summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500-pins.c
blob: 32fd99204464a25da4dba6012b575ea844521aaf (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License terms: GNU General Public License (GPL) version 2
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>

#include <asm/mach-types.h>
#include <plat/pincfg.h>
#include <plat/gpio-nomadik.h>

#include <mach/hardware.h>

#include "pins-db8500.h"
#include "board-mop500.h"

enum custom_pin_cfg_t {
	PINS_FOR_DEFAULT,
	PINS_FOR_U9500,
};

static enum custom_pin_cfg_t pinsfor;

/* These simply sets bias for pins */
#define BIAS(a,b) static unsigned long a[] = { b }

BIAS(pd, PIN_PULL_DOWN);
BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
BIAS(in_nopull, PIN_INPUT_NOPULL);
BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
BIAS(in_pu, PIN_INPUT_PULLUP);
BIAS(in_pd, PIN_INPUT_PULLDOWN);
BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
BIAS(out_hi, PIN_OUTPUT_HIGH);
BIAS(out_lo, PIN_OUTPUT_LOW);
BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
/* These also force them into GPIO mode */
BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE);
BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);

/* We use these to define hog settings that are always done on boot */
#define DB8500_MUX_HOG(group,func) \
	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
#define DB8500_PIN_HOG(pin,conf) \
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)

/* These are default states associated with device and changed runtime */
#define DB8500_MUX(group,func,dev) \
	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
#define DB8500_PIN(pin,conf,dev) \
	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)

#define DB8500_PIN_SLEEP(pin,conf,dev) \
	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
			    pin, conf)

/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
	/*
	 * uMSP0, mux in 4 pins, regular placement of RX/TX
	 * explicitly set the pins to no pull
	 */
	DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
	DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
	DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
	DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
	DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
	DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
	/* MSP2 for HDMI, pull down TXD, TCK, TFS  */
	DB8500_MUX_HOG("msp2_a_1", "msp2"),
	DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
	DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
	DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
	DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
	/*
	 * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
	 * pull-up
	 * TODO: is this really correct? Snowball doesn't have a LCD.
	 */
	DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
	DB8500_PIN_HOG("GPIO68_E1", in_pu),
	DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
	/*
	 * STMPE1601/tc35893 keypad IRQ GPIO 218
	 * TODO: set for snowball and HREF really??
	 */
	DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
	/*
	 * UART0, we do not mux in u0 here.
	 * uart-0 pins gpio configuration should be kept intact to prevent
	 * a glitch in tx line when the tty dev is opened. Later these pins
	 * are configured to uart mop500_pins_uart0
	 */
	DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
	DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
	DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
	DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
	/*
	 * Mux in UART2 on altfunction C and set pull-ups.
	 * TODO: is this used on U8500 variants and Snowball really?
	 * The setting on GPIO31 conflicts with magnetometer use on hrefv60
	 */
	DB8500_MUX_HOG("u2rxtx_c_1", "u2"),
	DB8500_MUX_HOG("u2ctsrts_c_1", "u2"),
	DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */
	DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */
	DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */
	DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */
	/*
	 * The following pin sets were known as "runtime pins" before being
	 * converted to the pinctrl model. Here we model them as "default"
	 * states.
	 */
	/* Mux in UART0 after initialization */
	DB8500_MUX("u0_a_1", "u0", "uart0"),
	DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
	DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
	/* UART0 sleep state */
	DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"),
	DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"),
	DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"),
	DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"),
	/* MSP1 for ALSA codec */
	DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
	DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
	DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"),
	DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
	DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
	DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
	/* MSP1 sleep state */
	DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"),
	DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
	DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
	DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
	DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"),
	/* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */
	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
	DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"),
	DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"),
	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
	DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"),
	DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"),
	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
	DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"),
	DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"),
	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
	DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"),
	DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"),
	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
	DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
	DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
	DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
	DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
	DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
	DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
	DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
	DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
	DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
	/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
	DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
	DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
	DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
	DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
	DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
	DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
	DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
	DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
	/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
	DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
	DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
	DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
	DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
	DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
	DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
	DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
	DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
	DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
	DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
	DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
	DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
	/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
	DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
	DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
	DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
	DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
	DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
	DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
	DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
	DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
	DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
	DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
	DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
	DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
	/* Mux in USB pins, drive STP high */
	DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
	DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
	/* Mux in SPI2 pins on the "other C1" altfunction */
	DB8500_MUX("spi2_oc1_1", "spi2", "spi2"),
	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
};

