebind attack detected, see http://en.wikipedia.org/wiki/DNS_rebinding<br />Try accessing the router by IP address instead of by hostname.
bs: Potencijalni DNS Rebind napad otkriven, posjeti http://en.wikipedia.org/wiki/DNS_rebinding<br />Probaj pristupiti ruteru preko IP adrese umjesto imena.

en: Power Savings
bs: Štednja energije

en: Powersaving Service
bs: Usluga štednje energije

en: Pre-Shared Key
bs: Pre-Shared Ključ

en: Pre-Shared Key contains invalid characters.
bs: Ranije-Dijeljeni ključ sadrži nevaljane znakove.

en: Pre-Shared Keys
bs: Ranije-Dijeljeni ključevi

en: Pre-authentication redirect URL
bs: Predautentikacijski URL za redirekciju

en: Pre-set
bs: Već zadano

en: Precede with exclamation (!) to exclude match.
bs: Dodajte uzvičnik (!) da bi isključili poklapanje.

en: Prefer DHCP
bs: Preferiraj DHCP

en: Prefer IPv4 over IPv6
bs: Preferiraj IPv4 umjesto IPv6

en: Prefer this clock (default: checked).
bs: Preferiraj ovaj sat (zadano: odabrano).

en: Prefer to use IPv4 even if IPv6 is available
bs: Preferiraj IPv4 iako je IPv6 dostupno

en: Prefetch DNS Key Support
bs: Predučitaj DNS ključ podrške

en: Prefetch Support
bs: Predučitaj podršku

en: Prefix Delegation
bs: Delegacija prefiksa

en: Prefix Delegation From address is not a valid IPv6 Netmask for %s
bs: Prefiksna delegacija od adrese nije validna IPv6 netmaska za %s

en: Prefix Delegation Range
bs: Domet delegacijskog prefiksa

en: Prefix Delegation Size
bs: Veličina delegacijskog prefiksa

en: Prefix Delegation To address is not a valid IPv6 Netmask for %s
bs: Prefiksna delegacija do adrese nije validna IPv6 netmaska za %s

en: Prefix Delegation subnet will be appended to the beginning of the defined range
bs: Prefiks delegacijski subnet će biti dodan na početan definisanog dometa

en: Prefix Interface
bs: Prefix interfejs

en: Prefix interface statement
bs: Iskaz prefiksa interfacea

en: Prefork must be a numeric value
bs: Prefork mora biti numerička vrijednost

en: Prefork value must be between 1 and 32
bs: Prefork vrijednost mora biti između 1 i 32.

en: Preserve common wireless configuration through interface deletions and reassignments.
bs: Zadrži samo zajedničke wireless konfiguracije kroz brisanje interfejsa i ponovnu dodjelu.

en: Presets
bs: Preseti

en: Press ENTER to continue.
bs: Pritisnite ENTER za nastavak.

en: Prevent states created by this rule to be sync'ed over pfsync.
bs: Spriječi stanja kreirana ovim pravilom da budu sinhronizovana preko pfsynca.

en: Prevent the rule on Master from automatically syncing to other CARP members
bs: Spriječi pravilo na masteru od automatske sinhronizacije ka ostalim CARP članovima.

en: Prevent this client from receiving any server-defined client settings.
bs: Spriječi ovog klijenta od primanja bilo kakvih serverski definisanih klijentskih promjena.

en: Prevents the client from connecting to this server. Do not use this option to permanently disable a client due to a compromised key or password. Use a CRL (certificate revocation list) instead.
bs: Sprječava klijenta od spajanja na ovaj server. Nemojte korisiti ovu opciju za trajno isključenje klijenta zbog kompromitovanog ključa ili lozinke. Koristite CRL (certifikatnu listu ukinuća) umjesto toga.

en: Prevents the rule on Master from automatically syncing to other CARP members. This does NOT prevent the rule from being overwritten on Slave.
bs: Sprječava pravilo na Masteru od automatske sinhronizacije sa ostalim CARP članovima. Ovo ne sprječava pravilo da se piše preko njeg na Slaveu.

en: Previous page
bs: Prethodna stranica

en: Primary 802.1X server
bs: Primarni 802.1X server

en: Primary Authentication Source
bs: Primarni autentikacijski izvor

en: Primary Console
bs: Primarna konzola

en: Primary DDNS address
bs: Primarna DDNS adresa

en: Primary L2TP DNS server
bs: Primarni L2TP DNS server

en: Primary RADIUS Server
bs: Primarni RADIUS server

en: Primary RADIUS Server Shared Secret
bs: Primarna RADIUS server dijeljena tajna

en: Primary RADIUS server
bs: Primarni RADIUS server

en: Primary RADIUS server IP address
bs: Primarna IP adresa RADIUS servera

en: Primary domain name server IP address for the dynamic domain name.
bs: Primarno ime domene servera IP adrese za dinamičko ime domene.

en: Priority
bs: Prioritet

en: Priority for STP needs to be an integer between 0 and 61440.
bs: Prioritet za STP mora biti cijeli broj između 0 i 61440.

en: Priority must be an integer between 0 and 7.
bs: Prioritet mora biti integer između 0 i 7.

en: Private Ports
bs: Privatni portovi

en: Private interface (%s) is not part of the bridge. Remove the private interface to continue.
bs: Privatni interface (%s) nije dio bridgea. Uklonite privatni interface za nastavak.

en: Privilege %s removed.
bs: Privilegija %s uklonjena.

en: Privilege %s successfully deleted.
bs: Privilegija %s uspješno obrisana.

en: Privilege information
bs: Informacije o privilegiji

en: Probe Interval
bs: Interval ispitivanja

en: Process
bs: Proces

en: Process PGRMF. Ignores ALL other NMEA sentences. (default: unchecked).
bs: Proces PGRMF. Ignoriše SVE druge NMEA rečenice (zadano: nije odabrano).

en: Processing down interface states
bs: Procesiram stanje interfacea

en: Processing early %1$s rules for package %2$s
bs: Procesiranje ranih %1$s pravila za paket %2$s

en: Processing...
bs: Procesiranje...

en: Promiscuous
bs: Pomiješan

en: Properties
bs: Svojstva

en: Protocol
bs: Protokol

en: Protocol / Port
bs: Protokol/Port

en: Protocol Flags
bs: Protokolne oznake

en: Protocol and IP address families do not match. An IPv4 protocol and an IPv6 IP address cannot be selected.
bs: Protokol i familija IP adresa se ne poklapaju. Nemoguće selektovati IPv4 protokol i IPv6 adresu.

en: Protocol and IP address families do not match. An IPv6 protocol and an IPv4 IP address cannot be selected.
bs: Protokol i familija IP adresa se ne poklapaju. Nemoguće selektovati IPv6 protokol i IPv4 adresu.

en: Protocol counts
bs: Brojač protokola

en: Protocol field compression. This option saves one byte per frame for most frames.
bs: Polje za kompresiju protokola. Ova opcija spašava bajt po frejmu za većinu frejmova.

en: Protocol supplied is invalid
bs: Protokol koji je dat je pogrešan

en: Protocol timing
bs: Tajming protokola

en: Protocol used for spanning tree.
bs: Protokol korišten za razapinjujuće stablo.

en: Protocol version
bs: Verzija protokola

en: Protocols
bs: Protokoli

en: Provide a DNS server list to clients
bs: Daj DNS server klijentima

en: Provide a DNS server list to clients. Addresses may be IPv4 or IPv6.
bs: Daj DNS server listu klijentima. Adrese mogu biti IPv4 ili IPv6.

en: Provide a WINS server list to clients
bs: Daj WINS server listu klijentima

en: Provide a default domain name to clients
bs: Daj zadano ime domene za klijente

en: Provide a list of accessible networks to clients
bs: Daj listu pristupnih mreža klijentima

en: Provide a list of split DNS domain names to clients. Enter a space separated list.
bs: Daj listu razdvojenih DNS domen imena klijentima. Unesite razmakom razdvojenu listu.

en: Provide a login banner to clients
bs: Daj login banner klijentima

en: Provide a virtual IP address to clients
bs: Daj virtualnu IP adresu klijentima

en: Provide a virtual IPv6 address to clients
bs: Daj virtualnu IPv6 adresu klijentima

en: Provide an Access List name.
bs: Daj ime pristupne liste

en: Provide an NTP server list to clients
bs: Daj NTP server listu klijentima

en: Provide the Phase2 PFS group to clients ( overrides all mobile phase2 settings )
bs: Daj Phase2 PFS grupu klijentima (overridea sve mobilne phase2 postavke)

en: Provides extra security by isolating clients so they cannot directly communicate with one another
bs: Daje dodatnu sigurnost pomoću izoliranja klijenata tako da ne mogu direktno komunicirati jedan s drugim

en: Proxy ARP and Other type Virtual IPs cannot be bound to by anything running on the firewall, such as IPsec, OpenVPN, etc.  Use a CARP or IP Alias type address for these types.
bs: Proxy ARP i drugi tipovi virtuelnih IPova ne mogu biti vezani ni za šta što je pokrenuto na firewallu kao npr IPsec, OpenVPN itd. Koristi CARP ili IP alias tip adrese za ove slučajeve.

en: Proxy Authentication
bs: Proxy autentikacija

en: Proxy Password
bs: Proxy lozinka

en: Proxy Support
bs: Proxy podrška

en: Proxy URL must be a valid IP address or FQDN.
bs: Proxy URL mora biti validna IP adresa ili FQDN.

en: Proxy Username
bs: Proxy korisničko ime

en: Proxy host or address
bs: Proxy host ili adresa

en: Proxy password and confirmation must match.
bs: Proxy password i potvrđeni password se moraju poklapati.

en: Proxy port must be a valid port number, 1-65535.
bs: Proxy port mora biti validan port broj, 1-65535.

en: Public Domain
bs: Javna domena

en: Pure NAT
bs: Čisti NAT

en: Purple
bs: Ljubičasta

en: Push Compression
bs: Push kompresija

en: Push the selected Compression setting to connecting clients.
bs: Dodaj selektovane postavke kompresije klijentima koji se spajaju.

en: Puts the hard disk into standby mode when the selected number of minutes has elapsed since the last access.%1$s%2$sDo not set this for CF cards.%3$s
bs: Stavlja hard disk u način mirovanja kada selektovani broj minuta prođe od posljednjeg pristupa. %1$s%2$sNe postavljajte ovo za CF kartice.%3$s

en: QinQ Configuration
bs: QinQ konfiguracija

en: QinQ Interfaces
bs: QinQ Interfejsi

en: QinQ VLANs group
bs: QinQ VLAN grupa

en: QinQ compat VLAN: called with wrong options. Problems with config!%s
bs: QinQ compat VLAN: pozvan sa pogrešnim opcijama. Problemi sa configom!%s

en: QinQ interface does not exist
bs: QinQ interface ne postoji

en: QinQ level already exists for this interface, edit it!
bs: QinQ level već postoji za ovaj interface, modifikuj ga!

en: QinQ members
bs: QinQ članovi

en: QinQs
bs: QinQovi

en: Qlimit must be an integer.
bs: Qlimit mora biti cijeli broj.

en: Qlimit must be positive.
bs: Qlimit mora biti pozitivan.

en: Quantity
bs: Količina

en: Queries
bs: Upiti

en: Query
bs: Upit

en: Query DNS servers sequentially
bs: Upiti DNS servera sekvencijalno

en: Query Time
bs: Vrijeme upita

en: Query time
bs: Vrijeme upita

en: Queue
bs: Red

en: Queue Limit
bs: Limit reda

en: Queue Status
bs: Status reda

en: Queue graphs take 5 seconds to sample data.
bs: Grafovi redova trebaju do 5 sekundi za obradu podataka.

en: Queue limit in packets.
bs: Limit reda u paketima.

en: Queue limit must be an integer
bs: Limit reda mora biti cijeli broj

en: Queue limit must be positive
bs: Limit reda mora biti pozitivan

en: Queue names must be alphanumeric and _ or - only.
bs: Imena redova moraju biti isključivo alfanumerička sa znakovima _ ili -

en: Queue not found!
bs: Red nije pronađen!

en: Queue size (slots)
bs: Veličina reda (slotovi)

en: Queues
bs: Redovi

en: Quick
bs: Brzo

en: RA Subnets
bs: RA subneti

en: RADIUS Accounting Update
bs: RADIUS ažuriranje računanja

en: RADIUS Auth rejected
bs: RADIUS Auth odbijena

en: RADIUS Auth succeeded
bs: RADIUS Auth uspjela

en: RADIUS Authentication
bs: RADIUS autentikacija

en: RADIUS Issued IP Addresses
bs: RADIUSove IP adrese

en: RADIUS MAC Authentication
bs: RADIUS MAC autentikacija

en: RADIUS NAS IP Attribute
bs: RADIUS NAS IP Atribut

en: RADIUS Options
bs: RADIUS opcije

en: RADIUS Protocol
bs: Protokol RADIUS

en: RADIUS Server Settings
bs: RADIUS server postavke

en: RADIUS Shared secret for this firewall
bs: RADIUS dijeljena tajna za ovaj firewall

en: RADIUS accounting update period in seconds
bs: Period RADIUS ažuriranja računanja  u sekundama

en: RADIUS is enabled. The local user database will not be used.
bs: Radius je uključen. Lokalna korisnička baza podataka neće biti korištena.

en: RADIUS issued IPs
bs: RADIUS dodijeljeni IPovi

en: RADIUS port. Leave blank for default (1812)
bs: RADIUS port. Ostavite prazno za zadani port (1812)

en: RADIUS secret and confirmation must match
bs: RADIUS tajna i potvrda se moraju poklapati

en: RADIUS send failed: %s
bs: RADIUS slanje nije uspjelo: %s

en: RADIUS server address
bs: RADIUS server adresa

en: RADIUS shared secret
bs: RADIUS dijeljena tajna

en: RADIUS shared secret. Leave blank to not use a shared secret (not recommended)
bs: RADIUS dijeljena tajna. Ostavite prazno da ne koristite dijeljenu tajnu (nije preporučeno)

en: RADIUS start: %s
bs: RADIUS početak: %s

en: RADIUS_ACCESS_ACCEPT is unexpected for accounting
bs: RADIUS_ACCESS_ACCEPT je neočekivan za računanje

en: RADIUS_ACCOUNTING_RESPONSE is unexpected for authentication
bs: RADIUS_ACCOUNTING_RESPONSE je neočekivan za autentikaciju

en: RADVD will not be enabled on this interface.
bs: RADVD neće biti uključen na ovom interfaceu.

en: RAM Disk Settings (Reboot to Apply Changes)
bs: RAM Disk Postavke (Ponovo pokrenite za primjenjivanje postavki)

en: RAM Disk Size
bs: RAM Disk veličina

en: RFC 1918 networks
bs: RFC 1918 mreže

en: RFC 2136 Client
bs: RFC 2136 klijent

en: RFC 2136 Clients
bs: RFC 2136 Klijenti

en: RFC 2307 Groups
bs: RFC 2307 grupe

en: RFC 2307 style group membership has members listed on the group object rather than using groups listed on user object. Leave unchecked for Active Directory style group membership (RFC 2307bis).
bs: Stil članstva grupe RFC 2307 je izlistan na grupnom objektu radije nego koristeći grupe izlistane na korisničkom objektu. Ostavite neodabrano za stil Aktivnog Direktorija grupe članstva (RFC 2307bis).

en: RFC2136 Clients
bs: RFC2136 Klijenti

en: ROUTING: setting IPv6 default route to %s
bs: ROUTING: postavljam IPv6 zadanu rutu na %s

en: ROUTING: setting default route to %s
bs: ROUTING: postavljam zadanu rutu na %s

en: RRD create failed exited with %1$s, the error is: %2$s
bs: RRD create nije uspio, izlazni kod %1$s, greška je %2$s

en: RRD dump failed exited with %1$s, the error is: %2$s
bs: RRD dump nije uspio, izlazni kod %1$s, greška je: %2$s

en: RRD restore failed exited with %1$s, the error is: %2$s
bs: RRD vraćanje nije uspjelo te je izašlo sa %1$s, greška je: %2$s

en: RTS and CTS
bs: RTS i CTS

en: Radius Protocol
bs: Radius protokol

en: Random
bs: Nasumično

en: Random with Sticky Address
bs: Nasumično sa Sticky adresama

en: Random: Selects an address from the translation address pool at random.
bs: Nasumično: Bira adresu iz translacijsko adresnog poola nasumično

en: Randomize PID's (see src/sys/kern/kern_fork.c: sysctl_kern_randompid())
bs: Kreiraj nasumične PIDove (pogledaj src/sys/kern/kern_fork.c: sysctl_kern_randompid())

en: Randomize the ID field in IP packets (default is 1: Assign random IP IDs)
bs: Randomiziraj ID polje u IP paketima (zadano je 1: Dodijeli nasumične IP IDove)

en: Range From and Range To must both be entered.
bs: Interval od i do moraju biti uneseni.

en: Range begin
bs: Početak intervala

en: Range end
bs: Kraj intervala

en: Range is too large to expand into individual host IP addresses (%s)
bs: Domet je prevelik za ekspanziju na pojedinačne host IP adrese (%s)

en: Range: Date / Times / Name
bs: Domet: Datum / Vremena / Ime

en: Ranges can be specified in the inputs below. Enter a range (2-3) or individual numbers.<br />Click "Add Tag" as many times as needed to add new inputs.
bs: Dometi mogu biti specificirani u ulazima ispod. Unesite domet (2-3) ili individualne članove. <br />Kliknite "Dodaj tag" onoliko puta koliko je potrebno dodati novih ulaza.

en: Rate
bs: Stopa

en: Raw
bs: Sirov

en: Raw Logs
bs: Čisti logovi

en: Reach
bs: Dostupnost

en: Reactivate consumer on mirror
bs: Reaktiviraj korisnika na mirroru

en: Reactivate on %s
bs: Reaktiviraj na %s

en: Read Community String
bs: Čitaj string zajednice

en: Real Address
bs: Stvarna adresa

en: Real Time
bs: Stvarno vrijeme

en: Real/Virtual IP
bs: Stvarna/Virtuelna IP

en: Reason
bs: Razlog

en: Reauth
bs: Reautentikacija

en: Reauthenticate connected users every minute
bs: Reautentikacija spojenih korisnika svake minute

en: Reauthentication
bs: Reautentikacija

en: Reboot
bs: Ponovo pokreni

en: Reboot after changes are installed
bs: Restartuj nakon što su izmjene postavljene

en: Reboot is needed. Please apply the settings in order to reboot.
bs: Ponovno pokretanje je potrebno. Molimo primijenite postavke za ponovno pokretanje.

en: Reboot the system
bs: Ponovo pokreni sistem

en: Rebooting%1$sPage will automatically reload in %2$s seconds
bs: Ponovo pokrećem %1$sStranica će automatski biti ponovo učitana za %2$s sekundi

en: Recall Next Command
bs: Vrati sljedeću komandu

en: Recall Previous Command
bs: Vrati prethodnu komandu

en: Receive antenna
bs: Primanje antene

en: Received Remote Text
bs: Primljeni remote tekst

en: Record Type
bs: Tip unosa

en: Record a timestamp once for each second, useful for constructing Allan deviation plots (default: unchecked).
bs: Upiši timestamp jednom za svaku sekundu, korisno pri konstrukciji Allan devijacijskih plotova (zadano: nije odabrano).

en: Record does not exist in the system. Unable to update record
bs: Podatak ne postoji u sistemu. Nemoguće ažurirati podatak

en: Record exists and must be removed before adding.
bs: Unos postoji i mora biti uklonjen prije dodavanja.

en: Record exists but is not editable.
bs: Unos postoji ali ga je nemoguće modifikovati.

en: Record is not editable.
bs: Unos nije moguće modifikovati.

en: Record type
bs: Tip unosa

en: Red
bs: Crvena

en: Redirect
bs: Redirekt

en: Redirect Gateway
bs: Preusmjeri gejtvej

en: Redirect target IP
bs: Redirekcija traženog IPa

en: Redirect target IP must be IPv4.
bs: Meta za redirektanje IPa mora biti IPv4

en: Redirecting to
bs: Preusmjeravam na

en: Redirecting to the dashboard...
bs: Preusmjeravanje na komandnu tablu...

en: Redirecting...
bs: Preusmjeravanje...

en: Reflection Timeout
bs: Istek reflekcije

en: Refresh
bs: Osvježi

en: Refresh Graph
bs: Osvježi graf

en: Refresh Interval
bs: Osvježi interval

en: Refuse
bs: Odbij

en: Refuse Nonlocal
bs: Odbij nelokalne

en: Register DHCP leases in DNS forwarder
bs: Registruj DHCP posudbe u DNS prosljeđivaču

en: Register DHCP leases in the DNS Resolver
bs: Registruj DHCP posudbe u DNS resolveru

en: Register DHCP static mappings in DNS forwarder
bs: Registruj DHCP statička mapiranja u DNS prosljeđivaču

en: Register DHCP static mappings in the DNS Resolver
bs: Registruj DHCP statička mapiranja u DNS resolveru

en: Registration Name
bs: Registracijsko ime

en: Regular expression reference
bs: Regularni izraz reference

en: Regulatory Settings
bs: Regulatorne postavke

en: Regulatory domain
bs: Regulatorna domena

en: Reinstall
bs: Ponovo instaliraj

en: Reinstall Packages
bs: Reinstaliraj pakete

en: Reinstall package %s
bs: Ponovo instaliraj paket %s

en: Reinstallation of all packages failed.
bs: Reinstalacija svih paketa nije uspjela.

en: Reinstallation of all packages successfully completed.
bs: Reinstalacija svih paketa uspješno završena.

en: Reinstalling package %1$s because its include file(%2$s) is missing!
bs: Reinstaliranje paketa %1$s jer njegov include fajl (%2$s) fali!

en: Reinstalling package %s failed. Take appropriate measures!!!
bs: Reinstaliranje paketa %s nije uspjelo. Poduzmi potrebne mjere!!!

en: Reject
bs: Odbij

en: Reject leases from
bs: Odbij posudbe od

en: Rekey: %1$s seconds (%2$s)
bs: Rekey: %1$s sekundi (%2$s)

en: Related log entries
bs: Povezani log unosi

en: Related settings
bs: Povezane postavke

en: Related status
bs: Povezan status

en: Relay Protocol
bs: Relay protokol

en: Relayd Global Settings
bs: Globalne postavke Relayd

en: Release
bs: Izdaj

en: Release Date:
bs: Datum izlaska:

en: Relinquish Lease
bs: Odustani od posudbe

en: Reload Filter
bs: Ponovo učitaj filter

en: Reload status
bs: Ponovo učitaj status

en: Remember to use these Gateway Groups in firewall rules in order to enable load balancing, failover, or policy-based routing.%1$sWithout rules directing traffic into the Gateway Groups, they will not be used.
bs: Zapamtite da bi trebalo koristiti gateway grupe u firewall pravilima kako bi se uključilo balansiranje prometa, failover ili policy-bazirano preusmjeravanje. %1$sBez pravila koja usmjeravaju promet u Gejtvej Grupe, neće biti korišteni.

en: Remote
bs: Udaljeno

en: Remote Access ( SSL/TLS )
bs: Daleki pristup ( SSL/TLS )

en: Remote Access ( SSL/TLS + User Auth )
bs: Daleki pristup (SSL/TLS + Korisnička autentikacija)

en: Remote Access ( User Auth )
bs: Daleki pristup (Korisnička autentikacija )

en: Remote GIF address endpoint.
bs: Krajnja tačka udaljene GIF adrese

en: Remote GRE address endpoint.
bs: Krajnja tačka udaljene GRE adrese

en: Remote Gateway
bs: Udaljeni gejtvej

en: Remote Host
bs: Udaljeni host

en: Remote ID
bs: Udaljeni ID

en: Remote IP
bs: Udaljeni IP

en: Remote IP address
bs: Udaljena IP adresa

en: Remote Logging Options
bs: Opcije udaljenog logovanja

en: Remote Subnet
bs: Udaljeni subnet

en: Remote Syslog Contents
bs: Sadržaj udaljenog sysloga

en: Remote System Password
bs: Lozinka udaljenog sistema

en: Remote System Username
bs: Korisničko ime udaljenog sistema

en: Remote gateway
bs: Udaljeni gejtvej

en: Remote log servers
bs: Udaljeni log serveri

en: Remote network type
bs: Tip udaljene mreže

en: Remote start address
bs: Početna udaljena adresa

en: Remote text
bs: Remote tekst

en: Remote tunnel IP address
bs: IP adresa udaljenog tunnela

en: Remote tunnel endpoint IP address
bs: Krajnja tačka udaljenog tunnela IP adrese

en: Remote tunnel network
bs: Mreža udaljenih tunnela

en: Remote/Virtual IP
bs: Udaljena/Virtuelna IP

en: Remote:
bs: Udaljeno:

en: Remove
bs: Ukloni

en: Remove Shaper
bs: Ukloni oblikovatelja

en: Remove all source tracking entries from %1$s to %2$s
bs: Ukloni sve izvore praćenja od %1$s do %2$s

en: Remove all state entries from %1$s to %2$s
bs: Ukloni sve unose stanja od %1$s do %2$s

en: Remove all states to and from the filtered address
bs: Ukloni sva stanja od i ka filtriranim adresama

en: Remove consumer from mirror
bs: Ukloni korisnika iz mirrora

en: Remove metadata from disk
bs: Ukloni metadata sa diska

en: Remove package %s
bs: Ukloni paket %s

en: Remove shaper from this interface
bs: Ukloni shaper iz ovog interfacea

en: Remove this SPD Entry
bs: Ukloni ovaj SPD unos

en: Remove this certificate association? (Certificate will not be deleted)
bs: Uklonite ovu certifikatsku asocijaciju (sam certifikat neće biti obrisan)

en: Remove this entry
bs: Ukloni ovaj unos

en: Removed %s package.
bs: Uklonjen %s paket.

en: Removed 15 minute filter reload for Time Based Rules
bs: Uklonjen petnaestominutni filter za učitavanje vremenskih pravila

en: Removing %s components...
bs: Brisanje %s komponenti

en: Removing %s package...
bs: Brisanje %s paketa

en: Removing package...
bs: Uklanjanje paketa...

en: Removing static route for monitor %1$s and adding a new route through %2$s
bs: Uklanjanje statičke rute za monitor %1$s i dodavanje nove rute kroz %2$s

en: Renew
bs: Obnovi

en: Replaces the Help menu title in the Navbar with the system hostname or FQDN.
bs: Mijenja help meni sa sistemskim hostnameom ili FQDN.

en: Replaces the IP identification field of packets with random values to compensate for operating systems that use predictable values. This option only applies to packets that are not fragmented after the optional packet reassembly.
bs: Mijenja IP identifikaciono polje paketa sa nasumičnim vrijednostima za kompenzaciju operativnih sistema koji koriste predvidljive vrijednosti. Ova opcija se primjenjuje samo za pakete koji nisu fragmentirani nakon opcionalnog resastavljanja paketa.

en: Repository URL
bs: URL Repozitorija

en: Request Options
bs: Opcije zahtjeva

en: Request a IPv6 prefix/information through the IPv4 connectivity link
bs: Zahtijevaj IPv6 prefiks/informaciju kroz IPv4 link konektivnosti

en: Request only an IPv6 prefix
bs: Zahtijevaj samo IPv6 prefix

en: Request options
bs: Zatraži opcije

en: Require State Filter
bs: Zahtijevaj state filter

en: Require domain
bs: Zahtijeva domenu

en: Require options
bs: Potrebne opcije

en: Required by some ISPs, especially those not using PPPoE
bs: Neki ISPovi to zahtijevaju, posebno oni koji ne koriste PPPoE

en: Required for full functionality of the pure NAT mode of NAT Reflection for port forwards or NAT Reflection for 1:1 NAT. Note: This only works for assigned interfaces.  Other interfaces require manually creating the outbound NAT rules that direct the reply packets back through the router.
bs: Potrebno za punu funkcionalnost čistog NAT načina NAT reflekcije za port forwardanje ili NAT reflekcije za 1:1 NAT. Napomena: Ovo samo funkcioniše za dodijeljene interfaceove. Ostali interfejsi trebaju ručno kreiranje vanopsežnih NAT pravila koji će usmjeriti pakete odgovora nazad kroz router.

en: Required to support international characters, but may not be supported by every LDAP server.
bs: Potrebno za podršku međunarodnih karaktera, ali moguće da ne bude podržano na svakom LDAP serveru.

en: Requires Windows 10 and OpenVPN 2.3.9 or later. Only Windows 10 is prone to DNS leakage in this way, other clients will ignore the option as they are not affected.
bs: Zahtijeva Windows 10 i OpenVPN 2.3.9 ili više. Samo Windows 10 je sklon DNS curenjima na ovaj način, ostali klijenti će ignorisati opciju jer svakako nisu obuhvaćeni.

en: Rescan
bs: Ponovno skeniranje

en: Rescan has been initiated in the background. Refresh this page in 10 seconds to see the results.
bs: Ponovno skeniranje je pokrenuto u pozadini. Osvježite ovu stranicu za 10 sekundi da vidite rezultate.

en: Reserved Networks
bs: Rezervisane mreže

en: Reserved%sNot assigned by IANA
bs: Rezervisano%sNije dodijeljeno IANAom

en: Reserves a range in each voucher to store a simple checksum over Roll # and Ticket#. Allowed range is 0..31.
bs: Rezervira dometu kojem svaki vaučer spašava jednostavnu checksum-u preko Roll # i tiket #. Dozvoljen domet je 0..31.

en: Reserves a range in each voucher to store the Roll # it belongs to. Allowed range: 1..31. Sum of Roll+Ticket+Checksum bits must be one Bit less than the RSA key size.
bs: Rezervira domet u svakom vaučeru za spašavanje Rolla # kojem pripada. Dozvoljen domet: 1..31. Suma Rolla + Ticket + Checksum biti moraju biti bar jedan bitmanji od veličine RSA ključa.

en: Reserves a range in each voucher to store the Ticket# it belongs to. Allowed range: 1..16. Using 16 bits allows a roll to have up to 65535 vouchers. A bit array, stored in RAM and in the config, is used to mark if a voucher has been used. A bit array for 65535 vouchers requires 8 KB of storage.
bs: Rezervira domet u kojem svaki vaučer spašava #Tiketa kojem pripada. Dozvoljen domet: 1..16. Koristeći 16 bita dozvoljava rollu da ima do 65535 vaučera. Bit niz, sačuvan u RAMu i u konfiguraciji je korišten za označavanje da li je vaučer iskorišten. Bit niz za 65535 vaučera zahtijeva 8KB memorije.

en: Reset
bs: Resetuj

en: Reset All States
bs: Resetuj Sva Stanja

en: Reset CARP Demotion Status
bs: Poništi CARP demotion status

en: Reset Date/Time
bs: Resetuj Datum/Vrijeme

en: Reset Log Files
bs: Resetuj Log Fajlove

en: Reset States
bs: Resetuj stanja

en: Reset all states if WAN IP Address changes
bs: Resetuj sva stranja ako se WAN IP Adresa promjeni

en: Reset at each day ("0 0 * * *")
bs: Resetuj svakog dana ("0 0 * * *")

en: Reset at each hour ("0 * * * *")
bs: Resetuj svakog sata ("0 * * * *")

en: Reset at each month ("0 0 1 * *")
bs: Resetuj svakog mjeseca ("0 0 1 * *")

en: Reset at each week ("0 0 * * 0")
bs: Resetuj svake sedmice ("0 0 * * 0")

en: Reset firewall source tracking
bs: Poništi firewall izvor praćenja

en: Reset frequency
bs: Frekvencija resetovanja

en: Reset the firewall state table
bs: Poništi firewall tablicu stanja

en: Reset to factory defaults
bs: Vrati na tvorničke postavke

en: Reset waiting period
bs: Resetuj period čekanja

en: Resetting the source tracking table will remove all source/destination associations. This means that the "sticky" source/destination association will be cleared for all clients.%sThis does not clear active connection states, only source tracking.
bs: Resetovanje izvorne tablice stanja će ukloniti sve izvorne/destinacijske asocijacije. Ovo znači da će "sticky" izvorne/destinacijske asocijacije biti očišćene za sve klijente.%sOvo ne čisti aktivna stanja konekcije, samo izvorno praćenje.

en: Resetting the state tables will remove all entries from the corresponding tables. This means that all open connections will be broken and will have to be re-established. This may be necessary after making substantial changes to the firewall and/or NAT rules, especially if there are IP protocol mappings (e.g. for PPTP or IPv6) with open connections.%1$sThe firewall will normally leave the state tables intact when changing rules.%2$s%3$sNOTE:%4$s Resetting the firewall state table may cause the browser session to appear hung after clicking &quot;Reset&quot;. Simply refresh the page to continue.
bs: Resetovanje tablica stanja će ukloniti sve unose iz odgovarajućih tablica. Ovo znači da će sve otvorene konekcije biti prekinute i treba ih ponovno uspostaviti. Ovo će biti potrebno nakon vršenja određenih promjena u firewall i/ili NAT pravilima, posebno ako su IP protokol mapinzi (npr. za PPTP ili IPv6) sa otvorenim konekcijama.%1$sFirewall će normalno ostaviti tablicu stanja netaknutom kada mijenja pravila.%2$s%3$sNAPOMENA:%4$s Resetovanje firewall tablice stanja može uzrokovati da browser sesija bude nepostojeća nakon klikanja &quot;Reset&quot; Jednostavno osvježite stranicu za nastavak.

en: Resetting the system to factory defaults will remove all user configuration and apply the following settings:
bs: Vraćanje sistema na tvorničke zadane postavke će ukloniti sve korisničke konfiguracije i primijeniti sljedeće postavke:

en: Resolve
bs: Razriješi

en: Resolve DHCP mappings first
bs: Razriješi DHCP mapiranja prvo

en: Resolve names
bs: Resolve imena

en: Responder Only
bs: Samo odgovaranje

en: Restart %sService
bs: Restartuj %sServis

en: Restore Backup
bs: Vrati sigurnosnu kopiju

en: Restore Configuration
bs: Vrati konfiguraciju

en: Restore Default Page
bs: Vrati zadanu stranicu

en: Restore area
bs: Vrati područje

en: Restore serial console enabling in configuration.
bs: Vrati serijsko uključivanje konzole u konfiguraciji.

en: Restored %s of config file (maybe from CARP partner)
bs: Vratio %s konfig fajla (možda sa CARP partnera)

en: Restricted Regional Service
bs: Zabranjena regionalna usluga

en: Restricted Service
bs: Zabranjena usluga

en: Result
bs: Rezultat

en: Result Match
bs: Rezultno poklapanje

en: Result did not match.
bs: Rezultat se nije poklopio

en: Results
bs: Rezultati

en: Resyncing OpenVPN for gateway group %1$s client %2$s.
bs: Ponovno sinhronizovanje OpenVPN za gateway grupu %1$s klijent %2$s.

en: Resyncing OpenVPN for gateway group %1$s server %2$s.
bs: Ponovno sinhronizovanje OpenVPN za gateway grupu %1$s server %2$s.

en: Resyncing OpenVPN instances for interface %s.
bs: Ponovno sinhronizovanje OpenVPN instanci za interface %s.

en: Resyncing OpenVPN instances.
bs: Ponovno sinhronizovanje OpenVPN instanci.

en: Resyncing configuration for all packages.
bs: Ponovno sinhroniziranje svih paketa.

en: Retrieving
bs: Preuzimanje

en: Retrieving CPU data %s
bs: Preuzimanje podataka o procesoru %s

en: Retrieving interface data
bs: Preuzimanje podataka o interfejsu

en: Retrieving mobile data
bs: Preuzimanje mobilnih podataka

en: Retrieving overview data
bs: Preuzimanje podataka o pregledu

en: Retrieving tunnel data
bs: Preuzimanje podataka o tunelu

en: Retry
bs: Pokušaj ponovo

en: Return to the dashboard
bs: Vrati se na kontrolnu tablu

en: Reverse
bs: Unazad

en: Reverse Address Lookup
bs: Traženje obrnute adrese

en: Reverse DNS Lookup
bs: Obrnuto DNS traženje

en: Reverse Resolve with DNS
bs: Razrješavanje unazad sa DNSom

en: Revert config
bs: Vraćanje postavki

en: Reverted to %s.
bs: Vraćeno na %s

en: Revocation Reason
bs: Razlog ukinuća

en: Revoked
bs: Ukinut

en: Revoked At
bs: Obesnaženo na

en: Role
bs: Uloga

en: Roll number %s already exists.
bs: Roll broj %s već postoji.

en: Roll number must be numeric and less than %s
bs: Roll broj mora biti numerička vrijednost i manji od %s

en: Root Path
bs: Root putanja

en: Root path
bs: Root putanja

en: Round Robin with Sticky Address
bs: Round Robin sa Sticky Adresama

en: Round Robin: Loops through the translation addresses.
bs: Round Robin: Vrti kroz translacijske adrese.

en: Rounding up to the nearest whole number will yield the resolution of loss reporting in percent. The default values provide a resolution of 1%.
bs: Zaokruživanje na sljedeći cijeli broj će doprinijeti rezoluciji vraćanja grešaka u procentima. Zadane vrijednosti daju rezoluciju od 1%.

en: Route53 API call failed
bs: Route53 API poziv nije uspio

en: Route53: Enter AWS Zone ID.%1$sDNSimple: Enter the Record ID of record to update.
bs: Route53: Unesite AWS ID zonu. %1$sDNSimple: Unesite ID unosa koji želite ažurirati.

en: Routed To
bs: Routan ka

en: Router Advertisement Daemon
bs: Router Daemon Reklama

en: Router Advertisements
bs: Router reklame

en: Router Only
bs: Samo router

en: Router Only - RA Flags [none], Prefix Flags [router]
bs: Router Samo - RA Oznake [none], Prefiksne Oznake [router]

en: Router advertisement
bs: Reklama routera

en: Router lifetime
bs: Životni vijek routera

en: Router lifetime must be an integer between 1 and 9000.
bs: Životni vijek routera mora biti cijeli broj između 1 i 9000.

en: Router renumbering
bs: Renumeracija routera

en: Router solicitation
bs: Traženje routera

en: Routes
bs: Rute

en: Routing
bs: Rutiranje

en: Routing Daemon Events (RADVD, UPnP, RIP, OSPF, BGP)
bs: Routing daemon eventova (RADVD, UPnP, RIP, OSPF, BGP)

en: Routing Table
bs: Routing tablica

en: Routing Table Display Options
bs: Tablica ruta opcije prikaza

en: Rows per page:
bs: Redova po stranici:

en: Rows to display
bs: Redovi za prikaz

en: Rule
bs: Pravilo

en: Rule %s
bs: Pravilo %s

en: Rule Information
bs: Informacije pravila

en: Rule Type
bs: Tip pravila

en: Rule that triggered this action
bs: Pravilo koje uključuje ovu radnju

en: Rules
bs: Pravila

en: Rules (Drag to Change Order)
bs: Pravila (povuci za mijenjanje redoslijeda)

en: Rules are evaluated on a first-match basis (i.e. the action of the first rule to match a packet will be executed).
bs: Pravila će biti izvršena na bazi prvog poklapanja (tj. radnja prvog pravila koja se poklapa sa paketom će biti izvršena).

en: Rules have been cleared and the daemon restarted.
bs: Pravila su očišćena i daemon se ponovo pokrenuo.

en: Run "net stop dnscache", "net start dnscache", "ipconfig /flushdns" and "ipconfig /registerdns" on connection initiation.
bs: Porkeni "net stop dnscache", "net start dnscache", "ipconfig/flushdns" i "ipconfig/registerdns" na početku konekcije.

en: Running
bs: Radi

en: Running last steps of %s installation.
bs: Pokrećem posljednje korake %s instalacije.

en: Running plugins
bs: Pokrećem plugine

en: Running plugins (pf)
bs: Pokrećem plugine (pf)

en: Running: %s
bs: Pokrenuto: %s

en: Russian
bs: Ruski

en: S.M.A.R.T. Capabilities
bs: S.M.A.R.T mogućnosti

en: S.M.A.R.T. is not supported on this system (%s).
bs: S.M.A.R.T. nije podržan na ovom sistemu (%s).

