/* * Low-level ALSA driver for the ENSONIQ SoundScape PnP * Copyright (c) by Chris Rankin * * This driver was written in part using information obtained from * the OSS/Free SoundScape driver, written by Hannu Savolainen. * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <sound/driver.h> #include <linux/init.h> #include <linux/err.h> #include <linux/isa.h> #include <linux/delay.h> #include <linux/pnp.h> #include <linux/spinlock.h> #include <linux/moduleparam.h> #include <asm/dma.h> #include <sound/core.h> #include <sound/hwdep.h> #include <sound/cs4231.h> #include <sound/mpu401.h> #include <sound/initval.h> #include <sound/sscape_ioctl.h> MODULE_AUTHOR("Chris Rankin"); MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver"); MODULE_LICENSE("GPL"); static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX; static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR; static long port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT; static long wss_port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT; static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA; static int dma2[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "Description for SoundScape card"); module_param_array(port, long, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SoundScape driver."); module_param_array(wss_port, long, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); module_param_array(irq, int, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); module_param_array(mpu_irq, int, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); module_param_array(dma, int, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); module_param_array(dma2, int, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; static struct pnp_card_device_id sscape_pnpids[] = { { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */ { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */ { .id = "" } /* end */ }; MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #endif #define MPU401_IO(i) ((i) + 0) #define MIDI_DATA_IO(i) ((i) + 0) #define MIDI_CTRL_IO(i) ((i) + 1) #define HOST_CTRL_IO(i) ((i) + 2) #define HOST_DATA_IO(i) ((i) + 3) #define ODIE_ADDR_IO(i) ((i) + 4) #define ODIE_DATA_IO(i) ((i) + 5) #define CODEC_IO(i) ((i) + 8) #define IC_ODIE 1 #define IC_OPUS 2 #define RX_READY 0x01 #define TX_READY 0x02 #define CMD_ACK 0x80 #define CMD_SET_MIDI_VOL 0x84 #define CMD_GET_MIDI_VOL 0x85 #define CMD_XXX_MIDI_VOL 0x86 #define CMD_SET_EXTMIDI 0x8a #define CMD_GET_EXTMIDI 0x8b #define CMD_SET_MT32 0x8c #define CMD_GET_MT32 0x8d enum GA_REG { GA_INTSTAT_REG = 0, GA_INTENA_REG, GA_DMAA_REG, GA_DMAB_REG, GA_INTCFG_REG, GA_DMACFG_REG, GA_CDCFG_REG, GA_SMCFGA_REG, GA_SMCFGB_REG, GA_HMCTL_REG }; #define DMA_8BIT 0x80 #define AD1845_FREQ_SEL_MSB 0x16 #define AD1845_FREQ_SEL_LSB 0x17 enum card_type { SSCAPE, SSCAPE_PNP, SSCAPE_VIVO, }; struct soundscape { spinlock_t lock; unsigned io_base; unsigned wss_base; int codec_type; int ic_type; enum card_type type; struct resource *io_res; struct resource *wss_res; struct snd_cs4231 *chip; struct snd_mpu401 *mpu; struct snd_hwdep *hw; /* * The MIDI device won't work until we've loaded * its firmware via a hardware-dependent device IOCTL */ spinlock_t fwlock; int hw_in_use; unsigned long midi_usage; unsigned char midi_vol; }; #define INVALID_IRQ ((unsigned)-1) static inline struct soundscape *get_card_soundscape(struct snd_card *c) { return (struct soundscape *) (c->private_data); } static inline struct soundscape *get_mpu401_soundscape(struct snd_mpu401 * mpu) { return (struct soundscape *) (mpu->private_data); } static inline struct soundscape *get_hwdep_soundscape(struct snd_hwdep * hw) { return (struct soundscape *) (hw->private_data); } /* * Allocates some kernel memory that we can use for DMA. * I think this means that the memory has to map to * contiguous pages of physical memory. */ static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size) { if (buf) { if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(), size, buf) < 0) { snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size); return NULL; } } return buf; } /* * Release the DMA-able kernel memory ... */ static void free_dmabuf(struct snd_dma_buffer *buf) { if (buf && buf->area) snd_dma_free_pages(buf); } /* * This function writes to the SoundScape's control registers, * but doesn't do any locking. It's up to the