summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/marvell-ccic/mmp-driver.c
blob: 0ed9b3adfcdf4e26b11f50801d133b3566813458 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
/*
 * Support for the camera device found on Marvell MMP processors; known
 * to work with the Armada 610 as used in the OLPC 1.75 system.
 *
 * Copyright 2011 Jonathan Corbet <corbet@lwn.net>
 *
 * This file may be distributed under the terms of the GNU General
 * Public License, version 2.
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/mmp-camera.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/pm.h>
#include <linux/clk.h>

#include "mcam-core.h"

MODULE_ALIAS("platform:mmp-camera");
MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_LICENSE("GPL");

static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"};

struct mmp_camera {
	void *power_regs;
	struct platform_device *pdev;
	struct mcam_camera mcam;
	struct list_head devlist;
	struct clk *mipi_clk;
	int irq;
};

static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam)
{
	return container_of(mcam, struct mmp_camera, mcam);
}

/*
 * A silly little infrastructure so we can keep track of our devices.
 * Chances are that we will never have more than one of them, but
 * the Armada 610 *does* have two controllers...
 */

static LIST_HEAD(mmpcam_devices);
static struct mutex mmpcam_devices_lock;

static void mmpcam_add_device(struct mmp_camera *cam)
{
	mutex_lock(&mmpcam_devices_lock);
	list_add(&cam->devlist, &mmpcam_devices);
	mutex_unlock(&mmpcam_devices_lock);
}

static void mmpcam_remove_device(struct mmp_camera *cam)
{
	mutex_lock(&mmpcam_devices_lock);
	list_del(&cam->devlist);
	mutex_unlock(&mmpcam_devices_lock);
}

/*
 * Platform dev remove passes us a platform_device, and there's
 * no handy unused drvdata to stash a backpointer in.  So just
 * dig it out of our list.
 */
static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
{
	struct mmp_camera *cam;

	mutex_lock(&mmpcam_devices_lock);
	list_for_each_entry(cam, &mmpcam_devices, devlist) {
		if (cam->pdev == pdev) {
			mutex_unlock(&mmpcam_devices_lock);
			return cam;
		}
	}
	mutex_unlock(&mmpcam_devices_lock);
	return NULL;
}




/*
 * Power-related registers; this almost certainly belongs
 * somewhere else.
 *
 * ARMADA 610 register manual, sec 7.2.1, p1842.
 */
#define CPU_SUBSYS_PMU_BASE	0xd4282800
#define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
#define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
#define REG_CCIC2_CRCR		0xf4	/* CCIC2 clk reset ctrl reg	*/

static void mcam_clk_enable(struct mcam_camera *mcam)
{
	unsigned int i;

	for (i = 0; i < NR_MCAM_CLK; i++) {
		if (!IS_ERR(mcam->clk[i]))
			clk_prepare_enable(mcam->clk[i]);
	}
}

static void mcam_clk_disable(struct mcam_camera *mcam)
{
	int i;

	for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
		if (!IS_ERR(mcam->clk[i]))
			clk_disable_unprepare(mcam->clk[i]);
	}
}

/*
 * Power control.
 */
static void mmpcam_power_up_ctlr(struct mmp_camera *cam)
{
	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
	mdelay(1);
}

static int mmpcam_power_up(struct mcam_camera *mcam)
{
	struct mmp_camera *cam = mcam_to_cam(mcam);
	struct mmp_camera_platform_data *pdata;

/*
 * Turn on power and clocks to the controller.
 */
	mmpcam_power_up_ctlr(cam);
/*
 * Provide power to the sensor.
 */
	mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
	pdata = cam->pdev->dev.platform_data;
	gpio_set_value(pdata->sensor_power_gpio, 1);
	mdelay(5);
	mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
	gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
	mdelay(5);
	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
	mdelay(5);

	mcam_clk_enable(mcam);

	return 0;
}

static void mmpcam_power_down(struct mcam_camera *mcam)
{
	struct mmp_camera *cam = mcam_to_cam(mcam);
	struct mmp_camera_platform_data *pdata;
/*
 * Turn off clocks and set reset lines
 */
	iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
	iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
/*
 * Shut down the sensor.
 */
	pdata = cam->pdev->dev.platform_data;
	gpio_set_value(pdata->sensor_power_gpio, 0);
	gpio_set_value(pdata->sensor_reset_gpio, 0);

	mcam_clk_disable(mcam);
}

void mcam_ctlr_reset(struct mcam_camera *mcam)
{
	unsigned long val;
	struct mmp_camera *cam = mcam_to_cam(mcam);

	if (mcam->ccic_id) {
		/*
		 * Using CCIC2
		 */
		val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
		iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
	} else {
		/*
		 * Using CCIC1
		 */
		val = ioread32(cam->power_regs + REG_CCIC_CRCR);
		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
		iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
	}
}