en: SA Manager
bs: SA menadžer

en: SADs
bs: SADovi

en: SHAPER: Could not create queue %1$s on interface %2$s because: %3$s
bs: SHAPER: Nije moguće kreirati red %1$s na interfaceu %2$s zbog: %3$s

en: SHAPER: no default queue specified for interface %s.
bs: SHAPER: nema zadanog reda za interface %s.

en: SIM PIN wait
bs: SIM PIN čekanje

en: SKIP
bs: PRESKOČI

en: SMTP Port of E-Mail server
bs: SMTP Port E-Mail servera

en: SMTP passwords must match
bs: SMTP lozinke se moraju poklapati

en: SMTP testing e-mail successfully sent
bs: SMTP test e-mail uspješno poslan

en: SNMP Daemon Settings
bs: SNMP Daemon postavke

en: SNMP Modules
bs: SNMP moduli

en: SNMP Service
bs: SNMP Servis

en: SNMP Trap Settings
bs: Postavke SNMP trapova

en: SNMP Trap String
bs: SNMP trap string

en: SNMP Traps Enable
bs: Uključi SNMP trapove

en: SNMP modules
bs: SNMP moduli

en: SPDs
bs: SPDovi

en: SSL Certificate
bs: SSL certifikat

en: STP Interfaces
bs: STP interfejsi

en: STP interface (%s) is not part of the bridge. Remove the STP interface to continue.
bs: STP interface (%s) nije dio bridgea. Uklonite STP interface za nastavak.

en: SWAP usage
bs: SWAP korištenje

en: Sample Server Configurations
bs: Predložne server konfiguracije

en: Sat
bs: Sub

en: Satellites
bs: Sateliti

en: Save
bs: Spasi

en: Save & Continue
bs: Spasi & nastavi

en: Save & Force Update
bs: Spasi & forsiraj ažuriranje

en: Save & Test
bs: Spasi & testiraj

en: Save / Load a File from the Filesystem
bs: Spasi / Učitaj fajl iz Fajl sistema

en: Save Xauth Password
bs: Spasi Xauth lozinku

en: Save config permission denied by the 'User - Config: Deny Config Write' permission for user '%s'.
bs: Dozvola snimanja konfiguracije odbijena od strane 'Korisnik - Konfiguracija: Onemogući Snimanje Konfiguracije' za korisnika '%s'.

en: Save dashboard layout
bs: Spasi izgled kontrolne ploče

en: Save mapping order
bs: Spasi redoslijed mapiranja

en: Save rule order
bs: Redoslijed snimanja pravila

en: Saved Cfg
bs: Spašena konfiguracija

en: Saved Dynamic DNS Filter via Dashboard.
bs: Spašen dinamički DNS filter preko kontrolne ploče.

en: Saved Filter Log Entries via Dashboard.
bs: Spašeni filter log unosi preko kontrolne ploče.

en: Saved IPsec Mobile Clients configuration.
bs: Spašena IPsec konfiguracija za mobilne klijente.

en: Saved IPsec advanced settings.
bs: Spašene IPsec napredne postavke.

en: Saved IPsec tunnel Phase 1 configuration.
bs: Spašena IPsec Tunel Phase 1 konfiguracija

en: Saved IPsec tunnel Phase 2 configuration.
bs: Spašen IPsec tunnel Phase2 konfiguracija

en: Saved Interface Statistics Filter via Dashboard.
bs: Spašena statistika o interfejs filteru preko kontrolne ploče. .

en: Saved Interfaces Filter via Dashboard.
bs: Spašen interfejs filter preko kontrolne ploče.

en: Saved OpenVPN Filter via Dashboard.
bs: Spašen OpenVPN filter preko kontrolne ploče.

en: Saved RSS Widget feed via Dashboard.
bs: Spašen RSS widget feed preko kontrolne ploče .

en: Saved SMART Status Filter via Dashboard.
bs: Spašen SMART status filter preko kontrolne ploče.

en: Saved Service Status Filter via Dashboard.
bs: Spašen servisni status filter preko kontrolne ploče.

en: Saved System Information Widget Filter via Dashboard.
bs: Spašene sistemske informacije o widget filteru preko kontrolne ploče

en: Saved Wake on LAN Filter via Dashboard.
bs: Spašen Wake on LAN filter preko kontrolne ploče

en: Saved configuration changes for IPsec tunnels.
bs: Spašene konfiguracijske promjene za IPsec tunele.

en: Saved static route configuration.
bs: Spašena konfiguracija statičke rute.

en: Saved static routes configuration.
bs: Spašena konfiguracija statičkih ruta.

en: Saved system update settings.
bs: Spašene postavke sistemskog ažuriranja.

en: Saved thermal_sensors_widget settings via Dashboard.
bs: Spašene postavke widgeta thermal_sensors_widget preko kontrolne ploče.

en: Saved/edited a virtual IP.
bs: Spašen/modifikovan virtualni IP.

en: Saves changed settings.
bs: Spašava promijenjene postavke.

en: Saving changes...
bs: Spašavanje promjena...

en: Saving output to archive...
bs: Spašavanje izlaza u arhivu

en: Saving updated package information...
bs: Spašavanje ažuriranih informacija o paketima...

en: Schedule
bs: Raspored

en: Schedule Information
bs: Informacije rasporeda

en: Schedule States
bs: Stanja rasporeda

en: Schedule is currently active
bs: Raspored je trenutno aktivan

en: Schedule may not be named LAN.
bs: Raspored se ne smije zvati LAN.

en: Schedule may not be named WAN.
bs: Raspored se ne smije zvati WAN.

en: Schedule name cannot be blank.
bs: Ime rasporeda ne smije biti prazno.

en: Scheduled Tasks
bs: Planirani zadaci

en: Scheduler Type
bs: Tip Organizatora

en: Scheduler option
bs: Opcije raspoređivača

en: Scheduler options
bs: Opcije organizatora

en: Scheduler specific options
bs: Specifične opcije raspoređivača

en: Schedules
bs: Rasporedi

en: Schedules act as placeholders for time ranges to be used in firewall rules.
bs: Rasporedi djeluju kao mjesto za čuvanje vremenskih intervala koji se trebaju koristiti u firewall pravilima.

en: Scripts
bs: Skripte

en: Scrolls with page
bs: Skrolaj sa stranicom

en: Search
bs: Pretraga

en: Search level
bs: Nivo pretrage

en: Search resulted in error: %s
bs: Pretraga je rezultirala greškom: %s

en: Search scope
bs: Opseg pretrage

en: Search term
bs: Pojam pretrage

en: Secondary 802.1X Authentication Server Port must be a valid port number (1-65535).
bs: Sekundarni 802.1X autentikacijski server port mora biti validan port broj (1-65535).

en: Secondary 802.1X Authentication Server must be an IP or hostname.
bs: Sekundarni 802.1X autentikacijski server mora biti IP ili hostname.

en: Secondary 802.1X server
bs: Sekundarni 802.1X server

en: Secondary Authentication Source
bs: Sekundarni izvor autentikacije

en: Secondary L2TP DNS server
bs: Sekundarni L2TP DNS server

en: Secondary RADIUS Server
bs: Sekundarni RADIUS server

en: Secondary RADIUS Server Shared Secret
bs: Sekundardna dijeljena tajna RADIUS servera

en: Secondary RADIUS server
bs: Sekundarni RADIUS server

en: Seconds
bs: Sekunde

en: Seconds. The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain preferred.%1$sThe default is 14400 seconds.
bs: Sekunde. Dužina vremena u sekundama (relativno vremenu kad je paket poslan) koje su adrese stvorile iz prefiksa preko adrese bez stanja i auto konfiguracije ostaju željeni. %1$s Zadano je 14400 sekundi.

en: Secret
bs: Tajna

en: Secret and confirmation must match
bs: Tajna i potvrda se moraju poklapati

en: Secure SMTP Connection
bs: Sigurna SMTP konekcija

en: Secure Shell
bs: Sigurni Shell

en: Secure Shell Daemon
bs: Sigurni Shell Daemon

en: Secure Shell Server
bs: Sigurni Shell Server

en: Security notice: This user effectively has administrator-level access
bs: Sigurnosna napomena: Ovaj korisnik efektivno ima pristup administratorskog nivoa.

en: Security notice: Users in this group effectively have administrator-level access
bs: Sigurnosna napomena: Korisnici u ovoj grupu efektivno imaju pristup nivoa administratora.

en: See "playback gitsync --help" in console "PHP Shell + pfSense tools" for additional information.
bs: Pogledajte "playback gitsync --help" u konzoli "PHP Shell + pfSense tools" za dodatne informacije.

en: See %1$shere%2$s more information
bs: Vidi %1$sovdje%2$s za više informacija

en: See the implementation %1$sdraft dns-0x20%2$s for more information.
bs: Pogledajte implementaciju %1$sdraft dns-0x20%2$s za više informacija.

en: Select
bs: Odaberi

en: Select "Conveyance" for ATA disks only.
bs: Odaberi "Conveyance" samo za ATA diskove.

en: Select LDAP containers for authentication
bs: Odaberite LDAP kontejnere za autentikaciju

en: Select a certificate authority previously configured in the Certificate Manager.
bs: Unesite certifikatni autoritet ranije konfigurisan u upravitelju certifikata.

en: Select a certificate previously configured in the Certificate Manager.
bs: Odaberite certifikat ranije konfigurisan u upravitelju certifikata.

en: Select a container
bs: Odaberite kontejner

en: Select a geographic region name (Continent/Location) to determine the timezone for the firewall. %1$sChoose a special or "Etc" zone only in cases where the geographic zones do not properly handle the clock offset required for this firewall.
bs: Odaberite ime geografske regije (Kontinent/Lokacija) da odredite vremensku zonu za firewall. %1$sOdaberite special ili "Etc" zonu samo u slučajevima kada geografske zone ne prate kašnjenje koje je potrebno za ovaj firewall da se uračuna.

en: Select a new password
bs: Odaberite novu lozinku

en: Select a privilege from the list above for a description
bs: Odaberi privilegiju sa liste za opis

en: Select a reset timing type
bs: Odaberite tip reset tajminga

en: Select a reset timing type.
bs: Odaberi vrstu tajming resetovanja

en: Select a user-defined alias name or system table name to view its contents. %sAliases become Tables when loaded into the active firewall ruleset. The contents displayed on this page reflect the current addresses inside tables used by the firewall.
bs: Odaberi korisnički definirano alias ime ili sistemsku tablicu za prikaz njenog sadržaja. %sAliasi postaju tablice kada su učitani u aktivni set pravila za firewall. Sadržaj prikazan na ovoj stranici reflektuje trenutne adrese u tablicama koje firewall koristi.

en: Select an Authentication Method to use for this zone. One method must be selected.
bs: Odaberite metodu autentikacije da koristite za ovu zonu. Jedna metoda mora biti selektovana.

en: Select at least two interfaces for Multilink (MLPPP) connections.
bs: Odaberi barem dva interfacea za Multilink (MLPPP) konekcije.

en: Select options for this queue
bs: Odaberi opcije za ovaj red

en: Select options to sync
bs: Odaberite opcije za sinhronizaciju

en: Select prefix interface
bs: Odaberite prefix interfejs

en: Select source address for the ping.
bs: Odaberite izvornu adresu za ping.

en: Select source address for the trace.
bs: Odaberi izvornu adresu za praćenje.

en: Select the Interface for the Router Advertisement (RA) Daemon.
bs: Odaberite interface za Router reklamiranje (RA) Daemon.

en: Select the Internet Key Exchange protocol version to be used. Auto uses IKEv2 when initiator, and accepts either IKEv1 or IKEv2 as responder.
bs: Odaberite verziju protokola internet zamjene ključa koja će se koristiti. Auto koristi IKEv2 kod inicijatora, i prihvata ili IKEv1 ili IKEv2 kao sredstvo odgovora.

en: Select the Internet Protocol family.
bs: Odaberite familiju internet protokola.

en: Select the Internet Protocol version this rule applies to.
bs: Odaberi verziju internet protokola za koji se ovo pravilo primjenjuje.

en: Select the Operating Mode for the Router Advertisement (RA) Daemon.
bs: Odaberite način rada za Ruter Reklamiranje (RA) Daemon.

en: Select the Priority for the Router Advertisement (RA) Daemon.
bs: Odaberite prioritet za Router reklamiranje (RA) Daemon

en: Select the authentication mechanism used by the SMTP server. Most work with PLAIN, some servers like Exchange or Office365 might require LOGIN.
bs: Odaberite autentikacijski mehanizam koji će SMTP server koristiti. Mora raditi sa PLAIN, nekim serverima poput Exchange ili Office 365 će biti potreban LOGIN.

en: Select the authentication server to test against.
bs: Odaberi autentikacijski server za testiranje.

en: Select the interface for the local endpoint of this phase1 entry.
bs: Odaberite interface za lokalnu krajnju tačku ovog phase1 unosa.

en: Select the interface on which to apply the prefix delegation.
bs: Odaberite interfejs na koji će prefiks deleacija biti urađena.

en: Select the interface on which to capture traffic.
bs: Odaberi na kojem interfaceu će se izvršiti snimanje saobraćaja.

en: Select the interface(s) to enable for captive portal.
bs: Odaberi interfaceove za uključivanje za zabranjeni portal

en: Select the log verbosity.
bs: Unesi preopširnost loga

en: Select the maximum number of network hops to trace.
bs: Odaberi maksimalan broj mrežnih skokova za praćenje.

en: Select the maximum number of pings.
bs: Odaberite maksimalan broj pingova.

en: Select the preferred console if multiple consoles are present. The preferred console will show pfSense boot script output. All consoles display OS boot messages, console messages, and the console menu.
bs: Odaberite preferiranu konzolu ako ih je više prisutno. Preferirana će prikazati izlaz boot skripte pfSense-a. Sve konzole prikazuju OS boot poruke, konzolne poruke i konzolni meni.

en: Select the protocol to capture, or "Any".
bs: Odaberi snimanje protokola, ili "Any".

en: Select the protocol to use.
bs: Odaberite protokol za korištenje.

en: Select the servers that will utilize this override. When no servers are selected, the override will apply to all servers.
bs: Odaberite servere koji će koristiti ovaj override. Kada nijedan server nije selektovan, override će se primijeniti za sve servere.

en: Select the time range for the day(s) selected on the Month(s) above. A full day is 0:00-23:59.
bs: Odaberite vremenski interval za dan(e) izabrane na mjesecima iznad. Cijeli dan je 0:00-23:59.

en: Select the type of state table optimization to use
bs: Odaberite tip tablice stanja koju će optimizacija koristiti

en: Select the type of traffic to be captured.
bs: Odredi tip prometa koji će se snimati

en: Select timeout
bs: Odaberi timeout

en: Select to fill in service provider data.
bs: Odaberi za popunjavanje podataka servisnog provajdera

en: Select which type of state tracking mechanism to use.  If in doubt, use keep state.%1$s
bs: Odaberi tip stanja koje tracking mehanizam koristi. Ako imate sumnju, koristite stanje zadržavanja. %1$s

en: Selected
bs: Selektovan

en: Selected groups removed successfully.
bs: Selektovane grupe uspješno uklonjene.

en: Selected privileges
bs: Odabrane privilegije

en: Selects the dynamic IPv6 WAN interface to track for configuration.
bs: Selektuje dinamički IPv6 WAN interface za praćenje konfiguracije.

en: Self-test
bs: Testiranje samog sebe

en: Send
bs: Pošalji

en: Send IPv6 prefix hint
bs: Pošalji IPv6 prefiks hint

en: Send RADIUS accounting packets to the primary RADIUS server.
bs: Pošalji RADIUS računanje paketa primarnom RADIUS serveru

en: Send WOL packet
bs: Pošalji WOL paket

en: Send a gratuitous DHCP release packet to the server.
bs: Pošalji DHCP paket serveru

en: Send an IPv6 prefix hint to indicate the desired prefix size for delegation
bs: Pošalji IPv6 prefix hint za pokazivanje željene prefix veličine

en: Send log messages to remote syslog server
bs: Šalji log poruke udaljenom syslog serveru

en: Send options
bs: Opcije slanja

en: Send/Expect
bs: Pošalji/Očekuj

en: Send/Expect Options
bs: Pošalji/Očekuj opcije

en: Send/Receive Buffer
bs: Pošalji/Primi buffer

en: Sending of IPv4 ICMP redirects
bs: Slanje IPv4 ICMP redirektova

en: Sending of IPv6 ICMP redirects
bs: Slanje IPv6 ICMP redirektova

en: Sending request to: %s
bs: Šaljem zahtjev: %s

en: Sends accounting packets to the RADIUS server.
bs: Šalje pakete za računanje RADIUS serveru.

en: Sends and receives traffic only through the master port.  If the master port becomes unavailable, the next active port is used.	The first interface added is the master port; any interfaces added after that are used as failover devices.
bs: Šalje i

en: Sent magic packet to %1$s (%2$s).
bs: Pošalji magični paket ka %1$s (%2$s).

en: Sent magic packet to %s.
bs: Pošalji magični paket ka %s.

en: September
bs: Septembar

en: Serial
bs: Serijski

en: Serial Communications
bs: Serijske komunikacije

en: Serial Console
bs: Serijska konzola

en: Serial GPS
bs: Serijski GPS

en: Serial Port
bs: Serijski port

en: Serial Speed
bs: Serijska brzina

en: Serial Terminal
bs: Serijski terminal

en: Serial for next certificate
bs: Serijski za sljedeći certifikat

en: Serial:
bs: Serijski:

en: Server Bridge DHCP End
bs: Server bridge DHCP kraj

en: Server Bridge DHCP End must be an IPv4 address.
bs: Server bridge DHCP kraj mora biti IPv4 adresa.

en: Server Bridge DHCP Start
bs: Server bridge DHCP start

en: Server Bridge DHCP Start and End must both be empty, or defined.
bs: Server bridge DHCP početak i kraj moraju oba biti prazna, ili definisana.

en: Server Bridge DHCP Start must be an IPv4 address.
bs: Server bridge DHCP početak mora biti IPv4 adresa.

en: Server Definitions
bs: Serverske definicije

en: Server IP Address
bs: IP adresa servera

en: Server List
bs: Lista servera

en: Server Load Balancer Events (relayd)
bs: Server balanser učitanih eventova (relayd)

en: Server Name
bs: Ime servera

en: Server Settings
bs: Server postavke

en: Server Time
bs: Serversko vrijeme

en: Server Timeout
bs: Timeout servera

en: Server address
bs: Adresa servera

en: Server auth port. Default is 1812
bs: Serverski autentikacijski port. Zadani je 1812

en: Server load balancing daemon
bs: Serversko opterećenje balansirajući daemon

en: Server side error.
bs: Greška na server strani.

en: Server successfully deleted.
bs: Server uspješno obrisan

en: Server: NO
bs: Server: NE

en: Server: Yes
bs: Server: Da

en: Servers
bs: Serveri

en: Service
bs: Servis

en: Service %1$s/%2$s: %3$s
bs: Servis %1$s/%2$s: %3$s

en: Service Curve (sc)
bs: Servisna kriva (sc)

en: Service name
bs: Ime servisa

en: Service not running?
bs: Servis nije pokrenut?

en: Service type
bs: Tip servisa

en: Services
bs: Servisi

en: Services &gt; UPnP &amp; NAT-PMP
bs: Servisi &gt; UPnP &amp; NAT-PMP

en: Services Status
bs: Servisni status

en: Services...
bs: Usluge...

en: Session details
bs: Detalji sesije

en: Session duration: %s
bs: Trajanje sesije: %s

en: Session start
bs: Početak sesije

en: Session time left: %s
bs: Preostalo vrijeme sesije: %s

en: Session timed out for user '%1$s' from: %2$s
bs: Istekla sesija za korisnika '%1$s' sa: %2$s

en: Session timeout
bs: Timeout sesije

en: Session timeout must be an integer value.
bs: Istek sesije mora biti cijeli broj.

en: Set ICMP Limits
bs: Postavi ICMP limite

en: Set interface as an edge port. An edge port connects directly to end stations and cannot create bridging loops in the network; this allows it to transition straight to forwarding.
bs: Postavi interface kao edge port. Edge port se direktno spaja na krajnje stanice i ne može stvoriti bridge petlje u mreži; ovo mu dozvoljava tranziciju odmah na forwardanje.

en: Set the Spanning Tree path cost of interface to value. The default is calculated from the link speed. To change a previously selected path cost back to automatic, set the cost to 0. The minimum is 1 and the maximum is 200000000.
bs: Postavi prioritet interfacea razapinjujućeg stabla po vrijednosti. Zadana vrijednost se računa iz brzine linka. Za promjenu težine prethodno označenog puta nazad na automatsku vrijednost, postavi cijenu na 0. Minimum je 1 i maksimum je 200000000.

en: Set the Spanning Tree priority of interface to value. The default is 128. The minimum is 0 and the maximum is 240. Increments of 16.
bs: Postavi prioritet interfacea razapinjujućeg stabla po vrijednosti. Zadano je 128. Minimum je 0 a maksimum 240. Povećava se za 16.

en: Set the TOS IP header value of tunnel packets to match the encapsulated packet value.
bs: Postavi TOS IP vrijednost naslova tunel paketa da se poklapa sa enkapsuliranom paketnom vrijednosti.

en: Set the bridge priority for Spanning Tree. The default is 32768. The minimum is 0 and the maximum is 61440.
bs: Postavi bridge prioritet za razapinjujuće stablo. Zadano je 32768. Minimum je 0 i maksimum je 61440.

en: Set the global timeout in milliseconds for checks. Leave blank to use the default value of 1000 ms.
bs: Postavi globalni timeout u milisekundama za provjere. Ostavite prazno ako želite zadanu vrijednost od 1000 ms.

en: Set the interface as a point-to-point link. This is required for straight transitions to forwarding and should be enabled on a direct link to another RSTP-capable switch.
bs: Postavi interface kao point-to-point vezu. Ovo je potrebno za tranzicije za forwardanje i trebalo bi biti uključeno na direktnoj vezi sa drugim RSTP-dostupnim prekidačem.

en: Set the interval in seconds at which the member of a pool will be checked. Leave blank to use the default interval of 10 seconds.
bs: Postavite interval u sekundama u kojem će članovi poola biti čekirani. Ostavite prazno ako želite da koristite zadanu vrijednost od 10 sekundi.

en: Set the size of the bridge address cache. The default is 2000 entries.
bs: Postavi veličinu bridge adresnog keša. Zadana je 2000 unosa.

en: Set the source tracking timeout for sticky connections. By default this is 0, so source tracking is removed as soon as the state expires. Setting this timeout higher will cause the source/destination relationship to persist for longer periods of time.
bs: Postavi izvorni timeout praćenja za sticky konekcije. Zadano je ovo 0, tako da je izvorno praćenje uklonjeno odmah pri isteku stanja. Postavljanje ove opcije na veću vrijednost će uzrokovati da izvorna/destinacijska veza opstane duži vremenski period.

en: Set the time in seconds between broadcasting of Spanning Tree Protocol configuration messages. The hello time may only be changed when operating in legacy STP mode. The default is 2 seconds. The minimum is 1 second and the maximum is 2 seconds.
bs: Postavi vrijeme u sekundama između prenosa protokola razapinjujućeg stabla i konfiguracijskih poruka istog. Hello vrijeme može biti promijenjeno samo kad operišemo u legacy STP modu. Zadano je 2 sekunde. Minimum je 1 sekunda i maksimum 2 sekunde.

en: Set the time that a Spanning Tree Protocol configuration is valid. The default is 20 seconds. The minimum is 6 seconds and the maximum is 40 seconds.
bs: Postavi vrijeme da protokol razapinjujućeg stabla  bude validan. Zadano je 20 sekundi. Minimum je 6 sekundi a maksimum je 40.

en: Set the time that must pass before an interface begins forwarding packets when Spanning Tree is enabled. The default is 15 seconds. The minimum is 4 seconds and the maximum is 30 seconds.
bs: Postavi vrijeme koje mora proći prije nego interface počinje forwardati pakete kada se razapinjujuće stablo uključi. Zadano je 15 sekundi. Minimum je 4 sekunde i maksimum je 30 sekundi.

en: Set the timeout of address cache entries to this number of seconds. If seconds is zero, then address cache entries will not be expired. The default is 1200 seconds.
bs: Postavi vrijeme isteka unosa adresnog keša za ovaj broj sekundi. Ako je ovaj broj sekundi jednak nuli, tada adresni keš unosi neće isteći. Zadano je 1200 sekundi.

en: Set the transmit hold count for Spanning Tree. This is the number of packets transmitted before being rate limited. The default is 6. The minimum is 1 and the maximum is 10.
bs: Postavi prenos brojača držanja za razapinjujuće stablo. Ovo je broj paketa prenesen prije nego se limitira odnos. Zadano je 6. Minimum je 1 a maksimum je 10.

en: Set this option to apply this action to traffic that matches this rule immediately.
bs: Postavi ovu opciju za primjenu ove radnje na promet koji se poklapa sa ovim pravilom odmah.

en: Set this option to bind to a specific port. Leave this blank or enter 0 for a random dynamic port.
bs: Postavite ovu opciju za dodjelu specifičnom portu. Ostavite prazno ili unesite 0 za nasumični dinamički port.

en: Set this option to control the use of MOBIKE
bs: Uključite ovu opciju za kontrolu MOBIKE

en: Set this option to disable this client without removing it from the list.
bs: Postavite ovu opciju za isključivanje ovog klijenta bez njegovog uklanjanja sa liste.

en: Set this option to disable this client-specific override without removing it from the list.
bs: Postavite ovu opciju za isključivanje ovog klijentno specifičnog overridea bez njegovog uklanjanja sa liste.

en: Set this option to disable this gateway without removing it from the list.
bs: Postavi ovu opciju da isključi ovaj gejtvej bez njegovog uklanjanja sa liste.

en: Set this option to disable this phase1 without removing it from the list.
bs: Postavi ovu opciju za isključivanje ovog phase1 bez njegovog uklanjanja sa liste.

en: Set this option to disable this rule without removing it from the list.
bs: Postavi ovu opciju da isključiš ovo pravilo bez njegovog sklanjanja sa liste.

en: Set this option to disable this server without removing it from the list.
bs: Postavite ovu opciju za isključivanje ovog servera bez njegovog uklanjanja sa liste.

en: Set this option to disable this static route without removing it from the list.
bs: Postavite ovu opciju za isključivanje statičke rute bez njenog uklanjanja sa liste.

en: Set this option to enable the use of NAT-T (i.e. the encapsulation of ESP in UDP packets) if needed, which can help with clients that are behind restrictive firewalls.
bs: Potavi ovu opciju za uključivanje NAT-T (tj. enkapsulacije ESP u UDP pakete) ako je potrebno, što može pomoći klijentima koji su iza restriktivnih firewalla.

en: Set this to use /tmp and /var as RAM disks (memory file system disks) on a full install rather than use the hard disk. Setting this will cause the data in /tmp and /var to be lost. RRD, DHCP leases and log directory will be retained. Changing this setting will cause the firewall to reboot after clicking "Save".
bs: Postavi ovo da koristi /tmp i /var kao RAM diskove (memorijske fajl sistem diskove) na punoj instalaciji radije nego hard disk. Postavka će imati efekt da podaci u /tmp i /var se izgube. RRD, DHCP posudbe i log direktorij će biti zadržani. Mijenjanje ove postavke će uticati na to da će se firewall ponovo pokrenuti nakon klika na dugme "Spasi".

en: Sets the interval, in hours, to periodically backup these portions of RAM disk data so they can be restored automatically on the next boot. Keep in mind that the more frequent the backup, the more writes will happen to the media.
bs: Postavlja interval, u satima, kojim će se periodički raditi sigurnosne kopije ovih dijelova RAM disk podataka tako da mogu biti vraćeni automatski na sljedećem bootu. Zapamtite da što češći backup traži sve češće pisanje na podacima.

en: Sets the size, in MiB, for the RAM disks.
bs: Postavlja veličinu u MiB za RAM diskove.

en: Setting default NTPd settings
bs: Postavljanje zadanih NTPd postavki

en: Setting hard disk standby...
bs: Postavljenje hard disk standbya...

en: Setting this option will force pfsync to synchronize its state table to this IP address. The default is directed multicast.
bs: Postavljanjem ove opcije forsirate pfsync da sinhronizira svoju tablicu stanja sa ovom IP adresom. Zadano je usmjereni multicast.

en: Setting timezone...
bs: Postavljam vremensku zonu...

en: Setting up SCRUB information
bs: Postavljanje SCRUB informacija

en: Setting up TFTP helper
bs: Postavljanje TFTP pomoći

en: Setting up logging information
bs: Postavljane informacija za logovanje

en: Setting up pass/block rules
bs: Postavljanje pass/block pravila

en: Setting up pass/block rules %s
bs: Postavljanje pass/block pravila %s

en: Setting up route with %1$s on %2$s
bs: Postavljanje puta sa %1$s na %2$s

en: Settings
bs: Postavke

en: Settings have been saved, but the test was not performed because it is not supported for local databases.
bs: Postavke su spašene ali test nije izvršen jer nije podržan za lokalne baze podataka.

en: Settings have been saved, but the test was not performed because it is supported only for LDAP based backends.
bs: Postavke su spašene ali test nije izvršen jer je podržan jedino za LDAP backendove.

en: Setup Wizard
bs: Čarobnjak za postavke

en: Shadow
bs: Sjena

en: Shaper configuration saved via pfSense traffic shaper wizard.
bs: Konfiguracija oblikovatelja spašena preko pfSense oblikovatelja prometa.

en: Shared Secret
bs: Dijeljena tajna

en: Shared key
bs: Dijeljeni ključ

en: Short
bs: Kratko

en: Should VLANs be set up now [y|n]?
bs: Da li VLANovi trebaju biti postavljeni sada [y|n]?

en: Show
bs: Prikaži

en: Show Advanced Options
bs: Prikaži napredne opcije

en: Show Command
bs: Prikaži komandu

en: Show Files
bs: Prikaži fajlove

en: Show Last Activity
bs: Prikaži posljednju aktivnost

en: Show Phase 2 Entries (%s)
bs: Prikaži Phase 2 Unose (%s)

en: Show Routing Table
bs: Prikaži routing tablicu

en: Show active and static leases only
bs: Prikaži aktivne i statičke posudbe samo

en: Show all configured leases
bs: Prikaži sve konfigurisane posudbe

en: Show all items on help menu and allow access to Help shortcut links
bs: Prikaži sve predmete na help meniju i dozvoli pristup Help kratičnim linkovima

en: Show all socket connections
bs: Prikaži sve socket konekcije

en: Show child SA entries
bs: Prikaži SA unose djece

en: Show constructed command.%1$sWith 'Diff/Minimal' option.
bs: Prikaži stvorenu komandu. %1$sSa Diff/Minimal opcijom.

en: Show different and missing files.%1$sWith 'Diff/Minimal' option..
bs: Prikaži različite i drugačije fajlove. %1$sSa 'Diff/Minimal' opcijom...

en: Show full sensor name
bs: Prikaži puno ime senzora

en: Show hostname on login banner
bs: Prikaži hostname na login banneru

en: Show last activity
bs: Prikaži posljednju aktivnost

en: Show log entries in forward or reverse order.
bs: Prikaži log unose unaprijed ili unazad.

en: Show log entries in reverse order (newest entries on top)
bs: Prikaži log unose u obrnutom poretku (posljednji unosi na vrhu)

en: Show only listening sockets
bs: Prikaži samo sockete koje pratim

en: Show only the choices containing this term
bs: Prikaži samo izbore koji sadrže ovaj pojam

en: Show raw filter logs
bs: Prikaži sirove filter logove

en: Show raw output
bs: Prikaži sirovi izlaz

en: Show remote text
bs: Prikaži udaljeni tekst

en: Show states
bs: Prikaži stanja

en: Show table comments.
bs: Prikaži komentare tablice

en: Show the Available Widgets panel on the Dashboard.
bs: Prikaži dostupne widgete na kontrolnoj tabli.

en: Show the Log Filter panel in System Logs.
bs: Prikaži log filter panel u sistemskim logovima.

en: Show the Manage Log panel in System Logs.
bs: Prikaži log manage panel u sistemskim logovima.

en: Show the Settings panel in Status Monitoring.
bs: Prikaži panel postavki u monitoringu statusa.

en: Show the applied rule description below or in the firewall log rows.%1$sDisplaying rule descriptions for all lines in the log might affect performance with large rule sets.
bs: Prikaži opis primijenjenog pravila ispod ili u firewall log redovima.%1$sPravilo prikazivanja opisa za sve linije u logu može uticati na performanse sa velikim setovima pravila.

en: Show the log entries as formatted or raw output as generated by the service. The raw output will reveal more detailed information, but it is more difficult to read.
bs: Prikaži log unose kao formatirane ili sirove izlaze koji su generisani servisom. Sirovi izlaz će otkriti detaljnije informacije, ali je teže za čitati.

en: Shows the text given by the server when connecting to the port. If checked it will take 10+ seconds to display in a panel below this form.
bs: Prikazuje tekst dat od strane servera prilikom spajanja na port. Ako je selektovan bit će potrebno 10+ sekundi za prikaz u prostoru ispod ovog.

en: Shutting down Router Advertisment daemon cleanly
bs: Ugasi ruter reklamiranje daemona čisto

en: Sign CSR
bs: Verifikuj/Potpiši CSR

en: Sign a Certificate Signing Request
bs: Potvrdi zahtjev za verifikaciju certifikata

en: Signed 16-bit integer
bs: Standardan 16-bitni cijeli broj

en: Signed 16-bit integer type must be a number in the range -32768 to 32767.
bs: Standardni 16-bitni cijelobrojni tip mora biti broj u intervalu -32768 do 32767.

en: Signed 32-bit integer
bs: Standardan 32-bitni cijeli broj

en: Signed 32-bit integer type must be a number in the range -2147483648 to 2147483647.
bs: Standardni 8-bitni cijelobrojni tip mora biti broj u intervalu -2147483648 do 2147483647.

en: Signed 8-bit integer
bs: Standardan 8-bitni cijeli broj

en: Signed 8-bit integer type must be a number in the range -128 to 127.
bs: Standardni 8-bitni cijelobrojni tip mora biti broj u intervalu -128 do 127.

en: Signing Certificate Authority
bs: Potpisivanje autoritativnog certifikata

en: Signing request data
bs: Zahtjev za verifikaciju podataka

en: Silent
bs: Tiho

en: Since
bs: Od

en: Single address
bs: Jedna adresa

en: Single dash
bs: Jedna crta

en: Single host
bs: Jedan host

en: Single host or alias
bs: Jedan host ili alias

en: Sitedown pool for VS: %s
bs: Sitedown pool za VS: %s

en: Size
bs: Veličina

en: Size of the message cache. The message cache stores DNS response codes and validation statuses. The Resource Record Set (RRSet) cache will automatically be set to twice this amount. The RRSet cache contains the actual RR data. The default is 4 megabytes.
bs: Veličina keša poruka. Poruka spašava kodove DNS odgovora i validacijske statuse. Resursni Set Podataka (RRSet) keš će automatski biti postavljen na dvostruku ovu vrijednost. RRSet keš sadrži RR podatke i zadana vrijednost je 4 megabajta.

en: Skew
bs: Kosina

en: Skip RRD data
bs: Preskoči RRD podatke

en: Skip packages
bs: Preskoči pakete

en: Skip rules when gateway is down
bs: Preskoči pravila kada je gateway pao.

en: Sloppy
bs: Nemarno

en: Socket Information
bs: Socket informacije

en: Sockets
bs: Socketi

en: Some cards have a default that is not recognized and require changing the regulatory domain to one in this list for the changes to other regulatory settings to work
bs: Neke kartice imaju zadane vrijednosti koje nisu prepoznate i zahtijevaju mijenjanje regulatorne domene na jednu od ovih iz liste promjena da bi druge regulatorne postavke radile.

en: Some disk operations may only be performed when there are multiple consumers present in a mirror.
bs: Neke disk operacije mogu biti izvršene samo kada je više korisnika prisutno u mirroru.

en: Some implementations send the third Main Mode message unencrypted, probably to find the PSKs for the specified ID for authentication. This is very similar to Aggressive Mode, and has the same security implications: A passive attacker can sniff the negotiated Identity, and start brute forcing the PSK using the HASH payload. It is recommended to keep this option to no, unless the exact implications are known and compatibility is required for such devices (for example, some SonicWall boxes).
bs: Neke implementacije šalju treću main način poruku neenkriptovanu, vrlo vjerovatno za traženje PSKova za specificirani ID autentikacije. Ovo je vrlo slično Agresivnom načinu te ima iste implikacije sigurnosti: Pasivan napadač može posmatrati identitet i početi brute forceati PSK koristeći HASH teret. Preporučeno je ostaviti ovu opciju na ne, osim ako tačne implikacije su poznate te kompatibilnost je neophodna za takve uređaje (na primjer neki SonicWall boksovi).

en: Something wrong happened during communication with stat gathering.
bs: Nešto pogrešno se desilo tokom komunikacije sa serverom za prikupljanje statistike.

en: Sorry, an alias is already named %s.
bs: Oprostite, već postoji alias pod nazivom %s

en: Sorry, an alias with the name %s already exists.
bs: Oprostite, alias sa imenom %s već postoji.

en: Sorry, an interface group with the name %s already exists.
bs: Oprostite, interface grupa sa imenom %s već postoji.

en: Sorry, an interface group with this name already exists.
bs: Oprostite, interface grupa sa ovim imenom već postoji.

en: Sort Alphabetically
bs: Sortiraj po alfabetu

en: Sort by
bs: Sortiraj po

en: Sounds
bs: Zvukovi

en: Source
bs: Izvor

en: Source (Original Source) -> Destination (Original Destination)
bs: Izvor (Originalni izvor) -> Destinacija (Originalna destinacija)

en: Source -> Destination
bs: Izvor -> Destinacija

en: Source Address
bs: Izvorna adresa

en: Source Hash Key
bs: Izvorni heš ključ

en: Source Hash: Uses a hash of the source address to determine the translation address, ensuring that the redirection address is always the same for a given source.
bs: Izvorni heš: Koristi heš izvorne adrese za odlučivanje translacije adrese kako bi bili sigurni da je adresa redirekcije uvijek ista za zadani izvor.

en: Source IP
bs: Izvorni IP

en: Source IP Address
bs: Izvorna IP adresa

en: Source IP address for queries to the DNS server for the override domain. Leave blank unless the DNS server is accessed through a VPN tunnel.
bs: Izvorna IP adresa za upite ka DNS serverima za override domene. Ostavite prazno osim ako se pristupa DNS serveru kroz VPN tunnel.

en: Source IPs
bs: Izvorni IPovi

en: Source OS
bs: Izvorni OS

en: Source Port
bs: Izvorni port

en: Source Port Range
bs: Domet izvornog porta

en: Source Ports
bs: Izvorni portovi

en: Source Tracking
bs: Praćenje izvora

en: Source address
bs: Izvorna adresa

en: Source addresses
bs: Izvorne adrese

en: Source bit count
bs: Broj izvornih bitova

en: Source hash
bs: Izvorni heš

en: Source must be IPv4.
bs: Izvor mora biti IPv4.

en: Source network for the outbound NAT mapping.
bs: Izvorna mreža za vanopsežno NAT mapiranje.

en: Source not
bs: Ne izvor

en: Source port range
bs: Izvorni domet portova

en: Source prefix
bs: Izvorni prefiks

en: Source quench
bs: Ugasiti izvor

en: Source tracking timeout
bs: Timeout izvora praćenja

en: Spaces or slashes cannot be used in the 'name' field.
bs: Razmaci ili kose crte ne smiju biti korištenu u polju 'ime'.

en: Span Port
bs: Širi port

en: Span interface (%s) cannot be part of the bridge. Remove the span interface from bridge members to continue.
bs: Span interface (%s) ne može biti dio bridgea. Uklonite span interface iz bridge članova za nastavak.

en: Spanish
bs: Španski

en: Spanish (Argentina)
bs: Španski (Argentina)

en: Specific date
bs: Specifični datum

en: Specific date (mm/dd/yyyy)
bs: Specifičan datum (mm/dd/yyyy)

en: Specifies the method used to configure a virtual adapter IP address.
bs: Specificira metodu korištenu za konfigurisanje adaptera virtualne IP adrese.

