summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/sram242x.S
blob: 680a7c56cc3ec2dc454ad73e0c93ebadf360d58a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
/*
 * linux/arch/arm/mach-omap2/sram242x.S
 *
 * Omap2 specific functions that need to be run in internal SRAM
 *
 * (C) Copyright 2004
 * Texas Instruments, <www.ti.com>
 * Richard Woodruff <r-woodruff2@ti.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 * Richard Woodruff notes that any changes to this code must be carefully
 * audited and tested to ensure that they don't cause a TLB miss while
 * the SDRAM is inaccessible.  Such a situation will crash the system
 * since it will cause the ARM MMU to attempt to walk the page tables.
 * These crashes may be intermittent.
 */
#include <linux/linkage.h>

#include <asm/assembler.h>

#include "soc.h"
#include "iomap.h"
#include "prm2xxx.h"
#include "cm2xxx.h"
#include "sdrc.h"

	.text

	.align	3
ENTRY(omap242x_sram_ddr_init)
	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack

	mov	r12, r2			@ capture CS1 vs CS0
	mov	r8, r3			@ capture force parameter

	/* frequency shift down */
	ldr	r2, omap242x_sdi_cm_clksel2_pll	@ get address of dpllout reg
	mov	r3, #0x1		@ value for 1x operation
	str	r3, [r2]		@ go to L1-freq operation

	/* voltage shift down */
	mov r9, #0x1			@ set up for L1 voltage call
	bl voltage_shift		@ go drop voltage

	/* dll lock mode */
	ldr	r11, omap242x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
	ldr	r10, [r11]		@ get current val
	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
	mvn	r9, #0x4		@ mask to get clear bit2
	and	r10, r10, r9		@ clear bit2 for lock mode.
	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
	str	r10, [r11]		@ commit to DLLA_CTRL
	bl	i_dll_wait		@ wait for dll to lock

	/* get dll value */
	add	r11, r11, #0x4		@ get addr of status reg
	ldr	r10, [r11]		@ get locked value

	/* voltage shift up */
	mov r9, #0x0			@ shift back to L0-voltage
	bl voltage_shift		@ go raise voltage

	/* frequency shift up */
	mov	r3, #0x2		@ value for 2x operation
	str	r3, [r2]		@ go to L0-freq operation

	/* reset entry mode for dllctrl */
	sub	r11, r11, #0x4		@ move from status to ctrl
	cmp	r12, #0x1		@ normalize if cs1 based
	subeq	r11, r11, #0x8		@ possibly back to DLLA
	cmp	r8, #0x1		@ if forced unlock exit
	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
	str	r1, [r11]		@ restore DLLA_CTRL high value
	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
	str	r1, [r11]		@ set value DLLB_CTRL
	bl	i_dll_wait		@ wait for possible lock

	/* set up for return, DDR should be good */
	str r10, [r0]			@ write dll_status and return counter
	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return

	/* ensure the DLL has relocked */
i_dll_wait:
	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
i_dll_delay:
	subs	r4, r4, #0x1
	bne	i_dll_delay
	mov	pc, lr

	/*
	 * shift up or down voltage, use R9 as input to tell level.
	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
	 */
voltage_shift:
	ldr	r4, omap242x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
	ldr	r5, [r4]		@ get value.
	ldr	r6, prcm_mask_val	@ get value of mask
	and	r5, r5, r6		@ apply mask to clear bits
	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
	str	r5, [r4]		@ set up for change.
	mov	r3, #0x4000		@ get val for force
	orr	r5, r5, r3		@ build value for force
	str	r5, [r4]		@ Force transition to L1

	ldr	r3, omap242x_sdi_timer_32ksynct_cr	@ get addr of counter
	ldr	r5, [r3]		@ get value
	add	r5, r5, #0x3		@ give it at most 93uS
volt_delay:
	ldr	r7, [r3]		@ get timer value
	cmp	r5, r7			@ time up?
	bhi	volt_delay		@ not yet->branch
	mov	pc, lr			@ back to caller.

omap242x_sdi_cm_clksel2_pll:
	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
omap242x_sdi_sdrc_dlla_ctrl:
	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_sdi_prcm_voltctrl:
	.word OMAP2420_PRCM_VOLTCTRL
prcm_mask_val:
	.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
	.word	. - omap242x_sram_ddr_init

/*
 * Reprograms memory timings.
 * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
 * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
 */
	.align	3
ENTRY(omap242x_sram_reprogram_sdrc)
	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
	mov	r3, #0x0		@ clear for mrc call
	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
	nop
	nop
	ldr	r6, omap242x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
	ldr	r5, [r6]		@ get value
	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst

	cmp	r0, #0x1		@ going to half speed?
	movne	r9, #0x0		@ if up set flag up for pre up, hi volt

	blne	voltage_shift_c		@ adjust voltage

	cmp	r0, #0x1		@ going to half speed (post branch link)
	moveq	r5, r5, lsr #1		@ divide by 2 if to half
	movne	r5, r5, lsl #1		@ mult by 2 if to full
	mov	r5, r5, lsl #8		@ put rfr field back into place
	add	r5, r5, #0x1		@ turn on burst of 1
	ldr	r4, omap242x_srs_cm_clksel2_pll	@ get address of out reg
	ldr	r3, [r4]		@ get curr value
	orr	r3, r3, #0x3
	bic	r3, r3, #0x3		@ clear lower bits
	orr	r3, r3, r0		@ new state value
	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
	nop
	nop

	moveq	r9, #0x1		@ if speed down, post down, drop volt
	bleq	voltage_shift_c

	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
	str	r5, [r6]		@ set new RFR_1 value
	add	r6, r6, #0x30		@ get RFR_2 addr
	str	r5, [r6]		@ set RFR_2
	nop
	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
	bne	freq_out		@ leave if SDR, no DLL function