caller to do that. * This is why this function is "unsafe" ... */ static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val) { outb(reg, ODIE_ADDR_IO(io_base)); outb(val, ODIE_DATA_IO(io_base)); } /* * Write to the SoundScape's control registers, and do the * necessary locking ... */ static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val) { unsigned long flags; spin_lock_irqsave(&s->lock, flags); sscape_write_unsafe(s->io_base, reg, val); spin_unlock_irqrestore(&s->lock, flags); } /* * Read from the SoundScape's control registers, but leave any * locking to the caller. This is why the function is "unsafe" ... */ static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg) { outb(reg, ODIE_ADDR_IO(io_base)); return inb(ODIE_DATA_IO(io_base)); } /* * Puts the SoundScape into "host" mode, as compared to "MIDI" mode */ static inline void set_host_mode_unsafe(unsigned io_base) { outb(0x0, HOST_CTRL_IO(io_base)); } /* * Puts the SoundScape into "MIDI" mode, as compared to "host" mode */ static inline void set_midi_mode_unsafe(unsigned io_base) { outb(0x3, HOST_CTRL_IO(io_base)); } /* * Read the SoundScape's host-mode control register, but leave * any locking issues to the caller ... */ static inline int host_read_unsafe(unsigned io_base) { int data = -1; if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) { data = inb(HOST_DATA_IO(io_base)); } return data; } /* * Read the SoundScape's host-mode control register, performing * a limited amount of busy-waiting if the register isn't ready. * Also leaves all locking-issues to the caller ... */ static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) { int data; while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) { udelay(100); --timeout; } /* while */ return data; } /* * Write to the SoundScape's host-mode control registers, but * leave any locking issues to the caller ... */ static inline int host_write_unsafe(unsigned io_base, unsigned char data) { if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) { outb(data, HOST_DATA_IO(io_base)); return 1; } return 0; } /* * Write to the SoundScape's host-mode control registers, performing * a limited amount of busy-waiting if the register isn't ready. * Also leaves all locking-issues to the caller ... */ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, unsigned timeout) { int err; while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) { udelay(100); --timeout; } /* while */ return err; } /* * Check that the MIDI subsystem is operational. If it isn't, * then we will hang the computer if we try to use it ... * * NOTE: This check is based upon observation, not documentation. */ static inline int verify_mpu401(const struct snd_mpu401 * mpu) { return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80); } /* * This is apparently the standard way to initailise an MPU-401 */ static inline void initialise_mpu401(const struct snd_mpu401 * mpu) { outb(0, MIDI_DATA_IO(mpu->port)); } /* * Tell the SoundScape to activate the AD1845 chip (I think). * The AD1845 detection fails if we *don't* do this, so I * think that this is a good idea ... */ static inline void activate_ad1845_unsafe(unsigned io_base) { sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10); sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); } /* * Do the necessary ALSA-level cleanup to deallocate our driver ... */ static void soundscape_free(struct snd_card *c) { struct soundscape *sscape = get_card_soundscape(c); release_and_free_resource(sscape->io_res); release_and_free_resource(sscape->wss_res); free_dma(sscape->chip->dma1); } /* * Tell the SoundScape to begin a DMA tranfer using the given channel. * All locking issues are left to the caller. */ static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) { sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01); sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe); } /* * Wait for a DMA transfer to complete. This is a "limited busy-wait", * and all locking issues are left to the caller. */ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout) { while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { udelay(100); --timeout; } /* while */ return (sscape_read_unsafe(io_base, reg) & 0x01); } /* * Wait for the On-Board Processor to return its start-up * acknowledgement sequence. This wait is too long for * us to perform "busy-waiting", and so we must