en: Specifies the method used to supply a virtual adapter IP address to clients when using TUN mode on IPv4.%1$sSome clients may require this be set to "subnet" even for IPv6, such as OpenVPN Connect (iOS/Android). Older versions of OpenVPN (before 2.0.9) or clients such as Yealink phones may require "net30".
bs: Specificira metodu korištenu za davanje virtualne IP adrese adaptera klijentima pri korištenju TUN načina na IPv4. %1$sNeki klijenti zahtijevaju da ovo bude "subnet" čak i za IPv6 kao što su OpenVPN Connect (iOS/Android). Starije verzije OpenVPN-a (prije 2.0.9) ili klijenti poput Yealink telefona mogu zahtijevati "net30".

en: Specifies the protocol to use for authentication.
bs: Specificira protokol koji će se koristiti za autentikaciju.

en: Specify a NAS identifier to override the default value (pfSense.localdomain)
bs: Specificiraj NAS identifikator za overrideanje zadane vrijednost (pfSense.localdomain)

en: Specify domain as DNS Default Domain
bs: Specificirajte domenu kao zadanu DNS domenu

en: Specify optional secret shared between peers. Required on some devices/setups.
bs: Specificiraj opcionalnu tajnu dijeljenu između peerova. Potrebno na nekim uređajima/postavkama.

en: Specify the %s port or port range for this rule. The "To" field may be left empty if only filtering a single port.
bs: Specificiraj %s port ili domet porta za ovo pravilo. Polje "ka" može ostati prazno ako se filtrira jedan port.

en: Specify the maximum number of clients allowed to concurrently connect to this server.
bs: Specificirajte maksimalan broj klijenata dozvoljenih da se istovremeno spoje na ovaj server.

en: Specify the port on the machine with the IP address entered above. In case of a port range, specify the beginning port of the range (the end port will be calculated automatically).%sThis is usually identical to the "From port" above.
bs: Specificiraj port na uređaju sa IP adresom unesenom iznad. U slučaju dometa portova, specificirajte početni port dometa (krajnji će biti automatski nađen). %s Ovo je često identično "Ka portu" iznad.

en: Specify the port or port range for the destination of the packet for this mapping. The 'to' field may be left empty if only mapping a single port.
bs: Specificiraj port ili domet portova za destinaciju paketa za ovo mapiranje. 'Ka' polje može ostati prazno ako mapiramo samo jedan port.

en: Specify the source port or port range for this rule. This is usually random and almost never equal to the destination port range (and should usually be 'any'). The 'to' field may be left empty if only filtering a single port.
bs: Specificiraj izvorni port ili domet portova za ovo pravilo. Ovo je obično nasumično i gotovo nikad nije jednako destinacijskom dometu portova (i trebalo bi biti 'any'). Polje 'ka' može ostati prazno ako filtriramo samo jedan port.

en: Specify the starting address for the client IP address subnet.
bs: Specificirajte početnu adresu subneta klijentske IP adrese.

en: Speed and Duplex
bs: Brzina i duplex

en: Split DNS
bs: Razdijeli DNS

en: Split connections
bs: Razdvoji konekcije

en: Standard ports are 1812 (authentication) and 1813 (accounting).
bs: Standardni portovi su 1812 (autentikacija) i 1813 (računanje).

en: Start %sService
bs: Pokreni %sServis

en: Start Configuration upgrade at %s, set execution timeout to 15 minutes
bs: Početak konfiguracijskog ažuriranja u %s, postavljeno vrijeme isteka izvršavanja na 15 minuta

en: Start DHCP6 client in debug mode
bs: Pokreni DHCP6 u načinu za debagiranje

en: Start Hrs
bs: Početni sati

en: Start Mins
bs: Početne minute

en: Start time
bs: Početno vrijeme

en: Started IGMP proxy service.
bs: Startan IGMP proxy servis.

en: Starting 3gstats.php on device '%1$s' for interface '%2$s'
bs: Startam 3gstats.php na uređaju '%1$s' za interface '%2$s'

en: Starting DHCP relay service...
bs: Startam DHCP relej servis...

en: Starting DHCP service...
bs: Pokrećem DHCP servis

en: Starting DHCPv6 relay service...
bs: Startam DHCPv6 relej servis...

en: Starting DNS Resolver...
bs: Startam DNS resolver...

en: Starting DNS forwarder...
bs: Startam DNS forwarder....

en: Starting DynDNS clients...
bs: Startam DynDNS klijente...

en: Starting SNMP daemon...
bs: Startam SNMP daemon...

en: Starting UPnP service...
bs: Startam UPnP servis...

en: Starting dhcp6 client for interface wan %s in DHCP6 without RA mode
bs: Pokrećem dhcp6 klijent za interface wan %s u DHCP6 bez RA načinu rada.

en: Starting syslog...
bs: Pokrećem syslog...

en: Starting webConfigurator...
bs: Pokrećem webConfigurator...

en: Startup/Shutdown Sound
bs: Zvuk pokretanja/gašenja

en: State
bs: Stanje

en: State Filter
bs: Filter stanja

en: State Killing on Gateway Failure
bs: Uništavanje stanja na neuspjehu gatewaya

en: State Synchronization Settings (pfsync)
bs: Postavke sinhronizacije stanja (pfsync)

en: State Table
bs: tablica stanja

en: State Table Size
bs: Veličina statusne tablice

en: State Timeout in seconds (TCP only)
bs: Timeout stanja u sekundama (samo TCP)

en: State Timeouts (seconds - blank for default)
bs: Timeoutovi stanja (sekunde - prazno za zadanu vrijednost)

en: State display suppressed without filter submission. See System > General Setup, Require State Filter.
bs: Prikaz stanja smanjen bez slanja filtera. Pogledaj Sistem > Generalne postavke, Potreban filter stanja.

en: State reset options
bs: Opcije resetovanja stanja

en: State table size
bs: Veličina statusne tablice

en: State timeout
bs: Timeout stanja

en: State timeout (advanced option) must be a positive integer
bs: Timeout stanja (napredna opcija)  mora biti pozitivan cijeli broj

en: State type
bs: Tip stanja

en: Stateless DHCP
bs: DHCP bez stanja

en: Stateless DHCP - RA Flags [other stateful], Prefix Flags [onlink, auto, router]
bs: DHCP bez stanja - RA oznake [other stateful], Prefiksne oznake [onlink, auto, router]

en: States
bs: stanja

en: States Summary
bs: Pregled state tabele

en: States details
bs: Detalji stanja

en: Static
bs: Statično

en: Static ARP
bs: Statični ARP

en: Static ARP is enabled.  An IP address must be specified.
bs: Statički ARP je uključen. IP adresa mora biti specificirana.

en: Static DHCP
bs: Statički DHCP

en: Static DHCPv6 Mapping
bs: Statično DHCPv6 mapiranje

en: Static IPv4
bs: Statički IPv4

en: Static IPv4 Configuration
bs: Statična IPv4 konfiguracija

en: Static IPv6
bs: Statički IPv6

en: Static IPv6 Configuration
bs: Statična IPv6 konfiguracija

en: Static Port
bs: Statični port

en: Static Route configuration
bs: Konfiguracija statičke rute

en: Static Routes
bs: Statične Rute

en: Static Routes: Gateway IP could not be found for %s
bs: Statične Rute: Gateway IP ne može biti pronađen za %s

en: Static route filtering
bs: Filtriranje statične rute

en: Static routes
bs: Statične Rute

en: Statistics
bs: Statistika

en: Statistics Logging
bs: Statistika logiranja

en: Statistics graphs
bs: Graf statistike

en: Statistics unavailable because ntpq and ntpdc queries are disabled in the %1$sNTP service settings%2$s
bs: Statistika nedostupna jer ntpq i ntpdc upiti su isključeni u %1$sNTP servisne postavke%2$s

en: Stats Item
bs: Statistika predmeta

en: Status Queues
bs: Statusni redovi

en: Step %s of %s
bs: Korak %s od %s

en: Sticky Address: The Sticky Address option can be used with the Random and Round Robin pool types to ensure that a particular source address is always mapped to the same translation address.
bs: Sticky adresa: Opcija sticky adrese se može koristiti sa nasumičnim i Round Robin pool tipovima da se osigura da određena izvorna adresa se uvijek mapira na istu translacijsku adresu.

en: Sticky Ports
bs: Sticky portovi

en: Sticky interface (%s) is not part of the bridge. Remove the sticky interface to continue.
bs: Sticky interface (%s) nije dio bridgea. Uklonite sticky interface za nastavak.

en: Stop %sService
bs: Zaustavi %sServis

en: Stop Hrs
bs: Sati zaustavljanja

en: Stop Mins
bs: Minute zaustavljanja

en: Stop time
bs: Vrijeme zaustavljanja

en: Stopped
bs: Stopirano

en: Stopping all packages.
bs: Zaustavljanje svih paketa.

en: Strict CRL Checking
bs: Striktno CRL provjeravanje

en: Strict Key Regeneration
bs: Striktna regeneracija ključa

en: Strict User-CN Matching
bs: Striktno poklapanje korisnika CN

en: Strict binding
bs: Striktna dodjela

en: Strict interface binding
bs: Striktna dodjela interfejsa.

en: String type must be enclosed in quotes like "this" or must be a series of octets specified in hexadecimal, separated by colons, like 01:23:45:67:89:ab:cd:ef
bs: Tip stringa mora biti zatvoren u navodnicima poput "this" ili mora biti niz octeta specificiranih u heksadecimalnom brojnom sistemu, razdvojenih zarezima, poput 01:23:45:67:89:ab:cd:ef

en: Submission on captiveportal page with unknown zone parameter: %s
bs: Slanje na stranicu zabranjenog portala sa nepoznatim zonskim parametrom: %s

en: Submit this to the developers for inspection
bs: Pošalji developerima na uvid

en: Subnet -- One IP address per client in a common subnet
bs: Subnet -- jedna IP adresa po klijentu u standardnom subnetu

en: Subnet Mask
bs: Subnet maska

en: Subnet bit count
bs: Subnet brojač bitova

en: Subnet is too large to expand into individual host IP addresses (%s)
bs: Subnet je prevelik za ekspanziju na pojedinačne host IP adrese (%s)

en: Subnet mask
bs: Subnet maska

en: Subnet mask IPv4
bs: Subnet maska IPv4

en: Subnet mask IPv6
bs: Subnet maska IPv6

en: Subnet mask must be an integer between 0 and 32
bs: Subnet maska mora biti cijeli broj između 0 i 32.

en: Subnets
bs: Subneti

en: Subnets are specified in CIDR format.  Select the CIDR mask that pertains to each entry.	/128 specifies a single IPv6 host; /64 specifies a normal IPv6 network; etc.  If no subnets are specified here, the Router Advertisement (RA) Daemon will advertise to the subnet to which the router's interface is assigned.
bs: Subneti specificirani u CIDR formatu. Odaberite CIDR masku koja će ostati za svaki unos. /128 specificira jedinstven IPv6 host; /64 specificira standardnu IPv6 mrežu; itd. Ako nijedan subnet nije specificiran ovdje, Router Reklamiranje (RA) Daemon će reklamirati subnet ka mreži kojoj je interface dodijeljen.

en: Success
bs: Uspjeh

en: Successful login for user '%1$s' from: %2$s
bs: Uspješno prijavljivanje za korisnika '%1$s' sa: %2$s

en: Successfully added pass rule!
bs: Uspješno dodano pass pravilo!

en: Successfully installed package: %s.
bs: Uspješno instaliran paket: %s

en: Successfully reverted to timestamp %1$s with description "%2$s".
bs: Uspješno vraćeno na vrijeme %1$s sa opisom "%2$s".

en: Successive connections will be redirected to the servers in a round-robin manner with connections from the same source being sent to the same web server. This "sticky connection" will exist as long as there are states that refer to this connection. Once the states expire, so will the sticky connection. Further connections from that host will be redirected to the next web server in the round robin. Changing this option will restart the Load Balancing service.
bs: Uzastopne konekcije će biti preusmjerene ka serverima u round-robin maniru sa konekcijama s istog izvora da se šalju istom web serveru. "Sticky konekcija" će postojati onoliko koliko postoji stanja koji referišu na ovu konekciju. Onda kad stanja isteknu, tad će isteći i sticky konekcija. Daljnje konekcije će biti preusmjerene na sljedeći web server u round robinu. Mijenjanje ove opcije će restarovati servis balansiranja opterećenja.

en: Summary View
bs: Pregled sveukupnog

en: Sun
bs: Ned

en: Support for IPsec Mobile Clients is enabled but a Phase 1 definition was not found
bs: Podrška za IPsec mobilne klijente je uključena ali Phase 1 definicija nije pronađena.

en: Supports Cisco EtherChannel.  This is a static setup and does not negotiate aggregation with the peer or exchange frames to monitor the link.
bs: Podržava Cisco EtherKanal. Ovo je statički setup i ne traži agregaciju peera ili razmjenu frameova za praćenje linka.

en: Supports the IEEE 802.3ad Link Aggregation Control Protocol (LACP) and the Marker Protocol.	LACP will negotiate a set of aggregable links with the peer in to one or more Link Aggregated Groups.  Each LAG is composed of ports of the same speed, set to full-duplex operation.  The traffic will be balanced across the ports in the LAG with the greatest total speed, in most cases there will only be one LAG which contains all ports.	In the event of changes in physical connectivity, Link Aggregation will quickly converge to a new configuration.
bs: Podržava IEEE 802.3ad Ling Aggregation Control Protocol (LACP) i marker protokol. LACP će tražiti skup prihvatljivih linkova u peeru za jednu ili više link agregiranih grupa. Svaki LAG se sastoji od portova iste brzine, postavljeni na full-duplex operaciju. Promet će biti balansiran kroz sve portove u LAGu sa najvećom mogućom brzinom, u većini slučajeva će biti samo LAG koji sadrži sve portove. U eventu promjena fizičke konektivnosti, agregacija linkova će težiti ka novoj konfiguraciji.

en: Suppress ARP messages
bs: Zataškaj ARP poruke

en: Suspends
bs: Suspendovanja

en: Swap Usage
bs: Swap korištenje

en: Switch to bits/s
bs: Prebaci na bitove

en: Switch to bytes/s
bs: Prebaci na bajtove

en: Switches
bs: Switchevi

en: Sync Source
bs: Sinhroniziraj izvor

en: Sync options
bs: Opcije sinhronizacije

en: Sync password
bs: Sinhroniziraj lozinku

en: Sync port
bs: Sinhroniziraj port

en: Sync username
bs: Sinhroniziraj korisničko ime

en: Synchronize Auth Servers
bs: Sinhroniziraj autentikacijske servere

en: Synchronize Captive Portal)
bs: Sinhroniziraj sigurnosni portal

en: Synchronize Certificates
bs: Sinhroniziraj certifikate

en: Synchronize Config to IP
bs: Sinhroniziraj konfiguraciju sa IPom.

en: Synchronize DHCPD
bs: Sinhroniziraj DHCPD

en: Synchronize DNS (Forwarder/Resolver)
bs: Sinhroniziraj DNS (Prosljeđivač/Razrješivač)

en: Synchronize Firewall aliases
bs: Sinhroniziraj firewall aliase

en: Synchronize Firewall schedules
bs: Sinhroniziraj firewall rasporede

en: Synchronize IPsec
bs: Sinhroniziraj IPsec

en: Synchronize Interface
bs: Sinhroniziraj Interfejs

en: Synchronize Load Balancer
bs: Sinhroniziraj balanser prometa

en: Synchronize NAT
bs: Sinhroniziraj NAT

en: Synchronize OpenVPN
bs: Sinhroniziraj OpenVPN

en: Synchronize Rules
bs: Sinhroniziraj pravila

en: Synchronize Static Routes
bs: Sinhroniziraj Statične Rute

en: Synchronize Users and Groups
bs: Sinhroniziraj korisnike i grupe

en: Synchronize Virtual IPs
bs: Sinhroniziraj Virtualne IPove

en: Synchronize Voucher Database IP
bs: Sinhroniziraj Vaučer bazu podataka IPova

en: Synchronize Wake-on-LAN
bs: Sinhroniziraj Wake-on-LAN

en: Synchronize states
bs: Sinhroniziraj stanja

en: Synchronize traffic shaper (limiter)
bs: Sinhroniziraj upravljanje prometa (limiter)

en: Synchronize traffic shaper (queues)
bs: Sinhroniziraj upravljanje prometom (redovi)

en: Syncing packages...
bs: Sinhroniziranje paketa.

en: Syncing vouchers
bs: Sinhronizovanje vaučera

en: Syslog entries...
bs: Syslog unosi...

en: Syslog sends UDP datagrams to port 514 on the specified remote syslog server, unless another port is specified. Be sure to set syslogd on the remote server to accept syslog messages from pfSense.
bs: Syslog šalje UDP datagrame ka portu 514 na specificiranom udaljenom syslog serveru, osim ako drugačiji port nije specificiran. Osigurajte se da postavite syslogd na udaljenom serveru da prihvatite syslog poruke sa pfSensea.

en: System
bs: Sistem

en: System &gt; Cert. Manager
bs: Sistem &gt; Upravitelj certifikatima

en: System - HA node sync
bs: Sistem - HA node sinhroniziranje

en: System Activity
bs: Sistemska aktivnost

en: System Administrators
bs: Sistemski administratori

en: System Contact
bs: Sistemski kontakt

en: System Events
bs: Sistemski eventi

en: System Halt Confirmation
bs: Povrda zaustavljanja sistema

en: System Information
bs: Sistemske informacije

en: System Location
bs: Sistemska lokacija

en: System Logger Daemon
bs: Sistemski Daemon Logger

en: System Logs
bs: Sistemski logovi

en: System Reboot Confirmation
bs: Potvrda ponovnog pokretanja sistema

en: System Socket Information
bs: Sistemske socket informacije

en: System Tunables
bs: Sistemsko usklađivanje

en: System Update
bs: Sistemsko ažuriranje

en: System tunables
bs: Sistemski prilagodljivi

en: System update failed!
bs: Sistemsko ažuriranje nije uspjelo!

en: System update successfully completed.
bs: Sistemsko ažuriranje uspješno završeno.

en: System will be configured as a DHCP server on the default LAN interface
bs: Sistem će biti konfigurisan kao DHCP server na zadanom LAN interfaceu

en: TBR Size
bs: TBR veličina

en: TCP Flags
bs: TCP oznake

en: TFTP servers
bs: TFTP serveri

en: TLS Authentication
bs: TLS autentikacija

en: TLS Configuration
bs: TLS konfiguracija

en: TLS Encryption and Authentication
bs: TLS enkripcija i autentikacija

en: TLS handler
bs: TLS vodič

en: TTL for Host Cache Entries
bs: TTL za host keš unose

en: Table
bs: Tablica

en: Table last updated on %s.
bs: Tablica zadnji put ažurirana %s

en: Table to Display
bs: Tablica za prikaz

en: Tables
bs: Tablice

en: Tagged
bs: Označen

en: Tags can contain only numbers or a range  (in format #-#) from %1$s to %2$s.
bs: Tagovi mogu sadržavati samo brojeve ili opseg (u formatu #-#) od %1$s do %2$s.

en: Target Network
bs: Ciljana mreža

en: Tbrsize must be an integer.
bs: Tbrsize mora biti cijeli broj.

en: Tbrsize must be positive.
bs: Tbrsize mora biti pozitivan.

en: Temperature
bs: Temperatura

en: Temporarily Disable CARP
bs: Privremeno isključi CARP

en: Test Growl Settings
bs: Testiraj Growl Postavke

en: Test Port
bs: Testni port

en: Test Results
bs: Rezultati testa

en: Test SMTP Settings
bs: Testiraj SMTP postavke

en: Test Vouchers
bs: Testni vaučeri

en: Test results
bs: Rezultati testa

en: Test type
bs: Tip testa

en: Text
bs: Tekst

en: Text type cannot include quotation marks.
bs: Text tip ne smije sadržavati navodnike.

en: That username is reserved by the system.
bs: To korisničko ime je rezervisano sistemom.

en: The "pass" selection does not work properly with Multi-WAN. It will only work on an interface containing the default gateway.
bs: "pass" selekcija ne radi dobro sa Multi-WANom. Samo će raditi na interfejsima koji sadrže zadani gateway.

en: The %1$s name must be less than 32 characters long, may not consist of only numbers, may not consist of only underscores, and may only contain the following characters: %2$s
bs: Ime %1$s mora sadržavati manje od 32 karaktera, ne smije se sastojati od samo brojeva, donjih crta i smije samo sadržavati sljedeće znakove: %2$s

en: The %1$s name must not be a well-known IP protocol name such as TCP, UDP, ICMP etc.
bs: %1$s ime mora biti dobro poznat IP protokol ime kao TCP, UDP, ICMP itd.

en: The %1$s name must not be a well-known TCP or UDP port name such as ssh, smtp, pop3, tftp, http, openvpn etc.
bs: Ime %1$s ne smije biti dobro poznato ime TCP ili UDP porta kao ssh, smtp, pop3, tftp, http, openvpn itd.

en: The %1$s name must not be either of the reserved words %2$s or %3$s.
bs: %1$s ime ne smije biti niti jedno od rezervisanih rijeci %2$s ili %3$s

en: The %1$s package is not installed.%2$sDeletion aborted.
bs: %1$s paket nije instaliran. %2$s Brisanje zaustavljeno.

en: The %1$s package is not installed.%2$sInstallation aborted.
bs: %1$s paket nije instaliran. %2$s Instalacija prekinuta.

en: The %1$sSource Port Range%2$s for a connection is typically random and almost never equal to the destination port. In most cases this setting must remain at its default value, %1$sany%2$s.
bs: %1$s Izvorni Domet porta%2$s za konekciju je tipično nasumičan i skoro nikad nije jednak destinacijskom portu. U većini slučajeva ova postavka mora ostati na zadanoj vrijednosti, %1$sbilo koji%2$s.

en: The %s configuration has been changed.
bs: %s konfiguracija je promijenjena.

en: The %s file contents have been updated.
bs: Sadržaj fajla %s je ažuriran

en: The %s package is missing its configuration file and must be reinstalled.
bs: %s paketu fale konfiguracijski fajlovi i mora biti reinstaliran.

en: The 'name' field must be 16 characters or less.
bs: Polje 'ime' mora imati 16 karaktera ili manje.

en: The 'name' field must be 32 characters or less.
bs: Polje 'Ime' mora biti 32 karaktera ili manje.

en: The (%s) group name contains invalid characters.
bs: Ime grupe (%s) sadrži nevaljane znakove.

en: The 1:1 mapping will only be used for connections to or from the specified destination. Hint: this is usually "Any".
bs: 1:1 mapiranje će biti korišteno samo za konekcije sa ili od specificirane destinacije. Savjet: ovo je često "Any".

en: The ARP cache entry for %s has been deleted.
bs: ARP unos keša za %s je obrisan.

en: The Aliases Hostname Resolve Interval value must be an integer.
bs: Interval vrijednosti razrješavanja Aliasevih hostnameova mora biti cijeli broj.

en: The Captive Portal MAC address configuration has been changed.
bs: Konfiguracija zabranjenog portala MAC adrese je promijenjena.

en: The Captive Portal entry list has been changed.
bs: Lista unosa zabranjenog portala je promijenjena.

en: The Captive Portal voucher database has been synchronized with %s (pfsense.exec_php).
bs: Vaučer baza podataka zabranjenog portala je sinhronizirana sa %s (pfsense.exec_php).

en: The Captive Portal zone (%1$s) has Hard Timeout parameter set to a value bigger than Default lease time (%2$s).
bs: Zona zabranjenog portala (%1$s) ima Hard Timeout parametar postavljen na veću vrijednost od zadanog vremena posudbe (%2$s).

en: The Check IP Service URL is not valid.
bs: Check IP URL servisa nije validan.

en: The Check IP Service name contains invalid characters.
bs: Check IP servis sadrži pogrešne karaktere.

en: The DHCP Server is active on this interface and it can be used only with IPv4 subnet < 31. Please disable the DHCP Server service on this interface first, then change the interface configuration.
bs: DHCP server je još uvijek aktivan na ovom interfaceu i može se koristiti samo sa IPv4 subnetom < 31. Molimo isključite DHCP server na ovom interfaceu, a zatim promijenite konfiguraciju interfacea.

en: The DHCP Server is active on this interface and it can be used only with a static IP configuration. Please disable the DHCP Server service on this interface first, then change the interface configuration.
bs: DHCP server je aktivan na ovom interfaceu i može se koristiti samo sa statičnom IP konfiguracijom. Molimo isključite DHCP server na ovom interfaceu prvo, a zatim promijenite konfiguraciju interfacea.

en: The DHCP Server requires a static IPv4 subnet large enough to serve addresses to clients.
bs: DHCP server zahtijeva statički IPv4 subnet dovoljno velik da služi adrese klijentima.

en: The DHCP lease table can be viewed on the %1$sStatus: DHCPv6 leases%2$s page.
bs: DHCP tablica posudbi se može vidjeti na stranici %1$sStatus: DHCPv6 posudbe%2$s.

en: The DHCP range cannot overlap any static DHCP mappings.
bs: DHCP domet se ne smije preklapati sa bilo kojim statičkim DHCP mappingom.

en: The DHCP relay on the %s interface must be disabled before enabling the DHCP server.
bs: DHCP relej na %s interfaceu mora biti isključen prije uključivanja DHCP servera.

en: The DHCP server can optionally provide a domain search list. Use the semicolon character as separator.
bs: DHCP server može opcionalno dati listu za pretragu domena. Koristite tačku zarez kao karakter separator.

en: The DHCP6 Server is active on this interface and it can be used only with a static IPv6 configuration. Please disable the DHCPv6 Server service on this interface first, then change the interface configuration.
bs: DHCP6 server je aktivan na ovom interfaceu i može se koristiti samo sa statičkom IPv6 konfiguracijom. Molimo isključite DHCPv6 server na ovom interfaceu, a zatim promijenite konfiguraciju interfacea.

en: The DHCPv6 Server can only be enabled on interfaces configured with a static IPv6 address. This system has none.
bs: DHCPv6 server može biti uključen samo na interfejsima konfigurisanim sa statičnom IPv6 adresom. Ovaj sistem nema niti jednu.

en: The DHCPv6 Server can only be enabled on interfaces configured with static, non unique local IP addresses.
bs: DHCPv6 Server može biti uključen samo na interfejsima koji su konfigurisani kao statički, nejedinstvene lokalne IP adrese.

en: The DNS Forwarder is enabled using this port. Choose a non-conflicting port, or disable the DNS Forwarder.
bs: DNS forwarder je uključen koristeći ovaj port. Odaberite port koji se ne poklapa ili isključite DNS forwarder.

en: The DNS Resolver is enabled using this port. Choose a non-conflicting port, or disable DNS Resolver.
bs: DNS resolver je uključen koristeći ovaj port. Odaberite port koji se ne poklapa ili isključite DNS resolver.

en: The DNS forwarder configuration has been changed.
bs: Konfiguracija DNS forwardera je promijenjena.

en: The DNS forwarder will use the DNS servers entered in %1$sSystem > General Setup%2$s or those obtained via DHCP or PPP on WAN if &quot;Allow DNS server list to be overridden by DHCP/PPP on WAN&quot; is checked. If that option is not used (or if a static IP address is used on WAN), at least one DNS server must be manually specified on the %1$sSystem > General Setup%2$s page.
bs: DNS forwarder će koristiti DNS servere unesene %1$sSistem > Generalne postavke%2$s ili one koji su dobijeni preko DHCPa ili PPPa na WANu ako &quot;Dozvoli DNS listi servera da budu overrideani zbog DHCP/PPPa na WANu&quot; je selektovano. Ako ta opcija nije korištena (ili ako je statička IP adresa korištena na WANu) bar jedan DNS server mora biti ručno specificiran na stranici %1$sSistem > Generalne postavke%2$s.

en: The DNS resolver configuration has been changed.
bs: Konfiguracija DNS resolvera je promijenjena.

en: The DNS servers entered in %1$sSystem: General Setup%3$s (or the %2$sDNS forwarder%3$s if enabled) will be assigned to clients by the DHCP server.
bs: DNS serveri uneseni u %1$sSistem: Generalni setup%3$s (ili %2$sDNS forwarder%3$s ako je uključen) će biti dodijeljen klijentima od strane DHCP servera.

en: The DNS update TTL must be an integer.
bs: DNS ažuriranje TTL mora biti cijeli broj.

en: The DNS update host name contains invalid characters.
bs: DNS ažuriranje host imena sadrži pogrešne karaktere

en: The DNS update key name contains invalid characters.
bs: DNS ključ ažuriranja sadrži pogrešne znakove.

en: The DNS-O-Matic username or password specified are incorrect. No updates will be distributed to services until this is resolved.
bs: DNS-O-Matic korisničko ime ili lozinka su neispravni. Nijedno ažuriranje neće biti sprovedeno za ove servise dok se ne riješi ovaj problem.

en: The Dynamic DNS Service provided is not yet supported.
bs: Dinamički DNS servis specificiran nije još podržan

en: The Elliptic Curve to use for key exchange. %1$sThe curve from the server certificate is used by default when the server uses an ECDSA certificate. Otherwise, secp384r1 is used as a fallback.
bs: Elipsna krivulja korištena za razmjenu ključeva. %1$sKriva server certifikata korištena kao zadana kada server koristi ECDSA certifikat. Inače, secp384r1 je korišteno kao alternativa.

en: The Encryption Algorithm used for data channel packets when Negotiable Cryptographic Parameter (NCP) support is not available.
bs: Enkripcijski algoritam korišten za kanalne pakete za Podesivi Kriptografski Parametar (NCP) podrška nije dostupna.

en: The Firewall Adaptive End value must be an integer.
bs: Krajnja vrijednost firewall pravila prilagođavanja mora biti cijeli broj.

en: The Firewall Adaptive Start value must be an integer.
bs: Početna vrijednost firewall pravila prilagođavanja mora biti cijeli broj.

en: The Firewall Adaptive values must be set together.
bs: Firewall pravila koja se mogu prilagođavati, te njihove vrijednosti moraju biti postavljene zajedno.

en: The Firewall Maximum Fragment Entries value must be an integer.
bs: Vrijednost maksimalnog fragmentiranog unosa u firewall mora biti cijeli broj.

en: The Firewall Maximum States value must be an integer.
bs: Vrijednost maksimalnih stanja firewalla mora biti cijeli broj.

en: The Firewall Maximum Table Entries value must be an integer.
bs: Vrijednost maksimalnog unosa u firewall tablicu mora biti cijelib roj.

en: The GRE Tunnel remote address must be IPv4 where tunnel local address is IPv4.
bs: GRE Tunnel udaljena adresa mora biti IPv4 gdje je tunnel lokalna adresa tipa IPv4.

en: The GRE Tunnel remote address must be IPv6 where tunnel local address is IPv6.
bs: GRE tunnel udaljena adresa mora biti IPv6 gdje je tunnel lokalna adresa tipa IPv6.

en: The GRE tunnel subnet must be an integer between 1 and 128.
bs: GRE tunnel subnet mora biti cijeli broj između 1 i 128.

en: The GRE tunnel subnet must be an integer between 1 and 32.
bs: Ovaj GRE tunnel subnet mora biti cijeli broj između 1 i 32.

en: The GRE tunnel subnet must be an integer.
bs: Ovaj GRE tunnel subnet mora biti cijeli broj.

en: The HTTPS server name must be specified for HTTPS login.
bs: HTTPS ime servera mora biti specificiran za HTTPS login.

en: The Help page is the only page this user has privilege for.
bs: Pomoć stranica je jedina stranica za koju ovaj korisnik ima privilegije.

en: The ICMP error timeout value must be an integer.
bs: Vrijednost ICMP error timeouta mora biti cijeli broj.

en: The ICMP first timeout value must be an integer.
bs: Vrijednost prvog ICMP timeouta mora biti cijeli broj.

en: The IGMP entry list has been changed.
bs: IGMP lista unosa je promijenjena.

en: The IP address being used to access this router is not configured locally, which may be forwarded by NAT or other means.
    								If this forwarding is unexpected, it should be verified that a man-in-the-middle attack is not taking place.
bs: IP adresa korištena za pristup ovom ruteru nije konfigurisana lokalno i može biti proslijeđena preko NAT ili nekog drugog načina.
    								Ako je ovo proslijeđivanje neočekivano, trebalo bi provjeriti da trenutno nije čovjek-u-sredini napad u toku.

en: The IP address cannot be the %s broadcast address.
bs: IP adresa ne može biti %s adresa prenosa.

en: The IP address cannot be the %s network address.
bs: IP adresa ne može biti %s mrežna adresa.

en: The IP address entered is not valid.
bs: IP adresa koja je unesena nije validna.

en: The IP address must lie in the %s subnet.
bs: IP adresa mora da leži u %s subnetu.

en: The IP address must not be within the DHCP range for this interface.
bs: IP adresa ne smije biti u DHCP domenu za ovaj interface.

en: The IP address must not be within the range configured on a DHCP pool for this interface.
bs: IP adresa ne smije biti u dometu konfigurisanom na DHCP poolu za ovaj interface.

en: The IP address or hostname of the OpenVPN server.
bs: IP adresa ili hostname OpenVPN servera.

en: The IP protocol is not recognized.
bs: IP protokol nije prepoznat.

en: The IPsec status can be checked at %1$s%2$s%3$s.
bs: IPsec status može biti provjeren na %1$s%2$s%3$s

en: The IPsec tunnel configuration has been changed.
bs: IPsec tunel konfiguracija je promijenjena.

en: The IPv4 gateway "%1$s" can not be specified for IPv6 DNS server "%2$s".
bs: IPv4 gateway "%1$s" ne može biti specificiran za IPv6 DNS server "%2$s".

en: The IPv4 gateway address '%s' can not be used as a IPv6 gateway.
bs: IPv4 gateway adresa '%s' ne može biti korištena kao IPv6 gateway.

en: The IPv4 monitor address '%s' can not be used on a IPv6 gateway.
bs: IPv4 monitor adresa '%s' ne može biti korištena na IPv6 gatewayu.

en: The IPv6 gateway "%1$s" can not be specified for IPv4 DNS server "%2$s".
bs: IPv6 gateway "%1$s" ne može biti specificiran za IPv4 DNS server "%2$s".

en: The IPv6 gateway address '%s' can not be used as a IPv4 gateway.
bs: IPv6 gateway adresa '%s' ne može biti korištena kao IPv4 gateway.

en: The IPv6 monitor address '%s' can not be used on a IPv4 gateway.
bs: IPv6 monitor adresa '%s' ne može biti korištena na IPv4 gatewayu.

en: The L2TP user list has been modified.
bs: L2TP lista korisnika je modifikovana.

en: The MAC address %s belongs to a local interface. It cannot be used here.
bs: MAC adresa %s pripada lokalnom interfaceu. Ne može biti korištena ovdje.

en: The MRU for %s must be greater than 576 bytes.
bs: MRU za %s mora biti veći od 576 bajta.

en: The MSS must be an integer between 576 and 65535 bytes.
bs: MSS mora biti cijeli broj između 576 i 65535 bajta.

en: The MTU (%1$d) is too big for %2$s (maximum allowed with current settings: %3$d).
bs: MTU (%1$d) je prevelik za %2$s (maksimalno dozvoljeno sa trenutnim postavkama: %3$d).

en: The MTU for %s must be greater than 576 bytes.
bs: MTU za %s mora biti veći od 576 bajta.

en: The MTU must be between %d and %d bytes.
bs: MTU mora biti između %d i %d bita.

en: The MTU of a VLAN cannot be greater than that of its parent interface.
bs: MTU VLANa ne može biti veći od parent interfacea.

en: The MX contains invalid characters.
bs: MX sadrži pogrešne karaktere.

en: The Maximum Time to Live for RRsets and messages in the cache. The default is 86400 seconds (1 day). When the internal TTL expires the cache item is expired. This can be configured to force the resolver to query for data more often and not trust (very large) TTL values.
bs: Maksimalno vrijme za RRsetove i Poruke u kešu. Zadano je 86400 sekundi (jedan dan). Kada interni TTL istekne, keš item je također istekao. Ovo može biti konfigurisano da forsira resolver da traži upite podataka sve češće i ne vjeruje velikim TTL vrijednostima.

en: The Minimum Time to Live for RRsets and messages in the cache. The default is 0 seconds. If the minimum value kicks in, the data is cached for longer than the domain owner intended, and thus less queries are made to look up the data. The 0 value ensures the data in the cache is as the domain owner intended. High values can lead to trouble as the data in the cache might not match up with the actual data anymore.
bs: Minimalno vrijme za RRsetove i Poruke u kešu. Zadano je 0 sekundi. Ako minimalna vrijednost bude nađena, podaci su keširani duže nego što je vlasnik domene htio, tako da se stvara manje upita za gledanje u podatke. Vrijednost 0 je sigurna vrijednost za podatke u kešu jer je to što je vlasnik domene predvidio. Visoke vrijednosti mogu uzrokovati problem jer podaci u kešu se možda ne budu poklapali sa stvarnim podacima.

en: The NAS-Identifier must be 3-253 characters long and should only contain ASCII characters.
bs: NAS-Identifikator mora biti između 3 i 253 znaka dug i smije sadržavati samo ASCII znakove.

en: The NAT configuration has been changed.
bs: NAT konfiguracija je promijenjena.

en: The NDP entry for %s has been deleted.
bs: NDP unos za %s je obrisan.

en: The NIC in the computer that is to be woken up must support Wake-on-LAN and must be properly configured (WOL cable, BIOS settings).
bs: NIC u kompjuteru za "buđenje" mora podržavati Wake-on-LAN i mora biti konfigurisan kako treba (WOL kabl, BIOS postavke).

en: The Other first timeout value must be an integer.
bs: Druga vrijednost prvog timeouta mora biti cijeli broj.

en: The Other multiple timeout value must be an integer.
bs: Druga vrijednost višestrukog timeouta mora biti cijeli broj.

en: The Other single timeout value must be an integer.
bs: Druga vrijednost jednog timeouta mora biti cijeli broj.

en: The P1 lifetime must be an integer.
bs: Životni vijek P1 mora biti cijeli broj.

en: The P2 lifetime must be an integer.
bs: P2 životni vijek mora biti cijeli broj.

en: The PPPoE entry list has been changed.
bs: Ova lista PPPoE unosa je promijenjena.

en: The Packet length is the number of bytes of each packet that will be captured. Default value is 0, which will capture the entire frame regardless of its size.
bs: Paketna dužina je broj bajta koju će svaki paket snimiti. Zadana vrijednost je 0, kojom će snimiti cijeli frame neovisno o njegovoj veličini.

en: The RA server can optionally provide a domain search list. Use the semicolon character as separator.
bs: Ra server može po želji dati listu domen pretrage. Koristite tačku zarez kao separator.

en: The Reflection timeout must be an integer.
bs: Timeout reflekcije mora biti cijeli broj.

en: The Secondary L2TP DNS Server cannot be set when the Primary L2TP DNS Server is empty.
bs: Sekundarni L2TP DNS server ne može biti postavljen kada je primarni L2TP DNS server prazan.

en: The Server Bridge DHCP range is invalid (start higher than end).
bs: Server bridge DHCP domet nije validan (početak veći od kraja).

en: The TCP FIN wait timeout value must be an integer.
bs: Vrijednost TCP FIN čekaj timeout mora biti cijeli broj.

en: The TCP closed timeout value must be an integer.
bs: Vrijednost TCP zatvorenog timeouta mora biti cijeli broj.

en: The TCP closing timeout value must be an integer.
bs: TCP vrijednost zatvaranja timeouta mora biti cijeli broj.

en: The TCP established timeout value must be an integer.
bs: Vrijednost uspostavljenog TCP timeouta mora biti cijeli broj.

en: The TCP first timeout value must be an integer.
bs: TCP prva timeout vrijednost mora biti cijeli broj.

en: The TCP idle timeout must be an integer.
bs: TCP timeout kod odsustva mora biti cijeli broj.

en: The TCP opening timeout value must be an integer.
bs: Vrijednost TCP timeouta otvaranja mora biti cijeli broj.

