1 files changed, 0 insertions, 384 deletions
diff --git a/PCBSD/pc-sysinstall/backend/functions-cleanup.sh b/PCBSD/pc-sysinstall/backend/functions-cleanup.sh
deleted file mode 100644
index 1c29190..0000000
--- a/PCBSD/pc-sysinstall/backend/functions-cleanup.sh
+++ /dev/null
@@ -1,384 +0,0 @@
-#!/bin/sh
-# Functions which perform the final cleanup after an install
-
-# Finishes up with ZFS setup before unmounting
-zfs_cleanup_unmount()
-{
-  # Loop through our FS and see if we have any ZFS partitions to cleanup
-  for PART in `ls ${PARTDIR}`
-  do
-    PARTFS="`cat ${PARTDIR}/${PART} | cut -d ':' -f 1`"
-    PARTMNT="`cat ${PARTDIR}/${PART} | cut -d ':' -f 2`"
-    ZPOOLNAME=$(get_zpool_name "${PART}")
-
-    if [ "$PARTFS" = "ZFS" ]
-    then
-      # Check if we have multiple zfs mounts specified
-      for ZMNT in `echo ${PARTMNT} | sed 's|,| |g'`
-      do
-        if [ "${ZMNT}" = "/" ]
-        then
-          # Make sure we haven't already added the zfs boot line when
-          # Creating a dedicated "/boot" partition
-          cat ${FSMNT}/boot/loader.conf 2>/dev/null | grep "vfs.root.mountfrom=" >/dev/null 2>/dev/null
-          if [ "$?" != "0" ] ; then
-            echo "vfs.root.mountfrom=\"zfs:${ZPOOLNAME}\"" >> ${FSMNT}/boot/loader.conf
-          fi
-          FOUNDZFSROOT="${ZPOOLNAME}" ; export FOUNDZFSROOT
-        fi
-      done
-      FOUNDZFS="1"
-    fi
-  done
-
-  if [ ! -z "${FOUNDZFS}" ]
-  then
-    # Check if we need to add our ZFS flags to rc.conf, src.conf and loader.conf
-    cat ${FSMNT}/boot/loader.conf 2>/dev/null | grep 'zfs_load="YES"' >/dev/null 2>/dev/null
-    if [ "$?" != "0" ]
-    then
-      echo 'zfs_load="YES"' >>${FSMNT}/boot/loader.conf
-    fi
-    cat ${FSMNT}/etc/rc.conf 2>/dev/null | grep 'zfs_enable="YES"' >/dev/null 2>/dev/null
-    if [ "$?" != "0" ]
-    then
-      #echo 'zfs_enable="YES"' >>${FSMNT}/etc/rc.conf
-    fi
-
-    sleep 2
-    # Copy over any ZFS cache data
-    cp /boot/zfs/* ${FSMNT}/boot/zfs/
-
-    # Copy the hostid so that our zfs cache works
-    cp /etc/hostid ${FSMNT}/etc/hostid
-  fi
-
-  # Loop through our FS and see if we have any ZFS partitions to cleanup
-  for PART in `ls ${PARTDIR}`
-  do
-    PARTFS="`cat ${PARTDIR}/${PART} | cut -d ':' -f 1`"
-    PARTMNT="`cat ${PARTDIR}/${PART} | cut -d ':' -f 2`"
-    PARTENC="`cat ${PARTDIR}/${PART} | cut -d ':' -f 3`"
-    ZPOOLNAME=$(get_zpool_name "${PART}")
-
-    if [ "$PARTFS" = "ZFS" ]
-    then
-      # Check if we have multiple zfs mounts specified
-      for ZMNT in `echo ${PARTMNT} | sed 's|,| |g'`
-      do
-        PARTMNTREV="${ZMNT} ${PARTMNTREV}"
-      done
-
-      for ZMNT in ${PARTMNTREV}
-      do
-        if [ "${ZMNT}" != "/" ]
