# # $FreeBSD: stable/10/etc/etc.amd64/ttys 267236 2014-06-08 17:50:07Z nwhitehorn $ # @(#)ttys 5.1 (Berkeley) 4/17/89 # # This file specifies various information about terminals on the system. # It is used by several different programs. Common entries for the # various columns include: # # name The name of the terminal device. # # getty The program to start running on the terminal. Typically a # getty program, as the name implies. Other common entries # include none, when no getty is needed, and xdm, to start the # X Window System. # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. # For virtual consoles, the correct type is typically xterm. # Other common values include dialup for incoming modem ports, and # unknown when the terminal type cannot be predetermined. # # status Must be on or off. If on, init will run the getty program on # the specified port. If the word "secure" appears, this tty # allows root login. # # name getty type status comments # # If console is marked "insecure", then init will ask for the root password # when going to single-user mode. console none unknown off secure # ttyv0 "/usr/libexec/getty al.Pc" cons25 on secure # Virtual terminals ttyv1 "/usr/libexec/getty Pc" xterm off secure ttyv2 "/usr/libexec/getty Pc" xterm off secure ttyv3 "/usr/libexec/getty Pc" xterm off secure ttyv4 "/usr/libexec/getty Pc" xterm off secure ttyv5 "/usr/libexec/getty Pc" xterm off secure ttyv6 "/usr/libexec/getty Pc" xterm off secure ttyv7 "/usr/libexec/getty Pc" xterm off secure ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ttyu0 "/usr/libexec/getty al.115200" cons25 onifconsole secure ttyu1 "/usr/libexec/getty al.115200" cons25 onifconsole secure ttyu2 "/usr/libexec/getty al.115200" cons25 onifconsole secure ttyu3 "/usr/libexec/getty al.115200" cons25 onifconsole secure # Dumb console dcons "/usr/libexec/getty std.9600" vt100 off secure