path: root/arch/arm/mach-omap2/cpuidle34xx.c

/*
 * linux/arch/arm/mach-omap2/cpuidle34xx.c
 *
 * OMAP3 CPU IDLE Routines
 *
 * Copyright (C) 2008 Texas Instruments, Inc.
 * Rajendra Nayak <rnayak@ti.com>
 *
 * Copyright (C) 2007 Texas Instruments, Inc.
 * Karthik Dasu <karthik-dp@ti.com>
 *
 * Copyright (C) 2006 Nokia Corporation
 * Tony Lindgren <tony@atomide.com>
 *
 * Copyright (C) 2005 Texas Instruments, Inc.
 * Richard Woodruff <r-woodruff2@ti.com>
 *
 * Based on pm.c for omap2
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/sched.h>
#include <linux/cpuidle.h>

#include <plat/prcm.h>
#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/serial.h>

#include "pm.h"
#include "control.h"

#ifdef CONFIG_CPU_IDLE

/*
 * The latencies/thresholds for various C states have
 * to be configured from the respective board files.
 * These are some default values (which might not provide
 * the best power savings) used on boards which do not
 * pass these details from the board file.
 */
static struct cpuidle_params cpuidle_params_table[] = {
	/* C1 */
	{2 + 2, 5, 1},
	/* C2 */
	{10 + 10, 30, 1},
	/* C3 */
	{50 + 50, 300, 1},
	/* C4 */
	{1500 + 1800, 4000, 1},
	/* C5 */
	{2500 + 7500, 12000, 1},
	/* C6 */
	{3000 + 8500, 15000, 1},
	/* C7 */
	{10000 + 30000, 300000, 1},
};
#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table)

/* Mach specific information to be recorded in the C-state driver_data */
struct omap3_idle_statedata {
	u32 mpu_state;
	u32 core_state;
	u8 valid;
};
struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES];

struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;

static int omap3_idle_bm_check(void)
{
	if (!omap3_can_sleep())
		return 1;
	return 0;
}

static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
				struct clockdomain *clkdm)
{
	clkdm_allow_idle(clkdm);
	return 0;
}

static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
				struct clockdomain *clkdm)
{
	clkdm_deny_idle(clkdm);
	return 0;
}

/**
 * omap3_enter_idle - Programs OMAP3 to enter the specified state
 * @dev: cpuidle device
 * @state: The target state to be programmed
 *
 * Called from the CPUidle framework to program the device to the
 * specified target state selected by the governor.
 */
static int omap3_enter_idle(struct cpuidle_device *dev,
			struct cpuidle_state *state)
{
	struct omap3_idle_statedata *cx = cpuidle_get_statedata(state);
	struct timespec ts_preidle, ts_postidle, ts_idle;
	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;

	/* Used to keep track of the total time in idle */
	getnstimeofday(&ts_preidle);

	local_irq_disable();
	local_fiq_disable();

	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
	pwrdm_set_next_pwrst(core_pd, core_state);

	if (omap_irq_pending() || need_resched())
		goto return_sleep_time;

	/* Deny idle for C1 */
	if (state == &dev->states[0]) {
		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
	}

	/* Execute ARM wfi */
	omap_sram_idle();

	/* Re-allow idle for C1 */
	if (state == &dev->states[0]) {
		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
	}

return_sleep_time:
	getnstimeofday(&ts_postidle);
	ts_idle = timespec_sub(ts_postidle, ts_preidle);

	local_irq_enable();
	local_fiq_enable();

	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}

/**
 * next_valid_state - Find next valid c-state
 * @dev: cpuidle device
 * @state: Currently selected c-state
 *
 * If the current state is valid, it is returned back to the caller.
 * Else, this function searches for a lower c-state which is still
 * valid.
 */
static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
					      struct cpuidle_state *curr)
{
	struct cpuidle_state *next = NULL;
	struct omap3_idle_statedata *cx;

	cx = cpuidle_get_statedata(curr);