/*
 * These are specifically for the MOP500 and HREFP (pre-v60) version of the
 * board, which utilized a TC35892 GPIO expander instead of using a lot of
 * on-chip pins as the HREFv60 and later does.
 */
static struct pinctrl_map __initdata mop500_pinmap[] = {
	/* Mux in SSP0, pull down RXD pin */
	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
	DB8500_PIN_HOG("GPIO145_C13", pd),
	/*
	 * XENON Flashgun on image processor GPIO (controlled from image
	 * processor firmware), mux in these image processor GPIO lines 0
	 * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
	 * the pins.
	 */
	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
	DB8500_PIN_HOG("GPIO6_AF6", in_pu),
	DB8500_PIN_HOG("GPIO7_AG5", in_pu),
	/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
	DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
	/* Mux in UART1 and set the pull-ups */
	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
	DB8500_MUX_HOG("u1ctsrts_a_1", "u1"),
	DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
	DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */
	DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */
	/*
	 * Runtime stuff: make it possible to mux in the SKE keypad
	 * and bias the pins
	 */
	DB8500_MUX("kp_a_2", "kp", "ske"),
	DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
	DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
	DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
	DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
	DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
	DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
	DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
	DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
	DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
	DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
	DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
	DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
	DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
	DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
	DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
	DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
	/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
	DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
	DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
};

/*
 * The HREFv60 series of platforms is using available pins on the DB8500
 * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
 * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
 */
static struct pinctrl_map __initdata hrefv60_pinmap[] = {
	/* Drive WLAN_ENA low */
	DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
	/*
	 * XENON Flashgun on image processor GPIO (controlled from image
	 * processor firmware), mux in these image processor GPIO lines 0
	 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
	 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
	 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
	 */
	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
	DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
	DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
	DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
	DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
	/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
	DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
	DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
	/*
	 * Display Interface 1 uses GPIO 65 for RST (reset).
	 * Display Interface 2 uses GPIO 66 for RST (reset).
	 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
	 */
	DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
	DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
	/*
	 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
	 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
	 * reset signals low.
	 */
	DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
	DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
	DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
	/*
	 * Drive D19-D23 for the ETM PTM trace interface low,
	 * (presumably pins are unconnected therefore grounded here,
	 * the "other alt C1" setting enables these pins)
	 */
	DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
	DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
	DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
	DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
	DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
	/* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
	DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
	DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
	/* NFC ENA and RESET to low, pulldown IRQ line */
	DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
	DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
	/*
	 * SKE keyboard partly on alt A and partly on "Other alt C1"
	 * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
	 * rows of 6 keys, then pull up force sensing interrup and
	 * drive reset and force sensing WU low.
	 */
	DB8500_MUX_HOG("kp_a_1", "kp"),
	DB8500_MUX_HOG("kp_oc1_1", "kp"),
	DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
	DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
	DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
	DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
	DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
	DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
	DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
	DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
	DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
	DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
	DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
	/* DiPro Sensor interrupt */
	DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
	/* Audio Amplifier HF enable */
	DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
	/* GBF interface, pull low to reset state */
	DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
	/* MSP : HDTV INTERFACE GPIO line */
	DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
	/* Accelerometer interrupt lines */
	DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
	DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
	/* SD card detect GPIO pin */
	DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
	/*
	 * Runtime stuff
	 * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
	 * etc.
	 */
	DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
	DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
	DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
	/*
	 * Make it possible to mux in the SKE keypad and bias the pins
	 * FIXME: what's the point with this on HREFv60? KP/SKE is already
	 * muxed in at another place! Enabling this will bork.
	 */
	DB8500_MUX("kp_a_2", "kp", "ske"),
	DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
	DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
	DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
	DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
	DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
	DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
	DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
	DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
	DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
	DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
	DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
	DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
	DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
	DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
	DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
	DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
};