en: The UDP first timeout value must be an integer.
bs: Vrijednost UDP prvog timeouta mora biti cijeli broj.

en: The UDP multiple timeout value must be an integer.
bs: Vrijednost višestrukog UDP timeouta mora biti cijeli broj.

en: The UDP single timeout value must be an integer.
bs: Vrijednost jednog UDP timeouta mora biti cijeli broj.

en: The VIP configuration has been changed.
bs: VIP konfiguracija je promijenjena

en: The VLAN Priority must be an integer between 0 and 7.
bs: VLAN prioritet mora biti cijeli broj između 0 i 7.

en: The VLAN tag cannot be changed while the interface is assigned.
bs: VLAN tag ne može biti promijenjen dok je interface dodijeljen.

en: The VLAN tag must be an integer between 1 and 4094.
bs: VLAN tag mora biti cijeli broj između 1 i 4094.

en: The WPA passphrase must be between 8 and 63 characters long.
bs: WPA pass fraza mora biti između 8 i 63 znaka duga.

en: The \"Use Ramdisk\" setting has been changed. This will cause the firewall\nto reboot immediately after the new setting is saved.\n\nPlease confirm.
bs: \"Use ramdisk\"postavka je promijenjena. Ovo će uticati na to da će se firewall/nto odmah restartovati nakon što se nove postavke spase. \n\nMolimo potvrdite.

en: The address for an HTTP Proxy this client can use to connect to a remote server.%1$sTCP must be used for the client and server protocol.
bs: Adresa HTTP proxy koju ovaj klijent može koristiti za spajanje udaljenom serveru. %1$sTCP mora biti korišten za klijent i server protokol.

en: The alert interval needs to be a numeric value.
bs: Upozorenje interval mora biti numerička vrijednost.

en: The alert interval needs to be greater than or equal to the probe interval.
bs: Interval upozorenja mora biti veći ili jednak od probnog intervala.

en: The alert interval setting needs to be positive.
bs: Upozorenje interval mora biti pozitivan.

en: The algorithm used to authenticate data channel packets, and control channel packets if a TLS Key is present.%1$sWhen an AEAD Encryption Algorithm mode is used, such as AES-GCM, this digest is used for the control channel only, not the data channel.%1$sLeave this set to SHA1 unless all clients are set to match. SHA1 is the default for OpenVPN.
bs: Algoritam korišten za autentikaciju kanalnih paketa podataka i kontrolnih kanalnih paketa ako TLS ključ je prisutan. %1$sKada AEAD način enkripcijskog algoritma se koristi, poput AES-GCM, ovaj digest je korišten za kontrolu samog kanala, ne podatkovnog kanala. %1$sOstavite ovo na SHA1 osim ako svi klijenti nisu postavljeni na poklapanje. SHA1 je zadano za OpenVPN.

en: The algorithm used to authenticate data channel packets, and control channel packets if a TLS Key is present.%1$sWhen an AEAD Encryption Algorithm mode is used, such as AES-GCM, this digest is used for the control channel only, not the data channel.%1$sLeave this set to SHA1 unless the server uses a different value. SHA1 is the default for OpenVPN.
bs: Algoritam koji će se koristiti za autentikaciju kanalnih paketa podataka, i kontrolnih kanalnih paketa ako TLS ključ je prisutan. %1$sKada AEAD enkripcijski način algoritma je uključen, poput AES-GCM, ovaj digest se koristi za kontrolni kanal samo, ne samo za podatkovni kanal. %1$sOstavite ovo na SHA1 osim ako server koristi drugu vrijednost. SHA1 je zadano za OpenVPN.

en: The alias IP address family has to match the family of the remote peer address.
bs: Alias IP familija adresa mora se poklapati sa familijom udaljene peer adrese.

en: The alias list has been changed.
bs: Alias lista je promijenjena

en: The alias name cannot start with pkg_
bs: Alias ime ne može počinjati sa pkg_

en: The alias(es): %s cannot be nested because they are not of the same type.
bs: Alias(i): %s ne može biti ugniježden jer nisu istog tipa.

en: The backup cache file %s is corrupted.  Unlinking.
bs: Sigurnosna kopija keš fajla %s je oštećena. Odpovezivanje...

en: The bandwidth limit must be a positive numeric value.
bs: Limit propusnosti mora biti pozitivna numerička vrijednost.

en: The bandwidth value for %s must be an integer.
bs: Protočna vrijednost za %s mora biti cijeli broj.

en: The broadcast address cannot be used for this VIP
bs: Prenosna adresa ne može biti korištena za ovaj VIP

en: The broadcast address cannot be used in the ending subnet range.
bs: Prenos adresa ne može biti korištena u krajnjem dometu subneta.

en: The browser must support cookies to login.
bs: Web pretraživač mora podržavati kolačiće (cookies) kako bi se prijavili.

en: The capabilities offered here can be dangerous. No support is available. Use them at your own risk!
bs: Mogućnosti dostupne ovdje mogu biti opasne. Podrška nije dostupna. Koristite ih na vlastiti rizik!

en: The captive portal cannot be used on interface %1$s since it is used already on %2$s instance.
bs: Sigurnosni portal ne može biti korišten na interfaceu %1$s jer se već koristi na instanci %2$s.

en: The captive portal cannot be used on interface %s since it is part of a bridge.
bs: Sigurnosni portal ne može biti korišten na interfaceu %s jer je dio bridgea.

en: The certificate public key does not match the signing request public key.
bs: Javni ključ certifikata se ne poklapa sa zahtjevom verifikacije javnog ključa.

en: The changes have been applied successfully.
bs: Promjene su uspješno sačuvane.

en: The changes must be applied for them to take effect
bs: Promjene se moraju primijeniti da bi imale efekta

en: The changes must be applied for them to take effect.
bs: Promjene moraju biti prihvaćene kako bi imale efekta

en: The changes must be applied to take effect.
bs: Promjene se moraju prihvatiti da bi imale efekta.

en: The code appears to have generated an error, but the line responsible cannot be identified. The full response is below.
bs: Izgleda da je kod generisao grešku, ali odgovorna linija ne može biti identifikovana. Potpuni odgovor je ispod.

en: The command '%1$s' returned exit code '%2$d', the output was '%3$s'
bs: Komanda '%1$s' je vratila izlazni kod '%2$d' i izlaz je '%3$s'

en: The community string is like a password, restricting access to querying SNMP to hosts knowing the community string. Use a strong value here to protect from unauthorized information disclosure.
bs: String zajednice je kao lozinka, brani pristup upitima SNMP prema hostovima u znanju stringa zajednice. Koristite jaku vrijednost ovdje da bi se zaštili od neautorizovanog otkrivanja informacija

en: The configuration area has been restored. The firewall may need to be rebooted.
bs: Konfiguracijska zona je vraćena. Firewall će se trebati ponovno pokrenuti.

en: The configuration could not be restored (file upload error).
bs: Konfiguracija nije mogla biti vraćena (greška pri slanju fajla).

en: The configuration could not be restored.
bs: Konfiguracija nije mogla biti vraćena.

en: The contents of the HTML/PHP file that is uploaded here are displayed on authentication success when the logout popup is enabled.
bs: Sadržaj HTML/PHP fajla koji je uploadan ovdje su prikazani na uspješnosti autentikacije kada se logout popup uključi.

en: The contents of the HTML/PHP file that is uploaded here are displayed when an authentication error occurs. It may include "$PORTAL_MESSAGE$", which will be replaced by the error or reply messages from the RADIUS server, if any.
bs: Sadržaj HTML/PHP fajla koji je uploadan ovdje su prikazani kada se pojavi greška prilikom autentikacije. Može uključivati "$PORTAL_MESSAGE$", koja će biti zamijenjena greškom ili porukama odgovaranja RADIUS servera, ako postoje.

en: The default is to use the IP on this interface of the firewall as the gateway. Specify an alternate gateway here if this is not the correct gateway for the network.
bs: Zadano je da se koristi IP na ovom interfaceu od firewalla kao gateway. Specificiraj drugi gateway ovdje ako to nije tačan gateway za mrežu.

en: The default is to use the IP on this interface of the firewall as the gateway. Specify an alternate gateway here if this is not the correct gateway for the network. Type "none" for no gateway assignment.
bs: Zadano je da se koristi IP na ovom interfaceu od firewalla kao gateway. Specificiraj drugi gateway ovdje ako to nije tačan gateway za ovu mrežu. Napišite "none" da se nijedan gateway ne dodijeli.

en: The default is to use the domain name of this system as the default domain name provided by DHCP. An alternate domain name may be specified here.
bs: Zadano je da se koristi ime domene ovog sistema kao zadano ime domene od DHCPa. Drugo ime domene se može specificirati ovdje.

en: The default is to use the domain name of this system as the default domain name provided by DHCP. An alternate domain name may be specified here.
bs: Zadano je da se koristi ime domene ovog sistema kao zadano ime domene podržano od strane DHCPa. Drugo ime domene može biti specificirano ovdje.

en: The default lease time must be at least 60 seconds.
bs: Zadano vrijeme posudbe mora biti barem 60 sekundi.

en: The default optimization algorithm
bs: Zadani optimizacijski algoritam

en: The default settings are recommended for most use cases. However if changing the settings, please observe the following restrictions:
bs: Zadane postavke su preporučene za većinu slučajeva. Ako želite da ih ipak promijenite, obratite pažnju na sljedeće restrikcije:

en: The destination port range overlaps with an existing entry.
bs: Interval destinacijskog porta se preklapa sa postojećim unosom.

en: The domain may only contain the characters a-z, 0-9, '-' and '.'.
bs: Domena može sadržavati samo znakove a-z, 0-9, '-' i '.'.

en: The entry was successfully deleted
bs: Unos je uspješno obrisan

en: The external IP address (%1$s) and destination IP address (%2$s) are of different address families.
bs: Eksterna IP adresa (%1$s) i destinacijska IP adresa (%2$s) su različite familije adresa.

en: The external IP address (%1$s) and internal IP address (%2$s) are of different address families.
bs: Eksterna IP adresa (%1$s) i interna IP adresa (%2$s) su različite familije adresa.

en: The field %s contains invalid characters.
bs: Polje %s sadrži karaktere koji nisu validni.

en: The field %s is required.
bs: Polje %s je potrebno.

en: The field '%1$s' must contain a single valid %2$s CIDR range.
bs: Polje '%1$s' mora sadržavati jedan validan %2$s  CIDR raspon

en: The field '%1$s' must contain only valid %2$s CIDR range(s) separated by commas.
bs: Polje '%1$s' mora sadržavati samo validan %2$s CIDR raspon(e) razdvojene zarezom.

en: The field '%s' contains invalid characters.
bs: Polje '%s' sadrži neispravne karaktere.

en: The field '%s' is required.
bs: Polje '%s' je obavezno.

en: The field '%s' must contain a valid IP address or domain name.
bs: Polje '%s' mora sadržavati validnu IP adresu ili ime domene.

en: The field 'Concurrent connections' must be numeric.
bs: Polje 'Istovremene konekcije' mora biti numeričko

en: The field 'DNS Server #1' must contain a valid IP address
bs: Polje 'DNS Server #1' mora sadržavati validnu IP adresu

en: The field 'DNS Server #1' must contain a valid IPv4 or IPv6 address
bs: Polje 'DNS Server #1' mora sadržavati validnu IPv4 ili IPv6 adresu.

en: The field 'DNS Server #2' must contain a valid IP address
bs: Polje 'DNS Server #2' mora sadržavati validnu IP adresu

en: The field 'DNS Server #2' must contain a valid IPv4 or IPv6 address
bs: Polje 'DNS Server #2' mora sadržavati validnu IPv4 ili IPv6 adresu.

en: The field 'DNS Server #3' must contain a valid IP address
bs: Polje 'DNS Server #3' mora sadržavati validnu IP adresu

en: The field 'DNS Server #3' must contain a valid IPv4 or IPv6 address
bs: Polje 'DNS Server #3' mora sadržavati validnu IPv4 ili IPv6 adresu.

en: The field 'DNS Server #4' must contain a valid IP address
bs: Polje 'DNS Server #4' mora sadržavati validnu IP adresu

en: The field 'DNS Server #4' must contain a valid IPv4 or IPv6 address
bs: Polje 'DNS Server #4' mora sadržavati validnu IPv4 ili IPv6 adresu.

en: The field 'Descriptive Name' contains invalid characters.
bs: Polje 'Deskriptivni opis' sadrži pogrešne karaktere.

en: The field 'Distinguished name Email Address' contains invalid characters.
bs: Polje 'Skriveno ime Email adrese' sadrži pogrešne karaktere.

en: The field 'NTP Server #1' must contain a valid IP address
bs: Polje 'NTP Server #1' mora sadržavati validnu IP adresu

en: The field 'NTP Server #2' must contain a valid IP address
bs: Polje 'NTP Server #2' mora sadržavati validnu IP adresu

en: The field 'NTP Server #3' must contain a valid IP address
bs: Polje 'NTP Server #3' mora sadržavati validnu IP adresu

en: The field 'NTP Server #4' must contain a valid IP address
bs: Polje 'NTP Server #4' mora sadržavati validnu IP adresu

en: The field 'NetBIOS Data Distribution Server #1' must contain a valid IP address
bs: Polje 'NetBIOS podatkovni distribucijski server #1' mora sadržavati validnu IP adresu

en: The field 'Primary L2TP DNS Server' must contain a valid IPv4 address.
bs: Polje 'Primarni L2TP DNS server' mora sadržavati validnu IPv4 adresu.

en: The field 'Secondary L2TP DNS Server' must contain a valid IPv4 address.
bs: Polje 'Sekundarni L2TP DNS server' mora sadržavati validnu IPv4 adresu.

en: The field 'Shared Key' does not appear to be valid
bs: Polje 'Dijeljeni ključ' izgleda da nije validno

en: The field 'TLS Key Usage Mode' is not valid
bs: Polje 'Način korištenja TLS Ključa' nije validno

en: The field 'TLS Key' does not appear to be valid
bs: Polje 'TLS ključ' izgleda da nije validno

en: The field 'Topology' contains an invalid selection
bs: Polje 'Topologija' sadrži nevaljan odabir

en: The field 'WINS Server #1' must contain a valid IP address
bs: Polje 'WINS Server #1' mora sadržavati validnu IP adresu

en: The field 'WINS Server #2' must contain a valid IP address
bs: Polje 'WINS Server #2' mora sadržavati validnu IP adresu

en: The firewall configuration has been changed.
bs: Firewall konfiguracija je promijenjena.

en: The firewall is now rebooting.
bs: Firewall se restarta.

en: The firewall rule configuration has been changed.
bs: Konfiguracija pravila za firewall je promijenjena.

en: The firewall rules are now reloading in the background.
bs: Firewall pravila se ponovo učitavaju u pozadini.

en: The firewall tunables have changed.
bs: Firewall štimanja su promijenjena.

en: The firewall will reboot after restoring the configuration.
bs: Firewall će se restartovati nakon vraćanja konfiguracije.

en: The first (highest in list) enabled check ip service will be used to check IP addresses for Dynamic DNS services, and RFC 2136 entries that have the "Use public IP" option enabled.
bs: Prvi (najviši u listi) uključen IP servis će biti korišten za provjeru IP adresa za dinamičke DNS servise i RFC 2316 unose koji imaju "Koristi javnu IP" opciju uključenu.

en: The fixed option is intended for large screens only.
bs: Popravljena opcija je samo za velike ekrane.

en: The following attributes are added to certificates and requests when they are created or signed. These attributes behave differently depending on the selected mode.
bs: Slijedeći atributi su dodani na certifikate i zahtjeve kad su oni kreirani ili potpisani. Ovi atributi se ponašaju drugačije u ovisnosti o odabranom modu.

en: The following file could not be read %1$s from %2$s
bs: Sljedeći fajl nije moguće pročitati %1$s sa %2$s

en: The following input errors were detected:
bs: Sljedeće ulazne greške su detektovane:

en: The following privileges effectively give administrator-level access to users in the group because the user gains access to execute general commands, edit system files,  modify users, change passwords or similar:
bs: Sljedeće privilegije efektivno daju pristup administratorskog nivoa korisnicima u ovoj grupi jer korisnik dobija pristup za izvršenje generalnih komandi, modifikovanje sistemskih fajlova, modifikovanje korisnika, mijenjanje lozinki ili slično:

en: The following privileges effectively give the user administrator-level access  because the user gains access to execute general commands, edit system files,  modify users, change passwords or similar:
bs: Sljedeće privilegije efektivno daju korisniku administratorski nivo pristupa jer korisnik dobija pristup izvršavanju generalnih komandi, modifikovanje sistemskih fajlova, modifikovanje korisnika, mijenjanje lozinki ili slično:

en: The frequency of updating the lists of IP addresses that are reserved (but not RFC 1918) or not yet assigned by IANA.
bs: Frekvencija ažuriranja listi IP adresa koje su rezervisane (ali ne RFC 1918) ili koje još nisu dodijeljene sa IANA.

en: The frequency that this machine will advertise. 0 means usually master. Otherwise the lowest combination of both values in the cluster determines the master.
bs: Frekvencija koju će ova mašina reklamirati. 0 znači master. Inače najniža kombinacija od obje vrijednosti u klasteru određuje master.

en: The gateway "%1$s" is a different Address Family than network "%2$s".
bs: Gejtvej "%1$s" je drugačija familija adresa u odnosu na mrežu "%2$s".

en: The gateway IP address "%s" already exists.
bs: Gateway IP adresa "%s" već postoji.

en: The gateway address %s does not lie within one of the chosen interface's subnets.
bs: Gateway adresa %s ne leži ni na jednoj od interfejsih podmreža.

en: The gateway address %s does not lie within the chosen interface's subnet.
bs: Gateway adresa %s ne leži u subnetu odabranog interfacea.

en: The gateway configuration has been changed.
bs: Gateway konfiguracija je promijenjena.

en: The gateway is disabled but the route is not. The route must be disabled in order to choose a disabled gateway.
bs: Gejtvej je isključen ali ruta nije. Ruta mora biti isključena kako bi odabrali isključeni gejtvej.

en: The gateway name "%s" already exists.
bs: Gateway ime "%s" već postoji.

en: The gateway: %s is invalid or unknown, not using it.
bs: Gateway: %s je nepoznat ili pogrešan, sada se ne koristi.

en: The generated config file cannot be parsed by unbound. Please correct the following errors:
bs: Generisani config fajl ne može biti proslijeđen bez granica. Molimo popravite sljedeće greške

en: The gif tunnel remote address must be IPv4 where tunnel local address is IPv4.
bs: Gif tunnel udaljena adresa mora biti IPv4 gdje tunnel lokalna adresa je IPv4 .

en: The gif tunnel remote address must be IPv6 where tunnel local address is IPv6.
bs: Gif tunnel udaljena adresa mora biti IPv6 gdje tunnel lokalna adresa je IPv6.

en: The gif tunnel subnet must be an integer between 1 and 128.
bs: Gif tunnel subnet mora biti cijeli broj između 1 i 128.

en: The gif tunnel subnet must be an integer between 1 and 32.
bs: Gif tunnel subnet mora biti cijeli broj između 1 i 32.

en: The gif tunnel subnet must be an integer.
bs: Gif tunnel subnet mora biti cijeli broj.

en: The group name cannot end with a digit.
bs: Ime grupe ne može završavati sa cifrom.

en: The group name is longer than 16 characters.
bs: Ime grupe je duže od 16 znakova.

en: The high Packet Loss threshold needs to be 100 or less.
bs: Nisko paketno odstupanje gubitka mora biti 100 ili manje.

en: The high Packet Loss threshold needs to be a numeric value.
bs: Visoko paketno odstupanje gubitka mora biti numerička vrijednost.

en: The high Packet Loss threshold needs to be positive.
bs: Visoko paketno odstupanje gubitka mora biti pozitivno.

en: The high latency threshold needs to be a numeric value.
bs: Visoko latentno odstupanje mora biti numerička vrijednost.

en: The high latency threshold needs to be greater than the low latency threshold
bs: Visoko latentno odstupanje mora biti veće od nisko latentnog odstupanja

en: The high latency threshold needs to be positive.
bs: Visoko latentno odstupanje mora biti pozitivno.

en: The high packet loss threshold needs to be higher than the low packet loss threshold
bs: Visoko paketno odstupanje mora biti veće od nisko paketnog odstupanja.

en: The host name contains invalid characters.
bs: Host ime sadrži znakove koji nisu prihvatljivi.

en: The hostname can only contain the characters A-Z, 0-9 and '-'.
bs: Hostname smije sadržavati samo znakove A-Z, 0-9 i '-'.

en: The hostname can only contain the characters A-Z, 0-9 and '-'. It may not start or end with '-'.
bs: Hostname može sadržavati samo karaktere A-Z, 0-9 i '-'. Ne smije počinjati ili završavati sa '-'.

en: The hostname can only contain the characters A-Z, 0-9, '_' and '-'. It may not start or end with '-'.
bs: Hostname smije sadržavati samo znakove A-Z, 0-9, '_' i '-'. Ne smije počinjati ili završavati sa '-'.

en: The hostname cannot end with a hyphen according to RFC952
bs: Host ime ne može završavati sa crticom po RFC952 pravilima

en: The hostname contains invalid characters.
bs: Hostname sadrži pogrešne karaktere.

en: The hostname is blocked for update abuse.
bs: Ovo host ime je blokirano zbog zloupotrebljavanja ažuriranja

en: The hostname passed could not be matched to any services configured. The service field will be blank in the return code.
bs: Proslijeđeno host ime nije moglo biti upareno niti sa jednim servisom. Ovo polje će ostati prazno pri return kodu.

en: The hostname specified is not a fully-qualified domain name. If no hostnames included, notfqdn will be returned once.
bs: Navedeno host ime nije kvalifikovano ime domene. Ako nijedno host ime nije uključeno, notfqdn će biti vraćeno jednom.

en: The identifier contains invalid characters.
bs: Identifikator sadrži nevaljane znakove.

en: The idle timeout must be at least 1 minute.
bs: Timeout vremena odsustva mora biti bar 1 minuta.

en: The idle timeout value must be an integer.
bs: Timeout pri odsutnosti mora biti cijeli broj.

en: The information listed for each socket is:
bs: Informacije izlistane za svaki od socketa su:

en: The interface IPv4 '%1$s' address on interface '%2$s' is not public, not configuring 6RD tunnel
bs: Interface IPv4 '%1$s' adresa na interfaceu '%2$s' nije javna, ne konfigurišem 6RD prolaz.

en: The interface IPv4 '%1$s' address on interface '%2$s' is not valid, not configuring 6RD tunnel
bs: Interface IPv4 '%1$s' adresa na interfaceu '%2$s' nije validna, ne konfiguriše se 6RD prolaz.

en: The interface chosen for the VIP has no IPv4 or IPv6 address configured so it cannot be used as a parent for the VIP.
bs: Odabrani interface za VIP nema IPv4 ili IPv6 adresu konfigurisanu tako da ne može biti korištena kao parent za VIP.

en: The interface configuration has been changed.
bs: Interface konfiguracija je promijenjena.

en: The interface description cannot contain only numbers.
bs: Interface opis ne smije sadržavati samo brojeve.

en: The interface description cannot start with pkg_
bs: Interface opis ne može počinjati sa pkg_

en: The interface has a traffic shaper queue configured.
    Please remove all queues on the interface to continue.
bs: Interface ima oblikovatelj prometa reda konfigurisan. Molimo uklonite sve redove na interfaceu za nastavak.

en: The interface is part of a bridge. Please remove it from the bridge to continue
bs: Interface je dio bridgea. Molimo uklonite ga iz bridgea za nastavak

en: The interface is part of a gif tunnel. Please delete the tunnel to continue
bs: Interface je dio gif tunnela. Molimo uklonite tunnel za nastavak

en: The interface is part of a gre tunnel. Please delete the tunnel to continue
bs: Interface je dio gre tunnela. Molimo uklonite tunnel za nastavak

en: The interface is part of a group. Please remove it from the group to continue
bs: Interface je dio grupe. Molimo uklonite ga iz grupe za nastavak

en: The interface must be reassigned to configure as %s.
bs: Interface mora biti ponovo dodijeljen da konfiguriše kao %s.

en: The interface on which traffic is matched as it exits the firewall. In most cases this is "WAN" or another externally-connected interface.
bs: Interface na kojem promet se poklapa kao izlazi iz firewalla. U većini slučajeva ovo je "WAN" ili neki drugi eksterno spojen interface.

en: The interface or Virtual IP address where OpenVPN will receive client connections.
bs: Interfejs ili virtualna IP adresa gdje će OpenVPN primati klijentske konekcije.

en: The interface queue will be enforced as default.
bs: Red interfacea će biti iskorišten kako je zadano.

en: The interface to which this TAP instance will be bridged. This is not done automatically. This interface must be assigned and the bridge created separately. This setting controls which existing IP address and subnet mask are used by OpenVPN for the bridge. Setting this to "none" will cause the Server Bridge DHCP settings below to be ignored.
bs: Interfejs za koji će ova TAP instanca biti bridgeovana. Ovo se ne radi automatski. Ovaj interfejs mora biti dodijeljen i bridge stvoren odvojeno. Ova postavka kontroliše koje postojeće IP adrese i subnet maske su korištene od OpenVPNa za bridge. Postavljanje ovog na "none" će uzrokovati Server bridge DHCP postavke da budu ignorisane.

en: The interface used by the firewall to originate this OpenVPN client connection
bs: Interfejs korišten firewallom za stvaranje ove OpenVPN klijent konekcije

en: The interfaces will be assigned as follows:
bs: Interface-i će biti raspoređeni na sljedeći način:

en: The internal IP address (%1$s) and destination IP address (%2$s) are of different address families.
bs: Interna IP adresa (%1$s) i interna IP adresa (%2$s) su različite familije adresa.

en: The invalid MAC address (ff:ff:ff:ff:ff:ff) on interface %1$s has been automatically replaced with %2$s
bs: Pogrešna MAC adresa (ff:ff:ff:ff:ff:ff) na interfaceu %1$s je automatski zamijenjena sa %2$s

en: The key that is fed to the hashing algorithm in hex format, preceeded by "0x", or any string. A non-hex string is hashed using md5 to a hexadecimal key. Defaults to a randomly generated value.
bs: Ključ koji se koristi za hešing algoritam u hex formatu, ispred kojeg je prefiks "0x" ili bilo koji string. Ne heks-string je hešovan koristeći md5 u heksadecimalni ključ. Zadano je nasumično generisana vrijednost.

en: The larger the key, the more security it offers, but larger keys take considerably more time to generate, and take slightly longer to validate leading to a slight slowdown in setting up new sessions (not always noticeable). As of 2016, 2048 bit is the minimum and most common selection and 4096 is the maximum in common use. For more information see %1$s.
bs: Što je ključ veći, veću sigurnost pruža, ali većim ključevima treba više vremena za generisanje i treba im malo duže za validaciju tako da teže blagom usporenju pri postavljanju novih sesija (nije uvijek primijetno). Do 2016, 2048 bita je minimum i najčešći izbor a 4096 je najveći u standardnoj upotrebi. Za više informacija pogledajte %1$s.

en: The length of time in seconds (relative to the time the packet is sent) that the prefix is valid for the purpose of on-link determination.%1$sThe default is 86400 seconds.
bs: Dužina vremena u sekundama (relativno vremenu kad je paket poslan) koji je prefiks validan za zahtjev on-link određivanja. %1$s Zadano je 86400 sekundi.

en: The lifetime associated with the default router in seconds.
bs: Životni vijek povezan sa zadanim routerom u sekundama

en: The line in question reads [%1$d]: %2$s
bs: Linija u pitanju isčitava [%1$d]: %2$s

en: The load balancer configuration has been changed.
bs: Konfiguracija balansera učitanih podataka je promijenjena.

en: The local and remote networks of a phase 2 entry cannot overlap the outside of the tunnel (interface and remote gateway) configured in its phase 1.
bs: Lokalne i udaljene mreže phase2 unosa se ne smiju preklapati izvan tunela (interfejsa i udaljenog gejtveja) konfigurisanog u phase1.

en: The local-zone type used for the pfSense system domain (System | General Setup | Domain).  Transparent is the default.  Local-Zone type descriptions are available in the unbound.conf(5) manual pages.
bs: Tip lokalne zone korišten za pfSense sistemsku domenu (Sistem | Generalne postavke | Domena). Transparentno je zadano. Tip lokalne zone i opisi su dostupni u stranicama unbound.conf(5).

en: The log files have been reset.
bs: Log fajlovi su resetovani.

en: The log is held in a constant-size circular log file. This field controls how large the log file is, and thus how many entries may exist inside the log. The default is approximately 500KB.%1$sNOTE: The log size is changed the next time it is cleared. To immediately change the log size, first save the options to set the size, then clear the log using the "Clear Log" action below.
bs: Log se drži u log fajlu konstantne veličine. Ovo polje kontroliše koliki je log fajl dakle koliko unosa može postojati unutar loga. Zadano je aproksimativno 500KB. %1$sNAPOMENA: Log veličina je promijenjena idući put kad je uklonjena. Da odmah promijenite log veličinu, prvo spasite opcije da postavite veličinu, zatim očistite log koristeći dugme "Očisti log" ispod.

en: The loss interval needs to be a numeric value.
bs: Gubitak intervala mora biti numerička vrijednost

en: The loss interval needs to be greater than or equal to the high latency threshold.
bs: Gubitak intervala mora biti veći ili jednak visoko latentnom odstupanju.

en: The loss interval setting needs to be positive.
bs: Postavke gubitka intervala moraju biti pozitivne

en: The low Packet Loss threshold needs to be a numeric value.
bs: Nisko paketno odstupanje gubitka mora biti numerička vrijednost.

en: The low Packet Loss threshold needs to be less than 100.
bs: Nisko paketno odstupanje gubitka mora biti manje od 100.

en: The low Packet Loss threshold needs to be positive.
bs: Nisko paketno odstupanje gubitka mora biti pozitivno.

en: The low latency threshold needs to be a numeric value.
bs: Nisko latentno odstupanje mora biti numerička vrijednost.

en: The low latency threshold needs to be positive.
bs: Nisko latentno odstupanje mora biti pozitivno.

en: The m0n0wall configuration has been restored and upgraded to pfSense.
bs: m0n0wall konfiguracija je vraćena i ažurirana na pfSense.

en: The margintime must be an integer.
bs: Margintime mora biti integer.

en: The margintime must be smaller than the P1 lifetime.
bs: Margintime mora biti manji od životnog vijeka P1.

en: The mask must be the network's subnet mask. It does not specify a CIDR range.
bs: Maska mora biti mrežna subnet maska. Ne specificira CIDR domet.

en: The maximum lease time must be at least 60 seconds and higher than the default lease time.
bs: Maksimalno vrijeme posudbe mora biti barem 60 sekundi i više od zadanog vremena posudbe.

en: The maximum new connections per host / per second(s) (advanced option) can only be specified for Pass type rules.
bs: Maksimum novih konekcija po hostu / po sekundi (napredna opcija)  može biti specificiran samo za tip Pass pravila.

en: The maximum new connections per host / per second(s) (advanced option) can only be specified for TCP protocol.
bs: Maksimum novih konekcija po hostu / po sekundi (napredna opcija) može biti specificiran samo za TCP protokol.

en: The maximum new connections per host / per second(s) (advanced option) cannot be specified if statetype is none.
bs: Maksimum novih konekcija po hostu / po sekundi (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The maximum number of concurrent connections per client IP address may not be larger than the global maximum.
bs: Maksimalan broj uzastopnih konekcija po klijentskoj IP adresi ne može biti veći od globalnog maksimuma.

en: The maximum number of entries in an alias has been exceeded (%s)
bs: Maksimalan broj unosa aliasa je prekoračen (%s)

en: The maximum number of entries in an alias is %s
bs: Maksimalan broj unosa u aliasu je %s

en: The maximum number of established connections per host (advanced option) can only be specified for Pass type rules.
bs: Maksimalan broj uspostavljenih konekcija po hostu (napredna opcija) može biti specificiran samo za tip Pass pravila.

en: The maximum number of established connections per host (advanced option) can only be specified for TCP protocol.
bs: Maksimalan broj uspostavljenih konekcija po hostu (napredna opcija) može biti specificiran za TCP protokol.

en: The maximum number of established connections per host (advanced option) cannot be specified if statetype is none.
bs: Maksimalan broj uspostavljenih konekcija po hostu (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The maximum number of unique source hosts (advanced option) can only be specified for Pass type rules.
bs: Maksimalan broj jedinstvenih izvornih hostova (napredna opcija) može biti specificiran samo za tip Pass pravila.

en: The maximum number of unique source hosts (advanced option) cannot be specified if statetype is none.
bs: Maksimalan broj jedinstvenih izvornih hostova (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The maximum state entries (advanced option) can only be specified for Pass type rules.
bs: Maksimum unosa stanja (napredna opcija) može biti specificiran samo za tip Pass pravila.

en: The maximum state entries (advanced option) cannot be specified if statetype is none.
bs: Maksimum unosa stanja (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The maximum state entries per host (advanced option) can only be specified for Pass type rules.
bs: Maksimum stanja unosa po hostu (napredna opcija) može biti specificiran samo za tip Pass pravila.

en: The maximum state entries per host (advanced option) cannot be specified if statetype is none.
bs: Maksimum unosa stanja po hostu (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The maximum time allowed between sending unsolicited multicast router advertisements in seconds.
bs: Maksimalno vrijeme dozvoljeno između slanja unsolicited multicast router reklame u sekundama

en: The minimum time allowed between sending unsolicited multicast router advertisements in seconds.
bs: Minimalno vrijeme dozvoljeno između slanja unsolicited multicast router reklame u sekundama

en: The monitor IP address "%s" is already in use. A different monitor IP must be chosen.
bs: Monitor IP adresa "%s" već postoji. Drugi IP monitor se mora koristiti.

en: The monitoring process will flush all states when a gateway goes down if this box is checked.
bs: Ovaj proces praćenja će očistiti sva stanja kada gateway padne ako je ova opcija odabrana.

en: The most recently used branch was "%1$s". (Usually the branch name is master)%2$sNote: Sync will not be performed if a branch is not specified.
bs: Posljednje korištena grana je "%1$s". (Obično je ime grane master)%2$sNapomena: Sinhronizacija neće biti izvršena ako grana nije specificirana.

en: The most recently used repository was %s. This repository will be used if the field is left blank.
bs: Posljednji iskorišten repozitorij je bio %s. Ovaj repozitorij će biti korišten ako se polje ostavi prazno.

en: The name '%s' is a reserved word and cannot be used.
bs: Ime '%s' je rezervisana riječ i ne može biti korištena.

en: The name of an alias can be entered instead of the host, network or port where indicated. The alias will be resolved according to the list above.
bs: Ime aliasa može biti uneseno umjesto hosta, mreže ili porta gdje je napisano. Alias će biti nađen sudeći po listi iznad.

en: The name of the alias may only consist of the characters "a-z, A-Z, 0-9 and _".
bs: Ime aliasa se može sastojati samo od znakova "a-z, A-Z, 0-9 te _".

en: The name of the schedule may only consist of the characters "a-z, A-Z, 0-9 and _".
bs: Ime rasporeda se smije sadržavati samo od znakova "a-z,A-Z,0-9 i _" .

en: The name of the service may only consist of the characters "a-z, A-Z, 0-9 and _".
bs: Ime servisa može sadržavati samo znakove "a-z, A-Z, 0-9 i _".

en: The network address cannot be used for this VIP
bs: Mrežna adresa ne može biti korištena za ovaj VIP

en: The network address cannot be used in the starting subnet range.
bs: Mrežna adresa ne može biti korištena u startnom dometu subneta.

en: The new RRD now has %1$s DS values and %2$s RRA databases
bs: Novi RRD sada ima %1$s DS vrijednosti i %2$s RRA baza podataka

en: The number of LAN type interfaces must be specified.
bs: Broj LAN tip interfejsa mora biti specificiran.

en: The number of LAN type interfaces should be greater than 1.
bs: Broj LAN tip interfejsa mora biti veći od 1.

en: The number of PPPoE users allowed to connect to this server simultaneously.
bs: Broj PPPoE korisnika kojima je dozvoljen simultani pristup ovom serveru.

en: The number of connections must be specified.
bs: Broj konekcija mora biti specificiran.

en: The number of connections should be greater than 1.
bs: Broj konekcija mora biti veći od 1.

en: The number of incoming TCP buffers to allocate per thread. The default value is 10. If 0 is selected then TCP queries are not accepted from clients.
bs: Broj dolazećih TCP bafera za alokaciju po threadu. Zadana vrijednost je 10. Ako je 0 selektovana, tada TCP upiti nisu prihvaćeni od klijenata.

en: The number of outgoing TCP buffers to allocate per thread. The default value is 10. If 0 is selected then TCP queries are not sent to authoritative servers.
bs: Broj odlazećih TCP bafera za alokaciju po threadu. Zadana vrijednost je 10. Ako je 0 selektovano, tada TCP upiti neće biti poslani autoritativnim serverima.

en: The number of queries that every thread will service simultaneously. If more queries arrive that need to be serviced, and no queries can be jostled, then these queries are dropped.
bs: Broj upita koje će svaki thread servisirati simultano. Ako više upita dođe koji trebaju biti servisirani i nijedan upit ne može biti izguran ispred drugog, tada se ovi upiti bacaju.

en: The number of times a single user may be logged in at the same time.
bs: Koliko puta jedan korisnik može biti prijavljen u isto vrijeme.

en: The options on this page are intended for use by advanced users only.
bs: Opcije na ovoj stranici su namijenjene naprednim korisnicima.

en: The options on this page are intended for use by advanced users only. This page is for managing existing mirrors, not creating new mirrors.
bs: Opcije na ovoj stranici su namijenjene za korištenje naprednih korisnika. Ova stranica je za upravljanje već postojećim mirrorima i nije za pravljenje novih mirrora.

en: The order of the selected NCP Encryption Algorithms is respected by OpenVPN.%1$s%2$s%3$s
bs: Redoslijed selektovanih NCP enkripcijskih algoritama se poštuje OpenVPNom. %1$s%2$s%3$s

en: The packet capture will perform a reverse DNS lookup associated with all IP addresses.%sThis option can cause delays for large packet captures.
bs: Paketno snimanje će izvršiti obrnuto DNS traženje asocirano sa svim IP adresama. %s Ova opcija može uzrokovati kašnjenja za velika snimanja paketa

en: The pass-through credit count must be a number or left blank.
bs: Brojač pass-through kredita mora biti broj ili prazno.

en: The password cannot be changed for a non-local user.
bs: Lozinka ne može biti promijenjena za nelokalnog korisnika.

en: The password contains invalid characters.
bs: Lozinka sadrži nevaljane  znakove

en: The passwords do not match.
bs: Lozinke se ne poklapaju.

en: The path to monitor must be set.
bs: Putanja do monitora mora biti postavljena.

en: The port can be either the source or destination port. The packet capture will look for this port in either field. Leave blank if not filtering by port.
bs: Ovaj port može biti ili izvorni ili destinacijski port. Snimanje paketa će tražiti port u nekom od ovih polja. Ostavite prazno ako ne filtrirate po portovima.

en: The port must be an integer between 1 and 65535, a port alias, or left blank.
bs: Port mora biti cijeli broj između 1 i 65535, port alias, ili prazno

en: The port must be an integer between 1 and 65535, or a port alias.
bs: Port mora biti cijeli broj između 1 i 65535, ili alias porta.

en: The port of the master voucher node's webConfigurator. Example: 443
bs: Port master vaučerovog čvora webConfigurator-a. Primjer:443

en: The port used by OpenVPN to receive client connections.
bs: Port koji koristi OpenVPN za primanje klijent konekcija.

en: The port used by the server to receive client connections.
bs: Port korišten od servera za primanje klijent konekcija.

en: The port used for responding to DNS queries. It should normally be left blank unless another service needs to bind to TCP/UDP port 53.
bs: Port korišten za odgovarajuće DNS upite. Obično bi trebao biti ostavljen praznim osim ako drugi servis treba da se spoji na TCP/UDP port 53.

