Handle ethernet hotplug events correctly

1 files changed, 9 insertions, 143 deletions

diff --git a/etc/devd.conf b/etc/devd.conf
index 7246357..ae15b75 100644
--- a/etc/devd.conf
+++ b/etc/devd.conf
@@ -1,132 +1,48 @@
 # $Id$
 # $FreeBSD: src/etc/devd.conf,v 1.26.2.1 2005/09/03 22:49:22 sam Exp $
-#
-# Refer to devd.conf(5) and devd(8) man pages for the details on how to
-# run and configure devd.
-#
-
-# NB: All regular expressions have an implicit ^$ around them.
-# NB: device-name is shorthand for 'match device-name'
 
 options {
-	# Each directory directive adds a directory the list of directories
-	# that we scan for files.  Files are read-in in the order that they
-	# are returned from readdir(3).  The rule-sets are combined to
-	# create a DFA that's used to match events to actions.
 	directory "/etc/devd";
-	directory "/usr/local/etc/devd";
 	pid-file "/var/run/devd.pid";
-
-	# Setup some shorthand for regex that we use later in the file.
-	#XXX Yes, these are gross -- imp
 	set scsi-controller-regex
 		"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
 		esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
 		[0-9]+";
 };
 
-# Note that the attach/detach with the highest value wins, so that one can
-# override these general rules.
-
-#
-# For ethernet like devices start configuring the interface.  Due to
-# a historical accident, this script is called pccard_ether.
-#
+# Handle ethernet linkup and linkdown
 attach 0 {
 	media-type "ethernet";
-	action "/sbin/dhclient $device-name";
+	action "/etc/rc.linkup $device-name start";
 };
 
 detach 0 {
 	media-type "ethernet";
-	action "/sbin/ifconfig $device-name delete && /usr/sbin/arp -da";
+	action "/etc/rc.linkup $device-name stop";
 };
 
-#
-# Try to start dhclient on Ethernet like interfaces when the link comes
-# up.  Only devices that are configured to support DHCP will actually
-# run it.  No link down rule exists because dhclient automaticly exits
-# when the link goes down.
-#
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_UP";
-	media-type		"ethernet";
-	action "/sbin/dhclient $device-name";
-};
-
-#
-# Like Ethernet devices, but separate because
-# they have a different media type.  We may want
-# to exploit this later.
-#
+# Handle wireless linkup and linkdown
 detach 0 {
 	media-type "802.11";
-	action "/sbin/ifconfig $device-name delete && /usr/sbin/arp -da";
+	action "/etc/rc.linkup $device-name start";
 };
+
 attach 0 {
 	media-type "802.11";
-	action "/sbin/dhclient $device-name";
-};
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_UP";
-	media-type		"802.11";
-	action "/sbin/dhclient $device-name";
-};
-
-# An entry like this might be in a different file, but is included here
-# as an example of how to override things.  Normally 'ed50' would match
-# the above attach/detach stuff, but the value of 100 makes it
-# hard wired to 1.2.3.4.
-attach 100 {
-	device-name "ed50";
-	action "/sbin/ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
-};
-detach 100 {
-	device-name "ed50";
+	action "/etc/rc.linkup $device-name stop";
 };
 
 # When a USB keyboard arrives, attach it as the console keyboard.
 attach 100 {
 	device-name "ukbd0";
-	action "kbdcontrol -k /dev/ukbd0 < /dev/console && /etc/rc.d/syscons restart";
+	action "kbdcontrol -k /dev/ukbd0 < /dev/console";
 };
+
 detach 100 {
 	device-name "ukbd0";
 	action "kbdcontrol -k /dev/kbd0 < /dev/console";
 };
 
-# The entry below starts moused when a mouse is plugged in. Moused
-# stops automatically (actually it bombs :) when the device disappears.
-attach 100 {
-	device-name "ums[0-9]+";
-	action "/etc/rc.d/moused start $device-name";
-};
-
-#
-# Rescan scsi device-names on attach, but not detach.  However, it is
-# disabled by default due to reports of problems.
-#
-attach 0 {
-	device-name "$scsi-controller-regex";
-//	action "camcontrol rescan all";
-};
-
-# Don't even try to second guess what to do about drivers that don't
-# match here.  Instead, pass it off to syslog.  Commented out for the
-# moment, as pnpinfo isn't set in devd yet.
-nomatch 0 {
-#	action "logger Unknown device: $pnpinfo $location $bus";
-};
-
-# Switch power profiles when the AC line state changes.
-#notify 10 {
-#	match "system"		"ACPI";
-#	match "subsystem"	"ACAD";
-#	action "/etc/rc.d/power_profile $notify";
-#};
-
 # Notify all users before beginning emergency shutdown when we get
 # a _CRT or _HOT thermal event and we're going to power down the system
 # very soon.
@@ -137,53 +53,3 @@ notify 10 {
 	action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
 };
 
-/* EXAMPLES TO END OF FILE
-
-# The following might be an example of something that a vendor might
-# install if you were to add their device.  This might reside in
-# /usr/local/etc/devd/deqna.conf.  A deqna is, in this hypothetical
-# example, a pccard ethernet-like device.  Students of history may
-# know other devices by this name, and will get the in-jokes in this
-# entry.
-nomatch 10 {
-	match "bus" "pccard[0-9]+";
-	match "manufacturer" "0x1234";
-	match "product" "0x2323";
-	action "kldload if_deqna";
-};
-attach 10 {
-	device-name "deqna[0-9]+";
-	action "/sbin/dhclient $device-name";
-};
-detach 10 {
-	device-name "deqna[0-9]+";
-	action "/sbin/ifconfig $device-name delete && /usr/sbin/arp -da";
-};
-
-# Examples of notify hooks.  A notify is a generic way for a kernel
-# subsystem to send event notification to userland.
-#
-# Here are some examples of ACPI notify handlers.  ACPI subsystems that
-# generate notifies include the AC adapter, power/sleep buttons,
-# control method batteries, lid switch, and thermal zones.
-#
-# Information returned is not always the same as the ACPI notify
-# events.  See the ACPI specification for more information about
-# notifies.  Here is the information returned for each subsystem:
-#
-# ACAD:		AC line state (0 is offline, 1 is online)
-# Button:	Button pressed (0 for power, 1 for sleep)
-# CMBAT:	ACPI battery events
-# Lid:		Lid state (0 is closed, 1 is open)
-# Thermal:	ACPI thermal zone events
-#
-# This example calls a script when the AC state changes, passing the
-# notify value as the first argument.  If the state is 0x00, it might
-# call some sysctls to implement economy mode.  If 0x01, it might set
-# the mode to performance.
-#notify 10 {
-#	match "system"		"ACPI";
-#	match "subsystem"	"ACAD";
-#	action			"/etc/acpi_ac $notify";
-#};
-*/