summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/ttpci/budget.c
blob: bc4ce7559cbe93ee301b3fcd006a264357c46a68 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
/*
 * budget.c: driver for the SAA7146 based Budget DVB cards
 *
 * Compiled from various sources by Michael Hunold <michael@mihu.de>
 *
 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
 *
 * Copyright (C) 1999-2002 Ralph  Metzler
 *                       & Marcus Metzler for convergence integrated media GmbH
 *
 * 26feb2004 Support for FS Activy Card (Grundig tuner) by
 *           Michael Dreher <michael@5dot1.de>,
 *           Oliver Endriss <o.endriss@gmx.de> and
 *           Andreas 'randy' Weinberger
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
 * the project's page is at http://www.linuxtv.org/dvb/
 */

#include "budget.h"
#include "stv0299.h"
#include "ves1x93.h"
#include "ves1820.h"
#include "l64781.h"
#include "tda8083.h"
#include "s5h1420.h"

static void Set22K (struct budget *budget, int state)
{
	struct saa7146_dev *dev=budget->dev;
	dprintk(2, "budget: %p\n", budget);
	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
}

/* Diseqc functions only for TT Budget card */
/* taken from the Skyvision DVB driver by
   Ralph Metzler <rjkm@metzlerbros.de> */

static void DiseqcSendBit (struct budget *budget, int data)
{
	struct saa7146_dev *dev=budget->dev;
	dprintk(2, "budget: %p\n", budget);

	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
	udelay(data ? 500 : 1000);
	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
	udelay(data ? 1000 : 500);
}

static void DiseqcSendByte (struct budget *budget, int data)
{
	int i, par=1, d;

	dprintk(2, "budget: %p\n", budget);

	for (i=7; i>=0; i--) {
		d = (data>>i)&1;
		par ^= d;
		DiseqcSendBit(budget, d);
	}

	DiseqcSendBit(budget, par);
}

static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
{
	struct saa7146_dev *dev=budget->dev;
	int i;

	dprintk(2, "budget: %p\n", budget);

	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
	mdelay(16);

	for (i=0; i<len; i++)
		DiseqcSendByte(budget, msg[i]);

	mdelay(16);

	if (burst!=-1) {
		if (burst)
			DiseqcSendByte(budget, 0xff);
		else {
			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
			udelay(12500);
			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
		}
		msleep(20);
	}

	return 0;
}

/*
 *   Routines for the Fujitsu Siemens Activy budget card
 *   22 kHz tone and DiSEqC are handled by the frontend.
 *   Voltage must be set here.
 */
static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
{
	struct saa7146_dev *dev=budget->dev;

	dprintk(2, "budget: %p\n", budget);

	switch (voltage) {
		case SEC_VOLTAGE_13:
			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
			break;
		case SEC_VOLTAGE_18:
			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
			break;
		default:
			return -EINVAL;
	}

	return 0;
}

static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;

	return SetVoltage_Activy (budget, voltage);
}

static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;

	switch (tone) {
	case SEC_TONE_ON:
		Set22K (budget, 1);
		break;

	case SEC_TONE_OFF:
		Set22K (budget, 0);
		break;

	default:
		return -EINVAL;
	}

	return 0;
}

static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;

	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);

	return 0;
}

static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;

	SendDiSEqCMsg (budget, 0, NULL, minicmd);

	return 0;
}

static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u8 buf;
	struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;

	switch(voltage) {
	case SEC_VOLTAGE_13:
		buf = (buf & 0xf7) | 0x04;
		break;

	case SEC_VOLTAGE_18:
		buf = (buf & 0xf7) | 0x0c;
		break;

	case SEC_VOLTAGE_OFF:
		buf = buf & 0xf0;
		break;
	}

	msg.flags = 0;
	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;

	return 0;
}

static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u8 buf;
	struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;

	if (arg) {
		buf = buf | 0x10;
	} else {
		buf = buf & 0xef;
	}

	msg.flags = 0;
	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;

	return 0;
}

static int lnbp21_init(struct budget* budget)
{
	u8 buf = 0x00;
	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
		return -EIO;
	return 0;
}

