Call set_networking_interfaces_ports();

1 files changed, 8 insertions, 272 deletions

diff --git a/etc/rc.initial.setports b/etc/rc.initial.setports
index e08b574..c95297a 100755
--- a/etc/rc.initial.setports
+++ b/etc/rc.initial.setports
@@ -1,22 +1,23 @@
 #!/usr/local/bin/php -f
 <?php
+/* $Id$ */
 /*
 	rc.initial.setports
 	part of m0n0wall (http://m0n0.ch/wall)
-	
-	Copyright (C) 2003-2005 Manuel Kasper <mk@neon1.net>.
+
+	Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
 	All rights reserved.
-	
+
 	Redistribution and use in source and binary forms, with or without
 	modification, are permitted provided that the following conditions are met:
-	
+
 	1. Redistributions of source code must retain the above copyright notice,
 	   this list of conditions and the following disclaimer.
-	
+
 	2. Redistributions in binary form must reproduce the above copyright
 	   notice, this list of conditions and the following disclaimer in the
 	   documentation and/or other materials provided with the distribution.
-	
+
 	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
@@ -32,272 +33,7 @@
 	/* parse the configuration and include all functions used below */
 	require_once("config.inc");
 	require_once("functions.inc");
-	
-	$fp = fopen('php://stdin', 'r');
-	
-	$iflist = get_interface_list();
-	
-	echo <<<EOD
-
-Valid interfaces are:
-
-
-EOD;
-
-	foreach ($iflist as $iface => $ifa) {
-		echo sprintf("% -8s%s%s\n", $iface, $ifa['mac'],
-			$ifa['up'] ? "   (up)" : "");
-	}
-	
-	echo <<<EOD
-
-Do you want to set up VLANs first?
-If you're not going to use VLANs, or only for optional interfaces, you
-should say no here and use the webGUI to configure VLANs later, if required.
-
-Do you want to set up VLANs now? (y/n) 
-EOD;
-	
-	if (strcasecmp(chop(fgets($fp)), "y") == 0)
-		vlan_setup();
-	
-	if (is_array($config['vlans']['vlan']) && count($config['vlans']['vlan'])) {
-		
-		echo "\n\nVLAN interfaces:\n\n";
-		$i = 0;
-		foreach ($config['vlans']['vlan'] as $vlan) {
-			
-			echo sprintf("% -8s%s\n", "vlan{$i}",
-				"VLAN tag {$vlan['tag']}, interface {$vlan['if']}");
-				
-			$iflist['vlan' . $i] = array();
-			$i++;
-		}
-	}
-	
-	echo <<<EOD
-
-If you don't know the names of your interfaces, you may choose to use
-auto-detection. In that case, disconnect all interfaces before you begin,
-and reconnect each one when prompted to do so.
-
-EOD;
-	
-	do {
-		echo "\nEnter the LAN interface name or 'a' for auto-detection: ";
-		$lanif = chop(fgets($fp));
-		if ($lanif === "") {
-			exit(0);
-		}
-		
-		if ($lanif === "a")
-			$lanif = autodetect_interface("LAN", $fp);
-		else if (!array_key_exists($lanif, $iflist)) {
-			echo "\nInvalid interface name '{$lanif}'\n";
-			unset($lanif);
-			continue;
-		}
-	} while (!$lanif);
-	
-	do {
-		echo "\nEnter the WAN interface name or 'a' for auto-detection: ";
-		$wanif = chop(fgets($fp));
-		if ($wanif === "") {
-			exit(0);
-		}
-		if ($wanif === "a")
-			$wanif = autodetect_interface("WAN", $fp);
-		else if (!array_key_exists($wanif, $iflist)) {
-			echo "\nInvalid interface name '{$wanif}'\n";
-			unset($wanif);
-			continue;
-		}
-	} while (!$wanif);
-	
-	/* optional interfaces */
-	$i = 0;
-	$optif = array();
-	
-	while (1) {
-		if ($optif[$i])
-			$i++;
-		$i1 = $i + 1;
-		echo "\nEnter the Optional {$i1} interface name or 'a' for auto-detection\n" .
-			"(or nothing if finished): ";
-		$optif[$i] = chop(fgets($fp));
-		
-		if ($optif[$i]) {
-			if ($optif[$i] === "a") {
-				$ad = autodetect_interface("Optional " . $i1, $fp);
-				if ($ad)
-					$optif[$i] = $ad;
-				else
-					unset($optif[$i]);
-			} else if (!array_key_exists($optif[$i], $iflist)) {
-				echo "\nInvalid interface name '{$optif[$i]}'\n";
-				unset($optif[$i]);
-				continue;
-			}
-		} else {
-			unset($optif[$i]);
-			break;
-		}
-	}
-	
-	/* check for double assignments */
