From 76231e63981ca201ca73b138d17316f11c8d3448 Mon Sep 17 00:00:00 2001
From: Ermal <eri@pfsense.org>
Date: Thu, 7 Jun 2012 09:25:27 +0000
Subject: Bye, bye olsrd back to packages.

---
 etc/inc/services.inc | 289 +--------------------------------------------------
 etc/rc.bootup        |   3 -
 2 files changed, 1 insertion(+), 291 deletions(-)

(limited to 'etc')

diff --git a/etc/inc/services.inc b/etc/inc/services.inc
index 08430c1..f1edc3e 100644
--- a/etc/inc/services.inc
+++ b/etc/inc/services.inc
@@ -34,7 +34,7 @@
 /*
 	pfSense_BUILDER_BINARIES:	/usr/bin/killall	/bin/pgrep	/bin/sh	/usr/local/sbin/dhcpd	/usr/local/sbin/igmpproxy
 	pfSense_BUILDER_BINARIES:	/sbin/ifconfig	/usr/sbin/arp	/sbin/ifconfig	/usr/local/sbin/dnsmasq
-	pfSense_BUILDER_BINARIES:	/usr/sbin/bsnmpd	/sbin/route	/usr/local/sbin/olsrd
+	pfSense_BUILDER_BINARIES:	/usr/sbin/bsnmpd	/sbin/route
 	pfSense_BUILDER_BINARIES:	/usr/local/sbin/miniupnpd	/usr/sbin/radvd		/usr/local/sbin/unbound
 	pfSense_BUILDER_BINARIES:	/usr/local/sbin/dhcleases6
 	pfSense_MODULE:	utils
@@ -1757,293 +1757,6 @@ EOD;
 	return 0;
 }
 
