Automatically choose some interface combinations

on factory default boot.
This allows the system to switch interfaces from the newer ones in the
default config (e.g. em0 em1) back to the interfaces used by:
Alix - vr1 vr0
APU - re1 re2
that match the WAN and LAN labels printed on many existing devices.
It means these devices can boot the default config and this will
automatically detect that there is no em0/em1 and will instead select
whatever exists out of vr1/vr0 or re1/re2. This avoids the user having
to use the serial cable to do interface assignment when starting a brand
new image, or when resetting to factory defaults. It could easily be
extended to other common interface combinations.
For me, this (or similar) would be very beneficial. At remote sites it
is really good if it is possible to do reset to factory defaults, or put
a fresh CF/SD card in, and the system boots without needing to connect a
serial cable and do interface assignment.

2 files changed, 63 insertions, 0 deletions

diff --git a/src/etc/inc/config.console.inc b/src/etc/inc/config.console.inc
index 33194bf..b4000e7 100644
--- a/src/etc/inc/config.console.inc
+++ b/src/etc/inc/config.console.inc
@@ -563,4 +563,63 @@ EOD;
 	}
 }
 
+function check_for_alternate_interfaces() {
+	global $config;
+
+	// If the WAN and/or LAN devices in the factory default config do not exist,
+	// then look for alternate devices.
+	// This lets many systems boot a factory default config without being
+	// forced to do interface assignment on the console.
+
+	$specplatform = system_identify_specific_platform();
+	$default_device = array();
+
+	// If we recognise the platform, then specify the devices directly.
+	switch ($specplatform['name']) {
+		case 'alix':
+			$default_device['wan'] = "vr1";
+			$default_device['lan'] = "vr0";
+			break;
+		case 'APU':
+			$default_device['wan'] = "re1";
+			$default_device['lan'] = "re2";
+			break;
+		case 'RCC-VE':
+			$default_device['wan'] = "igb0";
+			$default_device['lan'] = "igb1";
+			break;
+		default:
+			$default_device['wan'] = "";
+			$default_device['lan'] = "";
+			break;
+	}
+
+	// Other common device names can be put here and will be looked for
+	// if the system was not one of the known platforms.
+	$other_devices_arr['wan'] = array("vr1", "re1", "igb0", "em0");
+	$other_devices_arr['lan'] = array("vr0", "re2", "igb1", "em1");
+	$interface_assignment_changed = false;
+
+	foreach ($other_devices_arr as $ifname => $other_devices) {
+		if (!does_interface_exist($config['interfaces'][$ifname]['if'])) {
+			if (does_interface_exist($default_device[$ifname])) {
+				$config['interfaces'][$ifname]['if'] = $default_device[$ifname];
+				$interface_assignment_changed = true;
+			} else {
+				foreach ($other_devices as $other_device) {
+					if (does_interface_exist($other_device)) {
+						$config['interfaces'][$ifname]['if'] = $other_device;
+						$interface_assignment_changed = true;
+						break;
+					}
+				}
+			}
+		}
+	}
+
+	if ($interface_assignment_changed) {
+		write_config("Factory default boot detected WAN " . $config['interfaces']['wan']['if'] . " and LAN " . $config['interfaces']['lan']['if']);
+	}
+}
+
 ?>
diff --git a/src/etc/rc.bootup b/src/etc/rc.bootup
index 78f9a39..df434f2 100755
--- a/src/etc/rc.bootup
+++ b/src/etc/rc.bootup
@@ -158,6 +158,10 @@ echo "done.\n";
 /* run any early shell commands specified in config.xml */
 system_do_shell_commands(1);
 
+if (file_exists("/conf/trigger_initial_wizard")) {
+	check_for_alternate_interfaces();
+}
+
 /*
  *	Determine if we need to throw a interface exception
  *	and ask the user to reassign interfaces.  This will