static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u8 pwr = 0;
	u8 buf[4];
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
	u32 div = (params->frequency + 479500) / 125;

	if (params->frequency > 2000000) pwr = 3;
	else if (params->frequency > 1800000) pwr = 2;
	else if (params->frequency > 1600000) pwr = 1;
	else if (params->frequency > 1200000) pwr = 0;
	else if (params->frequency >= 1100000) pwr = 1;
	else pwr = 2;

	buf[0] = (div >> 8) & 0x7f;
	buf[1] = div & 0xff;
	buf[2] = ((div & 0x18000) >> 10) | 0x95;
	buf[3] = (pwr << 6) | 0x30;

        // NOTE: since we're using a prescaler of 2, we set the
	// divisor frequency to 62.5kHz and divide by 125 above

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
	return 0;
}

static struct ves1x93_config alps_bsrv2_config =
{
	.demod_address = 0x08,
	.xin = 90100000UL,
	.invert_pwm = 0,
	.pll_set = alps_bsrv2_pll_set,
};

static u8 alps_bsru6_inittab[] = {
	0x01, 0x15,
	0x02, 0x00,
	0x03, 0x00,
	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
	0x06, 0x40,   /* DAC not used, set to high impendance mode */
	0x07, 0x00,   /* DAC LSB */
	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
	0x09, 0x00,   /* FIFO */
	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
	0x10, 0x3f,   // AGC2  0x3d
	0x11, 0x84,
	0x12, 0xb9,
	0x15, 0xc9,   // lock detector threshold
	0x16, 0x00,
	0x17, 0x00,
	0x18, 0x00,
	0x19, 0x00,
	0x1a, 0x00,
	0x1f, 0x50,
	0x20, 0x00,
	0x21, 0x00,
	0x22, 0x00,
	0x23, 0x00,
	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
	0x29, 0x1e,  // 1/2 threshold
	0x2a, 0x14,  // 2/3 threshold
	0x2b, 0x0f,  // 3/4 threshold
	0x2c, 0x09,  // 5/6 threshold
	0x2d, 0x05,  // 7/8 threshold
	0x2e, 0x01,
	0x31, 0x1f,  // test all FECs
	0x32, 0x19,  // viterbi and synchro search
	0x33, 0xfc,  // rs control
	0x34, 0x93,  // error control
	0x0f, 0x52,
	0xff, 0xff
};

static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
{
	u8 aclk = 0;
	u8 bclk = 0;

	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }

	stv0299_writereg (fe, 0x13, aclk);
	stv0299_writereg (fe, 0x14, bclk);
	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);

	return 0;
}

static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
{
	u8 data[4];
	u32 div;
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };

	if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;

	div = (params->frequency + (125 - 1)) / 125; // round correctly
	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
	data[3] = 0xC4;

	if (params->frequency > 1530000) data[3] = 0xc0;

	if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO;
	return 0;
}

static struct stv0299_config alps_bsru6_config = {

	.demod_address = 0x68,
	.inittab = alps_bsru6_inittab,
	.mclk = 88000000UL,
	.invert = 1,
	.skip_reinit = 0,
	.lock_output = STV0229_LOCKOUTPUT_1,
	.volt13_op0_op1 = STV0299_VOLT13_OP1,
	.min_delay_ms = 100,
	.set_symbol_rate = alps_bsru6_set_symbol_rate,
	.pll_set = alps_bsru6_pll_set,
};