static struct pinctrl_map __initdata u9500_pinmap[] = {
	/* Mux in UART1 (just RX/TX) and set the pull-ups */
	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
	DB8500_PIN_HOG("GPIO4_AH6", in_pu),
	DB8500_PIN_HOG("GPIO5_AG6", out_hi),
	/* WLAN_IRQ line */
	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
	/* HSI */
	DB8500_MUX_HOG("hsir_a_1", "hsi"),
	DB8500_MUX_HOG("hsit_a_1", "hsi"),
	DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
	DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
	DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
	DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
	DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
	DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
	DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
	DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */
};

static struct pinctrl_map __initdata u8500_pinmap[] = {
	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
	DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
};

static struct pinctrl_map __initdata snowball_pinmap[] = {
	/* Mux in SSP0 connected to AB8500, pull down RXD pin */
	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
	DB8500_PIN_HOG("GPIO145_C13", pd),
	/* Always drive the MC0 DAT31DIR line high on these boards */
	DB8500_PIN_HOG("GPIO21_AB3", out_hi),
	/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
	DB8500_MUX_HOG("sm_b_1", "sm"),
	/* Drive RSTn_LAN high */
	DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
	/*  Accelerometer/Magnetometer */
	DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
	DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
	DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
	/* WLAN/GBF */
	DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
	DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
	DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
	DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
};

/*
 * passing "pinsfor=" in kernel cmdline allows for custom
 * configuration of GPIOs on u8500 derived boards.
 */
static int __init early_pinsfor(char *p)
{
	pinsfor = PINS_FOR_DEFAULT;

	if (strcmp(p, "u9500-21") == 0)
		pinsfor = PINS_FOR_U9500;

	return 0;
}
early_param("pinsfor", early_pinsfor);

int pins_for_u9500(void)
{
	if (pinsfor == PINS_FOR_U9500)
		return 1;

	return 0;
}

static void __init mop500_href_family_pinmaps_init(void)
{
	switch (pinsfor) {
	case PINS_FOR_U9500:
		pinctrl_register_mappings(u9500_pinmap,
					  ARRAY_SIZE(u9500_pinmap));
		break;
	case PINS_FOR_DEFAULT:
		pinctrl_register_mappings(u8500_pinmap,
					  ARRAY_SIZE(u8500_pinmap));
	default:
		break;
	}
}

void __init mop500_pinmaps_init(void)
{
	pinctrl_register_mappings(mop500_family_pinmap,
				  ARRAY_SIZE(mop500_family_pinmap));
	pinctrl_register_mappings(mop500_pinmap,
				  ARRAY_SIZE(mop500_pinmap));
	mop500_href_family_pinmaps_init();
}

void __init snowball_pinmaps_init(void)
{
	pinctrl_register_mappings(mop500_family_pinmap,
				  ARRAY_SIZE(mop500_family_pinmap));
	pinctrl_register_mappings(snowball_pinmap,
				  ARRAY_SIZE(snowball_pinmap));
	pinctrl_register_mappings(u8500_pinmap,
				  ARRAY_SIZE(u8500_pinmap));
}

void __init hrefv60_pinmaps_init(void)
{
	pinctrl_register_mappings(mop500_family_pinmap,
				  ARRAY_SIZE(mop500_family_pinmap));
	pinctrl_register_mappings(hrefv60_pinmap,
				  ARRAY_SIZE(hrefv60_pinmap));
	mop500_href_family_pinmaps_init();
}
OpenPOWER on IntegriCloud