sleep. * This in turn means that we must not be holding any * spinlocks when we call this function. */ static int obp_startup_ack(struct soundscape *s, unsigned timeout) { while (timeout != 0) { unsigned long flags; unsigned char x; schedule_timeout_uninterruptible(1); spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if ((x & 0xfe) == 0xfe) return 1; --timeout; } /* while */ return 0; } /* * Wait for the host to return its start-up acknowledgement * sequence. This wait is too long for us to perform * "busy-waiting", and so we must sleep. This in turn means * that we must not be holding any spinlocks when we call * this function. */ static int host_startup_ack(struct soundscape *s, unsigned timeout) { while (timeout != 0) { unsigned long flags; unsigned char x; schedule_timeout_uninterruptible(1); spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if (x == 0xfe) return 1; --timeout; } /* while */ return 0; } /* * Upload a byte-stream into the SoundScape using DMA channel A. */ static int upload_dma_data(struct soundscape *s, const unsigned char __user *data, size_t size) { unsigned long flags; struct snd_dma_buffer dma; int ret; if (!get_dmabuf(&dma, PAGE_ALIGN(size))) return -ENOMEM; spin_lock_irqsave(&s->lock, flags); /* * Reset the board ... */ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f); /* * Enable the DMA channels and configure them ... */ sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50); sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); /* * Take the board out of reset ... */ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); /* * Upload the user's data (firmware?) to the SoundScape * board through the DMA channel ... */ while (size != 0) { unsigned long len; /* * Apparently, copying to/from userspace can sleep. * We are therefore forbidden from holding any * spinlocks while we copy ... */ spin_unlock_irqrestore(&s->lock, flags); /* * Remember that the data that we want to DMA * comes from USERSPACE. We have already verified * the userspace pointer ... */ len = min(size, dma.bytes); len -= __copy_from_user(dma.area, data, len); data += len; size -= len; /* * Grab that spinlock again, now that we've * finished copying! */ spin_lock_irqsave(&s->lock, flags); snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE); sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { /* * Don't forget to release this spinlock we're holding ... */ spin_unlock_irqrestore(&s->lock, flags); snd_printk(KERN_ERR "sscape: DMA upload has timed out\n"); ret = -EAGAIN; goto _release_dma; } } /* while */ set_host_mode_unsafe(s->io_base); /* * Boot the board ... (I think) */ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40); spin_unlock_irqrestore(&s->lock, flags); /* * If all has gone well, then the board should acknowledge * the new upload and tell us that it has rebooted OK. We * give it 5 seconds (max) ... */ ret = 0; if (!obp_startup_ack(s, 5)) { snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n"); ret = -EAGAIN; } else if (!host_startup_ack(s, 5)) { snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n"); ret = -EAGAIN; } _release_dma: /* * NOTE!!! We are NOT holding any spinlocks at this point !!! */ sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40)); free_dmabuf(&dma); return ret; } /* * Upload the bootblock(?) into the SoundScape. The only * purpose of this block of code seems to be to tell * us which version of the microcode we should be using. * * NOTE: The boot-block data resides in USER-SPACE!!! * However, we have already verified its memory * addresses by the time we get here. */ static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb) { unsigned long flags; int data = 0; int ret; ret = upload_dma_data(sscape, bb->code, sizeof(bb->code)); spin_lock_irqsave(&sscape->lock, flags); if (ret == 0) { data = host_read_ctrl_unsafe(sscape->io_base, 100); } set_midi_mode_unsafe(sscape->io_base); spin_unlock_irqrestore(&sscape->lock, flags); if (ret == 0) { if (data < 0) { snd_printk(KERN_ERR "sscape: timeout reading firmware version\n"); ret = -EAGAIN; } else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) { ret = -EFAULT; } } return ret; } /* * Upload the microcode into the SoundScape. The * microcode is 64K of data, and if we try to copy * it into a local variable then we will SMASH THE * KERNEL'S STACK! We therefore leave it in USER * SPACE, and save ourselves from copying it at all. */ static int sscape_upload_microcode(struct soundscape *sscape, const struct sscape_microcode __user *mc) { unsigned long flags; char __user *code; int err; /* * We are going to have to copy this data into a special * DMA-able buffer before we can upload it. We shall therefore * just check that the data pointer is valid for now. * * NOTE: This buffer is 64K long! That's WAY too big to * copy into a stack-temporary anyway. */ if ( get_user(code, &mc->code) || !