summaryrefslogtreecommitdiffstats
path: root/Documentation/i2c/busses/i2c-i810
blob: 83c3b9743c3c9cf01702760452dad4fade20ff61 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Kernel driver i2c-i810

Supported adapters:
  * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
  * Intel 82845G (GMCH)

Authors: 
	Frodo Looijaard <frodol@dds.nl>, 
	Philip Edelbrock <phil@netroedge.com>,
        Kyösti Mälkki <kmalkki@cc.hut.fi>,
	Ralph Metzler <rjkm@thp.uni-koeln.de>,
	Mark D. Studebaker <mdsxyz123@yahoo.com>

Main contact: Mark Studebaker <mdsxyz123@yahoo.com>

Description 
----------- 

WARNING: If you have an '810' or '815' motherboard, your standard I2C
temperature sensors are most likely on the 801's I2C bus. You want the
i2c-i801 driver for those, not this driver.

Now for the i2c-i810...

The GMCH chip contains two I2C interfaces.

The first interface is used for DDC (Data Display Channel) which is a
serial channel through the VGA monitor connector to a DDC-compliant
monitor. This interface is defined by the Video Electronics Standards
Association (VESA). The standards are available for purchase at
http://www.vesa.org .

The second interface is a general-purpose I2C bus. It may be connected to a
TV-out chip such as the BT869 or possibly to a digital flat-panel display.

Features
-------- 

Both busses use the i2c-algo-bit driver for 'bit banging'
and support for specific transactions is provided by i2c-algo-bit.

Issues
------

If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1),
the test may fail; if so, the i2c-i810 driver won't be inserted. However,
we think this has been fixed.
OpenPOWER on IntegriCloud