summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-lh7a40x/registers.h
blob: b4f09b3e2d0376564308474a5987123f219bdb44 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
/* include/asm-arm/arch-lh7a40x/registers.h
 *
 *  Copyright (C) 2004 Coastal Environmental Systems
 *  Copyright (C) 2004 Logic Product Development
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  version 2 as published by the Free Software Foundation.
 *
 */

#include <asm/arch/constants.h>

#ifndef __ASM_ARCH_REGISTERS_H
#define __ASM_ARCH_REGISTERS_H


	/* Physical register base addresses */

#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
#define USB_PHYS	(0x80000200)	/* USB Client */
#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */

	/* Physical registers of the LH7A404 */

#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */

/*#define KBD_PHYS	(0x80000e00) */
/*#define LCDICP_PHYS	(0x80001000) */


	/* Clock/State Controller register */

#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */

#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)

#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
#define CSC_PWRSR_CHIPID_SHIFT	(16)
#define CSC_PWRSR_CHIPID_MASK	(0xff)

#define CSC_USBDRESET_APBRESETREG	(1<<1)
#define CSC_USBDRESET_IORESETREG	(1<<0)

	/* Interrupt Controller registers */

#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */


	/* Vectored Interrupted Controller registers */

#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)

#define VIC_CNTL_ENABLE	(0x20)

	/* USB Host registers (Open HCI compatible) */

#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)


	/* GPIO registers */

#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
#define GPIO_PED	__REG(GPIO_PHYS + 0x20)


	/* Static Memory Controller registers */

#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */


#ifdef CONFIG_MACH_KEV7A400
# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */

#endif

#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)

# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
# define CPLD_FLASH		__REG16(CPLD10_PHYS)
# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
# define CPLD_REVISION		__REG16(CPLD14_PHYS)
# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)

#endif

	/* Timer registers */

#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */

#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */

#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */

#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */

#define TIMER_C_ENABLE		(1<<7)
#define TIMER_C_PERIODIC	(1<<6)
#define TIMER_C_FREERUNNING	(0)
#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
#define TIMER_C_508KHZ		(0x08)

	/* GPIO registers */

#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */


#endif  /* _ASM_ARCH_REGISTERS_H */
OpenPOWER on IntegriCloud