-        then
-          #rc_halt "zfs set mountpoint=${ZMNT} ${ZPOOLNAME}${ZMNT}"
-          rc_halt "zfs set mountpoint=${ZMNT} ${ZPOOLNAME}"
-          #rc_halt "zfs unmount ${ZPOOLNAME}${ZMNT}"
-          #sleep 2
-        fi
-      done 
-    fi
-  done
-
-};
-
-# Function which performs the specific setup for using a /boot partition
-setup_dedicated_boot_part()
-{
-  ROOTFS="${1}"
-  ROOTFSTYPE="${2}"
-  BOOTFS="${3}"
-  BOOTMNT="${4}"
-
-  # Set the root mount in loader.conf
-  echo "vfs.root.mountfrom=\"${ROOTFSTYPE}:${ROOTFS}\"" >> ${FSMNT}/boot/loader.conf
-  rc_halt "mkdir -p ${FSMNT}/${BOOTMNT}/boot"
-  rc_halt "mv ${FSMNT}/boot/* ${FSMNT}${BOOTMNT}/boot/"
-  rc_halt "mv ${FSMNT}${BOOTMNT}/boot ${FSMNT}/boot/"
-  rc_halt "umount /dev/${BOOTFS}"
-  rc_halt "mount /dev/${BOOTFS} ${FSMNT}${BOOTMNT}"
-  rc_halt "rmdir ${FSMNT}/boot"
-
-  # Strip the '/' from BOOTMNT before making symlink
-  BOOTMNTNS="`echo ${BOOTMNT} | sed 's|/||g'`"
-  rc_halt "chroot ${FSMNT} ln -s ${BOOTMNTNS}/boot /boot"
-  
-};
-
-# Function which creates the /etc/fstab for the installed system
-setup_fstab()
-{
-  FSTAB="${FSMNT}/etc/fstab"
-  rm ${FSTAB} >/dev/null 2>/dev/null
-
-  # Create the header
-  echo "# Device		Mountpoint		FStype		Options	Dump Pass" >> ${FSTAB}
-
-  # Loop through the partitions, and start creating /etc/fstab
-  for PART in `ls ${PARTDIR}`
-  do
-    PARTFS="`cat ${PARTDIR}/${PART} | cut -d ':' -f 1`"
-    PARTMNT="`cat ${PARTDIR}/${PART} | cut -d ':' -f 2`"
-    PARTENC="`cat ${PARTDIR}/${PART} | cut -d ':' -f 3`"
-    PARTLABEL="`cat ${PARTDIR}/${PART} | cut -d ':' -f 4`"
-
-    DRIVE="`echo ${PART} | rev | cut -b 4- | rev`"
-    # Check if this device is being mirrored
-    if [ -e "${MIRRORCFGDIR}/${DRIVE}" ]
-    then
-      # This device is apart of a gmirror, lets reset PART to correct value
-      MDRIVE="mirror/`cat ${MIRRORCFGDIR}/${DRIVE} | cut -d ':' -f 3`"
-      TMP="`echo ${PART} | rev | cut -b -3 | rev`"
-      PART="${MDRIVE}${TMP}"
-      PARTLABEL=""
-    fi
-
-    # Unset EXT
-    EXT=""
-
-    # Figure out if we are using a glabel, or the raw name for this entry
-    if [ ! -z "${PARTLABEL}" ]
-    then
-      DEVICE="label/${PARTLABEL}"
-    else
-      # Check if using encryption 
-      if [ "${PARTENC}" = "ON" ] ; then
-        EXT=".eli"
-      fi
-
-      if [ "${PARTFS}" = "UFS+J" ] ; then
-        EXT="${EXT}.journal"
-      fi
-      DEVICE="${PART}${EXT}"
-    fi
-
-
-    # Set our ROOTFSTYPE for loader.conf if necessary
-    check_for_mount "${PARTMNT}" "/"
-    if [ "$?" = "0" ] ; then
-      if [ "${PARTFS}" = "ZFS" ] ; then
-        ROOTFSTYPE="zfs"
-        XPOOLNAME=$(get_zpool_name "${PART}")
-        ROOTFS="${ZPOOLNAME}"