	/* With DDR, we need to take care of the DLL for the frequency change */
	ldr	r2, omap242x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
dll_wait:
	subs	r1, r1, #0x1
	bne	dll_wait
freq_out:
	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return

    /*
     * shift up or down voltage, use R9 as input to tell level.
     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
     */
voltage_shift_c:
	ldr	r10, omap242x_srs_prcm_voltctrl	@ get addr of volt ctrl
	ldr	r8, [r10]		@ get value
	ldr	r7, ddr_prcm_mask_val	@ get value of mask
	and	r8, r8, r7		@ apply mask to clear bits
	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
	str	r8, [r10]		@ set up for change.
	mov	r7, #0x4000		@ get val for force
	orr	r8, r8, r7		@ build value for force
	str	r8, [r10]		@ Force transition to L1

	ldr	r10, omap242x_srs_timer_32ksynct	@ get addr of counter
	ldr	r8, [r10]		@ get value
	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
volt_delay_c:
	ldr	r7, [r10]		@ get timer value
	cmp	r8, r7			@ time up?
	bhi	volt_delay_c		@ not yet->branch
	mov	pc, lr			@ back to caller

omap242x_srs_cm_clksel2_pll:
	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
omap242x_srs_sdrc_dlla_ctrl:
	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_srs_sdrc_rfr_ctrl:
	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_srs_prcm_voltctrl:
	.word OMAP2420_PRCM_VOLTCTRL
ddr_prcm_mask_val:
	.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)

ENTRY(omap242x_sram_reprogram_sdrc_sz)
	.word	. - omap242x_sram_reprogram_sdrc

/*
 * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
 */
	.align	3
ENTRY(omap242x_sram_set_prcm)
	stmfd	sp!, {r0-r12, lr}	@ regs to stack
	adr	r4, pbegin		@ addr of preload start
	adr	r8, pend		@ addr of preload end
	mcrr	p15, 1, r8, r4, c12	@ preload into icache
pbegin:
	/* move into fast relock bypass */
	ldr	r8, omap242x_ssp_pll_ctl	@ get addr
	ldr	r5, [r8]		@ get val
	mvn	r6, #0x3		@ clear mask
	and	r5, r5, r6		@ clear field
	orr	r7, r5, #0x2		@ fast relock val
	str	r7, [r8]		@ go to fast relock
	ldr	r4, omap242x_ssp_pll_stat	@ addr of stat
block:
	/* wait for bypass */
	ldr	r8, [r4]		@ stat value
	and	r8, r8, #0x3		@ mask for stat
	cmp	r8, #0x1		@ there yet
	bne	block			@ loop if not

	/* set new dpll dividers _after_ in bypass */
	ldr	r4, omap242x_ssp_pll_div	@ get addr
	str	r0, [r4]		@ set dpll ctrl val

	ldr	r4, omap242x_ssp_set_config	@ get addr
	mov	r8, #1			@ valid cfg msk
	str	r8, [r4]		@ make dividers take

	mov	r4, #100		@ dead spin a bit
wait_a_bit:
	subs	r4, r4, #1		@ dec loop
	bne	wait_a_bit		@ delay done?

	/* check if staying in bypass */
	cmp	r2, #0x1		@ stay in bypass?
	beq	pend			@ jump over dpll relock

	/* relock DPLL with new vals */
	ldr	r5, omap242x_ssp_pll_stat	@ get addr
	ldr	r4, omap242x_ssp_pll_ctl	@ get addr
	orr	r8, r7, #0x3		@ val for lock dpll
	str	r8, [r4]		@ set val
	mov	r0, #1000		@ dead spin a bit
wait_more:
	subs	r0, r0, #1		@ dec loop
	bne	wait_more		@ delay done?
wait_lock:
	ldr	r8, [r5]		@ get lock val
	and	r8, r8, #3		@ isolate field
	cmp	r8, #2			@ locked?
	bne	wait_lock		@ wait if not
pend:
	/* update memory timings & briefly lock dll */
	ldr	r4, omap242x_ssp_sdrc_rfr	@ get addr
	str	r1, [r4]		@ update refresh timing
	ldr	r11, omap242x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
	ldr	r10, [r11]		@ get current val
	mvn	r9, #0x4		@ mask to get clear bit2
	and	r10, r10, r9		@ clear bit2 for lock mode
	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
	str	r10, [r11]		@ commit to DLLA_CTRL
	add	r11, r11, #0x8		@ move to dllb
	str	r10, [r11]		@ hit DLLB also

	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
wait_dll_lock:
	subs	r4, r4, #0x1
	bne	wait_dll_lock
	nop
	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return

omap242x_ssp_set_config:
	.word OMAP2420_PRCM_CLKCFG_CTRL
omap242x_ssp_pll_ctl:
	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap242x_ssp_pll_stat:
	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
omap242x_ssp_pll_div:
	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
omap242x_ssp_sdrc_rfr:
	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_ssp_dlla_ctrl:
	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)

ENTRY(omap242x_sram_set_prcm_sz)
	.word	. - omap242x_sram_set_prcm
OpenPOWER on IntegriCloud