-	$ifarr = array_merge(array($lanif, $wanif), $optif);
-	
-	for ($i = 0; $i < (count($ifarr)-1); $i++) {
-		for ($j = ($i+1); $j < count($ifarr); $j++) {
-			if ($ifarr[$i] == $ifarr[$j]) {
-				echo <<<EOD
-	
-Error: you can't assign the same interface name twice!
-
-EOD;
-
-				exit(0);
-			}
-		}
-	}
-	
-	echo <<<EOD
-	
-The interfaces will be assigned as follows:
-
-LAN  -> {$lanif}
-WAN  -> {$wanif}
-
-EOD;
-
-	for ($i = 0; $i < count($optif); $i++) {
-		echo "OPT" . ($i+1) . " -> " . $optif[$i] . "\n";
-	}
-
-echo <<<EOD
-
-The firewall will reboot after saving the changes.
-
-Do you want to proceed? (y/n) 
-EOD;
-	
-	if (strcasecmp(chop(fgets($fp)), "y") == 0) {
-	
-		$config['interfaces']['lan']['if'] = $lanif;
-		if (preg_match($g['wireless_regex'], $lanif)) {
-			if (!is_array($config['interfaces']['lan']['wireless']))
-				$config['interfaces']['lan']['wireless'] = array();
-		} else {
-			unset($config['interfaces']['lan']['wireless']);
-		}
-		
-		$config['interfaces']['wan']['if'] = $wanif;
-		if (preg_match($g['wireless_regex'], $wanif)) {
-			if (!is_array($config['interfaces']['wan']['wireless']))
-				$config['interfaces']['wan']['wireless'] = array();
-		} else {
-			unset($config['interfaces']['wan']['wireless']);
-		}
-		
-		for ($i = 0; $i < count($optif); $i++) {
-			if (!is_array($config['interfaces']['opt' . ($i+1)]))
-				$config['interfaces']['opt' . ($i+1)] = array();
-			
-			$config['interfaces']['opt' . ($i+1)]['if'] = $optif[$i];
-			
-			/* wireless interface? */
-			if (preg_match($g['wireless_regex'], $optif[$i])) {
-				if (!is_array($config['interfaces']['opt' . ($i+1)]['wireless']))
-					$config['interfaces']['opt' . ($i+1)]['wireless'] = array();
-			} else {
-				unset($config['interfaces']['opt' . ($i+1)]['wireless']);
-			}
-			
-			unset($config['interfaces']['opt' . ($i+1)]['enable']);
-			$config['interfaces']['opt' . ($i+1)]['descr'] = "OPT" . ($i+1);
-		}
-		
-		/* remove all other (old) optional interfaces */
-		for (; isset($config['interfaces']['opt' . ($i+1)]); $i++)
-			unset($config['interfaces']['opt' . ($i+1)]);
-		
-		write_config();
-		
-		echo <<<EOD
-
-The firewall is rebooting now.
-
-EOD;
-	
-		system_reboot_sync();
-	}
-	
-	function autodetect_interface($ifname, $fp) {
-		$iflist_prev = get_interface_list();
-		echo <<<EOD
-
-Connect the {$ifname} interface now and make sure that the link is up.
-Then press ENTER to continue.
-
-EOD;
-		fgets($fp);
-		$iflist = get_interface_list();
-		
-		foreach ($iflist_prev as $ifn => $ifa) {
-			if (!$ifa['up'] && $iflist[$ifn]['up']) {
-				echo "Detected link-up on interface {$ifn}.\n";
-				return $ifn;
-			}
-		}
-		
-		echo "No link-up detected.\n";
-		
-		return null;
-	}
-	
-	function vlan_setup() {
-		global $iflist, $config, $g, $fp;
-		
-		if (is_array($config['vlans']['vlan']) && count($config['vlans']['vlan'])) {
-		
-		echo <<<EOD
 
-WARNING: all existing VLANs will be cleared if you proceed!
+	set_networking_interfaces_ports();
 
-Do you want to proceed? (y/n) 
-EOD;
-	
-		if (strcasecmp(chop(fgets($fp)), "y") != 0)
-			return;
-		}
-		
-		$config['vlans']['vlan'] = array();
-		echo "\n";
-		
-		while (1) {
-			$vlan = array();
-			
-			echo "\nEnter the parent interface name for the new VLAN (or nothing if finished): ";
-			$vlan['if'] = chop(fgets($fp));
-			
-			if ($vlan['if']) {
-				if (!array_key_exists($vlan['if'], $iflist)) {
-					echo "\nInvalid interface name '{$vlan['if']}'\n";
-					continue;
-				}
-			} else {
-				break;
-			}
-			
-			echo "Enter the VLAN tag (1-4094): ";
-			$vlan['tag'] = chop(fgets($fp));
-			
-			if (!is_numericint($vlan['tag']) || ($vlan['tag'] < 1) || ($vlan['tag'] > 4094)) {
-				echo "\nInvalid VLAN tag '{$vlan['tag']}'\n";
-				continue;
-			}
-			
-			$config['vlans']['vlan'][] = $vlan;
-		}
-	}
 ?>