summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
blob: d28295a3e55f143e6425019020cd91805360e7f1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
NVIDIA Tegra xHCI controller
============================

The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
the Tegra XUSB pad controller.

Required properties:
--------------------
- compatible: Must be:
  - Tegra124: "nvidia,tegra124-xusb"
  - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
  - Tegra210: "nvidia,tegra210-xusb"
- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
  registers and XUSB IPFS registers.
- reg-names: Must contain the following entries:
  - "hcd"
  - "fpci"
  - "ipfs"
- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
- clocks: Must contain an entry for each entry in clock-names.
  See ../clock/clock-bindings.txt for details.
- clock-names: Must include the following entries:
   - xusb_host
   - xusb_host_src
   - xusb_falcon_src
   - xusb_ss
   - xusb_ss_src
   - xusb_ss_div2
   - xusb_hs_src
   - xusb_fs_src
   - pll_u_480m
   - clk_m
   - pll_e
- resets: Must contain an entry for each entry in reset-names.
  See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
  - xusb_host
  - xusb_ss
  - xusb_src
  Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
  configure the USB pads used by the XHCI controller

For Tegra124 and Tegra132:
- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.

For Tegra210:
- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.

Optional properties:
--------------------
- phys: Must contain an entry for each entry in phy-names.
  See ../phy/phy-bindings.txt for details.
- phy-names: Should include an entry for each PHY used by the controller. The
  following PHYs are available:
  - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
  - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
  - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
              usb3-3

Example:
--------

	usb@0,70090000 {
		compatible = "nvidia,tegra124-xusb";
		reg = <0x0 0x70090000 0x0 0x8000>,
		      <0x0 0x70098000 0x0 0x1000>,
		      <0x0 0x70099000 0x0 0x1000>;
		reg-names = "hcd", "fpci", "ipfs";

		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
			 <&tegra_car TEGRA124_CLK_CLK_M>,
			 <&tegra_car TEGRA124_CLK_PLL_E>;
		clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
			      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
			      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
			      "clk_m", "pll_e";
		resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
		reset-names = "xusb_host", "xusb_ss", "xusb_src";

		nvidia,xusb-padctl = <&padctl>;

		phys = <&{/padctl@0,7009f000/pads/usb2/usb2-1}>, /* mini-PCIe USB */
		       <&{/padctl@0,7009f000/pads/usb2/usb2-2}>, /* USB A */
		       <&{/padctl@0,7009f000/pads/pcie/pcie-0}>; /* USB A */
		phy-names = "utmi-1", "utmi-2", "usb3-0";

		avddio-pex-supply = <&vdd_1v05_run>;
		dvddio-pex-supply = <&vdd_1v05_run>;
		avdd-usb-supply = <&vdd_3v3_lp0>;
		avdd-pll-utmip-supply = <&vddio_1v8>;
		avdd-pll-erefe-supply = <&avdd_1v05_run>;
		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
	};
OpenPOWER on IntegriCloud