en: The powerd utility monitors the system state and sets various power control options accordingly.  It offers four modes (maximum, minimum, adaptive and hiadaptive) that can be individually selected while on AC power or batteries. The modes maximum, minimum, adaptive and hiadaptive may be abbreviated max, min, adp, hadp.	 Maximum mode chooses the highest performance values.  Minimum mode selects the lowest performance values to get the most power savings. Adaptive mode attempts to strike a balance by degrading performance when the system appears idle and increasing it when the system is busy.  It offers a good balance between a small performance loss for greatly increased power savings.  Hiadaptive mode is alike adaptive mode, but tuned for systems where performance and interactivity are more important than power consumption.	 It raises frequency faster, drops slower and keeps twice lower CPU load.
bs: Powerd prati sistemsko stanje i postavlja razne opcije kontrolisanja energije u skladu s rezultatima. Nudi četiri načina rada (maksimalan, minimalan, adaptivni i hiadaptivni) koji mogu biti individualno odabrani dok radi na AC priključak ili baterije. Ovi načini mogu biti skraćeno napisani kao max, min, adp, hadp. Maksimalni način bira najviše vrijednosti za performanse. Minimalni način bira najniže vrijednosti za performanse radi štednje energije. Adaptivni način pokušava da nađe balans u degradiranju performanski kada je sistem neaktivan i povećava ih kada je sistem zauzet. Nudi dobar balans između manjih gubitaka u performansama ali povećanu štednju energije. Hiadaptivni način je poput adaptivnog, ali napravljen za sisteme gdje su performanse i interaktivnost puno bitniji od potrošnje energije. Diže frekvenciju brže, opada sporije i drži CPU opterećenje duplo niže.

en: The prefix (upper %1$s bits) must be zero.  Use the form %2$s
bs: Prefiks (gornjih %1$s bita) moraju biti nule. Koristite formu %2$s

en: The priority must be an integer between 1 and 15.
bs: Prioritet mora biti cijeli broj između 1 i 15.

en: The priority selected here defines in what order failover and balancing of links will be done. Multiple links of the same priority will balance connections until all links in the priority will be exhausted. If all links in a priority level are exhausted then the next available link(s) in the next priority level will be used.
bs: Prioritet selektovan ovdje definiše u kojem redoslijedu failover i balansiranje linkova će biti izvršeno. Višestruki linkovi istog prioriteta će balansirati konekcije dok svi linkovi u prioritetnoj listi ne budu iskorišteni. Ako svi budu iskorišteni, tada sljedeći dostupan link (linkovi) u sljedećem nivou prioritetne liste će biti korišteni.

en: The probe interval needs to be a numeric value.
bs: Istražni interval mora biti numerička vrijednost

en: The probe interval needs to be positive.
bs: Istražni interval mora biti pozitivan

en: The programming debug logs can be submitted to the pfSense developers for inspection.
bs: Programerski zapis o debugiranju može biti poslan pfSense developerima za uvid.

en: The proxy username contains invalid characters.
bs: Proxy korisničko ime sadrži nevaljane karaktere.

en: The range is invalid (first element higher than second element).
bs: Domet nije validan (prvi element veći od drugog).

en: The ratio of the probe interval to the time period (minus the loss interval) also controls the resolution of loss reporting. To determine the resolution, the following formula can be used:
bs: Odnos testnog intervala sa vremenskim periodom (minus interval gubitka) također kontroliše rezoluciju vraćanja grešaka. Za određivanje ove vrijednosti, možete koristiti sljedeću formulu:

en: The remote gateway "%1$s" is already used by phase1 "%2$s".
bs: Zadani gejtvej "%1$s" se već koristi sa phase1 "%2$s".

en: The remote gateway %s already exists on another phase 1 entry
bs: Remote gateway %s već postoji u drugom unosu faze 1

en: The retry value must be an integer between 1 and 65535.
bs: Retry vrijednost mora biti cijeli broj između 1 i 65535.

en: The rule that triggered this action is
bs: Pravilo koje uključuje ovu radnju je

en: The same interface cannot be selected for local and outside.
bs: Isti interfejs ne može biti selektovan za lokalno i nelokalno.

en: The same interface cannot be selected twice on local interfaces.
bs: Isti interfejs ne može biti selektovan dva puta na lokalnim interfejsima.

en: The schedule must have at least one time range configured.
bs: Raspored mora imati bar jedan interval vremena konfigurisan.

en: The selected Encryption Algorithm is not valid.
bs: Odabrani enkripcijski algoritam nije validan.

en: The selected certificate is not valid
bs: Selektovani certifikat nije validan

en: The server must return the client IP address as a string in the following format:
bs: Server mora vratiti klijentovu IP adresu kao string u ovom formatu:

en: The service name contains invalid characters.
bs: Servisno ime sadrži nekorektne/pogrešne znakove.

en: The settings cannot be managed for a non-local user.
bs: Postavke ne možete mijenjati za nelokalne korisnike.

en: The settings have already been applied!
bs: Postavke su već primijenjene!

en: The source and destination IP addresses must have the same family (IPv4 / IPv6).
bs: Izvorne i destinacijske IP adrese moraju biti iste familije (IPv4/IPv6).

en: The source tracking table has been flushed successfully.
bs: Izvorna tablica praćenja je poravnana uspješno.

en: The specified 'Local port' is in use. Please select another value
bs: Specificirani 'Lokalni Port' se koristi. Molimo odaberite drugu vrijednost

en: The specified DH Parameter length is invalid or the DH file does not exist.
bs: Specificirana dužina DH parametra nije validna ili DH fajl ne postoji.

en: The specified ECDH Curve is invalid.
bs: Specificirana ECDH krivulja nije validna.

en: The specified IPv6 Prefix ID is out of range.
bs: Specificirani IPv6 prefiksni ID je izvan dometa.

en: The specified bandwidth cannot be less than 1.
bs: Specificirani protok ne može biti manji od 1.

en: The specified number of connections is greater than the number of ALTQ-capable assigned interfaces!
bs: Specificirani broj konekcija je veći od broja ALTQ-dostupnih dodijeljenih interfejsa!

en: The specified range lies outside of the current subnet.
bs: Specificirani domet leži izvan dometa trenutnog subneta.

en: The specified range must not be within the DHCP range for this interface.
bs: Specificirani domet ne smije biti unutar DHCP dometa za ovaj interface.

en: The specified range must not be within the range configured on a DHCP pool for this interface.
bs: Specificirani domet ne smije biti domet konfigurisan na DHCP poolu za ovaj interface.

en: The specified record is invalid.
bs: Specificirani unos je pogrešan.

en: The specified server address is equal to an interface ip address.
bs: Specificirana adresa servera je jednaka interface ip adresi.

en: The specified server address is equal to the LAN interface address.
bs: Specificirana server adresa je ista kao LAN interfejs adrea.

en: The specified server address lies in the remote subnet.
bs: Specificirana server adresa leži u udaljenom subnetu.

en: The specified type is invalid.
bs: Specificirani tip je pogrešan.

en: The specified value is invalid.
bs: Specificirana vrijednost je pogrešna.

en: The state table has been flushed successfully.
bs: Tablica stanja je poravnana uspješno.

en: The state timeout (advanced option) can only be specified for Pass type rules.
bs: Timeout stanje (napredna opcija) može biti specificiran samo za tip Pass pravila.

en: The state timeout (advanced option) can only be specified for TCP protocol.
bs: Stanje timeouta (napredna opcija) može biti specificirano samo za TCP protokol.

en: The state timeout (advanced option) cannot be specified if statetype is none.
bs: Timeout stanja (napredna opcija) ne može biti specificiran ako je statetype nijedan.

en: The static mapping configuration has been changed.
bs: Konfiguracija statičkog mapiranja je promijenjena.

en: The static route configuration has been changed.
bs: Konfiguracija statičkih ruta je promijenjena.

en: The submitted interface does not exist.
bs: Odabrani interfejs ne postoji.

en: The submitted mode is not valid.
bs: Poslani mod nije validan.

en: The submitted private key does not match the submitted certificate data.
bs: Poslani privatni ključ se ne poklapa sa poslanim podacima o certifikatu.

en: The submitted relay protocol is not valid.
bs: Poslani relay protokol nije validan.

en: The subnet is used for determining the network that is tunnelled.
bs: Subnet se koristi za određivanje mreže koja je tunnelovana.

en: The subnet range cannot overlap with virtual IP address %s.
bs: Subnet domet se ne može poklapati sa virtualnom IP adresom %s.

en: The subnet range cannot overlap with virtual IPv6 address %s.
bs: Subnet domet se ne smije preklapati sa virtualnom IPv6 adresom %s.

en: The supplied Send/Receive Buffer size is invalid.
bs: Data veličina buffera slanja/primanja nije valjana.

en: The supplied value for NTP Orphan Mode is invalid.
bs: Data vrijednost za NTP Orphan način nije validna

en: The system has been reset to factory defaults and is now rebooting. This may take a few minutes, depending on the hardware.
bs: Sistem je vraćen na tvorničke zadane postavke i sada se ponovo pokreće. Ovo može potrajati par minuta, u ovisnosti od hardvera.

en: The system is halting now. This may take one minute or so.
bs: Sistem se zaustavlja. Ovo će potrajati minutu.

en: The system is now rebooting. Please wait.
bs: Sistem se ponovo pokreće. Molimo sačekajte.

en: The system is on a later version than official release.
bs: System je na kasnijoj verziji od zvanično dostupne verzije.

en: The system is on the latest version.
bs: Sistem je ažuriran na posljednju verziju.

en: The system will attempt to calculate the bandwidth delay product for each connection and limit the amount of data queued to the network to just the amount required to maintain optimum throughput.
bs: Sistem će pokušati izračunati propusnost produkta odgađanja za svaku konekciju i limitirati količinu podataka poredanih na mrežu da bi samo količina potrebna za održavanje optimalnog opstala.

en: The target port range must be an integer between 1 and 65535.
bs: Interval ciljanih portova mora biti cijeli broj između 1 i 65535.

en: The time period needs to be greater than twice the probe interval plus the loss interval.
bs: Vremenski period mora biti dva puta veći od istražnog intervala + intervala gubitka.

en: The time period over which results are averaged needs to be a numeric value.
bs: Vremenski period oko kojeg tražimo prosjek rezultata mora biti numerička vrijednost.

en: The time period over which results are averaged needs to be positive.
bs: Vremenski period oko kojeg tražimo prosjek rezultata mora biti pozitivan.

en: The time period, probe interval and loss interval are closely related. The ratio between these values control the accuracy of the numbers reported and the timeliness of alerts.
bs: Vremenski period, interval testiranja i interval gubitka su usko povezani. Odnos između ovih vrijednosti kontroliše preciznost brojeva koji su prijavljeni te vremensku učestalost upozorenja.

en: The timeout must be at least 1 minute.
bs: Timeout mora biti barem 1 minuta.

en: The total size limit for all files is %s.
bs: Ukupan limit veličine za sve fajlove je %s.

en: The total size of all files uploaded may not exceed %s.
bs: Ukupna veličina svih fajlova koji su uploadani ne može preći %s.

en: The traffic shaper configuration has been changed.
bs: Konfiguracija oblikovanja prometa je promijenjena.

en: The tree on the left navigates through the %s.
bs: Stablo na lijevoj strani navigira kroz %s.

en: The tunnel local and tunnel remote fields must have valid IP addresses.
bs: Tunnelska lokalna i tunnelska udaljena polja moraju imati validne IP adrese.

en: The type of authentication used by the proxy server.
bs: Tip autentikacije korišten od proxy servera.

en: The uploaded file does not appear to contain an encrypted pfsense configuration.
bs: Uploadani fajl ne sadrži enkriptovanu pfsense konfigurraciju.

en: The upstream network interface is the outgoing interface which is responsible for communicating to available multicast data sources. There can only be one upstream interface.%1$sDownstream network interfaces are the distribution	interfaces to the destination networks, where multicast clients can join groups and receive multicast data. One or more downstream interfaces must be configured.
bs: Upstream mrežni interface je jedini outgoing interface koji je odgovoran za komuniciranje za dostupne multicast izvore podataka. Može postojati samo jedan upstream interface.%1$sDownstream mrežni interfejsi su distributivni  interfejsi za destinacijske mreže, gdje multicast klijenti se mogu pridružiti grupama i dobiti multicat podatke. Jedan ili više downstream interfaceova mora biti konfigurisan.

en: The username contains invalid characters.
bs: Korisničko ime sadrži pogrešne karaktere.

en: The username is longer than 16 characters.
bs: Korisničko ime je duže od 16 znakova.

en: The value after the "/" is the update frequency in days.
bs: Vrijednost nakon znaka "/" je frekvencija ažuriranja po danima

en: The value in this field is sent as the DHCP client identifier and hostname when requesting a DHCP lease. Some ISPs may require this (for client identification).
bs: Vrijednost u ovom polju je poslana kao DHCP klijent indentifikator i hostname kada se zahtijeva posudba DHCPa. Neki ISPovi će zahtijevati ovo (za klijent identifikaciju).

en: The value in this field is the delegated prefix length provided by the DHCPv6 server. Normally specified by the ISP.
bs: Vrijednost u ovom polju je delegirana dužina prefiksa obezbijeđena od strane DHCPv6 servera. Normalno specificirana ISPom.

en: The value in this field is the full absolute path to a DHCP client configuration file.	 [/[dirname/[.../]]filename[.ext]] %1$sValue Substitutions in Config File: {interface}, {hostname}, {mac_addr_asciiCD}, {mac_addr_hexCD} %1$sWhere C is U(pper) or L(ower) Case, and D is " :-." Delimiter (space, colon, hyphen, or period) (omitted for none).%1$sSome ISPs may require certain options be or not be sent.
bs: Vrijednost u ovom polju je apsolutna putanja za DHCP klijentni konfiguracijski fajl. [/[dirname/[.../]]filename[.ext]] %1$sVrijednost zamjena u config fileu: {interface}, {hostname}, {mac_addr_asciiCD}, {mac_addr_hexCD} %1$sGdje je C U(pper) (veliko)ili L(ower)(malo) slovo i D je " :-." delimiter (razmak, dvotačka, pavlaka, tačka ili zarez) (ne može biti ništa). %1$s Neki ISPovi traže dodatne opcije da se pošalju ili ne.

en: The value in this field is used as a fixed alias IPv4 address by the DHCP client.
bs: Vrijednost u ovom polju je korištena kao fiksna alias IPv4 adresa od DHCP klijenta.

en: The value may only contain alphanumeric characters, -, _, %, and /.
bs: Vrijednost može sadržavati samo alfanumeričke znakove, -, _, % i /.

en: The values in these fields are DHCP protocol timings used when requesting a lease.%1$sSee %2$shere%3$s for more information
bs: Vrijednosti u ovim poljima su DHCP protokol tajminzi koji se koriste kada je potrebna posduba.%1$s Pogledajte %2$sovdje%3$s za više informacija

en: The virtual IP addresses defined on this page may be used in %1$sNAT%2$s mappings.
bs: Virtualne IP adrese definisane na ovoj stranici mogu biti korištene u %1$sNAT%2$s mapiranjima

en: The virtual IP field selects which (virtual) IP should be used when this group applies to a local Dynamic DNS, IPsec or OpenVPN endpoint.
bs: Polje virtual IP selektuje koji (virtuelni) IP treba biti korišten kada se ova grupa primijeni na lokalni dinamički DNS, IPsec ili OpenVPN krajnju tačku.

en: The virtual IPv4 network used for private communications between this client and the server expressed using CIDR (e.g. 10.0.8.5/24). %1$sWith subnet topology, enter the client IP address and the subnet mask must match the IPv4 Tunnel Network on the server. %1$sWith net30 topology, the first network address of the /30 is assumed to be the server address and the second network address will be assigned to the client.
bs: Virtualna IPv4 mreža korištena za privatnu komunikaciju između ovog klijenta i servera izraženog preko CIDR (npr. 10.0.8.5/24) %1$sSa subnet topologijom, unesite klijentsku IP adresu i subnet masku koji se moraju poklapati sa IPv4 tunel mrežom na serveru. %1$sSa net30 topologijom, prva mrežna adresa od /30 je pretpostavljena da je server adresa i druga mrežna adresa će biti dodijeljena klijentu.

en: The virtual IPv6 network used for private communications between this client and the server expressed using prefix (e.g. 2001:db9:1:1::100/64). %1$sEnter the client IPv6 address and prefix. The prefix must match the IPv6 Tunnel Network prefix on the server.
bs: Virtualna IPv6 mreža korištena za privatne konekcije između ovog klijenta i servera izraženog preko prefiksa (npr. 2001:db9:1:1::100/64). %1$sUnesite klijentsku IPv6 adresu i prefiks. Prefiks se mora poklapati sa IPv6 tunnel mrežnim prefiksom servera.

en: The virtual server configuration has been changed.
bs: Konfiguracija virtualnog servera je promijenjena.

en: The voucher database cannot be sync'd to this host (itself).
bs: Vaučer baza podatak ne može biti sinhronizirana sa ovim hostom (sama sa sobom).

en: The waiting period to restore pass-through credits must be above 0 hours.
bs: Period čekanja za vraćanje pass-through kredita mora biti iznad 0 sati.

en: The zone name can only contain letters, digits, and underscores ( _ ).
bs: Ime zone može sadržavati samo slova, cifre i donje crte (_).

en: Theme
bs: Tema

en: There apparently was not an error, and this page was navigated to directly without any instructions for what it should do.
bs: Naizgled nije pronađena greška te smo preusmjereni na ovu stranicu bez ikakvih instrukcija šta bi trebalo raditi.

en: There are additional Local and Remote IP addresses defined for MLPPP.
bs: Postoje dodatne lokalne i udaljene IP adrese definirane za MLPPP.

en: There are no configured IPsec Tunnels
bs: Nema konfigurisanih IPsec tunela.

en: There are no packages currently installed.
bs: Nema paketa koji su trenutno instalirani.

en: There is a Phase 2 using IPv4, cannot use IPv6.
bs: Postoji Phase 2 koji koristi IPv4 i ne može koristiti IPv6.

en: There is a Phase 2 using IPv6, cannot use IPv4.
bs: Postoji Phase 2 koji koristi IPv6 i ne može koristiti IPv4.

en: There is a conflict on MTU between parent %1$s and VLAN(%2$s)
bs: Pronađeno preklapanje na MTU između parenta %1$s i VLAN(%2$s)

en: There was a error parsing log entry: %s. Please report to mailing list or forum.
bs: Pojavila se greška pri parsiranju log zahtjeva: %s. Molimo prijavite mailing listi ili forumu.

en: There was a error parsing rule number: %s. Please report to mailing list or forum.
bs: Pojavila se greška prilikom parsiranja pravila broj: %s. Molimo prijavite mailing listi ili forumu.

en: There was a error parsing rule: %s. Please report to mailing list or forum.
bs: Pojavila se greška prilikom parsiranja pravila: %s. Molimo prijavite mailing listi ili forumu.

en: There was a problem applying the changes. See the %1$sSystem Logs%2$s.
bs: Pojavio se problem prilikom primjenjivanja promjena. Pogledaj %1$sSistemski logovi%2$s.

en: There was an error performing the chosen mirror operation. Check the System Log for details.
bs: Pronađen error prilikom izvršavanja željene mirror operacije. Provjerite sistemski log za detalje.

en: There was an error while parsing the package filter rules for %s.
bs: Pronađena je greška prilikom parsiranja paketnog filtera za %s

en: There were error(s) loading the rules: %1$s - %2$s
bs: Naišao sam na grešku/e prilikom učitavanja pravila:  %1$s - %2$s

en: Thermal Sensors
bs: Termalni senzori

en: These are also used for the DHCP service, DNS Forwarder and DNS Resolver when it has DNS Query Forwarding enabled.
bs: Ovo se koristi i za DHCP servis, DNS forwarder i DNS resolver kada ima DNS forwardanje upita uključeno.

en: These are the IPv4 client-side networks that will be routed to this client specifically using iroute, so that a site-to-site VPN can be established. Expressed as a comma-separated list of one or more CIDR ranges. May be left blank if there are no client-side networks to be routed.%1$sNOTE: Remember to add these subnets to the IPv4 Remote Networks list on the corresponding OpenVPN server settings.
bs: Ovo su IPv4 mreže sa klijenta koje će biti preusmjerene ka ovom klijentu specifično koristeći iroute, tako da site-to-site VPN može biti uspostavljen. Izražen kao zarezom razdvojena lista jednog ili više CIDR dometa. Može biti ostavljeno prazno ako nema klijentskih mreža za preusmjeravanje. %1$sNAPOMENA: Zapamtite da dodate ove subnete IPv4 listi udaljenih mreža na odgovarajućim OpenVPN postavkama.

en: These are the IPv4 server-side networks that will be accessible from this particular client. Expressed as a comma-separated list of one or more CIDR networks. %1$sNOTE: Networks do not need to be specified here if they have already been defined on the main server configuration.
bs: Ovo su IPv4 mreže sa servera koje će biti dostupne sa ovog klijenta. Izražene kao zarezom razdvojena lista jedne ili više CIDR mreža. %1$sNAPOMENA: Mreže ne moraju biti specificirane ovdje ako su već definisane na glavnoj serverskoj konfiguraciji.

en: These are the IPv6 client-side networks that will be routed to this client specifically using iroute, so that a site-to-site VPN can be established. Expressed as a comma-separated list of one or more IP/PREFIX networks. May be left blank if there are no client-side networks to be routed.%1$sNOTE: Remember to add these subnets to the IPv6 Remote Networks list on the corresponding OpenVPN server settings.
bs: Ovo su IPv6 mreže sa klijenta koje će biti preusmjerene ka ovom klijentu specifično koristeći iroute, tako da site-to-site VPN može biti uspostavljen. Izražen kao zarezom razdvojena lista jedne ili više IP/PREFIX mreža. Može biti ostavljeno prazno ako nema klijentskih mreža za preusmjeravanje. %1$sNAPOMENA: Zapamtite da dodate ove subnete IPv6 listi udaljenih mreža na odgovarajućim OpenVPN postavkama.

en: These are the IPv6 networks that will be routed through the tunnel, so that a site-to-site VPN can be established without manually changing the routing tables. Expressed as a comma-separated list of one or more IP/PREFIX. If this is a site-to-site VPN, enter the remote LAN/s here. May be left blank for non site-to-site VPN.
bs: Ovo su IPv6 mreže koje će biti preusmjerene kroz tunnel, tako da site-to-site VPN može biti uspostavljen bez ručnog mijenjanja routing tablica. Izraženo kao zarezom razdvojena lista jednog ili više IP/PREFIX-a. Ako je ovaj site-to-site VPN, unesite udaljene LAN/ove ovdje. Može biti ostavljeno prazno za bez site-to-site VPNa.

en: These are the IPv6 server-side networks that will be accessible from this particular client. Expressed as a comma-separated list of one or more IP/PREFIX networks.%1$sNOTE: Networks do not need to be specified here if they have already been defined on the main server configuration.
bs: Ovo su IPv6 mreže sa servera koje će biti dostupne sa ovog klijenta. Izražene kao zarezom razdvojena lista jedne ili više IP/PREFIX mreža. %1$sNAPOMENA: Mreže ne moraju biti specificirane ovdje ako su već definisane na glavnoj serverskoj konfiguraciji.

en: These options allow certain panels to be automatically hidden on page load. A control is provided in the title bar to un-hide the panel.
bs: Ove opcije dozvoljavaju određenim panelima da se automatski minimiziraju na učitavanju stranice. Kontrola je dostupna u naslovnoj traci da bi se maksimizirao panel.

en: These options create an RFC 2893 compatible mechanism for IPv4 NAT encapsulation of IPv6 packets, that can be used to tunnel IPv6 packets over IPv4 routing infrastructures. IPv6 firewall rules are %1$salso required%2$s, to control and pass encapsulated traffic.
bs: Ove opcije kreiraju RFC 2893 kompatibilni mehanizam za IPv4 NAT enkapsulaciju IPv6 paketa koji mogu biti korišteni za tuneliranje IPv6 paketa preko IPv4 routing infrastruktura. IPv6 firewall pravila su %1$stakođer potrebna%2$s za kontrolu i prolazak/verifikaciju enkapsuliranog prometa.

en: These options enable additional messages from NTP to be written to the System Log %1$sStatus > System Logs > NTP%2$s
bs: Ove opcije uključuju dodatne poruke od NTPa te mogućnost njihovog pisanja u sistemski log fajl%1$sStatus > Sistemski Logovi > NTP%2$s

en: These settings may affect which channels are available and the maximum transmit power allowed on those channels. Using the correct settings to comply with local regulatory requirements is recommended.%1$sAll wireless networks on this interface will be temporarily brought down when changing regulatory settings.  Some of the regulatory domains or country codes may not be allowed by some cards.	These settings may not be able to add additional channels that are not already supported.
bs: Ove postavke mogu uticati na to koji su kanali dostupni i na maksimalnu snagu prenošenja koja je dozvoljena natim kanalima. Koristeći tačne postavke za poklapanje sa lokalnim regulatornim zahtjevima je preporučeno. %1$s Sve wireless mreže na ovom interfaceu će biti privremeno ugašene prilikom mijenjanja regulatornih postavki. Neke od regulatornih domena ili kodova zemalja nisu dozvoljene od strane nekih kartica. Ove postavke će možda učiniti da ne možete dodati nove kanale koji već nisu podržani.

en: These settings override the "General Logging Options" settings.
bs: Ove postavke overrideaju "Generalne opcije postavki" postavke.

en: They must be either both IPv4 or both IPv6 addresses.
bs: Oba moraju biti IPv4 ili IPv6 adrese.

en: Third Party Credits
bs: Povjerenja trećeg lica

en: This Firewall
bs: Ovaj firewall

en: This Firewall (self)
bs: Ovaj firewall

en: This GRE tunnel cannot be deleted because it is still being used as an interface.
bs: Ovaj GRE tunnel ne može biti obrisan jer se još koristi kao interface.

en: This Hostname, IP or DUID already exists.
bs: Ovaj hostname, IP ili DUID već postoji

en: This IP address is being used by another interface or VIP.
bs: Ova IP adresa je korištena od strane drugog interfacea ili VIPa.

en: This IPv4 address conflicts with a Static Route.
bs: Ova IPv4 adresa se sukobi sa statičnom rutom.

en: This IPv4 address is the broadcast address and cannot be used
bs: Ova IPv4 adresa je adresa prenosa i ne može se koristiti

en: This IPv4 address is the network address and cannot be used
bs: Ova IPv4 adresa je mrežna adresa i ne može se koristiti

en: This IPv6 address conflicts with a Static Route.
bs: Ova IPv6 adresa se sukobi sa statičnom rutom.

en: This LAGG interface cannot be deleted because it is still being used.
bs: Ovaj LAGG interface ne može biti obrisan jer se još koristi.

en: This QinQ cannot be deleted because it is still being used as an interface.
bs: Ovaj QinQ ne može biti obrisan jer se još uvijek koristi kao interface.

en: This VLAN cannot be deleted because it is still being used as an interface.
bs: Ovaj VLAN ne može biti obrisan jer se još uvijek koristi kao interface.

en: This account has been administratively locked.
bs: Ovaj korisnički račun je zaključan od strane administratora.

en: This allows for communications with hosts that generate fragmented packets with the don't fragment (DF) bit set. Linux NFS is known to do this. This will cause the filter to not drop such packets but instead clear the don't fragment bit.
bs: Ovo dozvoljava komunikaciju sa hostovima koji generišu fragmentirane pakete sa ne fragment (DF) bit setom. Linux NFS ovo radi. Ovo će uzrokovati da filter ne otklanja takve pakete, već da čisti nefragmentirani bit.

en: This bridge cannot be deleted because it is assigned as an interface.
bs: Ovaj bridge ne može biti obrisan jer je dodijeljen kao interface

en: This can be either an IP address, fully qualified domain name or an e-mail address.
bs: Ovo može biti IP adresa, puno kvalifikovano ime ili e-mail adresa.

en: This certificate does not appear to be valid.
bs: Ovaj certifikat ne izgleda kao validan.

en: This device is currently being maintained by: %s.
bs: Ovaj uređaj trenutno održava: %s

en: This does NOT prevent the rule from being overwritten on Slave.
bs: Ovo ne sprječava ovo pravilo od pisanja preko njega na Slaveu

en: This doesn't look like an RSA Private key.
bs: Ovo ne izgleda kao RSA privatni ključ.

en: This doesn't look like an RSA Public key.
bs: Ovo ne izgleda kao RSA javni ključ

en: This entry cannot be deleted because it is still referenced by OpenVPN %1$s %2$s.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran sa OpenVPN %1$s %2$s.

en: This entry cannot be deleted because it is still referenced by a CARP IP with the description %s.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran CARP IPom sa opisom %s.

en: This entry cannot be deleted because it is still referenced by an IP alias entry with the description %s.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran IP alias unosom sa opisom %s.

en: This entry cannot be deleted because it is still referenced by at least one Gateway.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran barem jednim Gatewayem.

en: This entry cannot be deleted because it is still referenced by at least one NAT mapping.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran u bar jednom NAT mapiranju.

en: This entry cannot be deleted because it is still referenced by at least one pool.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran od strane barem jednogpoola

en: This entry cannot be deleted because it is still referenced by at least one virtual server.
bs: Ovaj unos ne može biti obrisan jer je još uvijek referenciran od strane bar jednog virtuelnog servera.

en: This field can be used to modify ("spoof") the MAC address of this interface.%sEnter a MAC address in the following format: xx:xx:xx:xx:xx:xx or leave blank.
bs: Ovo polje se može koristiti za modifikaciju ("lažne") MAC adrese ovog interfacea.%sUnesite MAC adresu u sljedećem formatu: xx:xx:xx:xx:xx:xx ili ostavite prazno.

en: This field can be used to tune ACK/CTS timers to fit the distance between AP and Client
bs: Ovo polje se može koristiti za štimanje ACK/CTS tajmera da odgovaraju udaljenosti između pristupne tačke i klijenta

en: This field can usually be left empty.
bs: Ovo polje može često ostati prazno.

en: This field can usually be left empty. Service name will not be configured if this field is empty. Check the "Configure NULL" box to configure a blank Service name.
bs: Ovo polje se često može ostaviti prazno. Servisno ime neće biti konfigurisano ako je ovo polje prazno. Provjerite "Configure NULL" polje da konfigurišete prazno servisno ime.

en: This firewall (self)
bs: Ovaj firewall

en: This firewall does not have any LAN-type interfaces assigned that are capable of using ALTQ traffic shaping.
bs: Ovaj firewall ne sadrži nijedan LAN tip interfejsa dodijeljen koji je u mogućnosti da koristi ALTQ upravljanje prometa.

en: This firewall does not have any WAN-type interfaces assigned that are capable of using ALTQ traffic shaping.
bs: Ovaj firewall ne sadrži nijedan WAN tip interfejsa dodijeljen koji je u mogućnosti da koristi ALTQ upravljanje prometa.

en: This firewall does not have any interfaces assigned that are capable of using ALTQ traffic shaping.
bs: Ovaj firewall nema nijedan interface dodijeljen koji je u stanju da koristi ALTQ upravljanje prometa.

en: This fully qualified hostname (Hostname + Domainname), IP, MAC address or Client identifier already exists.
bs: Puno zadovoljeno host ime (host ime + ime domene), IP, MAC adresa ili klijent identifikator već postoje.

en: This gateway is inactive because interface is missing
bs: Ovaj gejtvej nije aktivan jer nedostaje interface

en: This gif TUNNEL cannot be deleted because it is still being used as an interface.
bs: Ovaj gif TUNNEL ne može biti obrisan jer se još koristi kao interface

en: This helps lower the latency of requests but does utilize a little more CPU. See: %1$sWikipedia%2$s
bs: Ovo pomaže u smanjenju kašnjenja zahtjeva ali zahtijeva više CPU. Pogledajte: %1$sWikipedia%2$s

en: This host/domain override combination already exists with an IPv4 address.
bs: Ovaj host/domena kombinacija overridea već postoji sa datom IPv4 adresom.

en: This host/domain override combination already exists with an IPv6 address.
bs: Ovaj host/domen override kombinacija već postoji sa datom IPv6 adresom.

en: This interface and MAC address wake-on-LAN entry already exists.
bs: Ovaj interface i MAC adresa wake-on-LAN unos već postoje

en: This interface is referenced by IPv4 VIPs. Please delete those before setting the interface to 'none' configuration.
bs: Ovaj interface je referenciran samo sa IPv4 VIPovima. Molimo obrišite ih prije no postavite konfiguraciju na 'none'

en: This interface is referenced by IPv6 VIPs. Please delete those before setting the interface to 'none' configuration.
bs: Ovaj interface je referenciran sa IPv6 VIPovima. Molimo obrišite ih prije postavlja konfiguracije interfacea na 'none'.

en: This interface serves as the local address to be used for the GIF tunnel.
bs: Ovaj interface služi kao lokalna adresa za GIF tunnel.

en: This interface serves as the local address to be used for the GRE tunnel.
bs: Ovaj interface služi kao lokalna adresa za GRE tunnel.

en: This is a summary of the last %1$s lines of the firewall log (Max %2$s).
bs: Ovo je sažetak posljednjih %1$s linija firewall loga (Maksimalno %2$s).

en: This is a test message from %s.  It is safe to ignore this message.
bs: Ovo je test poruka sa %s. Sigurno je izignorisati je.

en: This is a test message from %s. It is safe to ignore this message.
bs: Ovo je test poruka sa %s. Sigurno je izignorisati je.

en: This is almost always the same as the Interface to Monitor.
bs: Ovo je gotovo uvijek isto kao interface za praćenje

en: This is how many seconds it will wait for the SMTP server to connect. Default is 20s.
bs: Ovo je koliko će sekundi čekati SMTP server za konekciju. Zadano je 20s

en: This is known as the "group" setting on some VPN client implementations
bs: Ovo je poznato kao "grupna" postavka na nekim VPN klijent implementacijama

en: This is known to kick Windows into recognizing pushed DNS servers.
bs: Ovo je poznato da kicka Windows u prepoznavanje pushed DNS servera.

en: This is normally the WAN IP address for the server to listen on. All connections to this IP and port will be forwarded to the pool cluster. A host alias listed in Firewall -&gt; Aliases may also be specified here.
bs: Ovo je obično WAN IP adresa za server koji posmatramo. Sve konekcije na ovu IP adresu i port će biti proslijeđeni pool klasteru. Host alias naveden u Firewall -&gt; Aliasi može biti specificiran ovdje.

en: This is only the number of log entries displayed in the GUI. It does not affect how many entries are contained in the actual log files.
bs: Ovo je broj log unosa prikazan u GUIu. Ne utiče na to koliko unosa se sastoji u stvarnim log fajlovima.

en: This is the DHCPv6 Unique Identifier (DUID) used by the firewall when requesting an IPv6 address. %1$sBy default, the firewall automatically creates a dynamic DUID which is not saved in the firewall configuration. To ensure the same DUID is retained by the firewall at all times, enter a DUID in this field. The new DUID will take effect after a reboot or when the WAN interface(s) are reconfigured by the firewall.%1$sIf the firewall is configured to use a RAM disk for /var, the best practice is to store a DUID here otherwise the DUID will change on each reboot.%1$s%1$sYou may use the Copy DUID button to copy the system detected DUID shown in the placeholder.
bs: Ovo je DHCPv6 jedinstveni identifikator (DUID) koji firewall koristi kada zahtijeva IPv6 adresu. %1$sPo zadanim postavkama, firewall automatski stvara dinamički DUID koji nije spašen u firewall konfiguraciji. Da bi se pobrinuli da isti DUID je zadržan firewallom u svim trenucima, unesite DUID u ovo polje. Novi DUID će imati efekta tek nakon restarta ili nakon što se WAN interfejsi rekonfigurišu firewallom. %1$sAko firewall bude konfigurisan da koristi RAM disk za /var, najbolja praksa je spašavanje DUIDa ovdje jer inače će se DUID promijeniti pri svakom restartu. %1$s%1$sMožete koristiti Copy DUID dugme da kopirate sistemski detektovan DUID prikazan u odgovarajućem mjestu za čuvanje.

en: This is the Easy Rule status page, mainly used to display errors when adding rules.
bs: Ovo je easy pravilo statusna stranica, koristi se za prikaz grešaka prilikom dodavanja pravila.

en: This is the FQDN or IP address of the SMTP E-Mail server to which notifications will be sent.
bs: Ovo je FQDN ili IP adresa SMTP E-mail servera na koji će se slati notifikacije.

en: This is the IP address to send growl notifications to.
bs: Ovo je IP adresa kojoj će se slati Growl notifikacije.

en: This is the IPv4 address of the server to which DHCP requests are relayed.
bs: Ovo je IPv4 adresa servera na koji su DHCP zahtjevi relejisani.

en: This is the IPv4 virtual network used for private communications between this client and the server expressed using CIDR notation (e.g. 10.0.8.0/24). The second usable address in the network will be assigned to the client virtual interface. Leave blank if the server is capable of providing addresses to clients.
bs: Ovo je IPv4 virtualna mreža korištena za privatne komunikacije između ovog klijenta i servera izražena koristeći CIDR notaciju (npr. 10.0.8.0/24). Druga korisna adresa u mreži će biti dodijeljena klijentskom virtualnom interfejsu. Ostavite prazno ako je server u mogućnosti davanja adresa klijentima.

en: This is the IPv4 virtual network used for private communications between this server and client hosts expressed using CIDR notation (e.g. 10.0.8.0/24). The first usable address in the network will be assigned to the server virtual interface. The remaining usable addresses will be assigned to connecting clients.
bs: Ovo je IPv4 virtualna mreža korištena za privatne komunikacije između ovog servera i klijentskih hostova izražena koristeći CIDR notaciju (npr. 10.0.8.0/24). Prva adresa koja se mogne koristiti u mreži će biti dodijeljena serverskim virtualnim interfejsovima. Ostale korisne adrese će biti dodijeljenje spajanju klijenata.

en: This is the IPv6 address of the server to which DHCPv6 requests are relayed.
bs: Ovo je IPv6 adresa servera kojem DHCPv6 zahtjevi su relejisani.

en: This is the IPv6 virtual network used for private communications between this client and the server expressed using CIDR notation (e.g. fe80::/64). When set static using this field, the ::2 address in the network will be assigned to the client virtual interface. Leave blank if the server is capable of providing addresses to clients.
bs: Ovo je IPv6 virtualna mreža korištena za privatne komunikacije između ovog klijenta i servera izražena koristeći CIDR notaciju (npr. fe80::/64). Kada se koristi statički koristeći ovo polje, ::2 adresa u mreži će biti dodijeljena klijentskom virtualnom interfejsu. Ostavite prazno ako je server u mogućnosti davanja adresa klijentima.

en: This is the IPv6 virtual network used for private communications between this server and client hosts expressed using CIDR notation (e.g. fe80::/64). The ::1 address in the network will be assigned to the server virtual interface. The remaining addresses will be assigned to connecting clients.
bs: Ovo je IPv6 virtualna mreža korištena za privatne komunikacije između ovog servera i klijentskih hostova izražena koristeći CIDR notaciju (npr. fe80::/64). ::1 adresa koja se mogne koristiti u mreži će biti dodijeljena serverskim virtualnim interfejsovima. Ostale korisne adrese će biti dodijeljenje spajanju klijenata.

en: This is the e-mail address that will appear in the from field.
bs: Ovo je e-mail adresa koja će se pojaviti u polju od

en: This is the first level VLAN tag. On top of this are stacked the member VLANs defined below.
bs: Ovo je prvi nivo VLAN taga. Iznad ovoga su poredani članovi VLANa koji su definisani ispod.

en: This is the level of detail that will be displayed after hitting "Stop" when the packets have been captured.%sThis option does not affect the level of detail when downloading the packet capture.
bs: Ovo je nivo detalja koji će biti prikazan nakon klika "Stop" kada su paketi snimljeni. %s Ova opcija ne utiče na nivo detalja kada se preuzimaju snimljeni paketi.

en: This is the maximum lease time for clients that ask for a specific expiration time. The default is 86400 seconds.
bs: Ovo je maksimalno vrijeme posudbe za klijente koji traže specifično vrijeme isteka. Zadano je 86400 sekundi.

