# # $FreeBSD: src/etc/etc.i386/ttys,v 1.10 2003/10/24 15:44:08 simokawa Exp $ # @(#)ttys 5.1 (Berkeley) 4/17/89 # # This file specifies various information about terminals on the system. # It is used by several different programs. Common entries for the # various columns include: # # name The name of the terminal device. # # getty The program to start running on the terminal. Typically a # getty program, as the name implies. Other common entries # include none, when no getty is needed, and xdm, to start the # X Window System. # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. # For virtual consoles, the correct type is typically cons25, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on # pseudo-terminals, dialup for incoming modem ports, and unknown # when the terminal type cannot be predetermined. # # status Must be on or off. If on, init will run the getty program on # the specified port. If the word "secure" appears, this tty # allows root login. # # name getty type status comments # # If console is marked "insecure", then init will ask for the root password # when going to single-user mode. console "/usr/libexec/getty Pc" cons25 on secure # #ttyv0 "/usr/libexec/getty Pc" cons25 off secure