/*
 * calc the dphy register values
 * There are three dphy registers being used.
 * dphy[0] - CSI2_DPHY3
 * dphy[1] - CSI2_DPHY5
 * dphy[2] - CSI2_DPHY6
 * CSI2_DPHY3 and CSI2_DPHY6 can be set with a default value
 * or be calculated dynamically
 */
void mmpcam_calc_dphy(struct mcam_camera *mcam)
{
	struct mmp_camera *cam = mcam_to_cam(mcam);
	struct mmp_camera_platform_data *pdata = cam->pdev->dev.platform_data;
	struct device *dev = &cam->pdev->dev;
	unsigned long tx_clk_esc;

	/*
	 * If CSI2_DPHY3 is calculated dynamically,
	 * pdata->lane_clk should be already set
	 * either in the board driver statically
	 * or in the sensor driver dynamically.
	 */
	/*
	 * dphy[0] - CSI2_DPHY3:
	 *  bit 0 ~ bit 7: HS Term Enable.
	 *   defines the time that the DPHY
	 *   wait before enabling the data
	 *   lane termination after detecting
	 *   that the sensor has driven the data
	 *   lanes to the LP00 bridge state.
	 *   The value is calculated by:
	 *   (Max T(D_TERM_EN)/Period(DDR)) - 1
	 *  bit 8 ~ bit 15: HS_SETTLE
	 *   Time interval during which the HS
	 *   receiver shall ignore any Data Lane
	 *   HS transistions.
	 *   The vaule has been calibrated on
	 *   different boards. It seems to work well.
	 *
	 *  More detail please refer
	 *  MIPI Alliance Spectification for D-PHY
	 *  document for explanation of HS-SETTLE
	 *  and D-TERM-EN.
	 */
	switch (pdata->dphy3_algo) {
	case DPHY3_ALGO_PXA910:
		/*
		 * Calculate CSI2_DPHY3 algo for PXA910
		 */
		pdata->dphy[0] =
			(((1 + (pdata->lane_clk * 80) / 1000) & 0xff) << 8)
			| (1 + pdata->lane_clk * 35 / 1000);
		break;
	case DPHY3_ALGO_PXA2128:
		/*
		 * Calculate CSI2_DPHY3 algo for PXA2128
		 */
		pdata->dphy[0] =
			(((2 + (pdata->lane_clk * 110) / 1000) & 0xff) << 8)
			| (1 + pdata->lane_clk * 35 / 1000);
		break;
	default:
		/*
		 * Use default CSI2_DPHY3 value for PXA688/PXA988
		 */
		dev_dbg(dev, "camera: use the default CSI2_DPHY3 value\n");
	}

	/*
	 * mipi_clk will never be changed, it is a fixed value on MMP
	 */
	if (IS_ERR(cam->mipi_clk))
		return;

	/* get the escape clk, this is hard coded */
	clk_prepare_enable(cam->mipi_clk);
	tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12;
	clk_disable_unprepare(cam->mipi_clk);
	/*
	 * dphy[2] - CSI2_DPHY6:
	 * bit 0 ~ bit 7: CK Term Enable
	 *  Time for the Clock Lane receiver to enable the HS line
	 *  termination. The value is calculated similarly with
	 *  HS Term Enable
	 * bit 8 ~ bit 15: CK Settle
	 *  Time interval during which the HS receiver shall ignore
	 *  any Clock Lane HS transitions.
	 *  The value is calibrated on the boards.
	 */
	pdata->dphy[2] =
		((((534 * tx_clk_esc) / 2000 - 1) & 0xff) << 8)
		| (((38 * tx_clk_esc) / 1000 - 1) & 0xff);

	dev_dbg(dev, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n",
		pdata->dphy[0], pdata->dphy[1], pdata->dphy[2]);
}

static irqreturn_t mmpcam_irq(int irq, void *data)
{
	struct mcam_camera *mcam = data;
	unsigned int irqs, handled;

	spin_lock(&mcam->dev_lock);
	irqs = mcam_reg_read(mcam, REG_IRQSTAT);
	handled = mccic_irq(mcam, irqs);
	spin_unlock(&mcam->dev_lock);
	return IRQ_RETVAL(handled);
}

static void mcam_init_clk(struct mcam_camera *mcam)
{
	unsigned int i;

	for (i = 0; i < NR_MCAM_CLK; i++) {
		if (mcam_clks[i] != NULL) {
			/* Some clks are not necessary on some boards
			 * We still try to run even it fails getting clk
			 */
			mcam->clk[i] = devm_clk_get(mcam->dev, mcam_clks[i]);
			if (IS_ERR(mcam->clk[i]))
				dev_warn(mcam->dev, "Could not get clk: %s\n",
						mcam_clks[i]);
		}
	}
}

static int mmpcam_probe(struct platform_device *pdev)
{
	struct mmp_camera *cam;
	struct mcam_camera *mcam;
	struct resource *res;
	struct mmp_camera_platform_data *pdata;
	int ret;

	pdata = pdev->dev.platform_data;
	if (!pdata)
		return -ENODEV;

	cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL);
	if (cam == NULL)
		return -ENOMEM;
	cam->pdev = pdev;
	INIT_LIST_HEAD(&cam->devlist);