-      else
-        ROOTFS="${DEVICE}"
-        ROOTFSTYPE="ufs"
-      fi
-    fi
-
-    # Only create non-zfs partitions
-    if [ "${PARTFS}" != "ZFS" ]
-    then
-
-      # Make sure geom_journal is loaded
-      if [ "${PARTFS}" = "UFS+J" ] ; then
-        setup_gjournal
-      fi
-
-      # Save the BOOTFS for call at the end
-      if [ "${PARTMNT}" = "/boot" ] ; then
-        BOOTFS="${PART}${EXT}"
-        BOOTMNT="${BOOT_PART_MOUNT}"
-        PARTMNT="${BOOTMNT}"
-      fi
-
-      # Echo out the fstab entry now
-      if [ "${PARTFS}" = "SWAP" ]
-      then
-        echo "/dev/${DEVICE}	none			swap		sw		0	0" >> ${FSTAB}
-      else
-        echo "/dev/${DEVICE}  	${PARTMNT}			ufs		rw,noatime	1	1" >> ${FSTAB}
-      fi
-
-    fi # End of ZFS Check
-  done
-
-  # Setup some specific PC-BSD fstab options
-  if [ "$INSTALLTYPE" != "FreeBSD" ]
-  then
-    echo "procfs			/proc			procfs		rw		0	0" >> ${FSTAB}
-    echo "linprocfs		/compat/linux/proc	linprocfs	rw		0	0" >> ${FSTAB}
-    echo "tmpfs				/tmp			tmpfs		rw,mode=1777	0	0" >> ${FSTAB}
-  fi
-
-  # If we have a dedicated /boot, run the post-install setup of it now
-  if [ ! -z "${BOOTMNT}" ] ; then 
-    setup_dedicated_boot_part "${ROOTFS}" "${ROOTFSTYPE}" "${BOOTFS}" "${BOOTMNT}"
-  fi
-
-};
-
-# Setup our disk mirroring with gmirror
-setup_gmirror()
-{
-  NUM="0"
-
-  cd ${MIRRORCFGDIR}
-  for DISK in `ls *`
-  do
-    MIRRORDISK="`cat ${DISK} | cut -d ':' -f 1`"
-    MIRRORBAL="`cat ${DISK} | cut -d ':' -f 2`"
-
-    # Create this mirror device
-    gmirror label -vb $MIRRORBAL gm${NUM} /dev/${DISK} 
-
-    sleep 3
-
-    # Save the gm<num> device in our config
-    echo "${MIRRORDISK}:${MIRRORBAL}:gm${NUM}" > ${DISK}
-
-    sleep 3
-
-    NUM="`expr ${NUM} + 1`"
-  done
-
-  
-  cat ${FSMNT}/boot/loader.conf 2>/dev/null | grep 'geom_mirror_load="YES"' >/dev/null 2>/dev/null
-  if [ "$?" != "0" ]
-  then
-    echo 'geom_mirror_load="YES"' >>${FSMNT}/boot/loader.conf
-  fi
-
-};
-
-# Function which saves geli keys and sets up loading of them at boot
-setup_geli_loading()
-{
-
-  # Make our keys dir
-  mkdir -p ${FSMNT}/boot/keys >/dev/null 2>/dev/null
-
-  cd ${GELIKEYDIR}
-  for KEYFILE in `ls *`
-  do
-     # Figure out the partition name based on keyfile name removing .key
-     PART="`echo ${KEYFILE} | cut -d '.' -f 1`"
-
-     # Add the entries to loader.conf to start this geli provider at boot
-     echo "geli_${PART}_keyfile0_load=\"YES\"" >> ${FSMNT}/boot/loader.conf 
-     echo "geli_${PART}_keyfile0_type=\"${PART}:geli_keyfile0\"" >> ${FSMNT}/boot/loader.conf 
-     echo "geli_${PART}_keyfile0_name=\"/boot/keys/${KEYFILE}\"" >> ${FSMNT}/boot/loader.conf 
-
