Create upgrade scripts for embedded which turns on the serial console.

2 files changed, 560 insertions, 0 deletions

diff --git a/tmp/post_upgrade_command b/tmp/post_upgrade_command
new file mode 100755
index 0000000..c95af2e
--- /dev/null
+++ b/tmp/post_upgrade_command
@@ -0,0 +1,548 @@
+#!/bin/sh
+
+/etc/rc.conf_mount_rw
+
+# Make sure gettytab is correct
+cat <<EOFEOF >/etc/gettytab
+# $FreeBSD: src/etc/gettytab,v 1.22 2004/06/06 11:46:27 schweikh Exp $
+#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
+#
+# Most of the table entries here are just copies of the old getty table,
+# it is by no means certain, or even likely, that any of them are optimal
+# for any purpose whatever.  Nor is it likely that more than a couple are
+# even correct.
+#
+# The default gettytab entry, used to set defaults for all other
+# entries, and in cases where getty is called with no table name.
+#
+# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
+# be changed to turn them off (:cb@:ce@:ck@:).
+#
+# lc should always be on; it's a remainder of some stone age when there
+# have been terminals around not being able of handling lower-case
+# characters. Those terminals aren't supported any longer, but getty is
+#
+# specify no parity.   The different parities are:
+#     (none): same as ep for getty.  login will use terminal as is.
+#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
+#             fake parity.  login will use even parity (cs7 parenb -parodd).
+#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
+#             getty will fake odd parity as well.
+#     ap:     same as ep except -inpck instead of inpck for login.
+#             ap overrides op and ep.
+#     np:     1. don't fake parity in getty.  The fake parity garbles
+#                characters on non-terminals (like pccons) that don't
+#                support parity.  It would probably better for getty not to
+#                try to fake parity.  It could just use cbreak mode so as
+#                not to force cs8 and let the hardware handle the parity.
+#                login has to be rely on the hardware anyway.
+#             2. set cs8 -parenb -istrip -inpck.
+#     ep:op:  same as ap.
+#
+default:\
+	::cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
+	:if=/etc/issue:
+
+#
+# Fixed speed entries
+#
+#	The "std.NNN" names are known to the special case
+#	portselector code in getty, however they can
+#	be assigned to any table desired.
+#	The "NNN-baud" names are known to the special case
+#	autobaud code in getty, and likewise can
+#	be assigned to any table desired (hopefully the same speed).
+#
+a|std.110|110-baud:\
+	:np:nd#1:cd#1:uc:sp#110:
+b|std.134|134.5-baud:\
+	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
+1|std.150|150-baud:\
+	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
+c|std.300|300-baud:\
+	:np:nd#1:cd#1:sp#300:
+d|std.600|600-baud:\
+	:np:nd#1:cd#1:sp#600:
+f|std.1200|1200-baud:\
+	:np:fd#1:sp#1200:
+6|std.2400|2400-baud:\
+	:np:sp#2400:
+7|std.4800|4800-baud:\
+	:np:sp#4800:
+2|std.9600|9600-baud:\
+	:np:sp#9600:
+g|std.19200|19200-baud:\
+	:np:sp#19200:
+std.38400|38400-baud:\
+	:np:sp#38400:
+std.57600|57600-baud:\
+	:np:sp#57600:
+std.115200|115200-baud:\
+	:np:sp#115200:
+std.230400|230400-baud:\
+	:np:sp#230400:
+
+#
+# Entry specifying explicit device settings.  See termios(4) and
+# /usr/include/termios.h, too.  The entry forces the tty into
+# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
+#
+# cflags: CLOCAL | HUPCL | CREAD | CS8
+# oflags: OPOST | ONLCR | OXTABS
+# iflags: IXOFF | IXON | ICRNL | IGNPAR
+# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
+#
+# (Echoing is done inside getty itself.)
