1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
/*
* opp2420_data.c - old-style "OPP" table for OMAP2420
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - FAST */
{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - FAST */
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - FAST */
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM #4 - ratio1 (ES2.1) - SLOW */
{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - SLOW */
{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - SLOW */
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - SLOW*/
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
|