summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/p1022ds.dts
blob: ef95717db4bc37d66db1852ea61c4bf648ca430d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
/*
 * P1022 DS 36Bit Physical Address Map Device Tree Source
 *
 * Copyright 2010 Freescale Semiconductor, Inc.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/include/ "fsl/p1022si-pre.dtsi"
/ {
	model = "fsl,P1022DS";
	compatible = "fsl,P1022DS";

	memory {
		device_type = "memory";
	};

	lbc: localbus@fffe05000 {
		reg = <0xf 0xffe05000 0 0x1000>;
		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
			  0x1 0x0 0xf 0xe0000000 0x08000000
			  0x2 0x0 0xf 0xff800000 0x00040000
			  0x3 0x0 0xf 0xffdf0000 0x00008000>;

		/*
		 * This node is used to access the pixis via "indirect" mode,
		 * which is done by writing the pixis register index to chip
		 * select 0 and the value to/from chip select 1.  Indirect
		 * mode is the only way to access the pixis when DIU video
		 * is enabled.  Note that this assumes that the first column
		 * of the 'ranges' property above is the chip select number.
		 */
		board-control@0,0 {
			compatible = "fsl,p1022ds-indirect-pixis";
			reg = <0x0 0x0 1	/* CS0 */
			       0x1 0x0 1>;	/* CS1 */
		};

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;
			bank-width = <2>;
			device-width = <1>;

			partition@0 {
				reg = <0x0 0x03000000>;
				label = "ramdisk-nor";
				read-only;
			};

			partition@3000000 {
				reg = <0x03000000 0x00e00000>;
				label = "diagnostic-nor";
				read-only;
			};

			partition@3e00000 {
				reg = <0x03e00000 0x00200000>;
				label = "dink-nor";
				read-only;
			};

			partition@4000000 {
				reg = <0x04000000 0x00400000>;
				label = "kernel-nor";
				read-only;
			};

			partition@4400000 {
				reg = <0x04400000 0x03b00000>;
				label = "jffs2-nor";
			};

			partition@7f00000 {
				reg = <0x07f00000 0x00080000>;
				label = "dtb-nor";
				read-only;
			};

			partition@7f80000 {
				reg = <0x07f80000 0x00080000>;
				label = "u-boot-nor";
				read-only;
			};
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,elbc-fcm-nand";
			reg = <0x2 0x0 0x40000>;

			partition@0 {
				reg = <0x0 0x02000000>;
				label = "u-boot-nand";
				read-only;
			};

			partition@2000000 {
				reg = <0x02000000 0x10000000>;
				label = "jffs2-nand";
			};

			partition@12000000 {
				reg = <0x12000000 0x10000000>;
				label = "ramdisk-nand";
				read-only;
			};

			partition@22000000 {
				reg = <0x22000000 0x04000000>;
				label = "kernel-nand";
			};

			partition@26000000 {
				reg = <0x26000000 0x01000000>;
				label = "dtb-nand";
				read-only;
			};

			partition@27000000 {
				reg = <0x27000000 0x19000000>;
				label = "reserved-nand";
			};
		};

		board-control@3,0 {
			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
			reg = <3 0 0x30>;
			interrupt-parent = <&mpic>;
			/*
			 * IRQ8 is generated if the "EVENT" switch is pressed
			 * and PX_CTL[EVESEL] is set to 00.
			 */
			interrupts = <8 8 0 0>;
		};
	};

	soc: soc@fffe00000 {
		ranges = <0x0 0xf 0xffe00000 0x100000>;

		i2c@3100 {
			wm8776:codec@1a {
				compatible = "wlf,wm8776";
				reg = <0x1a>;
				/*
				 * clock-frequency will be set by U-Boot if
				 * the clock is enabled.
				 */
			};
		};

		spi@7000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "spansion,s25sl12801";
				reg = <0>;
				spi-max-frequency = <40000000>; /* input clock */

				partition@0 {
					label = "u-boot-spi";
					reg = <0x00000000 0x00100000>;
					read-only;
				};
				partition@100000 {
					label = "kernel-spi";
					reg = <0x00100000 0x00500000>;
					read-only;
				};
				partition@600000 {
					label = "dtb-spi";
					reg = <0x00600000 0x00100000>;
					read-only;
				};
				partition@700000 {
					label = "file system-spi";
					reg = <0x00700000 0x00900000>;
				};
			};
		};

		ssi@15000 {
			fsl,mode = "i2s-slave";
			codec-handle = <&wm8776>;
			fsl,ssi-asynchronous;
		};

		usb@22000 {
			phy_type = "ulpi";
		};

		usb@23000 {
			status = "disabled";
		};

		mdio@24000 {
			phy0: ethernet-phy@0 {
				interrupts = <3 1 0 0>;
				reg = <0x1>;
			};
			phy1: ethernet-phy@1 {
				interrupts = <9 1 0 0>;
				reg = <0x2>;
			};
			tbi-phy@2 {
				device_type = "tbi-phy";
				reg = <0x2>;
			};
		};

		ethernet@b0000 {
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";
		};

		ethernet@b1000 {
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};
	};

	pci0: pcie@fffe09000 {
		reg = <0xf 0xffe09000 0 0x1000>;
		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xe0000000
				  0x2000000 0x0 0xe0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};

	pci1: pcie@fffe0a000 {
		reg = <0xf 0xffe0a000 0 0x1000>;
		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			ranges = <0x2000000 0x0 0xe0000000
				  0x2000000 0x0 0xe0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};

	pci2: pcie@fffe0b000 {
		reg = <0xf 0xffe0b000 0 0x1000>;
		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xe0000000
				  0x2000000 0x0 0xe0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};
};

/include/ "fsl/p1022si-post.dtsi"
OpenPOWER on IntegriCloud