+#
+local.9600|CLOCAL tty @ 9600 Bd:\
+	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
+	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
+	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
+	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
+	:sp#9600:
+
+#
+# Dial in rotary tables, speed selection via 'break'
+#
+0|d300|Dial-300:\
+	:nx=d1200:cd#2:sp#300:
+d1200|Dial-1200:\
+	:nx=d150:fd#1:sp#1200:
+d150|Dial-150:\
+	:nx=d110:lm@:tc=150-baud:
+d110|Dial-110:\
+	:nx=d300:tc=300-baud:
+
+#
+# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
+#
+D2400|d2400|Fast-Dial-2400:\
+	:nx=D1200:tc=2400-baud:
+3|D1200|Fast-Dial-1200:\
+	:nx=D300:tc=1200-baud:
+5|D300|Fast-Dial-300:\
+	:nx=D2400:tc=300-baud:
+
+#
+#telebit (19200)
+#
+t19200:\
+	:nx=t2400:tc=19200-baud:
+t2400:\
+	:nx=t1200:tc=2400-baud:
+t1200:\
+	:nx=t19200:tc=1200-baud:
+
+#
+#telebit (9600)
+#
+t9600:\
+	:nx=t2400a:tc=9600-baud:
+t2400a:\
+	:nx=t1200a:tc=2400-baud:
+t1200a:\
+	:nx=t9600:tc=1200-baud:
+
+#
+# Odd special case terminals
+#
+-|tty33|asr33|Pity the poor user of this beast:\
+	:tc=110-baud:
+
+4|Console|Console Decwriter II:\
+	:nd@:cd@:rw:tc=300-baud:
+
+e|Console-1200|Console Decwriter III:\
+	:fd@:nd@:cd@:rw:tc=1200-baud:
+
+i|Interdata console:\
+	:uc:sp#0:
+
+l|lsi chess terminal:\
+	:sp#300:
+
+X|Xwindow|X window system:\
+	:fd@:nd@:cd@:rw:sp#9600:
+
+P|Pc|Pc console:\
+	:ht:np:sp#115200:al=root:
+
+bootupcli:\
+	tc=std.9600:\
+	:ht:np:sp#115200:al=root:
+
+#
+# Wierdo special case for fast crt's with hardcopy devices
+#
+8|T9600|CRT with hardcopy:\
+	:nx=T300:tc=9600-baud:
+9|T300|CRT with hardcopy (300):\
+	:nx=T9600:tc=300-baud:
+
+#
+# Plugboard, and misc other terminals
+#
+plug-9600|Plugboard-9600:\
+	:pf#1:tc=9600-baud:
+p|P9600|Plugboard-9600-rotary:\
+	:pf#1:nx=P300:tc=9600-baud:
+q|P300|Plugboard-300:\
+	:pf#1:nx=P1200:tc=300-baud:
+r|P1200|Plugboard-1200:\
+	:pf#1:nx=P9600:tc=1200-baud:
+
+#
+# XXXX Port selector
+#
+s|DSW|Port Selector:\
+	:ps:sp#2400:
+
+#
+# Auto-baud speed detect entry for Micom 600.
+# Special code in getty will switch this out
+# to one of the NNN-baud entries.
+#
+A|Auto-baud:\
+	:ab:sp#2400:f0#040:
+
+#
+# autologin - automatically log in as root
+#
+
+autologin|al.9600:\
+	::tc=std.9600:
+
+#
+# Entries for 3-wire serial terminals.  These don't supply carrier, so
+# clocal needs to be set, and crtscts needs to be unset.
+#
+3wire.9600|9600-3wire:\
+	:np:nc:sp#9600:
+3wire.38400|38400-3wire:\
+	:np:nc:sp#38400:
+3wire.57600|57600-3wire:\
+	:np:nc:sp#57600:
+3wire.115200|115200-3wire:\
+	:np:nc:sp#115200:
+3wire.230400|230400-3wire:\
+	:np:nc:sp#230400:
+
+EOFEOF
+
+# Make sure /etc/ttys is correct
+cat <<EOFEOFA >/etc/ttys
+#
+# $FreeBSD: src/etc/etc.i386/ttys,v 1.10 2003/10/24 15:44:08 simokawa Exp $
+#	@(#)ttys	5.1 (Berkeley) 4/17/89
+#
+# This file specifies various information about terminals on the system.
+# It is used by several different programs.  Common entries for the
+# various columns include:
+#
+# name  The name of the terminal device.
+#
+# getty The program to start running on the terminal.  Typically a
+#       getty program, as the name implies.  Other common entries
+#       include none, when no getty is needed, and xdm, to start the
+#       X Window System.
+#
+# type The initial terminal type for this port.  For hardwired
+#      terminal lines, this will contain the type of terminal used.
+#      For virtual consoles, the correct type is typically cons25, but
+#      vt220 will work better if you need interoperability with other
+#      systems like Solaris or GNU/Linux.
+#      Other common values include network for network connections on
+#      pseudo-terminals, dialup for incoming modem ports, and unknown
+#      when the terminal type cannot be predetermined.