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) ) return -EFAULT; if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) { snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n"); } spin_lock_irqsave(&sscape->lock, flags); set_midi_mode_unsafe(sscape->io_base); spin_unlock_irqrestore(&sscape->lock, flags); initialise_mpu401(sscape->mpu); return err; } /* * Hardware-specific device functions, to implement special * IOCTLs for the SoundScape card. This is how we upload * the microcode into the card, for example, and so we * must ensure that no two processes can open this device * simultaneously, and that we can't open it at all if * someone is using the MIDI device. */ static int sscape_hw_open(struct snd_hwdep * hw, struct file *file) { register struct soundscape *sscape = get_hwdep_soundscape(hw); unsigned long flags; int err; spin_lock_irqsave(&sscape->fwlock, flags); if ((sscape->midi_usage != 0) || sscape->hw_in_use) { err = -EBUSY; } else { sscape->hw_in_use = 1; err = 0; } spin_unlock_irqrestore(&sscape->fwlock, flags); return err; } static int sscape_hw_release(struct snd_hwdep * hw, struct file *file) { register struct soundscape *sscape = get_hwdep_soundscape(hw); unsigned long flags; spin_lock_irqsave(&sscape->fwlock, flags); sscape->hw_in_use = 0; spin_unlock_irqrestore(&sscape->fwlock, flags); return 0; } static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file, unsigned int cmd, unsigned long arg) { struct soundscape *sscape = get_hwdep_soundscape(hw); int err = -EBUSY; switch (cmd) { case SND_SSCAPE_LOAD_BOOTB: { register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg; /* * We are going to have to copy this data into a special * DMA-able buffer before we can upload it. We shall therefore * just check that the data pointer is valid for now ... */ if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) ) return -EFAULT; /* * Now check that we can write the firmware version number too... */ if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) ) return -EFAULT; err = sscape_upload_bootblock(sscape, bb); } break; case SND_SSCAPE_LOAD_MCODE: { register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg; err = sscape_upload_microcode(sscape, mc); } break; default: err = -EINVAL; break; } /* switch */ return err; } /* * Mixer control for the SoundScape's MIDI device. */ static int sscape_midi_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 127; return 0; } static int sscape_midi_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *uctl) { struct snd_cs4231 *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; register struct soundscape *s = get_card_soundscape(card); unsigned long flags; spin_lock_irqsave(&s->lock, flags); set_host_mode_unsafe(s->io_base); if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) { uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100); } set_midi_mode_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); return 0; } static int sscape_midi_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *uctl) { struct snd_cs4231 *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; register struct soundscape *s = get_card_soundscape(card); unsigned long flags; int change; spin_lock_irqsave(&s->lock, flags); /* * We need to put the board into HOST mode before we * can send any volume-changing HOST commands ... */ set_host_mode_unsafe(s->io_base); /* * To successfully change the MIDI volume setting, you seem to * have to write a volume command, write the new volume value, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { change = 0; goto __skip_change; } change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); __skip_change: /* * Take the board out of HOST mode and back into MIDI mode ... */ set_midi_mode_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); return change; } static struct snd_kcontrol_new midi_mixer_ctl = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "MIDI", .info = sscape_midi_info, .get = sscape_midi_get, .put = sscape_midi_put }; /* * The SoundScape can use two IRQs from a possible set of four. * These IRQs are encoded as bit patterns so that they can be * written to the control registers. */ static unsigned __devinit get_irq_config(int irq) { static const int valid_irq[] = { 9, 5, 7, 10 }; unsigned cfg; for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) { if (irq == valid_irq[cfg]) return cfg; } /* for */ return INVALID_IRQ; } /* * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ static int __devinit detect_sscape(struct soundscape *s) { unsigned long flags; unsigned d; int retval = 0; int codec = s->wss_base; spin_lock_irqsave(&s->lock, flags); /* * The following code is lifted from the original OSS driver, * and as I don't have a datasheet I cannot really comment * on what it is doing... */ if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0) goto _done; d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0; if ((d & 0x80) != 0) goto _done; if (d == 0) { s->codec_type = 1; s->ic_type = IC_ODIE; } else if ((d & 0x60) != 0) { s->codec_type = 2; s->ic_type = IC_OPUS; } else goto _done; outb(0xfa, ODIE_ADDR_IO(s->io_base)); if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a) goto _done; outb(0xfe, ODIE_ADDR_IO(s->io_base)); if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e) goto _done; outb(0xfe, ODIE_ADDR_IO(s->io_base)); d = inb(ODIE_DATA_IO(s->io_base)); if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e) goto _done; d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); if (s->type == SSCAPE_VIVO) codec += 4; /* wait for WSS codec */ for (d = 0; d < 500; d++) { if ((inb(codec) & 0x80) == 0) break; spin_unlock_irqrestore(&s->lock, flags); msleep(1); spin_lock_irqsave(&s->lock, flags); } snd_printd(KERN_INFO "init delay = %d ms\n", d); /* * SoundScape successfully detected! */ retval = 1; _done: spin_unlock_irqrestore(&s->lock, flags); return retval; } /* * ALSA callback function, called when attempting to open the MIDI device. * Check that the MIDI firmware has been loaded, because we don't want * to crash the machine. Also check that someone isn't using the hardware * IOCTL device. */ static int mpu401_open(struct snd_mpu401 * mpu) { int err; if (!verify_mpu401(mpu)) { snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n"); err = -ENODEV; } else { register struct soundscape *sscape = get_mpu401_soundscape(mpu); unsigned long flags; spin_lock_irqsave(&sscape->fwlock, flags); if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) { err = -EBUSY; } else { ++(sscape->midi_usage); err = 0; } spin_unlock_irqrestore(&sscape->fwlock, flags); } return err; } static void mpu401_close(struct snd_mpu401 * mpu) { register struct soundscape *sscape = get_mpu401_soundscape(mpu); unsigned long flags; spin_lock_irqsave(&sscape->fwlock, flags); --(sscape->midi_usage); spin_unlock_irqrestore(&sscape->fwlock, flags); } /* * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. */ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq) { struct soundscape *sscape = get_card_soundscape(card); struct snd_rawmidi *rawmidi; int err; if ((err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port, MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED, &rawmidi)) == 0) { struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data; mpu->open_input = mpu401_open; mpu->open_output = mpu401_open; mpu->close_input = mpu401_close; mpu->close_output = mpu401_close; mpu->private_data = sscape; sscape->mpu = mpu; initialise_mpu401(mpu); } return err; } /* * Override for the CS4231 playback format function. * The AD1845 has much simpler format and rate selection. */ static void ad1845_playback_format(struct snd_cs4231 * chip, struct snd_pcm_hw_params *params, unsigned char format) { unsigned long flags; unsigned rate = params_rate(params); /* * The AD1845 can't handle sample frequencies * outside of 4 kHZ to 50 kHZ */ if (rate > 50000) rate = 50000; else if (rate < 4000) rate = 4000; spin_lock_irqsave(&chip->reg_lock, flags); /* * Program the AD1845 correctly for the playback stream. * Note that we do NOT need to toggle the MCE bit because * the PLAYBACK_ENABLE bit of the Interface Configuration * register is set. * * NOTE: We seem to need to write to the MSB before the LSB * to get the correct