blob: b6390beff3234fa12215e78734e7472b5fbc25f4 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
#ifndef __PLAT_PXA_GPIO_H
#define __PLAT_PXA_GPIO_H
struct irq_data;
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
*
* GPLR GPDR GPSR GPCR GRER GFER GEDR
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
*
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
* BANK 4 and 5 are only available on PXA935
*/
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space, the
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
extern int pxa_last_gpio;
typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_PXA_GPIO_H */
|
