Output logs to /conf/

1 files changed, 97 insertions, 83 deletions

diff --git a/etc/rc.firmware b/etc/rc.firmware
index 61b25a0..694b078 100755
--- a/etc/rc.firmware
+++ b/etc/rc.firmware
@@ -32,36 +32,36 @@ ENDOFF
 }
 
 output_env_to_log() {
-	date >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	date >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 	
-	ls -lah /dev/ >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	ls -lah /dev/ >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
-	ls -lah $IMG >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	ls -lah $IMG >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
-	md5 $IMG >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	md5 $IMG >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
-	mount >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	mount >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
-	top >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	top >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 }
 
 backup_chflags() {
 	TOPROCESS="bin lib libexec sbin usr"
 	for files in $TOPROCESS; do
-		/usr/sbin/mtree -Pcp /${files} | bzip2 -9 > /tmp/chflags.dist.${files}.bz2 >> /cf/upgrade_log.txt 2>&1
+		/usr/sbin/mtree -Pcp /${files} | bzip2 -9 > /tmp/chflags.dist.${files}.bz2 >> /conf/upgrade_log.txt 2>&1
 	done
 }
 
 restore_chflags() {
 	TOPROCESS="bin lib libexec sbin usr"
 	for files in $TOPROCESS; do
-		cd / && /usr/bin/bzcat /tmp/chflags.dist.${files}.bz2 | /usr/sbin/mtree -PU -p /${files} >> /cf/upgrade_log.txt 2>&1
+		cd / && /usr/bin/bzcat /tmp/chflags.dist.${files}.bz2 | /usr/sbin/mtree -PU -p /${files} >> /conf/upgrade_log.txt 2>&1
 	done
 }
 
@@ -113,8 +113,8 @@ binary_update() {
 
 case $ACTION in
 enable)
-	touch /cf/upgrade_log.txt
-	echo "" > /cf/upgrade_log.txt
+	touch /conf/upgrade_log.txt
+	echo "" > /conf/upgrade_log.txt
 	;;
 auto)
 	touch /var/run/firmwarelock.dirty
@@ -127,7 +127,7 @@ pfSenseNanoBSDupgrade)
 
 	# Sanity check - bail early if there's no firmware file!
 	if [ ! -r $IMG ]; then
-		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /cf/upgrade_log.txt 2>&1
+		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /conf/upgrade_log.txt 2>&1
 		/etc/rc.conf_mount_ro
 		exit 1
 	fi
@@ -142,18 +142,18 @@ pfSenseNanoBSDupgrade)
 
 	touch /var/run/firmwarelock.dirty
 
-	echo "NanoBSD Firmware upgrade in progress..."  >> /cf/upgrade_log.txt 2>&1
+	echo "NanoBSD Firmware upgrade in progress..."  >> /conf/upgrade_log.txt 2>&1
 	echo "NanoBSD Firmware upgrade in progress..." | wall
 
 	# backup config
 	/bin/mkdir -p /tmp/configbak
 	cp -p /conf/* /tmp/configbak 2>/dev/null
 
-	touch /cf/upgrade_log.txt
-	echo "" > /cf/upgrade_log.txt
+	touch /conf/upgrade_log.txt
+	echo "" > /conf/upgrade_log.txt
 
-	echo "Installing $IMG." >> /cf/upgrade_log.txt 2>&1
-	echo "Installing $IMG." >> /cf/upgrade_log.txt
+	echo "Installing $IMG." >> /conf/upgrade_log.txt 2>&1
+	echo "Installing $IMG." >> /conf/upgrade_log.txt
 
 	# resolve glabel label that we booted from
 	BOOT_DEVICE=`/sbin/mount | /usr/bin/grep pfsense | /usr/bin/cut -d'/' -f4 | /usr/bin/cut -d' ' -f1`
@@ -181,39 +181,49 @@ pfSenseNanoBSDupgrade)
 	fi
 
