summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-vexpress/include/mach/entry-macro.S
blob: 20e9fb514f0ac6aa94d4185ae75b6401e7459f96 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
#include <asm/hardware/gic.h>

	.macro	disable_fiq
	.endm

	.macro	get_irqnr_preamble, base, tmp
	ldr	\base, =gic_cpu_base_addr
	ldr	\base, [\base]
	.endm

	.macro	arch_ret_to_user, tmp1, tmp2
	.endm

	/*
	 * The interrupt numbering scheme is defined in the
	 * interrupt controller spec.  To wit:
	 *
	 * Interrupts 0-15 are IPI
	 * 16-28 are reserved
	 * 29-31 are local.  We allow 30 to be used for the watchdog.
	 * 32-1020 are global
	 * 1021-1022 are reserved
	 * 1023 is "spurious" (no interrupt)
	 *
	 * For now, we ignore all local interrupts so only return an interrupt if it's
	 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
	 *
	 * A simple read from the controller will tell us the number of the highest
	 * priority enabled interrupt.  We then just need to check whether it is in the
	 * valid range for an IRQ (30-1020 inclusive).
	 */

	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
	ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
	ldr	\tmp, =1021
	bic     \irqnr, \irqstat, #0x1c00
	cmp     \irqnr, #29
	cmpcc	\irqnr, \irqnr
	cmpne	\irqnr, \tmp
	cmpcs	\irqnr, \irqnr
	.endm

	/* We assume that irqstat (the raw value of the IRQ acknowledge
	 * register) is preserved from the macro above.
	 * If there is an IPI, we immediately signal end of interrupt on the
	 * controller, since this requires the original irqstat value which
	 * we won't easily be able to recreate later.
	 */

	.macro test_for_ipi, irqnr, irqstat, base, tmp
	bic	\irqnr, \irqstat, #0x1c00
	cmp	\irqnr, #16
	strcc	\irqstat, [\base, #GIC_CPU_EOI]
	cmpcs	\irqnr, \irqnr
	.endm

	/* As above, this assumes that irqstat and base are preserved.. */

	.macro test_for_ltirq, irqnr, irqstat, base, tmp
	bic	\irqnr, \irqstat, #0x1c00
	mov 	\tmp, #0
	cmp	\irqnr, #29
	moveq	\tmp, #1
	streq	\irqstat, [\base, #GIC_CPU_EOI]
	cmp	\tmp, #0
	.endm

OpenPOWER on IntegriCloud