summaryrefslogtreecommitdiffstats
path: root/drivers/fpga/zynq-fpga.c
blob: 34cb98139442dfb93a7de248105b799f0ab982f7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
/*
 * Copyright (c) 2011-2015 Xilinx Inc.
 * Copyright (c) 2015, National Instruments Corp.
 *
 * FPGA Manager Driver for Xilinx Zynq, heavily based on xdevcfg driver
 * in their vendor tree.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */

#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fpga/fpga-mgr.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/string.h>
#include <linux/scatterlist.h>

/* Offsets into SLCR regmap */

/* FPGA Software Reset Control */
#define SLCR_FPGA_RST_CTRL_OFFSET	0x240
/* Level Shifters Enable */
#define SLCR_LVL_SHFTR_EN_OFFSET	0x900

/* Constant Definitions */

/* Control Register */
#define CTRL_OFFSET			0x00
/* Lock Register */
#define LOCK_OFFSET			0x04
/* Interrupt Status Register */
#define INT_STS_OFFSET			0x0c
/* Interrupt Mask Register */
#define INT_MASK_OFFSET			0x10
/* Status Register */
#define STATUS_OFFSET			0x14
/* DMA Source Address Register */
#define DMA_SRC_ADDR_OFFSET		0x18
/* DMA Destination Address Reg */
#define DMA_DST_ADDR_OFFSET		0x1c
/* DMA Source Transfer Length */
#define DMA_SRC_LEN_OFFSET		0x20
/* DMA Destination Transfer */
#define DMA_DEST_LEN_OFFSET		0x24
/* Unlock Register */
#define UNLOCK_OFFSET			0x34
/* Misc. Control Register */
#define MCTRL_OFFSET			0x80

/* Control Register Bit definitions */

/* Signal to reset FPGA */
#define CTRL_PCFG_PROG_B_MASK		BIT(30)
/* Enable PCAP for PR */
#define CTRL_PCAP_PR_MASK		BIT(27)
/* Enable PCAP */
#define CTRL_PCAP_MODE_MASK		BIT(26)

/* Miscellaneous Control Register bit definitions */
/* Internal PCAP loopback */
#define MCTRL_PCAP_LPBK_MASK		BIT(4)

/* Status register bit definitions */

/* FPGA init status */
#define STATUS_DMA_Q_F			BIT(31)
#define STATUS_DMA_Q_E			BIT(30)
#define STATUS_PCFG_INIT_MASK		BIT(4)

/* Interrupt Status/Mask Register Bit definitions */
/* DMA command done */
#define IXR_DMA_DONE_MASK		BIT(13)
/* DMA and PCAP cmd done */
#define IXR_D_P_DONE_MASK		BIT(12)
 /* FPGA programmed */
#define IXR_PCFG_DONE_MASK		BIT(2)
#define IXR_ERROR_FLAGS_MASK		0x00F0C860
#define IXR_ALL_MASK			0xF8F7F87F

/* Miscellaneous constant values */

/* Invalid DMA addr */
#define DMA_INVALID_ADDRESS		GENMASK(31, 0)
/* Used to unlock the dev */
#define UNLOCK_MASK			0x757bdf0d
/* Timeout for polling reset bits */
#define INIT_POLL_TIMEOUT		2500000
/* Delay for polling reset bits */
#define INIT_POLL_DELAY			20
/* Signal this is the last DMA transfer, wait for the AXI and PCAP before
 * interrupting
 */
#define DMA_SRC_LAST_TRANSFER		1
/* Timeout for DMA completion */
#define DMA_TIMEOUT_MS			5000

/* Masks for controlling stuff in SLCR */
/* Disable all Level shifters */
#define LVL_SHFTR_DISABLE_ALL_MASK	0x0
/* Enable Level shifters from PS to PL */
#define LVL_SHFTR_ENABLE_PS_TO_PL	0xa
/* Enable Level shifters from PL to PS */
#define LVL_SHFTR_ENABLE_PL_TO_PS	0xf
/* Enable global resets */
#define FPGA_RST_ALL_MASK		0xf
/* Disable global resets */
#define FPGA_RST_NONE_MASK		0x0

struct zynq_fpga_priv {
	int irq;
	struct clk *clk;

	void __iomem *io_base;
	struct regmap *slcr;

	spinlock_t dma_lock;
	unsigned int dma_elm;
	unsigned int dma_nelms;
	struct scatterlist *cur_sg;

	struct completion dma_done;
};

static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
				   u32 val)
{
	writel(val, priv->io_base + offset);
}

static inline u32 zynq_fpga_read(const struct zynq_fpga_priv *priv,
				 u32 offset)
{
	return readl(priv->io_base + offset);
}