 	# Output specifc information that this script is using
-	echo "SLICE $SLICE" >> /cf/upgrade_log.txt
-	echo "OLDSLICE $OLDSLICE" >> /cf/upgrade_log.txt
-	echo "TOFLASH $TOFLASH" >> /cf/upgrade_log.txt
-	echo "COMPLETE_PATH $COMPLETE_PATH" >> /cf/upgrade_log.txt
-	echo "GLABEL_SLICE $GLABEL_SLICE" >> /cf/upgrade_log.txt
+	echo "SLICE $SLICE" >> /conf/upgrade_log.txt
+	echo "OLDSLICE $OLDSLICE" >> /conf/upgrade_log.txt
+	echo "TOFLASH $TOFLASH" >> /conf/upgrade_log.txt
+	echo "COMPLETE_PATH $COMPLETE_PATH" >> /conf/upgrade_log.txt
+	echo "GLABEL_SLICE $GLABEL_SLICE" >> /conf/upgrade_log.txt
 
 	# Output environment information to log file
 	output_env_to_log
-
+	
+	# Grab a before upgrade look at fdisk
+	echo "" >> /conf/upgrade_log.txt
+	fdisk $BOOT_DRIVE >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
+	
 	# Log that we are really doing a NanoBSD upgrade
-	echo "" >> /cf/upgrade_log.txt
-	echo "NanoBSD upgrade starting" >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
+	echo "NanoBSD upgrade starting" >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 	
 	# Foot shooting is fun!
-	echo "" >> /cf/upgrade_log.txt
-	echo "/sbin/sysctl kern.geom.debugflags=16" >> /cf/upgrade_log.txt
-	/sbin/sysctl kern.geom.debugflags=16 >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "/sbin/sysctl kern.geom.debugflags=16" >> /conf/upgrade_log.txt
+	/sbin/sysctl kern.geom.debugflags=16 >> /conf/upgrade_log.txt 2>&1
 
 	# Remove TOFLASH and get ready for new flash image
-	echo "" >> /cf/upgrade_log.txt
-	echo "dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1" >> /cf/upgrade_log.txt	
-	dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1 >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1" >> /conf/upgrade_log.txt	
+	dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1 >> /conf/upgrade_log.txt 2>&1
 
 	# Stream gzipped image to dd and explode image to new area
-	echo "" >> /cf/upgrade_log.txt
-	echo "/usr/bin/gzcat $IMG | /bin/dd of=/dev/${TOFLASH} bs=16k" >> /cf/upgrade_log.txt
-	/usr/bin/gzcat $IMG | /bin/dd of=/dev/${TOFLASH} bs=16k >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "/usr/bin/gzcat $IMG | /bin/dd of=/dev/${TOFLASH} bs=16k" >> /conf/upgrade_log.txt
+	/usr/bin/gzcat $IMG | /bin/dd of=/dev/${TOFLASH} bs=16k >> /conf/upgrade_log.txt 2>&1
+
+	# Grab a after upgrade look at fdisk
+	echo "" >> /conf/upgrade_log.txt
+	fdisk $BOOT_DRIVE >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 	
 	# Ensure that our new system is sound and bail if it is not and file a notice
-	echo "" >> /cf/upgrade_log.txt
-	echo "/sbin/fsck_ffs -y /dev/$COMPLETE_PATH" >> /cf/upgrade_log.txt
-	/sbin/fsck_ffs -y /dev/$COMPLETE_PATH >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "/sbin/fsck_ffs -y /dev/$COMPLETE_PATH" >> /conf/upgrade_log.txt
+	/sbin/fsck_ffs -y /dev/$COMPLETE_PATH >> /conf/upgrade_log.txt 2>&1
 	if [ $? != 0 ]; then
 		file_notice "UpgradeFailure" "{\$g['product_name']} upgrade has failed.   Your system has been left in a usable state."
 		rm /var/run/firmwarelock.dirty
@@ -222,9 +232,9 @@ pfSenseNanoBSDupgrade)
 	fi
 
 	# Add back the corresponding glabel
-	echo "" >> /cf/upgrade_log.txt
-	echo "/sbin/tunefs -L ${GLABEL_SLICE} /dev/$COMPLETE_PATH" >> /cf/upgrade_log.txt
-	/sbin/tunefs -L ${GLABEL_SLICE} /dev/$COMPLETE_PATH >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "/sbin/tunefs -L ${GLABEL_SLICE} /dev/$COMPLETE_PATH" >> /conf/upgrade_log.txt
+	/sbin/tunefs -L ${GLABEL_SLICE} /dev/$COMPLETE_PATH >> /conf/upgrade_log.txt 2>&1
 