en: This is the number of log entries displayed in the GUI. It does not affect how many entries are contained in the log.
bs: Ovo je broj log unosa prikazan u GUIu. Ovo ne utiče na to koliko unosa se nalazi u logu.

en: This is the number of packets the packet capture will grab. Default value is 100.%sEnter 0 (zero) for no count limit.
bs: Ovo je broj paketa koje će snimanje paketa uhvatiti. Zadana vrijednost je 100.%s Unesi 0 (nula) za limit bez brojanja.

en: This is the only field required by for Custom Dynamic DNS, and is only used by Custom Entries.
bs: Ovo je jedino polje potrebno za posebni dinamički DNS i korišteno je samo za posebne unose.

en: This is the password of the master voucher nodes webConfigurator.
bs: Ovo je lozinka master vaučer čvorova webConfiguratora.

en: This is the port of the SMTP E-Mail server, typically 25, 587 (submission) or 465 (smtps).
bs: Ovo je port SMTP E-mail servera, tipično 25, 587 (slanje) ili 465 (smtps).

en: This is the port the servers are listening on. A port alias listed in Firewall -> Aliases may also be specified here.
bs: Ovo je port sa kojeg se sluša saobraćaj. Port alias koji je naveden u Firewall -> Aliasi može biti specificiran ovdje.

en: This is the username of the master voucher nodes webConfigurator.
bs: Ovo je korisničko ime master vaučer čvora webConfiguratora.

en: This is used for clients that do not ask for a specific expiration time. The default is 7200 seconds.
bs: Ovo je korišteno za klijente koji ne traže specifično vrijeme isteka. Zadano je 7200 sekundi.

en: This may be used to change the GPS Clock ID (default: GPS).
bs: Ovo može biti korišteno za promjenu GPS IDa sata (zadano: GPS).

en: This may be used to change the GPS Clock stratum (default: 0). This may be useful to, for some reason, have ntpd prefer a different clock.
bs: Ovo se može koristiti da se promijeni GPS sat stratuma (zadano 0). Ovo također može biti korisno da, iz nekog razloga ntpd se namjesti da preferira drugačiji sat.

en: This may be used to change the PPS Clock ID (default: PPS).
bs: Ovo može biti korišteno da promijeni PPS ID sata (zadano: PPS).

en: This may be used to change the PPS Clock stratum (default: 0). This may be useful to, for some reason, have ntpd prefer a different clock and just monitor this source.
bs: Ovo se može koristiti za promjenu PPS stratuma sata (zadano 0). Ovo može biti korisno ako želite da zbog nekog razloga ntpd preferira drugačiji sat te da samo prati ovaj izvor.

en: This may take several minutes!
bs: Ovo može potrajati nekoliko minuta!

en: This may take several minutes. Do not leave or refresh the page!
bs: Ovo može potrajati nekoliko minuta. Ne napuštajte ili osvježavajte stranicu!

en: This means that if block rules are used, it is important to pay attention to the rule order. Everything that isn't explicitly passed is blocked by default.
bs: Ovo znači da ako su if blok pravila korištena, bitno je da se obrati pažnja na redoslijed pravila. Sve što nije eksplicitno proslijeđeno je blokirano.

en: This monitor name has already been used.  Monitor names must be unique.
bs: Ovo ime za monitor je već iskorišteno. Imena monitora moraju biti unikatna.

en: This must match the setting on the DNS server.
bs: Ovo se mora poklapati sa postavkama na DNS serveru.

en: This name will be used in the form action for the HTTPS POST and should match the Common Name (CN) in the certificate (otherwise, the client browser will most likely display a security warning). Make sure captive portal clients can resolve this name in DNS and verify on the client that the IP resolves to the correct interface IP on pfSense.
bs: Ovo ime će biti korišteno u formi akcije za HTTPS POST i trebalo bi se poklapati sa zajedničkim imenom (CN) u certifikatu (inače, klijentski browser će vjerovatno prikazati sigurnosno upozorenje). Pobrinite se da zabranjeni portal može naći ovo ime u DNSu i verifikovati ga na klijentu da je IP adresa povezana sa tačnim interface IPom na pfSenseu.

en: This network conflicts with address configured on interface %s.
bs: Ova mreža se poklapa sa adresom konfigurisanom na interfejsu %s.

en: This option allows a predefined configuration to be selected. Default is the configuration of pfSense 2.1 and earlier (not recommended). Select Generic if the GPS is not listed.%1$sThe predefined configurations assume the GPS has already been set to NMEA mode.
bs: Ova opcija dozvoljava odabir predefinisane konfiguracije. Zadano je konfiguracija pfSensea 2.1 ili čak i ranije (što nije preporučeno). Odaberite Generic (generičke) ako GPS nije naveden. %1$sPredefinisane konfiguracije pretpostavlju da je GPS već postavljen u NMEA način.

en: This option causes the interface to operate in dial-on-demand mode, allowing it to be a virtual full time connection. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected.
bs: Ova opcija čini da interface radi na načinu dial-on-demand, te mu to dozvoljava da bude virtuelna full time konekcija. Interface je konfigurisan ali stvarna konekcija veze je odgođena dok kvalifikovan odlazeći promet ne bude detektovan.

en: This option changes the MAC address format used in the whole RADIUS system. Change this if the username format also needs to be changed for RADIUS MAC authentication. %1$sDefault: 00:11:22:33:44:55 %1$sSingle dash: 001122-334455 %1$sIETF: 00-11-22-33-44-55 %1$sCisco: 0011.2233.4455 %1$sUnformatted: 001122334455
bs: Ova opcija mijenja format MAC adrese u cijelom RADIUS sistemu. Promijenite ovo ako je format korisničkog imena u potrebi da bude zamijenjen za RADIUS MAC autentikaciju. %1$sZadano:  00:11:22:33:44:55 %1$sJedna crta: 01122-334455 %1$sIETF: 00-11-22-33-44-55 %1$sCisco: 0011.2233.4455 %1$sNeformatirano: 001122334455

en: This option is not compatible with failover and cannot be enabled when a Failover Peer IP address is configured.
bs: Ova opcija nije kompatibilna sa failoverom i ne može biti uključena kada Failover Peer IP adresa je konfigurisana.

en: This option is only meaningful if multi-link PPP is negotiated. It proscribes shorter multi-link fragment headers, saving two bytes on every frame. It is not necessary to disable this for connections that are not multi-link.
bs: Ova opcija ima smisla ako multi-link PPP se poziva. Propisuje kraće multi-link fragmentne headere, spašavajući 2 bajta na svakom frejmu. Nije nužno da isključite za konekcije koje nisu multi-link.

en: This option is only used when a non-default address is chosen as the source above. This option only expresses a preference; If an IP address of the selected type is not found on the chosen interface, the other type will be tried.
bs: Ova opcija se koristi samo kada ne-zadana adresa je izabrana kao izvor. Ova opcija samo izražava naklonjenost nekoj opciji; Ako IP adresa željenog tipa nije pronađena na željenom interfaceu, pokušati će se sa drugim tipom.

en: This option is rarely needed. Don't use this without thorough knowledge of the implications.
bs: Ova opcija je rijetko potrebna. Ne koristi ovo bez znanja implikacija.

en: This option is used if 'SSL Encrypted' or 'TCP - STARTTLS' options are chosen. It must match with the CA in the AD otherwise problems will arise.
bs: Ova opcija se koristi ako 'SSL Enkriptovan' ili 'TCP - STARTTLS' opcije su odabrane. Mora se poklapati sa CA u AD inače će se pojaviti problemi.

en: This option may be useful when a client can dual boot using different client identifiers but the same hardware (MAC) address.  Note that the resulting server behavior violates the official DHCP specification.
bs: Ova opcija može biti korisna kada klijent može dual bootati koristeći različite klijent identifikatore ali isti hardver (MAC) adresu. Upamtite da rezultujuće ponašanje servera krši zvaničnu DHCP specifikaciju.

en: This option persists even if DHCP server is disabled. Only the machines listed below will be able to communicate with the firewall on this interface.
bs: Ova opcija ostaje čak i ako je DHCP server isključen. Samo uređaji/mašine navedene ispod će biti u mogućnosti komunikacije sa firewallom na ovom interfaceu.

en: This option requires that the "Enable WPA box" is checked
bs: Ova opcija zahtijeva da je "Uključi WPA kutiju" označena

en: This option resets all states when a WAN IP Address changes instead of only states associated with the previous IP Address.
bs: Ova opcija resetuje sva stanja kad WAN IP Adresa se promjeni umjesto samo stanja asociranih sa prethodnom IP Adresom.

en: This option still allows the server to set the TCP/IP properties of the client's TUN/TAP interface.
bs: Ova opcija i dalje dozvoljava serveru da postavi TCP/IP svojstva klijentskog TUN/TAP interfejsa.

en: This option will allow the logging daemon to bind to a single IP address, rather than all IP addresses.
bs: Ova opcija će dozvoliti logovanje daemona za dodjelu jedne IP adrese, radije nego svim IP adresama.

en: This option will suppress ARP log messages when multiple interfaces reside on the same broadcast domain.
bs: Ova opcija će zataškati ARP log poruke kada se više interfaceova nalazi na istom emitovanom domenu.

en: This page is currently being managed by a remote machine.
bs: Ovom stranicom se upravlja preko udaljene mašine.

en: This page is meant to be called from the block/pass buttons on the Firewall Logs page
bs: Ova stranica je napravljena za pozivanje iz block/pass dugmadi na stranici Firewall logova.

en: This page is used to override the usual lookup process for a specific host. A host is defined by its name and parent domain (e.g., 'somesite.google.com' is entered as host='somesite' and parent domain='google.com'). Any attempt to lookup that host will automatically return the given IP address, and any usual external lookup server for the domain will not be queried. Both the name and parent domain can contain 'non-standard', 'invalid' and 'local' domains such as 'test', 'mycompany.localdomain', or '1.168.192.in-addr.arpa', as well as usual publicly resolvable names such as 'www' or 'google.co.uk'.
bs: Ova stranica se koristi za overrideanje standardnog lookup procesa za specifični host. Host je definisan svojim imenom i roditeljskom domenom (npr 'somesite.google.com' i uneseno je kao host='somesite' i parent domena='google.com'). Bilo koji pokušaj za traženje hosta će automatski vratiti traženu IP adresu i bilo koji standardni eksterni lookup server za domenu neće biti poslan kao upit. I ime i parent domena mogu sadržavati nestandardne, pogrešne i lokalne domene kao 'test', 'mycompany.localdomain' ili '1.168.192.in-addr.arpa' kao i javna imena kao 'www' ili 'google.co.uk'.

en: This page is used to specify domains for which the resolver's standard DNS lookup process will be overridden, and the resolver will query a different (non-standard) lookup server instead. It is possible to enter 'non-standard', 'invalid' and 'local' domains such as 'test', 'mycompany.localdomain', or '1.168.192.in-addr.arpa', as well as usual publicly resolvable domains such as 'org', 'info', or 'google.co.uk'.  The IP address entered will be treated as the IP address of an authoritative lookup server for the domain (including all of its subdomains), and other lookup servers will not be queried.
bs: Ova stranica se koristi za specificiranje domena za koje je resolverov standardni DNS proces traženja overridean, i resolver će poslati drugačiji upit lookup serveru. Moguće je unijeti 'non-standard', 'invalid' i 'local' domene kao 'test', 'mycompany.localdomain' ili '1.168.192.in-addr.arpa' kao i obične javno dostupne domene kao 'org', 'info' ili 'google.co.uk'. IP adresa unesena ovdje će biti tretirana kao IP adresa autoritativnog lookup servera za domenu (uključujući sve njegove poddomene) i ostali lookup serveri neće biti poslani na upit.

en: This page performs a simple TCP connection test to determine if a host is up and accepting connections on a given port.
bs: Ova stranica vrši jednostavan test TCP konekcije za provjeru da li je host pokrenut i prihvatanje konekcija na datom portu.

en: This page shows all listening sockets by default, and shows both listening and outbound connection sockets when %1$sShow all socket connections%2$s is clicked.
bs: Ova stranica prikazuje sve sockete koje pratite zadano i prikazuje i listening i outbound sockete kada %1$sPrikaži sve socket konekcije%2$s je kliknuto.

en: This page will automatically refresh every 3 seconds until the filter is done reloading.
bs: Ova stranica će se automatski osvježavati svake 3 sekunde dok se filter ne učita ponovo.

en: This parent interface and VLAN already created.
bs: Ovaj parent interface i VLAN su već kreirani.

en: This pipe/queue is referenced in filter rules, please remove references from there before deleting.
bs: Ovaj pipe/red je referenciran u filter pravilima, molim uklonite reference prije brisanja.

en: This point-to-point link cannot be deleted because it is still being used as an interface.
bs: Ovaj point-to-point link ne može biti obrisan jer se još uvijek koristi kao interface.

en: This pool name has already been used.  Pool names must be unique.
bs: Ovo pool ime je već iskorišteno. Imena poolova moraju biti jedinstvena.

en: This prevents the rule on Master from automatically syncing to other CARP members. This does NOT prevent the rule from being overwritten on Slave.
bs: Ovo sprječava pravilo na Masteru od automatske sinhronizacije za ostale CARP članove. Ovo NE preventira pravilo da se piše preko njega na Slaveu.

en: This private does not appear to be valid.
bs: Ovaj privatni dio nije validan.

en: This product includes %1$s, freely available from (%2$s)
bs: Ovaj projekt uključuje %1$s, koji je besplatno dostupan na (%2$s)

en: This product includes software developed by Edwin Groothuis.
bs: Ovaj projekt uključuje softver razvijen od strane Edwina Groothuisa

en: This protocol is intended to do nothing: it disables any traffic without disabling the lagg interface itself.
bs: Ovaj protokol je namijenjen da ne radi ništa; isključuje bilo kakav promet bez isključivanja lagg interfacea.

en: This rule is being ignored
bs: Ovo pravilo će se ignorisati

en: This rule is not currently active because its period has expired
bs: Ovo pravilo nije trenutno aktivno jer je njegov period istekao

en: This schedule is in use so the name may not be modified!
bs: Raspored se koristi tako da ime ne može biti promijenjeno!

en: This service can be used to wake up (power on) computers by sending special "Magic Packets".
bs: Ovaj servis može biti uključen za paljenje kompjutera slanjem magičnih paketa.

en: This signing request does not appear to be valid.
bs: Ova metoda verifikacije nije validna.

en: This status page includes the following information
bs: Ova statusna stranica uključuje sljedeće informacije

en: This subnet must be routed to the firewall or each address in the subnet must be defined in one or more %1$sVirtual IP%2$s addresses.
bs: Ovaj subnet mora biti spojen na firewall ili svaka adresa u subnetu mora biti definirana u jednoj ili više %1$s virtual IP%2$s adresa.

en: This system has no interfaces configured with a static IPv4 address.
bs: Sistem nema dovoljno konfigurisanih interfaceova sa statičkom IPv4 adresom.

en: This system is configured to use the DNS Resolver as its DNS server, so Localhost or All must be selected in Network Interfaces.
bs: Sistem je konfigurisan da koristi DNS resolver kao njegov DNS server, tako da Localhost ili Svi moraju biti selektovani u Mrežnim Interfejsima

en: This test does not function for UDP since there is no way to reliably determine if a UDP port accepts connections in this manner.
bs: Ovaj test ne funkcioniše za UDP jer ne postoji način da se provjereno utvrdi da li UDP port prihvata konekcije u ovom maniru.

en: This timeout is used for when the server is very busy. This protects against denial of service by slow queries or high query rates. The default value is 200 milliseconds.
bs: Ovaj timeout je korišten kada je server veoma zauzet. Ovo štiti od ukidanja servisa zbog sporih upita ili visoke frekvencije upita. Zadana vrijednost je 200 milisekundi.

en: This track6 prefix ID is already being used in %s.
bs: Ovaj track6 prefiksni ID se već koristi u %s.

en: This user can view and clear system notices.
bs: Ovaj korisnik može vidjeti i očistiti sistemske notifikacije

en: This user can view system notices.
bs: Ovaj korisnik može vidjeti sistemske notifikacije.

en: This user cannot login
bs: Ovaj korisnik se ne može prijaviti

en: This user is a member of groups
bs: Ovaj korisnik je član grupa

en: This user is associated with the UNIX root user (this privilege should only be associated with one single user).
bs: Ovaj korisnik je UNIX root korisnik (ovu privilegiju je moguće dodijeliti samo jednom korisniku).

en: This value controls how long, in seconds, that the RADIUS server may take to respond to an authentication request. If left blank, the default value is 5 seconds. NOTE: If using an interactive two-factor authentication system, increase this timeout to account for how long it will take the user to receive and enter a token.
bs: Ova vrijednost kontroliše koliko dugo, u sekundama će RADIUS serveru trebati da odgovori na autentikacijski zahtjev. Ako je ostavljeno prazno, zadana vrijednost je 5 sekundi. NAPOMENA: Ako koristite interaktivni faktor-dva autentikacijski sistem, povećajte ovaj timeout za account koliko će trebati korisniku da primi i unese token.

en: This value is either the Source or Destination IP address, subnet in CIDR notation, or MAC address.%1$sMatching can be negated by preceding the value with "!". Multiple IP addresses or CIDR subnets may be specified. Comma (",") separated values perform a boolean "AND". Separating with a pipe ("|") performs a boolean "OR".%1$sMAC addresses must be entered in colon-separated format, such as xx:xx:xx:xx:xx:xx or a partial address consisting of one (xx), two (xx:xx), or four (xx:xx:xx:xx) segments.%1$sIf this field is left blank, all packets on the specified interface will be captured.
bs: Ova vrijednost je ili izvorna ili destinacijska IP adresa, subnet u CIDR notaciji ili MAC adresa. %1$sSpajanje može biti negirano sa predvrijednošću "!". Više IP adresa ili CIDR subneta može biti specificirano. Zarez(",") odvojene vrijedosti vrše booleovo "I". Odvajanje uspravnom crtom ("|") vrši booleovo "ILI". %1$s MAC adrese moraju biti unesene u razdvojenom formatu poput xx:xx:xx:xx:xx:xx ili parcijalne adrese koje se sadrže od jednog (xx), dva (xx:xx) ili četiri (xx:xx:xx:xx) segmenta. %1$sAko je ovo polje ostavljeno prazno, svi paketi na specificiranom interfaceu će biti snimljeni.

en: This virtual server name has already been used.	Virtual server names must be unique.
bs: Ovo ime virtualnog servera se već koristi. Imena moraju biti jedinstvena.

en: This will allow use of a gateway outside of this interface's subnet. This is usually indicative of a configuration error, but is required for some scenarios.
bs: Ovo će dozvoliti korištenje gejtveja van subneta ovog interfejsa. Ovo je često pokazatelj konfiguracijske greške, ali je potrebno za neke scenarije.

en: This will consider this gateway as always being up.
bs: Ovo će smatrati kao da je gejtvej stalno pokrenut.

en: This will force this gateway to be considered down.
bs: Ovo će forsirati gejtvej tako da se on smatra ugašenim.

en: This will select the above gateway as the default gateway.
bs: Ovo će selektovati gejtvej iznad kao zadani

en: This wireless clone cannot be deleted because it is assigned as an interface.
bs: Ovaj wireless klon ne može biti obrisan jer je dodijeljen kao interface.

en: This wireless clone cannot be modified because it is still assigned as an interface.
bs: Wireless klon ne može biti modifikovan jer je još uvijek dodijeljen kao interface.

en: Three (Client+2xIntermediate+Server)
bs: Tri (Klijent + 2xSrednja + Server)

en: Threshold
bs: Odstupanje

en: Thresholds in
bs: Prag in

en: Thu
bs: Čet

en: Thur
bs: Čet

en: Tickets are generated with the specified character set. It should contain printable characters (numbers, lower case and upper case letters) that are hard to confuse with others. Avoid e.g. 0/O and l/1.
bs: tiketi su generisani sa specificiranim skupom znakova. Trebali bi sadržavati printabilne znakove (brojeve, mala i velika slova) koja se teško miješaju. Izbjegavajte 0/O i l/1.

en: Tier
bs: Red

en: Tier %s
bs: Red %s

en: Time
bs: Vrijeme

en: Time Format Change
bs: Promjena formata vremena

en: Time Period
bs: Vremenski period

en: Time Servers
bs: Vrijeme servera

en: Time between GMK rekey events, specified in seconds. Allowed values are 1-9999. Must be longer than Group Key Rotation time
bs: Vrijeme između GMK ključanja eventova, specificirano u sekundama. Dozvoljene vrijednosti su 1-9999. Mora biti duže od vremena rotacije grupnog ključa

en: Time between group rekey events, specified in seconds. Allowed values are 1-9999. Must be shorter than Master Key Regeneration time
bs: Vrijeme između grupnog ključanja eventova, specificirano u sekundama. Dozvoljene vrijednosti su 1-9999. Mora biti kraće od vremena Regeneracije master ključa

en: Time exceeded
bs: vrijeme prekoračeno

en: Time format change
bs: Promjena formata vremena

en: Time in minutes to expire idle management sessions. The default is 4 hours (240 minutes). Enter 0 to never expire sessions. NOTE: This is a security risk!
bs: Vrijeme u minutama do isteka sesija upravljanja. Zadano je 4 sata (240 minuta). Unesite 0 da sesije nikad ne ističu. NAPOMENA: Ovo je sigurnosni rizik!

en: Time in seconds to cache authentication results. The default is 30 seconds, maximum 3600 (one hour). Shorter times result in more frequent queries to authentication servers.
bs: Vrijeme u sekundama za keširanje autentikacijskih rezultata. Zadano je 30 sekundi, maksimalno 3600 (jedan sat). Kraća vremena rezultuju u češćim upitima ka autentikacijskim serverima.

en: Time interval in milliseconds before packets are treated as lost. Default is %d.
bs: Vremenski interval u milisekundama prije no paketi budu tretirani kao izgubljeni. Zadano je %d.

en: Time interval in milliseconds between checking for an alert condition. Default is %d.
bs: Vremenski interval u milisekundama između provjere stanja upozorenja. Zadano je %d.

en: Time period in milliseconds over which results are averaged. Default is %d.
bs: Vremenski period u milisekundama u kojem će se tražiti prosjek rezultata. Zadano je %d.

en: Time range description
bs: Opis vremenskog intervala

en: Time to Live, in seconds, for entries in the infrastructure host cache. The infrastructure host cache contains round trip timing, lameness, and EDNS support information for DNS servers. The default value is 15 minutes.
bs: Vrijeme za život u sekundama, za unose u infrastrukturi hostnog keša. Infrastruktura host keša sadrži round trip tajming, lameness i EDNS podršku za DNS servere. Zadana vrijednost je 15 minuta.

en: Time to wait for SIM to discover network after PIN is sent to SIM (seconds).
bs: Vrijeme čekanja da SIM otkrije mrežu nakon što je PIN poslan SIMU (sekunde).

en: Timeout for LDAP operations (seconds)
bs: Timeout za LDAP operacije (u sekundama)

en: Timeout must be a numeric value
bs: Timeout mora biti numerička vrijednost

en: Timeout needs to be an integer.
bs: Timeout mora biti cijeli broj.

en: Timeout waiting for IPv6 address in tentative state.  dpinger will not run.
bs: Vrijeme je isteklo čekajući na IPv6 adresu u privremenom stanju.  dpinger neće biti pokrenut.

en: Timeouts for states can be scaled adaptively as the number of state table entries grows. Leave blank to use default values, set to 0 to disable Adaptive Timeouts.
bs: Timeouti za stanja mogu biti skalirani adaptivno kako broj stanja u tablici raste. Ostavite prazno da koristite zadane vrijednosti, postavite na 0 da isključite adaptivne isteke.

en: Timeservers
bs: Vremenski serveri

en: Timestamp
bs: vremenska oznaka

en: Timestamp reply
bs: odgovor na vremensku oznaku

en: Timings
bs: Tajminzi

en: To
bs: ka

en: To assign the user a specific IP address, enter it here.
bs: Za dodjeljivanje specifične IP adrese, unesite je ovdje.

en: To bypass the wizard, click on the %s logo on the initial page.
bs: Da bi izbjegli čarobnjaka, kliknite na %s logo na početnoj stranici.

en: To change the users password, enter it here.
bs: Za mijenjanje lozinke korisnika, unesite je ovdje.

en: To have the DHCP client reject offers from specific DHCP servers, enter their IP addresses here (separate multiple entries with a comma). This is useful for rejecting leases from cable modems that offer private IP addresses when they lose upstream sync.
bs: Da imate DHCP klijent ponudu od specifičnog DHCP servera, unesite njihovu IP adresu ovdje (odvojite više unosa zarezom). Ovoje korisno za odbijanje posudbni od kablovskih modema koji nude privatne IP adrese kada izgube upstream sinhronizaciju.

en: To port
bs: Na port

en: To repair a failed mirror, first perform a 'Forget' command on the mirror, followed by an 'insert' action on the new consumer.
bs: Za popravku neuspjelog mirrora, prvo odradi 'Forget' komandu na mirror, praćenu sa 'insert' radnjom na novog korisnika.

en: To view the differences between an older configuration and a newer configuration, select the older configuration using the left column of radio options and select the newer configuration in the right column, then press the "Diff" button.
bs: Da vidite razlike između stare konfiguracije i nove konfiguracije, odaberite staru konfiguraciju koristeći lijevu kolonu radio opcija i izberite novu konfiguraciju u desnoj koloni pa zatim pritisnite "Diff" dugme.

en: Too Soon: Not Enough Time Has Elapsed Since Last Update
bs: Prerano: Nije prošlo dovoljno vremena od posljednjeg ažuriranja.

en: Too many members in group %s, gateway group truncated in ruleset.
bs: Previše članova u grupi %s, gateway smanjen u skupu pravila.

en: Too many updates sent.
bs: Previše ažuriranja poslano.

en: Top Navigation
bs: Nazad na vrh

en: Top of page
bs: Vrh stranice

en: Topology
bs: Topologija

en: Total
bs: Ukupno

en: Total Sessions: %s
bs: Ukupne sesije: %s

en: Total interrupts
bs: Ukupni prekidi

en: Total per IP
bs: Ukupno po IPu

en: Traceroute
bs: Praćenje rute

en: Track IPv6 Interface
bs: Prati IPv6 interface

en: Track Interface
bs: Prati interface

en: Tracker
bs: Traker

en: Traffic Graph
bs: Grafike

en: Traffic Graphs
bs: Grafovi prometa

en: Traffic Shaper
bs: Upravljanje prometom

en: Traffic Shaper Limiters configuration
bs: Limiteri oblikovatelja prometa konfiguracija

en: Traffic Shaper Wizard
bs: Upravitelj prometom wizard

en: Traffic Shaper Wizards
bs: Čarobnjak za upravljanje prometa

en: Traffic Shaper configuration
bs: Oblikovatelj prometa konfiguracija

en: Traffic matching this rule is currently being allowed
bs: Promet koji se poklapa s ovim pravilom je dozvoljen

en: Traffic matching this rule is currently being denied
bs: Promet koji se poklapa sa ovim pravilom je trenutno odbijen

en: Traffic shaping is not configured.
bs: Upravljanje prometom nije konfigurisano

en: Translation
bs: Prevod

en: Transmit Hold Count for STP needs to be an integer between 1 and 10.
bs: Brojač držanja prenosa za STP mora biti cijeli broj između 1 i 10.

en: Transmit antenna
bs: Prenos antene

en: Transparent
bs: Transparentno

en: Trap Server Port
bs: Trap server port

en: Trap Service
bs: Trap servis

en: Trap server port
bs: Port trap servera

en: Tried to block but had no host IP or interface
bs: Pokušaj blokiranja ali host IP ili interface ne postoje

en: Tried to block invalid IP:
bs: Pokušaj blokiranja pogrešnog IPa:

en: Tried to pass invalid destination IP:
bs: Pokušaj prosljeđivanja pogrešne destinacije IPa:

en: Tried to pass invalid destination port:
bs: Pokušaj prosljeđivanja pogrešnog destinacijskog porta:

en: Tried to pass invalid source IP:
bs: Pokušaj proslijeđivanja pogrešnog izvornog IPa:

en: Tried to unblock but had no host IP or interface
bs: Pokušaj deblokiranja ali IP ili interface ne postoje

en: Tried to unblock invalid IP:
bs: Pokušaj deblokiranja pogrešnog IPa:

en: Tries to avoid dropping any legitimate idle connections at the expense of increased memory usage and CPU utilization
bs: Pokušava baciti bilo kakvu legitimnu odsutnu konekciju za cijenu povećane potrošnje memorije i korištenja CPU

en: Try reinstalling the package.
bs: Pokušajte ponovo instalirati paket.

en: Tue
bs: Uto

en: Tues
bs: Uto

en: Tunable Name
bs: Ime opcije štimanja

en: Tunnel IPv4
bs: Tunel IPv4

en: Tunnel IPv6
bs: Tunel IPv6

en: Tunnel Network
bs: Tunel mreža

en: Tunnel Settings
bs: Tunnel postavke

en: Tunnel endpoints
bs: Tunnel krajevi

en: Tunnel to &hellip;
bs: Tunnel ka &hellip;

en: Tunnels
bs: Tuneli

en: Two (Client+Intermediate+Server)
bs: Dva (Klijent + Srednji + Server)

en: Type
bs: Tip

en: Type Transparent
bs: Tipski transparentno

en: Type-of-Service
bs: Tip usluge

en: Typically *99# for GSM networks and #777 for CDMA networks
bs: Tipično *99# za GSM mreže i #777 za CDMA mreže

en: Typically *99# for GSM networks and #777 for CDMA networks.
bs: Tipično *99# za GSM mreže i #777 za CDMA mreže

en: UDP Fast I/O
bs: UDP brzi U/I

en: UEFI 32 bit file name
bs: UEFI 32 bit ime fajla

en: UEFI 64 bit file name
bs: UEFI 64 bit ime fajla

en: UNKNOWN ERROR
bs: NEPOZNATA GREŠKA

en: UPnP &amp; NAT-PMP Rules
bs: UPnP &amp; NAT-PMP Pravila

en: UPnP Service
bs: UPnP Servis

en: UPnP is currently disabled. It can be enabled here: %1$s%2$s%3$s.
bs: UPnP je trenutno isključen. Možete ga uključiti ovdje: %1$s%2$s%3$s

en: URL '%s' is not valid.
bs: URL '%s' nije validan.

en: URL (IPs)
bs: URL (IPovi)

en: URL (Ports)
bs: URL (Portovi)

en: URL Table (IPs)
bs: URL Tablice (IPovi)

en: URL Table (Ports)
bs: URL Tablice (Portovi)

en: URLs
bs: URLovi

en: UTF8 Encode
bs: UTF8 Enkodiranje

en: UTF8 encode LDAP parameters before sending them to the server.
bs: UTF8 enkodiranje LDAP parametara prije njihovog slanja ka serveru.

en: Unable to change mode to %s. The maximum number of wireless clones supported in this mode may have been reached.
bs: Nije moguće promijeniti mod na %s. Maksimalan broj wireless klonova koji je podržan u ovom modu je možda dostignut.

en: Unable to contact daemon
bs: Nije moguće spojiti se sa daemonom.

en: Unable to fetch usable data from URL %s
bs: Nemoguće doći do korisnih podataka sa URLa %s

en: Unable to find IPsec daemon leases file. Could not display mobile user stats!
bs: Nije moguće pronaći IPsec daemon fajl posudbi. Nije moguće prikazati mobilne korisničke postavke!

en: Unable to load package configuration. Installation aborted.
bs: Nije moguće učitati paketnu konfiguraciju. Prekid instalacije.

en: Unable to open %1$s/config.xml for writing in write_config()%2$s
bs: Nemoguće otvoriti %1$s/config.xml za pisanje u write_config()%2$s

en: Unable to retrieve package information.
bs: Nemoguće preuzeti paketne informacije.

en: Unable to retrieve status
bs: Nemoguće uzeti status

en: Unable to retrieve system versions.
bs: Nemoguće preuzeti sistemske verzije

en: Unable to revert to the selected configuration.
bs: Nije moguće vratiti selektovanu konfiguraciju.

en: Unable to write config.xml (Access Denied?).
bs: Nemoguće napisati config.xml (Zabranjen pristup?)

en: Unblocked host %s via easy rule
bs: Deblokiran host %s pomoću lakog pravila

en: Unbound start waiting on dhcp6c.
bs: Nepovezani start čeka na dhcp6c.

en: Unencrypted payloads in IKEv1 Main Mode
bs: Neenkriptovani sadržaju IKEv1 glavnom načinu rada

en: Unexpected return value: %s
bs: Neočekivana povratna vrijednost: %s

en: Unformatted
bs: Neformatirano

en: Unfortunately a Programming Bug has been detected
bs: Nažalost pojavio se bug u programiranju.

en: Unique Identifier
bs: Jedinstveni identifikator

en: Unit Size
bs: Veličina jedinice

en: Unknown
bs: Nepoznato

en: Unknown %s configured as ppp interface.
bs: Nepoznat %s konfigurisan kao ppp interface.

en: Unknown - relayd not running?
bs: Nepoznato - relayd nije pokrenut?

en: Unknown Power
bs: Nepoznat izvor snage

en: Unknown Response
bs: Nepoznat odgovor

en: Unknown Response.
bs: Nepoznat odgovor.

en: Unknown Response:
bs: Nepoznat odgovor:

en: Unknown Service
bs: Nepoznat servis

en: Unknown block error.
bs: Nepoznata greška blokiranja

en: Unknown pass error.
bs: Nepoznata pass greška.

en: Unknown system
bs: Nepoznat sistem

en: Unknown username - User does not exist.
bs: Nepoznato korisničko ime - korisnik ne postoji

en: Unless required by applicable law or agreed to in writing, software%1$sdistributed under the License is distributed on an \"AS IS\" BASIS,%1$sWITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.%1$sSee the License for the specific language governing permissions and%1$slimitations under the License.
bs: Osim ako je potrebno po pravu ili prihvaćeno za pisanje, softver %1$s distribuisan pod licencom je distribuisan na \ "AS IS\" osnovi, %1$sBEZ GARANCIJE ILI USLOVA IKAKVE POTREBE, implicirano ili izraženo.%1$s pogledaj licencu za specifične jezike i njihove uslove te%1$s limitacije pored Licence.

en: Unlocked or correct MCC/MNC Service
bs: Otključana ili tačna MCC/MNC usluga

en: Unmanaged
bs: Nezavisno

en: Unmanaged - RA Flags [none], Prefix Flags [onlink, auto, router]
bs: Slobodni - RA oznake [none], Prefiksne oznake [onlink, auto, router]

en: Unreach/Pending
bs: Nedostupan/Čeka se

en: Unresolvable destination alias '%1$s' for rule '%2$s'
bs: Nerješiv destinacijski alias '%1$s' za pravilo '%2$s'

en: Unresolvable destination port alias '%1$s' for rule '%2$s'
bs: Nerješiv destinacijski port alias '%1$s' za pravilo '%2$s'

en: Unresolvable source alias '%1$s' for rule '%2$s'
bs: Nerješiv izvorni alias '%1$s' za pravilo '%2$s'

en: Unresolvable source port alias '%1$s' for rule '%2$s'
bs: Nerješiv izvorni port alias '%1$s' za pravilo '%2$s'

en: Unset RRD data from configuration after restoring %s configuration area
bs: Ukloni RRD podatke iz konfiguracije nakon vraćanja %s konfiguracijske zone

en: Unset RRD data from configuration after restoring full configuration
bs: Ponovo postavi RRD podatke iz konfiguracije nakon vraćanja cijele konfiguracije

en: Unsigned 16-bit integer
bs: Nenegativan 16-bitni cijeli broj

en: Unsigned 16-bit integer type must be a number in the range 0 to 65535.
bs: Nenegativan 16-bitni cijelobrojni tip mora biti u intervalu 0 do 65535.

en: Unsigned 32-bit integer
bs: Nenegativan 32-bitni cijeli broj

en: Unsigned 32-bit integer type must be a number in the range 0 to 4294967295.
bs: Nenegativan 32-bitni cijelobrojni tip mora biti u intervalu 0 do 4294967295.

en: Unsigned 8-bit integer
bs: Nenegativan 8-bitni cijeli broj

en: Unsigned 8-bit integer type must be a number in the range 0 to 255.
bs: Nenegativan 8-bitni cijelobrojni tip mora biti u intervalu 0 do 255.

en: Unwanted Reply Threshold
bs: Neželjeni prag odgovora

en: Up to 20 hosts my be updated. numhost is returned if attempting to update more than 20 or update a round-robin.
bs: Do 20 hostova može biti ažurirano. numhost je vraćen ako pokušate ažurirati više od 20 ili ažurirati round-robin.

en: Up to date.
bs: Ažurirano.

en: Update
bs: Ažuriraj

en: Update CSR
bs: Ažuriraj CSR

en: Update Failed!
bs: Ažuriranje nije uspjelo!

en: Update Frequency
bs: Frekvencija ažuriranja

en: Update Password
bs: Ažuriraj lozinku

en: Update Settings
bs: Postavke ažuriranja

en: Update Too Soon - Attempted to update too quickly since last change.
bs: Ažuriranje prerano - Pokušaj ažuriranja prebrzo nakon posljednje promjene.

en: Update URL
bs: URL ažuriranja

en: Update alias
bs: Ažuriraj alias

en: Update client support not available for supplied hostname or group.
bs: Ažuriranje klijent podrške nije dostupno za ovo host ime ili grupu.

en: Update interval
bs: Interval ažuriranja

en: Update package %s
bs: Ažuriraj paket %s

en: Updated
bs: Ažurirano

en: Updated NTP GPS Settings
bs: Ažurirane NTP GPS postavke

en: Updated OpenVPN client specific override %1$s %2$s
bs: Ažuriran OpenVPN specifični klijent override %1$s %2$s

en: Updated OpenVPN client to server %1$s:%2$s %3$s
bs: Ažuriran OpenVPN klijent na server %1$s:%2$s %3$s

en: Updated OpenVPN server on %1$s:%2$s %3$s
bs: Ažuriran OpenVPN server na %1$s:%2$s %3$s

en: Updated bogon update frequency to 3am
bs: Ažuriran bogon frekvencija ažuriranja na 03:00

en: Updated gateways widget settings via dashboard.
bs: Ažurirani gejtvej widget postavke preko kontrolne ploče.

en: Updated load balancer pools via status screen.
bs: Ažurirano balansiranje poolova preko statusnog ekrana.

en: Updated traffic graphs widget settings via dashboard.
bs: Ažurirani grafovi prometa te widget postavke preko kontrolne ploče.

en: Updates
bs: Ažuriranja

en: Updating System
bs: Ažuriranje sistema

en: Updating gateway group gateway for %1$s - new gateway is %2$s
bs: Ažuriram gateway grupu za %1$s - novi gateway je %2$s

en: Updating too frequently, considered abuse.
bs: Prečesto ažuriranje, smatra se zloupotrebljavanjem.

en: Updating too frequently.
bs: Prečesto ažuriranje.

en: Updating...
bs: Ažuriranje...

en: Upgrade available to %s
bs: Ažuriranje dostupno na %s

en: Upgraded Dyndns %s
bs: Nadograđen Dyndns %s

en: Upgraded config version level from %1$s to %2$s
bs: Nadograđena verzija konfiguracije sa %1$s na %2$s

en: Upgraded settings from openttpd
bs: Nadograđene postavke sa openttpd

en: Upgraded static route for %s
bs: Nadograđena statička ruta za %s

en: Upgrading m0n0wall configuration to pfSense...
bs: Nadogradnja m0n0wall konfiguracije na pfSense...

en: Upgrading m0n0wall configuration to pfsense.
bs: Nadograđujem m0n0wall konfiguraciju za pfsense.

