summaryrefslogtreecommitdiffstats
path: root/drivers/phy/phy-qcom-apq8064-sata.c
blob: 7b3ddfb6589802e5862a81d9f97a0854b4093c66 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
/*
 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/time.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>

/* PHY registers */
#define UNIPHY_PLL_REFCLK_CFG		0x000
#define UNIPHY_PLL_PWRGEN_CFG		0x014
#define UNIPHY_PLL_GLB_CFG		0x020
#define UNIPHY_PLL_SDM_CFG0		0x038
#define UNIPHY_PLL_SDM_CFG1		0x03C
#define UNIPHY_PLL_SDM_CFG2		0x040
#define UNIPHY_PLL_SDM_CFG3		0x044
#define UNIPHY_PLL_SDM_CFG4		0x048
#define UNIPHY_PLL_SSC_CFG0		0x04C
#define UNIPHY_PLL_SSC_CFG1		0x050
#define UNIPHY_PLL_SSC_CFG2		0x054
#define UNIPHY_PLL_SSC_CFG3		0x058
#define UNIPHY_PLL_LKDET_CFG0		0x05C
#define UNIPHY_PLL_LKDET_CFG1		0x060
#define UNIPHY_PLL_LKDET_CFG2		0x064
#define UNIPHY_PLL_CAL_CFG0		0x06C
#define UNIPHY_PLL_CAL_CFG8		0x08C
#define UNIPHY_PLL_CAL_CFG9		0x090
#define UNIPHY_PLL_CAL_CFG10		0x094
#define UNIPHY_PLL_CAL_CFG11		0x098
#define UNIPHY_PLL_STATUS		0x0C0

#define SATA_PHY_SER_CTRL		0x100
#define SATA_PHY_TX_DRIV_CTRL0		0x104
#define SATA_PHY_TX_DRIV_CTRL1		0x108
#define SATA_PHY_TX_IMCAL0		0x11C
#define SATA_PHY_TX_IMCAL2		0x124
#define SATA_PHY_RX_IMCAL0		0x128
#define SATA_PHY_EQUAL			0x13C
#define SATA_PHY_OOB_TERM		0x144
#define SATA_PHY_CDR_CTRL0		0x148
#define SATA_PHY_CDR_CTRL1		0x14C
#define SATA_PHY_CDR_CTRL2		0x150
#define SATA_PHY_CDR_CTRL3		0x154
#define SATA_PHY_PI_CTRL0		0x168
#define SATA_PHY_POW_DWN_CTRL0		0x180
#define SATA_PHY_POW_DWN_CTRL1		0x184
#define SATA_PHY_TX_DATA_CTRL		0x188
#define SATA_PHY_ALIGNP			0x1A4
#define SATA_PHY_TX_IMCAL_STAT		0x1E4
#define SATA_PHY_RX_IMCAL_STAT		0x1E8

#define UNIPHY_PLL_LOCK		BIT(0)
#define SATA_PHY_TX_CAL		BIT(0)
#define SATA_PHY_RX_CAL		BIT(0)

/* default timeout set to 1 sec */
#define TIMEOUT_MS		10000
#define DELAY_INTERVAL_US	100

struct qcom_apq8064_sata_phy {
	void __iomem *mmio;
	struct clk *cfg_clk;
	struct device *dev;
};

/* Helper function to do poll and timeout */
static int read_poll_timeout(void __iomem *addr, u32 mask)
{
	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);

	do {
		if (readl_relaxed(addr) & mask)
			return 0;

		 usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
	} while (!time_after(jiffies, timeout));

	return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
}

static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
{
	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
	void __iomem *base = phy->mmio;
	int ret = 0;

	/* SATA phy initialization */
	writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
	writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
	/* Make sure the power down happens before power up */
	mb();
	usleep_range(10, 60);

	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
	writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);

	/* Write UNIPHYPLL registers to configure PLL */
	writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
	writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);

	writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
	writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
	writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
	writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
	writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);

	writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
	writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
	writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
	writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
	writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);

	writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
	writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
	writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
	writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);

	writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
	writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);

	writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
	/* make sure global config LDO power down happens before power up */
	mb();

	writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
	writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);

	/* PLL Lock wait */
	ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
	if (ret) {
		dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
		return ret;
	}

	/* TX Calibration */
	ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
	if (ret) {
		dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
		return ret;
	}

	/* RX Calibration */
	ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
	if (ret) {
		dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
		return ret;
	}

	/* SATA phy calibrated succesfully, power up to functional mode */
	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);

	writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
	writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
	writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
	writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);

	writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
	writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
	writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);

	writel_relaxed(0x01, base + SATA_PHY_EQUAL);
	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);

	return 0;
}

static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
{
	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
	void __iomem *base = phy->mmio;

	/* Power down PHY */
	writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
	writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);

	/* Power down PLL block */
	writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);

	return 0;
}

static struct phy_ops qcom_apq8064_sata_phy_ops = {
	.init		= qcom_apq8064_sata_phy_init,
	.exit		= qcom_apq8064_sata_phy_exit,
	.owner		= THIS_MODULE,
};

static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
{
	struct qcom_apq8064_sata_phy *phy;
	struct device *dev = &pdev->dev;
	struct resource *res;
	struct phy_provider *phy_provider;
	struct phy *generic_phy;
	int ret;

	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
	if (!phy)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	phy->mmio = devm_ioremap_resource(dev, res);
	if (IS_ERR(phy->mmio))
		return PTR_ERR(phy->mmio);

	generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops,
				      NULL);
	if (IS_ERR(generic_phy)) {
		dev_err(dev, "%s: failed to create phy\n", __func__);
		return PTR_ERR(generic_phy);
	}

	phy->dev = dev;
	phy_set_drvdata(generic_phy, phy);
	platform_set_drvdata(pdev, phy);

	phy->cfg_clk = devm_clk_get(dev, "cfg");
	if (IS_ERR(phy->cfg_clk)) {
		dev_err(dev, "Failed to get sata cfg clock\n");
		return PTR_ERR(phy->cfg_clk);
	}

	ret = clk_prepare_enable(phy->cfg_clk);
	if (ret)
		return ret;

	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
	if (IS_ERR(phy_provider)) {
		clk_disable_unprepare(phy->cfg_clk);
		dev_err(dev, "%s: failed to register phy\n", __func__);
		return PTR_ERR(phy_provider);
	}

	return 0;
}

static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
{
	struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);

	clk_disable_unprepare(phy->cfg_clk);

	return 0;
}

static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
	{ .compatible = "qcom,apq8064-sata-phy" },
	{ },
};
MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);

static struct platform_driver qcom_apq8064_sata_phy_driver = {
	.probe	= qcom_apq8064_sata_phy_probe,
	.remove	= qcom_apq8064_sata_phy_remove,
	.driver = {
		.name	= "qcom-apq8064-sata-phy",
		.of_match_table	= qcom_apq8064_sata_phy_of_match,
	}
};
module_platform_driver(qcom_apq8064_sata_phy_driver);

MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
MODULE_LICENSE("GPL v2");
OpenPOWER on IntegriCloud