summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd/tps65910.txt
blob: 38833e63a59f901f79578f3ec7bba01227ec770d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
TPS65910 Power Management Integrated Circuit

Required properties:
- compatible: "ti,tps65910" or "ti,tps65911"
- reg: I2C slave address
- interrupts: the interrupt outputs of the controller
- #gpio-cells: number of cells to describe a GPIO, this should be 2.
  The first cell is the GPIO number.
  The second cell is used to specify additional options <unused>.
- gpio-controller: mark the device as a GPIO controller
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
  The first cell is the IRQ number.
  The second cell is the flags, encoded as the trigger masks from
  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- regulators: This is the list of child nodes that specify the regulator
  initialization data for defined regulators. Not all regulators for the given
  device need to be present. The definition for each of these nodes is defined
  using the standard binding for regulators found at
  Documentation/devicetree/bindings/regulator/regulator.txt.
  The regulator is matched with the regulator-compatible.

  The valid regulator-compatible values are:
  tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
            vaux2, vaux33, vmmc, vbb
  tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
            ldo6, ldo7, ldo8

- xxx-supply: Input voltage supply regulator.
  These entries are require if regulators are enabled for a device. Missing of these
  properties can cause the regulator registration fails.
  If some of input supply is powered through battery or always-on supply then
  also it is require to have these parameters with proper node handle of always
  on power supply.
  tps65910:
	vcc1-supply: VDD1 input.
	vcc2-supply: VDD2 input.
	vcc3-supply: VAUX33 and VMMC input.
	vcc4-supply: VAUX1 and VAUX2 input.
	vcc5-supply: VPLL and VDAC input.
	vcc6-supply: VDIG1 and VDIG2 input.
	vcc7-supply: VRTC and VBB input.
	vccio-supply: VIO input.
  tps65911:
	vcc1-supply: VDD1 input.
	vcc2-supply: VDD2 input.
	vcc3-supply: LDO6, LDO7 and LDO8 input.
	vcc4-supply: LDO5 input.
	vcc5-supply: LDO3 and LDO4 input.
	vcc6-supply: LDO1 and LDO2 input.
	vcc7-supply: VRTC input.
	vccio-supply: VIO input.

Optional properties:
- ti,vmbch-threshold: (tps65911) main battery charged threshold
  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
  in TPS6591X datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
  There should be 9 entries here, one for each gpio.
- ti,system-power-controller: Telling whether or not this pmic is controlling
  the system power.

Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep
  control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
  If this property is not defined, it defaults to 0 (not enabled).

Example:

	pmu: tps65910@d2 {
		compatible = "ti,tps65910";
		reg = <0xd2>;
		interrupt-parent = <&intc>;
		interrupts = < 0 118 0x04 >;

		#gpio-cells = <2>;
		gpio-controller;

		#interrupt-cells = <2>;
		interrupt-controller;

		ti,system-power-controller;

		ti,vmbch-threshold = 0;
		ti,vmbch2-threshold = 0;
		ti,en-ck32k-xtal;
		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;

		vcc1-supply = <&reg_parent>;
		vcc2-supply = <&some_reg>;
		vcc3-supply = <...>;
		vcc4-supply = <...>;
		vcc5-supply = <...>;
		vcc6-supply = <...>;
		vcc7-supply = <...>;
		vccio-supply = <...>;

		regulators {
			#address-cells = <1>;
			#size-cells = <0>;

			vdd1_reg: regulator@0 {
				regulator-compatible = "vdd1";
				reg = <0>;
				regulator-min-microvolt = < 600000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
				ti,regulator-ext-sleep-control = <0>;
			};
			vdd2_reg: regulator@1 {
				regulator-compatible = "vdd2";
				reg = <1>;
				regulator-min-microvolt = < 600000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
				ti,regulator-ext-sleep-control = <4>;
			};
			vddctrl_reg: regulator@2 {
				regulator-compatible = "vddctrl";
				reg = <2>;
				regulator-min-microvolt = < 600000>;
				regulator-max-microvolt = <1400000>;
				regulator-always-on;
				regulator-boot-on;
				ti,regulator-ext-sleep-control = <0>;
			};
			vio_reg: regulator@3 {
				regulator-compatible = "vio";
				reg = <3>;
				regulator-min-microvolt = <1500000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
				ti,regulator-ext-sleep-control = <1>;
			};
			ldo1_reg: regulator@4 {
				regulator-compatible = "ldo1";
				reg = <4>;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3300000>;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo2_reg: regulator@5 {
				regulator-compatible = "ldo2";
				reg = <5>;
				regulator-min-microvolt = <1050000>;
				regulator-max-microvolt = <1050000>;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo3_reg: regulator@6 {
				regulator-compatible = "ldo3";
				reg = <6>;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3300000>;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo4_reg: regulator@7 {
				regulator-compatible = "ldo4";
				reg = <7>;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo5_reg: regulator@8 {
				regulator-compatible = "ldo5";
				reg = <8>;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3300000>;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo6_reg: regulator@9 {
				regulator-compatible = "ldo6";
				reg = <9>;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				ti,regulator-ext-sleep-control = <0>;
			};
			ldo7_reg: regulator@10 {
				regulator-compatible = "ldo7";
				reg = <10>;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
				regulator-boot-on;
				ti,regulator-ext-sleep-control = <1>;
			};
			ldo8_reg: regulator@11 {
				regulator-compatible = "ldo8";
				reg = <11>;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				ti,regulator-ext-sleep-control = <1>;
			};
		};
	};
OpenPOWER on IntegriCloud