en: Upload File
bs: Upload fajla

en: Upload a New File
bs: Uploadaj novi fajl

en: Upload an HTML/PHP file for the portal page here (leave blank to keep the current one). Make sure to include a form (POST to "$PORTAL_ACTION$") with a submit button (name="accept") and a hidden field with name="redirurl" and value="$PORTAL_REDIRURL$". Include the "auth_user" and "auth_pass" and/or "auth_voucher" input fields if authentication is enabled, otherwise it will always fail.%1$sExample code for the form: %1$s&lt;form method=&quot;post&quot; action=&quot;$PORTAL_ACTION$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_user&quot; type=&quot;text&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_pass&quot; type=&quot;password&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_voucher&quot; type=&quot;text&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;redirurl&quot; type=&quot;hidden&quot; value=&quot;$PORTAL_REDIRURL$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;zone&quot; type=&quot;hidden&quot; value=&quot;$PORTAL_ZONE$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;accept&quot; type=&quot;submit&quot; value=&quot;Continue&quot;&gt;%1$s&lt;/form&gt;
bs: Uploadaj HTML/PHP fajl za portalnu stranicu ovdje (ostavite prazno da zadržite trenutnu). Pobrinite se da uključite formu (POST ka "$PORTAL_ACTION$") sa submit dugmetom (name="accept") i skrivenim poljem sa name="redirurl" i value="$PORTAL_REDIRURL$". Uključite "auth_user" i "auth_pass" i/ili "auth_voucher" input polja ako je autentikacija uključena, inače će uvijek pasti .%1$sPrimjer koda za formu: %1$s&lt;form method=&quot;post&quot; action=&quot;$PORTAL_ACTION$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_user&quot; type=&quot;text&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_pass&quot; type=&quot;password&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;auth_voucher&quot; type=&quot;text&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;redirurl&quot; type=&quot;hidden&quot; value=&quot;$PORTAL_REDIRURL$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;zone&quot; type=&quot;hidden&quot; value=&quot;$PORTAL_ZONE$&quot;&gt;%1$s&nbsp;&nbsp;&nbsp;&lt;input name=&quot;accept&quot; type=&quot;submit&quot; value=&quot;Continue&quot;&gt;%1$s&lt;/form&gt;

en: Upload speed must be between 1 and 999999
bs: Upload brzina mora biti između 1 i 999999

en: Upload speed needs to be an integer
bs: Brzina uploada mora biti cijeli broj

en: Uploaded file to %s.
bs: Fajl uploadan na %s.

en: Uploading...
bs: Uploadanje...

en: Uploads crash reports to pfSense and or deletes crash reports.
bs: Slanje izvještaja krahiranja pfSenseu i/ili brisanje izvještaja krahiranja

en: Upper Limit
bs: gornji limit

en: Upstream Interface
bs: Upstream interface

en: Uptime
bs: Vrijeme rada

en: Uptime logging
bs: Uptime logiranje

en: Uptime: %s
bs: Pokrenuto: %s

en: Usage
bs: Korištenje

en: Use "From" to always allow a Hostname through the captive portal (without authentication). Use "To" to allow access from all clients (even non-authenticated ones) behind the portal to this Hostname.
bs: Koristi "od" da uvijek dozvolite hostnameu kroz zabranjeni portal (bez autentikacije). Koristite "do" da dozvolite pristup svim klijentima (čak i onim koji nisu autentikovani) iza portala za ovaj hostname.

en: Use "From" to always allow access to an address through the captive portal (without authentication). Use "To" to allow access from all clients (even non-authenticated ones) behind the portal to this IP.
bs: Koristite "Od" da uvijek dozvolite pristup kroz zabranjeni portal (bez autentikacije). Koristite "Ka" da dozvolite pristup svim klijentima (čak i onim koji nisu autentikovani) iza portala za ovaj IP.

en: Use 0x-20 encoded random bits in the DNS query to foil spoofing attempts.
bs: Koristi 0x-20 enkodiranje nasumičnih bitova u DNS upitima da bi se spriječio pokušaj podvala.

en: Use 3DES for best compatibility or for a hardware crypto accelerator card. Blowfish is usually the fastest in software encryption.
bs: Koristi 3DES za najbolju kompatibilnost ili hardversku kriptografsku karticu. Blowfish je obično najbrži u softverskoj enkripciji.

en: Use Default
bs: Koristi zadano

en: Use ICMP
bs: Koristi ICMP

en: Use IPv4 connectivity as parent interface
bs: Koristi IPv4 konekciju kao parent interface

en: Use RADIUS Accounting
bs: Koristi RADIUS računanje

en: Use RADIUS Authentication
bs: Koristi RADIUS autentikaciju

en: Use RADIUS Session-Timeout attributes
bs: Koristi RADIUS timeout sesije i atribute

en: Use RAM Disks
bs: Koristi RAM diskove

en: Use TCP instead of UDP
bs: Koristi TCP umjesto UDP

en: Use a Backup RADIUS Authentication Server
bs: Koristi kopiju RADIUS autentikacijskog servera

en: Use a RADIUS server for authentication
bs: Koristi RADIUS server za autentikaciju

en: Use a TLS Key
bs: Koristi TLS ključ

en: Use a regular expression to filter the tables.
bs: Koristi regularan izraz za filtriranje tablica.

en: Use a space to separate multiple hosts (only one required). Remember to set up at least one DNS server if a host name is entered here!
bs: Koristite razmak za razdvajanje više hostova (samo jedan je potreban). Zapamtite da postavite barem jedn DNS server ako je host ime uneseno ovdje!

en: Use advanced DHCP configuration options.
bs: Koristi napredne opcije DHCP konfiguracije

en: Use advanced DHCPv6 configuration options.
bs: Koristi napredne DHCPv6 opcije konfiguracije.

en: Use anonymous binds to resolve distinguished names
bs: Koristi anonimne dodjele za razrješavanje različitih imena

en: Use fast I/O operations with UDP writes to tun/tap. Experimental.
bs: Koristi brzi U/I i operacije sa UDP pisanjima na tun/tap. Eksperimentalno

en: Use individual customized GUI options and dashboard layout for this user.
bs: Koristi individualne posebne GUI opcije i izgled kontrolne ploče za ovog korisnika.

en: Use memory file system for /tmp and /var
bs: Koristi memorijski fajl sistem za /tmp i /var

en: Use non-local gateway
bs: Koristite nelokalni gejtvej

en: Use non-local gateway through interface specific route.
bs: Koristi nelokalni gejtvej kroz interfejsovu specifičnu rutu.

en: Use public IP
bs: Koristi javni IP

en: Use same settings as DHCPv6 server
bs: Koristi iste postavke kao DHCPv6 server

en: Use sticky connections
bs: Koristi sticky konekcije

en: Use system default
bs: Koristi sistemski zadano

en: Use the configuration page for the assigned interface to change the mode.
bs: Koristi konfiguracijsku stranicu za dodijeljene interfaceove da promijene način rada.

en: Use this field to set $PORTAL_REDIRURL$ variable which can be accessed using the custom captive portal index.php page or error pages.
bs: Koristite ovo polje da postavite $PORTAL_REDIURL$ varijablu kojoj se može pristupiti kroz vlastiti zabranjeni portal index.php stranicu ili stranice greške.

en: Use this option to invert the sense of the match.
bs: Koristi ovu opciju za izvrtanje smisla poklapanja

en: Use this to choose TCP flags that must be set or cleared for this rule to match.
bs: Koristi ovo pravilo za TCP označavanje koje mora biti postavljeno ili očišćeno za ovo pravilo kod poklapanja.

en: Used for clients that do not ask for a specific expiration time. The default is 7200 seconds.
bs: Koristi se za klijente koji ne traže specifično vrijeme isteka. Zadano je 7200 sekundi.

en: Used for eg. satellite links. Expires idle connections later than default
bs: Koristi se za tzv. satelitske linkove. Odsutne konekcije ističu kasnije nego očekivano.

en: User
bs: Korisnik

en: User %s authenticated successfully.
bs: Korisnik %s automatski autentikovan.

en: User %s successfully deleted.
bs: Korisnik %s uspješno obrisan.

en: User - Config: Deny Config Write
bs: Korisnička - Konfiguracija: Odbij pisanje konfiguracije

en: User - Notices: View
bs: Korisničke - Obavijesti: Pogledaj

en: User - Notices: View and Clear
bs: Korisničke - Obavijesti: Pogledaj i očisti

en: User - Services: Captive Portal login
bs: Korisnički - Servisi: Login za zarobljeni portal

en: User - System: Copy files (scp)
bs: Korisnik - sistem: Kopiraj fajlove (scp)

en: User - System: Copy files to home directory (chrooted scp)
bs: Korisnik - sistem: Kopiraj fajlove na home direktorij (chrooted scp)

en: User - System: SSH tunneling
bs: Korisnik - Sistem: SSH tuneliranje

en: User - System: Shell account access
bs: Korisnik - sistem: Pristup shell profilu

en: User - VPN: IPsec xauth Dialin
bs: Korisnik - VPN: IPsec xauth Dialin

en: User - VPN: L2TP Dialin
bs: Korisnik - VPN: L2TP Dialin

en: User - VPN: PPPOE Dialin
bs: Korisnik - VPN: PPPOE Dialin

en: User Authentication Settings
bs: Korisničke postavke autentikacije

en: User Authentication Source
bs: Izvor korisničke autentikacije

en: User Authorization Failed
bs: Autorizacija korisnika nije uspjela

en: User Cert
bs: Korisnički certifikat

en: User Certificates
bs: Korisnički certifikati

en: User DN:
bs: Korisnički DN:

en: User Forum
bs: Korisnički forum

en: User Manager
bs: Korisnički Nalozi

en: User Max Logins must be between 1 and 255
bs: Maksimalan broj prijava korisnika mora biti između 1 i 255

en: User Password
bs: Korisnička lozinka

en: User Privileges
bs: Korisničke privilegije

en: User Properties
bs: Korisnička svojstva

en: User Settings
bs: Korisničke postavke

en: User Settings for
bs: Korisničke postavke za

en: User distinguished name
bs: Korisničko razlikovanje imena

en: User does not have access to this record
bs: Korisnik nema pristup ovom podatku

en: User logged out for user '%1$s' from: %2$s
bs: Korisnik odjavljen za korisnika '%1$s' za: %2$s

en: User manager users and groups
bs: Upravitelj korisnicima i grupama

en: User name
bs: Korisničko ime

en: User name and password are required for proxy with authentication.
bs: Korisničko ime i lozinka su neophodno za proxy sa autentikacijom.

en: User naming Attribute
bs: Atribut koji korisnik zadaje

en: User settings successfully changed for user %s.
bs: Korisničke postavke uspješno spašene za korisnika %s.

en: User table
bs: Korisnička tablica

en: User unable to administer the selected domain.
bs: Korisnik nije u mogućnosti da upravlja odabranom domenom.

en: User's full name, for administrative information only
bs: Korisničko puno ime, radi administrativne informacije samo

en: Username
bs: Korisničko ime

en: Username Alterations
bs: Alternacije korisničkog imena

en: Username for authentication to proxy server. Optional, leave blank to not use authentication.
bs: Korisničko ime za autentikaciju na proxy server. Opcionalno, ostavite prazno ako ne želite autentikaciju.

en: Username is required for all types except Namecheap, FreeDNS and Custom Entries.%1$sDNS Made Easy: Dynamic DNS ID%1$sRoute 53: Enter the Access Key ID.%1$sGleSYS: Enter the API user.%1$sDreamhost: Enter a value to appear in the DNS record comment.%1$sFor Custom Entries, Username and Password represent HTTP Authentication username and passwords.
bs: Korisničko ime je potrebno za sve tipove osim Namecheap, FreeDNS i Custom Unosa.%1$sDNS made easy: Dinamički DNS ID%1$sRoute 53: Unesite pristupni ključ.%1$sGleSYS: Unesite API korisnika.%1$sDreamhost: Unesite vrijednost koja će se pojaviti u DNS komentarima upita.%1$sZa posebne unose, korisničko ime i lozinka predstavljaju HTTP autentikacijsko korisničko ime i lozinku.

en: Username:
bs: Korisničko ime:

en: Users
bs: Korisnici

en: Users %s successfully deleted.
bs: Korisnici %s uspješno obrisani.

en: Users Logged In (%d)
bs: Prijavljeni korisnici (%d)

en: Users will be authenticated using the RADIUS server specified below. The local user database will not be used.
bs: Korisnici će biti autentikovani koristeći RADIUS server specificiran ispod. Lokalna korisnička baza podataka neće biti korištena.

en: Using a tunnel network and server bridge settings together is not allowed.
bs: Koristeći tunel mrežu i server bridge opcije zajedno nije dozvoljeno.

en: Using dial-on-demand will bring the connection up again if any packet triggers it. To substantiate this point: disconnecting manually will %1$snot%2$s prevent dial-on-demand from making connections to the outside! Don't use dial-on-demand if the line is to be kept disconnected.
bs: Koristeći dial-on-zahtjeve će dići konekciju ako je pobudi bilo koji paket. Da bi ovo razriješili: diskonektovanje ručno %1$sneće%2$s spasiti dial-on-zahtjeve od pravljenja konekcija vani! Ne koristite dial-on-zahtjev ako je linija ostala diskonektovana.

en: Utilize different network interface(s) that the DNS Resolver will use to send queries to authoritative servers and receive their replies. By default all interfaces are used.
bs: Koristi različite mrežne interface(ove) koji će DNS resolver koristiti za slanje upita autoritativnim serverima te da dobije njihove odgovore. Po zadanom, svi interfejsim će biti korišteni.

en: VGA Console
bs: VGA konzola

en: VHID Group
bs: VHID grupa

en: VLAN %1$s on %2$s
bs: VLAN %1$s na %2$s

en: VLAN Capable interfaces:
bs: VLAN mogući interface-ovi

en: VLAN Configuration
bs: VLAN konfiguracija

en: VLAN Interfaces
bs: VLAN interfejsi

en: VLAN Prio Set
bs: VLAN set Prioriteta

en: VLAN Priority
bs: VLAN prioritet

en: VLAN interfaces:
bs: VLAN interfejsi:

en: VLAN: called with wrong options. Problems with config!
bs: VLAN: pozvan sa pogrešnim opcijama. Problemi sa configom!

en: VLANs
bs: VLANovi

en: VPN Events (IPsec, OpenVPN, L2TP, PPPoE Server)
bs: VPN eventi (IPsec, OpenVPN, L2TP, PPPoE server)

en: VPN Logins
bs: VPN Logini

en: VPN:IPsec:Advanced Settings
bs: VPN:IPsec:Napredne postavke

en: Valid From
bs: Validno od

en: Valid SIM State
bs: Validno SIM stanje

en: Valid Service
bs: Ispravna usluga

en: Valid Until
bs: Validno do

en: Valid arguments for IKE type are v1, v2 or auto
bs: Validni argumenti za IKE tip su v1, v2 ili auto

en: Valid lifetime must be an integer.
bs: Validan životni vijek mora biti cijeli broj.

en: Valid time
bs: Validno vrijeme

en: Value
bs: Vrijednost

en: Values
bs: Vrijednosti

en: Vendor:
bs: Prodavač:

en: Verbosity level
bs: Nivo preopširnosti

en: Verify HTTPS certificates when downloading alias URLs
bs: Verifikuj HTTPS certifikate pri preuzimanju alias URLova

en: Verify SSL Certificate Trust
bs: Verifikuj SSL provjeru certifikata

en: Verify SSL Peer
bs: Verifikuj SSL Peer

en: Version
bs: Verzija

en: Version
bs: Verzija

en: Version information updated at
bs: Informacija o verziji updatirana

en: Version:
bs: Verzija:

en: Vertical bars (|) at start or end, or double in the middle of descriptions not allowed. Descriptions have been cleaned. Check and save again.
bs: Vertikalne linije (|) na početku ili kraju ili duple u sredini opisa nisu dozvoljene. Opisi su očišćeni. Provjeri i spasi ponovo.

en: View
bs: Pogled

en: View Capture
bs: Pogledaj snimljeno

en: View Logs
bs: Vidi logove

en: View Page Contents
bs: Prikaži Sadržaj Stranice

en: View changelog
bs: Pogledaj log promjena

en: View more information
bs: Pogledaj više informacija

en: View the NAT rule
bs: Pogledaj NAT pravilo

en: View the filter rule
bs: Vidi filter pravila

en: Virtual Address
bs: Virtuelna adresa

en: Virtual Address Pool
bs: Pool virtualnih adresa

en: Virtual IP
bs: Virtualni IP

en: Virtual IP Address
bs: Virtualna IP adresa

en: Virtual IP Password
bs: Virtualna IP lozinka

en: Virtual IP address
bs: Virtualna IP adresa

en: Virtual IPs
bs: Virtualni IP

en: Virtual IPs
bs: Virtualni IP

en: Virtual IPv6 Address Pool
bs: Pool virtualnih IPv6 adresa

en: Virtual Server Pool
bs: Pool virtualnog servera

en: Virtual Servers
bs: Virtuelni serveri

en: Visit official website
bs: Posjeti zvaničnu stranicu

en: Vlan parent interface %1$s does not exist anymore so vlan id %2$s cannot be created please fix the issue before continuing.
bs: Vlan parent interface %1$s ne postoji više tako da vlan id %2$s ne može biti kreiran, molimo popravite grešku prije nastavljanja.

en: Voucher
bs: Vaučer

en: Voucher Database Synchronization
bs: Sinhronizacija baze podataka vaučera

en: Voucher Private Key
bs: Privatni ključ vaučera.

en: Voucher Public Key
bs: Javni ključ vaučera

en: Voucher database has been synchronized from %1$s
bs: Baza podataka vaučera je sinhronizirana od %1$s

en: Voucher expired
bs: Vaučer istekao

en: Voucher invalid
bs: Neispravan vaučer

en: Voucher sync password
bs: Vaučer sinhronizacija lozinka

en: Voucher sync port
bs: Vaučer port sinhronizacije

en: Voucher sync username
bs: Vaučer sinhronizacija korisničko ime

en: Voucher(s) could not be processed.
bs: Vaučer(i) ne mogu biti procesirani.

en: Voucher(s) successfully marked.
bs: Vaučer(i) uspješno označeni.

en: Voucher: %s
bs: Vaučer: %s

en: Vouchers
bs: Vaučeri

en: Vouchers in Use (%d)
bs: Vaučeri koji se koriste (%d)

en: WAN interface will be set to obtain an address automatically from a DHCP server
bs: WAN interface će biti postavljen da bi se dobila automatska adresa od DHCP servera

en: WARNING: A name must be given as parameter to lock() function.
bs: UPOZORENJE: Ime mora biti dato kao parametar za lock() funkciju

en: WARNING: A name must be given as parameter to try_lock() function.
bs: UPOZORENJE: Ime mora biti dato kao parametar za try_lock() funkciju.

en: WARNING: Config contents could not be saved. Could not open file!
bs: UPOZORENJE: Sadržaj konfiguracije ne može biti spašen. Nemoguće otvoriti file!

en: WARNING: Could not mark subsystem: %s dirty
bs: UPOZORENJE: Nemoguće označiti subsystem: %s dirty

en: WARNING: all existing VLANs will be cleared if you proceed!
bs: UPOZORENJE: svi postojeći VLANovi će biti očišćeni ako nastavite!

en: WEP is no longer supported. It will be disabled on the %s interface and the interface will be disabled. Please reconfigure the interface.
bs: WEP više nije podržan. Bit će isključen na %s interfaceu i taj interface će biti isključen. Molimo rekonfigurišite interface.

en: WINS Servers
bs: WINS Serveri

en: WINS server enable
bs: WINS server uključi

en: WINS servers
bs: WINS serveri

en: WPA Key Management Mode
bs: WPA način upravljanja ključevima

en: WPA Pairwise
bs: WPA uparivanje

en: WPA Passphrase must be between 8 and 63 characters long
bs: WPA passfraza mora biti između 8 i 63 znakova duga.

en: WPA Pre-Shared Key
bs: WPA Pre-Shared ključ

en: WPA mode
bs: WPA način

en: Waiting for Internet connection to update pkg metadata and finish package reinstallation
bs: Čekanje na internet konekciju radi ažuriranja pkg metadate i dovršavanja paketne reinstalacije

en: Waiting period to restore pass-through credits. (Hours)
bs: Period čekanja da se povrate pass-through krediti (u satima).

en: Wake
bs: Pobudi

en: Wake All Devices
bs: Upali sve uređaje

en: Wake Device
bs: Upali uređaj

en: Wake up!
bs: Probudi!

en: Wake-on-LAN Devices
bs: Wake-on LAN uređaju

en: Warning
bs: Upozorenje

en: Warning!  DHCP Failover setup and no CARP virtual IPs defined!
bs: Upozorenje! DHCP greška pri postavljanju i nijedan CARP virtualni IP nije definisan!

en: Warning, Latency
bs: Upozorenje, kašnjenje

en: Warning, Packetloss
bs: Upozorenje, gubitak paketa

en: Warning, could not open log for writing.
bs: Upozorenje, nije moguće otvoriti log za pisanje

en: Warning, could not read file %s
bs: Upozorenje, nemoguće pročitati fajl %s

en: Warning: Missing CRL data for %s
bs: Upozorenje: Nedostaje CRL data za %s

en: Warning: The selected server certificate was not created as an SSL Server certificate and may not work as expected
bs: Upozorenje: Odabrani server certifikat nije kreiran kao SSL server certifikat i neće raditi kako je očekivano

en: Warning: These options will create persistent daily log files in /var/log/ntp.
bs: Upozorenje: Ove opcije će stvoriti trajne dnevne log fajlove u direktoriju /var/log/ntp.

en: Warning: this will terminate all current L2TP sessions!
bs: Upozorenje: ovo će okončati sve trenutne L2TP sesije!

en: Web Server Log
bs: Log web servera

en: WebCfg - AJAX: Get Service Providers
bs: WebCfg - AJAX: Preuzmi servis provajdere

en: WebCfg - AJAX: Get Stats
bs: WebCfg - AJAX: Preuzmi statistiku

en: WebCfg - All pages
bs: WebCfg - Sve stranice

en: WebCfg - Crash reporter
bs: WebCfg - Prijavljivanje krahiranja

en: WebCfg - Dashboard (all)
bs: WebCfg - Kontrolna tabla (svi)

en: WebCfg - Dashboard widgets (direct access).
bs: WebCfg - Widgeti za kontrolnu tablu (direktni pristup)

en: WebCfg - Diagnostics: ARP Table
bs: WebCfg - Dijagnostika: ARP tablica

en: WebCfg - Diagnostics: Authentication
bs: WebCfg - Dijagnostika: Autentikacija

en: WebCfg - Diagnostics: Backup & Restore
bs: WebCfg - Dijagnostika: Kopija i vraćanje postavki

en: WebCfg - Diagnostics: CPU Utilization
bs: WebCfg - Dijagnostika: Korištenje CPU

en: WebCfg - Diagnostics: Command
bs: WebCfg - Dijagnostika: Komanda

en: WebCfg - Diagnostics: Configuration History
bs: WebCfg - Dijagnostika: Povijest konfiguracija

en: WebCfg - Diagnostics: DNS Lookup
bs: WebCfg - Dijagnostika: DNS traženje

en: WebCfg - Diagnostics: Edit File
bs: WebCfg - Dijagnostika: Edituj fajl

en: WebCfg - Diagnostics: Factory defaults
bs: WebCfg - Dijagnostika: Tvorničke zadane postavke

en: WebCfg - Diagnostics: GEOM Mirrors
bs: WebCfg - Dijagnostika: GEOM Mirrori

en: WebCfg - Diagnostics: Halt system
bs: WebCfg - Dijagnostika: Zaustavi sistem

en: WebCfg - Diagnostics: Interface Traffic
bs: WebCfg - Dijagnostika: Promet interfacea

en: WebCfg - Diagnostics: Limiter Info
bs: WebCfg - Dijagnostika: Limiter informacije

en: WebCfg - Diagnostics: NDP Table
bs: WebCfg - Dijagnostika: NDP tablica

en: WebCfg - Diagnostics: Packet Capture
bs: WebCfg - Dijagnostika: Snimanje paketa

en: WebCfg - Diagnostics: Ping
bs: WebCfg - Dijagnostika: Ping

en: WebCfg - Diagnostics: Reboot System
bs: WebCfg - Dijagnostika: Restartuj sistem

en: WebCfg - Diagnostics: Reset states
bs: WebCfg - Dijagnostika: Resetuj stanja

en: WebCfg - Diagnostics: Routing tables
bs: WebCfg - Dijagnostika: Tablice preusmjeravanja

en: WebCfg - Diagnostics: S.M.A.R.T. Status
bs: WebCfg - Dijagnostika: S.M.A.R.T. Status

en: WebCfg - Diagnostics: Show Source Tracking
bs: WebCfg - Dijagnostika: Prikaži izvore praćenja

en: WebCfg - Diagnostics: Show States
bs: WebCfg - Dijagnostika: Prikaži stanja

en: WebCfg - Diagnostics: Sockets
bs: WebCfg - Dijagnositka: Socketi

en: WebCfg - Diagnostics: States Summary
bs: WebCfg - Dijagnostika: Sažetak stanja

en: WebCfg - Diagnostics: System Activity
bs: WebCfg - Dijagnostika: Sistemska aktivnost

en: WebCfg - Diagnostics: Test Port
bs: WebCfg - Dijagnostika: Testni Port

en: WebCfg - Diagnostics: Traceroute
bs: WebCfg - Dijagnostika: Traceroute

en: WebCfg - Diagnostics: pf Table IP addresses
bs: WebCfg - Dijagnostika: pf Tablica IP adrese

en: WebCfg - Diagnostics: pfInfo
bs: WebCfg - Dijagnostika: pfInfo

en: WebCfg - Diagnostics: pfTop
bs: WebCfg - Dijagnostika: pfTop

en: WebCfg - Firewall: Alias: Import
bs: WebCfg - Firewall: Alias: Uvezi

en: WebCfg - Firewall: Aliases
bs: WebCfg - Firewall: Aliasi

en: WebCfg - Firewall: Easy Rule add/status
bs: WebCfg - Firewall: Lagano pravilo dodaj/status

en: WebCfg - Firewall: NAT: 1:1: Edit
bs: WebCfg - Firewall: NAT: 1:1: Modifikuj

en: WebCfg - Firewall: NAT: NPt: Edit
bs: WebCfg - Firewall: NAT: NPt: Modifikuj

en: WebCfg - Firewall: NAT: Outbound
bs: WebCfg - Firewall: NAT: Van opsega

en: WebCfg - Firewall: NAT: Outbound: Edit
bs: WebCfg - Firewall: NAT: Van opsega: Modifikuj

en: WebCfg - Firewall: NAT: Port Forward
bs: WebCfg - Firewall: NAT: Forwarduj Port

en: WebCfg - Firewall: NAT: Port Forward: Edit
bs: WebCfg - Firewall: NAT: Forwarduj Port: Modifikuj

en: WebCfg - Firewall: Rules
bs: WebCfg - Firewall: Pravila

en: WebCfg - Firewall: Rules: Edit
bs: WebCfg - Firewall: Pravila: Modifikuj

en: WebCfg - Firewall: Schedules
bs: WebCfg - Firewall: Rasporedi

en: WebCfg - Firewall: Schedules: Edit
bs: WebCfg - Firewall: Rasporedi: Modifikuj

en: WebCfg - Firewall: Traffic Shaper
bs: WebCfg  - Firewall: Modifikovanje prometa

en: WebCfg - Firewall: Traffic Shaper: Limiters
bs: WebCfg - Firewall: Modifikovanje prometa: Limiteri

en: WebCfg - Firewall: Traffic Shaper: Queues
bs: WebCfg - Firewall: Modifikovanje prometa: Redovi

en: WebCfg - Firewall: Traffic Shaper: Wizard
bs: WebCfg - Firewall: Modifikovanje prometa: Čarobnjak

en: WebCfg - Firewall: Virtual IP Address: Edit
bs: WebCfg - Firewall: Virtualne IP Adrese: Modifikuj

en: WebCfg - Firewall: Virtual IP Addresses
bs: WebCfg - Firewall: Virtualne IP Adrese

en: WebCfg - Help pages
bs: WebCfg - Stranice za pomoć

en: WebCfg - Hidden: Detailed Status
bs: WebCfg - Skriveno: Detaljan status

en: WebCfg - Hidden: Upload Configuration
bs: WebCfg - Skriveno: Konfiguracija uploada

en: WebCfg - Interfaces: Bridge
bs: WebCfg - Interfejsi: Bridge

en: WebCfg - Interfaces: Bridge edit
bs: WebCfg - Interfejsi: Bridge modifikacija

en: WebCfg - Interfaces: GIF
bs: WebCfg - Interfejsi: GIF

en: WebCfg - Interfaces: GIF: Edit
bs: WebCfg - Interfejsi: GIF: Modifikuj

en: WebCfg - Interfaces: GRE
bs: WebCfg - Interfejsi: GRE

en: WebCfg - Interfaces: GRE: Edit
bs: WebCfg - Interfejsi: GRE: Modifikuj

en: WebCfg - Interfaces: Groups
bs: WebCfg - Interfejsi: Grupe

en: WebCfg - Interfaces: Groups: Edit
bs: WebCfg - Interfejsi: Grupe: Modifikuj

en: WebCfg - Interfaces: Interface Assignments
bs: WebCfg - Interfejsi: Zadani interfejsi

en: WebCfg - Interfaces: LAGG:
bs: WebCfg - Interfejsi: LAGG

en: WebCfg - Interfaces: LAGG: Edit
bs: WebCfg - Interfejsi: LAGG: Modifikuj

en: WebCfg - Interfaces: PPPs
bs: WebCfg - Interfejsi: PPPovi

en: WebCfg - Interfaces: PPPs: Edit
bs: WebCfg - Interfejsi: PPPovi: Modifikuj

en: WebCfg - Interfaces: QinQ
bs: WebCfg - Interfejsi: QinQ

en: WebCfg - Interfaces: QinQ: Edit
bs: WebCfg - Interfejsi: QinQ: Modifikuj

en: WebCfg - Interfaces: VLAN
bs: WebCfg - Interfejsi: VLAN

en: WebCfg - Interfaces: VLAN: Edit
bs: WebCfg - Interfejsi: VLAN: Modifikuj

en: WebCfg - Interfaces: WAN
bs: WebCfg - Interfejsi: WAN

en: WebCfg - Interfaces: Wireless
bs: WebCfg - Interfejsi: Wireless

en: WebCfg - Interfaces: Wireless: Edit
bs: WebCfg - Interfejsi: Wireless: Modifikuj

en: WebCfg - Load Balancer: Pool
bs: WebCfg - Load Balanser: Pool

en: WebCfg - Load Balancer: Pool: Edit
bs: WebCfg - Load Balanser: Pool: Modifikuj

en: WebCfg - Load Balancer: Virtual Server: Edit
bs: WebCfg - Load Balanser: Virtualni Server: Modifikuj

en: WebCfg - OpenVPN: Client Specific Override
bs: WebCfg - OpenVPN: Specifični klijent override

en: WebCfg - OpenVPN: Clients
bs: WebCfg - OpenVPN: Klijenti

en: WebCfg - OpenVPN: Servers
bs: WebCfg - OpenVPN: Serveri

en: WebCfg - Package: Edit
bs: WebCfg - Paket: Modifikuj

en: WebCfg - Package: Settings
bs: WebCfg - Paket: Postavke

en: WebCfg - Services: Captive Portal
bs: WebCfg - Servisi: Sigurnosni portal

en: WebCfg - Services: Captive Portal Voucher Rolls
bs: WebCfg - Servisi: Vaučer rollsi zabranjenog portala

en: WebCfg - Services: Captive Portal Vouchers
bs: WebCfg- Servisi: Sigurnosni portal vaučeri

en: WebCfg - Services: Captive Portal Zones
bs: WebCfg - Servisi: Zone zabranjenog portala

en: WebCfg - Services: Captive Portal: Allowed Hostnames
bs: WebCfg - Servisi: Sigurnosni portal: Dozvoljena host imena

en: WebCfg - Services: Captive Portal: Allowed IPs
bs: WebCfg - Servisi: Sigurnosni portal: Dozvoljeni IPovi

en: WebCfg - Services: Captive Portal: Edit Allowed Hostnames
bs: WebCfg - Servisi: Sigurnosni Portal: Modifikuj dozvoljena host imena

en: WebCfg - Services: Captive Portal: Edit Allowed IPs
bs: WebCfg -Servisi: Sigurnosni portal: Modifikuj dozvoljene IPove

en: WebCfg - Services: Captive Portal: Edit MAC Addresses
bs: WebCfg - Servisi: Sigurnosni Portal: Modifikuj MAC adrese

en: WebCfg - Services: Captive Portal: Edit Zones
bs: WebCfg - Servisi: Sigurnosni Portal: Modifikuj zone

en: WebCfg - Services: Captive Portal: File Manager
bs: WebCfg - Servisi: Sigurnosni Portal: Upravitelj podacima

en: WebCfg - Services: Captive Portal: Mac Addresses
bs: WebCfg - Servisi: Sigurnosni Portal: Mac adrese

en: WebCfg - Services: Check IP Service
bs: WebCfg- Servisi: Provjeri IP servis

en: WebCfg - Services: Check IP Service: Edit
bs: WebCfg - Servisi: Provjeri IP servis: Modifikuj

en: WebCfg - Services: DHCP Relay
bs: WebCfg - Servisi: DHCP Relej

en: WebCfg - Services: DHCP Server
bs: WebCfg - Servisi: DHCP Server

en: WebCfg - Services: DHCP Server: Edit static mapping
bs: WebCfg - Servisi: DHCP Server: Modifikuj statično mapiranje

en: WebCfg - Services: DHCPv6 Relay
bs: WebCfg - Servisi: DHCPv6 Relej

en: WebCfg - Services: DHCPv6 Server
bs: WebCfg - Servisi: DHCPv6 Server

en: WebCfg - Services: DHCPv6 Server: Edit static mapping
bs: WebCfg - Servisi: DHCPv6 Server: Modifikuj statično mapiranje

en: WebCfg - Services: DNS Forwarder
bs: WebCfg - Servisi: DNS Prosljeđivač

en: WebCfg - Services: DNS Forwarder: Edit Domain Override
bs: WebCfg - Servisi: DNS Prosljeđivač: Modifikuj override domene

en: WebCfg - Services: DNS Forwarder: Edit host
bs: WebCfg - Servisi: DNS Prosljeđivač: Modifikuj host

en: WebCfg - Services: DNS Resolver
bs: WebCfg - Servisi: DNS Resolver

en: WebCfg - Services: DNS Resolver: Access Lists
bs: WebCfg - Servisi: DNS Resolver: Pristupne liste

en: WebCfg - Services: DNS Resolver: Advanced
bs: WebCfg - Servisi: DNS Resolver: Napredno

en: WebCfg - Services: DNS Resolver: Edit Domain Override
bs: WebCfg - Servisi: DNS Resolver: Modifikuj override domene

en: WebCfg - Services: DNS Resolver: Edit host
bs: WebCfg - Servisi: DNS Resolver: Modifikuj host

en: WebCfg - Services: Dynamic DNS client
bs: WebCfg - Servisi: Dinamički DNS klijent

en: WebCfg - Services: Dynamic DNS clients
bs: WebCfg - Servisi: Dinamički DNS klijenti

en: WebCfg - Services: IGMP Proxy
bs: WebCfg - Servisi: IGMP Proxy

en: WebCfg - Services: IGMP Proxy: Edit
bs: WebCfg - Servisi: IGMP Proxy: Modifikuj

en: WebCfg - Services: Load Balancer: Monitor: Edit
bs: WebCfg - Servisi: Load Balanser: Monitori: Modifikacija

en: WebCfg - Services: Load Balancer: Monitors
bs: WebCfg - Servisi: Load Balanser: Monitori

en: WebCfg - Services: Load Balancer: Settings
bs: WebCfg - Servisi: Load Balanser: Postavke

en: WebCfg - Services: Load Balancer: Virtual Servers
bs: WebCfg - Servisi: Load Balanser: Virtualni Serveri

en: WebCfg - Services: NTP ACL Settings
bs: WebCfg - Servisi: NTP ACL Postavke

en: WebCfg - Services: NTP PPS
bs: WebCfg - Servisi: NTP PPS

en: WebCfg - Services: NTP Serial GPS
bs: WebCfg - Servisi: NTP Serijski GPS

en: WebCfg - Services: NTP Settings
bs: WebCfg - Servisi: NTP Postavke

en: WebCfg - Services: PPPoE Server
bs: WebCfg - Servisi: PPPoE server

en: WebCfg - Services: PPPoE Server: Edit
bs: WebCfg - Servisi: PPPoE server: Modifikuj

en: WebCfg - Services: RFC 2136 Client: Edit
bs: WebCfg - Servisi: RFC 2136 Klijenti: Modifikuj

en: WebCfg - Services: RFC 2136 Clients
bs: WebCfg - Servisi: RFC 2136 Klijenti

en: WebCfg - Services: Router Advertisements
bs: WebCfg - Servisi: Router reklame

en: WebCfg - Services: SNMP
bs: WebCfg - Servisi: SNMP

en: WebCfg - Services: UPnP
bs: WebCfg - Servisi: UPnP

en: WebCfg - Services: Wake-on-LAN
bs: WebCfg - Servisi: Wake-on-LAN

en: WebCfg - Services: Wake-on-LAN: Edit
bs: WebCfg - Servisi: Wake-on-LAN: Modifikuj

en: WebCfg - Status: CPU load
bs: WebCfg - Status: Zauzetost CPU

en: WebCfg - Status: Captive Portal
bs: WebCfg - Status: Skriveni portal

en: WebCfg - Status: Captive Portal Voucher Rolls
bs: WebCfg - Status: Skriveni portal roll vaučera

en: WebCfg - Status: Captive Portal Vouchers
bs: WebCfg - Status: Skriveni portal vaučeri

en: WebCfg - Status: Captive Portal: Expire Vouchers
bs: WebCfg - Status: Skriveni portal: Isticanje vaučera

en: WebCfg - Status: Captive Portal: Test Vouchers
bs: WebCfg - Status: Skriveni portal: Testni vaučeri

en: WebCfg - Status: DHCP leases
bs: WebCfg - Status: DHCP posudbe

en: WebCfg - Status: DHCPv6 leases
bs: WebCfg - Status: DHCPv6 posudbe

en: WebCfg - Status: Filter Reload Status
bs: WebCfg - Status: Status reučitavanja filtera

en: WebCfg - Status: Gateway Groups
bs: WebCfg - Status: Gejtvej Grupe

en: WebCfg - Status: Gateways
bs: WebCfg - Status: Gejtveji

en: WebCfg - Status: IPsec: Leases
bs: WebCfg - Status: IPsec: Posudbe

en: WebCfg - Status: Interfaces
bs: WebCfg - Status: Interfejsi

en: WebCfg - Status: Load Balancer: Pool
bs: WebCfg - Status: Balanser učitavanja: Pool

en: WebCfg - Status: Load Balancer: Virtual Server
bs: WebCfg - Status: Balanser učitavanja: Virtualni server

en: WebCfg - Status: Logs: DHCP
bs: WebCfg - Status: Logovi: DHCP

en: WebCfg - Status: Logs: Firewall
bs: WebCfg - Status: Logovi: Firewall

en: WebCfg - Status: Logs: Gateways
bs: WebCfg - Status: Logovi: Gejtveji

en: WebCfg - Status: Logs: Resolver
bs: WebCfg - Status: Logovi: Resolver

en: WebCfg - Status: Logs: Settings
bs: WebCfg - Status: Logovi: Postavke

en: WebCfg - Status: Logs: System
bs: WebCfg - Status: Logovi: Sistem

en: WebCfg - Status: Logs: VPN
bs: WebCfg - Status: Logovi: VPN

en: WebCfg - Status: Package logs
bs: WebCfg - Status: Log paketi

en: WebCfg - Status: Services
bs: WebCfg - Status: Servisi

en: WebCfg - Status: System Logs: Firewall (Dynamic View)
bs: WebCfg - Status: Sistemski logovi: Firewall (Dinamički pregled)

en: WebCfg - Status: System Logs: Firewall Log Summary
bs: WebCfg - Status: Sistemski logovi: Sažeti Firewall log

en: WebCfg - Status: System Logs: IPsec VPN
bs: WebCfg - Status: Sistemski logovi: IPsec VPN

en: WebCfg - Status: System Logs: Load Balancer
bs: WebCfg - Status: Sistemski logovi: Balanser učitavanja

en: WebCfg - Status: System Logs: NTP
bs: WebCfg - Status: Sistemski logovi: NTP

en: WebCfg - Status: System Logs: OpenVPN
bs: WebCfg - Status: Sistemski logovi: OpenVPN

en: WebCfg - Status: System Logs: Portal Auth
bs: WebCfg - Status: Sistemski logovi: Portal za autentikaciju

en: WebCfg - Status: System Logs: Routing
bs: WebCfg - Status: Sistemski logovi: Preusmjeravanje

en: WebCfg - Status: System Logs: Wireless
bs: WebCfg - Status: Sistemski logovi: Wireless

en: WebCfg - Status: Traffic Graph
bs: WebCfg - Status: Grafike

en: WebCfg - Status: Traffic Shaper: Queues
bs: WebCfg - Status: Upravljanje prometom: Redovi

en: WebCfg - Status: UPnP Status
bs: WebCfg - Status: UPnP status

en: WebCfg - System: Advanced: Admin Access Page
bs: WebCfg - Sistem: Napredno: Stranica pristupa administratora

en: WebCfg - System: Advanced: Firewall & NAT
bs: WebCfg - Sistem: Napredno: Firewall & NAT

en: WebCfg - System: Advanced: Miscellaneous
bs: WebCfg - Sistem: Napredno: Razno

en: WebCfg - System: Advanced: Networking
bs: WebCfg - Sistem: Napredno: Umrežavanje

en: WebCfg - System: Advanced: Notifications
bs: WebCfg - Sistem: Napredno: Notifikacije

en: WebCfg - System: Advanced: Tunables
bs: WebCfg - Sistem: Napredno: Tunables

en: WebCfg - System: Authentication Servers
bs: WebCfg - Sistem: Serveri autentikacije

en: WebCfg - System: CA Manager
bs: WebCfg - Sistem: CA Upravitelj

en: WebCfg - System: CRL Manager
bs: WebCfg - Sistem: CRL Upravitelj

en: WebCfg - System: Certificate Manager
bs: WebCfg - Sistem: Upravitelj certifikatima

en: WebCfg - System: Gateway Groups
bs: WebCfg  - Sistem: Gejtvej grupe

en: WebCfg - System: Gateways
bs: WebCfg - Sistem: Gejtveji

en: WebCfg - System: Gateways: Edit Gateway
bs: WebCfg - Sistem: Gejtveji: Modifikuj gateway

en: WebCfg - System: Gateways: Edit Gateway Groups
bs: WebCfg - Sistem: Gejtveji: Modifikuj gateway grupe

en: WebCfg - System: General Setup
bs: WebCfg - Sistem: Generalni setup

en: WebCfg - System: Group Manager
bs: WebCfg - Sistem: Upravitelj grupa

en: WebCfg - System: Group Manager: Add Privileges
bs: WebCfg - Sistem: Upravitelj grupa: Dodaj privilegije

en: WebCfg - System: High Availability Sync
bs: WebCfg - Sistem: Visokodostupno sinhroniziranje

en: WebCfg - System: License
bs: WebCfg - Sistem: Licenca

en: WebCfg - System: Login / Logout / Dashboard
bs: WebCfg - Sistem: Prijava / Odjava / Kontrolna tabla

en: WebCfg - System: Package Manager
bs: WebCfg - Sistem: Upravljanje paketima

en: WebCfg - System: Package Manager: Install Package
bs: WebCfg - Sistem: Upravljanje paketima: Instaliraj paket

en: WebCfg - System: Package Manager: Installed
bs: WebCfg - Sistem: Upravljanje Paketima: Instalirano

en: WebCfg - System: Static Routes
bs: WebCfg - Sistem: Statične Rute

en: WebCfg - System: Static Routes: Edit route
bs: WebCfg - Sistem: Statične Rute: Izmjena rute

en: WebCfg - System: Update: Settings
bs: WebCfg - Sistem: Ažuriranje: Postavke

en: WebCfg - System: User Manager
bs: WebCfg - Sistem: Upravljanje korisnicima

en: WebCfg - System: User Manager: Add Privileges
bs: WebCfg - Sistem: Upravljanje korisnicima: Dodaj privilegije

en: WebCfg - System: User Manager: Settings
bs: WebCfg - Sistem: Upravljanje korisnicima: Postavke

en: WebCfg - System: User Password Manager
bs: WebCfg - Sistem: Upravitelj korisničkim lozinkama

en: WebCfg - System: User Settings
bs: WebCfg - Sistem: Korisničke postavke

en: WebCfg - VPN: IPsec: Edit Phase 1
bs: WebCfg - VPN: IPsec: Modifikuj fazu 1

en: WebCfg - VPN: IPsec: Edit Phase 2
bs: WebCfg - VPN: IPsec: Modifikuj fazu 2

en: WebCfg - VPN: IPsec: Edit Pre-Shared Keys
bs: WebCfg - VPN: IPsec: Modifikuj predšerovanu listu ključeva

en: WebCfg - VPN: IPsec: Pre-Shared Keys List
bs: WebCfg - VPN: IPsec: Predšerovana lista ključeva

en: WebCfg - VPN: IPsec: Settings
bs: WebCfg VPN: IPsec: Postavke

en: WebCfg - VPN: L2TP: Users
bs: WebCfg - VPN: L2TP: Korisnici

en: WebCfg - VPN: L2TP: Users: Edit
bs: WebCfg - VPN: L2TP: Korisnici: Modifikuj

en: WebCfg - XMLRPC Interface Stats
bs: WebCfg - XMLRPC Interface statistika

en: WebCfg - XMLRPC Library
bs: WebCfg - XMLRPC biblioteka

en: WebCfg - pfSense wizard subsystem
bs: WebCfg - pfSense subsistemski wizard

en: WebGUI Login Autocomplete
bs: WebGUI Prijava Automatski popunjena

en: WebGUI login messages
bs: WebGUI poruke prijave

en: WebGUI process is restarting.
bs: WebGUI proces se ponovo pokreće.

