summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/da9055-regulator.c
blob: 30221099d09c4d09bc3f406c94e5fa089dadc5b8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
/*
* Regulator driver for DA9055 PMIC
*
* Copyright(c) 2012 Dialog Semiconductor Ltd.
*
* Author: David Dajun Chen <dchen@diasemi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>

#include <linux/mfd/da9055/core.h>
#include <linux/mfd/da9055/reg.h>
#include <linux/mfd/da9055/pdata.h>

#define DA9055_MIN_UA		0
#define DA9055_MAX_UA		3

#define DA9055_LDO_MODE_SYNC	0
#define DA9055_LDO_MODE_SLEEP	1

#define DA9055_BUCK_MODE_SLEEP	1
#define DA9055_BUCK_MODE_SYNC	2
#define DA9055_BUCK_MODE_AUTO	3

/* DA9055 REGULATOR IDs */
#define DA9055_ID_BUCK1	0
#define DA9055_ID_BUCK2	1
#define DA9055_ID_LDO1		2
#define DA9055_ID_LDO2		3
#define DA9055_ID_LDO3		4
#define DA9055_ID_LDO4		5
#define DA9055_ID_LDO5		6
#define DA9055_ID_LDO6		7

/* DA9055 BUCK current limit */
static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };

struct da9055_conf_reg {
	int reg;
	int sel_mask;
	int en_mask;
};

struct da9055_volt_reg {
	int reg_a;
	int reg_b;
	int sl_shift;
	int v_mask;
};

struct da9055_mode_reg {
	int reg;
	int mask;
	int shift;
};

struct da9055_regulator_info {
	struct regulator_desc reg_desc;
	struct da9055_conf_reg conf;
	struct da9055_volt_reg volt;
	struct da9055_mode_reg mode;
};

struct da9055_regulator {
	struct da9055 *da9055;
	struct da9055_regulator_info *info;
	struct regulator_dev *rdev;
	enum gpio_select reg_rselect;
};

static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int ret, mode = 0;

	ret = da9055_reg_read(regulator->da9055, info->mode.reg);
	if (ret < 0)
		return ret;

	switch ((ret & info->mode.mask) >> info->mode.shift) {
	case DA9055_BUCK_MODE_SYNC:
		mode = REGULATOR_MODE_FAST;
		break;
	case DA9055_BUCK_MODE_AUTO:
		mode = REGULATOR_MODE_NORMAL;
		break;
	case DA9055_BUCK_MODE_SLEEP:
		mode = REGULATOR_MODE_STANDBY;
		break;
	}

	return mode;
}

static int da9055_buck_set_mode(struct regulator_dev *rdev,
					unsigned int mode)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int val = 0;

	switch (mode) {
	case REGULATOR_MODE_FAST:
		val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
		break;
	case REGULATOR_MODE_NORMAL:
		val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
		break;
	case REGULATOR_MODE_STANDBY:
		val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
		break;
	}

	return da9055_reg_update(regulator->da9055, info->mode.reg,
				 info->mode.mask, val);
}

static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int ret;

	ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
	if (ret < 0)
		return ret;

	if (ret >> info->volt.sl_shift)
		return REGULATOR_MODE_STANDBY;
	else
		return REGULATOR_MODE_NORMAL;
}

static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	struct da9055_volt_reg volt = info->volt;
	int val = 0;

	switch (mode) {
	case REGULATOR_MODE_NORMAL:
	case REGULATOR_MODE_FAST:
		val = DA9055_LDO_MODE_SYNC;
		break;
	case REGULATOR_MODE_STANDBY:
		val = DA9055_LDO_MODE_SLEEP;
		break;
	}

	return da9055_reg_update(regulator->da9055, volt.reg_b,
				 1 << volt.sl_shift,
				 val << volt.sl_shift);
}

static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int ret;

	ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
	if (ret < 0)
		return ret;

	ret &= info->mode.mask;
	return da9055_current_limits[ret >> info->mode.shift];
}

static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
					 int max_uA)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int i;

	for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
		if ((min_uA <= da9055_current_limits[i]) &&
		    (da9055_current_limits[i] <= max_uA))
			return da9055_reg_update(regulator->da9055,
						 DA9055_REG_BUCK_LIM,
						 info->mode.mask,
						 i << info->mode.shift);
	}

	return -EINVAL;
}

static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	struct da9055_volt_reg volt = info->volt;
	int ret, sel;

	/*
	 * There are two voltage register set A & B for voltage ramping but
	 * either one of then can be active therefore we first determine
	 * the active register set.
	 */
	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
	if (ret < 0)
		return ret;

	ret &= info->conf.sel_mask;

	/* Get the voltage for the active register set A/B */
	if (ret == DA9055_REGUALTOR_SET_A)
		ret = da9055_reg_read(regulator->da9055, volt.reg_a);
	else
		ret = da9055_reg_read(regulator->da9055, volt.reg_b);

	if (ret < 0)
		return ret;

	sel = (ret & volt.v_mask);
	return sel;
}

static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
					    unsigned int selector)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int ret;

	/*
	 * Regulator register set A/B is not selected through GPIO therefore
	 * we use default register set A for voltage ramping.
	 */
	if (regulator->reg_rselect == NO_GPIO) {
		/* Select register set A */
		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
					info->conf.sel_mask, DA9055_SEL_REG_A);
		if (ret < 0)
			return ret;

		/* Set the voltage */
		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
					 info->volt.v_mask, selector);
	}

	/*
	 * Here regulator register set A/B is selected through GPIO.
	 * Therefore we first determine the selected register set A/B and
	 * then set the desired voltage for that register set A/B.
	 */
	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
	if (ret < 0)
		return ret;

	ret &= info->conf.sel_mask;

	/* Set the voltage */
	if (ret == DA9055_REGUALTOR_SET_A)
		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
					 info->volt.v_mask, selector);
	else
		return da9055_reg_update(regulator->da9055, info->volt.reg_b,
					 info->volt.v_mask, selector);
}

static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
						int uV)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;
	int ret;

	/* Select register set B for suspend voltage ramping. */
	if (regulator->reg_rselect == NO_GPIO) {
		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
					info->conf.sel_mask, DA9055_SEL_REG_B);
		if (ret < 0)
			return ret;
	}

	ret = regulator_map_voltage_linear(rdev, uV, uV);
	if (ret < 0)
		return ret;

	return da9055_reg_update(regulator->da9055, info->volt.reg_b,
				 info->volt.v_mask, ret);
}

static int da9055_suspend_enable(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;

	/* Select register set B for voltage ramping. */
	if (regulator->reg_rselect == NO_GPIO)
		return da9055_reg_update(regulator->da9055, info->conf.reg,
					info->conf.sel_mask, DA9055_SEL_REG_B);
	else
		return 0;
}

static int da9055_suspend_disable(struct regulator_dev *rdev)
{
	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
	struct da9055_regulator_info *info = regulator->info;

	/* Diselect register set B. */
	if (regulator->reg_rselect == NO_GPIO)
		return da9055_reg_update(regulator->da9055, info->conf.reg,
					info->conf.sel_mask, DA9055_SEL_REG_A);
	else
		return 0;
}

static struct regulator_ops da9055_buck_ops = {
	.get_mode = da9055_buck_get_mode,
	.set_mode = da9055_buck_set_mode,

	.get_current_limit = da9055_buck_get_current_limit,
	.set_current_limit = da9055_buck_set_current_limit,

	.get_voltage_sel = da9055_regulator_get_voltage_sel,
	.set_voltage_sel = da9055_regulator_set_voltage_sel,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.is_enabled = regulator_is_enabled_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,