static u8 alps_bsbe1_inittab[] = {
	0x01, 0x15,
	0x02, 0x30,
	0x03, 0x00,
	0x04, 0x7d,  /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
	0x05, 0x35,  /* I2CT = 0, SCLT = 1, SDAT = 1 */
	0x06, 0x40,  /* DAC not used, set to high impendance mode */
	0x07, 0x00,  /* DAC LSB */
	0x08, 0x40,  /* DiSEqC off, LNB power on OP2/LOCK pin on */
	0x09, 0x00,  /* FIFO */
	0x0c, 0x51,  /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
	0x0d, 0x82,  /* DC offset compensation = ON, beta_agc1 = 2 */
	0x0e, 0x23,  /* alpha_tmg = 2, beta_tmg = 3 */
	0x10, 0x3f,  // AGC2 0x3d
	0x11, 0x84,
	0x12, 0xb9,
	0x15, 0xc9,  // lock detector threshold
	0x16, 0x00,
	0x17, 0x00,
	0x18, 0x00,
	0x19, 0x00,
	0x1a, 0x00,
	0x1f, 0x50,
	0x20, 0x00,
	0x21, 0x00,
	0x22, 0x00,
	0x23, 0x00,
	0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
	0x29, 0x1e, // 1/2 threshold
	0x2a, 0x14, // 2/3 threshold
	0x2b, 0x0f, // 3/4 threshold
	0x2c, 0x09, // 5/6 threshold
	0x2d, 0x05, // 7/8 threshold
	0x2e, 0x01,
	0x31, 0x1f, // test all FECs
	0x32, 0x19, // viterbi and synchro search
	0x33, 0xfc, // rs control
	0x34, 0x93, // error control
	0x0f, 0x92, // 0x80 = inverse AGC
	0xff, 0xff
};

static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
{
	int ret;
	u8 data[4];
	u32 div;
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };

	if ((params->frequency < 950000) || (params->frequency > 2150000))
		return -EINVAL;

	div = (params->frequency + (125 - 1)) / 125; // round correctly
	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
	data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;

	ret = i2c_transfer(i2c, &msg, 1);
	return (ret != 1) ? -EIO : 0;
}

static struct stv0299_config alps_bsbe1_config = {
	.demod_address = 0x68,
	.inittab = alps_bsbe1_inittab,
	.mclk = 88000000UL,
	.invert = 1,
	.skip_reinit = 0,
	.min_delay_ms = 100,
	.set_symbol_rate = alps_bsru6_set_symbol_rate,
	.pll_set = alps_bsbe1_pll_set,
};

static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u32 div;
	u8 data[4];
	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };

	div = (params->frequency + 35937500 + 31250) / 62500;

	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = 0x85 | ((div >> 10) & 0x60);
	data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81);

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
	return 0;
}

static struct ves1820_config alps_tdbe2_config = {
	.demod_address = 0x09,
	.xin = 57840000UL,
	.invert = 1,
	.selagc = VES1820_SELAGC_SIGNAMPERR,
	.pll_set = alps_tdbe2_pll_set,
};

static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u32 div;
	u8 cfg, cpump, band_select;
	u8 data[4];
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };

	div = (36125000 + params->frequency) / 166666;

	cfg = 0x88;

	if (params->frequency < 175000000) cpump = 2;
	else if (params->frequency < 390000000) cpump = 1;
	else if (params->frequency < 470000000) cpump = 2;
	else if (params->frequency < 750000000) cpump = 1;
	else cpump = 3;

	if (params->frequency < 175000000) band_select = 0x0e;
	else if (params->frequency < 470000000) band_select = 0x05;
	else band_select = 0x03;

	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = ((div >> 10) & 0x60) | cfg;
	data[3] = (cpump << 6) | band_select;

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
	return 0;
}

static struct l64781_config grundig_29504_401_config = {
	.demod_address = 0x55,
	.pll_set = grundig_29504_401_pll_set,
};

static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u32 div;
	u8 data[4];
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };

	div = params->frequency / 125;
	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = 0x8e;
	data[3] = 0x00;

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
	return 0;
}

static struct tda8083_config grundig_29504_451_config = {
	.demod_address = 0x68,
	.pll_set = grundig_29504_451_pll_set,
};

static int s5h1420_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u32* freqout)
{
	struct budget* budget = (struct budget*) fe->dvb->priv;
	u32 div;
	u8 data[4];
	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };

	div = params->frequency / 1000;
	data[0] = (div >> 8) & 0x7f;
	data[1] = div & 0xff;
	data[2] = 0xc2;

	if (div < 1450)
		data[3] = 0x00;
	else if (div < 1850)
		data[3] = 0x40;
	else if (div < 2000)
		data[3] = 0x80;
	else
		data[3] = 0xc0;

	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;