 	# restore config
 	cp -p /tmp/configbak/* /conf 2>/dev/null
@@ -239,7 +249,7 @@ pfSenseNanoBSDupgrade)
 	# If /tmp/$GLABEL_SLICE/tmp/post_upgrade_command exists 
 	# after update then execute the command.
 	if [ -f /tmp/$GLABEL_SLICE/tmp/post_upgrade_command ]; then
-		sh /tmp/$GLABEL_SLICE/tmp/post_upgrade_command >> /cf/upgrade_log.txt 2>&1
+		sh /tmp/$GLABEL_SLICE/tmp/post_upgrade_command >> /conf/upgrade_log.txt 2>&1
 	fi
 
 	# Update fstab
@@ -253,42 +263,46 @@ pfSenseNanoBSDupgrade)
 		/etc/rc.conf_mount_ro
 		exit 1
 	fi
-	echo "" >> /cf/upgrade_log.txt
-	cat /tmp/$GLABEL_SLICE/etc/fstab >> /cf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
+	cat /tmp/$GLABEL_SLICE/etc/fstab >> /conf/upgrade_log.txt
 
 	# Unmount newly prepared slice
 	umount /tmp/$GLABEL_SLICE
 
 	# Set active mount slice in fdisk
-	echo "" >> /cf/upgrade_log.txt
-	echo "gpart set -a active -i ${SLICE} ${BOOT_DRIVE}" >> /cf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
+	echo "gpart set -a active -i ${SLICE} ${BOOT_DRIVE}" >> /conf/upgrade_log.txt
 	gpart set -a active -i ${SLICE} ${BOOT_DRIVE}
 
 	# Set active boot source
-	echo "" >> /cf/upgrade_log.txt
-	echo "/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE}" >> /cf/upgrade_log.txt
-	/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE} >> /cf/upgrade_log.txt 2>&1
+	echo "" >> /conf/upgrade_log.txt
+	echo "/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE}" >> /conf/upgrade_log.txt
+	/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE} >> /conf/upgrade_log.txt 2>&1
+
+	# Grab a final look at fdisk
+	echo "" >> /conf/upgrade_log.txt
+	fdisk $BOOT_DRIVE >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
 	# Remove extra stuff
 	rm -rf /etc/rc.conf
 	rm -rf /etc/motd
 	rm -rf /usr/savecore/*
 
-	date >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	date >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
 	# Trigger a package reinstallation on reobot
 	touch /conf/needs_package_sync
 
+	# Enough fun for now.
+	echo "" >> /conf/upgrade_log.txt
+	echo "/sbin/sysctl kern.geom.debugflags=0" >> /conf/upgrade_log.txt
+	/sbin/sysctl kern.geom.debugflags=0 >> /conf/upgrade_log.txt 2>&1
+
 	# remount /cf ro
 	/etc/rc.conf_mount_ro
 	/bin/sync
-	echo "Done." >> /cf/upgrade_log.txt 2>&1
-
-	# Enough fun for now.
-	echo "" >> /cf/upgrade_log.txt
-	echo "/sbin/sysctl kern.geom.debugflags=0" >> /cf/upgrade_log.txt
-	/sbin/sysctl kern.geom.debugflags=0 >> /cf/upgrade_log.txt 2>&1
 
 	sleep 10
 
@@ -300,7 +314,7 @@ pfSenseupgrade)
 
 	# Sanity check - bail early if there's no firmware file!
 	if [ ! -r $IMG ]; then
-		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /cf/upgrade_log.txt 2>&1
+		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /conf/upgrade_log.txt 2>&1
 		/etc/rc.conf_mount_ro
 		exit
 	fi
@@ -309,14 +323,14 @@ pfSenseupgrade)
 	sleep 1
 
 	# Log that we are really doing a NanoBSD upgrade
-	echo "" >> /cf/upgrade_log.txt
-	echo "NanoBSD upgrade starting" >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
+	echo "NanoBSD upgrade starting" >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
 	touch /var/run/firmwarelock.dirty
 
