From 46bc6e545a17e77202aaf01ec0cd8d5a46567525 Mon Sep 17 00:00:00 2001 From: Renato Botelho Date: Tue, 25 Aug 2015 08:08:24 -0300 Subject: Move main pfSense content to src/ --- src/etc/gettytab | 235 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 src/etc/gettytab (limited to 'src/etc/gettytab') diff --git a/src/etc/gettytab b/src/etc/gettytab new file mode 100644 index 0000000..5af5aae --- /dev/null +++ b/src/etc/gettytab @@ -0,0 +1,235 @@ +# $FreeBSD: stable/10/etc/gettytab 241708 2012-10-18 22:20:02Z peterj $ +# from: @(#)gettytab 5.14 (Berkeley) 3/27/91 +# +# Most of the table entries here are just copies of the old getty table, +# it is by no means certain, or even likely, that any of them are optimal +# for any purpose whatever. Nor is it likely that more than a couple are +# even correct. +# +# The default gettytab entry, used to set defaults for all other +# entries, and in cases where getty is called with no table name. +# +# cb, ce and ck are desirable on most crt's. The non-crt entries need to +# be changed to turn them off (:cb@:ce@:ck@:). +# +# lc should always be on; it's a remainder of some stone age when there +# have been terminals around not being able of handling lower-case +# characters. Those terminals aren't supported any longer, but getty is +# `smart' about them by default. +# +# Parity defaults to even, but the Pc entry and all the `std' entries +# specify no parity. The different parities are: +# (none): same as ep for getty. login will use terminal as is. +# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and +# fake parity. login will use even parity (cs7 parenb -parodd). +# op: same as ep except odd parity (cs7 parenb parodd) for login. +# getty will fake odd parity as well. +# ap: same as ep except -inpck instead of inpck for login. +# ap overrides op and ep. +# np: 1. don't fake parity in getty. The fake parity garbles +# characters on non-terminals (like pccons) that don't +# support parity. It would probably better for getty not to +# try to fake parity. It could just use cbreak mode so as +# not to force cs8 and let the hardware handle the parity. +# login has to be rely on the hardware anyway. +# 2. set cs8 -parenb -istrip -inpck. +# ep:op: same as ap. +# +default:\ + :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\ + :if=/etc/issue: + +# +# Fixed speed entries +# +# The "std.NNN" names are known to the special case +# portselector code in getty, however they can +# be assigned to any table desired. +# The "NNN-baud" names are known to the special case +# autobaud code in getty, and likewise can +# be assigned to any table desired (hopefully the same speed). +# +a|std.110|110-baud:\ + :np:nd#1:cd#1:uc:sp#110: +b|std.134|134.5-baud:\ + :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl: +1|std.150|150-baud:\ + :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 : +c|std.300|300-baud:\ + :np:nd#1:cd#1:sp#300: +d|std.600|600-baud:\ + :np:nd#1:cd#1:sp#600: +f|std.1200|1200-baud:\ + :np:fd#1:sp#1200: +6|std.2400|2400-baud:\ + :np:sp#2400: +7|std.4800|4800-baud:\ + :np:sp#4800: +2|std.9600|9600-baud:\ + :np:sp#9600: +g|std.19200|19200-baud:\ + :np:sp#19200: +std.38400|38400-baud:\ + :np:sp#38400: +std.57600|57600-baud:\ + :np:sp#57600: +std.115200|115200-baud:\ + :np:sp#115200: +std.230400|230400-baud:\ + :np:sp#230400: + +# +# Entry specifying explicit device settings. See termios(4) and +# /usr/include/termios.h, too. The entry forces the tty into +# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control. +# +# cflags: CLOCAL | HUPCL | CREAD | CS8 +# oflags: OPOST | ONLCR | OXTABS +# iflags: IXOFF | IXON | ICRNL | IGNPAR +# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE +# +# The `0' flags don't have input enabled. The `1' flags don't echo. +# (Echoing is done inside getty itself.) +# +local.9600|CLOCAL tty @ 9600 Bd:\ + :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\ + :o0#0x00000007:o1#0x00000002:o2#0x00000007:\ + :i0#0x00000704:i1#0x00000000:i2#0x00000704:\ + :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\ + :sp#9600:np: + +# +# Dial in rotary tables, speed selection via 'break' +# +0|d300|Dial-300:\ + :nx=d1200:cd#2:sp#300: +d1200|Dial-1200:\ + :nx=d150:fd#1:sp#1200: +d150|Dial-150:\ + :nx=d110:lm@:tc=150-baud: +d110|Dial-110:\ + :nx=d300:tc=300-baud: + +# +# Fast dialup terminals, 2400/1200/300 rotary (can start either way) +# +D2400|d2400|Fast-Dial-2400:\ + :nx=D1200:tc=2400-baud: +3|D1200|Fast-Dial-1200:\ + :nx=D300:tc=1200-baud: +5|D300|Fast-Dial-300:\ + :nx=D2400:tc=300-baud: + +# +#telebit (19200) +# +t19200:\ + :nx=t2400:tc=19200-baud: +t2400:\ + :nx=t1200:tc=2400-baud: +t1200:\ + :nx=t19200:tc=1200-baud: + +# +#telebit (9600) +# +t9600:\ + :nx=t2400a:tc=9600-baud: +t2400a:\ + :nx=t1200a:tc=2400-baud: +t1200a:\ + :nx=t9600:tc=1200-baud: + +# +# Odd special case terminals +# +-|tty33|asr33|Pity the poor user of this beast:\ + :tc=110-baud: + +4|Console|Console Decwriter II:\ + :nd@:cd@:rw:tc=300-baud: + +e|Console-1200|Console Decwriter III:\ + :fd@:nd@:cd@:rw:tc=1200-baud: + +i|Interdata console:\ + :uc:sp#0: + +l|lsi chess terminal:\ + :sp#300: + +X|Xwindow|X window system:\ + :fd@:nd@:cd@:rw:sp#9600: + +P|Pc|Pc console:\ + :ht:np:sp#9600: + +al.Pc:\ + :ht:np:sp#9600:al=root: + +# Weirdo special case for fast crt's with hardcopy devices +# +8|T9600|CRT with hardcopy:\ + :nx=T300:tc=9600-baud: +9|T300|CRT with hardcopy (300):\ + :nx=T9600:tc=300-baud: + +# +# Plugboard, and misc other terminals +# +plug-9600|Plugboard-9600:\ + :pf#1:tc=9600-baud: +p|P9600|Plugboard-9600-rotary:\ + :pf#1:nx=P300:tc=9600-baud: +q|P300|Plugboard-300:\ + :pf#1:nx=P1200:tc=300-baud: +r|P1200|Plugboard-1200:\ + :pf#1:nx=P9600:tc=1200-baud: + +# +# XXXX Port selector +# +s|DSW|Port Selector:\ + :ps:sp#2400: + +# +# Auto-baud speed detect entry for Micom 600. +# Special code in getty will switch this out +# to one of the NNN-baud entries. +# +A|Auto-baud:\ + :ab:sp#2400:f0#040: + +# +# autologin - automatically log in as root +# + +autologin|al.9600:\ + :al=root:tc=std.9600: +al.19200:\ + :al=root:tc=std.19200: +al.38400:\ + :al=root:tc=std.38400: +al.57600:\ + :al=root:tc=std.57600: +al.115200:\ + :al=root:tc=std.115200: +al.230400:\ + :al=root:tc=std.230400: + +# +# Entries for 3-wire serial terminals. These don't supply carrier, so +# clocal needs to be set, and crtscts needs to be unset. +# +3wire.9600|9600-3wire:\ + :np:nc:sp#9600: +3wire.19200|19200-3wire:\ + :np:nc:sp#19200: +3wire.38400|38400-3wire:\ + :np:nc:sp#38400: +3wire.57600|57600-3wire:\ + :np:nc:sp#57600: +3wire.115200|115200-3wire:\ + :np:nc:sp#115200: +3wire.230400|230400-3wire:\ + :np:nc:sp#230400: -- cgit v1.1