diff options
Diffstat (limited to 'usr/sbin/pc-sysinstall/backend/functions-networking.sh')
| -rwxr-xr-x | usr/sbin/pc-sysinstall/backend/functions-networking.sh | 357 |
1 files changed, 0 insertions, 357 deletions
diff --git a/usr/sbin/pc-sysinstall/backend/functions-networking.sh b/usr/sbin/pc-sysinstall/backend/functions-networking.sh deleted file mode 100755 index fa0fa06..0000000 --- a/usr/sbin/pc-sysinstall/backend/functions-networking.sh +++ /dev/null @@ -1,357 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2010 iXsystems, Inc. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD: src/usr.sbin/pc-sysinstall/backend/functions-networking.sh,v 1.3 2010/08/24 06:11:46 imp Exp $ - -# Functions which perform our networking setup - -# Function which creates a kde4 .desktop file for the PC-BSD net tray -create_desktop_nettray() -{ - NIC="${1}" - echo "#!/usr/bin/env xdg-open -[Desktop Entry] -Exec=/usr/local/kde4/bin/pc-nettray ${NIC} -Icon=network -StartupNotify=false -Type=Application" > ${FSMNT}/usr/share/skel/.kde4/Autostart/tray-${NIC}.desktop - chmod 744 ${FSMNT}/usr/share/skel/.kde4/Autostart/tray-${NIC}.desktop - -}; - -# Function which checks is a nic is wifi or not -check_is_wifi() -{ - NIC="$1" - ifconfig ${NIC} | grep "802.11" >/dev/null 2>/dev/null - if [ "$?" = "0" ] - then - return 0 - else - return 1 - fi -}; - -# Function to get the first available wired nic, used for lagg0 setup -get_first_wired_nic() -{ - rm ${TMPDIR}/.niclist >/dev/null 2>/dev/null - # start by getting a list of nics on this system - ${QUERYDIR}/detect-nics.sh > ${TMPDIR}/.niclist - if [ -e "${TMPDIR}/.niclist" ] - then - while read line - do - NIC="`echo $line | cut -d ':' -f 1`" - check_is_wifi ${NIC} - if [ "$?" != "0" ] - then - VAL="${NIC}" ; export VAL - return - fi - done < ${TMPDIR}/.niclist - fi - - VAL="" ; export VAL - return -}; - -# Function which simply enables plain dhcp on all detected nics, not fancy lagg interface -enable_plain_dhcp_all() -{ - rm ${TMPDIR}/.niclist >/dev/null 2>/dev/null - # start by getting a list of nics on this system - ${QUERYDIR}/detect-nics.sh > ${TMPDIR}/.niclist - if [ -e "${TMPDIR}/.niclist" ] - then - echo "# Auto-Enabled NICs from pc-sysinstall" >>${FSMNT}/etc/rc.conf - WLANCOUNT="0" - while read line - do - NIC="`echo $line | cut -d ':' -f 1`" - DESC="`echo $line | cut -d ':' -f 2`" - echo_log "Setting $NIC to DHCP on the system." - check_is_wifi ${NIC} - if [ "$?" = "0" ] - then - # We have a wifi device, setup a wlan* entry for it - WLAN="wlan${WLANCOUNT}" - echo "wlans_${NIC}=\"${WLAN}\"" >>${FSMNT}/etc/rc.conf - echo "ifconfig_${WLAN}=\"DHCP\"" >>${FSMNT}/etc/rc.conf - CNIC="${WLAN}" - WLANCOUNT="`expr ${WLANCOUNT} + 1`" - else - echo "ifconfig_${NIC}=\"DHCP\"" >>${FSMNT}/etc/rc.conf - CNIC="${NIC}" - fi - - done < ${TMPDIR}/.niclist - fi -}; - -# Function which enables fancy lagg dhcp on specified wifi -enable_lagg_dhcp() -{ - WIFINIC="$1" - - # Get the first wired nic - get_first_wired_nic - WIRENIC=$VAL - LAGGPORT="laggport ${WIFINIC}" - - echo "# Auto-Enabled NICs from pc-sysinstall" >>${FSMNT}/etc/rc.conf - if [ ! -z "$WIRENIC" ] - then - echo "ifconfig_${WIRENIC}=\"up\"" >> ${FSMNT}/etc/rc.conf - echo "ifconfig_${WIFINIC}=\"\`ifconfig ${WIRENIC} ether\`\"" >> ${FSMNT}/etc/rc.conf - echo "ifconfig_${WIFINIC}=\"ether \${ifconfig_${WIFINIC}##*ether }\"" >> ${FSMNT}/etc/rc.conf - LAGGPORT="laggport ${WIRENIC} ${LAGGPORT}" - fi - - echo "wlans_${WIFINIC}=\"wlan0\"" >> ${FSMNT}/etc/rc.conf - echo "cloned_interfaces=\"lagg0\"" >> ${FSMNT}/etc/rc.conf - echo "ifconfig_lagg0=\"laggproto failover ${LAGGPORT} DHCP\"" >> ${FSMNT}/etc/rc.conf - -}; - -# Function which detects available nics, and runs them to DHCP on the -save_auto_dhcp() -{ - rm ${TMPDIR}/.niclist >/dev/null 2>/dev/null - # start by getting a list of nics on this system - ${QUERYDIR}/detect-nics.sh > ${TMPDIR}/.niclist - if [ -e "${TMPDIR}/.niclist" ] - then - while read line - do - NIC="`echo $line | cut -d ':' -f 1`" - DESC="`echo $line | cut -d ':' -f 2`" - check_is_wifi "${NIC}" - if [ "$?" = "0" ] - then - # We have a wifi device, lets do