#define zynq_fpga_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
	readl_poll_timeout(priv->io_base + addr, val, cond, sleep_us, \
			   timeout_us)

/* Cause the specified irq mask bits to generate IRQs */
static inline void zynq_fpga_set_irq(struct zynq_fpga_priv *priv, u32 enable)
{
	zynq_fpga_write(priv, INT_MASK_OFFSET, ~enable);
}

/* Must be called with dma_lock held */
static void zynq_step_dma(struct zynq_fpga_priv *priv)
{
	u32 addr;
	u32 len;
	bool first;

	first = priv->dma_elm == 0;
	while (priv->cur_sg) {
		/* Feed the DMA queue until it is full. */
		if (zynq_fpga_read(priv, STATUS_OFFSET) & STATUS_DMA_Q_F)
			break;

		addr = sg_dma_address(priv->cur_sg);
		len = sg_dma_len(priv->cur_sg);
		if (priv->dma_elm + 1 == priv->dma_nelms) {
			/* The last transfer waits for the PCAP to finish too,
			 * notice this also changes the irq_mask to ignore
			 * IXR_DMA_DONE_MASK which ensures we do not trigger
			 * the completion too early.
			 */
			addr |= DMA_SRC_LAST_TRANSFER;
			priv->cur_sg = NULL;
		} else {
			priv->cur_sg = sg_next(priv->cur_sg);
			priv->dma_elm++;
		}

		zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, addr);
		zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, DMA_INVALID_ADDRESS);
		zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, len / 4);
		zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0);
	}

	/* Once the first transfer is queued we can turn on the ISR, future
	 * calls to zynq_step_dma will happen from the ISR context. The
	 * dma_lock spinlock guarentees this handover is done coherently, the
	 * ISR enable is put at the end to avoid another CPU spinning in the
	 * ISR on this lock.
	 */
	if (first && priv->cur_sg) {
		zynq_fpga_set_irq(priv,
				  IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK);
	} else if (!priv->cur_sg) {
		/* The last transfer changes to DMA & PCAP mode since we do
		 * not want to continue until everything has been flushed into
		 * the PCAP.
		 */
		zynq_fpga_set_irq(priv,
				  IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK);
	}
}

static irqreturn_t zynq_fpga_isr(int irq, void *data)
{
	struct zynq_fpga_priv *priv = data;
	u32 intr_status;

	/* If anything other than DMA completion is reported stop and hand
	 * control back to zynq_fpga_ops_write, something went wrong,
	 * otherwise progress the DMA.
	 */
	spin_lock(&priv->dma_lock);
	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
	if (!(intr_status & IXR_ERROR_FLAGS_MASK) &&
	    (intr_status & IXR_DMA_DONE_MASK) && priv->cur_sg) {
		zynq_fpga_write(priv, INT_STS_OFFSET, IXR_DMA_DONE_MASK);
		zynq_step_dma(priv);
		spin_unlock(&priv->dma_lock);
		return IRQ_HANDLED;
	}
	spin_unlock(&priv->dma_lock);

	zynq_fpga_set_irq(priv, 0);
	complete(&priv->dma_done);

	return IRQ_HANDLED;
}

/* Sanity check the proposed bitstream. It must start with the sync word in
 * the correct byte order, and be dword aligned. The input is a Xilinx .bin
 * file with every 32 bit quantity swapped.
 */
static bool zynq_fpga_has_sync(const u8 *buf, size_t count)
{
	for (; count >= 4; buf += 4, count -= 4)
		if (buf[0] == 0x66 && buf[1] == 0x55 && buf[2] == 0x99 &&
		    buf[3] == 0xaa)
			return true;
	return false;
}

static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
				    struct fpga_image_info *info,
				    const char *buf, size_t count)
{
	struct zynq_fpga_priv *priv;
	u32 ctrl, status;
	int err;

	priv = mgr->priv;

	err = clk_enable(priv->clk);
	if (err)
		return err;

	/* don't globally reset PL if we're doing partial reconfig */
	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
		if (!zynq_fpga_has_sync(buf, count)) {
			dev_err(&mgr->dev,
				"Invalid bitstream, could not find a sync word. Bitstream must be a byte swapped .bin file\n");
			err = -EINVAL;
			goto out_err;
		}

		/* assert AXI interface resets */
		regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
			     FPGA_RST_ALL_MASK);

		/* disable all level shifters */
		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
			     LVL_SHFTR_DISABLE_ALL_MASK);
		/* enable level shifters from PS to PL */
		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
			     LVL_SHFTR_ENABLE_PS_TO_PL);

