1 files changed, 136 insertions, 0 deletions
diff --git a/usr/sbin/pc-sysinstall/backend/startautoinstall.sh b/usr/sbin/pc-sysinstall/backend/startautoinstall.sh
new file mode 100644
index 0000000..153d449
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/backend/startautoinstall.sh
@@ -0,0 +1,136 @@
+#!/bin/sh
+#-
+# Copyright (c) 2010 iXsystems, Inc.  All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+# Script which reads the pc-autoinstall.conf directive, and begins the install
+#
+# $FreeBSD: src/usr.sbin/pc-sysinstall/backend/startautoinstall.sh,v 1.2 2010/06/27 16:46:11 imp Exp $
+
+# Source our functions scripts
+. ${BACKEND}/functions.sh
+. ${BACKEND}/functions-networking.sh
+. ${BACKEND}/functions-parse.sh
+
+# Check that the config file exists
+if [ ! -e "${1}" ]
+then
+  echo "ERROR: Install configuration $1 does not exist!"
+  exit 1
+fi
+
+# Set our config file variable
+CONF=${1}
+INSTALL_CFG="/tmp/pc-sysinstall.cfg"
+
+# Check if the config file is on disk as well
+PCCFG=`grep "pc_config:" ${CONF} | grep -v "^#" | sed "s|pc_config: ||g" | sed "s|pc_config:||g"`
+SHUTDOWN_CMD=`grep "shutdown_cmd:" ${CONF} | grep -v "^#" | sed "s|shutdown_cmd: ||g" | sed "s|shutdown_cmd:||g"`
+CONFIRM_INS=`grep "confirm_install:" ${CONF} | grep -v "^#" | sed "s|confirm_install: ||g" | sed "s|confirm_install:||g"`
+
+# Check that this isn't a http / ftp file we need to fetch later
+echo "${PCCFG}" | grep -e "^http" -e "^ftp" > /dev/null 2>/dev/null
+if [ "$?" != "0" ]
+then
+  # Copy over the install cfg file, if not done already
+  if [ ! -e "${INSTALL_CFG}" ]
+  then
+    cp ${PCCFG} ${INSTALL_CFG}
+  fi
+  # Make sure we have the file which was copied into /tmp previously
+  if [ ! -e "${INSTALL_CFG}" ]
+  then
+    echo "Error: ${INSTALL_CFG} is missing! Exiting in 10 seconds..."
+    sleep 10
+    exit 150
+  fi
+else
+  # We need to fetch a remote file, check and set any nic options before doing so
+  NICCFG=`grep "nic_config:" ${CONF} | grep -v "^#" | sed "s|nic_config: ||g" | sed "s|nic_config:||g"`
+  if [ "${NICCFG}" = "dhcp-all" -o "${NICCFG}" = "DHCP-ALL" ]
+  then
+    # Try to auto-enable dhcp on any nics we find
+    enable_auto_dhcp
+  else
+    echo "Running command \"ifconfig ${NICCFG}\""
+    ifconfig ${NICCFG}
+    WRKNIC="`echo ${NICCFG} | cut -d ' ' -f 1`"
+    NICDNS=`grep "nic_dns:" ${CONF} | grep -v "^#" | sed "s|nic_dns: ||g" | sed "s|nic_dns:||g"`
+    NICGATE=`grep "nic_gateway:" ${CONF} | grep -v "^#" | sed "s|nic_gateway: ||g" | sed "s|nic_gateway:||g"`
+
+    echo "nameserver ${NICDNS}" >/etc/resolv.conf
+
+    echo "Running command \"route add default ${NICGATE}\""
+    route add default ${NICGATE}
+  fi
+
+  get_nic_mac "$WRKNIC"
+  nic_mac="${FOUNDMAC}"
+
+  PCCFG=`echo ${PCCFG} | sed "s|%%NIC_MAC%%|${nic_mac}|g"`
+
+  # Now try to fetch the remove file
+  echo "Fetching cfg with: \"fetch -o ${INSTALL_CFG} ${PCCFG}\""
+  fetch -o "${INSTALL_CFG}" "${PCCFG}"
+  if [ "$?" != "0" ]
+  then
+    echo "ERROR: Failed to fetch ${PCCFG}, install aborted"
+    exit 150
+  fi
+
+fi
+
+# If we end up with a valid config, lets proccede
+if [ -e "${INSTALL_CFG}" ]
+then
+  
+  if [ "${CONFIRM_INS}" != "no" -a "${CONFIRM_INS}" != "NO" ]
+  then
+    echo "Type in 'install' to begin automated installation. Warning: Data on target disks may be destroyed!"
+    read tmp
+    case $tmp in
+       install|INSTALL) ;;
+       *) echo "Install canceled!" ; exit 150 ;;
+    esac
+  fi
+
+  ${PROGDIR}/pc-sysinstall -c ${INSTALL_CFG}
+  if [ "$?" = "0" ]
+  then
+    if [ ! -z "$SHUTDOWN_CMD" ]
+    then
+      ${SHUTDOWN_CMD}
+    else 
+      echo "SUCCESS: Installation finished! Press ENTER to reboot." 
+      read tmp
+      shutdown -r now
+    fi
+  else 
+    echo "ERROR: Installation failed, press ENTER to drop to shell."
+    read tmp
+    /bin/csh
+  fi
+else
+  echo "ERROR: Failed to get /tmp/pc-sysinstall.cfg for automated install..."
+  exit 150
+fi