summaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-pcf2123.c
blob: 1725b5090e33d1ea8a768c07f65302f0b61831d7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
/*
 * An SPI driver for the Philips PCF2123 RTC
 * Copyright 2009 Cyber Switching, Inc.
 *
 * Author: Chris Verges <chrisv@cyberswitching.com>
 * Maintainers: http://www.cyberswitching.com
 *
 * based on the RS5C348 driver in this same directory.
 *
 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
 * the sysfs contributions to this driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Please note that the CS is active high, so platform data
 * should look something like:
 *
 * static struct spi_board_info ek_spi_devices[] = {
 *	...
 *	{
 *		.modalias		= "rtc-pcf2123",
 *		.chip_select		= 1,
 *		.controller_data	= (void *)AT91_PIN_PA10,
 *		.max_speed_hz		= 1000 * 1000,
 *		.mode			= SPI_CS_HIGH,
 *		.bus_num		= 0,
 *	},
 *	...
 *};
 *
 */

#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/sysfs.h>

#define DRV_VERSION "0.6"

#define PCF2123_REG_CTRL1	(0x00)	/* Control Register 1 */
#define PCF2123_REG_CTRL2	(0x01)	/* Control Register 2 */
#define PCF2123_REG_SC		(0x02)	/* datetime */
#define PCF2123_REG_MN		(0x03)
#define PCF2123_REG_HR		(0x04)
#define PCF2123_REG_DM		(0x05)
#define PCF2123_REG_DW		(0x06)
#define PCF2123_REG_MO		(0x07)
#define PCF2123_REG_YR		(0x08)

#define PCF2123_SUBADDR		(1 << 4)
#define PCF2123_WRITE		((0 << 7) | PCF2123_SUBADDR)
#define PCF2123_READ		((1 << 7) | PCF2123_SUBADDR)

static struct spi_driver pcf2123_driver;

struct pcf2123_sysfs_reg {
	struct device_attribute attr;
	char name[2];
};

struct pcf2123_plat_data {
	struct rtc_device *rtc;
	struct pcf2123_sysfs_reg regs[16];
};

/*
 * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
 * is released properly after an SPI write.  This function should be
 * called after EVERY read/write call over SPI.
 */
static inline void pcf2123_delay_trec(void)
{
	ndelay(30);
}

static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
			    char *buffer)
{
	struct spi_device *spi = to_spi_device(dev);
	struct pcf2123_sysfs_reg *r;
	u8 txbuf[1], rxbuf[1];
	unsigned long reg;
	int ret;

	r = container_of(attr, struct pcf2123_sysfs_reg, attr);

	ret = kstrtoul(r->name, 16, &reg);
	if (ret)
		return ret;

	txbuf[0] = PCF2123_READ | reg;
	ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
	if (ret < 0)
		return -EIO;
	pcf2123_delay_trec();
	return sprintf(buffer, "0x%x\n", rxbuf[0]);
}

static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
			     const char *buffer, size_t count) {
	struct spi_device *spi = to_spi_device(dev);
	struct pcf2123_sysfs_reg *r;
	u8 txbuf[2];
	unsigned long reg;
	unsigned long val;

	int ret;

	r = container_of(attr, struct pcf2123_sysfs_reg, attr);

	ret = kstrtoul(r->name, 16, &reg);
	if (ret)
		return ret;

	ret = kstrtoul(buffer, 10, &val);
	if (ret)
		return ret;

	txbuf[0] = PCF2123_WRITE | reg;
	txbuf[1] = val;
	ret = spi_write(spi, txbuf, sizeof(txbuf));
	if (ret < 0)
		return -EIO;
	pcf2123_delay_trec();
	return count;
}

static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
	struct spi_device *spi = to_spi_device(dev);
	u8 txbuf[1], rxbuf[7];
	int ret;

	txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
			rxbuf, sizeof(rxbuf));
	if (ret < 0)
		return ret;
	pcf2123_delay_trec();

	tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
	tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
	tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
	tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
	tm->tm_wday = rxbuf[4] & 0x07;
	tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
	tm->tm_year = bcd2bin(rxbuf[6]);
	if (tm->tm_year < 70)
		tm->tm_year += 100;	/* assume we are in 1970...2069 */

	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
			"mday=%d, mon=%d, year=%d, wday=%d\n",
			__func__,
			tm->tm_sec, tm->tm_min, tm->tm_hour,
			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	/* the clock can give out invalid datetime, but we cannot return
	 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
	 */
	if (rtc_valid_tm(tm) < 0)
		dev_err(dev, "retrieved date/time is not valid.\n");

	return 0;
}

static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
	struct spi_device *spi = to_spi_device(dev);
	u8 txbuf[8];
	int ret;