en: WebGUI redirect
bs: WebGUI preusmjeravanje

en: Wed
bs: Sri

en: Weekly
bs: Sedmično

en: Weekly (0 0 * * 0)
bs: Sedmično (0 0 * * 0)

en: Weight
bs: Težina

en: Weight for this gateway when used in a Gateway Group.
bs: Težina ovog gejtveja kada se koristi u gejtvej grupi.

en: Weight must be an integer between 1 and 100.
bs: Težina mora biti cijeli broj između 1 i 100

en: Welcome to %s!
bs: Dobrodošli u %s!

en: Welcome to the %s Captive Portal!
bs: Dobrodošli u %s zabranjeni portal

en: Welcome to the %s Traffic Shaper.
bs: Dobrodošli u %s Oblikovanje saobraćaja

en: When
bs: Kad

en: When Signing a Certificate Request, existing attributes in the request cannot be copied. The attributes below will be applied to the resulting certificate.
bs: Kad se certifikat potpisuje, postojeći atributi ne mogu biti kopirani. Atributi ispod će biti aplicirani na napravljeni certifikat.

en: When a certificate-based client logs in, do not accept certificates below this depth. Useful for denying certificates made with intermediate CAs generated from the same CA as the server.
bs: Kada certifikatni klijent se prijavi, ne prihvataj certifikate koji su ispod ove dubine. Korisno za odbijanje certifikata stvorenih sa naprednim CAovima generisanih od istog CA kao server.

en: When authenticating users, enforce a match between the common name of the client certificate and the username given at login.
bs: Kada autentikovani korisnici forsiraju poklapanje između zajedničkog imena klijent certifikata i korisničkog imena datog na prijavi.

en: When both peers support NCP and have it enabled, NCP overrides the Encryption Algorithm above.
bs: Kada oba peera podržavaju NCP i imaju ga uključenog, NCP overridea enkripcijski algoritam iznad.

en: When checked, traceroute will attempt to perform a PTR lookup to locate hostnames for hops along the path. This will slow down the process as it has to wait for DNS replies.
bs: Kada je selektovano, traceroute će pokušati uraditi PTR traženje za lociranje host imena za skokove duž putanje. Ovo će usporiti proces jer je potrebno čekati na DNS odgovore.

en: When disabled, only the selected Encryption Algorithm is allowed.
bs: Kada je isključeno, samo selektovani enkripcijski algoritam je dozvoljen.

en: When disabled, the rule will not have any effect.
bs: Kada je isključeno, ovo pravilo neće imati nikakvog efekta.

en: When enabled, a MAC passthrough entry is automatically added after the user has successfully authenticated. Users of that MAC address will never have to authenticate again. To remove the passthrough MAC entry either log in and remove it manually from the %1$sMAC tab%2$s or send a POST from another system. If this is enabled, RADIUS MAC authentication cannot be used. Also, the logout window will not be shown.
bs: Kad je uključeno, MAC prolaz je automatski dodan nakon što je korisnik uspješno autentikovan. Korisnici te MAC adrese nikad neće trebati da se ponovo autenticiraju. Da uklonite ovo, ili se prijavite i uklonite ga ručno iz kartice %1$sMAC tab%2$s ili pošaljite POST sa drugog sistema. Ako je ova opcija uključena, RADIUS MAC autentikacija ne može biti korištena. Također, logout prozor neće biti prikazan.

en: When enabled, authorized keys need to be configured for each %1$suser%2$s that has been granted secure shell access.
bs: Kad je uključeno, autorizovani ključevi trebaju biti konfigurisani za svakog %1$skorisnika%2$s kojem je dodijeljen pristup sigurnom shellu.

en: When enabled, clients will be disconnected after the amount of time retrieved from the RADIUS Session-Timeout attribute.
bs: Kada je uključeno, klijenti će biti diskonektovani nakon količine vremena preuzete sa RADIUS sesije-Timeout atributa.

en: When enabled, data counts for RADIUS accounting packets will be taken from the client perspective, not the NAS. Acct-Input-Octets will represent download, and Acct-Output-Octets will represent upload.
bs: Kada je uključena, brojač podataka za RADIUS računanje paketa će biti uzet iz klijentske perspektive, ne NAS. Acct-Input-Octeti će prezentovati preuzimanje i Acct-Output-Octeti će prezentovati upload.

en: When enabled, if a client is disconnected for exceeding the idle timeout the time spent idle is included in the total session time. Otherwise the session time reported to the RADIUS server is the time between when the session started and when the last activity was recorded.
bs: Kada je uključeno, ako se klijent isključi zbog premašivanja vremena odsustva koje je proveo u ukupnom vremenu sesije. Inače se vrijeme sesije šalje RADIUS serveru i to je vrijeme kad je sesija započeta do vremena kad je zadnja aktivnost zabilježena

en: When enabled, the AUTO_LINKLOCAL flag is set on the bridge interface and cleared on every member interface. This is required when the bridge interface is used for stateless autoconfiguration.
bs: Kada je omogućen, AUTO_LINKLOCAL zastavica je postavljena na most interfejs i sklonjena sa svakog član interfejsa. Ovo je neophodno kad je most interfejs korišten za bez-stajnu auto-konfiguraciju.

en: When enabled, the username and password will be transmitted over an HTTPS connection to protect against eavesdroppers. A server name and certificate must also be specified below.
bs: Kad je uključeno, korisničko ime i lozinka će biti poslani preko HTTPS konekcije da bi zaštitili sebe protiv prisluškivanja. Ime servera i certifikat moraju biti specificirani.

en: When enabled, this option can cause an increase of around 10% more DNS traffic and load on the server, but frequently requested items will not expire from the cache.
bs: Kad je uključena, ova opcija može povećati 10% DNS prometa i opterećenja na serveru ali često traženi predmeti neće isteći iz keša.

en: When operating as an access point in 802.11g mode, allow only 11g-capable stations to associate (11b-only stations are not permitted to associate)
bs: Pri operacijama kao pristupnoj tački u 802.11g načinu, dozvoli samo 11g-mogućim stanicama da učestvuju (11b-samo stanice nisu u mogućnosti da učestvuju)

en: When operating as an access point, allow only stations capable of the selected wireless standard to associate (stations not capable are not permitted to associate)
bs: Pri operacijama kao pristupnoj tački, dozvoli svim stanicama koje su u stanju za asociranje selektovanog wireless standarda (stanice koje nisu u stanju nisu u mogućnosti da učestvuju)

en: When reaching this number of state entries, all timeout values become zero, effectively purging all state entries immediately.  This value is used to define the scale factor, it should not actually be reached (set a lower state limit, see below). Defaults to 120% of the Firewall Maximum States value
bs: Kada se dostigne ovaj broj unosa stanja, sve vrijednosti isteka postaju nula tako da efektivno uklanjaju sve unose stanja. Ova vrijednost se koristi za definisanje faktora skaliranja, vrijednosti koja ne bi ustvari nikada trebala biti dostignuta (postavite niži limit stanja, pogledajte ispod). Zadano je 120% maksimalne vrijednosti firewall stanja.

en: When set, all users will be authenticated using the RADIUS server specified below. The local user database will not be used.
bs: Kada je postavljeno, svi korisnici će biti autentikovani koristeći RADIUS server specificiran ispod. Lokalna korisnička baza podataka neće biti korištena.

en: When set, the server must provide a valid certificate trust chain which can be verified by this firewall.
bs: Kada je postavljeno, server mora dati validan povjerljiv lanac certifikata koji mogu biti verifikovani firewallom.

en: When the number of state entries exceeds this value, adaptive scaling begins.  All timeout values are scaled linearly with factor (adaptive.end - number of states) / (adaptive.end - adaptive.start). Defaults to 60% of the Firewall Maximum States value
bs: Kada broj stanja unosa pređe ovu vrijednost, adaptivno skaliranje počinje. Sve vrijednosti isteka u skalirani linearno sa faktorom (adaptive.end - broj stanja) / (adaptive.end - adaptive.start). Zadano je 60% maksimalne vrijednosti firewall stanja.

en: When the page has finished loading, the output is stored in %1$s. It may be downloaded via scp or using this button:
bs: Kada stranica završi sa učitavanjem, izlaz je sačuvan u %1$s. Može biti preuzeta sa scp ili klikom na ovo dugme:

en: When this is checked, login credentials for the webConfigurator may be saved by the browser. While convenient, some security standards require this to be disabled. Check this box to enable autocomplete on the login form so that browsers will prompt to save credentials (NOTE: Some browsers do not respect this option).
bs: Kada je ovo odabrano, login podaci za webConfigurator mogu biti spašeni od strane browsera. Iako pouzdano, neki sigurnosni standardi zahtijevaju da se ovo isključi. Odaberite ovu kockicu da uključite automatsko popunjavanje forme za prijavu tako da browseri će tražiti da li da spase podatke (NAPOMENA: Neki browseri ovu opciju ne podržavaju).

en: When this is checked, startup and shutdown sounds will no longer play.
bs: Kada je ovo odabrano, zvukovi pokretanja i gašenja se neće čuti.

en: When this is checked, successful logins to the webConfigurator will not be logged.
bs: Kada je ovo selektovano, uspješne prijave na webConfigurator neće biti logovane.

en: When this is unchecked, access to the webConfigurator is always permitted even on port 80, regardless of the listening port configured. Check this box to disable this automatically added redirect rule.
bs: Kada ova opcija nije označena, pristup webConfiguratoru je uvijek zabranjen čak i na portu 80, neovisno od toga kako je konfigurisan port koji se prati. Odaberite ovu opciju da isključite automatski dodano pravilo redirektanja.

en: When this is unchecked, access to the webConfigurator is protected against HTTP_REFERER redirection attempts. Check this box to disable this protection if it interferes with webConfigurator access in certain corner cases such as using external scripts to interact with this system. More information on HTTP_REFERER is available from %1$sWikipedia%2$s
bs: Kada ovo nije selektovano, pristup webConfiguratoru je zaštićen od HTTP _REFERER pokušaja redirekcije. Odaberite ovu opciju da isključite zaštitu ako se miješa sa webConfigurator pristup u određenim graničnim slučajevima poput korištenja eksternih skripti za interakciju sa sistemom. Više informacija o HTTP _REFERER je dostupno na %1$sWikipedia%2$s

en: When this is unchecked, access to the webConfigurator on the %1$s interface is always permitted, regardless of the user-defined firewall rule set. Check this box to disable this automatically added rule, so access to the webConfigurator is controlled by the user-defined firewall rules (ensure a firewall rule is in place that allows access, to avoid being locked out!) %2$sHint: the &quot;Set interface(s) IP address&quot; option in the console menu resets this setting as well.%3$s
bs: Kada ovo nije označeno, pristup webConfiguratoru na %1$s interfaceu je uvijek zabranjen, neovisno od korisnički definisanih pravila za firewall. Označite ovu opciju da isključite ovo automatski dodano pravilo tako da je pristup webConfiguratoru kontrolisan korisnički definisanim firewall pravilima (pobrinite se da je firewall pravilo podešeno tako da dozvoljava pristup i da ćete moći regularno izaći iz njeg!)%2$sSavjet: &quot; Postavi interface(ov) IP adresu &quot; opciju u konzolnom meniju resetuje i ovu postavku također. %3$s

en: When this is unchecked, the browser tab shows the host name followed by the current page. Check this box to display the current page followed by the host name.
bs: Kada ovo nije označeno, browser tab prikazuje host ime praćeno sa trenutnom stranicom. Klikni ovaj kvadratić da prikažeš trenutnu stranicu praćenu host imenom.

en: When this is unchecked, the system is protected against %1$sDNS Rebinding attacks%2$s. This blocks private IP responses from the configured DNS servers. Check this box to disable this protection if it interferes with webConfigurator access or name resolution in the environment.
bs: Kada ovo nije odabrano, sistem je zaštićen od %1$sDNS napada ponovne dodjele%2$s. Ovo blokira privatne IP odgovore sa konfigurisanih DNS servera. Odaberite ovu opciju da isključite ovu zaštitu ako se miješa sa webConfigurator-skim pristupom ili imenom rezolucije u okruženju.

en: When to trigger exclusion of a member
bs: Kada aktivirati isključenje člana

en: When using IPv4, the target host must be an IPv4 address or hostname.
bs: Pri korištenju IPv4 zadani host mora biti IPv4 adresa ili host ime.

en: When using IPv6, the target host must be an IPv6 address or hostname.
bs: Pri korištenju IPv6, meta host mora biti IPv6 adresa ili host ime.

en: When using TAP mode as a multi-point server, a DHCP range may optionally be supplied to use on the interface to which this TAP instance is bridged. If these settings are left blank, DHCP will be passed through to the LAN, and the interface setting above will be ignored.
bs: Pri korištenju TAP načina kao multi-point servera, DHCP domet može opcionalno biti dat za korištenje na interfejsu na kojem ova TAP instanca je bridgeovana. Ako su ove postavke ostavljene prazne, DHCP će biti dat kroz LAN i interfejs iznad će biti ignorisan.

en: When using multiple WAN connections there should be at least one unique DNS server per gateway.
bs: Kada se koristi više WAN konekcija, trebao bi biti bar jedan jedinstven DNS server po gatewayu.

en: Where to show rule descriptions
bs: Gdje treba prikazati opise pravila

en: Whether a particular participant ID should be kept unique, with any new IKE_SA using an ID deemed to replace all old ones using that ID. Participant IDs normally are unique, so a new IKE_SA using the same ID is almost invariably intended to replace an old one. The difference between %1$sno%2$s and %1$snever%2$s is that the old IKE_SAs will be replaced when receiving an INITIAL_CONTACT notify if the option is no but will ignore these notifies if %1$snever%2$s is configured. The daemon also accepts the value %1$skeep%2$s to reject new IKE_SA setups and keep the duplicate established earlier. Defaults to Yes.
bs: U ovisnosti od toga da li ID učesnika treba biti jedinstven, sa bilo kojim novim IKE_SA koristeći ID određen za mijenjanje svih starih koji koriste taj ID. IDovi korisnika su obično jedinstveni, tako da novi IKE_SA koji koristi isti ID je gotovo invarijatno namijenjen za zamjenu starog. Razlika između %1$sne%2$s i %1$snikad%2$s je ta da stari IKE_SAovi će biti zamijenjeni pri primanju INITIAL_CONTACT notifikacije ako je opcija ne ali će se ovi unosi ignorisati ako je konfigurisana opcija %1$snikad%2$s. Daemon također prihvata vrijednost %1$szadrži%2$s za odbijanje novih IKE_SA postavki i zadržava duplikate koji su stvoreni ranije. Zadani izbor je Yes.

en: Whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done.
bs: Da li ponovna dodjela ključa IKE_SA treba reautenticirati peer. U IKEv1 se reautentikacija uvijek vrši.

en: Who are you reply
bs: Ko si ti odgovor

en: Who are you request
bs: Ko si ti zahtjev

en: Widget configuration has been changed.
bs: Postavka widgeta je spašena.

en: Widget height
bs: Visina widgeta

en: Widget title
bs: Naslov widgeta

en: Will advertise this router with all configuration through a DHCPv6 server.
bs: Će reklamirati ovaj router sa konfiguracijom kroz DHCPv6 server.

en: Will advertise this router with configuration through a DHCPv6 server and/or stateless autoconfig.
bs: Će reklamirati ovaj router sa konfiguracijom kroz DHCPv6 server i/ili automatsku konfiguraciju bez stanja.

en: Will advertise this router with stateless autoconfig and other configuration information available via DHCPv6.
bs: Će reklamirati ovaj router sa automatskom konfiguracijom bez stanja i drugim informacijama o konfiguraciji koije su dostupne putem DHCPv6.

en: Will advertise this router with stateless autoconfig.
bs: Će reklamirati ovaj router sa automatskom konfiguracijom bez stanja

en: Will advertise this router.
bs: Će reklamirati ovaj router

en: Wireless Events (hostapd)
bs: Wireless eventovi (hostapd)

en: Wireless Interface Configuration
bs: Konfiguracija wireless interfacea

en: Wireless Interfaces
bs: Wireless interfejsi

en: Wireless interfaces must be created on the Wireless tab before they can be assigned.
bs: Wireless interfejsi moraju biti kreirani na Wireless tabu prije nego će biti dodijeljeni.

en: With Multi-WAN it is generally desired to ensure traffic leaves the same interface it arrives on, hence reply-to is added automatically by default. When using bridging, this behavior must be disabled if the WAN gateway IP is different from the gateway IP of the hosts behind the bridged interface.
bs: Sa Multi-WANom je obično željeno da se osigura da promet izađe iz istog interfacea na koji stiže, tako da je reply-to dodan automatski kao zadano svojstvo. Kada se koristi bridgeanje, ovo ponašanje mora biti isključeno ako WAN gateway IP je drugačiji od gateway IPova hostova iza bridgeovanog interfacea.

en: With Multi-WAN it is generally desired to ensure traffic reaches directly connected networks and VPN networks when using policy routing. This can be disabled for special purposes but it requires manually creating rules for these networks.
bs: Sa Multi-WANom je obično željeno da se osigura da promet stigne direktno sa spojenih mreža i VPN mreža ako se koristi logika preusmjeravanja. Ovo može biti isključeno za posebne slučajeve ali je potrebno ručno dodati pravila za ove mreže.

en: With a supported CPU, selecting a thermal sensor will load the appropriate driver to read its temperature. Setting this to "None" will attempt to read the temperature from an ACPI-compliant motherboard sensor instead, if one is present. If there is not a supported thermal sensor chip in the system, this option will have no effect. To unload the selected module, set this option to "none" and then reboot.
bs: Kada podržani CPU, pri biranju termalnog senzora će učitati odgovarajući drajver kako bi očitao njegovu temperaturu. Postavljanje ove postavke na "none" će pokušati očitavati temperaturu sa ACPI-compliant senzora matične ploče, ako takav postoji. Ako nije podržan termalni čip senzor u sistemu, ova opcija neće imati nikakvog efekta. Za ponovo učitavanje selektovanog modula, stavite ovu opciju na "none" i zatim ponovo pokrenite.

en: Wizards
bs: Čarobnjaci

en: WoL Server settings
bs: WoL server postavke

en: Would you like to remove the LAN IP address and 
    unload the interface now [y|n]?
bs: Da li želite da uklonite LAN IP adresu i ispraznite interface [y|n]?

en: Writing configuration...
bs: Pisanje konfiguracije

en: Wrong Interface
bs: Pogrešan interface

en: Wrong data submitted
bs: Pogrešni podaci uneseni

en: Wrong index supplied
bs: Dat pogrešan indeks

en: Wrong parameters supplied
bs: Pogrešni parametri dati

en: Wrong parameters used during interface_bring_down
bs: Pogrešni parametri uneseni prilikom korištenja interface_bring_down

en: Wrong password - Remember password is case sensitive.
bs: Pogrešna lozinka - zapamtite da su lozinke osjetljive na velika i mala slova

en: Wrong values - Update could not be completed.
bs: Pogrešne vrijednosti - Ažuriranje nije moglo biti završeno.

en: XML configuration file not found.  %s cannot continue booting.
bs: Konfiguracijski fajl XMLa nije pronađen. %s nemoguće nastaviti učitavanje.

en: XML error: %1$s at line %2$d
bs: XML greška: %1$s u liniji %2$d

en: XML error: %1$s at line %2$d cannot occur more than once
bs: XML greška: %1$s u liniji %2$s se ne može pojaviti više od jednom

en: XML error: %1$s at line %2$d in %3$s
bs: XML greška: %1$s u liniji %2$d u %3$s

en: XML error: no %s object found!
bs: XML greška :nijedan %s objekt nije nađen

en: XML error: unable to open file
bs: XML greška: nemoguće otvoriti fajl

en: Yes
bs: Da

en: You have chosen to remove the LAN interface.
bs: Odabrali ste da uklonite LAN interface.

en: ZDA or ZDG
bs: ZDA ili ZDG

en: Zone
bs: Zona

en: Zone Critical
bs: Kritična zona

en: Zone ID
bs: ID Zone

en: Zone Warning
bs: Upozorenje zone

en: Zone [%s] already exists.
bs: Zona [%s] već postoji.

en: Zone description
bs: Opis zone

en: Zone name
bs: Ime zone

en: Zone name. Can only contain letters, digits, and underscores (_) and may not start with a digit.
bs: Ime zone. Može sadržavati samo slova, cifre i donje crte (_) i ne smije počinjati sa cifrom.

en: Zone or Host ID was not found, check the hostname.
bs: Zona ili Host ID nije pronađen, provjeri hostname.

en: [%s] already allowed.
bs: [%s] je već dozvoljen.

en: [%s] already exists.
bs: [%s] već postoji

en: [TDR DEBUG] status true -- rule type '%s'
bs: [TDR DEBUG] status true -- tip pravila'%s'

en: _checkStatus() results: %1$s
bs: _checkStatus() rezultati: %1$s

en: active
bs: aktivno

en: advanced setting
bs: napredne postavke

en: any
bs: bilo koji

en: autoselect
bs: auto selekcija

en: basic
bs: osnovno

en: bits
bs: bitovi

en: blocking
bs: blokira

en: bridgeif not defined -- could not bring interface up
bs: bridgeif nije definisan -- nemoguće pokrenuti interface

en: built on
bs: građeno na

en: calling interface_dhcpv6_configure.
bs: pozivam interface_dhcpv6_configure.

en: cant read %1$s/voucher_%2$s_used_%3$s.db
bs: nemoguće čitati %1$s/voucher_%2$s_used_%3$s.db

en: cant write %1$s/voucher_%2$s_used_%3$s.db
bs: nemoguće pisati %1$s/voucher_%2$s_used_%3$s.db

en: check for ethernet loops
bs: provjeri za ethernet petlje

en: click to toggle enabled/disabled status
bs: klikni da uključite/isključite status

en: client
bs: klijent

en: could not bring gifif up -- variable not defined
bs: Nije moguće pokrenuti gifif -- varijabla nije definisana

en: could not bring realif up -- variable not defined -- interface_gif_configure()
bs: Nije moguće pokrenuti realif -- varijabla nije definisiana -- interface_gif_configure()

en: created '%s' vs:
bs: kreiran '%s' vs:

en: cron based reset
bs: cron bazirano resetovanje

en: default
bs: zadano

en: delete
bs: obriši

en: delete phase2 entry
bs: Obriši phase2 unos

en: delete this separator
bs: obriši ovaj separator

en: device not present! Is the modem attached to the system?
bs: Uređaj nije prisutan! Da li je modem uključen u sistem?

en: dhcp6 init complete. Continuing
bs: dhcp6 inicijalizacija gotova. Nastavljam

en: dhcp6c will send a release to the ISP on exit, some ISPs then release the allocated address or prefix. This option prevents that signal ever being sent
bs: dhcp6c će poslati zahtjev ISPu na izlazu, neki ISPovi onda puštaju alociranu adresu ili prefiks. Ova opcija sprječava da se taj signal ikad pošalje

en: disabled
bs: isključeno

en: disabled route to %s
bs: Isključena ruta ka %s

en: done
bs: završeno

en: done.
bs: Završeno.

en: done.%s
bs: završeno. %s

en: dpinger: No dpinger session running for gateway %s
bs: dpinger: Niti jedna dpinger sesija nije pokrenuta za gateway %s

en: dpinger: cannot connect to status socket %1$s - %2$s (%3$s)
bs: dpinger: nemoguće spajanje na statusnu utičnicu %1$s - %2$s (%3$s)

en: dynamic
bs: dinamička

en: e.g. user@host becomes user when unchecked.
bs: e.g. user@host postaje korisnik kada nije selektovan.

en: email address
bs: email adresa

en: enabled route to %s
bs: Uključena ruta ka %s

en: error: tag mismatch ( %1$s != %2$s ) in '%3$s'%4$s
bs: greška: razlikovanje tagova ( %1$s != %2$s ) u '%3$s'%4$s

en: expired
bs: isteklo

en: external
bs: eksterno

en: external - signature pending
bs: vanjski - čekanje na potvrdu

en: failed
bs: nije uspojelo

en: failed!
bs: Greška!

en: fclose %s failed
bs: fclose %s nije uspio

en: filter_generate_port: %1$s is not a valid %2$s port.
bs: filter_generate_port: %1$s nije validan %2$s port.

en: follow
bs: prati

en: forwarding
bs: prosljeđivanje

en: fwrite %s failed
bs: fwrite %s nije uspio

en: gateway group
bs: Gateway grupa

en: gateway is disabled, cannot enable route to %s
bs: gejtvej je isključen, nemoguće uključiti rutu ka %s

en: gif remote address
bs: gif udaljena adresa

en: gif tunnel local address
bs: gif tunnel lokalna adresa

en: gif tunnel remote address
bs: gif tunnel udaljena adresa

en: gif tunnel remote netmask
bs: gif tunnel udaljena netmaska

en: id.server and hostname.bind queries are refused
bs: id.server i hostname.bind upiti su odbijeni

en: in
bs: u

en: in RAM
bs: u RAM

en: in use
bs: u korištenu

en: in use
bs: Koristi se

en: in view
bs: u pregledu

en: in view
bs: u pogledu

en: interface_qinq2_configure called with if undefined.%s
bs: interface_qinq2_configure pozvan sa nedefinisanim if. %s

en: interface_qinq_configure called with if undefined.%s
bs: interface_qinq_configure je pozvan sa nedefinisanim if. %s

en: interface_qinq_configure called with invalid if.%s
bs: interface_qinq_configure pozvan sa neispravnim if. %s

en: interface_vlan_configure called with if undefined.
bs: interface_vlan_configure pozvan sa nedefinisanim if.

en: interfaces_bring_up() was called but no variable defined.
bs: interfaces_bring_up() je pozvan ali varijabla nije definisana.

en: invalid input
bs: pogrešan unos

en: is available.
bs: je dostupna.

en: learning
bs: učenje

en: level
bs: nivo

en: limiters
bs: limiteri

en: linkshare d value needs to be numeric
bs: linkshare d vrijednost mora biti numerička

en: linkshare m1 value needs to be Kb, Mb, Gb, or %
bs: linkshare m1 vrijednost mora biti Kb, Mb, Gb, ili %

en: linkshare m2 value needs to be Kb, Mb, Gb, or %
bs: linkshare m2 vrijednost mora biti Kb, Mb, Gb, ili %

en: linkshare service curve defined but missing (d) value
bs: linkshare servisna kriva definisana ali nedostaje (d) vrijednost

en: linkshare service curve defined but missing initial bandwidth (m1) value
bs: linkshare servisna kriva definisana ali nedostaje inicijalna protočna (m1) vrijednost

en: list_phpfiles: unable to examine path %s
bs: list_phpfiles: nije moguće ispitati put %s

en: listing only first 10k items
bs: izlistavanje prvih 10k elemenata

en: long
bs: dugo

en: m0n0wall is Copyright &copy; 2002-2015 by Manuel Kasper (mk@neon1.net). All rights reserved.
bs: m0n0wall je zaštićen &copy; 2002-2015 Manuel Kasper (mk@neon1.net). Sva prava zadržana.

en: million
bs: milion

en: minutes
bs: minute

en: modified '%s' monitor:
bs: modifikovan '%s' monitor:

en: modified '%s' vs:
bs: modifikovan '%s' vs:

en: mtrace messages
bs: mtrace poruke

en: net30 -- Isolated /30 network per client
bs: net30 -- Izolirana /30 mreža po klijentu

en: network
bs: mreža

en: nginx with LUA
bs: nginx sa LUA

en: no info
bs: Bez informacija

en: none
bs: nijedan

en: off
bs: isključen

en: openvpn_resync_gwgroup called with null gwgroup parameter.
bs: openvpn_resync_gwgroup pozvan sa null gwgroup parametrom.

en: out
bs: van

en: out of
bs: izvan

en: overwrite!
bs: pisanje preko!

en: pfSense Book
bs: pfSense knjiga

en: pfSense Default
bs: pfSense zadano

en: pfSync Nodes
bs: pfSync Čvorovi

en: pfSync nodes
bs: pfSync čvorovi

en: pfTop Configuration
bs: pfTop Konfiguracija

en: pfsync Synchronize Peer IP
bs: pfsync Sinhroniziraj Peer IP

en: pfsync Synchronize Peer IP must be an IPv4 IP.
bs: pfsync Peer IP sinhronizacije mora biti IPv4 IP.

en: pfsync done in %s seconds.
bs: pfsync dovršen za %s sekundi.

en: pfsync transfers state insertion, update, and deletion messages between firewalls.
bs: pfsync prenosi unos stanja, ažuriranje i brisanje poruka između firewalla.

en: phase2 for %s
bs: phase2 za %s

en: phpDynDNS: ERROR while updating IP Address (A) for %1$s (%2$s)
bs: phpDynDNS: Greška prilikom ažuriranja IP Adrese (A) za %1$s (%2$s)

en: phpDynDNS: ERROR while updating IP Address (AAAA) for %1$s (%2$s)
bs: phpDynDNS: Greška prilikom ažuriranja IP Adrese (AAAA) za %1$s (%2$s)

en: phpDynDNS: Not updating %s A record because the IP address has not changed.
bs: phpDynDNS: Ne ažuriram %s A stavku jer IP adresa nije promijenjena.

en: phpDynDNS: Not updating %s AAAA record because the IPv6 address has not changed.
bs: phpDynDNS: Ne ažuriram %s AAAA stavku jer IPv6 adresa nije promijenjena.

en: phpDynDNS: updating cache file %1$s: %2$s
bs: phpDynDNS: Ažuriram keš fajl %1$s: %2$s

en: private key only
bs: privatni ključ samo

en: queue
bs: red

en: queues
bs: redovi

en: rd6 %1$s with ipv6 address %2$s based on %3$s ipv4 %4$s
bs: rd6 %1$s sa ipv6 adresom %2$s baziran na %3$s ipv4 %4$s

en: ready
bs: spremno

en: realif not defined in interfaces bridge - up
bs: realif nije definisan u interfaceovom prelazu - gore

en: realtime d value needs to be numeric
bs: realtime d vrijednost mora biti numerička

en: realtime m1 value needs to be Kb, Mb, Gb, or %
bs: realtime m1 vrijednost mora biti Kb, Mb, Gb, ili %

en: realtime m2 value needs to be Kb, Mb, Gb, or %
bs: realtime m2 vrijednost mora biti Kb, Mb, Gb, ili %

en: realtime service curve defined but missing (d) value
bs: realtime servisna kriva definisana ali nedostaje (d) vrijednost

en: realtime service curve defined but missing initial bandwidth (m1) value
bs: realtime servisna kriva definisana ali nedostaje inicijalna protočna (m1) vrijednost

en: released
bs: pušteno

en: reload_interfaces_sync() is starting.
bs: reload_interfaces_sync() je započet.

en: removed gateway group %s
bs: uklonjena gateway grupa %s

en: removed route to %s
bs: uklonjena ruta ka %s

en: removed route to%s
bs: Uklonjena ruta ka%s

en: reserved
bs: rezervisano

en: rrdtool restore -f '%1$s' '%2$s' failed returning %3$s.
bs: rrdtool restore -f '%1$s' '%2$s' nije uspio vraćajući %3$s.

en: rules
bs: pravila

en: running
bs: pokrenut

en: save
bs: spasi

en: schedule
bs: raspored

en: search the %1$sSystem Log%2$s for CARP demotion-related events.
bs: pretraži %1$sSistemski log %2$s za CARP demotion-related događaje.

en: section
bs: sekcija

en: secure shell configuration has changed. Restarting sshd.
bs: Sigurna shell konfiguracija je promijenjena. Restartujem sshd.

en: secure shell configuration has changed. Stopping sshd.
bs: sigurna shell konfiguracija je promijenjena. Zaustavljam sshd.

en: self-signed
bs: sam-potpisao

en: set
bs: postavi

en: setsockopt() failed, error: %s
bs: setsockopt() nije uspio, greška %

en: sixto4 %1$s with ipv6 address %2$s based on %3$s ipv4 %4$s
bs: sixto4 %1$s sa ip adresom %2$s bazirana na %3$s ipv4 %4$s

en: size
bs: veličina

en: speed
bs: brzina

en: state
bs: stanje

en: static
bs: statička

en: static route
bs: statička ruta

en: sync unbound done.
bs: završena sinhronizacija nepovezanih.

en: system
bs: sistem

en: time
bs: vrijeme

en: traffic is blocked
bs: Promet je blokiran

en: traffic is logged
bs: promet je prijavljen

en: traffic is matched
bs: Promet je nađen

en: traffic is passed
bs: Promet je proslijeđen

en: traffic is rejected
bs: Promet je odbijen

en: unable to read %s
bs: Nije moguće pročitati %s

en: unknown reason
bs: nepoznat razlog

en: up
bs: radi

en: upperlimit d value needs to be numeric
bs: upperlimit d vrijednost mora biti numerička

en: upperlimit m1 value needs to be Kb, Mb, Gb, or %
bs: upperlimit m1 vrijednost mora biti Kb, Mb, Gb, ili %

en: upperlimit m2 value needs to be Kb, Mb, Gb, or %
bs: upperlimit m2 vrijednost mora biti Kb, Mb, Gb, ili %

en: upperlimit service curve defined but missing (d) value
bs: upperlimit servisna kriva je definisana ali joj nedostaje (d) vrijednost

en: upperlimit service curve defined but missing initial bandwidth (m1) value
bs: upperlimit servisna kriva je definisana ali joj nedostaje inicijalna protočna (m1) vrijednost

en: used
bs: korišteno

en: version.server and version.bind queries are refused
bs: version.server i version.bind upiti su odbijeni

en: waiting for pfsync...
bs: čekam na pfsync...

en: warning: tag %1$s has invalid data in '%2$s'%3$s
bs: upozorenje: tag %1$s ima nepravilne podatke u '%2$s'%3$s

en: warning: tag %1$s has malformed data in '%2$s'%3$s
bs: upozorenje: tag %1$s ima neispravne podatke u '%2$s'%3$s

en: warning: tag %1$s has no data in '%2$s'%3$s
bs: upozorenje: tag %1$s nema podataka u '%2$s'%3$s

en: webConfigurator Lockout Table
bs: webConfigurator Lockout Tablica

en: webConfigurator admin password will be reset to '%s'
bs: webConfigurator admin lozinka će biti vraćena na '%s'

en: webConfigurator admin username will be reset to 'admin'
bs: webConfigurator korisničko ime admin će biti vraćeno na 'admin'

en: webConfigurator configuration has changed. Restarting webConfigurator.
bs: webConfigurator konfiguracija je promijenjena. Restartam webConfigurator.

en: webConfigurator default (%s)
bs: webConfigurator zadano (%s)