+#
+# status Must be on or off.  If on, init will run the getty program on
+#        the specified port.  If the word "secure" appears, this tty
+#        allows root login.
+#
+# name	getty				type	status		comments
+#
+# If console is marked "insecure", then init will ask for the root password
+# when going to single-user mode.
+console	none				unknown	off secure
+#
+ttyv0	"/usr/libexec/getty Pc"		cons25	on  secure
+# Virtual terminals
+ttyv1	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv2	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv3	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv4	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv5	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv6	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv7	"/usr/libexec/getty Pc"		cons25	off  secure
+ttyv8	"/usr/X11R6/bin/xdm -nodaemon"	xterm	off secure
+# Serial terminals
+# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
+ttyd0	"/usr/libexec/getty bootupcli"	dialup	off secure
+ttyd1	"/usr/libexec/getty std.9600"	dialup	off secure
+ttyd2	"/usr/libexec/getty std.9600"	dialup	off secure
+ttyd3	"/usr/libexec/getty std.9600"	dialup	off secure
+# Dumb console
+dcons	"/usr/libexec/getty std.9600"	vt100	off secure
+# Pseudo terminals
+ttyp0	none			network
+ttyp1	none			network
+ttyp2	none			network
+ttyp3	none			network
+ttyp4	none			network
+ttyp5	none			network
+ttyp6	none			network
+ttyp7	none			network
+ttyp8	none			network
+ttyp9	none			network
+ttypa	none			network
+ttypb	none			network
+ttypc	none			network
+ttypd	none			network
+ttype	none			network
+ttypf	none			network
+ttypg	none			network
+ttyph	none			network
+ttypi	none			network
+ttypj	none			network
+ttypk	none			network
+ttypl	none			network
+ttypm	none			network
+ttypn	none			network
+ttypo	none			network
+ttypp	none			network
+ttypq	none			network
+ttypr	none			network
+ttyps	none			network
+ttypt	none			network
+ttypu	none			network
+ttypv	none			network
+ttyq0	none			network
+ttyq1	none			network
+ttyq2	none			network
+ttyq3	none			network
+ttyq4	none			network
+ttyq5	none			network
+ttyq6	none			network
+ttyq7	none			network
+ttyq8	none			network
+ttyq9	none			network
+ttyqa	none			network
+ttyqb	none			network
+ttyqc	none			network
+ttyqd	none			network
+ttyqe	none			network
+ttyqf	none			network
+ttyqg	none			network
+ttyqh	none			network
+ttyqi	none			network
+ttyqj	none			network
+ttyqk	none			network
+ttyql	none			network
+ttyqm	none			network
+ttyqn	none			network
+ttyqo	none			network
+ttyqp	none			network
+ttyqq	none			network
+ttyqr	none			network
+ttyqs	none			network
+ttyqt	none			network
+ttyqu	none			network
+ttyqv	none			network
+ttyr0	none			network
+ttyr1	none			network
+ttyr2	none			network
+ttyr3	none			network
+ttyr4	none			network
+ttyr5	none			network
+ttyr6	none			network
+ttyr7	none			network
+ttyr8	none			network
+ttyr9	none			network
+ttyra	none			network
+ttyrb	none			network
+ttyrc	none			network
+ttyrd	none			network
+ttyre	none			network
+ttyrf	none			network
+ttyrg	none			network
+ttyrh	none			network
+ttyri	none			network
+ttyrj	none			network
+ttyrk	none			network
+ttyrl	none			network
+ttyrm	none			network
+ttyrn	none			network
+ttyro	none			network
+ttyrp	none			network
+ttyrq	none			network
+ttyrr	none			network
+ttyrs	none			network
+ttyrt	none			network
+ttyru	none			network
+ttyrv	none			network
+ttys0	none			network
+ttys1	none			network
+ttys2	none			network
+ttys3	none			network
+ttys4	none			network
+ttys5	none			network
+ttys6	none			network
+ttys7	none			network
+ttys8	none			network
+ttys9	none			network
+ttysa	none			network
+ttysb	none			network
+ttysc	none			network
+ttysd	none			network
+ttyse	none			network
+ttysf	none			network
+ttysg	none			network