		/* create a rising edge on PCFG_INIT. PCFG_INIT follows
		 * PCFG_PROG_B, so we need to poll it after setting PCFG_PROG_B
		 * to make sure the rising edge actually happens.
		 * Note: PCFG_PROG_B is low active, sequence as described in
		 * UG585 v1.10 page 211
		 */
		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
		ctrl |= CTRL_PCFG_PROG_B_MASK;

		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);

		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
					     status & STATUS_PCFG_INIT_MASK,
					     INIT_POLL_DELAY,
					     INIT_POLL_TIMEOUT);
		if (err) {
			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
			goto out_err;
		}

		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
		ctrl &= ~CTRL_PCFG_PROG_B_MASK;

		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);

		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
					     !(status & STATUS_PCFG_INIT_MASK),
					     INIT_POLL_DELAY,
					     INIT_POLL_TIMEOUT);
		if (err) {
			dev_err(&mgr->dev, "Timeout waiting for !PCFG_INIT\n");
			goto out_err;
		}

		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
		ctrl |= CTRL_PCFG_PROG_B_MASK;

		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);

		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
					     status & STATUS_PCFG_INIT_MASK,
					     INIT_POLL_DELAY,
					     INIT_POLL_TIMEOUT);
		if (err) {
			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
			goto out_err;
		}
	}

	/* set configuration register with following options:
	 * - enable PCAP interface
	 * - set throughput for maximum speed
	 * - set CPU in user mode
	 */
	ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
	zynq_fpga_write(priv, CTRL_OFFSET,
			(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl));

	/* We expect that the command queue is empty right now. */
	status = zynq_fpga_read(priv, STATUS_OFFSET);
	if ((status & STATUS_DMA_Q_F) ||
	    (status & STATUS_DMA_Q_E) != STATUS_DMA_Q_E) {
		dev_err(&mgr->dev, "DMA command queue not right\n");
		err = -EBUSY;
		goto out_err;
	}

	/* ensure internal PCAP loopback is disabled */
	ctrl = zynq_fpga_read(priv, MCTRL_OFFSET);
	zynq_fpga_write(priv, MCTRL_OFFSET, (~MCTRL_PCAP_LPBK_MASK & ctrl));

	clk_disable(priv->clk);

	return 0;

out_err:
	clk_disable(priv->clk);

	return err;
}

static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
{
	struct zynq_fpga_priv *priv;
	const char *why;
	int err;
	u32 intr_status;
	unsigned long timeout;
	unsigned long flags;
	struct scatterlist *sg;
	int i;

	priv = mgr->priv;

	/* The hardware can only DMA multiples of 4 bytes, and it requires the
	 * starting addresses to be aligned to 64 bits (UG585 pg 212).
	 */
	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
		if ((sg->offset % 8) || (sg->length % 4)) {
			dev_err(&mgr->dev,
			    "Invalid bitstream, chunks must be aligned\n");
			return -EINVAL;
		}
	}

	priv->dma_nelms =
	    dma_map_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
	if (priv->dma_nelms == 0) {
		dev_err(&mgr->dev, "Unable to DMA map (TO_DEVICE)\n");
		return -ENOMEM;
	}

	/* enable clock */
	err = clk_enable(priv->clk);
	if (err)
		goto out_free;

	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
	reinit_completion(&priv->dma_done);

	/* zynq_step_dma will turn on interrupts */
	spin_lock_irqsave(&priv->dma_lock, flags);
	priv->dma_elm = 0;
	priv->cur_sg = sgt->sgl;
	zynq_step_dma(priv);
	spin_unlock_irqrestore(&priv->dma_lock, flags);

	timeout = wait_for_completion_timeout(&priv->dma_done,
					      msecs_to_jiffies(DMA_TIMEOUT_MS));

	spin_lock_irqsave(&priv->dma_lock, flags);
	zynq_fpga_set_irq(priv, 0);
	priv->cur_sg = NULL;
	spin_unlock_irqrestore(&priv->dma_lock, flags);

	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);

	/* There doesn't seem to be a way to force cancel any DMA, so if
	 * something went wrong we are relying on the hardware to have halted
	 * the DMA before we get here, if there was we could use
	 * wait_for_completion_interruptible too.
	 */

	if (intr_status & IXR_ERROR_FLAGS_MASK) {
		why = "DMA reported error";
		err = -EIO;
		goto out_report;
	}

	if (priv->cur_sg ||
	    !((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
		if (timeout == 0)
			why = "DMA timed out";
		else
			why = "DMA did not complete";
		err = -EIO;
		goto out_report;
	}

	err = 0;
	goto out_clk;