	/* Check if current state is valid */
	if (cx->valid) {
		return curr;
	} else {
		int idx = OMAP3_NUM_STATES - 1;

		/*
		 * Reach the current state starting at highest C-state
		 */
		for (; idx >= 0; idx--) {
			if (&dev->states[idx] == curr) {
				next = &dev->states[idx];
				break;
			}
		}

		/*
		 * Should never hit this condition.
		 */
		WARN_ON(next == NULL);

		/*
		 * Drop to next valid state.
		 * Start search from the next (lower) state.
		 */
		idx--;
		for (; idx >= 0; idx--) {
			cx = cpuidle_get_statedata(&dev->states[idx]);
			if (cx->valid) {
				next = &dev->states[idx];
				break;
			}
		}
		/*
		 * C1 is always valid.
		 * So, no need to check for 'next==NULL' outside this loop.
		 */
	}

	return next;
}

/**
 * omap3_enter_idle_bm - Checks for any bus activity
 * @dev: cpuidle device
 * @state: The target state to be programmed
 *
 * This function checks for any pending activity and then programs
 * the device to the specified or a safer state.
 */
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
			       struct cpuidle_state *state)
{
	struct cpuidle_state *new_state = next_valid_state(dev, state);
	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
	u32 cam_state;
	struct omap3_idle_statedata *cx;
	int ret;

	if (omap3_idle_bm_check()) {
		BUG_ON(!dev->safe_state);
		new_state = dev->safe_state;
		goto select_state;
	}

	cx = cpuidle_get_statedata(state);
	core_next_state = cx->core_state;

	/*
	 * FIXME: we currently manage device-specific idle states
	 *        for PER and CORE in combination with CPU-specific
	 *        idle states.  This is wrong, and device-specific
	 *        idle management needs to be separated out into 
	 *        its own code.
	 */

	/*
	 * Prevent idle completely if CAM is active.
	 * CAM does not have wakeup capability in OMAP3.
	 */
	cam_state = pwrdm_read_pwrst(cam_pd);
	if (cam_state == PWRDM_POWER_ON) {
		new_state = dev->safe_state;
		goto select_state;
	}

	/*
	 * Prevent PER off if CORE is not in retention or off as this
	 * would disable PER wakeups completely.
	 */
	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
	if ((per_next_state == PWRDM_POWER_OFF) &&
	    (core_next_state > PWRDM_POWER_RET))
		per_next_state = PWRDM_POWER_RET;

	/* Are we changing PER target state? */
	if (per_next_state != per_saved_state)
		pwrdm_set_next_pwrst(per_pd, per_next_state);

select_state:
	dev->last_state = new_state;
	ret = omap3_enter_idle(dev, new_state);

	/* Restore original PER state if it was modified */
	if (per_next_state != per_saved_state)
		pwrdm_set_next_pwrst(per_pd, per_saved_state);

	return ret;
}

DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);

/**
 * omap3_cpuidle_update_states() - Update the cpuidle states
 * @mpu_deepest_state:	Enable states up to and including this for mpu domain
 * @core_deepest_state:	Enable states up to and including this for core domain
 *
 * This goes through the list of states available and enables and disables the
 * validity of C states based on deepest state that can be achieved for the
 * variable domain
 */
void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
{
	int i;

	for (i = 0; i < OMAP3_NUM_STATES; i++) {
		struct omap3_idle_statedata *cx = &omap3_idle_data[i];

		if ((cx->mpu_state >= mpu_deepest_state) &&
		    (cx->core_state >= core_deepest_state)) {
			cx->valid = 1;
		} else {
			cx->valid = 0;
		}
	}
}

void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
{
	int i;

	if (!cpuidle_board_params)
		return;

	for (i = 0; i < OMAP3_NUM_STATES; i++) {
		cpuidle_params_table[i].valid =	cpuidle_board_params[i].valid;
		cpuidle_params_table[i].exit_latency =
			cpuidle_board_params[i].exit_latency;
		cpuidle_params_table[i].target_residency =
			cpuidle_board_params[i].target_residency;
	}
	return;
}

struct cpuidle_driver omap3_idle_driver = {
	.name = 	"omap3_idle",
	.owner = 	THIS_MODULE,
};