	*freqout = div * 1000;
	return 0;
}

static struct s5h1420_config s5h1420_config = {
	.demod_address = 0x53,
	.invert = 1,
	.pll_set = s5h1420_pll_set,
};

static u8 read_pwm(struct budget* budget)
{
	u8 b = 0xff;
	u8 pwm;
	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
				 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };

        if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
		pwm = 0x48;

	return pwm;
}

static void frontend_init(struct budget *budget)
{
	switch(budget->dev->pci->subsystem_device) {
	case 0x1017:
		// try the ALPS BSBE1 now
		budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
			budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
			if (lnbp21_init(budget)) {
				printk("%s: No LNBP21 found!\n", __FUNCTION__);
				goto error_out;
			}
		}

		break;
	case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
	case 0x1013:
		// try the ALPS BSRV2 first of all
		budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
		        budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
			budget->dvb_frontend->ops->set_tone = budget_set_tone;
			break;
		}

		// try the ALPS BSRU6 now
		budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
			budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
			budget->dvb_frontend->ops->set_tone = budget_set_tone;
			break;
		}
		break;

	case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))

		budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
		if (budget->dvb_frontend) break;
		break;

	case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))

		budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap);
		if (budget->dvb_frontend) break;
		break;

	case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059))
		budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
			break;
		}
		break;

	case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
		budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
			break;
		}
		break;

	case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
		budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
		if (budget->dvb_frontend) {
			budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
			budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
			if (lnbp21_init(budget)) {
				printk("%s: No LNBP21 found!\n", __FUNCTION__);
				goto error_out;
			}
			break;
		}
	}

	if (budget->dvb_frontend == NULL) {
		printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
		       budget->dev->pci->vendor,
		       budget->dev->pci->device,
		       budget->dev->pci->subsystem_vendor,
		       budget->dev->pci->subsystem_device);
	} else {
		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
			goto error_out;
	}
	return;

error_out:
	printk("budget: Frontend registration failed!\n");
	if (budget->dvb_frontend->ops->release)
		budget->dvb_frontend->ops->release(budget->dvb_frontend);
	budget->dvb_frontend = NULL;
	return;
}

static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
{
	struct budget *budget = NULL;
	int err;

	budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
	if( NULL == budget ) {
		return -ENOMEM;
	}

	dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);

	dev->ext_priv = budget;

	if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
		printk("==> failed\n");
		kfree (budget);
		return err;
	}

	budget->dvb_adapter.priv = budget;
	frontend_init(budget);

	return 0;
}

static int budget_detach (struct saa7146_dev* dev)
{
	struct budget *budget = (struct budget*) dev->ext_priv;
	int err;

	if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);

	err = ttpci_budget_deinit (budget);

	kfree (budget);
	dev->ext_priv = NULL;

	return err;
}

static struct saa7146_extension budget_extension;

MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT);
MAKE_BUDGET_INFO(ttbs,	"TT-Budget/WinTV-NOVA-S  PCI",	BUDGET_TT);
MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
MAKE_BUDGET_INFO(satel,	"SATELCO Multimedia PCI",	BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);

static struct pci_device_id pci_tbl[] = {
	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1003),
	MAKE_EXTENSION_PCI(ttbc,  0x13c2, 0x1004),
	MAKE_EXTENSION_PCI(ttbt,  0x13c2, 0x1005),
	MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1016),
	MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
	MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
	{
		.vendor    = 0,
	}
};

MODULE_DEVICE_TABLE(pci, pci_tbl);

static struct saa7146_extension budget_extension = {
	.name		= "budget dvb\0",
	.flags		= SAA7146_I2C_SHORT_DELAY,

	.module		= THIS_MODULE,
	.pci_tbl	= pci_tbl,
	.attach		= budget_attach,
	.detach		= budget_detach,

	.irq_mask	= MASK_10,
	.irq_func	= ttpci_budget_irq10_handler,
};

static int __init budget_init(void)
{
	return saa7146_register_extension(&budget_extension);
}

static void __exit budget_exit(void)
{
	saa7146_unregister_extension(&budget_extension);
}

module_init(budget_init);
module_exit(budget_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
		   "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
OpenPOWER on IntegriCloud