-     # If we have a passphrase, set it up now
-     if [ -e "${PARTDIR}-enc/${PART}-encpass" ] ; then
-       cat ${PARTDIR}-enc/${PART}-encpass | geli setkey -S -n 0 -p -k ${KEYFILE} -K ${KEYFILE} ${PART}
-       geli configure -b ${PART}
-     fi
-
-     # Copy the key to the disk
-     cp ${KEYFILE} ${FSMNT}/boot/keys/${KEYFILE}
-  done
-
-  # Make sure we have geom_eli set to load at boot
-  cat ${FSMNT}/boot/loader.conf 2>/dev/null | grep 'geom_eli_load="YES"' >/dev/null 2>/dev/null
-  if [ "$?" != "0" ]
-  then
-    echo 'geom_eli_load="YES"' >>${FSMNT}/boot/loader.conf
-  fi
-
-};
-
-
-# Function to generate a random hostname if none was specified
-gen_hostname()
-{
-  RAND="`jot -r 1 1 9000`"
-
-  if [ "$INSTALLTYPE" = "FreeBSD" ]
-  then
-    VAL="freebsd-${RAND}" 
-  else
-    VAL="pcbsd-${RAND}" 
-  fi
-
-  export VAL
-
-};
-
-# Function which sets up the hostname for the system
-setup_hostname()
-{
-
-  get_value_from_cfg hostname
-  HOSTNAME="${VAL}"
-
-  # If we don't have a hostname, make one up
-  if [ -z "${HOSTNAME}" ]
-  then
-    gen_hostname
-    HOSTNAME="${VAL}"
-  fi
-
-  # Clean up any saved hostname
-  cat ${FSMNT}/etc/rc.conf | grep -v "hostname=" >${FSMNT}/etc/rc.conf.new
-  mv ${FSMNT}/etc/rc.conf.new ${FSMNT}/etc/rc.conf
-
-  # Set the hostname now
-  echo_log "Setting hostname: ${HOSTNAME}"
-  echo "hostname=\"${HOSTNAME}\"" >> ${FSMNT}/etc/rc.conf
-  sed -i -e "s|my.domain|${HOSTNAME} ${HOSTNAME}|g" ${FSMNT}/etc/hosts
-
-};
-
-
-# Check and make sure geom_journal is enabled on the system
-setup_gjournal()
-{
-
-  # Make sure we have geom_journal set to load at boot
-  cat ${FSMNT}/boot/loader.conf 2>/dev/null | grep 'geom_journal_load="YES"' >/dev/null 2>/dev/null
-  if [ "$?" != "0" ]
-  then
-    echo 'geom_journal_load="YES"' >>${FSMNT}/boot/loader.conf
-  fi
-
-};
-
-# Function which sets the root password from the install config
-set_root_pw()
-{
-  get_value_from_cfg_with_spaces rootPass
-  PW="${VAL}"
-
-  # If we don't have a root pass, return
-  if [ -z "${PW}" ]
-  then
-    return 0
-  fi
-
-  echo_log "Setting root password"
-  echo "${PW}" > ${FSMNT}/.rootpw
-  run_chroot_cmd "cat /.rootpw | pw usermod root -h 0"
-  rc_halt "rm ${FSMNT}/.rootpw"
-
-};
-
-
-run_final_cleanup()
-{
-
- # Check if we need to run any gmirror setup
- ls ${MIRRORCFGDIR}/* >/dev/null 2>/dev/null
- if [ "$?" = "0" ]
- then
-   # Lets setup gmirror now
-   setup_gmirror
- fi
-
- # Check if we need to save any geli keys
- ls ${GELIKEYDIR}/* >/dev/null 2>/dev/null
- if [ "$?" = "0" ]
- then
-   # Lets setup geli loading
-   setup_geli_loading
- fi
-
- # Set the root_pw if it is specified
- set_root_pw
-
- # Generate the fstab for the installed system
- setup_fstab
-
-};