	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
	.set_suspend_enable = da9055_suspend_enable,
	.set_suspend_disable = da9055_suspend_disable,
	.set_suspend_mode = da9055_buck_set_mode,
};

static struct regulator_ops da9055_ldo_ops = {
	.get_mode = da9055_ldo_get_mode,
	.set_mode = da9055_ldo_set_mode,

	.get_voltage_sel = da9055_regulator_get_voltage_sel,
	.set_voltage_sel = da9055_regulator_set_voltage_sel,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.is_enabled = regulator_is_enabled_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,

	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
	.set_suspend_enable = da9055_suspend_enable,
	.set_suspend_disable = da9055_suspend_disable,
	.set_suspend_mode = da9055_ldo_set_mode,

};

#define DA9055_LDO(_id, step, min, max, vbits, voffset) \
{\
	.reg_desc = {\
		.name = #_id,\
		.ops = &da9055_ldo_ops,\
		.type = REGULATOR_VOLTAGE,\
		.id = DA9055_ID_##_id,\
		.n_voltages = (max - min) / step + 1 + (voffset), \
		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
		.enable_mask = 1, \
		.min_uV = (min) * 1000,\
		.uV_step = (step) * 1000,\
		.linear_min_sel = (voffset),\
		.owner = THIS_MODULE,\
	},\
	.conf = {\
		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
		.sel_mask = (1 << 4),\
		.en_mask = 1,\
	},\
	.volt = {\
		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
		.sl_shift = 7,\
		.v_mask = (1 << (vbits)) - 1,\
	},\
}

#define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
{\
	.reg_desc = {\
		.name = #_id,\
		.ops = &da9055_buck_ops,\
		.type = REGULATOR_VOLTAGE,\
		.id = DA9055_ID_##_id,\
		.n_voltages = (max - min) / step + 1 + (voffset), \
		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
		.enable_mask = 1,\
		.min_uV = (min) * 1000,\
		.uV_step = (step) * 1000,\
		.linear_min_sel = (voffset),\
		.owner = THIS_MODULE,\
	},\
	.conf = {\
		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
		.sel_mask = (1 << 4),\
		.en_mask = 1,\
	},\
	.volt = {\
		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
		.sl_shift = 7,\
		.v_mask = (1 << (vbits)) - 1,\
	},\
	.mode = {\
		.reg = DA9055_REG_BCORE_MODE,\
		.mask = (mbits),\
		.shift = (sbits),\
	},\
}

static struct da9055_regulator_info da9055_regulator_info[] = {
	DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
	DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
	DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
	DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
	DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
	DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
	DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
	DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
};

/*
 * Configures regulator to be controlled either through GPIO 1 or 2.
 * GPIO can control regulator state and/or select the regulator register
 * set A/B for voltage ramping.
 */
static int da9055_gpio_init(struct da9055_regulator *regulator,
			    struct regulator_config *config,
			    struct da9055_pdata *pdata, int id)
{
	struct da9055_regulator_info *info = regulator->info;
	int ret = 0;

	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
		char name[18];
		int gpio_mux = pdata->gpio_ren[id];

		config->ena_gpio = pdata->ena_gpio[id];
		config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
		config->ena_gpio_invert = 1;

		/*
		 * GPI pin is muxed with regulator to control the
		 * regulator state.
		 */
		sprintf(name, "DA9055 GPI %d", gpio_mux);
		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
					    name);
		if (ret < 0)
			goto err;

		/*
		 * Let the regulator know that its state is controlled
		 * through GPI.
		 */
		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
					DA9055_E_GPI_MASK,
					pdata->reg_ren[id]
					<< DA9055_E_GPI_SHIFT);
		if (ret < 0)
			goto err;
	}

	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
		char name[18];
		int gpio_mux = pdata->gpio_rsel[id];

		regulator->reg_rselect = pdata->reg_rsel[id];

		/*
		 * GPI pin is muxed with regulator to select the
		 * regulator register set A/B for voltage ramping.
		 */
		sprintf(name, "DA9055 GPI %d", gpio_mux);
		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
					    name);
		if (ret < 0)
			goto err;