fancy lagg interface - enable_lagg_dhcp "${NIC}" - return - fi - - done < ${TMPDIR}/.niclist - fi - - # Got here, looks like no wifi, so lets simply enable plain-ole-dhcp - enable_plain_dhcp_all - -}; - - -# Function which saves a manual nic setup to the installed system -save_manual_nic() -{ - # Get the target nic - NIC="$1" - - get_value_from_cfg netSaveIP - NETIP="${VAL}" - - if [ "$NETIP" = "DHCP" ] - then - echo_log "Setting $NIC to DHCP on the system." - echo "ifconfig_${NIC}=\"DHCP\"" >>${FSMNT}/etc/rc.conf - return 0 - fi - - # If we get here, we have a manual setup, lets do so now - - # Set the manual IP - IFARGS="inet ${NETIP}" - - # Check if we have a netmask to set - get_value_from_cfg netSaveMask - NETMASK="${VAL}" - if [ ! -z "${NETMASK}" ] - then - IFARGS="${IFARGS} netmask ${NETMASK}" - fi - - - echo "# Auto-Enabled NICs from pc-sysinstall" >>${FSMNT}/etc/rc.conf - echo "ifconfig_${NIC}=\"${IFARGS}\"" >>${FSMNT}/etc/rc.conf - - # Check if we have a default router to set - get_value_from_cfg netSaveDefaultRouter - NETROUTE="${VAL}" - if [ ! -z "${NETROUTE}" ] - then - echo "defaultrouter=\"${NETROUTE}\"" >>${FSMNT}/etc/rc.conf - fi - - # Check if we have a nameserver to enable - get_value_from_cfg netSaveNameServer - NAMESERVER="${VAL}" - if [ ! -z "${NAMESERVER}" ] - then - echo "nameserver ${NAMESERVER}" >${FSMNT}/etc/resolv.conf - fi - -}; - -# Function which determines if a nic is active / up -is_nic_active() -{ - ifconfig ${1} | grep "status: active" >/dev/null 2>/dev/null - if [ "$?" = "0" ] ; then - return 0 - else - return 1 - fi -}; - - -# Function which detects available nics, and runs DHCP on them until -# a success is found -enable_auto_dhcp() -{ - # start by getting a list of nics on this system - ${QUERYDIR}/detect-nics.sh > ${TMPDIR}/.niclist - while read line - do - NIC="`echo $line | cut -d ':' -f 1`" - DESC="`echo $line | cut -d ':' -f 2`" - - is_nic_active "${NIC}" - if [ "$?" = "0" ] ; then - echo_log "Trying DHCP on $NIC $DESC" - dhclient ${NIC} >/dev/null 2>/dev/null - if [ "$?" = "0" ] ; then - # Got a valid DHCP IP, we can return now - WRKNIC="$NIC" ; export WRKNIC - return 0 - fi - fi - done < ${TMPDIR}/.niclist - -}; - -# Get the mac address of a target NIC -get_nic_mac() -{ - FOUNDMAC="`ifconfig ${1} | grep 'ether' | tr -d '\t' | cut -d ' ' -f 2`" - export FOUNDMAC -} - -# Function which performs the manual setup of a target nic in the cfg -enable_manual_nic() -{ - # Get the target nic - NIC="$1" - - # Check that this NIC exists - rc_halt "ifconfig ${NIC}" - - get_value_from_cfg netIP - NETIP="${VAL}" - - if [ "$NETIP" = "DHCP" ] - then - echo_log "Enabling DHCP on $NIC" - rc_halt "dhclient ${NIC}" - return 0 - fi - - # If we get here, we have a manual setup, lets do so now - - # Set the manual IP - rc_halt "ifconfig ${NIC} ${NETIP}" - - # Check if we have a netmask to set - get_value_from_cfg netMask - NETMASK="${VAL}" - if [ ! -z "${NETMASK}" ] - then - rc_halt "ifconfig ${NIC} netmask ${NETMASK}" - fi - - # Check if we have a default router to set - get_value_from_cfg netDefaultRouter - NETROUTE="${VAL}" - if [ ! -z "${NETROUTE}" ] - then - rc_halt "route add default ${NETROUTE}" - fi - - # Check if we have a nameserver to enable - get_value_from_cfg netNameServer - NAMESERVER="${VAL}" - if [ ! -z "${NAMESERVER}" ] - then - echo "nameserver ${NAMESERVER}" >/etc/resolv.conf - fi - - -}; - - -# Function which parses the cfg and enables networking per specified -start_networking() -{ - # Check if we have any networking requested - get_value_from_cfg netDev - if [ -z "${VAL}" ] - then - return 0 - fi - - NETDEV="${VAL}" - if [ "$NETDEV" = "AUTO-DHCP" ] - then - enable_auto_dhcp - else - enable_manual_nic ${NETDEV} - fi - -}; - - -# Function which checks the cfg and enables the specified networking on -# the installed system -save_networking_install() -{ - - # Check if we have any networking requested to save - get_value_from_cfg netSaveDev - if [ -z "${VAL}" ] - then - return 0 - fi - - NETDEV="${VAL}" - if [ "$NETDEV" = "AUTO-DHCP" ] - then - save_auto_dhcp - else - save_manual_nic ${NETDEV} - fi - -}; - |