out_report:
	dev_err(&mgr->dev,
		"%s: INT_STS:0x%x CTRL:0x%x LOCK:0x%x INT_MASK:0x%x STATUS:0x%x MCTRL:0x%x\n",
		why,
		intr_status,
		zynq_fpga_read(priv, CTRL_OFFSET),
		zynq_fpga_read(priv, LOCK_OFFSET),
		zynq_fpga_read(priv, INT_MASK_OFFSET),
		zynq_fpga_read(priv, STATUS_OFFSET),
		zynq_fpga_read(priv, MCTRL_OFFSET));

out_clk:
	clk_disable(priv->clk);

out_free:
	dma_unmap_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
	return err;
}

static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
					struct fpga_image_info *info)
{
	struct zynq_fpga_priv *priv = mgr->priv;
	int err;
	u32 intr_status;

	err = clk_enable(priv->clk);
	if (err)
		return err;

	err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
				     intr_status & IXR_PCFG_DONE_MASK,
				     INIT_POLL_DELAY,
				     INIT_POLL_TIMEOUT);

	clk_disable(priv->clk);

	if (err)
		return err;

	/* for the partial reconfig case we didn't touch the level shifters */
	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
		/* enable level shifters from PL to PS */
		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
			     LVL_SHFTR_ENABLE_PL_TO_PS);

		/* deassert AXI interface resets */
		regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
			     FPGA_RST_NONE_MASK);
	}

	return 0;
}

static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
{
	int err;
	u32 intr_status;
	struct zynq_fpga_priv *priv;

	priv = mgr->priv;

	err = clk_enable(priv->clk);
	if (err)
		return FPGA_MGR_STATE_UNKNOWN;

	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
	clk_disable(priv->clk);

	if (intr_status & IXR_PCFG_DONE_MASK)
		return FPGA_MGR_STATE_OPERATING;

	return FPGA_MGR_STATE_UNKNOWN;
}

static const struct fpga_manager_ops zynq_fpga_ops = {
	.initial_header_size = 128,
	.state = zynq_fpga_ops_state,
	.write_init = zynq_fpga_ops_write_init,
	.write_sg = zynq_fpga_ops_write,
	.write_complete = zynq_fpga_ops_write_complete,
};

static int zynq_fpga_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct zynq_fpga_priv *priv;
	struct resource *res;
	int err;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;
	spin_lock_init(&priv->dma_lock);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	priv->io_base = devm_ioremap_resource(dev, res);
	if (IS_ERR(priv->io_base))
		return PTR_ERR(priv->io_base);

	priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
		"syscon");
	if (IS_ERR(priv->slcr)) {
		dev_err(dev, "unable to get zynq-slcr regmap\n");
		return PTR_ERR(priv->slcr);
	}

	init_completion(&priv->dma_done);

	priv->irq = platform_get_irq(pdev, 0);
	if (priv->irq < 0) {
		dev_err(dev, "No IRQ available\n");
		return priv->irq;
	}

	priv->clk = devm_clk_get(dev, "ref_clk");
	if (IS_ERR(priv->clk)) {
		dev_err(dev, "input clock not found\n");
		return PTR_ERR(priv->clk);
	}

	err = clk_prepare_enable(priv->clk);
	if (err) {
		dev_err(dev, "unable to enable clock\n");
		return err;
	}

	/* unlock the device */
	zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);

	zynq_fpga_set_irq(priv, 0);
	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
	err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0, dev_name(dev),
			       priv);
	if (err) {
		dev_err(dev, "unable to request IRQ\n");
		clk_disable_unprepare(priv->clk);
		return err;
	}

	clk_disable(priv->clk);

	err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
				&zynq_fpga_ops, priv);
	if (err) {
		dev_err(dev, "unable to register FPGA manager\n");
		clk_unprepare(priv->clk);
		return err;
	}

	return 0;
}

static int zynq_fpga_remove(struct platform_device *pdev)
{
	struct zynq_fpga_priv *priv;
	struct fpga_manager *mgr;

	mgr = platform_get_drvdata(pdev);
	priv = mgr->priv;

	fpga_mgr_unregister(&pdev->dev);

	clk_unprepare(priv->clk);

	return 0;
}

#ifdef CONFIG_OF
static const struct of_device_id zynq_fpga_of_match[] = {
	{ .compatible = "xlnx,zynq-devcfg-1.0", },
	{},
};

MODULE_DEVICE_TABLE(of, zynq_fpga_of_match);
#endif

static struct platform_driver zynq_fpga_driver = {
	.probe = zynq_fpga_probe,
	.remove = zynq_fpga_remove,
	.driver = {
		.name = "zynq_fpga_manager",
		.of_match_table = of_match_ptr(zynq_fpga_of_match),
	},
};

module_platform_driver(zynq_fpga_driver);

MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
MODULE_DESCRIPTION("Xilinx Zynq FPGA Manager");
MODULE_LICENSE("GPL v2");
OpenPOWER on IntegriCloud