		/*
		 * Let the regulator know that its register set A/B
		 * will be selected through GPI for voltage ramping.
		 */
		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
					DA9055_V_GPI_MASK,
					pdata->reg_rsel[id]
					<< DA9055_V_GPI_SHIFT);
	}

err:
	return ret;
}

static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
{
	struct da9055_regulator *regulator = data;

	regulator_notifier_call_chain(regulator->rdev,
				      REGULATOR_EVENT_OVER_CURRENT, NULL);

	return IRQ_HANDLED;
}

static inline struct da9055_regulator_info *find_regulator_info(int id)
{
	struct da9055_regulator_info *info;
	int i;

	for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
		info = &da9055_regulator_info[i];
		if (info->reg_desc.id == id)
			return info;
	}

	return NULL;
}

static int da9055_regulator_probe(struct platform_device *pdev)
{
	struct regulator_config config = { };
	struct da9055_regulator *regulator;
	struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
	struct da9055_pdata *pdata = da9055->dev->platform_data;
	int ret, irq;

	if (pdata == NULL || pdata->regulators[pdev->id] == NULL)
		return -ENODEV;

	regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
				 GFP_KERNEL);
	if (!regulator)
		return -ENOMEM;

	regulator->info = find_regulator_info(pdev->id);
	if (regulator->info == NULL) {
		dev_err(&pdev->dev, "invalid regulator ID specified\n");
		return -EINVAL;
	}

	regulator->da9055 = da9055;
	config.dev = &pdev->dev;
	config.driver_data = regulator;
	config.regmap = da9055->regmap;

	if (pdata && pdata->regulators)
		config.init_data = pdata->regulators[pdev->id];

	ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
	if (ret < 0)
		return ret;

	regulator->rdev = regulator_register(&regulator->info->reg_desc,
					     &config);
	if (IS_ERR(regulator->rdev)) {
		dev_err(&pdev->dev, "Failed to register regulator %s\n",
			regulator->info->reg_desc.name);
		ret = PTR_ERR(regulator->rdev);
		return ret;
	}

	/* Only LDO 5 and 6 has got the over current interrupt */
	if (pdev->id == DA9055_ID_LDO5 || pdev->id ==  DA9055_ID_LDO6) {
		irq = platform_get_irq_byname(pdev, "REGULATOR");
		irq = regmap_irq_get_virq(da9055->irq_data, irq);
		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
						da9055_ldo5_6_oc_irq,
						IRQF_TRIGGER_HIGH |
						IRQF_ONESHOT |
						IRQF_PROBE_SHARED,
						pdev->name, regulator);
		if (ret != 0) {
			if (ret != -EBUSY) {
				dev_err(&pdev->dev,
				"Failed to request Regulator IRQ %d: %d\n",
				irq, ret);
				goto err_regulator;
			}
		}
	}

	platform_set_drvdata(pdev, regulator);

	return 0;

err_regulator:
	regulator_unregister(regulator->rdev);
	return ret;
}

static int da9055_regulator_remove(struct platform_device *pdev)
{
	struct da9055_regulator *regulator = platform_get_drvdata(pdev);

	regulator_unregister(regulator->rdev);

	return 0;
}

static struct platform_driver da9055_regulator_driver = {
	.probe = da9055_regulator_probe,
	.remove = da9055_regulator_remove,
	.driver = {
		.name = "da9055-regulator",
		.owner = THIS_MODULE,
	},
};

static int __init da9055_regulator_init(void)
{
	return platform_driver_register(&da9055_regulator_driver);
}
subsys_initcall(da9055_regulator_init);

static void __exit da9055_regulator_exit(void)
{
	platform_driver_unregister(&da9055_regulator_driver);
}
module_exit(da9055_regulator_exit);

MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9055-regulator");
OpenPOWER on IntegriCloud