	mcam = &cam->mcam;
	mcam->plat_power_up = mmpcam_power_up;
	mcam->plat_power_down = mmpcam_power_down;
	mcam->ctlr_reset = mcam_ctlr_reset;
	mcam->calc_dphy = mmpcam_calc_dphy;
	mcam->dev = &pdev->dev;
	mcam->use_smbus = 0;
	mcam->ccic_id = pdev->id;
	mcam->mclk_min = pdata->mclk_min;
	mcam->mclk_src = pdata->mclk_src;
	mcam->mclk_div = pdata->mclk_div;
	mcam->bus_type = pdata->bus_type;
	mcam->dphy = pdata->dphy;
	if (mcam->bus_type == V4L2_MBUS_CSI2) {
		cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
		if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
			return PTR_ERR(cam->mipi_clk);
	}
	mcam->mipi_enabled = false;
	mcam->lane = pdata->lane;
	mcam->chip_id = MCAM_ARMADA610;
	mcam->buffer_mode = B_DMA_sg;
	spin_lock_init(&mcam->dev_lock);
	/*
	 * Get our I/O memory.
	 */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	mcam->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(mcam->regs))
		return PTR_ERR(mcam->regs);
	mcam->regs_size = resource_size(res);
	/*
	 * Power/clock memory is elsewhere; get it too.  Perhaps this
	 * should really be managed outside of this driver?
	 */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(cam->power_regs))
		return PTR_ERR(cam->power_regs);
	/*
	 * Find the i2c adapter.  This assumes, of course, that the
	 * i2c bus is already up and functioning.
	 */
	mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
	if (mcam->i2c_adapter == NULL) {
		dev_err(&pdev->dev, "No i2c adapter\n");
		return -ENODEV;
	}
	/*
	 * Sensor GPIO pins.
	 */
	ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio,
							"cam-power");
	if (ret) {
		dev_err(&pdev->dev, "Can't get sensor power gpio %d",
				pdata->sensor_power_gpio);
		return ret;
	}
	gpio_direction_output(pdata->sensor_power_gpio, 0);
	ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio,
							"cam-reset");
	if (ret) {
		dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
				pdata->sensor_reset_gpio);
		return ret;
	}
	gpio_direction_output(pdata->sensor_reset_gpio, 0);

	mcam_init_clk(mcam);

	/*
	 * Power the device up and hand it off to the core.
	 */
	ret = mmpcam_power_up(mcam);
	if (ret)
		return ret;
	ret = mccic_register(mcam);
	if (ret)
		goto out_power_down;
	/*
	 * Finally, set up our IRQ now that the core is ready to
	 * deal with it.
	 */
	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (res == NULL) {
		ret = -ENODEV;
		goto out_unregister;
	}
	cam->irq = res->start;
	ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
					"mmp-camera", mcam);
	if (ret == 0) {
		mmpcam_add_device(cam);
		return 0;
	}

out_unregister:
	mccic_shutdown(mcam);
out_power_down:
	mmpcam_power_down(mcam);
	return ret;
}


static int mmpcam_remove(struct mmp_camera *cam)
{
	struct mcam_camera *mcam = &cam->mcam;

	mmpcam_remove_device(cam);
	mccic_shutdown(mcam);
	mmpcam_power_down(mcam);
	return 0;
}

static int mmpcam_platform_remove(struct platform_device *pdev)
{
	struct mmp_camera *cam = mmpcam_find_device(pdev);

	if (cam == NULL)
		return -ENODEV;
	return mmpcam_remove(cam);
}

/*
 * Suspend/resume support.
 */
#ifdef CONFIG_PM

static int mmpcam_suspend(struct platform_device *pdev, pm_message_t state)
{
	struct mmp_camera *cam = mmpcam_find_device(pdev);

	if (state.event != PM_EVENT_SUSPEND)
		return 0;
	mccic_suspend(&cam->mcam);
	return 0;
}

static int mmpcam_resume(struct platform_device *pdev)
{
	struct mmp_camera *cam = mmpcam_find_device(pdev);

	/*
	 * Power up unconditionally just in case the core tries to
	 * touch a register even if nothing was active before; trust
	 * me, it's better this way.
	 */
	mmpcam_power_up_ctlr(cam);
	return mccic_resume(&cam->mcam);
}

#endif


static struct platform_driver mmpcam_driver = {
	.probe		= mmpcam_probe,
	.remove		= mmpcam_platform_remove,
#ifdef CONFIG_PM
	.suspend	= mmpcam_suspend,
	.resume		= mmpcam_resume,
#endif
	.driver = {
		.name	= "mmp-camera",
	}
};


static int __init mmpcam_init_module(void)
{
	mutex_init(&mmpcam_devices_lock);
	return platform_driver_register(&mmpcam_driver);
}

static void __exit mmpcam_exit_module(void)
{
	platform_driver_unregister(&mmpcam_driver);
	/*
	 * platform_driver_unregister() should have emptied the list
	 */
	if (!list_empty(&mmpcam_devices))
		printk(KERN_ERR "mmp_camera leaving devices behind\n");
}

module_init(mmpcam_init_module);
module_exit(mmpcam_exit_module);
OpenPOWER on IntegriCloud