summaryrefslogtreecommitdiffstats
path: root/arch/m68k/platform/520x/config.c
blob: 09df4b89e8be1ee04711df00fb715037edc473d7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
/***************************************************************************/

/*
 *  linux/arch/m68knommu/platform/520x/config.c
 *
 *  Copyright (C) 2005,      Freescale (www.freescale.com)
 *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
 *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
 *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
 */

/***************************************************************************/

#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>

/***************************************************************************/

#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)

static void __init m520x_qspi_init(void)
{
	u16 par;
	/* setup Port QS for QSPI with gpio CS control */
	writeb(0x3f, MCF_GPIO_PAR_QSPI);
	/* make U1CTS and U2RTS gpio for cs_control */
	par = readw(MCF_GPIO_PAR_UART);
	par &= 0x00ff;
	writew(par, MCF_GPIO_PAR_UART);
}

#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */

/***************************************************************************/

static void __init m520x_uarts_init(void)
{
	u16 par;
	u8 par2;

	/* UART0 and UART1 GPIO pin setup */
	par = readw(MCF_GPIO_PAR_UART);
	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
	writew(par, MCF_GPIO_PAR_UART);

	/* UART1 GPIO pin setup */
	par2 = readb(MCF_GPIO_PAR_FECI2C);
	par2 &= ~0x0F;
	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
	writeb(par2, MCF_GPIO_PAR_FECI2C);
}

/***************************************************************************/

static void __init m520x_fec_init(void)
{
	u8 v;

	/* Set multi-function pins to ethernet mode */
	v = readb(MCF_GPIO_PAR_FEC);
	writeb(v | 0xf0, MCF_GPIO_PAR_FEC);

	v = readb(MCF_GPIO_PAR_FECI2C);
	writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
}

/***************************************************************************/

void __init config_BSP(char *commandp, int size)
{
	mach_sched_init = hw_timer_init;
	m520x_uarts_init();
	m520x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
	m520x_qspi_init();
#endif
}

/***************************************************************************/
OpenPOWER on IntegriCloud