+ttysh	none			network
+ttysi	none			network
+ttysj	none			network
+ttysk	none			network
+ttysl	none			network
+ttysm	none			network
+ttysn	none			network
+ttyso	none			network
+ttysp	none			network
+ttysq	none			network
+ttysr	none			network
+ttyss	none			network
+ttyst	none			network
+ttysu	none			network
+ttysv	none			network
+ttyP0	none			network
+ttyP1	none			network
+ttyP2	none			network
+ttyP3	none			network
+ttyP4	none			network
+ttyP5	none			network
+ttyP6	none			network
+ttyP7	none			network
+ttyP8	none			network
+ttyP9	none			network
+ttyPa	none			network
+ttyPb	none			network
+ttyPc	none			network
+ttyPd	none			network
+ttyPe	none			network
+ttyPf	none			network
+ttyPg	none			network
+ttyPh	none			network
+ttyPi	none			network
+ttyPj	none			network
+ttyPk	none			network
+ttyPl	none			network
+ttyPm	none			network
+ttyPn	none			network
+ttyPo	none			network
+ttyPp	none			network
+ttyPq	none			network
+ttyPr	none			network
+ttyPs	none			network
+ttyPt	none			network
+ttyPu	none			network
+ttyPv	none			network
+ttyQ0	none			network
+ttyQ1	none			network
+ttyQ2	none			network
+ttyQ3	none			network
+ttyQ4	none			network
+ttyQ5	none			network
+ttyQ6	none			network
+ttyQ7	none			network
+ttyQ8	none			network
+ttyQ9	none			network
+ttyQa	none			network
+ttyQb	none			network
+ttyQc	none			network
+ttyQd	none			network
+ttyQe	none			network
+ttyQf	none			network
+ttyQg	none			network
+ttyQh	none			network
+ttyQi	none			network
+ttyQj	none			network
+ttyQk	none			network
+ttyQl	none			network
+ttyQm	none			network
+ttyQn	none			network
+ttyQo	none			network
+ttyQp	none			network
+ttyQq	none			network
+ttyQr	none			network
+ttyQs	none			network
+ttyQt	none			network
+ttyQu	none			network
+ttyQv	none			network
+ttyR0	none			network
+ttyR1	none			network
+ttyR2	none			network
+ttyR3	none			network
+ttyR4	none			network
+ttyR5	none			network
+ttyR6	none			network
+ttyR7	none			network
+ttyR8	none			network
+ttyR9	none			network
+ttyRa	none			network
+ttyRb	none			network
+ttyRc	none			network
+ttyRd	none			network
+ttyRe	none			network
+ttyRf	none			network
+ttyRg	none			network
+ttyRh	none			network
+ttyRi	none			network
+ttyRj	none			network
+ttyRk	none			network
+ttyRl	none			network
+ttyRm	none			network
+ttyRn	none			network
+ttyRo	none			network
+ttyRp	none			network
+ttyRq	none			network
+ttyRr	none			network
+ttyRs	none			network
+ttyRt	none			network
+ttyRu	none			network
+ttyRv	none			network
+ttyS0	none			network
+ttyS1	none			network
+ttyS2	none			network
+ttyS3	none			network
+ttyS4	none			network
+ttyS5	none			network
+ttyS6	none			network
+ttyS7	none			network
+ttyS8	none			network
+ttyS9	none			network
+ttySa	none			network
+ttySb	none			network
+ttySc	none			network
+ttySd	none			network
+ttySe	none			network
+ttySf	none			network
+ttySg	none			network
+ttySh	none			network
+ttySi	none			network
+ttySj	none			network
+ttySk	none			network
+ttySl	none			network
+ttySm	none			network
+ttySn	none			network
+ttySo	none			network
+ttySp	none			network
+ttySq	none			network
+ttySr	none			network
+ttySs	none			network
+ttySt	none			network
+ttySu	none			network
+ttySv	none			network
+
+EOFEOFA
+
+# Now turn on or off serial console as needed
+php -f /tmp/post_upgrade_command.php
+
diff --git a/tmp/post_upgrade_command.php b/tmp/post_upgrade_command.php
new file mode 100755
index 0000000..7f5f627
--- /dev/null
+++ b/tmp/post_upgrade_command.php
@@ -0,0 +1,12 @@
+#!/usr/local/bin/php -f 
+<?php
+	/* upgrade embedded users serial console */
+	require_once("globals.inc");
+	require_once("functions.inc");
+	require_once("config.inc");
+	if($g['platform'] == "embedded") {
+		$config['system']['enableserial'] = true;
+		write_config();
+	}
+	setup_serial_port();
+?>
\ No newline at end of file