	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
			"mday=%d, mon=%d, year=%d, wday=%d\n",
			__func__,
			tm->tm_sec, tm->tm_min, tm->tm_hour,
			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	/* Stop the counter first */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
	txbuf[1] = 0x20;
	ret = spi_write(spi, txbuf, 2);
	if (ret < 0)
		return ret;
	pcf2123_delay_trec();

	/* Set the new time */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
	txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
	txbuf[5] = tm->tm_wday & 0x07;
	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);

	ret = spi_write(spi, txbuf, sizeof(txbuf));
	if (ret < 0)
		return ret;
	pcf2123_delay_trec();

	/* Start the counter */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
	txbuf[1] = 0x00;
	ret = spi_write(spi, txbuf, 2);
	if (ret < 0)
		return ret;
	pcf2123_delay_trec();

	return 0;
}

static const struct rtc_class_ops pcf2123_rtc_ops = {
	.read_time	= pcf2123_rtc_read_time,
	.set_time	= pcf2123_rtc_set_time,
};

static int pcf2123_probe(struct spi_device *spi)
{
	struct rtc_device *rtc;
	struct pcf2123_plat_data *pdata;
	u8 txbuf[2], rxbuf[2];
	int ret, i;

	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
				GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;
	spi->dev.platform_data = pdata;

	/* Send a software reset command */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
	txbuf[1] = 0x58;
	dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
			txbuf[0], txbuf[1]);
	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
	if (ret < 0)
		goto kfree_exit;
	pcf2123_delay_trec();

	/* Stop the counter */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
	txbuf[1] = 0x20;
	dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
			txbuf[0], txbuf[1]);
	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
	if (ret < 0)
		goto kfree_exit;
	pcf2123_delay_trec();

	/* See if the counter was actually stopped */
	txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
	dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
			txbuf[0]);
	ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
					rxbuf, 2 * sizeof(u8));
	dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
			rxbuf[0], rxbuf[1]);
	if (ret < 0)
		goto kfree_exit;
	pcf2123_delay_trec();

	if (!(rxbuf[0] & 0x20)) {
		dev_err(&spi->dev, "chip not found\n");
		ret = -ENODEV;
		goto kfree_exit;
	}

	dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
	dev_info(&spi->dev, "spiclk %u KHz.\n",
			(spi->max_speed_hz + 500) / 1000);

	/* Start the counter */
	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
	txbuf[1] = 0x00;
	ret = spi_write(spi, txbuf, sizeof(txbuf));
	if (ret < 0)
		goto kfree_exit;
	pcf2123_delay_trec();

	/* Finalize the initialization */
	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
			&pcf2123_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&spi->dev, "failed to register.\n");
		ret = PTR_ERR(rtc);
		goto kfree_exit;
	}

	pdata->rtc = rtc;

	for (i = 0; i < 16; i++) {
		sysfs_attr_init(&pdata->regs[i].attr.attr);
		sprintf(pdata->regs[i].name, "%1x", i);
		pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
		pdata->regs[i].attr.attr.name = pdata->regs[i].name;
		pdata->regs[i].attr.show = pcf2123_show;
		pdata->regs[i].attr.store = pcf2123_store;
		ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
		if (ret) {
			dev_err(&spi->dev, "Unable to create sysfs %s\n",
				pdata->regs[i].name);
			goto sysfs_exit;
		}
	}

	return 0;

sysfs_exit:
	for (i--; i >= 0; i--)
		device_remove_file(&spi->dev, &pdata->regs[i].attr);

kfree_exit:
	spi->dev.platform_data = NULL;
	return ret;
}

static int pcf2123_remove(struct spi_device *spi)
{
	struct pcf2123_plat_data *pdata = spi->dev.platform_data;
	int i;

	if (pdata) {
		for (i = 0; i < 16; i++)
			if (pdata->regs[i].name[0])
				device_remove_file(&spi->dev,
						   &pdata->regs[i].attr);
	}

	return 0;
}

static struct spi_driver pcf2123_driver = {
	.driver	= {
			.name	= "rtc-pcf2123",
			.owner	= THIS_MODULE,
	},
	.probe	= pcf2123_probe,
	.remove	= pcf2123_remove,
};

module_spi_driver(pcf2123_driver);

MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
OpenPOWER on IntegriCloud