sample frequency. */ snd_cs4231_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); spin_unlock_irqrestore(&chip->reg_lock, flags); } /* * Override for the CS4231 capture format function. * The AD1845 has much simpler format and rate selection. */ static void ad1845_capture_format(struct snd_cs4231 * chip, struct snd_pcm_hw_params *params, unsigned char format) { unsigned long flags; unsigned rate = params_rate(params); /* * The AD1845 can't handle sample frequencies * outside of 4 kHZ to 50 kHZ */ if (rate > 50000) rate = 50000; else if (rate < 4000) rate = 4000; spin_lock_irqsave(&chip->reg_lock, flags); /* * Program the AD1845 correctly for the playback stream. * Note that we do NOT need to toggle the MCE bit because * the CAPTURE_ENABLE bit of the Interface Configuration * register is set. * * NOTE: We seem to need to write to the MSB before the LSB * to get the correct sample frequency. */ snd_cs4231_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); spin_unlock_irqrestore(&chip->reg_lock, flags); } /* * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 * is very much like a CS4231, with a few extra bits. We will * try to support at least some of the extra bits by overriding * some of the CS4231 callback. */ static int __devinit create_ad1845(struct snd_card *card, unsigned port, int irq, int dma1, int dma2) { register struct soundscape *sscape = get_card_soundscape(card); struct snd_cs4231 *chip; int err; if (sscape->type == SSCAPE_VIVO) port += 4; if (dma1 == dma2) dma2 = -1; err = snd_cs4231_create(card, port, -1, irq, dma1, dma2, CS4231_HW_DETECT, CS4231_HWSHARE_DMA1, &chip); if (!err) { unsigned long flags; struct snd_pcm *pcm; #define AD1845_FREQ_SEL_ENABLE 0x08 #define AD1845_PWR_DOWN_CTRL 0x1b #define AD1845_CRYS_CLOCK_SEL 0x1d /* * It turns out that the PLAYBACK_ENABLE bit is set * by the lowlevel driver ... * #define AD1845_IFACE_CONFIG \ (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE) snd_cs4231_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); snd_cs4231_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_cs4231_mce_down(chip); */ if (sscape->type != SSCAPE_VIVO) { int val; /* * The input clock frequency on the SoundScape must * be 14.31818 MHz, because we must set this register * to get the playback to sound correct ... */ snd_cs4231_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); snd_cs4231_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_cs4231_mce_down(chip); /* * More custom configuration: * a) select "mode 2" and provide a current drive of 8mA * b) enable frequency selection (for capture/playback) */ spin_lock_irqsave(&chip->reg_lock, flags); snd_cs4231_out(chip, CS4231_MISC_INFO, CS4231_MODE2 | 0x10); val = snd_cs4231_in(chip, AD1845_PWR_DOWN_CTRL); snd_cs4231_out(chip, AD1845_PWR_DOWN_CTRL, val | AD1845_FREQ_SEL_ENABLE); spin_unlock_irqrestore(&chip->reg_lock, flags); } err = snd_cs4231_pcm(chip, 0, &pcm); if (err < 0) { snd_printk(KERN_ERR "sscape: No PCM device " "for AD1845 chip\n"); goto _error; } err = snd_cs4231_mixer(chip); if (err < 0) { snd_printk(KERN_ERR "sscape: No mixer device " "for AD1845 chip\n"); goto _error; } err = snd_cs4231_timer(chip, 0, NULL); if (err < 0) { snd_printk(KERN_ERR "sscape: No timer device " "for AD1845 chip\n"); goto _error; } if (sscape->type != SSCAPE_VIVO) { err = snd_ctl_add(card, snd_ctl_new1(&midi_mixer_ctl, chip)); if (err < 0) { snd_printk(KERN_ERR "sscape: Could not create " "MIDI mixer control\n"); goto _error; } chip->set_playback_format = ad1845_playback_format; chip->set_capture_format = ad1845_capture_format; } strcpy(card->driver, "SoundScape"); strcpy(card->shortname, pcm->name); snprintf(card->longname, sizeof(card->longname), "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n", pcm->name, chip->port, chip->irq, chip->dma1, chip->dma2); sscape->chip = chip; } _error: return err; } /* * Create an ALSA soundcard entry for the SoundScape, using * the given list of port, IRQ and DMA resources. */ static int __devinit create_sscape(int dev, struct snd_card *card) { struct soundscape *sscape = get_card_soundscape(card); unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; unsigned xport; struct resource *io_res; struct resource *wss_res; unsigned long flags; int err; /* * Check that the user didn't pass us garbage data ... */ irq_cfg = get_irq_config(irq[dev]); if (irq_cfg == INVALID_IRQ) { snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]); return -ENXIO; } mpu_irq_cfg = get_irq_config(mpu_irq[dev]); if (mpu_irq_cfg == INVALID_IRQ) { printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); return -ENXIO; } xport = port[dev]; /* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ io_res = request_region(xport, 8, "SoundScape"); if (!io_res) { snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport); return -EBUSY; } wss_res = NULL; if (sscape->type == SSCAPE_VIVO) { wss_res = request_region(wss_port[dev], 4, "SoundScape"); if (!wss_res) { snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n", wss_port[dev]); err = -EBUSY; goto _release_region; } } /* * Grab one DMA channel ... */ err = request_dma(dma[dev], "SoundScape"); if (err < 0) { snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]); goto _release_region; } spin_lock_init(&sscape->lock); spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; sscape->wss_res = wss_res; sscape->io_base = xport; sscape->wss_base = wss_port[dev]; if (!detect_sscape(sscape)) { printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); err = -ENODEV; goto _release_dma; } printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n", sscape->io_base, irq[dev], dma[dev]); if (sscape->type != SSCAPE_VIVO) { /* * Now create the hardware-specific device so that we can * load the microcode into the on-board processor. * We cannot use the MPU-401 MIDI system until this firmware * has been loaded into the card. */ err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw)); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " "firmware device\n"); goto _release_dma; } strlcpy(sscape->hw->name, "SoundScape M68K", sizeof(sscape->hw->name)); sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0'; sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE; sscape->hw->ops.open = sscape_hw_open; sscape->hw->ops.release = sscape_hw_release; sscape->hw->ops.ioctl = sscape_hw_ioctl; sscape->hw->private_data = sscape; } /* * Tell the on-board devices where their resources are (I think - * I can't be sure without a datasheet ... So many magic values!) */ spin_lock_irqsave(&sscape->lock, flags); activate_ad1845_unsafe(sscape->io_base); sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); /* * Enable and configure the DMA channels ... */ sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50); dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40); sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg); sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20); sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg); sscape_write_unsafe(sscape->io_base, GA_CDCFG_REG, 0x09 | DMA_8BIT | (dma[dev] << 4) | (irq_cfg << 1)); spin_unlock_irqrestore(&sscape->lock, flags); /* * We have now enabled the codec chip, and so we should * detect the AD1845 device ... */ err = create_ad1845(card, wss_port[dev], irq[dev], dma[dev], dma2[dev]); if (err < 0) { printk(KERN_ERR "sscape: No AD1845 device at 0x%lx, IRQ %d\n", wss_port[dev], irq[dev]); goto _release_dma; } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { err = create_mpu401(card, MIDI_DEVNUM, MPU401_IO(xport), mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " "MPU-401 device at 0x%x\n", MPU401_IO(xport)); goto _release_dma; } /* * Enable the master IRQ ... */ sscape_write(sscape, GA_INTENA_REG, 0x80); /* * Initialize mixer */ sscape->midi_vol = 0; host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); host_write_ctrl_unsafe(sscape->io_base, 0, 100); host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100); } /* * Now that we have successfully created this sound card, * it is safe to store the pointer. * NOTE: we only register the sound card's "destructor" * function now that our "constructor" has completed. */ card->private_free = soundscape_free; return 0; _release_dma: free_dma(dma[dev]); _release_region: release_and_free_resource(wss_res); release_and_free_resource(io_res); return err; } static int __devinit snd_sscape_match(struct device *pdev, unsigned int i) { /* * Make sure we were given ALL of the other parameters. */ if (port[i] == SNDRV_AUTO_PORT) return 0; if (irq[i] == SNDRV_AUTO_IRQ || mpu_irq[i] == SNDRV_AUTO_IRQ || dma[i] == SNDRV_AUTO_DMA) { printk(KERN_INFO "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n"); return 0; } return 