/* Fill in the state data from the mach tables and register the driver_data */
static inline struct omap3_idle_statedata *_fill_cstate(
					struct cpuidle_device *dev,
					int idx, const char *descr)
{
	struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
	struct cpuidle_state *state = &dev->states[idx];

	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
	state->target_residency	= cpuidle_params_table[idx].target_residency;
	state->flags		= CPUIDLE_FLAG_TIME_VALID;
	state->enter		= omap3_enter_idle_bm;
	cx->valid		= cpuidle_params_table[idx].valid;
	sprintf(state->name, "C%d", idx + 1);
	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
	cpuidle_set_statedata(state, cx);

	return cx;
}

/**
 * omap3_idle_init - Init routine for OMAP3 idle
 *
 * Registers the OMAP3 specific cpuidle driver to the cpuidle
 * framework with the valid set of states.
 */
int __init omap3_idle_init(void)
{
	struct cpuidle_device *dev;
	struct omap3_idle_statedata *cx;

	mpu_pd = pwrdm_lookup("mpu_pwrdm");
	core_pd = pwrdm_lookup("core_pwrdm");
	per_pd = pwrdm_lookup("per_pwrdm");
	cam_pd = pwrdm_lookup("cam_pwrdm");

	cpuidle_register_driver(&omap3_idle_driver);
	dev = &per_cpu(omap3_idle_dev, smp_processor_id());

	/* C1 . MPU WFI + Core active */
	cx = _fill_cstate(dev, 0, "MPU ON + CORE ON");
	(&dev->states[0])->enter = omap3_enter_idle;
	dev->safe_state = &dev->states[0];
	cx->valid = 1;	/* C1 is always valid */
	cx->mpu_state = PWRDM_POWER_ON;
	cx->core_state = PWRDM_POWER_ON;

	/* C2 . MPU WFI + Core inactive */
	cx = _fill_cstate(dev, 1, "MPU ON + CORE ON");
	cx->mpu_state = PWRDM_POWER_ON;
	cx->core_state = PWRDM_POWER_ON;

	/* C3 . MPU CSWR + Core inactive */
	cx = _fill_cstate(dev, 2, "MPU RET + CORE ON");
	cx->mpu_state = PWRDM_POWER_RET;
	cx->core_state = PWRDM_POWER_ON;

	/* C4 . MPU OFF + Core inactive */
	cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON");
	cx->mpu_state = PWRDM_POWER_OFF;
	cx->core_state = PWRDM_POWER_ON;

	/* C5 . MPU RET + Core RET */
	cx = _fill_cstate(dev, 4, "MPU RET + CORE RET");
	cx->mpu_state = PWRDM_POWER_RET;
	cx->core_state = PWRDM_POWER_RET;

	/* C6 . MPU OFF + Core RET */
	cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET");
	cx->mpu_state = PWRDM_POWER_OFF;
	cx->core_state = PWRDM_POWER_RET;

	/* C7 . MPU OFF + Core OFF */
	cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF");
	/*
	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
	 * enable OFF mode in a stable form for previous revisions.
	 * We disable C7 state as a result.
	 */
	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
		cx->valid = 0;
		pr_warn("%s: core off state C7 disabled due to i583\n",
			__func__);
	}
	cx->mpu_state = PWRDM_POWER_OFF;
	cx->core_state = PWRDM_POWER_OFF;

	if (enable_off_mode)
		omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF);
	else
		omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET);

	dev->state_count = OMAP3_NUM_STATES;
	if (cpuidle_register_device(dev)) {
		printk(KERN_ERR "%s: CPUidle register device failed\n",
		       __func__);
		return -EIO;
	}

	return 0;
}
#else
int __init omap3_idle_init(void)
{
	return 0;
}
#endif /* CONFIG_CPU_IDLE */