-	touch /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	touch /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
 	# Output environment information to log file
 	output_env_to_log
@@ -326,12 +340,12 @@ pfSenseupgrade)
 
 	# Do we have a pre-upgrade hook in the update file?
 	if [ `tar tvzf $IMG | grep /tmp/pre_upgrade_command | wc -l` -gt 0 ]; then 
-		tar xzvf $IMG -C / ./tmp/pre_upgrade_command >> /cf/upgrade_log.txt 2>&1
-		chmod a+rx /tmp/pre_upgrade_command >> /cf/upgrade_log.txt 2>&1
-		sh /tmp/pre_upgrade_command >> /cf/upgrade_log.txt 2>&1
+		tar xzvf $IMG -C / ./tmp/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
+		chmod a+rx /tmp/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
+		sh /tmp/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
 	fi
 
-	echo "Firmware upgrade in progress..."  >> /cf/upgrade_log.txt 2>&1
+	echo "Firmware upgrade in progress..."  >> /conf/upgrade_log.txt 2>&1
 	echo "Firmware upgrade in progress..."  | wall
 
 	# backup config
@@ -339,20 +353,20 @@ pfSenseupgrade)
 	cp -p /conf/* /tmp/configbak 2>/dev/null
 
 	# tar explode image onto hd
-	echo "Installing $IMG." >> /cf/upgrade_log.txt 2>&1
-	cd / && /usr/bin/tar xzUPf $IMG >> /cf/upgrade_log.txt 2>&1
+	echo "Installing $IMG." >> /conf/upgrade_log.txt 2>&1
+	cd / && /usr/bin/tar xzUPf $IMG >> /conf/upgrade_log.txt 2>&1
 	/usr/bin/find / -name CVS -exec rm -fr {} \;
-	echo "Image installed $IMG." >> /cf/upgrade_log.txt 2>&1
+	echo "Image installed $IMG." >> /conf/upgrade_log.txt 2>&1
 
     # process custom image if its passed
     if [ $# -eq 3 ]; then
 	    if [ -f $CUSTOMIMG ]; then
-	        echo "Custom image $CUSTOMIMG found." >> /cf/upgrade_log.txt 2>&1
-	        echo "Custom image ($CUSTOMIMG) found." >> /cf/upgrade_log.txt 2>&1
+	        echo "Custom image $CUSTOMIMG found." >> /conf/upgrade_log.txt 2>&1
+	        echo "Custom image ($CUSTOMIMG) found." >> /conf/upgrade_log.txt 2>&1
 	        PWD_DIR=`pwd`
-	        cd / && /usr/bin/tar xzPUf $CUSTOMIMG >> /cf/upgrade_log.txt 2>&1
+	        cd / && /usr/bin/tar xzPUf $CUSTOMIMG >> /conf/upgrade_log.txt 2>&1
 	        cd $PWD_DIR
-	        echo "Custom image $CUSTOMIMG installed." >> /cf/upgrade_log.txt 2>&1
+	        echo "Custom image $CUSTOMIMG installed." >> /conf/upgrade_log.txt 2>&1
 	    fi
     fi
 
@@ -369,13 +383,13 @@ pfSenseupgrade)
 	rm -f $IMG
 
 	if [ -e /etc/init_bootloader.sh ]; then
-		sh /etc/init_bootloader.sh >> /cf/upgrade_log.txt 2>&1
+		sh /etc/init_bootloader.sh >> /conf/upgrade_log.txt 2>&1
 	fi
 
 	# If /tmp/post_upgrade_command exists after update
 	# then execute the command.
 	if [ -f /tmp/post_upgrade_command ]; then
-		sh /tmp/post_upgrade_command >> /cf/upgrade_log.txt 2>&1
+		sh /tmp/post_upgrade_command >> /conf/upgrade_log.txt 2>&1
 	fi
 
 	# remove unused files
@@ -383,8 +397,8 @@ pfSenseupgrade)
 	rm -rf /etc/motd
 	rm -rf /usr/savecore/*
 
-	date >> /cf/upgrade_log.txt
-	echo "" >> /cf/upgrade_log.txt
+	date >> /conf/upgrade_log.txt
+	echo "" >> /conf/upgrade_log.txt
 
 	# remount /cf ro
 	/etc/rc.conf_mount_ro