-function setup_wireless_olsr() {
-	global $config, $g;
-	if ($g['platform'] == 'jail' || !$config['installedpackages']['olsrd'] || !$config['installedpackages'])
-		return;
-	if(isset($config['system']['developerspew'])) {
-		$mt = microtime();
-		echo "setup_wireless_olsr($interface) being called $mt\n";
-	}
-	conf_mount_rw();
-	foreach($config['installedpackages']['olsrd']['config'] as $olsrd) {
-		$olsr_enable = $olsrd['enable'];
-		if($olsr_enable <> "on") {
-			if (is_process_running("olsrd"))
-				mwexec("/usr/bin/killall olsrd", true);
-			return;
-		}
-		$fd = fopen("{$g['varetc_path']}/olsr.conf", "w");
-
-		if($olsrd['announcedynamicroute'] or $olsrd['enableannounce'] == "on") {
-			$enableannounce .= "\nHna4\n";
-			$enableannounce .= "{\n";
-		if($olsrd['announcedynamicroute'])
-			$enableannounce .= "\t{$olsrd['announcedynamicroute']}\n";
-		if($olsrd['enableannounce'] == "on")
-			$enableannounce .= "0.0.0.0 0.0.0.0";
-			$enableannounce .= "\n}\n";
-		} else {
-			$enableannounce = "";
-		}
-
-		$olsr .= <<<EODA
-#
-# olsr.org OLSR daemon config file
-#
-# Lines starting with a # are discarded
-#
-# This file was generated by setup_wireless_olsr() in services.inc
-#
-
-# This file is an example of a typical
-# configuration for a mostly static
-# network(regarding mobility) using
-# the LQ extention
-
-# Debug level(0-9)
-# If set to 0 the daemon runs in the background
-
-DebugLevel	2
-
-# IP version to use (4 or 6)
-
-IpVersion	4
-
-# Clear the screen each time the internal state changes
-
-ClearScreen     yes
-
-{$enableannounce}
-
-# Should olsrd keep on running even if there are
-# no interfaces available? This is a good idea
-# for a PCMCIA/USB hotswap environment.
-# "yes" OR "no"
-
-AllowNoInt	yes
-
-# TOS(type of service) value for
-# the IP header of control traffic.
-# If not set it will default to 16
-
-#TosValue	16
-
-# The fixed willingness to use(0-7)
-# If not set willingness will be calculated
-# dynamically based on battery/power status
-# if such information is available
-
-#Willingness    	4
-
-# Allow processes like the GUI front-end
-# to connect to the daemon.
-
-IpcConnect
-{
-     # Determines how many simultaneously
-     # IPC connections that will be allowed
-     # Setting this to 0 disables IPC
-
-     MaxConnections  0
-
-     # By default only 127.0.0.1 is allowed
-     # to connect. Here allowed hosts can
-     # be added
-
-     Host            127.0.0.1
-     #Host            10.0.0.5
-
-     # You can also specify entire net-ranges
-     # that are allowed to connect. Multiple
-     # entries are allowed
-
-     #Net             192.168.1.0 255.255.255.0
-}
-
-# Wether to use hysteresis or not
-# Hysteresis adds more robustness to the
-# link sensing but delays neighbor registration.
-# Used by default. 'yes' or 'no'
-
-UseHysteresis	no
-
-# Hysteresis parameters
-# Do not alter these unless you know
-# what you are doing!
-# Set to auto by default. Allowed
-# values are floating point values
-# in the interval 0,1
-# THR_LOW must always be lower than
-# THR_HIGH.
-
-#HystScaling	0.50
-#HystThrHigh	0.80
-#HystThrLow	0.30
-
-
-# Link quality level
-# 0 = do not use link quality
-# 1 = use link quality for MPR selection
-# 2 = use link quality for MPR selection and routing
-# Defaults to 0
-
-LinkQualityLevel	{$olsrd['enablelqe']}
-
-# Link quality window size
-# Defaults to 10
-
-LinkQualityWinSize	10
-
-# Polling rate in seconds(float).
-# Default value 0.05 sec
-
-Pollrate	0.05
-
-
-# TC redundancy
-# Specifies how much neighbor info should
-# be sent in TC messages
-# Possible values are:
-# 0 - only send MPR selectors
-# 1 - send MPR selectors and MPRs
-# 2 - send all neighbors
-#
-# defaults to 0
-
-TcRedundancy	2
-
-#
-# MPR coverage
-# Specifies how many MPRs a node should
-# try select to reach every 2 hop neighbor
-#
-# Can be set to any integer >0
-#
-# defaults to 1
-
-MprCoverage	3
-
-# Example plugin entry with parameters:
-
-EODA;
-
-if($olsrd['enablehttpinfo'] == "on") {
-	$olsr .= <<<EODB
-
-LoadPlugin "/usr/local/lib/olsrd_httpinfo.so.0.1"
-{
-    PlParam     "port"   "{$olsrd['port']}"
-    PlParam     "Net"    "{$olsrd['allowedhttpinfohost']} {$olsrd['allowedhttpinfosubnet']}"
-}
-
-EODB;
-
-}
-
-if($olsrd['enabledsecure'] == "on") {
-	$olsr .= <<<EODC
-
-LoadPlugin "/usr/local/lib/olsrd_secure.so.0.5"
-{
-    PlParam     "Keyfile"   "/usr/local/etc/olsrkey.txt"
-}
-
-EODC;
-
-}
-
-if($olsrd['enabledyngw'] == "on") {
-
-	/* unset default route, olsr auto negotiates */
-	mwexec("/sbin/route delete default");
-
-	$olsr .= <<<EODE
-
-LoadPlugin "/usr/local/lib/olsrd_dyn_gw.so.0.4"
-{
-    # how often to look for a inet gw, in seconds
-    # defaults to 5 secs, if commented out
-    PlParam     "Interval"   "{$olsrd['polling']}"
-
-    # if one or more IPv4 addresses are given, do a ping on these in
-    # descending order to validate that there is not only an entry in
-    # routing table, but also a real internet connection. If any of
-    # these addresses could be pinged successfully, the test was
-    # succesful, i.e. if the ping on the 1st address was successful,the
-    # 2nd won't be pinged
-    PlParam     "Ping"       "{$olsrd['ping']}"
-    #PlParam     "HNA"   "192.168.81.0 255.255.255.0"
-}
-
-EODE;
-
-}
-
-foreach($config['installedpackages']['olsrd']['config'] as $conf) {
-	$interfaces = explode(',', $conf['iface_array']);
-	foreach($interfaces as $interface) {
-		$realinterface = convert_friendly_interface_to_real_interface_name($interface);
-$olsr .= <<<EODAD
-Interface "{$realinterface}"
-{
-
-    # Hello interval in seconds(float)
-    HelloInterval    2.0
-
-    # HELLO validity time
-    HelloValidityTime	20.0
-
-    # TC interval in seconds(float)
-    TcInterval        5.0
-
-    # TC validity time
-    TcValidityTime	30.0
-
-    # MID interval in seconds(float)
-    MidInterval	5.0
-
-    # MID validity time
-    MidValidityTime	30.0
-
-    # HNA interval in seconds(float)
-    HnaInterval	5.0
-
-    # HNA validity time
-    HnaValidityTime 	30.0
-
-    # When multiple links exist between hosts
-    # the weight of interface is used to determine
-    # the link to use. Normally the weight is
-    # automatically calculated by olsrd based
-    # on the characteristics of the interface,
-    # but here you can specify a fixed value.
-    # Olsrd will choose links with the lowest value.
-
-    # Weight 0
-
-
-}
-
-EODAD;
-
-	}
-	break;
-}
-		fwrite($fd, $olsr);
-		fclose($fd);
-	}
-
-	if (is_process_running("olsrd"))
-		mwexec("/usr/bin/killall olsrd", true);
-
-	sleep(2);
-
-	mwexec_bg("/usr/local/sbin/olsrd -f {$g['varetc_path']}/olsr.conf");
-
-	conf_mount_ro();
-}
-
 /* configure cron service */
 function configure_cron() {
 	global $g, $config;
diff --git a/etc/rc.bootup b/etc/rc.bootup
index 3b14cb1..8b78866 100755
--- a/etc/rc.bootup
+++ b/etc/rc.bootup
@@ -364,9 +364,6 @@ auto_login();
 /* load graphing functions */
 enable_rrd_graphing();
 
-/* startup OLSR if needed */
-setup_wireless_olsr();
-
 /* startup routed if needed */
 include_once("/usr/local/pkg/routed.inc");
 setup_routed();
-- 
cgit v1.1