1; } static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev) { struct snd_card *card; struct soundscape *sscape; int ret; card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct soundscape)); if (!card) return -ENOMEM; sscape = get_card_soundscape(card); sscape->type = SSCAPE; dma[dev] &= 0x03; ret = create_sscape(dev, card); if (ret < 0) goto _release_card; snd_card_set_dev(card, pdev); if ((ret = snd_card_register(card)) < 0) { printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; } dev_set_drvdata(pdev, card); return 0; _release_card: snd_card_free(card); return ret; } static int __devexit snd_sscape_remove(struct device *devptr, unsigned int dev) { snd_card_free(dev_get_drvdata(devptr)); dev_set_drvdata(devptr, NULL); return 0; } #define DEV_NAME "sscape" static struct isa_driver snd_sscape_driver = { .match = snd_sscape_match, .probe = snd_sscape_probe, .remove = __devexit_p(snd_sscape_remove), /* FIXME: suspend/resume */ .driver = { .name = DEV_NAME }, }; #ifdef CONFIG_PNP static inline int __devinit get_next_autoindex(int i) { while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT) ++i; return i; } static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, const struct pnp_card_device_id *pid) { static int idx = 0; struct pnp_dev *dev; struct snd_card *card; struct soundscape *sscape; int ret; /* * Allow this function to fail *quietly* if all the ISA PnP * devices were configured using module parameters instead. */ if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS) return -ENOSPC; /* * We have found a candidate ISA PnP card. Now we * have to check that it has the devices that we * expect it to have. * * We will NOT try and autoconfigure all of the resources * needed and then activate the card as we are assuming that * has already been done at boot-time using /proc/isapnp. * We shall simply try to give each active card the resources * that it wants. This is a sensible strategy for a modular * system where unused modules are unloaded regularly. * * This strategy is utterly useless if we compile the driver * into the kernel, of course. */ // printk(KERN_INFO "sscape: %s\n", card->name); /* * Check that we still have room for another sound card ... */ dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); if (! dev) return -ENODEV; if (!pnp_is_active(dev)) { if (pnp_activate_dev(dev) < 0) { printk(KERN_INFO "sscape: device is inactive\n"); return -EBUSY; } } /* * Create a new ALSA sound card entry, in anticipation * of detecting our hardware ... */ card = snd_card_new(index[idx], id[idx], THIS_MODULE, sizeof(struct soundscape)); if (!card) return -ENOMEM; sscape = get_card_soundscape(card); /* * Identify card model ... */ if (!strncmp("ENS4081", pid->id, 7)) sscape->type = SSCAPE_VIVO; else sscape->type = SSCAPE_PNP; /* * Read the correct parameters off the ISA PnP bus ... */ port[idx] = pnp_port_start(dev, 0); irq[idx] = pnp_irq(dev, 0); mpu_irq[idx] = pnp_irq(dev, 1); dma[idx] = pnp_dma(dev, 0) & 0x03; if (sscape->type == SSCAPE_PNP) { dma2[idx] = dma[idx]; wss_port[idx] = CODEC_IO(port[idx]); } else { wss_port[idx] = pnp_port_start(dev, 1); dma2[idx] = pnp_dma(dev, 1); } ret = create_sscape(idx, card); if (ret < 0) goto _release_card; snd_card_set_dev(card, &pcard->card->dev); if ((ret = snd_card_register(card)) < 0) { printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; } pnp_set_card_drvdata(pcard, card); ++idx; return 0; _release_card: snd_card_free(card); return ret; } static void __devexit sscape_pnp_remove(struct pnp_card_link * pcard) { snd_card_free(pnp_get_card_drvdata(pcard)); pnp_set_card_drvdata(pcard, NULL); } static struct pnp_card_driver sscape_pnpc_driver = { .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .name = "sscape", .id_table = sscape_pnpids, .probe = sscape_pnp_detect, .remove = __devexit_p(sscape_pnp_remove), }; #endif /* CONFIG_PNP */ static int __init sscape_init(void) { int err; err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS); #ifdef CONFIG_PNP if (!err) isa_registered = 1; err = pnp_register_card_driver(&sscape_pnpc_driver); if (!err) pnp_registered = 1; if (isa_registered) err = 0; #endif return err; } static void __exit sscape_exit(void) { #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&sscape_pnpc_driver); if (isa_registered) #endif isa_unregister_driver(&snd_sscape_driver); } module_init(sscape_init); module_exit(sscape_exit);